1 22w0 Hollow Sections

E U R O P E A N

D E L I V E RYP R O G R A M M E

Hollow sections

EN

DIN

BS

NFA

Steel pipe as basisVan Leeuwen Buizen is an international supplier of steel pipe, hollow sections, fittings, flanges and valves - all

quality products made by respected manufacturers and suppliers. Each product has a wide range of applications

and is used in many varied constructions

A customized range

The wide product range is regularly matched to customers’ specifications. An extensive spectrum combined

with meticulously planned distribution facilities guarantees that customers will have the products when they

need them. Van Leeuwen Buizen also offers customized treatments, logistics, technical advice and other

specialist services.

The company is active in many industrial

sectors; its customers include:

� Construction companies

� Installation companies

� Energy companies

� Mechanical engineering companies

� Pipeline contractors

� Shipbuilding companies

� Petrochemical plants

� Trading companies

Van Leeuwen Buizen is part of Van Leeuwen Pipe and Tube Group, a global distributor in (carbon and stainless)

steel pipe, hollow sections, pipe components and valves. Its various European subsidiaries work closely together

to guarantee their customers an optimum level of service and to provide them with a package of

products and services that is as consistent and comprehensive as possible.

The organization operates in line with the ISO 9002 quality norms.

European delivery programme for hollow sections

Our delivery programme provides the fullest possible overview of our range of steel hollow sections. It also

supplies technical information. If you require additional data on dimensions or more information, we

recommend you to contact us.

Other delivery programmes

Van Leeuwen Pipe and Tube Group also publishes details of other delivery programmes:

� European delivery programme for Round Pipe

� European delivery programme for Pipe Components

� Delivery programme for Valves

� European delivery programme for Precision Tubes, Bar Steel and Components

� Stock Programme and Technical Information on Stainless Steel

Lindtsedijk 100, 3336 LE Zwijndrecht, the NetherlandsTelephone +31 78 625 25 25Fax +31 78 625 20 20E-mail [email protected] Internet www.vanleeuwenbuizen.com

Schaarbeeklei 189, 1800 Vilvoorde, BelgiumTelephone +32 2 2554000Fax +32 2 2520576E-mail [email protected] Internet www.vanleeuwen.be

Every care has been taken in

preparing this delivery programme.

However, our delivery programme

is constantly being updated,

and changes may be made to

the items supplied. Van Leeuwen

Buizen accepts no liability for any

inaccuracies and/or omissions in

the published stock and technical

details.

Edition August 2002

Europeandeliveryprogrammehollow sections

Table of contents

1

Application of hollow sections 2

Overview delivery programme hollow sections from stock 3

Characteristics of used international standards for hollow sections 4

Nearest equivalents in international standards for hollow sections 5

Relation between European standards and national / international standards 6

Important EN-standards for square/rectangular sections for steel constructions 7

Tolerances of cold formed hollow sections 8

Tolerances of hot formed hollow sections 10

LEDRU ® greenhouse heating tubes 11

Stanchions 12

Treatments, preservations and coatings 13

Inspection & quality control department 19

Delivery programme hollow sections; article groups and product descriptions 21

Delivery programme hollow sections; dimensions and weights 23

Nothing in this catalogue may be copied or reproduced without written permission of Van Leeuwen Buizen, Zwijndrecht, The Netherlands.

Table of contents

Application of structural steel hollow sections

2

Deliveryprogrammehollow sections

Application ofhollow sections

Innumerable possibilities of steel hollow sectionsSquare, rectangular and circular hollow sections have become increasingly important as construction material in comparison to steel beams andopen sections. The technical features of structural steel hollow sections make the most complicated constructions possible. Also, the size of projects form no limit to the application of steel hollow sections. Think for example about the huge oil rigs that stand on steel tubular constructions in full sea.

Besides their technical advantages, hollow sections are also increasingly used because of their esthetical characteristics. Hollow sections are usedas visible construction elements in structural steel projects, contributing highly to the artistical impact of the design.

This edition focuses on the square and rectangular hollow sections. The vast range of dimensions offers a broad variety of application possibilities, both in technical as well as in esthetical aspect. For more information about circular hollow sections, we refer to our separate deliveryprogramme edition that is also available.

Some examples for the application of steel hollow sections are:

Steel constructionsFactory buildings, bridges, football stations, light poles, trade fair buildings, kiosks, greenhouses, escape stairs, railway stations, multi-storey carparks etc.

ArchitectureFree columns, pavillions, art works, railway station roofs, glazing supports etc.

Automotive industryTruck chassis, bus frames, lorries, caravans, train and metro parts, tank cars etc.

Machine buildingFrames for machines, motor blocks, reservoirs etc., agricultural machines.

TransportCrane building industry, lifting arms for off-road trucks, bulldozers, frames for conveyor belts.

Furniture industryTable and chair frames, hospital beds.

❑ Welded hollow sections DIN 2395 (1/2)-B, material S235JRG2 to EN 10025

❑ Welded hollow sections DIN 2395 (1/2)-B, material S275J0 to EN 10025

❑ Stanchions DIN 2395 (1/2)-B, material S235JRG2 to EN 10025

❑ Welded hollow sections EN 10219, material S275J0H

❑ Welded hollow sections, flat-oval, material S235JRG2 to EN 10025

❑ Stanchions EN 10219, material S275J0H

❑ Ledru ®, teardrop hollow sections, material S185 to EN 10025

❑ Hollow sections EN 10210-1, dimensions and tolerances to EN 10210-2 material S275J2H

❑ Hollow sections EN 10210-1, dimensions and tolerances to EN 10210-2 material S355J2H

❑ Welded hollow sections to DIN 2395 (1/2)-A, material Fe P01 to EN 10130

❑ Welded hollow sections to DIN 2395 (1/2)-A, material S185 to EN 10025

❑ Welded hollow sections, flat-oval, material Fe P01 to EN 10130

❑ Welded hollow sections, flat-oval, material S185 to EN 10025

❑ Welded hollow sections to EN 10219-1/2, material S355J2H

In most cases these tubes can be supplied upon request in various coated executions.Upon request tubes to any other standard or materialgrade can be offered.

Overview delivery programme hollow sections from stock

3


Overview deliveryprogramma hollowsections from stock

Characteristics of used international standards for hollow sections:

DIN 2395 Page 1German standard for welded carbon steel hollow sections with square or rectangular diameter for general purposes.

DIN 2395 Page 2German standard with technical delivery conditions, going with DIN 2395 Page 1.

EN 10025European standard with qualities of hot rolled carbon steel strip or construction steel.

EN 10130European standard with qualities of cold rolled carbon steel strip or construction steel.

EN 10210 part 1European standard for technical delivery conditions for hot formed or annealed hollow sections from construction steel

EN 10210 part 2European standard for dimensions, tolerances and static values of hot formed carbon steel hollow sections with square,

rectangular or circular diameter for application in steel constructions mainly.

EN 10219 part 1European standard with technical delivery conditions for cold-formed carbon steel hollow sections for application in steel constructions mainly.

EN 10219 part 2European standard for dimensions, tolerances and static values for cold-formed carbon steel hollow sections with square,

rectangular or circular diameter for application in steel constructions.

Characteristics of used standards

4


Characteristics ofused standards

Country Cold formed Hot formed

Welded hollow sections Welded hollow Hollow sections

for general purposes sections for steel for steel

constructions constructions

Standard for dimen- Standard for dimen- Material Standard for dimen- Material

sions & tolerances sions & tolerances standard sions & tolerances standard

Netherlands DIN 2395 EN 10219-2 EN 10219-1 EN 10210-2 EN 10210-1

page 1 and 2

Germany DIN 2395 DIN 59411* DIN 17100* DIN 59410* DIN 17100*

page 1 and 2 (DIN 17119)

France NF A 49-645 NF A 49-541* NF A 49-501* NF A 49-501*

NF A 49-643

England –– BS 6363* BS 4848 p.2* BS 4360*

Europe –– EN 10219-2 EN 10219-1 EN 10210-2 EN 10210-1

* These national standards are officialy rejected and replaced by the European standards.

Nearest equivalent standards in tube materials for hollow sections*

DIN 17100 Euronorm ISO 630 BS 4360 NF A 49-501 EN 10210-1EN 10025 EN 10219-1

(1980) (1993) (1980) (1990) (1986) (1997)

quality

St 33 S185 (1.0035) Fe 310 –– –– ––

USt 37.2 S235 JRG1 (1.0036) Fe 360 B 40 B E 235-1

RSt 37.2 S235 JRG2 (1.0038) Fe 360 B 40 B E 235-2 S235 JRH

St 37.3 S235 J0 (1.0114) Fe 360 C 40 C E 235-3

St 37.3N S235 J2G3 (1.0116) Fe 360 D 40 D E 235-4

St 44.2 S275 JR (1.0044) Fe 430 B 43 B E 275-2

St 44.3 S275 J0 (1.0143) Fe 430 C 43 C E 275-3 S275 J0H

St 44.3N S275 J2G3 (1.0144) Fe 430 D 43 D E 275-4 S275 J2H

St 52.3 S355 J0 (1.0553) Fe 510 C 50 C E 355-3 S355 J0H

St 52.3N S355J2G3 (1.0570) Fe 510 D 50 D E 355-4 S355 J2H

* N.B. The new European standards EN 10210/1-2 and EN 10219/1-2 are valid by now. These are standards for respectively hot and cold-formed hollow

sections for steel constructions. The standards contain material denominations as a result of which reference to plate standards such as EN 10025 are no

longer necessary.

Nearest equivalents in international standards for hollow sections

5


Nearest equivalentsin international standards forhollow sections

Relation between European standardsand national & international standards

6


Relation betweenEuropean, national& internationalstandards

Description EUROPE EUROPE Netherlands Germany UK France Intern. USAEN (new) EU (old) NEN (old) DIN BS NF ISO ASTM/API

ANSI

Structural steel 10025 25-72 EU 25 17100 4360 A35-501 630 A36/A633Steel for pressure 10028-2 28-85 EU 28 17155 1501-1 A36-205-2 ------- A285purposes el. temp. A515Steel for pressure 10028-3 28-85 EU 28 17102 4360 A36-205-3 ------- A572purposes fine grain A516Charpy impact test 10045-1 7-55 EU 7 50115 131-2/3 A03-011 148 A370

45-63 EU 45 E23Structural steel 10113-1 113-72 EU 113 17102 4360 A35-505 4996 A573fine grain 10113-2 A36-201Cold rolled strip 10130 130-77 EU 130 1623 1449-1.3 A36-401 3574 A366techn. del. cond. A619Cold rolled strip 10131 131-77 EU 131 1541 1449-1.7 A46.402 3574 A568tolerancesStructural steel 10155 155-80 EU 155 SEW087 4360 A35-502 5952 A588with atm. corrosion 4952resistanceTypes of inspection 10204 21-78 EU 21 50049 EN10204 A00-001 10474 -------documentsSteel pipes for pipe 10208-2 ------- 3650 17172 8010-2.8 A49-401 3183 API-5Llines for comb. A49-402fluids class B A49-411Hot finished 10210-1 ------- ------- 17100 4360 A49-501 630 A501structural hollow 17120sections 17121techn. del. cond. 17123

1712417125

Hot finished 10210-2 ------- ------- 59410 4848-2 A49-501 657-14 A501structural hollow 17120sections; tolerances 17121and dimensions 17123

17124Seamless tubes for 10216-1 ------- ------- 1629 3601 A49-112 2604-2 A53pressure purposesWelded tubes for 10217-1 ------- ------- 1626 3601 A49-141 2604-3 A53pressure purposes A49-142Cold formed 10219-1 ------- ------- 17100 4360 A49-541 ------- A500structural hollow 17119 6363sections, tolerances 17120techn. del. cond. 17123

17125Cold formed 10219-2 ------- ------- 59411 6363 A49-541 4019 A500structural hollow 17120sections, tolerances 17123and dimensions 17125Seamless and 10220 ------- 2448 1600 ------- 4200 B36.10welded pipes, dim. 2458 3600and weightThreaded fittings in 10242 ------- 2950 143/1256 E29-801 49 A338malleable cast iron

Important EN-standards for square/rectangular hollow sections for steelconstructions

7


Important EN-standards forsquare/rectangularhollow sections forsteel constructions

EN 10210 Hot formed hollow sections for steel construction purposesEN 10219 Cold formed welded hollow sections for steel construction purposes

Standard Description of standard Former denominations

EN 10210-1 Technical delivery conditions DIN 17121, DIN 17100BS 4360, NFA-49501

EN 10210-2 Tolerances, dimensions and characteristics DIN 59410, BS 4848NFA-49501

EN 10219-1 Technical delivery conditions DIN 17120, DIN 17119, BS 6363, NFA 49541

EN 10219-2 Tolerances, dimensions and characteristics DIN 59411, BS 6363,NFA 49541

Standard Material denominations Former denominations

S235JRH RSt.37.2 (Fe 360 B)EN 10210 S275JOH St.44.3 (Fe 430 C)and S355JOH St.52.3 (Fe 510 C)EN 10219 S355J2H St.52.3N (Fe 510 D)

Above mentioned material denominations are in accordance with EN 10027 and have been included in the standards EN 10210 and EN 10219. Below an example of a relevant material denomination:

S275J2H:S construction steel275 minimum yield point in N/mm2

J impact value minimum 27 Joules2 impact test temperature –20º C.H hollow section

EN 10025For those hollow sections, for which a Euronorm has not yet been defined, for instance DIN 2395/1 and 2, the material standard EN 10025 is applicable.

Standard Material denominations Former denominations according to EN 10025 according to DIN en EU

(bijv.) S235JRG2 RSt. 37.2 (Fe360 BFN)DIN 2395 S235J2G3 St .37.3N (Fe360D1)

S355J2G3 St.52.3N (Fe510 D)

S235J2G3:S construction steel235 minimum yield point in N/mm2

J impact value minimum 27 Joules2 impact test temperature –20º C.G3 annealed or normalised rolled material

Tolerances of cold formed hollow sections

8


Tolerances of cold formedhollow sections

Tolerances of cold formed hollow sections to DIN 2395 (1/2) and EN 10219-2

Standard: DIN 2395 (1 / 2) EN 10219 part 2

Denomination of height, width and wallthickness:

Tolerance on see table 1 see table 2height / width:

Tolerance on T +/- 10% T ≤ 5 mm +/- 10%wallthickness: with a minimum of +/-0,35mm T > 5 mm +/- 0,5 mm

Corner shape / corner radius (a) Wallthickness T C1, C2 of Routside > ≤a, C1, C2, or R: T ≤ 2,5 mm a ≈ 1,0.T - 6 2,0.T

T > 2,5 mm a ≈ 2,0.T 6 10 2,5.T10000000 3,0.T

Tolerance +/- 20%

Tolerance on vaulting: Max. 0,8% with a minimum of 0,5 mm

Tolerance onright angle(square angle):

90º +/- 1º 90º +/- 1º

Tolerance oncontortion(on torsion):

max. 1º/m max. 2 mm (+ 0,5 mm/m)

Standard: DIN 2395 (page 1 and 2) EN 10219 part 2

Tolerance on straightness:

max. 0,0025.L* max. 0,0015.L* For hot dipped galvanised or normalised annealed tubes max. 0,005.L

Tolerance on mass: +/- 6% for individual lenghts

Tolerance on dimensions (height and width)

Table 1DIN 2395 / Page 1 height / width in mm tolerance in mm

largest side ≤ 20 +/- 0,2020< largest side ≤ 36 +/- 0,2536< largest side ≤ 50 +/- 0,3050< largest side ≤ 60 +/- 0,4060< largest side ≤ 70 +/- 0,5070< largest side ≤ 80 +/- 0,6080< largest side ≤ 90 +/- 0,7590< largest side ≤ 120 +/- 0,80

For the determination of tolerance for rectangular hollow sections the largest side is determining.

Table 2EN 10219 Part 2 height / width (H / W) in mm tolerance in mm

H / W < 100 +/- 1% with a minimum of 0,5 mm100 ≤ H / W ≤ 200 +/- 0,8 %H / W > 200 +/- 0,6 %

9


Tolerances of cold formedhollow sections

Tolerances of hot formed hollow sections

10


Tolerances ofhot formedhollow sections

Tolerances of hot-formed hollow sections to EN 10210 part 2

Denomination of height, width, wall thicknessand radius:

Tolerance on +/- 1% with a minimum of +/- 0,5 mmheight / width:

Tolerance on -10% and as per tolerance on masswallthickness:

Corner shape Max. 3 x ToutsideC1, C2, or R:

Tolerance on vaulting: Max. 1 %

Tolerance on 90º +/- 1º right angle(square angle):

Tolerance on V max. 2 mm contortion + 0,5 mm /m (torsion):

Tolerance on f max = 0,002 L straightness:

Tolerance on mass: +/- 6% on individual lengths

LEDRU ® teardrop greenhouse heating tubes

Dimensions 51/26,9 x2,25 mm

LEDRU ®, teardrop hollow sections, cold formed, material S185 to EN 10025-1993 (Fe310/St33), manufactured from unpickled hot rolled strip,leak tested, in lengths of approx. 7 m. if desired with mill testcertificate to EN 10204/2.2

Heat technical advantages of teardrop hollow sections� 60% less water compared with traditional greenhouse heating tube diam. 51 mm� Reduction of approx. 12.500 ltr water per hectare� Better temperature control and quicker reaction speed

Mechanical advantages teardrop hollow sections� Strong in vertical direction and therefore a more stable mono or tube railsystem� Easy weldable

type of hollow dimensions delivery weight of water- weight of tube suitable forsection pipe volume incl. water

greenhouse tube 51 x 2,25mm 100 % 2,7 kg/m 1,7 ltr/m 4,4 kg/m tube rail / pick railØ51teardrop hollow 51X26,9X2,25 100 % 2,7 kg/m 0,7 ltr/m 3,4 kg/m tube rail / section LEDRU® (height 68mm) monorail

Deliverable in the following executions:� black� electrolytic zinc plated� powder coated� shotblasted and primed

Hollow sections in special shapes

11


Hollow sectionsin special shapes

combination A combination B

Deliverable in the following executions:

Stanchions / hollow sections according to DIN 2395 (1/2)-B, material S235JRG2 as per EN 10025-1993 (Fe 360-BFN/RSt 37.2), cold-formed,

manufactured from unpickled hot rolled strip. If desired with mill testcertificate to EN 10204/2.2, in lengths as indicated.

Stanchions as per EN 10219, material S275J0H (Fe 430 C/St 44.3), cold formed, manufactured from unpickled hot rolled strip.

If desired with mill testcertificate to EN 10204/2.2, in lengths as indicated per size.

Deliverable in the following dimensions:

Art.nr. D1 D2 s Theor. Standard Relevant standard Material/ VL-weight lengths in and denomination grade code

size in mm in kg/m stock (m)

8023 60 x 30 x 3 3,800 7,50 Stanch DIN 2395/B - EN 10025 S235JRG2 530

8349 70 x 40 x 4 6,140 7,50 Stanch / EN 10219 S275J0H 530

8873 81 x 51 x 5 8,900 7,50 Stanch / EN 10219 S275J0H 530

8910 83 x 53 x 6 10,650 7,50 Stanch / EN 10219 S275J0H 531

9129 96 x 66 x 6 13,040 7,50 Stanch / EN 10219 S275J0H 531

12


Hollow sectionsin special shapes

60 x 30 x 3 mmfits in 70 x 40 x 4 mmfits in 81 x 51 x 5 mmfits in 96 x 66 x 6 mm

60 x 30 x 3 mmfits in 70 x 40 x 4 mmfits in 83 x 53 x 6 mm

Stanchions

13


Treatments, preservations andcoatings

Van Leeuwen Pipe & Tube can carry out following treatments in house:

• cutting into fix lengths• shotblasting and/or priming• marking• packing• plastic caps• inspection, testing and stamping.

Moreover, Van Leeuwen Pipe & Tube can take care of various other treatments such as:

• outside shotblasting and coating with various primers• chemical cleaning• hot dipped galvanising or electrolytic zinc plating• outside polyethylene coating• inside cement lining• annealing.

Upon request many other, here not mentioned treatments, can be carried out as well.

Treatments, preservations and coatings

14



Cutting into fix lengths

We can cut pipes and tubes into fix lengths within the following range:• maximum outside diameter of 813 mm• maximum wall thickness of 50 mm• minimum length of 50 mm• maximum length of 14 meter

For outside diameters > 813 mm fix lengths are made possible by oxygen cutting:• minimum length 150 mm• minimum wall thickness 32 mm• maximum wall thickness 150 mm

Hollow sections can also be cut into fix lengths up to the maximum sizes 500 x 300 mm.

Tolerances:

For cutting into fix lengths (or oxygen cutting) we offer the following possibilities:

Standard cutting:

Diameter Hollow sections Length In mm Tolerance10 - 813 mm 10 - 500 mm 50 - 10000 -0/+ 5 mm10 - 813 mm 10 - 500 mm 10000 - 14000 -0/+10 mm

Cutting with closer tolerances:

Diameter Hollow sections Length in mm Tolerance10 - 220 mm 10 - 160 mm 50 - 6000 -0/+ 2 mm

220 - 410 mm 160 - 300 mm 50 - 4000 -0/+ 2 mm

Oxygen cutting with closer tolerances:

Diameter Hollow sections Length in mm Tolerance813 -1300 mm – – 150 - 14000 -0/+15 mm

Cutting into two pieces (≥ 813 mm oxygen cutting):

Diameter Hollow sections Length in mm Tolerance10 -1300 mm 10 -500 mm Approx. half of the >200 mm

orig. standard length

15



Shotblasting and/or preserving pipe, tube and hollow sections:

Pipe & tube up to a maximum outside diameter of 508 mm and with a maximum length of 14 meter, can be blasted and/or preserved for you inour own preservation lines. We can offer following possibilities:

• Outside shotblasting SA 2,5 (Swedish standard SIS 05 59 00 –1967)• Outside shotblasting SA 2,5 and painting with a red/brown Aqua welding primer, layer thickness approx. 25 µ (EPC 7205)*• Painting only with a layer of approx. 25 µ red/brown Aqua welding primer (EPC 7205)*

For pipe & tube with a larger outside diameter or in longer lengths we can arrange a wide variety of coatings in close co-operation with variouscoating companies. (please see also below)

Hollow sections up to a maximum outside diameter of 500 x 300 mm and up to a maximum length of 14 m can also be shotblasted and/or preserved by us in above mentioned varieties.

In a close co-operation with our sub suppliers we can also arrange treatments on a short notice for pipe & tube in larger diameters, up to a maximum o.d. of 1500 mm and for hollow sections (also within limits):

• Outside shotblasting SA 2,5 (Swedish standard SIS 05 59 00 –1967) and welding primer red-brown, layer 25-30 µ• Outside shotblasting SA 2,5 and powder coating, layer 25-30 µ

Pipe components

It is also possible to arrange shotblasting and priming of pipe components. Moreover there are possibilities for combinations such as in- and outs-ide shotblasting fittings or full shotblasting of flanges, followed by an MPE-investigation. Treatments, which are often asked for, are:

• Outside shotblasting SA 2,5 (Swedish standard SIS 05 59 00 –1967)• In- and outside shotblasting SA 2,5• Outside shotblasting SA 2,5 and coating with alkyd welding primer 25-30 µ• Outside shotblasting SA 2,5 and coating with shopprimer 20-25 µ• Outside shotblasting SA 2,5 and coating with zinc silicate shopprimer 20-25 µ• Outside shotblasting SA 2,5 and coating with transparent pipe varnish• Full shotblasting of flanges SA 2,5• Outside shotblasting SA 2,5 and 20-25 µ powder coating

(possibly in combination with MPE investigation)

* A fast drying primer based on water borne resins.

16



Chemical cleaning of pipe and pipe components

Apart from shotblasting, pipe and pipe components can also be cleaned chemically. Depending on the intensity of pollution and desired coating,the total treatment can be more or less extensive. Maximum length for pipe & tube is 14 meter.

For this method of cleaning we strongly advise to protect pipe and pipe component immediately afterwards by a thin layer of oil, unless anothercoating is applied after cleaning. Internal pollution can be avoided by protecting ends with plastic caps.

We can arrange following treatments:

• Degreasing• Pickling, washing and phosphating• Pickling, washing, phosphating and plastic caps• Degreasing, pickling, washing and phosphating• Degreasing, pickling, washing, phosphating and plastic caps.• Pickling, washing, phosphating and in- or outside oiling• Pickling, washing, phosphating, in- or outside oiling and caps• Degreasing, pickling, washing, phosphating, in- and outside oiling• Degreasing, pickling, washing, phosphating, in- and outside oiling and plastic caps

Possible additional treatment:

1 layer of Alkyd welding primer 25 - 30 µ, red/brown

Explanation of above applied terminology:

Degreasing: Before pickling, polluted elements such as oil, grease and coatings are removed

Pickling: Removal of oxide layers, anneal and other corrosion products

Phosphating: Treatment with a hot phosphorus solvent to avoid rust (temporarily)

Oiling: In- and / or outside oiling (up to max.12 meter) with Shell Ensys oil E

17



Other treatments:

Hot dipped galvanising (in- and outside)• Hot dipped galvanising in accordance with NEN EN 1461* or ASTM A-123

* NEN EN 1461 has replaced the cancelled standard NEN 1275

• Minimum length 6 meter (maximum length to be discussed)• Minimum diameter 17 mm**

** For diameters smaller than 17 mm there are possibilities upon request. Hot dipped galvanising will then be carried out in accordance with DIN 2444.

Electrolytic zinc plating (outside only)• Standard blue passivied• Yellow passivied is optional• Layer: 8-12 µ• Lengths: 5-7 meter.• Standard packing: in folio

PE-coating of pipe• Polyethylene coating in accordance with NEN 6901/6902 + KIWA, respectively DIN 30670/N-n, standard thickness

of layer with an epoxy base layer (= 3-layers of coating), as per hose extrusion process.• Colour: standard colour is yellow (black is optional)• Layer: ≤ 4" minimum 1,8 mm, > 4" minimum 2 mm

If desired with KIWA inspection (for deliveries in the Netherlands)

Moreover there are possibilities for:• Polyethylene coating as per sintermethod• Outside polyethylene coating and inside cementlining

Annealing pipe and tubeWe can offer you following possibilities:• GBK annealing at approx. 720 °C• NBK annealing at approx. 930 °C *

The tubes are lightly oiled after annealing, unless explicitly agreed upon.(not oiled means a great risk for rust)

* NBK annealed pipes and tubes are straightened afterwards.

18



Mechanical treatments:

We can take care of various mechanical treatments:

• Machining of gasket faces of RF flanges to "flat face" with a "finish" of Ra = 3,2–12,5 micrometer (=125 – 500 microinch AARH) to ASME/ANSI B 16.5a and B 46.1–1985.

• Machining of gasket faces of flanges to a "finish" of Ra = 4,0 - 6,3 micrometer (= 160 - 250 microinch AARH) as per ANSI/ASME B 46.1 – 1985.

• Machining of gasket faces of flanges to "smooth finish" of Ra = 3,2 - 6,3 micrometer (= 125 – 250 microinch AARH) according to Shell specification 76/001. Machining with a toolradius of 0,8 mm / 0,35 - 0,45 mm.

• Mechanical treatment of only partially machined ASME / ANSI flanges, such as:Internal machining the entire height according to ASME/ANSI B16.5-1988 and B16.5a- 1992 up to a specified schedule. Root face machined in accordance with ASME/ANSI B16.5-1988 fig. 8. Gasket face to be treated to the desired finish according to ASME/ANSI B 16.5-1988 table 5.

• Internal machining flanges on the entire height in accordance with ASME/ANSI B 16.5 – 1988 and machining the bevelling/ root face according to ASME/ANSI B 16.5 – 1988 fig. 8

• Machining DIN welding neck flanges with extra strong S-size viz.:Internal drilling of the entire height up to a specified wall thickness; machining the gasket face to a finish of Ra = 3,2 - 6,3 micrometer (= 125-250 microinch AARH); and machining root face according to DIN 2559 part 1 05-1973 form 22.

• Machining DIN-welding neck flanges with extra strong S-size viz.:Internal drilling of the entire height up to a specified wall thickness; machining of root face as per DIN 2559 part1 05-1973 form 22

Apart from the above-mentioned treatments we can carry out various other mechanical treatments.

19


Inspection & quality control

Our inspection and quality control department can carry out following inspections:

Destructive inspections• Under supervision of Lloyd’s or other external independent inspection bodies it is possible to carry out additional 3.1C

inspection on pipe and pipe components

Moreover, various additional inspections can be carried out, such as:• Transverse or longitudinal tensile test• Flattening test• Hot yield test• Impact test at various desired temperatures• Various bending tests• Spectral analysis• Material exchange investigation• Hardness test

Non destructive inspections• Ultrasonic test• MPE inspection• Re-stamping• Inspection

We can also take care of the marking and packing of our products:

MarkingUpon request we can carry out various types of marking:• Marking pipe with signs and paint stripes• Labelling pipe components and valves• Paintmarking pipe components

Various types of packing• Plastic folio• Wooden beams under bundle• Plastic folio & wooden beams under bundle• Straw under bundle• Plastic folio & straw under bundle• Wooden case• Crate• U-shapes• Box on pallet• Degreasing valves (by dipping) , followed by drying and packing

Plastic caps for• Pipe• Pipe components

Inspection & quality control

21


Productdescriptionshollow sections

530 DIN 2395 (1/2)-B / S235JRG2 Welded steel precision tubes to DIN 2395 (1/2)-B, material S235JRG2 to EN 10025 –1993,

EN 10025 cold formed, manufactured from unpickled hot rolled strip. In lengths as indicated per

item. If desired with mill inspection report as per EN 10204/2.2.

530 DIN 2395 (1/2)-B / S275J0 Welded steel precision tubes to DIN 2395 (1/2)-B, material S275J0 to EN 10025-1993,

EN 10025 cold formed, manufactured from unpickled hot rolled strip. In lengths as indicated per

item. If desired with mill inspection report as per EN 10204/2.2.

530 Stanch / S235JRG2 Carbon steel stanchions to DIN 2395 (1/2)-B, material S235JRG2 as per EN 10025-1993,

DIN 2395(1/2)-B cold formed, manufactured form unpickled hot rolled strip. In lengths as indicated per

EN 10025 item. If desired with mill inspection report as per EN 10204/2.2.

530/531 EN 10219 S275J0H Cold-formed hollow sections as per EN 10219, material S275J0H, manufactured from

unpickled hot rolled strip. In lengths as indicated per item. If desired with mill inspection

report EN 10204/2.2.

530/531 FO / EN 10025 S235JRG2 Welded hollow sections, flat-oval, cold formed, material S235 to EN 10025-1993,

manufactured from unpickled hot rolled strip, in lengths as indicated per item.

530/531 Stanch / S275J0H Carbon steel stanchions to EN 10219, material S275J0H, cold formed, manufactured

EN 10219 from unpickled hot rolled strip. In lengths as indicated per item. If desired with mill

inspection report as per EN 10204/2.2.

530/531 LEDRU ® / S185 LEDRU ®, teardrop hollow sections, cold formed, material S185 to EN 10025-1993,

EN 10025 manufactured from unpickled hot rolled strip, leak tested, in lengths of approx. 7 m.

532 EN 10210 - 1/2 S275J2H Hot formed hollow sections in accordance with EN 10210 part 1, dimensions and

tolerances as per EN 10210 part 2, material S275J2H. In lengths as indicated per item.

If desired with inspection report as per EN 10204/3.1B

532 EN 10210 – 1/2 S355J2H Hot formed hollow sections in accordance with EN 10210 part 1, dimensions and

tolerances as per EN 10210 part 2, material S355J2H. In lengths as indicated per item.

If desired with inspection report as per EN 10204/3.1B

540 DIN 2395 (1/2)-A / Fe P01 KB Welded carbon steel precision tubes to DIN 2395 (1/2)-A, material Fe P01 as per

EN 10130 EN 10130-1992, cold formed, manufactured from cold rolled strip, in lengths as

indicated per item.

Product descriptions hollow sections

VL codes 530, 531, 532, 540 and 541

VL Standard Material / Product descriptioncode Grade

22


Productdescriptionshollow sections

540 DIN 2395 (1/2)-A / S185 GWB Welded precision tubes to DIN 2395 (1/2)-A, material S185 to EN 10025-1993, cold

EN 10025 formed, manufactured from pickled hot rolled strip (bright) in lengths as indicated per

item.

540 FO / EN 10130 Fe P01 KB Welded hollow sections flat-oval, cold formed, material Fe P01 to EN 10130-1992,

manufactured from cold rolled strip in lengths as indicated per item.

540 FO / EN 10025 S185 GWB Welded hollow sections flat-oval cold formed, material S185 to EN 10025-1993,

manufactured from pickled hot rolled strip (bright) in lengths as indicated per item.

541 EN 10219-1/2 S355J2H Welded hollow sections as per EN 10219-1/2, cold formed, material S355J2H, In lengths

as indicated per item. If desired with inspection report as per EN 10204/3.1B

Upon request hollow sections to other standards or material grades can be offered to you.In most cases these hollow sections can also be supplied in various coated executions.

VL Standard Material / Product descriptioncode Grade

23

Delivery programme hollow sections

* for an product description of hollow sections see page 21 and 22

10 x 10 x 1

30 x 30 x 1,25��

580 10 10 1 0,281 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

581 10 10 1,25 0,341 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

2060 12 12 1,5 0,491 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

2725 15 15 1 0,438 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

2726 15 15 1,25 0,537 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

2727 15 15 1,5 0,632 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

2728 15 15 2 0,810 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

3351 18 18 1,5 0,773 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

3997 20 10 1 0,438 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

3998 20 10 1,25 0,537 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

3999 20 10 1,5 0,632 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4012 20 15 1,5 0,750 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4013 20 15 2 0,967 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4028 20 20 1 0,595 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

4029 20 20 1,25 0,733 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

4030 20 20 1,5 0,868 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

39023 20 20 1,5 0,868 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

4031 20 20 1,5 0,868 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

39025 20 20 2 1,120 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

4032 20 20 2 1,120 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4461 22 22 1,5 0,962 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4821 25 10 1,5 0,750 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4825 25 15 1,5 0,868 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4826 25 15 2 1,120 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4833 25 20 1,5 0,985 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4834 25 20 2 1,280 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4836 25 25 1 0,752 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

4837 25 25 1,25 0,930 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

39027 25 25 1,5 1,100 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

4838 25 25 1,5 1,100 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

39029 25 25 2 1,440 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

4840 25 25 2 1,440 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

39030 25 25 2,5 1,770 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

4841 25 25 2,5 1,770 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

4842 25 25 3 1,920 6 DIN 2395 (1/2)-B / EN 10025 S275J0 530

4843 25 25 3 1,920 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

5579 30 10 1,5 0,868 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

5580 30 10 2 1,120 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

5582 30 15 1,5 0,985 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

5583 30 15 2 1,280 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

39031 30 20 1,5 1,100 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

5585 30 20 1,5 1,100 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

39032 30 20 2 1,440 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

5586 30 20 2 1,440 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

5588 30 20 3 1,920 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

5592 30 30 1,25 1,130 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

D = Outside diam.

s = Wallthickness

Dimensions and weights


D1 D2 s Theor. Standard VL*

Art.nr. weight lengths in Standard Material/ code

dimensions in mm in kg/m stock (m) grade

5593 30 30 1,5 1,340 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

5594 30 30 1,5 1,340 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

5595 30 30 2 1,750 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

5596 30 30 2 1,750 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

5597 30 30 2,5 2,150 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

5598 30 30 3 2,390 6 DIN 2395 (1/2)-B / EN 10025 S275J0 530

5600 30 30 4 3,000 6 DIN 2395 (1/2)-B / EN 10025 S275J0 530

5639 31 16 1,25 0,749 6 PO / EN 10130 Fe P01 KB 540

5640 31 16 1,5 0,889 6 PO / EN 10025 S185 GWB 540

5689 32 32 2 1,880 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6229 35 15 2 1,440 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6232 35 20 1,5 1,220 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6233 35 20 2 1,590 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6236 35 25 1,5 1,340 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6238 35 25 2 1,750 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6241 35 35 1,5 1,570 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6242 35 35 1,5 1,570 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6243 35 35 2 2,070 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6244 35 35 2 2,070 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6245 35 35 3 2,860 6 DIN 2395 (1/2)-B / EN 10025 S275J0 530

6248 35 35 4 3,620 6 DIN 2395 (1/2)-B / EN 10025 S275J0 530

6427 38 20 1,25 0,934 6 PO / EN 10130 Fe P01 KB 540

6428 38 20 1,5 1,110 6 PO / EN 10025 S185 GWB 540

6429 38 20 2 1,450 6 PO / EN 10025 S185 GWB 540

6824 40 10 1,5 1,100 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6825 40 15 1,5 1,220 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6826 40 15 2 1,590 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6828 40 20 1,25 1,130 6 DIN 2395 (1/2)-A / EN 10130 Fe P01 KB 540

6830 40 20 1,5 1,340 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6831 40 20 1,5 1,340 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6832 40 20 2 1,750 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6833 40 20 2 1,750 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6834 40 20 2,5 2,150 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6835 40 20 3 2,390 6 DIN 2395 (1/2)-B / EN 10025 S275J0 530

6837 40 25 1,5 1,460 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6838 40 25 2 1,910 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6839 40 25 2 1,910 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6840 40 30 1,5 1,570 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6841 40 30 2 2,070 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6842 40 30 2 2,070 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6843 40 30 3 2,860 6 DIN 2395 (1/2)-B / EN 10025 S275J0 530

6844 40 30 4 3,620 6 EN 10219 S275J0H 530

6845 40 40 1,5 1,810 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6847 40 40 2 2,380 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

6848 40 40 2 2,380 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6849 40 40 2,5 2,930 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530




D = Outside diam.

s = Wallthickness

24

30 x 30 x 1,5

40 x 40 x 2,5��




D = Outside diam.

s = Wallthickness


25* for an product description of hollow sections see page 21 and 22

40 x 40 x 2,9

50 x 30 x 4��

6852 40 40 2,9 3,310 12-13,5 EN 10210-1/2 S355J2H 532

6853 40 40 3 3,330 6 EN 10219 S275J0H 530

6854 40 40 3 3,330 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

6855 40 40 3 3,330 12 EN 10219 S275J0H 530

6863 40 40 4 4,390 12-13,5 EN 10210-1/2 S355J2H 532

6859 40 40 4 4,250 6 EN 10219 S275J0H 530

6860 40 40 4 4,250 12 EN 10219 S275J0H 530

6865 40 40 5 5,280 12-13,5 EN 10210-1/2 S355J2H 532

7091 45 25 2 2,070 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7092 45 45 1,5 2,050 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7093 45 45 2 2,690 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7094 45 45 2 2,690 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7095 45 45 2,5 3,330 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7096 45 45 3 3,800 6 EN 10219 S275J0H 530

7097 45 45 4 4,880 6 EN 10219 S275J0H 530

7178 48 20 1,5 1,340 6 PO / EN 10025 S235JRG2 530

7179 48 20 2 1,770 6 PO / EN 10025 S235JRG2 530

7383 50 20 1,5 1,570 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7384 50 20 1,5 1,570 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7385 50 20 1,5 1,570 6,35 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7386 50 20 2 2,070 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7387 50 20 2 2,070 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

39638 50 20 2 2,070 7,95 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

53621 50 20 2 2,070 7,95 DIN 2395 (1/2)-B / EN 10025 S275J0 530

7388 50 25 1,5 1,690 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7389 50 25 1,5 1,690 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7390 50 25 1,5 1,690 6,35 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7391 50 25 1,75 1,960 7,95 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7392 50 25 2 2,220 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7393 50 25 2 2,220 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

31052 50 25 2 2,220 7,95 DIN 2395 (1/2)-B / EN 10025 S275J0 530

7396 50 25 3 3,100 6 DIN 2395 (1/2)-B / EN 10025 S275J0 530

7399 50 30 1,5 1,810 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7400 50 30 1,5 1,810 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7401 50 30 1,5 1,810 6,35 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7402 50 30 2 2,380 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7403 50 30 2 2,380 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

53622 50 30 2 2,380 6,40 DIN 2395 (1/2)-B / EN 10025 S275J0 530

53623 50 30 2 2,380 9,55 DIN 2395 (1/2)-B / EN 10025 S275J0 530

7406 50 30 2,5 2,930 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

53835 50 30 2,5 2,930 9,55 DIN 2395 (1/2)-B / EN 10025 S275J0 530

7409 50 30 2,9 3,310 12-13,5 EN 10210-1/2 S355J2H 532

7410 50 30 3 3,330 6 EN 10219 S275J0H 530

53834 50 30 3 3,330 9,55 EN 10219 S275J0H 530

7411 50 30 3 3,330 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7416 50 30 4 4,390 12-13,5 EN 10210-1/2 S355J2H 532





7415 50 30 4 4,250 6 EN 10219 S275J0H 530

7417 50 34 2 2,510 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7418 50 40 1,5 2,050 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7419 50 40 2 2,690 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7420 50 40 2 2,690 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7421 50 40 3 3,800 6 EN 10219 S275J0H 530

7422 50 40 4 4,880 6 EN 10219 S275J0H 530

7423 50 50 1,5 2,280 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7424 50 50 1,5 2,280 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7425 50 50 2 3,010 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7426 50 50 2 3,010 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7427 50 50 2 3,010 6,40 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7428 50 50 2,5 3,720 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

7437 50 50 2,9 4,220 12-13,5 EN 10210-1/2 S355J2H 532

7431 50 50 3 4,280 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

7432 50 50 3 4,280 6 EN 10219 S275J0H 530

7434 50 50 3 4,280 10 EN 10219 S275J0H 530

7433 50 50 3 4,280 12 EN 10219 S275J0H 530

7443 50 50 4 5,640 12-13,5 EN 10210-1/2 S355J2H 532

7439 50 50 4 5,510 6 EN 10219 S275J0H 530

7440 50 50 4 5,510 12 EN 10219 S275J0H 530

7445 50 50 5 6,850 12-13,5 EN 10210-1/2 S275J2H 532

7451 50 50 5 6,850 12-13,5 EN 10210-1/2 S355J2H 532

7447 50 50 5 6,380 6 EN 10219 S275J0H 530

55082 50 50 5 6,380 11,5 EN 10219 S275J0H 530

7448 50 50 5 6,380 12 EN 10219 S275J0H 530

39590 50 50 6,3 8,310 12-13,5 EN 10210-1/2 S355J2H 532

7555 51 26,9 2,25 2,710 7 LEDRU ® / EN 10025 S185 530

7592 55 34 2 2,660 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8009 60 20 1,5 1,810 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8010 60 20 2 2,380 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8011 60 20 2 2,380 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8012 60 30 1,5 2,050 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8013 60 30 1,5 1,760 6 PO / EN 10025 S185 GWB 540

8014 60 30 2 2,690 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8016 60 30 2 2,320 6 PO / EN 10025 S185 GWB 540

8015 60 30 2 2,690 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

53092 60 30 2 2,690 9,60 DIN 2395 (1/2)-B / EN 10025 S275J0 530

8018 60 30 2,5 3,330 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8020 60 30 3 3,800 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8019 60 30 3 3,800 6 EN 10219 S275J0H 530

8023 60 30 3 3,800 7,50 Rong DIN 2395/B - EN 10025 S235JRG2 530

36763 60 30 3 3,800 9,55 EN 10219 S275J0H 530

8024 60 30 4 4,880 6 EN 10219 S275J0H 530

8025 60 40 1,5 2,280 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8026 60 40 1,5 2,280 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540




D = Outside diam.

s = Wallthickness

26

50 x 30 x 4

60 x 40 x 1,5��




D = Outside diam.

s = Wallthickness



60 x 40 x 2

70 x 40 x 4��

8027 60 40 2 3,010 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8028 60 40 2 3,010 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8029 60 40 2,5 3,720 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8034 60 40 2,9 4,220 12-13,5 EN 10210-1/2 S355J2H 532

8031 60 40 3 4,280 6 EN 10219 S275J0H 530

8040 60 40 4 5,640 12-13,5 EN 10210-1/2 S355J2H 532

8036 60 40 4 5,510 6 EN 10219 S275J0H 530

8037 60 40 4 5,510 12 EN 10219 S275J0H 530

16219 60 40 5 6,850 12-13,5 EN 10210-1/2 S355J2H 532

8043 60 40 5 6,390 6 EN 10219 S275J0H 530

8044 60 50 2 3,320 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8045 60 50 3 4,750 6 EN 10219 S275J0H 530

8046 60 50 4 6,080 6 EN 10219 S275J0H 530

8047 60 60 2 3,640 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8048 60 60 2 3,640 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8049 60 60 2,5 4,500 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8056 60 60 2,9 5,130 12-13,5 EN 10210-1/2 S355J2H 532

8051 60 60 3 5,220 6 EN 10219 S275J0H 530

8053 60 60 3 5,220 10 EN 10219 S275J0H 530

8052 60 60 3 5,220 12 EN 10219 S275J0H 530

8057 60 60 3,5 6,000 6 EN 10219 S275J0H 530

8065 60 60 4 6,900 12-13,5 EN 10210-1/2 S355J2H 532

8060 60 60 4 6,760 6 EN 10219 S275J0H 530

8062 60 60 4 6,760 10 EN 10219 S275J0H 530

8061 60 60 4 6,760 12 EN 10219 S275J0H 530

8067 60 60 5 8,420 12-13,5 EN 10210-1/2 S275J2H 532

8072 60 60 5 8,420 12-13,5 EN 10210-1/2 S355J2H 532

8068 60 60 5 7,960 6 EN 10219 S275J0H 530

8069 60 60 5 7,960 12 EN 10219 S275J0H 530

8073 60 60 6 9,200 6 EN 10219 S275J0H 531

8074 60 60 6 9,200 12 EN 10219 S275J0H 531

8075 60 60 6,3 10,300 12-13,5 EN 10210-1/2 S275J2H 532

8077 60 60 6,3 10,300 12-13,5 EN 10210-1/2 S355J2H 532

39639 60 60 8 12,500 12-13,5 EN 10210-1/2 S355J2H 532

8318 70 20 2 2,690 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8328 70 30 2 3,010 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8329 70 30 2 3,010 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8330 70 30 3 4,280 6 EN 10219 S275J0H 530

8331 70 30 4 5,510 6 EN 10219 S275J0H 530

8340 70 40 2 3,320 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8343 70 40 3 4,750 6 EN 10219 S275J0H 530

8345 70 40 3 4,750 7,50 EN 10219 S275J0H 530

8344 70 40 3 4,750 12 EN 10219 S275J0H 530

8350 70 40 4 6,270 12-13,5 EN 10210-1/2 S355J2H 532

8347 70 40 4 6,140 6 EN 10219 S275J0H 530

8348 70 40 4 6,140 12 EN 10219 S275J0H 530





8349 70 40 4 6,140 7,50 Rong / EN 10219 S275J0H 530

8351 70 40 5 7,180 6 EN 10219 S275J0H 530

8356 70 50 2 3,640 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8357 70 50 3 5,220 6 EN 10219 S275J0H 530

8358 70 50 3 5,220 12 EN 10219 S275J0H 530

8359 70 50 4 6,760 6 EN 10219 S275J0H 530

8360 70 50 4 6,760 12 EN 10219 S275J0H 530

8363 70 70 2 4,260 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8364 70 70 3 6,160 6 EN 10219 S275J0H 530

8366 70 70 3 6,160 10 EN 10219 S275J0H 530

8365 70 70 3 6,160 12 EN 10219 S275J0H 530

8374 70 70 4 8,150 12-13,5 EN 10210-1/2 S355J2H 532

8371 70 70 4 8,020 6 EN 10219 S275J0H 530

8373 70 70 4 8,020 10 EN 10219 S275J0H 530

8372 70 70 4 8,020 12 EN 10219 S275J0H 530

8380 70 70 5 9,990 12-13,5 EN 10210-1/2 S355J2H 532

8377 70 70 5 9,520 6 EN 10219 S275J0H 530

8378 70 70 5 9,520 12 EN 10219 S275J0H 530

8381 70 70 6 11,090 6 EN 10219 S275J0H 531

8382 70 70 6 11,090 12 EN 10219 S275J0H 531

39640 70 70 6,3 12,300 12-13,5 EN 10210-1/2 S355J2H 532

8796 80 20 2 3,010 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8797 80 20 2 3,010 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8798 80 30 2 3,320 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8799 80 30 2 3,320 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8800 80 30 3 4,750 6 EN 10219 S275J0H 530

8801 80 40 2 3,640 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8802 80 40 2 3,640 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8803 80 40 2,5 4,500 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8809 80 40 2,9 5,130 12-13,5 EN 10210-1/2 S355J2H 532

8805 80 40 3 5,220 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

8806 80 40 3 5,220 6 EN 10219 S275J0H 530

8807 80 40 3 5,220 12 EN 10219 S275J0H 530

8814 80 40 4 6,900 12-13,5 EN 10210-1/2 S355J2H 532

8811 80 40 4 6,760 6 EN 10219 S275J0H 530

8812 80 40 4 6,760 12 EN 10219 S275J0H 530

8818 80 40 5 8,420 12-13,5 EN 10210-1/2 S355J2H 532

8816 80 40 5 7,960 6 EN 10219 S275J0H 530

8817 80 40 5 7,960 12 EN 10219 S275J0H 530

8819 80 40 6,3 10,300 12-13,5 EN 10210-1/2 S275J2H 532

16245 80 40 6,3 10,300 12-13,5 EN 10210-1/2 S355J2H 532

8820 80 50 2 3,950 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

53624 80 50 2 3,950 9,10 DIN 2395 (1/2)-B / EN 10025 S275J0 530

8822 80 50 2,5 4,900 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

31053 80 50 2,5 4,900 8,10 DIN 2395 (1/2)-B / EN 10025 S275J0 530

8824 80 50 3 5,690 6 EN 10219 S275J0H 530




D = Outside diam.

s = Wallthickness

28

70 x 40 x 4

80 x 50 x 3��




D = Outside diam.

s = Wallthickness



80 x 50 x 3

90 x 50 x 5��

8826 80 50 3 5,690 8,10 EN 10219 S275J0H 530

8825 80 50 3 5,690 12 EN 10219 S275J0H 530

8827 80 50 4 7,390 6 EN 10219 S275J0H 530

8828 80 50 4 7,390 12 EN 10219 S275J0H 530

8829 80 50 5 8,750 6 EN 10219 S275J0H 530

8830 80 50 5 8,750 8,60 EN 10219 S275J0H 530

8830 80 50 5 8,750 12 EN 10219 S275J0H 530

8831 80 60 2,5 5,290 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

8832 80 60 3 6,160 6 EN 10219 S275J0H 530

8833 80 60 3 6,160 12 EN 10219 S275J0H 530

8834 80 60 4 8,020 6 EN 10219 S275J0H 530

8835 80 60 4 8,020 12 EN 10219 S275J0H 530

8836 80 60 5 9,530 6 EN 10219 S275J0H 530

8837 80 60 5 9,530 12 EN 10219 S275J0H 530

8839 80 80 3 7,100 6 EN 10219 S275J0H 530

8841 80 80 3 7,100 10 EN 10219 S275J0H 530

8840 80 80 3 7,100 12 EN 10219 S275J0H 530

48464 80 80 3,6 8,530 12-13,5 EN 10210-1/2 S355J2H 532

18659 80 80 4 9,410 12-13,5 EN 10210-1/2 S355J2H 532

8847 80 80 4 9,280 6 EN 10219 S275J0H 530

8849 80 80 4 9,280 10 EN 10219 S275J0H 530

8848 80 80 4 9,280 12 EN 10219 S275J0H 530

8852 80 80 4,5 10,500 12-13,5 EN 10210-1/2 S355J2H 532

8853 80 80 5 11,600 12-13,5 EN 10210-1/2 S275J2H 532

8859 80 80 5 11,600 12-13,5 EN 10210-1/2 S355J2H 532

8854 80 80 5 11,100 6 EN 10219 S275J0H 530

8856 80 80 5 11,100 10 EN 10219 S275J0H 530

8855 80 80 5 11,100 12 EN 10219 S275J0H 530

18660 80 80 5,6 12,800 12-13,5 EN 10210-1/2 S355J2H 532

8861 80 80 6 12,970 6 EN 10219 S275J0H 531

8862 80 80 6 12,970 12 EN 10219 S275J0H 531

8865 80 80 6,3 14,200 12-13,5 EN 10210-1/2 S275J2H 532

8866 80 80 6,3 14,200 12-13,5 EN 10210-1/2 S355J2H 532

8868 80 80 7,1 15,800 12-13,5 EN 10210-1/2 S355J2H 532

18661 80 80 8 17,500 12-13,5 EN 10210-1/2 S355J2H 532

8870 80 80 8 16,360 12 EN 10219 S275J0H 531

18662 80 80 8,8 19,000 12-13,5 EN 10210-1/2 S355J2H 532

8873 81 51 5 8,900 7,50 Rong / EN 10219 S275J0H 530

8910 83 53 6 10,650 7,50 Rong / EN 10219 S275J0H 531

9058 90 50 3 6,160 6 EN 10219 S275J0H 530

9061 90 50 3,2 6,630 12-13,5 EN 10210-1/2 S275J2H 532

9062 90 50 3,2 6,630 12-13,5 EN 10210-1/2 S355J2H 532

9066 90 50 4 8,150 12-13,5 EN 10210-1/2 S355J2H 532

9064 90 50 4 8,020 6 EN 10219 S275J0H 530

9065 90 50 4 8,020 12 EN 10219 S275J0H 530

9069 90 50 5 9,990 12-13,5 EN 10210-1/2 S355J2H 532





9068 90 50 5 9,520 12 EN 10219 S275J0H 530

18669 90 50 6,3 12,300 12-13,5 EN 10210-1/2 S355J2H 532

9072 90 50 7,1 13,600 12-13,5 EN 10210-1/2 S355J2H 532

9073 90 70 4 9,280 6 EN 10219 S275J0H 530

9074 90 70 4 9,280 12 EN 10219 S275J0H 530

9075 90 90 3 8,040 6 EN 10219 S275J0H 530

9077 90 90 3 8,040 10 EN 10219 S275J0H 530

9076 90 90 3 8,040 12 EN 10219 S275J0H 530

46268 90 90 3,6 9,400 10-13,5 EN 10210-1/2 S355J2H 532

18677 90 90 4 10,700 12-13,5 EN 10210-1/2 S355J2H 532

9082 90 90 4 10,500 6 EN 10219 S275J0H 530

9084 90 90 4 10,500 10 EN 10219 S275J0H 530

9083 90 90 4 10,500 12 EN 10219 S275J0H 530

9089 90 90 5 13,100 12-13,5 EN 10210-1/2 S355J2H 532

9086 90 90 5 12,700 6 EN 10219 S275J0H 530

9087 90 90 5 12,700 12 EN 10219 S275J0H 530

9091 90 90 6 14,860 6 EN 10219 S275J0H 531

9092 90 90 6 14,860 12 EN 10219 S275J0H 531

9093 90 90 6,3 16,200 12-13,5 EN 10210-1/2 S355J2H 532

18680 90 90 7,1 18,100 12-13,5 EN 10210-1/2 S355J2H 532

9097 90 90 8 20,100 12-13,5 EN 10210-1/2 S355J2H 532

18681 90 90 8,8 21,800 12-13,5 EN 10210-1/2 S355J2H 532

9129 96 66 6 13,040 7,50 Rong / EN 10219 S275J0H 531

713 100 30 4 7,390 7,50 EN 10219 S275J0H 530

714 100 30 4 7,390 8 EN 10219 S275J0H 530

715 100 40 2 4,190 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

716 100 40 2 4,190 6 DIN 2395 (1/2)-A / EN 10025 S185 GWB 540

56089 100 40 2 4,190 8,10 EN 10219 S275J0H 530

717 100 40 3 6,160 6 EN 10219 S275J0H 530

718 100 40 3 6,160 12 EN 10219 S275J0H 530

719 100 40 4 8,020 6 EN 10219 S275J0H 530

720 100 40 4 8,020 12 EN 10219 S275J0H 530

721 100 40 5 9,520 6 EN 10219 S275J0H 530

722 100 50 2 4,550 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

31051 100 50 2 4,550 8,20 DIN 2395 (1/2)-B / EN 10025 S275J0 530

723 100 50 2,5 5,680 8,10 DIN 2395 (1/2)-B / EN 10025 S275J0 530

37773 100 50 2,5 5,680 9,10 DIN 2395 (1/2)-B / EN 10025 S275J0 530

725 100 50 3 6,630 6 EN 10219 S275J0H 530

728 100 50 3 6,630 8,10 EN 10219 S275J0H 530

37774 100 50 3 6,630 9,10 EN 10219 S275J0H 530

726 100 50 3 6,630 12 EN 10219 S275J0H 530

733 100 50 4 8,780 12-13,5 EN 10210-1/2 S355J2H 532

730 100 50 4 8,650 6 EN 10219 S275J0H 530

42464 100 50 4 8,650 9,10 EN 10219 S275J0H 530

731 100 50 4 8,650 12 EN 10219 S275J0H 530

39033 100 50 4,5 9,790 12-13,5 EN 10210-1/2 S355J2H 532




D = Outside diam.

s = Wallthickness

30

90 x 50 x 5

100 x 50 x 4,5��




D = Outside diam.

s = Wallthickness



100 x 50 x 5

100 x 100 x 5��

738 100 50 5 10,800 12-13,5 EN 10210-1/2 S355J2H 532

735 100 50 5 10,320 6 EN 10219 S275J0H 530

736 100 50 5 10,320 12 EN 10219 S275J0H 530

740 100 50 5,6 11,900 12-13,5 EN 10210-1/2 S275J2H 532

18436 100 50 5,6 11,900 12-13,5 EN 10210-1/2 S355J2H 532

34385 100 50 6 12,030 9,10 EN 10219 S275J0H 531

742 100 50 6,3 13,300 12-13,5 EN 10210-1/2 S355J2H 532

745 100 50 7,1 14,700 12-13,5 EN 10210-1/2 S355J2H 532

18437 100 50 8 16,300 12-13,5 EN 10210-1/2 S355J2H 532

36762 100 60 2,5 6,070 8,10 DIN 2395 (1/2)-B / EN 10025 S275J0 530

748 100 60 3 7,100 6 EN 10219 S275J0H 530

750 100 60 3 7,100 8,10 EN 10219 S275J0H 530

749 100 60 3 7,100 12 EN 10219 S275J0H 530

752 100 60 3,6 8,530 12-13,5 EN 10210-1/2 S355J2H 532

753 100 60 4 9,280 6 EN 10219 S275J0H 530

754 100 60 4 9,280 12 EN 10219 S275J0H 530

18444 100 60 4,5 10,500 12-13,5 EN 10210-1/2 S355J2H 532

760 100 60 5 11,600 12-13,5 EN 10210-1/2 S355J2H 532

757 100 60 5 11,100 6 EN 10219 S275J0H 530

758 100 60 5 11,100 12 EN 10219 S275J0H 530

763 100 60 6 12,970 6 EN 10219 S275J0H 531

764 100 60 6 12,970 12 EN 10219 S275J0H 531

765 100 60 6,3 14,200 12-13,5 EN 10210-1/2 S355J2H 532

767 100 60 7,1 15,800 12-13,5 EN 10210-1/2 S355J2H 532

18446 100 60 8 17,500 12-13,5 EN 10210-1/2 S355J2H 532

769 100 80 3 8,010 6 EN 10219 S275J0H 530

56087 100 80 3 8,010 8,10 EN 10219 S275J0H 530

770 100 80 3 8,010 12 EN 10219 S275J0H 530

771 100 80 4 10,500 6 EN 10219 S275J0H 530

772 100 80 4 10,500 12 EN 10219 S275J0H 530

773 100 80 5 12,700 6 EN 10219 S275J0H 530

774 100 80 5 12,700 12 EN 10219 S275J0H 530

775 100 80 6 14,860 12 EN 10219 S275J0H 531

56611 100 100 2,5 7,640 6 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

677 100 100 2,5 7,640 12 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

678 100 100 3 8,990 6 EN 10219 S275J0H 530

680 100 100 3 8,990 10 EN 10219 S275J0H 530

679 100 100 3 8,990 12 EN 10219 S275J0H 530

683 100 100 4 11,900 12-13,5 EN 10210-1/2 S275J2H 532

689 100 100 4 11,900 12-13,5 EN 10210-1/2 S355J2H 532

684 100 100 4 11,800 6 EN 10219 S275J0H 530

686 100 100 4 11,800 10 EN 10219 S275J0H 530

685 100 100 4 11,800 12 EN 10219 S275J0H 530

697 100 100 5 14,700 12-13,5 EN 10210-1/2 S355J2H 532

692 100 100 5 14,200 6 EN 10219 S275J0H 530

694 100 100 5 14,200 10 EN 10219 S275J0H 530





693 100 100 5 14,200 12 EN 10219 S275J0H 530

698 100 100 6 16,740 6 EN 10219 S275J0H 531

700 100 100 6 16,740 10 EN 10219 S275J0H 531

699 100 100 6 16,740 12 EN 10219 S275J0H 531

50253 100 100 6 16,740 12 EN 10219 S355J2H 541

704 100 100 6,3 18,200 12-13,5 EN 10210-1/2 S355J2H 532

710 100 100 8 22,600 12-13,5 EN 10210-1/2 S355J2H 532

707 100 100 8 21,390 12 EN 10219 S275J0H 531

39011 100 100 8 21,390 15 EN 10219 S275J0H 531

709 100 100 8 21,390 12 EN 10219-1/2 S355J2H 541

675 100 100 10 27,400 12-13,5 EN 10210-1/2 S355J2H 532

23295 100 100 10 27,600 12 EN 10219-1/2 S355J2H 541

39034 100 100 12,5 33,000 12-13,5 EN 10210-1/2 S355J2H 532

903 110 60 3,6 9,090 12-13,5 EN 10210-1/2 S275J2H 532

18463 110 60 3,6 9,090 12-13,5 EN 10210-1/2 S355J2H 532

18465 110 60 4,5 11,200 12-13,5 EN 10210-1/2 S355J2H 532

41606 110 60 5,6 13,700 12-13,5 EN 10210-1/2 S355J2H 532

18469 110 60 7,1 16,900 12-13,5 EN 10210-1/2 S355J2H 532

907 110 70 3 8,040 6 EN 10219 S275J0H 530

908 110 70 4 10,500 6 EN 10219 S275J0H 530

909 110 70 4 10,500 12 EN 10219 S275J0H 530

910 110 70 5 12,700 6 EN 10219 S275J0H 530

911 110 70 5 12,700 12 EN 10219 S275J0H 530

18452 110 110 4 13,200 12-13,5 EN 10210-1/2 S355J2H 532

897 110 110 4 12,990 12 EN 10219 S275J0H 531

899 110 110 5 15,810 12 EN 10219 S275J0H 531

18456 110 110 6,3 20,200 12-13,5 EN 10210-1/2 S355J2H 532

902 110 110 8 25,100 12-13,5 EN 10210-1/2 S355J2H 532

18448 110 110 10 30,600 12-13,5 EN 10210-1/2 S355J2H 532

2196 120 40 3 7,100 6 EN 10219 S275J0H 530

2197 120 40 4 9,280 6 EN 10219 S275J0H 530

2198 120 40 5 11,100 6 EN 10219 S275J0H 530

49746 120 50 2,5 6,476 8,10 DIN 2395 (1/2)-B / EN 10025 S235JRG2 530

56091 120 50 3 7,540 10 EN 10219 S275J0H 530

43877 120 50 3 7,540 9,10 EN 10219 S275J0H 530

65983 120 50 3 7,540 10,10 EN 10219 S275J0H 530

2199 120 50 3 7,540 12,20 EN 10219 S275J0H 530

48098 120 50 4 9,850 9,05 EN 10219 S275J0H 530

65984 120 50 4 9,850 10,10 EN 10219 S275J0H 530

36515 120 50 4 9,850 12,20 EN 10219 S275J0H 530

65985 120 50 5 12,100 10,10 EN 10219 S275J0H 530

36516 120 50 5 12,100 12,20 EN 10219 S275J0H 530

2201 120 60 3 8,040 6 EN 10219 S275J0H 530

2203 120 60 3 8,040 10 EN 10219 S275J0H 530

2202 120 60 3 8,040 12 EN 10219 S275J0H 530

18483 120 60 3,6 9,660 12-13,5 EN 10210-1/2 S355J2H 532




D = Outside diam.

s = Wallthickness

32

100 x 100 x 5

120 x 60 x 3,6��




D = Outside diam.

s = Wallthickness



120 x 60 x 4

120 x 120 x 6��

2207 120 60 4 10,700 12-13,5 EN 10210-1/2 S275J2H 532

2210 120 60 4 10,700 12-13,5 EN 10210-1/2 S355J2H 532

2208 120 60 4 10,500 6 EN 10219 S275J0H 530

2209 120 60 4 10,500 12 EN 10219 S275J0H 530

2211 120 60 5 13,100 12-13,5 EN 10210-1/2 S275J2H 532

2215 120 60 5 13,100 12-13,5 EN 10210-1/2 S355J2H 532

2212 120 60 5 12,700 6 EN 10219 S275J0H 530

2213 120 60 5 12,700 12 EN 10219 S275J0H 530

2216 120 60 6 14,860 6 EN 10219 S275J0H 531

2217 120 60 6 14,860 12 EN 10219 S275J0H 531

2220 120 60 6,3 16,200 12-13,5 EN 10210-1/2 S355J2H 532

2221 120 60 7 16,920 12 EN 10219 S275J0H 531

2223 120 60 7,1 18,100 12-13,5 EN 10210-1/2 S355J2H 532

18486 120 60 8 20,100 12-13,5 EN 10210-1/2 S355J2H 532

42459 120 60 10 24,300 11,7-11,9 EN 10210-1/2 S355J2H 532

2200 120 60 10 24,300 12-13,5 EN 10210-1/2 S355J2H 532

2228 120 80 3 8,990 6 EN 10219 S275J0H 530

2230 120 80 3 8,990 7,50 EN 10219 S275J0H 530

2229 120 80 3 8,990 12 EN 10219 S275J0H 530

2232 120 80 4 11,800 6 EN 10219 S275J0H 530

2233 120 80 4 11,800 12 EN 10219 S275J0H 530

2238 120 80 5 14,700 12-13,5 EN 10210-1/2 S355J2H 532

2235 120 80 5 14,200 6 EN 10219 S275J0H 530

2236 120 80 5 14,200 12 EN 10219 S275J0H 530

2239 120 80 6 16,740 6 EN 10219 S275J0H 531

2240 120 80 6 16,740 12 EN 10219 S275J0H 531

2243 120 80 6,3 18,200 12-13,5 EN 10210-1/2 S355J2H 532

2247 120 80 8 22,600 12-13,5 EN 10210-1/2 S355J2H 532

2245 120 80 8 21,400 12 EN 10219 S275J0H 531

2246 120 80 8 21,400 12 EN 10219-1/2 S355J2H 541

2227 120 80 10 27,400 12-13,5 EN 10210-1/2 S355J2H 532

54646 120 100 4 13,000 12 EN 10219 S275J0H 531

54647 120 100 5 16,000 12 EN 10219 S275J0H 531

2171 120 120 3 10,840 10 EN 10219 S275J0H 531

2170 120 120 3 10,840 12 EN 10219 S275J0H 531

18475 120 120 4 14,400 12-13,5 EN 10210-1/2 S355J2H 532

2173 120 120 4 14,300 6 EN 10219 S275J0H 531

2176 120 120 4 14,300 10 EN 10219 S275J0H 531

2174 120 120 4 14,300 12 EN 10219 S275J0H 531

2178 120 120 4,5 16,100 12-13,5 EN 10210-1/2 S275J2H 532

18476 120 120 4,5 16,100 12-13,5 EN 10210-1/2 S355J2H 532

2182 120 120 5 17,800 12-13,5 EN 10210-1/2 S355J2H 532

2181 120 120 5 17,400 10 EN 10219 S275J0H 531

2180 120 120 5 17,400 12 EN 10219 S275J0H 531

2187 120 120 6 20,510 10 EN 10219 S275J0H 531

2185 120 120 6 20,510 12 EN 10219 S275J0H 531





25030 120 120 6 20,510 12 EN 10219-1/2 S355J2H 541

2190 120 120 6,3 22,200 12-13,5 EN 10210-1/2 S355J2H 532

31050 120 120 7,1 24,700 12-13,5 EN 10210-1/2 S275J2H 532

18478 120 120 7,1 24,700 12-13,5 EN 10210-1/2 S355J2H 532

2195 120 120 8 27,600 12-13,5 EN 10210-1/2 S355J2H 532

2193 120 120 8 26,400 12 EN 10219 S275J0H 531

2194 120 120 8 26,400 12 EN 10219-1/2 S355J2H 541

2167 120 120 10 33,700 12-13,5 EN 10210-1/2 S355J2H 532

23301 120 120 10 31,200 12 EN 10219-1/2 S355J2H 541

39642 120 120 12,5 40,900 12-13,5 EN 10210-1/2 S355J2H 532

2282 125 125 5 18,170 12 EN 10219 S275J0H 531

2283 125 125 6 21,450 12 EN 10219 S275J0H 531

2662 140 70 3 9,430 12 EN 10219 S275J0H 531

18507 140 70 4 12,600 12-13,5 EN 10210-1/2 S355J2H 532

2664 140 70 4 12,360 12 EN 10219 S275J0H 531

39643 140 70 5 15,500 12-13,5 EN 10210-1/2 S355J2H 532

2666 140 70 5 15,030 12 EN 10219 S275J0H 531

2667 140 70 6 17,680 12 EN 10219 S275J0H 531

18511 140 70 6,3 19,200 12-13,5 EN 10210-1/2 S355J2H 532

2669 140 70 7 20,220 12 EN 10219 S275J0H 531

2671 140 70 7,1 21,400 12-13,5 EN 10210-1/2 S355J2H 532

2673 140 70 8 23,800 12-13,5 EN 10210-1/2 S355J2H 532

2661 140 70 10 29,000 12-13,5 EN 10210-1/2 S355J2H 532

18516 140 80 4 13,200 12-13,5 EN 10210-1/2 S355J2H 532

2678 140 80 4 13,000 12 EN 10219 S275J0H 531

39591 140 80 5 16,300 12-13,5 EN 10210-1/2 S355J2H 532

2681 140 80 5 15,800 12 EN 10219 S275J0H 531

2682 140 80 6 18,620 12 EN 10219 S275J0H 531

2683 140 80 6,3 20,200 12-13,5 EN 10210-1/2 S275J2H 532

18520 140 80 6,3 20,200 12-13,5 EN 10210-1/2 S355J2H 532

2684 140 80 7,1 22,500 12-13,5 EN 10210-1/2 S275J2H 532

2685 140 80 7,1 22,500 12-13,5 EN 10210-1/2 S355J2H 532

18521 140 80 8 25,100 12-13,5 EN 10210-1/2 S355J2H 532

2687 140 80 8,8 27,300 12-13,5 EN 10210-1/2 S355J2H 532

2674 140 80 10 30,600 12-13,5 EN 10210-1/2 S275J2H 532

2676 140 80 10 30,600 12-13,5 EN 10210-1/2 S355J2H 532

2675 140 80 10 30,200 12 EN 10219-1/2 S355J2H 541

64495 140 140 4 16,800 6 EN 10219 S275J0H 531

2637 140 140 4 16,800 12 EN 10219 S275J0H 531

2639 140 140 5 21,000 12-13,5 EN 10210-1/2 S275J2H 532

2643 140 140 5 21,000 12-13,5 EN 10210-1/2 S355J2H 532

2640 140 140 5 20,500 12 EN 10219 S275J0H 531

39012 140 140 5 20,500 15 EN 10219 S275J0H 531

2642 140 140 5 20,500 12 EN 10219-1/2 S355J2H 541

48465 140 140 5,6 23,400 12-13,5 EN 10210-1/2 S355J2H 532

2645 140 140 6 24,280 12 EN 10219 S275J0H 531




D = Outside diam.

s = Wallthickness

34

120 x 120 x 6

140 x 140 x 6��




D = Outside diam.

s = Wallthickness



140 x 140 x 6

150 x 150 x 10��

39013 140 140 6 24,280 15 EN 10219 S275J0H 531

50254 140 140 6 24,500 12 EN 10219-1/2 S355J2H 541

2650 140 140 6,3 26,100 12-13,5 EN 10210-1/2 S355J2H 532

2651 140 140 7,1 29,200 12-13,5 EN 10210-1/2 S275J2H 532

18502 140 140 7,1 29,200 12-13,5 EN 10210-1/2 S355J2H 532

2655 140 140 8 32,600 12-13,5 EN 10210-1/2 S355J2H 532

2653 140 140 8 32,400 12 EN 10219 S275J0H 531

39014 140 140 8 32,400 15 EN 10219 S275J0H 531

2654 140 140 8 32,400 12 EN 10219-1/2 S355J2H 541

2635 140 140 10 40,000 12-13,5 EN 10210-1/2 S355J2H 532

2634 140 140 10 38,100 12 EN 10219-1/2 S355J2H 541

18497 140 140 12,5 48,700 12-13,5 EN 10210-1/2 S355J2H 532

2777 150 50 3 8,870 12 EN 10219 S275J0H 530

2778 150 50 4 11,700 12 EN 10219 S275J0H 530

2779 150 50 5 14,200 12 EN 10219 S275J0H 531

2780 150 75 4 13,300 12 EN 10219 S275J0H 531

2781 150 75 5 16,200 12 EN 10219 S275J0H 531

2782 150 75 6 19,090 12 EN 10219 S275J0H 531

2737 150 100 4 14,900 12 EN 10219 S275J0H 531

2739 150 100 5 18,600 12-13,5 EN 10210-1/2 S275J2H 532

2742 150 100 5 18,600 12-13,5 EN 10210-1/2 S355J2H 532

2741 150 100 5 18,200 12 EN 10219 S275J0H 531

2743 150 100 6 21,450 12 EN 10219 S275J0H 531

50255 150 100 6 21,700 12 EN 10219-1/2 S355J2H 541

2745 150 100 6,3 23,100 12-13,5 EN 10210-1/2 S355J2H 532

2749 150 100 8 28,900 12-13,5 EN 10210-1/2 S355J2H 532

2747 150 100 8 27,700 12 EN 10219 S275J0H 531

2748 150 100 8 29,100 12 EN 10219-1/2 S355J2H 541

2735 150 100 10 35,300 12-13,5 EN 10210-1/2 S355J2H 532

43532 150 100 10 35,700 12 EN 10219-1/2 S355J2H 541

2736 150 100 12,5 42,800 12-13,5 EN 10210-1/2 S355J2H 532

2761 150 150 4 18,010 12 EN 10219 S275J0H 531

2762 150 150 5 22,100 12 EN 10219 S275J0H 531

39015 150 150 5 22,100 15 EN 10219 S275J0H 531

2763 150 150 5 22,100 12 EN 10219-1/2 S355J2H 541

2765 150 150 6 26,160 12 EN 10219 S275J0H 531

39016 150 150 6 26,160 15 EN 10219 S275J0H 531

23330 150 150 6 26,160 12 EN 10219-1/2 S355J2H 541

2768 150 150 6,3 28,100 12-13,5 EN 10210-1/2 S355J2H 532

2772 150 150 8 35,100 12-13,5 EN 10210-1/2 S355J2H 532

2770 150 150 8 33,900 12 EN 10219 S275J0H 531

39017 150 150 8 33,900 15 EN 10219 S275J0H 531

2771 150 150 8 33,900 12 EN 10219-1/2 S355J2H 541

2758 150 150 10 43,100 12-13,5 EN 10210-1/2 S355J2H 532

2757 150 150 10 40,600 12 EN 10219-1/2 S355J2H 541

39050 150 150 10 40,600 15 EN 10219-1/2 S355J2H 541





2760 150 150 12,5 52,700 12-13,5 EN 10210-1/2 S355J2H 532

3053 160 80 4 14,300 12 EN 10219 S275J0H 531

18549 160 80 5 17,800 12-13,5 EN 10210-1/2 S355J2H 532

3056 160 80 5 17,400 12 EN 10219 S275J0H 531

3058 160 80 6 20,510 12 EN 10219 S275J0H 531

50256 160 80 6 20,700 12 EN 10219-1/2 S355J2H 541

3059 160 80 6,3 22,200 12-13,5 EN 10210-1/2 S355J2H 532

18551 160 80 7,1 24,700 12-13,5 EN 10210-1/2 S355J2H 532

50257 160 80 8 26,400 12 EN 10219-1/2 S355J2H 541

18552 160 80 8 27,600 12-13,5 EN 10210-1/2 S355J2H 532

18543 160 80 10 33,700 12-13,5 EN 10210-1/2 S355J2H 532

39035 160 80 12,5 40,900 12-13,5 EN 10210-1/2 S355J2H 532

39644 160 90 4,5 16,900 12-13,5 EN 10210-1/2 S355J2H 532

3069 160 90 5 18,170 12 EN 10219 S275J0H 531

3072 160 90 6 21,450 12 EN 10219 S275J0H 531

3074 160 90 6,3 23,100 12-13,5 EN 10210-1/2 S355J2H 532

3075 160 90 7 24,620 12 EN 10219 S275J0H 531

39037 160 90 7,1 25,900 12-13,5 EN 10210-1/2 S355J2H 532

3080 160 90 8 28,900 12-13,5 EN 10210-1/2 S355J2H 532

3064 160 90 10 35,300 12-13,5 EN 10210-1/2 S355J2H 532

3040 160 160 5 23,700 12 EN 10219 S275J0H 531

3042 160 160 6 28,040 12 EN 10219 S275J0H 531

39018 160 160 6 28,040 15 EN 10219 S275J0H 531

50258 160 160 6 28,300 12 EN 10219-1/2 S355J2H 541

3045 160 160 6,3 30,100 12-13,5 EN 10210-1/2 S355J2H 532

3048 160 160 8 37,600 12-13,5 EN 10210-1/2 S355J2H 532

3047 160 160 8 36,500 12 EN 10219 S275J0H 531

50259 160 160 8 36,500 12 EN 10219-1/2 S355J2H 541

3038 160 160 10 46,300 12-13,5 EN 10210-1/2 S355J2H 532

26499 160 160 10 43,700 12 EN 10219-1/2 S355J2H 541

3039 160 160 12,5 56,600 12-13,5 EN 10210-1/2 S275J2H 532

18537 160 160 12,5 56,600 12-13,5 EN 10210-1/2 S355J2H 532

3388 180 80 4,5 17,190 12 EN 10219 S275J0H 531

18357 180 80 6 22,600 12 EN 10219 S275J0H 531

18569 180 100 5 21,000 12-13,5 EN 10210-1/2 S355J2H 532

25015 180 100 5 20,500 12 EN 10219 S275J0H 531

3358 180 100 5,6 23,400 12-13,5 EN 10210-1/2 S355J2H 532

3360 180 100 6 24,280 12 EN 10219 S275J0H 531

50261 180 100 6 24,500 12 EN 10219-1/2 S355J2H 541

18570 180 100 6,3 26,100 12-13,5 EN 10210-1/2 S355J2H 532

3364 180 100 7,1 29,200 12-13,5 EN 10210-1/2 S275J2H 532

3365 180 100 7,1 29,200 12-13,5 EN 10210-1/2 S355J2H 532

3366 180 100 8 32,600 12-13,5 EN 10210-1/2 S355J2H 532

39592 180 100 8,8 35,600 12-13,5 EN 10210-1/2 S355J2H 532

39038 180 100 10 40,000 12-13,5 EN 10210-1/2 S355J2H 532

32011 180 100 10 37,500 12 EN 10219-1/2 S355J2H 541




D = Outside diam.

s = Wallthickness

36

150 x 150 x 12,5

180 x 100 x 10��




D = Outside diam.

s = Wallthickness



180 x 100 x 12,5

200 x 200 x 8��

39593 180 100 12,5 48,700 12-13,5 EN 10210-1/2 S355J2H 532

3377 180 180 6 31,810 12 EN 10219 S275J0H 531

3378 180 180 6 31,810 15 EN 10219 S275J0H 531

50262 180 180 6 32,100 12 EN 10219-1/2 S355J2H 541

3381 180 180 6,3 34,000 12-13,5 EN 10210-1/2 S355J2H 532

3384 180 180 8 42,700 12-13,5 EN 10210-1/2 S355J2H 532

3382 180 180 8 41,500 12 EN 10219 S275J0H 531

39019 180 180 8 41,500 15 EN 10219 S275J0H 531

50263 180 180 8 41,500 12 EN 10219-1/2 S355J2H 541

39598 180 180 8,8 46,700 12-13,5 EN 10210-1/2 S355J2H 532

3373 180 180 10 52,500 12-13,5 EN 10210-1/2 S355J2H 532

3372 180 180 10 50,700 12 EN 10219-1/2 S355J2H 541

3376 180 180 12,5 64,400 12-13,5 EN 10210-1/2 S355J2H 532

50264 180 180 12,5 60,500 12 EN 10219-1/2 S355J2H 541

4050 200 100 4 18,000 12 EN 10219 S275J0H 531

39024 200 100 4 18,000 15 EN 10219 S275J0H 531

4051 200 100 5 22,100 12 EN 10219 S275J0H 531

18580 200 100 5,6 25,100 12-13,5 EN 10210-1/2 S355J2H 532

4054 200 100 6 26,160 12 EN 10219 S275J0H 531

39026 200 100 6 26,160 15 EN 10219 S275J0H 531

50265 200 100 6 28,300 12 EN 10219-1/2 S355J2H 541

4056 200 100 6,3 28,100 12-13,5 EN 10210-1/2 S355J2H 532

4060 200 100 8 35,100 12-13,5 EN 10210-1/2 S355J2H 532

4058 200 100 8 34,000 12 EN 10219 S275J0H 531

4059 200 100 8 34,000 12 EN 10219-1/2 S355J2H 541

4047 200 100 10 43,100 12-13,5 EN 10210-1/2 S355J2H 532

4046 200 100 10 40,600 12 EN 10219-1/2 S355J2H 541

4048 200 100 12,5 52,700 12-13,5 EN 10210-1/2 S275J2H 532

4049 200 100 12,5 52,700 12-13,5 EN 10210-1/2 S355J2H 532

4065 200 120 5 23,700 12 EN 10219 S275J0H 531

4066 200 120 6 28,040 12 EN 10219 S275J0H 531

18589 200 120 6,3 30,100 12-13,5 EN 10210-1/2 S355J2H 532

18591 200 120 8 37,600 12-13,5 EN 10210-1/2 S355J2H 532

4070 200 120 8 36,500 12 EN 10219 S275J0H 531

50266 200 120 10 46,300 12 EN 10219-1/2 S355J2H 541

55490 200 120 10 46,300 12-13.5 EN 10210-1/2 S355J2H 532

18585 200 120 12,5 56,600 12-13,5 EN 10210-1/2 S355J2H 532

18372 200 200 5 29,940 12 EN 10219 S275J0H 531

4083 200 200 6 35,580 12 EN 10219 S275J0H 531

39020 200 200 6 35,580 15 EN 10219 S275J0H 531

30793 200 200 6 37,200 12 EN 10219-1/2 S355J2H 541

4085 200 200 6,3 38,000 12-13,5 EN 10210-1/2 S275J2H 532

4087 200 200 6,3 38,000 12-13,5 EN 10210-1/2 S355J2H 532

4092 200 200 8 47,700 12-13,5 EN 10210-1/2 S355J2H 532

4090 200 200 8 46,500 12 EN 10219 S275J0H 531

39021 200 200 8 46,500 15 EN 10219 S275J0H 531





4091 200 200 8 46,500 12 EN 10219-1/2 S355J2H 541

4078 200 200 10 58,800 12-13,5 EN 10210-1/2 S355J2H 532

4077 200 200 10 56,300 12 EN 10219-1/2 S355J2H 541

39051 200 200 10 56,300 15 EN 10219-1/2 S355J2H 541

4080 200 200 12,5 72,300 12-13,5 EN 10210-1/2 S275J2H 532

4081 200 200 12,5 72,300 12-13,5 EN 10210-1/2 S355J2H 532

50267 200 200 12,5 68,300 12 EN 10219-1/2 S355J2H 541

4082 200 200 16 90,300 12-13,5 EN 10210-1/2 S275J2H 532

18595 200 200 16 90,300 12-13,5 EN 10210-1/2 S355J2H 532

26548 220 110 8 38,900 13,30 EN 10210-1/2 S355J2H 532

4472 220 120 6 30,180 12 EN 10219 S275J0H 531

18601 220 120 6,3 32,000 12-13,5 EN 10210-1/2 S355J2H 532

4474 220 120 8 40,200 12-13,5 EN 10210-1/2 S275J2H 532

4475 220 120 8 40,200 12-13,5 EN 10210-1/2 S355J2H 532

4468 220 120 10 49,400 12-13,5 EN 10210-1/2 S275J2H 532

4470 220 120 10 49,400 12-13,5 EN 10210-1/2 S355J2H 532

23303 220 120 10 46,900 12 EN 10219-1/2 S355J2H 541

18598 220 120 12,5 60,500 12-13,5 EN 10210-1/2 S355J2H 532

50268 220 220 6 39,590 12 EN 10219-1/2 S355J2H 541

41608 220 220 6,3 41,900 12-13,5 EN 10210-1/2 S355J2H 532

18610 220 220 7,1 47,000 12-13,5 EN 10210-1/2 S355J2H 532

4488 220 220 8 51,530 12 EN 10219 S275J0H 531

50269 220 220 8 51,530 12 EN 10219-1/2 S355J2H 541

39594 220 220 10 65,100 12-13,5 EN 10210-1/2 S355J2H 532

23305 220 220 10 62,600 12 EN 10219-1/2 S355J2H 541

39595 220 220 12,5 80,100 12-13,5 EN 10210-1/2 S355J2H 532

18607 220 220 14,2 90,100 12-13,5 EN 10210-1/2 S355J2H 532

18608 220 220 16 100,000 12-13,5 EN 10210-1/2 S355J2H 532

4854 250 100 5 26,100 12 EN 10219 S275J0H 531

4855 250 100 6 31,500 12-13,5 EN 10210-1/2 S355J2H 532

18388 250 100 8 40,400 12 EN 10219 S275J0H 531

4861 250 150 6 35,580 12 EN 10219 S275J0H 531

39028 250 150 6 35,580 15 EN 10219 S275J0H 531

50270 250 150 6 35,580 12 EN 10219-1/2 S355J2H 541

39596 250 150 6,3 38,000 12-13,5 EN 10210-1/2 S355J2H 532

4863 250 150 8 47,700 12-13,5 EN 10210-1/2 S275J2H 532

4866 250 150 8 47,700 12-13,5 EN 10210-1/2 S355J2H 532

4864 250 150 8 46,500 12 EN 10219 S275J0H 531

4865 250 150 8 46,500 12 EN 10219-1/2 S355J2H 541

4859 250 150 10 58,800 12-13,5 EN 10210-1/2 S355J2H 532

4858 250 150 10 56,300 12 EN 10219-1/2 S355J2H 541

4860 250 150 12,5 72,300 12-13,5 EN 10210-1/2 S355J2H 532

4877 250 250 6 45,240 12 EN 10219 S275J0H 531

50271 250 250 6 45,240 15 EN 10219-1/2 S355J2H 541

4880 250 250 6,3 47,900 12-13,5 EN 10210-1/2 S355J2H 532

4884 250 250 8 60,300 12-13,5 EN 10210-1/2 S355J2H 532




D = Outside diam.

s = Wallthickness

38

200 x 200 x 8

250 x 250 x 8��




D = Outside diam.

s = Wallthickness



250 x 250 x 8

400 x 100 x 8��

4882 250 250 8 59,100 12 EN 10219 S275J0H 531

50272 250 250 8 59,100 15 EN 10219-1/2 S355J2H 541

4873 250 250 10 74,500 12-13,5 EN 10210-1/2 S355J2H 532

49840 250 250 10 72,000 12 EN 10219-1/2 S355J2H 541

4874 250 250 12,5 91,900 12-13,5 EN 10210-1/2 S355J2H 532

4876 250 250 16 115,000 12-13,5 EN 10210-1/2 S355J2H 532

18626 260 140 6,3 38,000 12-13,5 EN 10210-1/2 S355J2H 532

4920 260 140 7,1 42,600 12-13,5 EN 10210-1/2 S355J2H 532

42576 260 140 8 47,700 12-13,5 EN 10210-1/2 S355J2H 532

4923 260 140 8 46,900 12 EN 10219 S275J0H 531

42577 260 140 10 58,800 12-13,5 EN 10210-1/2 S355J2H 532

49303 260 140 10 56,300 12 EN 10219-1/2 S355J2H 541

39597 260 140 12,5 72,300 12-13,5 EN 10210-1/2 S355J2H 532

4932 260 180 6,3 41,900 12-13,5 EN 10210-1/2 S355J2H 532

4935 260 180 8 52,700 12-13,5 EN 10210-1/2 S355J2H 532

4927 260 180 10 65,100 12-13,5 EN 10210-1/2 S355J2H 532

4929 260 180 12,5 80,100 12-13,5 EN 10210-1/2 S355J2H 532

18637 260 260 7,1 56,000 12-13,5 EN 10210-1/2 S355J2H 532

18639 260 260 8,8 68,800 12-13,5 EN 10210-1/2 S355J2H 532

4936 260 260 10 77,700 12-13,5 EN 10210-1/2 S355J2H 532

53895 260 260 11 85,000 13,50 EN 10210-1/2 S355J2H 532

46269 260 260 14,2 108,000 10-13,5 EN 10210-1/2 S355J2H 532

4940 260 260 16 120,000 12-13,5 EN 10210-1/2 S355J2H 532

50273 300 100 6 35,800 12 EN 10219-1/2 S355J2H 541

50274 300 100 8 46,500 12 EN 10219-1/2 S355J2H 541

50275 300 100 10 57,200 12 EN 10219-1/2 S355J2H 541

50276 300 200 6 45,200 12 EN 10219-1/2 S355J2H 541

5620 300 200 6,3 47,900 12-13,5 EN 10210-1/2 S355J2H 532

5623 300 200 8 60,300 12-13,5 EN 10210-1/2 S355J2H 532

50277 300 200 8 59,100 12 EN 10219-1/2 S355J2H 541

5613 300 200 10 74,500 12-13,5 EN 10210-1/2 S355J2H 532

49304 300 200 10 72,000 12 EN 10219-1/2 S355J2H 541

5615 300 200 12,5 91,900 12-13,5 EN 10210-1/2 S355J2H 532

5617 300 200 16 115,000 12-13,5 EN 10210-1/2 S355J2H 532

5627 300 300 8 72,800 12-12,2 EN 10210-1/2 S355J2H 532

50278 300 300 8 71,600 12 EN 10219-1/2 S355J2H 541

31079 300 300 10 90,200 12-12,2 EN 10210-1/2 S355J2H 532

50279 300 300 10 88,400 12 EN 10219-1/2 S355J2H 541

26490 300 300 12,5 112,000 12-12,2 EN 10210-1/2 S355J2H 532

50280 300 300 12,5 108,000 12 EN 10219-1/2 S355J2H 541

30770 300 300 16 141,000 12-12,2 EN 10210-1/2 S355J2H 532

33807 350 350 8 85,400 12-12,2 EN 10210-1/2 S355J2H 532

33808 350 350 10 106,000 12-12,2 EN 10210-1/2 S355J2H 532

38623 350 350 12,5 131,000 15 EN 10210-1/2 S355J2H 532

33809 350 350 16 166,000 12-12,2 EN 10210-1/2 S355J2H 532

6870 400 100 8 60,300 13,8-14 EN 10210-1/2 S355J2H 532





6876 400 200 8 72,800 12-12,5 EN 10210-1/2 S355J2H 532

50281 400 200 8 71,600 12 EN 10219-1/2 S355J2H 541

23571 400 200 10 90,200 12-13,5 EN 10210-1/2 S355J2H 532

50282 400 200 10 88,400 12 EN 10219-1/2 S355J2H 541

26494 400 200 12,5 112,000 12-12,2 EN 10210-1/2 S355J2H 532

50283 400 200 12,5 108,000 12 EN 10219-1/2 S355J2H 541

26495 400 200 16 141,000 12-12,2 EN 10210-1/2 S355J2H 532

26496 400 400 10 122,000 12-12,2 EN 10210-1/2 S355J2H 532

26497 400 400 12,5 151,000 12-12,2 EN 10210-1/2 S355J2H 532

23290 400 400 16 191,000 12-12,2 EN 10210-1/2 S355J2H 532

6880 400 400 20 235,000 8,5-9,2 EN 10210-1/2 S355J2H 532

23572 450 250 10 106,000 12-12,2 EN 10210-1/2 S355J2H 532

26532 450 250 12,5 131,000 12-12,2 EN 10210-1/2 S355J2H 532

23573 450 250 16 166,000 12-12,2 EN 10210-1/2 S355J2H 532

7457 500 300 10 122,000 12-12,2 EN 10210-1/2 S355J2H 532

26498 500 300 12,5 151,000 12-12,2 EN 10210-1/2 S355J2H 532

26531 500 300 16 191,000 12-12,2 EN 10210-1/2 S355J2H 532




D = Outside diam.

s = Wallthickness

40

400 x 200 x 8

500 x 300 x 16��




Van Leeuwen Pipe and Tube GroupLindtsedijk 20, 3336 LE ZwijndrechtP.O. Box 50, 3330 AB ZwijndrechtTelephone: +31 78 6252525Fax: +31 78 6252020E-mail: [email protected]: www.vanleeuwen.nl

Europe

The Netherlands

Van Leeuwen Buizen Van Leeuwen Precisie BV Van Leeuwen Stainless BVLindtsedijk 100, 3336 LE Zwijndrecht Hamburgweg 6, 7418 ES Deventer Industrieweg 26, 4153 BW BeesdP.O. Box 1, 3330 AA Zwijndrecht P.O. Box 771, 7400 AT Deventer P.O. Box 19, 4153 ZG BeesdTelephone: +31 78 6252525 Telephone: +31 570 500700 Telephone: +31 345 687777Fax: +31 78 6252020 Fax: +31 570 500777 Fax: +31 345 683304E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]: www.vanleeuwenbuizen.com Internet: www.vanleeuwen-precisie.nl Internet: www.stainless.nl

Belgium Germany

Van Leeuwen Buizen België NV Löwe & Jaegers GmbHSchaarbeeklei 189, Am Schlütershof 30, 47059 Duisburg1800 Vilvoorde P.O. Box 100953, 47009 DuisburgTelephone: +32 2 2554000 Telephone: +49 203 99340Fax: +32 2 2520576 Fax: +49 203 9934165E-mail: [email protected] E-mail: [email protected]: www.vanleeuwen.be Internet: www.loewejaegers.de

Branches: Siegen, Vaihingen/Enz

France United Kingdom

Van Leeuwen Tubes SA Van Leeuwen Precision LtdLe Pont à l’Ane, 45120 Châlette-sur-Loing Unit 7-9 Provincial ParkP.O. Box 26, 45120 Châlette-sur-Loing Nether Lane, Ecclesfield, Sheffield S35 9ZXTelephone: +33 238 281515 Telephone: +44 114 2577577Fax: +33 238 281522 Fax: +44 114 2570639E-mail: [email protected] Branches: Arbroath, Middlesbrough, SouthamptonBranches: Le Havre, Lyon

Asia and the Middle-East

Singapore Indonesia Malaysia

Van Leeuwen Pipe and Tube Van Leeuwen Pipe and Tube Van Leeuwen Pipe and Tube(Singapore) Pte Ltd (Singapore) Pte Ltd (Malaysia) Sdn Bhd4, Pioneer Place, Singapore 627893 Wisma Dharmala Sakti (7th Floor) 38-2 Jalan Tun Sambanthan 3P.O. Box 237, Singapore 916108 Sudirman Kav. 32, Jakarta 10220 50470 Kuala LumpurTelephone: +65 68979301 Telephone: +62 21 5700967-8 Telephone: +60 32747155Fax: +65 68979318 Fax: +62 21 5700968 Fax: +60 32747664E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]

Thailand United Arab Emirates China

Van Leeuwen Pipe and Tube Van Leeuwen Pipe and Tube Van Leeuwen Pipe and Tube(Thailand) Ltd (Middle East) LLC (Singapore) Pte LtdChonburi Industrial Estate (Bo-Win) Al Ain Al Ahlia Insurance Building Unit 211 Pacheer Commercial Centre341 Moo 6, Highway no. 331 KM 91 Hamdan Street, P.O. Box 47144 No 555 Nanjing West RoadDistrict Bo-Win Amphur Sri Racha Abu Dhabi Shanghai 200041 P.R. ChinaChonburi Province 20230 Telephone: +971 26 271 840 Telephone: +86 21 3218 20 11Telephone: +66 38 345765-6 Fax: +971 26 271 244 Fax: +86 21 3218 20 21Fax: +66 38 345247-8 E-mail: [email protected] E-mail: [email protected]: [email protected]: Chonburi

Other regions

Australia Canada

Van Leeuwen Pipe and Tube Van Leeuwen Pipe and TubeAustralia Pty Ltd (Canada) Inc241-222 Toongabbie Road 2875 - 64th AvenueGirraween NSW 2145 (Sydney) Edmonton, Alberta T6P 1R1P.O. Box 346, Toongabbie NSW 2146 Telephone: +1 403 4697410Telephone: +61 2 98961111 Fax: +1 403 4665970Fax: +61 2 96884801 Branche: CalgaryE-mail: [email protected]: Adelaide, Brisbane, Melbourne, Perth

Internationalnetwork

Van Leeuwen Buizen

Lindtsedijk 100, 3336 LE Zwijndrecht, The Netherlands

P.O. Box 1, 3330 AA Zwijndrecht, The Netherlands

Phone: +31 78 6252525 Fax: +31 78 6252020

E-mail: [email protected]

www.vanleeuwenbuizen.nl

Van Leeuwen Buizen Belgium

Schaarbeeklei 189, 1800 Vilvoorde, Belgium

Phone: +32 2 2554000 Fax: +32 2 2520576

E-mail: [email protected]

www.vanleeuwen.be

1 22w0 Hollow Sections

Documents

Transcript of 1 22w0 Hollow Sections