BOM for Electrical Installation works

SR. No. DESCRIPTION OF MATERIAL Qty.

Make of Material

MCCB's - Schneider Compact(for comm. MCCB)/ABB/Siemens(VL)/ L&T

MCB's and DB's - Legrand/Schneider/ABBWires - Polycab/FinolexCables - Polycab/ Ravin/TerracomTermination - Dowells/JainsonCT's - Kappa / L&TSelector Switch - Kaycee / L&T / BCHIndicating Lamps - Seimens / L&T / TeknikPART - I : PANELS AND DISTRIBUTION BOARDS.

a Supply, Installation, Testing and Commisioning of Following Panels and DB's with proper gauge MS sheet and shall comply with IS standards. b Main Panels and Sub Panels will have standard meters and phase indicators.c All BusBar will be of Alluminiumd All Panels shall be of IP-42 Protection

1.1 DC LT Panel ( As per the SLD attached ) 2Incomer

Including , Phase indicators, ON, OFF and Trip Indicators, Load ManagersBus Coupler1600A 4P ACB--- 1 Nos. With Electrical/ mechanical Interlocking among incomers & buscouplers.Bus Bar1600A 4P, Al Busbar, with Current Density not more than 0.8A/sqmm. Outgoings630A 4P MCCB--- 2 Nos. (for 300kVA UPS I/P PNL & Spare)315A 4P MCCB--- 2 Nos.( PAC PNL-Gr fl & Spare)250A 4P MCCB--- 2Nos.(1Nos. SMPS & Spare)1000A TPN ACB--- 2 Nos. (PAC Panel first floor & Spare)63A 4P MCB--- 10 Nos. (LDB, RDB, 10kVA UPS & 7 spares)

1.2 UPS I/P Panel 300kVA UPS Set ( As per the SLD attached ) 2Incomer 630A 4P MCCB--- 1No.Including , Phase indicators, ON, OFF and Trip Indicator, Load ManagersBus Bar630A 4P CU Busbar, with Current Density not more than 1.5A/sqmm. Outgoings315A 4P MCCB--- 2 Nos.(150kVA NXr UPS Module)

1.3 UPS O/P Panel 300kVA UPS Set ( As per the SLD attached ) 2

1600A 4P ACB--- 2 Nos. (one from Main LT-PNL & one for Mobile DG)- with TVSS of 250 KA with Surge counter.

Incomer 315A 4P MCCB--- 2No. (without InterlockingIncluding , Phase indicators, ON, OFF and Trip Indicator.Bus Bar630A 4P CU Busbar, with Current Density not more than 1.5A/sqmm. Outgoings315A 4P MCCB--- 3 Nos.(2Nos. PDU of 150kVA & spare)

1.4 PAC Panel for Server Room ( As per the SLD attached ) 2Incomer 1000A TPN ACB--- 1No.Including , Phase indicators, ON, OFF and Trip Indicator, Load ManagersBus Bar1000A TPN CU Busbar, with Current Density not more than 1.5A/sqmm. Outgoings125A TPN MCCB--- 7 Nos.(6 PAC & 1 spare)63A TPN MCB -- 3Nos.(spares)32A DP MCB -- 4Nos. (2Nos. Split AC (in OMCR & Lobby & 2 spares)

1.5 PAC Panel for Electrical Room ( As per the SLD attached ) 2Incomer 315A TPN MCCB--- 1No.Including , Phase indicators, ON, OFF and Trip Indicators. Load ManagersBus Bar315A TPN CU Busbar, with Current Density not more than 1.5A/sqmm. Outgoings63A TPN MCCB---6 Nos. (5 PAC & 1 spare)63A DP MCB - 6 Nos. (Spare)

1.6 150 kVA PDU- With Isolation Transformer ( As per the SLD attached ) 4Incomer 315A 4P MCCB--- 1No.Including , Phase indicators, ON, OFF and Trip Indicators & Load ManagerOutgoings16A DP MCB--- 36 Nos. (30Racks + 6 spares)32A DP MCB--- 6 Nos. (Spares)63A DP MCB--- 6 Nos. (Spares)K-13 Isolation Transformer DYn11, 415V/415V, with Soft Starter, TVSS

1.7 LPDB for lighting distribution 26 way TPN DB single door63A TPN MCB 1no.incoming & ELMCB10A SP MCB - 18Nos on outgoings. Equally distributed on three phases.

1.8 RPDB for Raw Power distribution 26 way TPN DB single door

63A TPN MCB 1no. Incoming 16A SP MCB - 12Nos on outgoings. Equally distributed on three phases.

1.9 10 kVA UPS DB for UPS Power distribution (BMS Load + Emergency Ltg) 26 way DB single door63A DP MCB 1no. Incoming 10 SP MCB - 8Nos on outgoings.

1.10 125A Automatic Transfer Switch for PAC Units in Server room 6125A ATS with enclosure & with bypass arrangement

1.11 63A Automatic Transfer Switch for PAC Units in Electrical room 563A ATS with enclosure & with bypass arrangement

Total Part - IPART - II : CABLES, BBT AND TERMINATION.

Brands of cables: Universal, gloster, polycab, niccoNotes The rates for all item of work shall include :-

a Effecting proper and adequate connections at terminations.b Ensuring that provision is left in building components and trenches as the work proceeds for incorporation of cable supports at a later date.cd Providing proper supports for cable terminal boxes .e Providing heavy duty copper lugs, insulation tape etc. at joints and terminations.f All fixing accessories such as GI saddles, screws, raw plugs, suitable size Anchor Fasteners etc.g Wire/Cable Joint by crimping type lugs.h Cutting chases, holes and making good the same wherever required. ( Not Valid for any Concrete Slab)i Testing of the Cables in the Manufactures works and providing test certificates with the handover documents is the sole responsibility of the Contractor.

A 100

2.1 3.5C x 300 Sq.mm Al Arm, FRLS 0

2.2 1C x 150Sq.mm Cu flex FRLS 720

2.3 1C x 120 Sq.mm Cu flex FRLS 1300

2.4 3.5C x 240 Sq.mm Cu Arm FRLS 360

2.5 3.5C X 35 Sq.mm Cu Arm FRLS 318

2.6 4C x 10 Sq.mm Cu Arm FRLS 405

2.7 3C X 6 Sq.mm Cu flex FRLS 1020

2.8 4CX 6 sqmm Cu arm FRLS 120

Providing all fixing accessories such as clamping devices, Tie's, nuts and bolts, screws where laid in trenches or trays.(Not to consider Trays and Trenches rates, it will be paid Seperatly)

Sandwitch Type Alluminium Bus ducting from Main Panel, DG panel to DC LT Panels. 1600A, 4P, suitable for indoor & Outdoor application

2.5 Terminations for Cable

2.5.1 3.5C x 300 Sq.mm Al Arm

2.5.2 1C x 150 Sq.mm Cu flex 64

2.5.3 1C x 120 Sq.mm Cu flex 80

2.5.4 3.5C X 240 Sq.mm Cu Arm 16

2.5.5 3.5C x 35 Sq.mm Cu Arm 36

2.5.6 4C x 10 Sq.mm Cu Arm 38

2.5.7 3C x 4 Sq.mm Cu flex 192

2.5.8 4C x 6 Sq.mm Cu arm 8

Total Part - II

PART-III : MOBILE SOCKETS AND STRAIGHT PLUGS.a All the mobile sockets and straight plugs should be of IP 44 type and of approved make.

3.2 32A DP+E Mobile Socket with plug 60

Total Part - IIIPART - IV :CABLE TRAYS (of Pre Babricated, Standard Make, Extendabale)

Notes The rates for all item of work shall include :-a Supply and Installation with all nescessary supports and hardware.b The work should be carreid out as specified in the specification sheet. c Colour of the Trays has to be confirmed by the customer.

4.1 70mm x 300 mm wide perforated poweder coated black color (Power Tray) 4804.3 70mm x 450 mm wide perforated poweder coated black colour (Power Tray) 2404.5 100mm X 100mm OFC Tray 4804.6 75mm X 600mm Ladder cable tray in electrical room (Power Tray) 240

Total Part - IVPART-V : POINT WIRING AND CONDUITING WORK

Notes: These notes shall apply to all the relevant wiring items described in the schedule of items given below :-abcd The point wiring shall comply to IS 732.e The entire work has to be carried out under the direct supervision of PMC/Prime Contractor.f All materials under this schedule shall deemed to be included by the Contractor in his scope.g The entire work to be carried out as per the specifications laid down in the tenders, approved drawings,and as per final directions of PMC.

All points wiring, circuit wiring, sub mains wiring shall be done using rigid PVC conduits of minimum 1.6mm thickness and shall comply with IS 2509 of 1973 or amendments there of and FIA approval.All switch boards under the point wiring shall be the standard boxes available and the same shall be suitable for concealed work. The boxes should be of Electro Plated as per the Manufactures standard practice and should be suitable to accommodate The entire wiring shall have continuous 2.5 sq.mm. approved make FR Copper conductor earth wire for earth continuity having Green colour in 660/1100 volts grade.

h

4.1 Primary point from MCB/ 5A Switch 42with 3 x 2.5 sqmm wire

4.2 Secondary Point Looped from item 4.1 84

4.3 Primary point for Raw power with 353 x 4sqmm wire

4.4 Secondary point looped from item 4.3 70

4.5 5A Switch with plate and back box 84

4.6 5/15A Socket + 15 A switch withall accessareis 65

4.7 3 nos.5 pin 5 A socket + 15 A switch withall accessareis

4.7 63 Amps socketall accessareis 5Total Part - V

PART-VI : LIGHTING FIXTURES & AND ACCESSORIES.Notes:

a All the fixtures shall be suitable for single phase, 50 cycles, 230 Volts, AC supply system.b All light fixtures shall be provided with Electronic ballast as described in the schedule.c All fixtures shall be factory wired with copper conductor wires.d All fixtures shall be supplied with fluorescent lamps/incandescent bulbs or any other special type bulbse All the fixtures shall be quoted of approved make only.

5.1 2' x 2' Ceiling suspended LED light fixtures 4

5.2 2' x 2' Direct Mount LED light fixtures 250

5.3 9 Watt LED Spot Light Fixtures 18

5.4 Motion Sensor to control lighting fixtures in rows & passages 6

Total Part - VI

PART - VII : EARTHING AND EARTHING STRIPS.a All earth pits shall be as per IS 3043 with latest amendments.b Earthing stations should contain relevant grade of charcoal/coke and salt packed around the earth plate/earth pipe as called for in the item.

The point wiring shall include wiring of light outlet of any length from distribution board via switch or to the point and including providing circuit wiring, in minimum 25 mm dia MS Conduit of 1.8 mm and using wires as specified below of approved

The rates for lighting fixtures and fans shall include all accessories and supply of all materials that may be required to make the fixture complete in all respects such as :-

cd An earth ring with relevant earth test terminal boxes shall to be provided at regular intervals.ef The Contractor has to provide heavy duty Cover of size 450 x 450 x 8 mm thick to the Earthing Chamber.g The cover is to be sand blasted and then Powder coated using Matt Jet Black Colour. The Cover is to be fabricated using 8 mm thick Chequered Plate.

7.10

7.3 6 sqmm braided copper tape for gride earthing 2000

7.4 6 sqmm green cable 750

7.5 25 x 3 copper Strip for Earthing of panel 600

7.6 50 x 6 GI Strip for Earthing of panel 400

7.7 1c x 150 sqmm cu flexible (Green Colour) 400

7.8 Dedicated Earthing Box with 50mm x 10mm x 200mmLenght 20Tinned copper strip with 6mm holes

7.9 150x150x3mm Danger Notice Board & 415 Enameled Danger Board 4

7.10 Shock Treatment chart with Frame In Local & English Language 4

7.11 First Aid Medical Box 4

7.12 1000mm wide 20mm thick Rubber Matting suitable for 1100 Grade 50

Total Part - VII

GRAND TOTAL

VAT @ 14.5%Service Tax @ 10.3%Total After TaxesGrand total with taxes

Earthing shall be done at indicted location by the Consultants. The minimum distance between the two earth station shall be 3 meters and that from the building is 2500 mm.

Adequate number of earth strips with proper sized holes shall be provided for extending earthing/looping earth connections at various floors shall be provided and executed as per the requirement.

Earthing pits with 600 x 600 x 6mm Chemical Earthing (Gel Type) upto 10 feet deep with all accesoreis to maintain earth resistance below 2 ohm guranteed.

BOM for Electrical Installation works

Unit Rate Amount Total Amount

Supply Supply Basic

Make of Material

MCCB's - Schneider Compact(for comm. MCCB)/ABB/Siemens(VL)/ L&T

MCB's and DB's - Legrand/Schneider/ABBWires - Polycab/FinolexCables - Polycab/ Ravin/TerracomTermination - Dowells/JainsonCT's - Kappa / L&TSelector Switch - Kaycee / L&T / BCHIndicating Lamps - Seimens / L&T / TeknikPART - I : PANELS AND DISTRIBUTION BOARDS.Supply, Installation, Testing and Commisioning of Following Panels and DB's with proper gauge MS sheet and shall comply with IS standards. Main Panels and Sub Panels will have standard meters and phase indicators.All BusBar will be of Alluminium

Set 599,180 29,960 1,198,360 59,920 1,258,280

Set 188,415 8,200 376,830 16,400 393,230

Set 266,260 11,500 532,520 23,000 555,520

Installation Installation

Set 359,995 15,600 719,990 31,200 751,190

Set 164,180 7,000 328,360 14,000 342,360

Set 137,850 6,000 551,400 24,000 575,400

Nos 8,450 1,245 16,900 2,490 19,390

Nos 5,210 1,245 10,420 2,490 12,910

Nos 2,875 800 5,750 1,600 7,350

Nos 89,675 2,400 538,050 14,400 552,450

Nos 80,440 1,800 402,200 9,000 411,200

4,680,780 198,500 4,879,280 PART - II : CABLES, BBT AND TERMINATION.

The rates for all item of work shall include :-Effecting proper and adequate connections at terminations.Ensuring that provision is left in building components and trenches as the work proceeds for incorporation of cable supports at a later date.

Providing proper supports for cable terminal boxes .Providing heavy duty copper lugs, insulation tape etc. at joints and terminations.All fixing accessories such as GI saddles, screws, raw plugs, suitable size Anchor Fasteners etc.Wire/Cable Joint by crimping type lugs.Cutting chases, holes and making good the same wherever required. ( Not Valid for any Concrete Slab)Testing of the Cables in the Manufactures works and providing test certificates with the handover documents is the sole responsibility of the Contractor.

Mtr 21,535 1,800 2,153,500 180,000 2,333,500

Mtr 1,180 148 - - -

Mtr 1,512 92 1,088,640 66,240 1,154,880

Mtr 1,215 82 1,579,500 106,600 1,686,100

Mtr 8,225 122 2,961,000 43,920 3,004,920

Mtr 1,211 60 385,098 19,080 404,178

Mtr 467 43 189,135 17,415 206,550

Mtr 196 30 199,920 30,600 230,520

Mtr 309 40 37,080 4,800 41,880

Providing all fixing accessories such as clamping devices, Tie's, nuts and bolts, screws where laid in trenches or trays.(Not to consider Trays and Trenches rates,

625 810

Nos 110 215 40,000 13,760 53,760

Nos 83 175 8,800 14,000 22,800

Nos 1,045 740 1,328 11,840 13,168

Nos 243 270 37,620 9,720 47,340

Nos 87 190 3,306 7,220 10,526

Mtr 30 100 5,760 19,200 24,960

Mtr 82 135 656 1,080 1,736

8,691,343 545,475 9,236,818 -

PART-III : MOBILE SOCKETS AND STRAIGHT PLUGS.All the mobile sockets and straight plugs should be of IP 44 type and of approved make.

Nos 1,145 250 68,700 15,000 83,700

0 68,700 15,000 83,700 PART - IV :CABLE TRAYS (of Pre Babricated, Standard Make, Extendabale)The rates for all item of work shall include :-Supply and Installation with all nescessary supports and hardware.The work should be carreid out as specified in the specification sheet. Colour of the Trays has to be confirmed by the customer.

Mtr 785 135 376,800 64,800 441,600 Mtr 1,060 162 254,400 38,880 293,280 Mtr 322 95 154,560 45,600 200,160 Mtr 775 175 186,000 42,000 228,000

0 971,760 191,280 1,163,040 PART-V : POINT WIRING AND CONDUITING WORK These notes shall apply to all the relevant wiring items described in the schedule of items given below :-

The point wiring shall comply to IS 732.The entire work has to be carried out under the direct supervision of PMC/Prime Contractor.All materials under this schedule shall deemed to be included by the Contractor in his scope.The entire work to be carried out as per the specifications laid down in the tenders, approved drawings,and as per final directions of PMC.

All points wiring, circuit wiring, sub mains wiring shall be done using rigid PVC conduits of minimum 1.6mm thickness and shall comply with IS 2509 of 1973 or All switch boards under the point wiring shall be the standard boxes available and the same shall be suitable for concealed work. The boxes should be of Electro Plated as per the Manufactures standard practice and should be suitable to accommodate The entire wiring shall have continuous 2.5 sq.mm. approved make FR Copper conductor earth wire for earth continuity having Green colour in 660/1100 volts

Nos 1,142 300 47,964 12,600 60,564

Nos. 856 215 71,904 18,060 89,964

Nos 1,404 300 49,140 10,500 59,640

Nos 1,053 215 73,710 15,050 88,760

nos 142 95 11,928 7,980 19,908

nos 345 95 22,425 6,175 28,600

nos 586 150 - - -

nos 2,775 200 13,875 1,000 14,875 290,946 71,365 362,311

PART-VI : LIGHTING FIXTURES & AND ACCESSORIES.

All the fixtures shall be suitable for single phase, 50 cycles, 230 Volts, AC supply system.All light fixtures shall be provided with Electronic ballast as described in the schedule.All fixtures shall be factory wired with copper conductor wires.All fixtures shall be supplied with fluorescent lamps/incandescent bulbs or any other special type bulbsAll the fixtures shall be quoted of approved make only.

nos. 8,526 350 34,104 1,400 35,504 Office Area

nos. 21,144 450 5,286,000 112,500 5,398,500 Server Room,Office Area

nos. 2,865 150 51,570 2,700 54,270 Reception Area,FM200 Cyl, POA Room

nos. 5,455 250 32,730 1,500 34,230

5,404,404 118,100 5,522,504

PART - VII : EARTHING AND EARTHING STRIPS.All earth pits shall be as per IS 3043 with latest amendments.Earthing stations should contain relevant grade of charcoal/coke and salt packed around the earth plate/earth pipe as called for in the item.

The point wiring shall include wiring of light outlet of any length from distribution board via switch or to the point and including providing circuit of 1.8 mm and using wires as specified below of approved

The rates for lighting fixtures and fans shall include all accessories and supply of all materials that may be required to make the fixture complete in all respects

An earth ring with relevant earth test terminal boxes shall to be provided at regular intervals.

The Contractor has to provide heavy duty Cover of size 450 x 450 x 8 mm thick to the Earthing Chamber.The cover is to be sand blasted and then Powder coated using Matt Jet Black Colour. The Cover is to be fabricated using 8 mm thick Chequered Plate.

nos - - -

mtr 120 35 240,000 70,000 310,000

mtr 56 30 42,000 22,500 64,500

mtr 530 60 318,000 36,000 354,000

mtr 207 95 82,800 38,000 120,800

mtr 1,512 92 604,800 36,800 641,600

nos 1,902 350 38,040 7,000 45,040

nos 115 100 460 400 860

nos 427 100 1,708 400 2,108

nos 996 90 3,984 360 4,344

mtr 1,068 70 53,400 3,500 56,900

1,385,192 214,960 1,600,152

21,493,125 1,354,680 22,847,805

3,116,503139,532

24,609,628 1,494,212

26,103,840

Earthing shall be done at indicted location by the Consultants. The minimum distance between the two earth station shall be 3 meters and that from the building

Adequate number of earth strips with proper sized holes shall be provided for extending earthing/looping earth connections at various floors shall be provided

Office Area 430.1 2820.1684629.596 7449.764

Server Room,Office Area 1527.767 225.7504

Reception Area,FM200 Cyl, POA Room

CIVIL BOQ

S.No Description Qty Unit

1 False flooring (Server room, POA Room, ANG room) 6755 Sq.ft

2 945 Sq.ft

3 1750 Sq.ft

4

17500 Sq.ft

517500 Sq.ft

6

11 Nos.

7

4 Nos.

8

0 Nos.

Supply Rate

Supply Amount

Providing and fixing approved make and quality Calcium sulfate raised flooring of 600x800mm tiles on 750mm adjustable height Galvanized iron (GI) pedestals and GI stingers. The tiles should have antistatic laminates with UDL Loading 1700kg/sqmtr

False ceiling (in OMCR Room, Lobby, Passage) (POA & ANG room removed)Providing and fixing modular ceiling provided mineral fibre board of 600mmx600mmx15mm in true horizontal level using a 15mm T section to be laid on armstrong or approved equivalent grid system.

Aerocon Partition for First Floor Internal Partitions 75mm thick, 2 Hrs fire rated..

Providing and applying FIRE Rated Paint paint of approved make and shade to give an even shade over a primer coat and 2 finishing coats of plastic emulsion. (fire rated Paint of makes - 3M, Cromet)

Providing and laying POP punning over cement plaster in perfect line and level with thickness of 10 – 12mm including making good chases, grooves, edges banding.

Supplying and fixing fire rated of 2 hours fire rating steel doors size 1200 x 2400mm size, double leaf, fire rated vision panel of 230 x 230mm, SS Ball bearing butt hinges, mortise sash lock, SS lever with internal thumb turn etc (shakti met, radiant, promate)

Supplying and fixing fire rated of 2 hours fire rating steel doors size 1000 x 2400mm size, single leaf, fire rated vision panel of 230 x 230mm, SS Ball bearing butt hinges, mortise sash lock, SS lever with internal thumb turn etc. (shakti met, radiant, promate)

Providing and fixing powder coated Aluminium doors using 100x38.1mmx2mm section for door frame and 100mm top and bottom section using 12mm clear toughened glass with all necessary hardware, heavy duty floor spring, 10inch long SS handle complete. Door size 1200 x 2400mm double leaf

9

0 Nos.

10

13510 Sq.ft

11

1300 Sq.ft

12 4000 Sq.ft

1324 Sq.ft

14 12 Sq.ft

15 Aluminium Caging for FM200 Cylinders on first Floor 250 Sq.ft

16 Ramp 1 Sq.ft

17 Step 5 Sq.ft

18 0 Lot

19 3430 Sq.ft

Providing and fixing powder coated Aluminium doors using 100x38.1mmx2mm section for door frame and 100mm top and bottom section using 12mm clear toughened glass with all necessary hardware, heavy duty floor spring, 10inch long SS handle complete. Door size 1000 x 2400mm single leaf,

Providing and fixing 19mm thick Armaflex floor insulation below the false flooring, joints should be finished properly as per manufacturer’s specifications. The rate shall be inclusive of cleaning the surface to make it free from dust.

Providing and laying approved make and quality vitrified tile flooring polished tiles 600x600mm size flooring to match floor pattern using chemical adhesives and laid to corrected level of +/-6mm and joints pointed with approved quality jointing compound including curing.

Providing and laying KOTTAH tile flooring of tile size 2-'0" x 2'-0", of approved quality, approved colour shade as per approved pattern using chemical tile adhesive (IF REQUIRED) laid to proper line and level and joints pointed with tile jointing compound including curing, mirror polishing by three different cutting stones nos as directed, finished and final cleaning etc. The measurements shall be based on actual laid area of floor & skirting and no extra payment shall be paid towards wastage. The rates shall include cost of laying protective PVC sheets & POP which shall keep the floor covered at all times till handing over of the site etc. complete.

2 hrs Fire Rated Glass with its fixing, all accessories etc in ANG room & POA Room (Size of View Panel - Height 900mm X Width 1200mm)

Auto Glow Signages showing EXIT, MESSAGES, YOU ARE HERE Signages, ROOM Names etc.

Provision of opening in wall for loading bay ( for material movement) (NOT REQUIRED)

Brick works 230mm thick with plaster (For Partions of Ground floor)

20

11 Sq.ft

21 Executive Chairs 12 Sq.ft

22 Reception table 1 Sq.ft

23 Security and safety of the material on Site 1 lot

24 House Keeping during entire execution 1 lot

25 Temporary Power during construction phase 1 lot

0TOTAL Without Taxes

-

TOTAL With Taxes

P/Fixing Workstations with 3" thk partitions with 1" thk table top finished with laminate also includes Metal keyboards tray CPU trolley and 1 no 18" x 18' drawer box with 3 nos drawers complete with all hardwares finished in laminate.(Table Size 4'-0" x 2'-0") (FIRE RETARDANT COATING TO BE APPLIED on Furniture)

CIVIL BOQ

Installation Rate

Installation Amount

00

- -

#REF!