08 71 00/DOO BuyLine 8956 DHSI SEALING SYSTEMS
Transcript of 08 71 00/DOO BuyLine 8956 DHSI SEALING SYSTEMS
DHSI projects with non-proprietary performance based systems specifications:
Gasketing/Weatherstripping for Sound/Smoke
The rebuild of the Pentagon (9-11) for smoke, fire & sound assemblies, both HM & wood doorsBellagio, Conrad Maldives, Ritz-Carltons, Four Seasons, Marriotts, Courtyards, All Hilton brands, Microtel, etc.Andrews and Pope Air Force Base, US Embassy Baghdad, Homeland Security offices, Federal installationsYale, Northeastern, Duke, Bowdoin, U of MD, UVA, U of Missouri, and many others
Manufacturers of patented frame seals, door bottoms, privacy guards and thresholds for smoke, fire, sound, sight, security and weatherstripping
Visit the website for more information: www.dhsi-seal.com
DHSI SEALING SYSTEMS
Affordable solutions to common problems
Patents #5,577,349, #6,058,654, #6,266,924, #6,381,905, #6,442,901, #6,244,636, #7,062,881 and Patents Pending
PrisonsPsychiatric/Detention CentersOffices
UniversitiesHospitalsGovernment
Senior LivingApartmentsHotels
#105-3HJ “Cush ‘N’ Seal” Frame Seal with 3 fins at Hinge Jamb©
Color Choices: Off-White, Dark Brown and Black
#105 “Cush ‘N’ Seal” Standard 4-fin Frame Seal x opening size©
#105-B “Cush ‘N’ Seal” “Breakaway” x opening size© ©
Meets ADA transition, NFPA 101 Self Closing and NFPA 80 2007 Fire Code Requirements
DOOR PANEL: STC 34Typical 20 minParticle Core
LOCKJAMB
SEALS!SSEEAALLLSSS!!DHSI
SEALS!“Cush ‘N’ Seal”
“Cush ‘N’ Seal” Operating STC 32
by DHSI©
©
SEALS!SSSEEAALLLSSSS!!DHSI
SEALS!
“Cush ‘N’ Seal” Operating STC 32
by DHSI©
“Cush ‘N’ Seal” ©HINGEJAMB
DOOR PANEL: STC 34Typical 20 minParticle Core
Adhesive warranted for life of the installation at interior
BREAKS APART!
#SA x length x color.250"
#SA-B x length x color
#AMA3-2 x length
copyrightDHSI17 Silver St., Rochester, NY 14611 T: (585) 235-8543 F: (585) 235-0431 E: [email protected] W: www.dhsi-seal.com
D H S IOOR AND ARDWARE YSTEMS, NC.
1Go to www.dhsi-seal.com for the complete 16-page brochure
SEALS FOR DOUBLE EGRESS FRAMES
Four fins have the highest field STC Ratings in the industry for standard 20 or 90 minute Guest Entry or Connecting Room Doors.Available in sets of 3, 4, 7 and 8 foot lengths
Three-fin seal option. The only seal that does not create bind on full-mortise continuous hinges. 3 fins used on hinge jamb(s) only.
Anti-Ligature: “Cush ‘N’ Seal” #105-B “Breakaway” © installs continuously but snaps apart every 8 inches and tears off the frame in 8” pieces when removal is attempted.
.490"
.450"
Self-Adhesive Surface AstragalAvailable in 7 and 8 foot lengthsFor pairs active or double egress Hollow MetalAvailable in Off-White, Light Brown and Dark Brown
with “Breakaway” © Anti-Ligature
Sealing Systems: 90 minute Positive Pressure Rated
meets UL 1784 & UL10C
10C 1784 AIR SOUND
#SA l th l
Astragals - Mortise and Surface for wood and hollow metal doors
1/4"
#SA SurfaceAstragal
#SA SurfaceAstragal
Adjustable Mortise AstragalAvailable in 7 and 8 foot lengths standard, longerlengths and inserts available.
.355" .500"
.800"
08 71 00/DOOBuyLine 8956
Sealing Systems: 90 minute Positive Pressure Rated
meets UL 1784 & UL10C
Door Bottoms / Door Sweeps
Patents #5,577,349, #6,058,654, #6,266,924, #6,381,905, #6,442,901, #6,244,636, #7,062,881 and Patents Pending
For a Hollow Metal Door
#AMDB3-3 x CC#AMDB3-2 x AMU x CC
Conversion channel for installation ininverted channel in bottom of hollow metal doors. Door bottom and channel can be factory precut and preassembled.
#AMDB3-3#AMDB3-2 x AMUAdd “x SWE”
3 standard inserts2 “AMU” insertsSolid Wood Lock Edge option
10C 1784 AIR AMU SOUND
#AMDB installed at Hinge Edge
AMDB3-3#SSDB3-3#SSDB3-2 x AMU
3 standard inserts2 “AMU” inserts
#CS36#CS36 x AMU-3
35 3/4"35 3/4" with 3 “AMU” fins
#SAS x color x handing#SAS x AMU x color x handing
Color Choices: Off-White, Duronodic Dark Bronze,Champagne and Anodized Aluminum
Color Choices: Off-White, Duronodic Dark Bronze,Champagne and Anodized Aluminum
All DHSI door bottom seals are available with the patented “AMU” option.©
copyrightDHSI17 Silver St., Rochester, NY 14611 T: (585) 235-8543 F: (585) 235-0431 E: [email protected] W: www.dhsi-seal.com
D H S IOOR AND ARDWARE YSTEMS, NC.
2 Go to www.dhsi-seal.com for the complete 16-page brochure
.500”
.950”
#CS Cap Sweep
Made for 1 3/4” thick door
1 3/4" DOOR DOOR BOTTOM1/2” FINS ADJUSTDOWNWARDADDITIONAL 1/2"FOR PROPER ENGAGEMENT1/8"
(TYP.)
3/4"
2 3/4"
Room Side Hall Side
1/2"
DOOR BOTTOM CLEARANCE:See installation instructions
for (WH) approval.
#FT 2.75
RISER IF DESIRED
A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
OTHER LENGTHS ARE AVAILABLEAND FIELD REPLACEABLE.
#AMDB3 Adjustable Mortise Door Bottom
#AMDB3-CC Conversion Channel for HM Doors
#CTT 2.75 3/4"
2 3/4"RISER IF DESIRED 5/8"
3/8" TILE
UP TO 1/8" MASTIC
TILE TUCKSUNDER THRESHOLD
1/8"(TYP.)
A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
HINGE EDGEOF DOOR SHOWN
1 3/4" DOORAS SHOWNSWEEPADJUSTABLE1/4" UP AND 3/16" DOWN
Room Side Hall Side
RECOMMENDED DOORBOTTOM CLEARANCE:
1/4" or 3/8” if AMU
#SAS “Secur-A-Seal” Security Door Bottom
.880”
1.750"
1.750"
1/8"(TYP.)
3/4"
2 3/4"
#FT 2.75
RISER IF DESIRED
A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
3/8"
RECOMMENDEDDOOR BOTTOM
CLEARANCE:
Room Side Hall Side
1 3/4" DOOR
SEALS UPTO 1 1/4"
OTHER LENGTHSARE AVAILABLE
AND FIELD REPLACEABLE..880"
#SSDB3 Surface Door Bottom
1.84"
.500"
.750"
#AMU "Allowance and Means for Undercut" OptionU "©
Color Choices: Off-White, Dark Brown and Black
Allows air to pass for positive pressure hallways with "air recovery" HVAC Design; or for bathroom fans and/or PTAC units requiring a non-ducted air supply.
Blocks light and offers sound attenuation.
Not just for hotels! Also used on Schools, offices, apartments, etc.!
Use DHSI Architectural Details for submittals.
Quadruple seal for sound or weather.Fully Adjustable for out of level floorsOther sizes and fin lengths available.
Double or Triple seal for sound or weather. Fully Adjustable1/2" standard flexible and durable inserts - Replaceable 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1” inserts availableInserts warranted for life of the installation
Fully Adjustable Double or Triple seal for sound or weather.Snap-On Cover allows SSDB to be used with Floor Pivots.Fully Adjustable with Concealed Screw Attachment. 1/2" standard flexible and durable inserts - Replaceable1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1” inserts availableInserts warranted for life of the installation
Seals against light, noise, odor, smoke.Guards against fiber optic cameras, rodents, and Hook Tools.Also used on access control & secured openings at computer rooms
SSDBCap Sweep
SAS
1.751”
.355"
.500"
.800"
3 standard inserts2 “AMU” inserts
standard“AMU”
Sealing Systems: 90 minute Positive Pressure Rated
meets UL 1784 & UL10C
Door Bottoms / Door Sweeps
Patents #5,577,349, #6,058,654, #6,266,924, #6,381,905, #6,442,901, #6,244,636, #7,062,881 and Patents Pending
For a Hollow Metal Door
#AMDB3-3 x CC#AMDB3-2 x AMU x CC
Conversion channel for installation ininverted channel in bottom of hollow metal doors. Door bottom and channel can be factory precut and preassembled.
#AMDB3-3#AMDB3-2 x AMUAdd “x SWE”
3 standard inserts2 “AMU” insertsSolid Wood Lock Edge option
10C 1784 AIR AMU SOUND
#AMDB installed at Hinge Edge
AMDB3-3#SSDB3-3#SSDB3-2 x AMU
3 standard inserts2 “AMU” inserts
#CS36#CS36 x AMU-3
35 3/4"35 3/4" with 3 “AMU” fins
#SAS x color x handing#SAS x AMU x color x handing
Color Choices: Off-White, Duronodic Dark Bronze,Champagne and Anodized Aluminum
Color Choices: Off-White, Duronodic Dark Bronze,Champagne and Anodized Aluminum
All DHSI door bottom seals are available with the patented “AMU” option.©
copyrightDHSI17 Silver St., Rochester, NY 14611 T: (585) 235-8543 F: (585) 235-0431 E: [email protected] W: www.dhsi-seal.com
D H S IOOR AND ARDWARE YSTEMS, NC.
2 Go to www.dhsi-seal.com for the complete 16-page brochure
.500”
.950”
#CS Cap Sweep
Made for 1 3/4” thick door
1 3/4" DOOR DOOR BOTTOM1/2” FINS ADJUSTDOWNWARDADDITIONAL 1/2"FOR PROPER ENGAGEMENT1/8"
(TYP.)
3/4"
2 3/4"
Room Side Hall Side
1/2"
DOOR BOTTOM CLEARANCE:See installation instructions
for (WH) approval.
#FT 2.75
RISER IF DESIRED
A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
OTHER LENGTHS ARE AVAILABLEAND FIELD REPLACEABLE.
#AMDB3 Adjustable Mortise Door Bottom
#AMDB3-CC Conversion Channel for HM Doors
#CTT 2.75 3/4"
2 3/4"RISER IF DESIRED 5/8"
3/8" TILE
UP TO 1/8" MASTIC
TILE TUCKSUNDER THRESHOLD
1/8"(TYP.)
A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
HINGE EDGEOF DOOR SHOWN
1 3/4" DOORAS SHOWNSWEEPADJUSTABLE1/4" UP AND 3/16" DOWN
Room Side Hall Side
RECOMMENDED DOORBOTTOM CLEARANCE:
1/4" or 3/8” if AMU
#SAS “Secur-A-Seal” Security Door Bottom
.880”
1.750"
1.750"
1/8"(TYP.)
3/4"
2 3/4"
#FT 2.75
RISER IF DESIRED
A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
3/8"
RECOMMENDEDDOOR BOTTOM
CLEARANCE:
Room Side Hall Side
1 3/4" DOOR
SEALS UPTO 1 1/4"
OTHER LENGTHSARE AVAILABLE
AND FIELD REPLACEABLE..880"
#SSDB3 Surface Door Bottom
1.84"
.500"
.750"
#AMU "Allowance and Means for Undercut" OptionU "©
Color Choices: Off-White, Dark Brown and Black
Allows air to pass for positive pressure hallways with "air recovery" HVAC Design; or for bathroom fans and/or PTAC units requiring a non-ducted air supply.
Blocks light and offers sound attenuation.
Not just for hotels! Also used on Schools, offices, apartments, etc.!
Use DHSI Architectural Details for submittals.
Quadruple seal for sound or weather.Fully Adjustable for out of level floorsOther sizes and fin lengths available.
Double or Triple seal for sound or weather. Fully Adjustable1/2" standard flexible and durable inserts - Replaceable 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1” inserts availableInserts warranted for life of the installation
Fully Adjustable Double or Triple seal for sound or weather.Snap-On Cover allows SSDB to be used with Floor Pivots.Fully Adjustable with Concealed Screw Attachment. 1/2" standard flexible and durable inserts - Replaceable1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”, 1” inserts availableInserts warranted for life of the installation
Seals against light, noise, odor, smoke.Guards against fiber optic cameras, rodents, and Hook Tools.Also used on access control & secured openings at computer rooms
SSDBCap Sweep
SAS
1.751”
.355"
.500"
.800"
3 standard inserts2 “AMU” inserts
standard“AMU”
08 71 00/DOOBuyLine 8956
Transition Strips
Patents #5,577,349, #6,058,654, #6,266,924, #6,381,905, #6,442,901, #6,244,636, #7,062,881 and Patents Pending
Carpet-to-Carpet Transitions
#FT 2.75 x length x color2 3/4"
3/4"A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
Carpet-to-Tile/Enhanced Carpet Transitions
#CTT 2.75 x length x color2 3/4"
3/8" TILE orEnhanced Carpet
A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
3/4"
Tile-to-Tile/Enhanced Carpet Transitions
3/8" TILE orEnhanced Carpet
3/8" TILE orEnhanced Carpet
A TYPICAL3/8" Tile orEnhanced Carpet
#TTT 2.75 x length x color
3/4"
2 3/4"
27 CUSTOM COLORS AVAILABLE, contact DHSI for color pallette and pricing
thresholdFA/SB
"Tek" Screwinto Frame
Frame
SIDE VIEW
FA/SB
FRAMETHRESHOLD
The FA/SB assists the installer in establishing proper width and square.
The DHSI threshold is factory machined to accept the #FA/SB.
DHSI Transition Strips create an ideal transition between different flooring surfaces.
Stock colors: Black, Dark Brown and Grey
1/8"(TYP.)
A TYPICAL3/8" CARPET
A TYPICAL1/4" PADDING
13/16"
ADJUSTABLE
1/2"SPACER BY OTHERS #CTC-ADJ
5 1/2” Threshold Shown - Adjustable up to 12 3/8” Available - Factory Sized
#CTC-ADJ x Size
#FA/SB Frame Alignment Security Bracket
13/16"#TTT-ADJ1/2"SPACER
BY OTHERS
ADJUSTABLE5 1/2” Threshold Shown - Adjustable up to 12 3/8” Available - Factory Sized
#TTT-ADJ x Size
3/8" TILE orEnhanced Carpet
#HS-CT 3.50
Carpet-to-Concrete 3 1/2" x 3/4"
#HS-CT 2.75 VCT
Carpet-to-VCT Tile 2 3/4" x 3/4"
#CTM2
Carpet-to-wood/tile on cork 2 3/4" x 13/16"
#HS 2.75
Half Saddle Threshold 2 3/4" x 1/2"
VCT Half Saddle Threshold 2 3/4" x 1/2"
#HS 2.75 VCT
#FT Riser
Spacers available if greater heights required2 1/2" x 3/16"
#FLS 2.75 12"1/8" or 1/4"
Fire rated frame levelling shim also levels the threshold at the same time - 2 3/4" width
Ask for sample details (from over 150) such as a mortise door bottom with “Solid Wood Edge (“SWE”) and a marble threshold or for some specific requirement. Custom details available at no charge.
copyrightDHSI17 Silver St., Rochester, NY 14611 T: (585) 235-8543 F: (585) 235-0431 E: [email protected] W: www.dhsi-seal.com
D H S IOOR AND ARDWARE YSTEMS, NC.
3Patents #5,577,349, #6,058,654, #6,266,924, #6,381,905, #6,442,901, #6,24
Go to www.dhsi-seal.com for the complete 16-page brochure
Ask for sample details (from o
Architectural Details
Complies with NFPA 80: carpet not acceptable under Connecting doors
Carpet-to-Carpet Transitions
Tile-to-Tile/Enhanced Carpet Transitions
Privacy Guards
Patents #5,577,349, #6,058,654, #6,266,924, #6,381,905, #6,442,901, #6,244,636, #7,062,881 and Patents Pending
copyrightDHSI17 Silver St., Rochester, NY 14611 T: (585) 235-8543 F: (585) 235-0431 E: [email protected] W: www.dhsi-seal.com
D H S IOOR AND ARDWARE YSTEMS, NC.
4 Go to www.dhsi-seal.com for the complete 16-page brochure
Keep guests from (illegally) propping open entry fire doorsPrevent Accidental Lock Out from the Conventional Flip-LatchADA and NFPA 80 2007 code compliant
#SAL “Secur-A-Latch” Privacy Keeper
FRAME EDGEOF
DOOR
FACE
OF
DOOR
#SAL-HOFRAME
EDGEOF
DOOR
FACE
OF
DOOR
FOR YOUR
COMFORT
AND SAFETY
PLEASE USE
DEADBOLT
Privacy and SafetyNO GAP = #SAL-CONN
EDGEOF
DOOR
FACE
OF
DOOR
WARNING:
DOOR LOCKS
UPON CLOSING
FRAME
FOR YOUR
COMFORT
AND SAFETY
PLEASE USE
DEADBOLT
FOR YOUR
COMFORT
AND SAFETY
PLEASE USE
DEADBOLT
3"
1 1/4"
WARNING:DOOR LOCKS
AUTOMATICALLY
UPON CLOSING
1 1/4"
#SAL-D1 #SAL-D2
Performance based specifications and Warranty
At issue: Life Safety, security and comfort.
A Manufacturer provide evidence the products will work in the field under industry allowable tolerances for warp and out-of-plumb? And still keep torque on the lever under 15 inch pounds?A warranty that the sealing products will also meet related inspection requirements for NFPA 80?
Would your client expect that the specifications require:
NFPA 80:Protect your client’s future: Ask DHSI for a re-cap of NFPA 80 and related codes which also apply to existing as well as new construction.
Other products are available. Consult DHSI if you need a solution.
Magnet holds "SAL" in locked position.Prevents door from opening.
Allows simple emergency ingress.
Spring holds "SAL" in unlocked positionPush to engage and secure.Does not re-engage itself.
"Touch release"© to disengage magnet.Also disengages quietly upon door closing.
Spring resets "SAL".
frame walldoor
DISENGAGED
Magnet holds "SAL" in locked position.on
door frame wall
ENGAGED
"Touch release"© to disengage magnet.
door frame wall
AUTO-RELEASE
The typical swing-bar door guard is NOT compliant to NFPA 80!
Th t i l i b d d
Eliminate the biggest "problem product" in the industry:
The Conventional Flip Latch Privacy Keeper is not compliant per new updates and changes in NFPA 80.
This applies to new and existing openings.
#SAL eliminates door damage, edge guards, noise complaints, adjustments and is CODE COMPLIANT.
#SAL “Secur-A-Latch” Privacy Keeper
#SAL-D1 and #SAL-D2 #SAL-HO #SAL-CONN #DS Door Saver
Color Choices: US3, US4, US10, US10B, US15, US26, US26D
Plastic decals cover the holes left in the door and frame from the 'swing-bar' door latch, especially if #SAL now mounted at ADA height of 48”
Allows service personnel to legally hold the door open in unoccupied roomNote: the hold-open is not inherent in the design of SAL.
Does not allow opposite guest at connecting to see past door.Does not allow easy hooking of lever if deadbolt not engaged
Holds door open without having to bend over Non-Skid
Ask for sample details (from over 150) such as a mortise door bottom with “Solid Wood Edge (“SWE”) and a marble threshold or for some specific requirement. Custom details available at no charge.Ask for sample details (fr
Architectural Details