07 Medium and High Pressure Valves R2 - SAMI...
Transcript of 07 Medium and High Pressure Valves R2 - SAMI...
Page 1
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Low, medium and high pressure valves Low, medium and high pressure valves Low, medium and high pressure valves Low, medium and high pressure valves ---- ContentsContentsContentsContents Contents
CO
NT
EN
TS
15,000 psi
Ordering Information p. 2
Needle Valves p. 3
Check Valves p. 7
Accessories p. 8
20,000 psi
Ordering Information p. 10
Needle Valves p. 11
Check Valves p. 15
Accessories p. 16
30,000 psi Ordering Information p. 10
Needle Valves p. 22
60,000 psi
Ordering Information p. 10
Needle Valves p. 27
Check Valves p. 31
Accessories p. 32
Ball Valves
Ordering Information P. 38
15,000 psi p. 39
20,000 psi p. 40
Adapters p. 42
Repair Kits p. 49
Technical Information p. 53
Page 2
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Ordering Information Ordering Information Ordering Information Ordering Information ---- Low Pressure Valves & Accessories Low Pressure Valves & Accessories Low Pressure Valves & Accessories Low Pressure Valves & Accessories ---- 15,000 psi15,000 psi15,000 psi15,000 psi Ordering information
Valve Series Valve Series Valve Series Valve Series
S15S15S15S15 15,000 p.s.i.
Valve SeriesValve SeriesValve SeriesValve Series Body PatternBody PatternBody PatternBody Pattern In/OutIn/OutIn/OutIn/Out
S15S15S15S15 V01V01V01V01 T11T11T11T11
Body PatternBody PatternBody PatternBody Pattern
V01V01V01V01 F/F Two way straight valve
V10V10V10V10 M/F Two way straight valve
V02V02V02V02 F/F Two way angle valve
F01F01F01F01 F/F Soft Check Valve
F02F02F02F02 F/F Ball Check Valve
F05F05F05F05 F/F NPT Cross
F17F17F17F17 M/F NPT Street Elbows
F20F20F20F20 M/F NPT Street Tees
In/OutIn/OutIn/OutIn/Out
T11T11T11T11 1/4” NPT
T12T12T12T12 3/8” NPT
T13T13T13T13 1/2” NPT
15
KP
SI - O
RD
ER
ING
INF
OR
MA
TIO
N
Page 3
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Low Pressure Needle Valves Low Pressure Needle Valves Low Pressure Needle Valves Low Pressure Needle Valves ---- 15,000 psi15,000 psi15,000 psi15,000 psi Needle Valves 15kpsi
15
,00
0 p
si
SAMI INSTRUMENTS low pressure needle valves are designed for liquid and gas flow control. Available in a variety of body styles, our valves are suitable for manual operation in temperature ranging from -73°C to 315°C ( from –100°F to 600°F ) . SAMI INSTRUMENTS low pressure needle valves are available in various tubing sizes to satisfy different requirements: • Pressure: 15,000 psi ( 1034 bar ) . • Connections from 1/4 ” to 1/2” NOT threads. • Non rotating stem prevents galling and scoring. • Stem sleeve and packing gland materials have been selected to achieve extended thread cycles and reduced handle
torque. • Standard materials of construction include 316 L cold-worked stainless steel and glass-filled PTFE.
Page 4
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 15kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) E mmE mmE mmE mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S15V01T11S15V01T11S15V01T11S15V01T11 1/4 ” NPT
50.80 (2.00)
25.40 (1.00)
50.80 (2.00)
41.28 (1.63)
30.16 (1.19)
122.90 (4.84)
80.00 (3.15)
6.00 (0.24)
9.40 (0.37)
16.00 (0.63)
19.05 (0.75)
5.50 (0.22)
S15V01T12S15V01T12S15V01T12S15V01T12 3/8 ”NPT
50.80 (2.00)
25.40 (1.00)
53.98 (2.13)
41.28 (1.63)
30.16 (1.19)
126.06 (4.96)
80.00 (3.15)
6.00 (0.24)
9.40 (0.37)
16.00 (0.63)
25.40 (1.00)
5.50 (0.22)
S15V01T13S15V01T13S15V01T13S15V01T13 1/2 ”NPT
63.50 (2.50)
31.75 (1.25)
70.00 (2.76)
54.00 (2.13)
38.13 (1.50)
159.70 (6.29)
100.00 (3.94)
9.00 (0.35)
9.40 (0.37)
17.50 (0.69)
32.00 (1.26)
8.00 (0.31)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Two Way Straight Needle Valves F/F Two Way Straight Needle Valves F/F Two Way Straight Needle Valves F/F Two Way Straight Needle Valves F/F ---- 15,000 psi15,000 psi15,000 psi15,000 psi
15
,00
0 p
si
Page 5
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 15kpsi
Order code Order code Order code Order code In/In/In/In/OutOutOutOut
A mmA mmA mmA mm ( i nch )( i nch )( i nch )( i nch )
B mmB mmB mmB mm ( i nch )( i nch )( i nch )( i nch )
C mmC mmC mmC mm ( i nch )( i nch )( i nch )( i nch )
E mmE mmE mmE mm ( i nch )( i nch )( i nch )( i nch )
F* mmF* mmF* mmF* mm ( i nch )( i nch )( i nch )( i nch )
G mmG mmG mmG mm ( i nch )( i nch )( i nch )( i nch )
H mmH mmH mmH mm ( i nch )( i nch )( i nch )( i nch )
L mmL mmL mmL mm ( i nch )( i nch )( i nch )( i nch )
M mmM mmM mmM mm ( i nch )( i nch )( i nch )( i nch )
SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S15V02T11S15V02T11S15V02T11S15V02T11 1/4 ” NPT
50.80 (2.00)
25.40 (1.00)
53.98 (2.13)
30.16 (1.19)
126.06 (4.96)
80.00 (3.15)
6.00 (0.24)
9.40 (0.37)
16.00 (0.63)
19.05 (0.75)
5.50 (0.22)
S15V02T12S15V02T12S15V02T12S15V02T12 3/8 ”NPT
50.80 (2.00)
25.40 (1.00)
54.77 (2.16)
30.16 (1.19)
126.87 (4.99)
80.00 (3.15)
6.00 (0.24)
9.40 (0.37)
16.00 (0.63)
25.40 (1.00)
5.50 (0.22)
S15V02T13S15V02T13S15V02T13S15V02T13 1/2 ”NPT
63.50 (2.50)
31.75 (1.25)
70.00 (2.76)
38.13 (1.50)
159.70 (6.29)
100.00 (3.94)
9.00 (0.35)
9.40 (0.37)
17.50 (0.69)
32.00 (1.26)
8.00 (0.31)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Two Way Angle Needle Valves F/F Two Way Angle Needle Valves F/F Two Way Angle Needle Valves F/F Two Way Angle Needle Valves F/F ---- 15,000 psi15,000 psi15,000 psi15,000 psi
15
,00
0 p
si
Page 6
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 15kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) E mmE mmE mmE mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S15V10T13S15V10T13S15V10T13S15V10T13 1/2 ” NPT
63.50 (2.50)
31.75 (1.25)
70.00(2.76)
57.00 (2.24)
38.13 (1.50)
159.70 (6.29)
100.00 (3.94)
9.00 (0.35)
9.40 (0.37)
17.50 (0.69)
32.00 (0.98)
8.00 (0.31)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Two Way Straight Needle Valves M/F Two Way Straight Needle Valves M/F Two Way Straight Needle Valves M/F Two Way Straight Needle Valves M/F ---- 15,000 psi15,000 psi15,000 psi15,000 psi
15
,00
0 p
si
Page 7
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Check Valves 15kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch )
ORIFICE ORIFICE ORIFICE ORIFICE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S15F01T11S15F01T11S15F01T11S15F01T11 1/4 ” NPT
79.0 (3.111)
22.23 (0.875)
22.23 (0.875)
3.20 (0.126)
S15F01T12S15F01T12S15F01T12S15F01T12 3/8 ”NPT
89.2 (3.511)
25.40 (1.000)
25.40 (1.000)
5.60 (0.220)
S15F01T13S15F01T13S15F01T13S15F01T13 1/2 ”NPT
106.8 (4.204)
32.00 (1.260)
32.00 (1.260)
8.00 (0.315)
Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%
Soft Check ValvesSoft Check ValvesSoft Check ValvesSoft Check Valves Low pressure check valves are designed for liquid and gas flow control in chemical, industrial and oil & gas fields. Ball Check ValvesBall Check ValvesBall Check ValvesBall Check Valves All SAMI INSTRUMENTS ball check valves have a long endurance and may also be employed with high temperatures. Features: Available in a variety of body styles, our valves are suitable for manual operation in temperature ranging from -73°C to 315°C ( from –100°F to 600°F ) . SAMI INSTRUMENTS low pressure check valves are available in various tubing sizes to satisfy different requirements: • Pressure: 15,000 psi ( 1034 bar ) . • Connections from 1/4 ” to 1/2” NPT. • Non rotating stem prevents galling and scoring. • Stem sleeve and packing gland materials have been selected to achieve extended thread cycles and reduced handle
torque. • Standard materials of construction include 316 L cold-worked stainless steel and glass-filled PTFE. • Standard O-ring material: NBR 90 Sh A
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch )
ORIFICE ORIFICE ORIFICE ORIFICE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S15F02T11S15F02T11S15F02T11S15F02T11 1/4 ” NPT
79.0 (3.111)
22.23 (0.875)
22.23 (0.875)
3.20 (0.126)
S15F02T12S15F02T12S15F02T12S15F02T12 3/8 ”NPT
89.2 (3.511)
25.40 (1.000)
25.40 (1.000)
5.60 (0.220)
S15F02T13S15F02T13S15F02T13S15F02T13 1/2 ”NPT
106.8 (4.204)
32.00 (1.260)
32.00 (1.260)
8.00 (0.315)
Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%
Soft Check ValveSoft Check ValveSoft Check ValveSoft Check Valve
Ball Check ValveBall Check ValveBall Check ValveBall Check Valve
15
,00
0 p
si
Page 8
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Accessories 15kpsi
Street ElbowStreet ElbowStreet ElbowStreet Elbow
Street elbows and tees are available for all tubing connection sizes. Sami Instruments fittings are made of high tensile 316L Stainless Steel, unless otherwise specified.
Order code Order code Order code Order code In/In/In/In/OutOutOutOut
A mmA mmA mmA mm ( i nch )( i nch )( i nch )( i nch )
B mmB mmB mmB mm ( i nch )( i nch )( i nch )( i nch )
C mmC mmC mmC mm ( i nch )( i nch )( i nch )( i nch )
D mmD mmD mmD mm ( i nch )( i nch )( i nch )( i nch )
SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S15F17T11S15F17T11S15F17T11S15F17T11 1/4 ” NPT
38.1 (1.50)
38.1 (1.50)
28.6 (1.13)
25.4 (1.00)
19.05 (0.75)
5.500 (0.22)
S15F17T12S15F17T12S15F17T12S15F17T12 3/8 ”NPT
44.45 (1.75)
38.1 (1.50)
31.75 (1.25)
25.4 (1.00)
25.4 (1.00)
7.500 (0.30)
S15F17T13S15F17T13S15F17T13S15F17T13 1/2 ”NPT
57.15 (2.25)
44.45 (1.75)
41 (1.61)
31.75 (1.25)
31.75 (1.25)
9.000 (0.35)
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S15F20T11S15F20T11S15F20T11S15F20T11 1/4 ” NPT
50.8 (2.00)
38.1 (1.50)
28.6 (1.13)
25.4 (1.00)
19.05 (0.75)
5.500 (0.22)
S15F20T12S15F20T12S15F20T12S15F20T12 3/8 ”NPT
63.5 (2.50)
38.1 (1.50)
38.1 (1.50)
25.4 (1.00)
25.4 (1.00)
7.500 (0.30)
S15F20T13S15F20T13S15F20T13S15F20T13 1/2 ”NPT
76.2 (3.00)
44.45 (1.75)
41 (1.61)
31.75 (1.25)
31.75 (1.25)
9.000 (0.35)
Street TeeStreet TeeStreet TeeStreet Tee
15
,00
0 p
si
Page 9
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Notes
Page 10
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Valve Series Valve Series Valve Series Valve Series
S20S20S20S20 20,000 p.s.i.
S30S30S30S30 30,000 p.s.i.
S60S60S60S60 60,000 p.s.i.
Valve SeriesValve SeriesValve SeriesValve Series Body PatternBody PatternBody PatternBody Pattern In/OutIn/OutIn/OutIn/Out
S20S20S20S20 V01V01V01V01 T01T01T01T01
Body PatternBody PatternBody PatternBody Pattern
V01V01V01V01 Two way straight valve
V02V02V02V02 Two way angle valve
V03V03V03V03 Three way valve - Two Pressure Connections
V04V04V04V04 Three way valve - One Pressure Connection
F01F01F01F01 Soft Check Valve
F02F02F02F02 Ball Check Valve
F04F04F04F04 Elbow
F05F05F05F05 Tee
F06F06F06F06 Cross
F08F08F08F08 Union Coupling
F09F09F09F09 Bulkhead Coupling
F10F10F10F10 Cap
F11F11F11F11 Plug
F12F12F12F12 Collar
F13F13F13F13 Gland
F14F14F14F14 Anti-Vibration Gland
In/OutIn/OutIn/OutIn/Out
T01T01T01T01 1/4” O.D.
T02T02T02T02 3/8” O.D.
T03T03T03T03 9/16” O.D.
T04T04T04T04 3/4” O.D.
T05T05T05T05 1” O.D.
Ordering Information Ordering Information Ordering Information Ordering Information ---- Medium/High Pressure Valves Medium/High Pressure Valves Medium/High Pressure Valves Medium/High Pressure Valves ---- 20/30/60 kpsi20/30/60 kpsi20/30/60 kpsi20/30/60 kpsi Ordering information
20
KP
SI - O
RD
ER
ING
INF
OR
MA
TIO
N
Page 11
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Ordering Information Ordering Information Ordering Information Ordering Information ---- Medium Pressure Valves Medium Pressure Valves Medium Pressure Valves Medium Pressure Valves ---- 20,000 psi20,000 psi20,000 psi20,000 psi Needle valves 20 kpsi 2
0,0
00
psi SAMI INSTRUMENTS medium pressure valves are designed for liquid and gas flow control.
Available in a variety of body styles, our valves are suitable for manual operation in temperature ranging from -73°C to 315°C ( from –100°F to 600°F ) . SAMI INSTRUMENTS medium pressure valves are available in various tubing sizes to satisfy different requirements: • Pressure: 20,000 psi ( 1379 bar ) • Connections from 1/4 ” to 1 ” coned and threaded tube • Non rotating stem prevents galling and scoring. • Stem sleeve and packing gland materials have been selected to achieve extended thread cycles and reduced
handle torque. • Standard materials of construction include 316 L cold-worked stainless steel and glass-filled PTFE.
Page 12
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 20kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) E mmE mmE mmE mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) J mm J mm J mm J mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S20V01T01S20V01T01S20V01T01S20V01T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
50.80 (2.00)
41.28 (1.63)
30.16 (1.19)
122.90 (4.84)
80.00 (3.15)
6.00 (0.24)
9.40 (0.37)
16.00 (0.63)
9.22 (0.36)
19.05 (0.75)
3.50 (0.13)
S20V01T02S20V01T02S20V01T02S20V01T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
50.80 (2.00)
41.28 (1.63)
30.16 (1.19)
126.06 (4.96)
80.00 (3.15)
6.00 (0.24)
9.40 (0.37)
16.00 (0.63)
12.78 (0.50)
19.05 (0.75)
5.50 (0.22)
S20V01T03S20V01T03S20V01T03S20V01T03 9/16 ”O.D.
63.50 (2.50)
31.75 (1.25)
70.00 (2.76)
57.30 (2.26)
41.43 (1.63)
160.20 (6.31)
100.00 (3.94)
9.00 (0.35)
9.40 (0.37)
17.50 (0.69)
14.12 (0.56)
25.40 (1.00)
8.00 (0.31)
S20V01T05S20V01T05S20V01T05S20V01T05 1 ”
O.D. 104.78 (4.13)
52.39 (2.06)
117.20 (4.61)
95.00 (3.74)
71.19 (2.80)
251.50 (9.90)
260.00 (10.24
14.00 (0.55)
17.40 (0.69)
35.00 (1.38)
18.30 (0.72)
44.45 (1.75)
14.30 (0.56)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Two Way Straight Needle Valves Two Way Straight Needle Valves Two Way Straight Needle Valves Two Way Straight Needle Valves ---- 20,000 psi20,000 psi20,000 psi20,000 psi
20
,00
0 p
si
Page 13
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 20kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) E mmE mmE mmE mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) J mmJ mmJ mmJ mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S20V02T01S20V02T01S20V02T01S20V02T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
61.90 (2.44)
30.16 (1.19)
134.00 (5.28)
80.00 (3.15)
6.00 (0.24)
9.40 (0.37)
16.00 (0.63)
9.22 (0.36)
19.05 (0.75)
3.50 (0.13)
S20V02T02S20V02T02S20V02T02S20V02T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
61.90 (2.44)
30.16 (1.19)
134.00 (5.28)
80.00 (3.15)
8.00 (0.24)
9.40 (0.37)
16.00 (0.63)
12.78 (0.50)
19.05 (0.75)
5.50 (0.22)
S20V02T03S20V02T03S20V02T03S20V02T03 9/16 ”O.D.
63.50 (2.50)
31.75 (1.25)
85.73 (3.38)
41.43 (1.63)
175.93 (6.93)
100.00 (3.94)
9.00 (0.35)
9.40 (0.37)
17.50 (0.69)
14.12 (0.56)
25.40 (1.00)
8.00 (0.31)
S20V02T05S20V02T05S20V02T05S20V02T05 1 ”
O.D. 104.78 (4.13)
52.39 (2.06)
130.18 (5.13)
71.19 (2.80)
256.18 (10.09)
260.00 (10.24)
14.00 (0.55)
17.40 (0.55)
35.00 (1.38)
18.30 (0.72)
44.45 (1.75)
14.30 (0.56)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Two Way Angle Needle Valves Two Way Angle Needle Valves Two Way Angle Needle Valves Two Way Angle Needle Valves ---- 20,000 psi20,000 psi20,000 psi20,000 psi
20
,00
0 p
si
Page 14
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 20kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) J mmJ mmJ mmJ mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
ORIFICE ORIFICE ORIFICE ORIFICE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S20V04T01S20V04T01S20V04T01S20V04T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
53.00 (2.09)
124.20 (4.89)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
14.63 (0.58)
25.40 (1.00)
2.40 (0.09)
S20V04T02S20V04T02S20V04T02S20V04T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
57.00 (2.24)
128.20 (5.05)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
18.68 (0.74)
25.40 (1.00)
3.20 (0.13)
S20V04T03S20V04T03S20V04T03S20V04T03 9/16 ”O.D.
66.68 (2.63)
33.34 (1.31)
62.00 (2.44)
133.20 (5.24)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
26.93 (1.06)
38.10 (1.50)
3.20 (0.13)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Three Way Needle Valves Three Way Needle Valves Three Way Needle Valves Three Way Needle Valves ---- One Pressure Connection One Pressure Connection One Pressure Connection One Pressure Connection ---- 20,000 psi20,000 psi20,000 psi20,000 psi
20
,00
0 p
si
Page 15
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Soft Check ValvesSoft Check ValvesSoft Check ValvesSoft Check Valves Medium pressure check valves are designed for liquid and gas flow control in chemical, industrial and oil & gas fields. Ball Check ValvesBall Check ValvesBall Check ValvesBall Check Valves All SAMI INSTRUMENTS ball check valves have a long endurance and may also be employed with high temperatures. Features:Features:Features:Features: Available in a variety of body styles, our valves are suitable for manual operation in temperature ranging from -73°C to 315°C ( from –100°F to 600°F ) . SAMI INSTRUMENTS medium pressure check valves are available in various tubing sizes to satisfy different requirements: • Pressure: 20,000 psi ( 1379 bar ) . • Connections from 1/4 ” to 9/16 ” O.D. • Non rotating stem prevents galling and scoring. • Stem sleeve and packing gland materials have been selected to achieve extended thread cycles and reduced
handle torque. • Standard materials of construction include 316 L cold-worked stainless steel and glass-filled PTFE. • Standard O-ring material: NBR 90 Sh A
Soft Check Valves Soft Check Valves Soft Check Valves Soft Check Valves
Check Valves 20kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch )
ORIFICE ORIFICE ORIFICE ORIFICE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S20F01T01S20F01T01S20F01T01S20F01T01 1/4 ” O.D.
73.0 (2.875)
22.23 (0.875)
22.23 (0.875)
2.80 (0.110)
S20F01T02S20F01T02S20F01T02S20F01T02 3/8 ”O.D.
84.6 (3.330)
25.40 (1.000)
25.40 (1.000)
5.20 (0.205)
S20F01T03S20F01T03S20F01T03S20F01T03 9/16 ” O.D.
114.3 (4.499)
32.00 (1.260)
32.00 (1.260)
8.00 (0.315)
Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%
Ball Check Valves Ball Check Valves Ball Check Valves Ball Check Valves Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out
A mmA mmA mmA mm ( i nch )( i nch )( i nch )( i nch )
B mmB mmB mmB mm ( i nch )( i nch )( i nch )( i nch )
C mmC mmC mmC mm ( i nch )( i nch )( i nch )( i nch )
ORIFICE ORIFICE ORIFICE ORIFICE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S20F02T01S20F02T01S20F02T01S20F02T01 1/4 ” O.D.
73.0 (2.875)
22.23 (0.875)
22.23 (0.875)
2.80 (0.110)
S20F02T02S20F02T02S20F02T02S20F02T02 3/8 ”O.D.
84.6 (3.330)
25.40 (1.000)
25.40 (1.000)
5.20 (0.205)
S20F02T03S20F02T03S20F02T03S20F02T03 9/16 ”O.D.
114.3 (4.499)
32.00 (1.260)
32.00 (1.260)
8.00 (0.315)
Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%
20
,00
0 p
si
Page 16
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Accessories 20kpsi
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm F mmF mmF mmF mm J mmJ mmJ mmJ mm H mmH mmH mmH mm SP mmSP mmSP mmSP mm HEX HEX HEX HEX mmmmmmmm
S20F04T01S20F04T01S20F04T01S20F04T01 1/4 ”O.D.
28.45 38.10 19.05 19.05 12.50 12.50 6.00 9.22 15.88 12.70
S20F04T02S20F04T02S20F04T02S20F04T02 3/8 ”O.D.
35.05 50.80 25.40 25.40 16.00 16.00 7.00 12.78 19.05 15.87
S20F04T03S20F04T03S20F04T03S20F04T03 9/16 ”O.D.
44.45 63.50 31.75 31.75 21.00 21.00 9.00 14.12 25.40 22.20
S20F04T04S20F04T04S20F04T04S20F04T04 3/4 ”O.D.
57.15 76.20 38.10 38.10 25.40 25.40 11.00 15.75 34.93 30.16
S20F04T05S20F04T05S20F04T05S20F04T05 1 ”
O.D. 76.20 104.78 52.40 52.39 35.00 35.00 14.00 18.30 44.45 34.93
In/OutIn/OutIn/OutIn/Out
A complete line of crosses, elbows and tees is available for all tubing connection sizes. Sami Instruments fittings are made of high tensile 316L Stainless Steel, unless otherwise specified.
ElbowElbowElbowElbow
20
,00
0 p
si
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ----
Page 17
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm F mmF mmF mmF mm F2 mmF2 mmF2 mmF2 mm J mmJ mmJ mmJ mm H mmH mmH mmH mm SP mmSP mmSP mmSP mm HEX HEX HEX HEX mmmmmmmm
S20F05T01S20F05T01S20F05T01S20F05T01 1/4 ”O.D.
28.45 38.10 19.05 19.05 12.50 12.50 25.00 6.00 9.22 15.88 12.70
S20F05T02S20F05T02S20F05T02S20F05T02 3/8 ”O.D.
35.05 50.80 25.40 25.40 16.00 16.00 32.00 7.00 12.78 19.05 15.87
S20F05T03S20F05T03S20F05T03S20F05T03 9/16 ”O.D.
44.45 63.50 31.75 31.75 21.00 21.00 42.00 9.00 14.12 25.40 22.20
S20F05T04S20F05T04S20F05T04S20F05T04 3/4 ”O.D.
57.15 76.20 38.10 38.10 25.40 25.40 50.80 11.00 15.75 34.93 30.16
S20F05T05S20F05T05S20F05T05S20F05T05 1 ”O.D.
76.20 104.78 52.40 52.39 35.00 35.00 70.00 14.00 18.30 44.45 34.93
In/OutIn/OutIn/OutIn/Out
TeeTeeTeeTee CrossCrossCrossCross
Tee
Tee
Tee
Tee
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm F mmF mmF mmF mm F2 mmF2 mmF2 mmF2 mm J mmJ mmJ mmJ mm H mmH mmH mmH mm SP mmSP mmSP mmSP mm HEX HEX HEX HEX mmmmmmmm
S20F06T01S20F06T01S20F06T01S20F06T01 1/4 ”O.D.
38.10 38.10 19.05 19.05 12.50 12.50 25.00 6.00 9.22 15.88 12.70
S20F06T02S20F06T02S20F06T02S20F06T02 3/8 ”O.D.
50.80 50.80 25.40 25.40 16.00 16.00 32.00 7.00 12.78 19.05 15.87
S20F06T03S20F06T03S20F06T03S20F06T03 9/16 ”O.D.
63.50 63.50 31.75 31.75 21.00 21.00 42.00 9.00 14.12 25.40 22.20
S20F06T04S20F06T04S20F06T04S20F06T04 3/4 ”O.D.
76.20 76.20 38.10 38.10 25.40 25.40 50.80 11.00 15.75 34.93 30.16
S20F06T05S20F06T05S20F06T05S20F06T05 1 ”
O.D. 104.78 104.78 52.39 52.39 35.00 35.00 70.00 14.00 18.30 44.45 34.93
In/OutIn/OutIn/OutIn/Out
Cros
sCr
oss
Cros
sCr
oss
20
,00
0 p
si
---- 2010201020102010
Accessories 20kpsi
Page 18
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm
S20F08T01S20F08T01S20F08T01S20F08T01 1/4 ”O.D.
15.87 41.00 9.22 12.70
S20F08T02S20F08T02S20F08T02S20F08T02 3/8 ”O.D.
19.05 45.00 12.78 15.87
S20F08T03S20F08T03S20F08T03S20F08T03 9/16 ”O.D.
25.40 54.00 14.12 22.20
S20F08T04S20F08T04S20F08T04S20F08T04 3/4 ”O.D.
34.92 63.50 15.75 30.16
S20F08T05S20F08T05S20F08T05S20F08T05 1 ” O.D. 44.45 89.00 18.30 34.93
In/OutIn/OutIn/OutIn/Out
Union CouplingUnion CouplingUnion CouplingUnion Coupling
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm F mmF mmF mmF mm J mmJ mmJ mmJ mm
S20F09T01S20F09T01S20F09T01S20F09T01 1/4 ”O.D.
20.00 48.00 13.50 25.40 9.22 12.70 10.00
S20F09T02S20F09T02S20F09T02S20F09T02 3/8 ”O.D.
23.00 55.00 16.00 30.16 12.78 15.87 10.00
S20F09T03S20F09T03S20F09T03S20F09T03 9/16 ”O.D.
30.00 64.00 19.00 34.90 14.12 22.20 10.00
In/OutIn/OutIn/OutIn/Out
Bulkhead CouplingBulkhead CouplingBulkhead CouplingBulkhead Coupling
20
,00
0 p
si
Accessories 20kpsi
Page 19
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Order code Order code Order code Order code A HEX A HEX A HEX A HEX
mmmmmmmm B mmB mmB mmB mm
S20F10T01S20F10T01S20F10T01S20F10T01 1/4 ”O.D.
15.87 21
S20F10T02S20F10T02S20F10T02S20F10T02 3/8 ”O.D.
19.05 29
S20F10T03S20F10T03S20F10T03S20F10T03 9/16 ”O.D.
25.4 35
S20F10T04S20F10T04S20F10T04S20F10T04 3/4 ”O.D.
34.92 44.5
S20F10T05S20F10T05S20F10T05S20F10T05 1 ”
O.D. 44.45 57
In/OutIn/OutIn/OutIn/Out CapCapCapCap
PlugPlugPlugPlug
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm
S20F11T01S20F11T01S20F11T01S20F11T01 1/4 ”O.D.
6.35 9.5 3.6 23.5 8.7
S20F11T02S20F11T02S20F11T02S20F11T02 3/8 ”O.D.
9.5 12.4 6.35 30.5 11.1
S20F11T03S20F11T03S20F11T03S20F11T03 9/16”
O.D.
14.3 18.3 10.3 40 12.7
S20F11T04S20F11T04S20F11T04S20F11T04 3/4 ”O.D.
18.9 23.8 14.3 42 15.4
S20F11T05S20F11T05S20F11T05S20F11T05 1 ”
O.D. 25.2 31.8 18.3 56.5 20.4
In/In/In/In/OutOutOutOut
AntiAntiAntiAnti----vibration Glandvibration Glandvibration Glandvibration Gland
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm CCCC
S20F14T01S20F14T01S20F14T01S20F14T01 1/4 ”O.D.
15.88 12.70 32.01
S20F14T02S20F14T02S20F14T02S20F14T02 3/8 ”O.D.
19.05 15.88 37.21
S20F14T03S20F14T03S20F14T03S20F14T03 9/16 ”O.D.
25.40 22.20 47.19
In/OutIn/OutIn/OutIn/Out
20
,00
0 p
si
Accessories 20kpsi
Page 20
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm CCCC
S20F12T01S20F12T01S20F12T01S20F12T01 1/4 ”O.D.
9.500 5.600 1/4-28 UNF-2B
left
S20F12T02S20F12T02S20F12T02S20F12T02 3/8 ”O.D.
12.400 6.300 3/8-24 UNF-2B
left
S20F12T03S20F12T03S20F12T03S20F12T03 9/16 ”O.D.
18.400 8.000 9/16-18 UNF-2B
left
S20F12T04S20F12T04S20F12T04S20F12T04 3/4 ”O.D.
23.800 9.600 3/4-16 UNF-2B
left
S20F12T05S20F12T05S20F12T05S20F12T05 1 ”O.D.
31.800 12.900 1-14 UNF-2B left
In/OutIn/OutIn/OutIn/Out
CollarCollarCollarCollar
GlandGlandGlandGland
Order code Order code Order code Order code A mmA mmA mmA mm BBBB HEX mmHEX mmHEX mmHEX mm
S20F13T01S20F13T01S20F13T01S20F13T01 1/4 ”O.D.
14.5 7/16-20 UNF-2A 12.7
S20F13T02S20F13T02S20F13T02S20F13T02 3/8 ”O.D.
19 9/16-18 UNF-2A 15.87
S20F13T03S20F13T03S20F13T03S20F13T03 9/16 ”O.D.
22.5 13/16-16 UN-2A 22.2
S20F13T04S20F13T04S20F13T04S20F13T04 3/4 ”O.D.
25.5 3/4-14 NPSM 30.16
S20F13T05S20F13T05S20F13T05S20F13T05 1 ”O.D.
35.1 1 3/8-12 UNF-2A 34.93
In/OutIn/OutIn/OutIn/Out
20
,00
0 p
si
Accessories 20kpsi
Page 21
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Notes
Page 22
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Section Drawing Section Drawing Section Drawing Section Drawing ---- Medium Pressure Needle Valves Medium Pressure Needle Valves Medium Pressure Needle Valves Medium Pressure Needle Valves ---- 30,000 psi30,000 psi30,000 psi30,000 psi Needle Valves 30kpsi
30
,00
0 p
si
SAMI INSTRUMENTS medium pressure valves are designed for liquid and gas flow control. Available in a variety of body styles, the valves are suitable for manual operation in temperature ranging from -73°C to 315°C ( from –100°F to 600°F ) . SAMI INSTRUMENTS high pressure valves are available in various tubing sizes to satisfy different requirements. • Pressure 30,000 psi ( 2068 bar ) . • Connections from 1/4 ” to 9/16 ” coned and threaded tube. • Non rotating stem prevents galling and scoring. • Stem sleeve and packing gland materials have been selected to achieve extended thread cycles and reduced
handle torque. • Standard materials of construction include 316 L cold-worked stainless steel and glass-filled PTFE.
Page 23
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 30kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) E mmE mmE mmE mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) J mm J mm J mm J mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S30V01T01S30V01T01S30V01T01S30V01T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
53.00 (2.09)
39.50 (1.56)
30.00 (1.18)
124.20 (4.89)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
14.63 (0.58)
25.40 (1.00)
2.40 (0.09)
S30V01T02S30V01T02S30V01T02S30V01T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
53.00 (2.09)
39.50 (1.56)
30.00 (1.18)
124.20 (4.89)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
18.68 (0.74)
25.40 (1.00)
3.20 (0.13)
S30V01T03S30V01T03S30V01T03S30V01T03 9/16 ”O.D.
66.68 (2.63)
33.34 (1.31)
60.00 (2.36)
40.00 (1.57)
29.00 (1.14)
131.20 (5.17)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
26.93 (1.06)
38.10 (1.50)
3.20 (0.13)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Two Way Straight Needle Valves Two Way Straight Needle Valves Two Way Straight Needle Valves Two Way Straight Needle Valves ---- 30,000 psi30,000 psi30,000 psi30,000 psi
30
,00
0 p
si
Page 24
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 30kpsi
Two Way Angle Needle Valves Two Way Angle Needle Valves Two Way Angle Needle Valves Two Way Angle Needle Valves ---- 30,000 psi30,000 psi30,000 psi30,000 psi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) J mm J mm J mm J mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S30V02T01S30V02T01S30V02T01S30V02T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
53.00 (2.09)
30.00 (1.18)
124.20 (4.89)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
14.63 (0.58)
25.40 (1.00)
2.40 (0.09)
S30V02T02S30V02T02S30V02T02S30V02T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
57.00 (2.24)
30.00 (1.18)
128.20 (5.05)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
18.68 (0.74)
25.40 (1.00)
3.20 (0.13)
S30V02T03S30V02T03S30V02T03S30V02T03 9/16 ”O.D.
66.68 (2.63)
33.34 (1.31)
62.00 (2.44)
29.00 (1.14)
133.20 (5.24)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
26.93 (1.06)
38.10 (1.50)
3.20 (0.13)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
30
,00
0 p
si
Page 25
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 30kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) J mmJ mmJ mmJ mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S30V04T01S30V04T01S30V04T01S30V04T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
53.00 (2.09)
30.00 (1.18)
124.20 (4.89)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
14.63 (0.58)
25.40 (1.00)
2.40 (0.09)
S30V04T02S30V04T02S30V04T02S30V04T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
57.00 (2.24)
30.00 (1.18)
128.20 (5.05)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
18.68 (0.74)
25.40 (1.00)
3.20 (0.13)
S30V04T03S30V04T03S30V04T03S30V04T03 9/16 ”O.D.
66.68 (2.63)
33.34 (1.31)
62.00 (2.44)
29.00 (1.14)
133.20 (5.24)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
26.93 (1.06)
38.10 (1.50)
3.20 (0.13)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Three Way Needle Valves Three Way Needle Valves Three Way Needle Valves Three Way Needle Valves ---- One Pressure Connection One Pressure Connection One Pressure Connection One Pressure Connection ---- 30,000 psi30,000 psi30,000 psi30,000 psi
30
,00
0 p
si
Page 26
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Notes
Page 27
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Section Drawing Section Drawing Section Drawing Section Drawing ---- High Pressure Needle Valves High Pressure Needle Valves High Pressure Needle Valves High Pressure Needle Valves ---- 60,000 psi60,000 psi60,000 psi60,000 psi Needle Valves 60kpsi
SAMI INSTRUMENTS high pressure valves are designed for liquid and gas flow control. Available in a variety of body styles, the valves are suitable for manual operation in temperature ranging from -73°C to 315°C ( from –100°F to 600°F ) . SAMI INSTRUMENTS high pressure valves are available in various tubing sizes to satisfy different requirements. • Pressure 60,000 psi ( 4139 bar ) . • Connections from 1/4 ” to 9/16 ” coned and threaded tube. • Non rotating stem prevents galling and scoring. • Stem sleeve and packing gland materials have been selected to achieve extended thread cycles and reduced
handle torque. • Standard materials of construction include 316 L cold-worked stainless steel and glass-filled PTFE.
60
,00
0 p
si
Page 28
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 60kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) E mmE mmE mmE mm
( i nch )( i nch )( i nch )( i nch ) F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch ) G mmG mmG mmG mm
( i nch )( i nch )( i nch )( i nch ) H mmH mmH mmH mm
( i nch )( i nch )( i nch )( i nch ) L mmL mmL mmL mm
( i nch )( i nch )( i nch )( i nch ) M mmM mmM mmM mm
( i nch )( i nch )( i nch )( i nch ) J mm J mm J mm J mm
( i nch )( i nch )( i nch )( i nch ) SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S60V01T01S60V01T01S60V01T01S60V01T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
53.00 (2.09)
42.00 (1.65)
32.40 (1.28)
124.00 (4.88)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
14.63 (0.58)
25.40 (1.00)
1.60(0.06)
S60V01T02S60V01T02S60V01T02S60V01T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
57.00 (2.24)
42.90 (1.69)
33.30 (1.31)
128.00 (5.04)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
18.68 (0.74)
25.40 (1.00)
1.60 (0.06)
S60V01T03S60V01T03S60V01T03S60V01T03 9/16 ”O.D.
66.68 (2.63)
33.34 (1.31)
63.50 (2.50)
45.50 (1.79)
33.30 (1.31)
134.50 (5.30)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
26.93 (1.06)
38.10 (1.50)
2.00 (0.06)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Packing in nylon/leatherPacking in nylon/leatherPacking in nylon/leatherPacking in nylon/leather
Two Way Straight Needle Valves Two Way Straight Needle Valves Two Way Straight Needle Valves Two Way Straight Needle Valves ---- 60,000 psi60,000 psi60,000 psi60,000 psi
60
,00
0 p
si
Page 29
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 60kpsi
Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch )
C mmC mmC mmC mm ( i nch( i nch( i nch( i nch
))))
D mmD mmD mmD mm ( i nch )( i nch )( i nch )( i nch )
E mmE mmE mmE mm ( i nch )( i nch )( i nch )( i nch )
F* mmF* mmF* mmF* mm ( i nch )( i nch )( i nch )( i nch )
G mmG mmG mmG mm ( i nch )( i nch )( i nch )( i nch )
H mmH mmH mmH mm ( i nch )( i nch )( i nch )( i nch )
L mmL mmL mmL mm ( i nch )( i nch )( i nch )( i nch )
M mmM mmM mmM mm ( i nch )( i nch )( i nch )( i nch )
J mm J mm J mm J mm ( i nch )( i nch )( i nch )( i nch )
SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S60V02T01S60V02T01S60V02T01S60V02T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
60.00 (2.36)
42.00 (1.65)
32.40 (1.28)
131.00 (5.16)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
14.63 (0.58)
25.40 (1.00)
1.60(0.06)
S60V02T02S60V02T02S60V02T02S60V02T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
66.00 (2.60)
42.90 (1.69)
33.30 (1.31)
137.00 (5.39)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
18.68 (0.74)
25.40 (1.00)
1.60 (0.06)
S60V02T03S60V02T03S60V02T03S60V02T03 9/16 ”O.D.
66.68 (2.63)
33.34 (1.31)
71.00 (2.80)
45.50 (1.79)
33.30 (1.31)
142.50 (5.59)
80.00 (3.15)
7.00 (0.28)
10.00 (0.39)
17.50 (0.69)
26.93 (1.06)
38.10 (1.50)
2.00 (0.06)
*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position*F dimension is with stem in open position
Packing in nylon/leatherPacking in nylon/leatherPacking in nylon/leatherPacking in nylon/leather
Two Way Angle Needle Valves Two Way Angle Needle Valves Two Way Angle Needle Valves Two Way Angle Needle Valves ---- 60,000 psi60,000 psi60,000 psi60,000 psi
60
,00
0 p
si
Page 30
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Needle Valves 60kpsi
Order code Order code Order code Order code A mmA mmA mmA mm
( i nch )( i nch )( i nch )( i nch ) B mmB mmB mmB mm
( i nch )( i nch )( i nch )( i nch ) C mmC mmC mmC mm
( i nch )( i nch )( i nch )( i nch ) D mmD mmD mmD mm
( i nch )( i nch )( i nch )( i nch ) E mmE mmE mmE mm
( i nch )( i nch )( i nch )( i nch )
S60V03T01S60V03T01S60V03T01S60V03T01 1/4 ” O.D.
50.80 (2.00)
25.40 (1.00)
60.00 (2.36)
42.00 (1.65)
32.40 (1.28)
S60V03T02S60V03T02S60V03T02S60V03T02 3/8 ”O.D.
50.80 (2.00)
25.40 (1.00)
73.00 (2.87)
42.90 (1.69)
33.30 (1.31)
S60V03T03S60V03T03S60V03T03S60V03T03 9/16 ”O.D.
66.68 (2.63)
33.34 (1.31)
83.00 (3.27)
45.50 (1.79)
33.30 (1.31)
In/OutIn/OutIn/OutIn/Out F* mmF* mmF* mmF* mm
( i nch )( i nch )( i nch )( i nch )
131.00 (5.16)
144.00 (5.67)
154.00 (6.06)
G mmG mmG mmG mm ( i nch )( i nch )( i nch )( i nch )
80.00 (3.15)
80.00 (3.15)
80.00 (3.15)
H mmH mmH mmH mm ( i nch )( i nch )( i nch )( i nch )
7.00 (0.28)
7.00 (0.28)
7.00 (0.28)
L mmL mmL mmL mm ( i nch )( i nch )( i nch )( i nch )
10.00 (0.39)
10.00 (0.39)
10.00 (0.39)
M mmM mmM mmM mm ( i nch )( i nch )( i nch )( i nch )
17.50 (0.69)
17.50 (0.69)
17.50 (0.69)
J mm J mm J mm J mm ( i nch )( i nch )( i nch )( i nch )
14.63 (0.58)
18.68 (0.74)
26.93 (1.06)
SP mmSP mmSP mmSP mm ( i nch )( i nch )( i nch )( i nch )
25.40 (1.00)
25.40 (1.00)
38.10 (1.50)
Orifice Orifice Orifice Orifice mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
1.60(0.06)
1.60 (0.06)
2.00 (0.06)
Three Way Needle Valves Three Way Needle Valves Three Way Needle Valves Three Way Needle Valves ---- Two pressure connections Two pressure connections Two pressure connections Two pressure connections ---- 60,000 psi60,000 psi60,000 psi60,000 psi
60
,00
0 p
si
Page 31
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Check Valves 60kpsi
Soft Check Valves Soft Check Valves Soft Check Valves Soft Check Valves Order code Order code Order code Order code In/OutIn/OutIn/OutIn/Out
A mmA mmA mmA mm ( i nch )( i nch )( i nch )( i nch )
B mmB mmB mmB mm ( i nch )( i nch )( i nch )( i nch )
C mmC mmC mmC mm ( i nch )( i nch )( i nch )( i nch )
ORIFICE ORIFICE ORIFICE ORIFICE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S60F01T01S60F01T01S60F01T01S60F01T01 1/4 ” O.D.
85.51 (3.367)
30.16 (1.187)
20.64 (0.813)
2.40 (0.094)
S60F01T02S60F01T02S60F01T02S60F01T02 3/8 ”O.D.
95.41 (3.756)
30.16 (1.187)
25.40 (1.000)
3.20 (0.126)
S60F01T03S60F01T03S60F01T03S60F01T03 9/16 ” O.D.
117.52 (4.627)
38.10 (1.500)
34.93 (1.375)
4.80 (0.189)
Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%
Soft Check ValvesSoft Check ValvesSoft Check ValvesSoft Check Valves High pressure check valves are designed for liquid and gas flow control in chemical, industrial and oil & gas fields. Ball Check ValvesBall Check ValvesBall Check ValvesBall Check Valves All SAMI INSTRUMENTS ball check valves have a long endurance and may also be employed with high temperatures. Features:Features:Features:Features: Available in a variety of body styles, our valves are suitable for manual operation in temperature ranging from -73°C to 315°C ( from –100°F to 600°F ) . SAMI INSTRUMENTS medium pressure check valves are available in various tubing sizes to satisfy different requirements: • Pressure: 60,000 psi ( 4139 bar ) . • Connections from 1/4 ” to 9/16 ” O.D. • Non rotating stem prevents galling and scoring. • Stem sleeve and packing gland materials have been selected to achieve extended thread cycles and reduced
handle torque. • Standard materials of construction include 316 L cold-worked stainless steel and glass-filled PTFE. • Standard O-ring material: NBR 90 Sh A
Ball Check Valves Ball Check Valves Ball Check Valves Ball Check Valves Order code Order code Order code Order code
A mmA mmA mmA mm ( i nch )( i nch )( i nch )( i nch )
B mmB mmB mmB mm ( i nch )( i nch )( i nch )( i nch )
C mmC mmC mmC mm ( i nch )( i nch )( i nch )( i nch )
ORIFICE ORIFICE ORIFICE ORIFICE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
S60F02T01S60F02T01S60F02T01S60F02T01 1/4 ” O.D.
85.5 (3.367)
30.16 (1.187)
20.64 (0.813)
2.40 (0.094)
S60F02T02S60F02T02S60F02T02S60F02T02 3/8 ”O.D.
95.4(3.756)
30.16 (1.187)
25.40 (1.000)
3.20 (0.126)
S60F02T03S60F02T03S60F02T03S60F02T03 9/16 ” O.D.
117.5(4.627)
38.10 (1.500)
34.93 (1.375)
4.80 (0.189)
Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%Standard cracking pressure: 20 p.s.i. ( 1.38 bar ) ±30%
In/OutIn/OutIn/OutIn/Out
60
,00
0 p
si
Page 32
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm F mmF mmF mmF mm J mmJ mmJ mmJ mm H mmH mmH mmH mm SP mmSP mmSP mmSP mm HEX HEX HEX HEX mmmmmmmm
S60F04T01S60F04T01S60F04T01S60F04T01 1/4 ”O.D.
38.10 34.93 25.40 22.23 20.00 16.50 6.00 14.63 25.40 15.88
S60F04T02S60F04T02S60F04T02S60F04T02 3/8 ”O.D.
38.10 44.45 25.40 31.75 18.30 17.50 7.00 18.68 25.40 20.64
S60F04T03S60F04T03S60F04T03S60F04T03 9/16 ”O.D.
47.63 66.68 28.58 47.63 21.00 24.00 9.00 26.93 38.10 30.16
In/OutIn/OutIn/OutIn/Out
A complete line of crosses, elbows and tees is available for all tubing connection sizes. Sami Instruments fittings are made of high tensile 316L Stainless Steel, unless otherwise specified.
ElbowElbowElbowElbow
Accessories 60kpsi
60
,00
0 p
si
Page 33
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm F mmF mmF mmF mm F2 mmF2 mmF2 mmF2 mm J mmJ mmJ mmJ mm H mmH mmH mmH mm SP mmSP mmSP mmSP mm HEX HEX HEX HEX mmmmmmmm
S60F06T01S60F06T01S60F06T01S60F06T01 1/4 ”O.D.
38.10 50.80 19.05 25.40 13.00 16.50 33.00 6.00 14.63 25.40 15.88
S60F06T02S60F06T02S60F06T02S60F06T02 3/8 ”O.D.
50.80 53.98 25.40 26.99 17.50 17.50 35.00 7.00 18.68 25.40 20.64
S60F06T03S60F06T03S60F06T03S60F06T03 9/16 ”O.D.
66.68 69.85 33.34 34.93 24.00 24.00 48.00 9.00 26.93 38.10 30.16
In/OutIn/OutIn/OutIn/Out
CrossCrossCrossCross
TeeTeeTeeTee
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm F mmF mmF mmF mm F2 mmF2 mmF2 mmF2 mm J mmJ mmJ mmJ mm H mmH mmH mmH mm SP mmSP mmSP mmSP mm HEX HEX HEX HEX mmmmmmmm
S60F05T01S60F05T01S60F05T01S60F05T01 1/4 ”O.D.
34.93 50.80 22.23 25.40 16.50 16.50 33.00 6.00 14.63 25.40 15.88
S60F05T02S60F05T02S60F05T02S60F05T02 3/8 ”O.D.
39.69 50.80 26.99 25.40 17.50 17.50 35.00 7.00 18.68 25.40 20.64
S60F05T03S60F05T03S60F05T03S60F05T03 9/16 ”O.D.
53.98 66.68 34.93 33.34 24.00 24.00 48.00 9.00 26.93 38.10 30.16
In/OutIn/OutIn/OutIn/Out
Fittings 60kpsi
60
,00
0 p
si
Accessories 60kpsi
Page 34
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm
S60F08T01S60F08T01S60F08T01S60F08T01 1/4 ”O.D.
25.40 44.45 14.63 15.88
S60F08T02S60F08T02S60F08T02S60F08T02 3/8 ”O.D.
25.40 50.85 18.68 20.64
S60F08T03S60F08T03S60F08T03S60F08T03 9/16 ”O.D.
34.93 60.33 26.93 30.16
In/OutIn/OutIn/OutIn/Out
Union CouplingUnion CouplingUnion CouplingUnion Coupling
Bulkhead CouplingBulkhead CouplingBulkhead CouplingBulkhead Coupling
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm E mmE mmE mmE mm F mmF mmF mmF mm J mmJ mmJ mmJ mm
S60F09T01S60F09T01S60F09T01S60F09T01 1/4 ”O.D.
23.00 50.80 12.70 30.16 14.63 15.88 10.00
S60F09T02S60F09T02S60F09T02S60F09T02 3/8 ”O.D.
30.00 60.33 19.00 34.90 18.68 20.64 10.00
S60F09T03S60F09T03S60F09T03S60F09T03 9/16 ”O.D.
43.00 69.85 25.40 47.63 26.93 30.16 10.00
In/OutIn/OutIn/OutIn/Out
60
,00
0 p
si
Accessories 60kpsi
Page 35
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Cap 60kpsi
Order code Order code Order code Order code A HEX A HEX A HEX A HEX
mmmmmmmm B mmB mmB mmB mm
S60F10T01S60F10T01S60F10T01S60F10T01 1/4 ”O.D.
19.05 22.23
S60F10T02S60F10T02S60F10T02S60F10T02 3/8 ”O.D.
25.4 31.75
S60F10T03S60F10T03S60F10T03S60F10T03 9/16 ”O.D.
34.925 38.1
In/OutIn/OutIn/OutIn/Out
Fittings 60kpsi
CapCapCapCap
PlugPlugPlugPlug
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm C mmC mmC mmC mm D mmD mmD mmD mm
S60F11T01S60F11T01S60F11T01S60F11T01 1/4 ”O.D.
6.35 9.5 3.18 28
S60F11T02S60F11T02S60F11T02S60F11T02 3/8 ”O.D.
9.5 12.7 5.56 37
S60F11T03S60F11T03S60F11T03S60F11T03 9/16 ”O.D.
14.3 20.64 7.14 50
In/OutIn/OutIn/OutIn/Out
AntiAntiAntiAnti----Vibration GlandVibration GlandVibration GlandVibration Gland
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm
S60F14T01S60F14T01S60F14T01S60F14T01 1/4 ”O.D.
15.88 22.00
S60F14T02S60F14T02S60F14T02S60F14T02 3/8 ”O.D.
20.64 30.00
S60F14T03S60F14T03S60F14T03S60F14T03 9/16 ”O.D.
30.16 40.00
In/OutIn/OutIn/OutIn/Out
60
,00
0 p
si
Accessories 60kpsi
Page 36
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Order code Order code Order code Order code A mmA mmA mmA mm B mmB mmB mmB mm CCCC
S60F12T01S60F12T01S60F12T01S60F12T01 1/4 ”O.D.
9.500 9.500 1/4-28 UNF-2B
left
S60F12T02S60F12T02S60F12T02S60F12T02 3/8 ”O.D.
12.700 13.500 3/8-24 UNF-2B
left
S60F12T03S60F12T03S60F12T03S60F12T03 9/16 ”O.D.
20.640 15.800 9/16-18 UNF-2B
left
In/OutIn/OutIn/OutIn/Out
CollarCollarCollarCollar
GlandGlandGlandGland
Order code Order code Order code Order code A mmA mmA mmA mm BBBB HEX mmHEX mmHEX mmHEX mm
S60F13T01S60F13T01S60F13T01S60F13T01 1/4 ”O.D.
22 9/16-18 UNF-2A 15.88
S60F13T02S60F13T02S60F13T02S60F13T02 3/8 ”O.D.
30 3/4-16 UNF-2A 20.64
S60F13T03S60F13T03S60F13T03S60F13T03 9/16 ”O.D.
40 1 1/8-12 UN-2A 30.16
In/OutIn/OutIn/OutIn/Out
60
,00
0 p
si
Accessories 60kpsi
Page 37
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Notes
Page 38
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Ordering Information Ordering Information Ordering Information Ordering Information ---- LowLowLowLow----MediumMediumMediumMedium----High Pressure Ball Valves High Pressure Ball Valves High Pressure Ball Valves High Pressure Ball Valves
Ordering information
Valve Series Valve Series Valve Series Valve Series
B15B15B15B15 15,000 p.s.i.
B20B20B20B20 20,000 p.s.i.
Valve SeriesValve SeriesValve SeriesValve Series Body PatternBody PatternBody PatternBody Pattern In/OutIn/OutIn/OutIn/Out
B15B15B15B15 V01V01V01V01 T11T11T11T11
Body PatternBody PatternBody PatternBody Pattern
V01V01V01V01 Two way straight valve
In/OutIn/OutIn/OutIn/Out
T11T11T11T11 1/4” NPT
T12T12T12T12 3/8” NPT
T13T13T13T13 1/2” NPT
V01V01V01V01 1/4” M/P
V02V02V02V02 3/8” M/P
V03V03V03V03 9/16” M/P
BA
LL
VA
LV
ES
- OR
DE
RIN
G IN
FO
RM
AT
ION
Page 39
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Ball Valves 15kpsi
Features
• 316 cold-worked stainless steel body and side adapters • PEEK ball seals • Stem packings in glass-filled Teflon • Viton o-rings • Quick open and close thanks to quarter-turn operation • Flow indicating handle allows to indicate valve position
at a glance • Bi-directional flow capabilities. • Mounting:
Panel: 1.06" ( 26.0 mm ) dia 0.43" ( 11.0 mm ) max thickness
B15-Series Ball Valve
15,000 psi
SAMI INSTRUMENTS medium pressure valves are designed for liquid and gas flow control and are available in various tubing sizes to satisfy different requirements. Connections from 1/4 ” to 1/2” NPT-F.
Order code Order code Order code Order code
Connec-Connec-Connec-Connec-tionstionstionstions Inlet/Inlet/Inlet/Inlet/outletoutletoutletoutlet
A A A A mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
BBBB mmmmmmmm
( i nch ) ( i nch ) ( i nch ) ( i nch )
CCCC mmmmmmmm
( i nch ) ( i nch ) ( i nch ) ( i nch )
DDDD mmmmmmmm
( i nch ) ( i nch ) ( i nch ) ( i nch )
EEEE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
FFFF mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
GGGG mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
HHHH mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
I I I I mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
LLLL mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
MMMM mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
NNNN mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mm mm mm mm
( i nch )( i nch )( i nch )( i nch )
B15V01T11B15V01T11B15V01T11B15V01T11 1/4” NPT-F
50.5 (1.99)
45.5 (1.79)
25.4 (1) 32.8
(1.29) 10.9
(0.43) 19.05 (0.75)
7.1 (0.28)
1/4”-20 UNC
70 (2.75)
103.3 (4.07)
96 (3.78)
19.05 (0.75)
6.4 (0.25)
B15V01T12B15V01T12B15V01T12B15V01T12 3/8” NPT-F
50.5 (1.99)
45.5 (1.79)
25.4 (1) 32.8
(1.29) 10.9
(0.43) 19.05 (0.75)
7.1 (0.28)
1/4”-20 UNC
70 (2.75)
103.3 (4.07)
96 (3.78)
25.4 (1) 6.4
(0.25)
B15V01T13B15V01T13B15V01T13B15V01T13 1/2” NPT-F
76.2 (3) 53.45 (2.1)
34.9 (1.37)
36 (1.42)
10.9 (0.43)
19.05 (0.75)
7.1 (0.28)
1/4”-20 UNC
115 (4.53)
137.7 (5.42)
104 (4.09)
34.9 (1.375)
9.5 (0.374)
Specifications
• Pressure 15,000 Psi ( 1034 Bar ) • Positive sealing assured by pressure loaded seats • Maximum safety assured by blowout-proof stem and ball • Versatile installation thanks to wide choice of replaceable connections. • Minimum pressure drop assured by straight through flow path.
A
B
C
Ba
ll Va
lve
s
Page 40
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Ball Valves 20kpsi
Features
• 316 cold-worked stainless steel body and side adapters • PEEK ball seals • Stem packings in glass-filled Teflon • Viton o-rings • Quick open and close thanks to quarter-turn operation • Flow indicating handle allows to indicate valve position
at a glance • Bi-directional flow capabilities. • Mounting:
Panel: 1.06" ( 26.0 mm ) dia 0.43" ( 11.0 mm ) max thickness
B20-Series Ball Valve
20,000 psi
SAMI INSTRUMENTS high pressure valves are designed for liquid and gas flow control and are available in various tubing sizes to satisfy different requirements. Connections from 1/4 ” to 9/16 ” M/P.
Order code Order code Order code Order code
Connec-Connec-Connec-Connec-tionstionstionstions Inlet/Inlet/Inlet/Inlet/outletoutletoutletoutlet
A A A A mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
BBBB mmmmmmmm
( i nch ) ( i nch ) ( i nch ) ( i nch )
CCCC mmmmmmmm
( i nch ) ( i nch ) ( i nch ) ( i nch )
DDDD mmmmmmmm
( i nch ) ( i nch ) ( i nch ) ( i nch )
EEEE mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
FFFF mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
GGGG mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
HHHH mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
I I I I mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
LLLL mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
MMMM mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
NNNN mmmmmmmm
( i nch )( i nch )( i nch )( i nch )
Orifice Orifice Orifice Orifice mm mm mm mm
( i nch )( i nch )( i nch )( i nch )
B20V01T01B20V01T01B20V01T01B20V01T01 1/4” M/P
50.5 (1.99)
45.5 ( 1.79)
25.4 (1) 32.8
(1.29) 10.9
(0.43) 19.05 (0.75)
7.1 (0.28)
1/4”-20 UNC
70 (2.75)
103.3 (4.07)
96 (3.78)
19.05 (0.75)
2.8 (0.11)
B20V01T02B20V01T02B20V01T02B20V01T02 3/8” M/P
50.5 (1.99)
45.5 ( 1.79)
25.4 (1) 32.8
(1.29) 10.9
(0.43) 19.05 (0.75)
7.1 (0.28)
1/4”-20 UNC
70 (2.75)
103.3 (4.07)
96 (3.78)
19.05 (0.75)
5.2 (0.205)
B20V01T03B20V01T03B20V01T03B20V01T03 9/16” M/P
76.2 (3) 53.45 (2.1)
34.9 (1.37)
36 (1.42)
10.9 (0.43)
19.05 (0.75)
7.1 (0.28)
1/4”-20 UNC
115 (4.53)
143.9 (5.66)
104 (4.09)
34.9 (1.375)
9 (0.354)
Specifications
• Pressure 20,000 Psi ( 1380 Bar ) • Positive sealing assured by pressure loa-
ded seats • Maximum safety assured by blowout-proof
stem and ball • Versatile installation thanks to wide choice
of replaceable connections. • Minimum pressure drop assured by straight
through flow path.
A
B
C
Ba
ll Va
lve
s
Page 41
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Notes
Page 42
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Ordering Information Ordering Information Ordering Information Ordering Information ---- LowLowLowLow----MediumMediumMediumMedium----High Pressure AdaptersHigh Pressure AdaptersHigh Pressure AdaptersHigh Pressure Adapters
Adapters
First ConnectionFirst ConnectionFirst ConnectionFirst Connection Second ConnectionSecond ConnectionSecond ConnectionSecond Connection OptionsOptionsOptionsOptions
1° DIGIT 2° DIGIT 3° 4° DIGIT 5° DIGIT 6° DIGIT 7° 8° DIGIT 9° DIGIT
SERIES MALE or FEMALE SIZE SERIES MALE or FEMALE SIZE MATERIAL
For male/male adapters the Series of the 1° digit is bigger or equal to the Series of the 5° digit
For female/male adapters the first connection is always female (2° digit = F)
Female/female adapters are not available yet, therefore the second connection is always male (6° digit = M)
For Sour Gas Service, add the letters SGS at the end of the code.
Series Series Series Series
HHHH High Pressure
MMMM Medium Pressure Series
NNNN NPT Series
Series Series Series Series
HHHH High Pressure Series
MMMM Medium Pressure Series
NNNN NPT Series
M or F M or F M or F M or F
MMMM Male
FFFF Female
M or F M or F M or F M or F
MMMM Male
FFFF Female
SizeSizeSizeSize
01010101 1/4" C&T
02020202 3/8" C&T
03030303 9/16" C&T
04040404 3/4" C&T
05050505 1" C&T
10101010 1/8" NPT
11111111 1/4" NPT
12121212 3/8" NPT
13131313 1/2" NPT
14141414 3/4" NPT
15151515 1" NPT
SizeSizeSizeSize
01010101 1/4" C&T
02020202 3/8" C&T
03030303 9/16" C&T
04040404 3/4" C&T
05050505 1" C&T
10101010 1/8" NPT
11111111 1/4" NPT
12121212 3/8" NPT
13131313 1/2" NPT
14141414 3/4" NPT
15151515 1" NPT
MaterialMaterialMaterialMaterial
BBBB Carbon steel C50
CCCC Aisi 316 Ti
DDDD Monel 400
EEEE Duplex F51
FFFF Super Duplex F53
GGGG Super Duplex F55
HHHH Hastelloy C276
IIII Inconel 625
JJJJ Incolloy 825
Example: M/M adapter
Connection A = 1/4" C&T 20000 psi
Conmnection B = 3/8" C&T 60000 psi
Material = MONEL 400
HM02MM01D
AD
AP
TE
RS
- OR
DE
RIN
G IN
FO
RM
AT
ION
Page 43
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Adapters
MALE-BY-MALE ADAPTERS
HIGH PRESSURE SERIES
H
HIGH PRESSURE MALE
1/4" 3/8" 9/16" 3/4" 1"
M01 M02 M03 M04 M05
HIGH
PRESSURE
MALE
60000 PSI H 1/4" M01 HM01HM01 HM02HM01 HM03HM01 HM04HM01 HM05HM01
60000 PSI H 3/8" M02 HM01HM02 HM02HM02 HM03HM02 HM04HM02 HM05HM02
60000 PSI H 9/16" M03 HM01HM03 HM02HM03 HM03HM03 HM04HM03 HM05HM03
60000 PSI H 3/4" M04 HM01HM04 HM02HM04 HM03HM04 HM04HM04 HM05HM04
60000 PSI H 1" M05 HM01HM05 HM02HM05 HM03HM05 HM04HM05 HM05HM05
MEDIUM
PRESSURE
MALE
20000 PSI M 1/4" M01 HM01MM01 HM02MM01 HM03MM01 HM04MM01 HM05MM01
20000 PSI M 3/8" M02 HM01MM02 HM02MM02 HM03MM02 HM04MM02 HM05MM02
20000 PSI M 9/16" M03 HM01MM03 HM02MM03 HM03MM03 HM04MM03 HM05MM03
20000 PSI M 3/4" M04 HM01MM04 HM02MM04 HM03MM04 HM04MM04 HM05MM04
20000 PSI M 1" M05 HM01MM05 HM02MM05 HM03MM05 HM04MM05 HM05MM05
NPT MALE
15000 PSI N 1/8" M10 HM01NM10 HM02NM10 HM03NM10 HM04NM10 HM05NM10
15000 PSI N 1/4" M11 HM01NM11 HM02NM11 HM03NM11 HM04NM11 HM05NM11
15000 PSI N 3/8" M12 HM01NM12 HM02NM12 HM03NM12 HM04NM12 HM05NM12
15000 PSI N 1/2" M13 HM01NM13 HM02NM13 HM03NM13 HM04NM13 HM05NM13
15000 PSI N 3/4" M14 HM01NM14 HM02NM14 HM03NM14 HM04NM14 HM05NM14
15000 PSI N 1" M15 HM01NM15 HM02NM15 HM03NM15 HM04NM15 HM05NM15
Ad
ap
ters
Sami also provides a complete range of adapters in order to connect easily from tube to tube and from tube to pipe. • Standard body material: high tensile 316 stainless steel. • Standard tubing glands and collars ( sleeves ) are provided with adapters unless otherwise specified. The charts below and in the following pages will guide you to choose the best adapter for your application.
Page 44
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Adapters
MALE-BY-MALE ADAPTERS
MEDIUM PRESSURE SERIES
M
MEDIUM PRESSURE MALE
1/4" 3/8" 9/16" 3/4" 1"
M01 M02 M03 M04 M05
HIGH
PRESSURE
MALE
60000 PSI H 1/4" M01
SEE SERIES H
60000 PSI H 3/8" M02
60000 PSI H 9/16" M03
60000 PSI H 3/4" M04
60000 PSI H 1" M05
MEDIUM
PRESSURE
MALE
20000 PSI M 1/4" M01 MM01MM01 MM02MM01 MM03MM01 MM04MM01 MM05MM01
20000 PSI M 3/8" M02 MM01MM02 MM02MM02 MM03MM02 MM04MM02 MM05MM02
20000 PSI M 9/16" M03 MM01MM03 MM02MM03 MM03MM03 MM04MM03 MM05MM03
20000 PSI M 3/4" M04 MM01MM04 MM02MM04 MM03MM04 MM04MM04 MM05MM04
20000 PSI M 1" M05 MM01MM05 MM02MM05 MM03MM05 MM04MM05 MM05MM05
NPT MALE
15000 PSI N 1/8" M10 MM01NM10 MM02NM10 MM03NM10 MM04NM10 MM05NM10
15000 PSI N 1/4" M11 MM01NM11 MM02NM11 MM03NM11 MM04NM11 MM05NM11
15000 PSI N 3/8" M12 MM01NM12 MM02NM12 MM03NM12 MM04NM12 MM05NM12
15000 PSI N 1/2" M13 MM01NM13 MM02NM13 MM03NM13 MM04NM13 MM05NM13
15000 PSI N 3/4" M14 MM01NM14 MM02NM14 MM03NM14 MM04NM14 MM05NM14
15000 PSI N 1" M15 MM01NM15 MM02NM15 MM03NM15 MM04NM15 MM05NM15
Ad
ap
ters
Page 45
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Adapters
MALE-BY-MALE ADAPTERS
NPT SERIES
N
NPT MALE
1/4" 3/8" 9/16" 3/4" 1"
M01 M02 M03 M04 M05
HIGH
PRESSURE
MALE
60000 PSI H 1/4" M01
SEE SERIES H
60000 PSI H 3/8" M02
60000 PSI H 9/16" M03
60000 PSI H 3/4" M04
60000 PSI H 1" M05
MEDIUM
PRESSURE
MALE
20000 PSI M 1/4" M01
SEE SERIES M
20000 PSI M 3/8" M02
20000 PSI M 9/16" M03
20000 PSI M 3/4" M04
20000 PSI M 1" M05
NPT MA-
LE
15000 PSI N 1/8" M10 NM01NM10 NM02NM10 NM03NM10 NM04NM10 NM05NM10
15000 PSI N 1/4" M11 NM01NM11 NM02NM11 NM03NM11 NM04NM11 NM05NM11
15000 PSI N 3/8" M12 NM01NM12 NM02NM12 NM03NM12 NM04NM12 NM05NM12
15000 PSI N 1/2" M13 NM01NM13 NM02NM13 NM03NM13 NM04NM13 NM05NM13
15000 PSI N 3/4" M14 NM01NM14 NM02NM14 NM03NM14 NM04NM14 NM05NM14
15000 PSI N 1" M15 NM01NM15 NM02NM15 NM03NM15 NM04NM15 NM05NM15
Ad
ap
ters
Page 46
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Adapters
FEMALE-BY-MALE ADAPTERS
SERIES
H
HIGH PRESSURE FEMALE
1/4" 3/8" 9/16" 3/4" 1"
F01 F02 F03 F04 F05
HIGH PRES-
SURE MALE
60000 PSI H 1/4" M01 HF01HM01 HF02HM01 HF03HM01 HF04HM01 HF05HM01
60000 PSI H 3/8" M02 HF01HM02 HF02HM02 HF03HM02 HF04HM02 HF05HM02
60000 PSI H 9/16" M03 HF01HM03 HF02HM03 HF03HM03 HF04HM03 HF05HM03
60000 PSI H 3/4" M04 HF01HM04 HF02HM04 HF03HM04 HF04HM04 HF05HM04
60000 PSI H 1" M05 HF01HM05 HF02HM05 HF03HM05 HF04HM05 HF05HM05
MEDIUM
PRESSURE
MALE
20000 PSI M 1/4" M01 HF01MM01 HF02MM01 HF03MM01 HF04MM01 HF05MM01
20000 PSI M 3/8" M02 HF01MM02 HF02MM02 HF03MM02 HF04MM02 HF05MM02
20000 PSI M 9/16" M03 HF01MM03 HF02MM03 HF03MM03 HF04MM03 HF05MM03
20000 PSI M 3/4" M04 HF01MM04 HF02MM04 HF03MM04 HF04MM04 HF05MM04
20000 PSI M 1" M05 HF01MM05 HF02MM05 HF03MM05 HF04MM05 HF05MM05
NPT MALE
15000 PSI N 1/8" M10 HF01NM10 HF02NM10 HF03NM10 HF04NM10 HF05NM10
15000 PSI N 1/4" M11 HF01NM11 HF02NM11 HF03NM11 HF04NM11 HF05NM11
15000 PSI N 3/8" M12 HF01NM12 HF02NM12 HF03NM12 HF04NM12 HF05NM12
15000 PSI N 1/2" M13 HF01NM13 HF02NM13 HF03NM13 HF04NM13 HF05NM13
15000 PSI N 3/4" M14 HF01NM14 HF02NM14 HF03NM14 HF04NM14 HF05NM14
15000 PSI N 1" M15 HF01NM15 HF02NM15 HF03NM15 HF04NM15 HF05NM15
Ad
ap
ters
Page 47
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Adapters
FEMALE-BY-MALE ADAPTERS
SERIES
M
MEDIUM PRESSURE FEMALE
1/4" 3/8" 9/16" 3/4" 1"
F01 F02 F03 F04 F05
HIGH
PRESSURE
MALE
60000 PSI H 1/4" M01 MF01HM01 MF02HM01 MF03HM01 MF04HM01 MF05HM01
60000 PSI H 3/8" M02 MF01HM02 MF02HM02 MF03HM02 MF04HM02 MF05HM02
60000 PSI H 9/16" M03 MF01HM03 MF02HM03 MF03HM03 MF04HM03 MF05HM03
60000 PSI H 3/4" M04 MF01HM04 MF02HM04 MF03HM04 MF04HM04 MF05HM04
60000 PSI H 1" M05 MF01HM05 MF02HM05 MF03HM05 MF04HM05 MF05HM05
MEDIUM
PRESSURE
MALE
20000 PSI M 1/4" M01 MF01MM01 MF02MM01 MF03MM01 MF04MM01 MF05MM01
20000 PSI M 3/8" M02 MF01MM02 MF02MM02 MF03MM02 MF04MM02 MF05MM02
20000 PSI M 9/16" M03 MF01MM03 MF02MM03 MF03MM03 MF04MM03 MF05MM03
20000 PSI M 3/4" M04 MF01MM04 MF02MM04 MF03MM04 MF04MM04 MF05MM04
20000 PSI M 1" M05 MF01MM05 MF02MM05 MF03MM05 MF04MM05 MF05MM05
NPT MALE
15000 PSI N 1/8" M10 MF01NM10 MF02NM10 MF03NM10 MF04NM10 MF05NM10
15000 PSI N 1/4" M11 MF01NM11 MF02NM11 MF03NM11 MF04NM11 MF05NM11
15000 PSI N 3/8" M12 MF01NM12 MF02NM12 MF03NM12 MF04NM12 MF05NM12
15000 PSI N 1/2" M13 MF01NM13 MF02NM13 MF03NM13 MF04NM13 MF05NM13
15000 PSI N 3/4" M14 MF01NM14 MF02NM14 MF03NM14 MF04NM14 MF05NM14
15000 PSI N 1" M15 MF01NM15 MF02NM15 MF03NM15 MF04NM15 MF05NM15
Ad
ap
ters
Page 48
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Adapters
FEMALE-BY-MALE ADAPTERS
SERIES
N
NPT FEMALE
1/8" 1/4" 3/8" 1/2" 3/4" 1"
F10 F11 F12 F13 F14 F15
HIGH
PRESSURE
MALE
60000 PSI H 1/4" M01 NF10HM01 NF11HM01 NF12HM01 NF13HM01 NF14HM01 NF15HM01
60000 PSI H 3/8" M02 NF10HM02 NF11HM02 NF12HM02 NF13HM02 NF14HM02 NF15HM02
60000 PSI H 9/16" M03 NF10HM03 NF11HM03 NF12HM03 NF13HM03 NF14HM03 NF15HM03
60000 PSI H 3/4" M04 NF10HM04 NF11HM04 NF12HM04 NF13HM04 NF14HM04 NF15HM04
60000 PSI H 1" M05 NF10HM05 NF11HM05 NF12HM05 NF13HM05 NF14HM05 NF15HM05
MEDIUM
PRESSURE
MALE
20000 PSI M 1/4" M01 NF10MM01 NF11MM01 NF12MM01 NF13MM01 NF14MM01 NF15MM01
20000 PSI M 3/8" M02 NF10MM02 NF11MM02 NF12MM02 NF13MM02 NF14MM02 NF15MM02
20000 PSI M 9/16" M03 NF10MM03 NF11MM03 NF12MM03 NF13MM03 NF14MM03 NF15MM03
20000 PSI M 3/4" M04 NF10MM04 NF11MM04 NF12MM04 NF13MM04 NF14MM04 NF15MM04
20000 PSI M 1" M05 NF10MM05 NF11MM05 NF12MM05 NF13MM05 NF14MM05 NF15MM05
NPT MALE
15000 PSI N 1/8" M10 NF10NM10 NF11NM10 NF12NM10 NF13NM10 NF14NM10 NF15NM10
15000 PSI N 1/4" M11 NF10NM11 NF11NM11 NF12NM11 NF13NM11 NF14NM11 NF15NM11
15000 PSI N 3/8" M12 NF10NM12 NF11NM12 NF12NM12 NF13NM12 NF14NM12 NF15NM12
15000 PSI N 1/2" M13 NF10NM13 NF11NM13 NF12NM13 NF13NM13 NF14NM13 NF15NM13
15000 PSI N 3/4" M14 NF10NM14 NF11NM14 NF12NM14 NF13NM14 NF14NM14 NF15NM14
15000 PSI N 1" M15 NF10NM15 NF11NM15 NF12NM15 NF13NM15 NF14NM15 NF15NM15
Ad
ap
ters
Page 49
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Repair kits
Sami also offers repair kits for the bonnets of its low, medium and high pressure valves. Standard bonnet material: 316L stainless steel. You can choose the correct repair kit from the chart below, using the Sami valve p/no to guide you.
Repair kit codeRepair kit codeRepair kit codeRepair kit code For valve no.For valve no.For valve no.For valve no. DescriptionDescriptionDescriptionDescription DrawingDrawingDrawingDrawing
A0095A0095A0095A0095----0003000300030003----001001001001
S15V01T13 Valve 15 kpsi F/F 1/2 ” NPT
S15V10T13 Valve 15 kpsi M/F 1/2 ” NPT
A0100A0100A0100A0100----0003000300030003----001001001001
S20V01T01 Valve 20 kpsi 1/4 ” O.D.
S20V01T02 Valve 20 kpsi 3/8 ” O.D.
S20V02T01 Valve 20 kpsi 1/4 ” O.D.
S20V02T02 Valve 20 kpsi 3/8 ” O.D.
S15V01T11 Valve 15 kpsi F/F 1/4 ” NPT
S15V01T12 Valve 15 kpsi F/F 3/8 ” NPT
A0100A0100A0100A0100----0004000400040004----001 001 001 001
S20V01T03 Valve 20 kpsi 9/16 ” O.D.
S20V02T03 Valve 20 kpsi 9/16 ” O.D.
S15V01T13 Valve 15 kpsi F/F 1/2 ” NPT
S15V10T13 Valve 15 kpsi M/F 1/2 ” NPT
Re
pa
ir Kits
Page 50
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Repair kits
Repair kit codeRepair kit codeRepair kit codeRepair kit code For valve no.For valve no.For valve no.For valve no. DescriptionDescriptionDescriptionDescription DrawingDrawingDrawingDrawing
A0110A0110A0110A0110----0002000200020002----001 001 001 001
S30V01T01 Valve 30 kpsi 1/4 ” O.D.
S30V01T02 Valve 30 kpsi 3/8 ” O.D.
S30V01T03 Valve 30 kpsi 9/16 ” O.D.
S30V04T01 Valve 30 kpsi 1/4 ” O.D.
S30V04T02 Valve 30 kpsi 3/8 ” O.D.
S30V04T03 Valve 30 kpsi 9/16 ” O.D.
A0120A0120A0120A0120----0002000200020002----001001001001
S60V01T01 Valve 60 kpsi 1/4 ” O.D.
S60V01T02 Valve 60 kpsi 3/8 ” O.D.
S60V01T03 Valve 60 kpsi 9/16 ” O.D.
S60V02T01 Valve 60 kpsi 1/4 ” O.D.
S60V02T02 Valve 60 kpsi 3/8 ” O.D.
S60V02T03 Valve 60 kpsi 9/16 ” O.D.
Re
pa
ir Kits
Page 51
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Repair kits
Repair kit codeRepair kit codeRepair kit codeRepair kit code For valve no.For valve no.For valve no.For valve no. DescriptionDescriptionDescriptionDescription DrawingDrawingDrawingDrawing
AS20F01AS20F01AS20F01AS20F01----005005005005----001001001001 S20F01T01 Soft Check Valve 20 kpsi
1/4 ” O.D.
AS20F01AS20F01AS20F01AS20F01----006006006006----001001001001 S20F01T02 Soft Check Valve 20 kpsi
3/8 ” O.D.
AS20F01AS20F01AS20F01AS20F01----004004004004----001001001001 S20F01T03 Soft Check Valve 20 kpsi
9/16 ” O.D.
AS20F02AS20F02AS20F02AS20F02----002002002002----001001001001 S20F02T01 Ball Check Valve 20 kpsi
1/4 ” O.D.
AS20F02AS20F02AS20F02AS20F02----003003003003----001001001001 S20F02T02 Ball Check Valve 20 kpsi
3/8 ” O.D.
AS60F01AS60F01AS60F01AS60F01----006006006006----001001001001 S60F01T01 Soft Check Valve 60 kpsi
1/4 ” O.D.
AS60F01AS60F01AS60F01AS60F01----007007007007----001001001001 S60F01T02 Soft Check Valve 60 kpsi
3/8 ” O.D.
AS60F01AS60F01AS60F01AS60F01----005005005005----001001001001 S60F01T03 Soft Check Valve 60 kpsi
9/16 ” O.D.
AS60F02AS60F02AS60F02AS60F02----001001001001----001001001001 S60F02T01 Ball Check Valve 60 kpsi
1/4 ” O.D
AS60F02AS60F02AS60F02AS60F02----002002002002----001001001001 S60F02T02 Ball Check Valve 60 kpsi
3/8 ” O.D
AS60F02AS60F02AS60F02AS60F02----003003003003----001001001001 S60F02T03 Ball Check Valve 60 kpsi
9/16 ” O.D
AS20F02AS20F02AS20F02AS20F02----001001001001----001001001001 S20F02T03 Ball Check Valve 20 kpsi
9/16 ” O.D.
Repair Kits for Check ValvesRepair Kits for Check ValvesRepair Kits for Check ValvesRepair Kits for Check Valves
Re
pa
ir Kits
Page 52
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Notes
Page 53
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011 Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
TE
CH
NIC
AL
INF
OR
MA
TIO
N
High pressure curve
Pressure/Temperature Rating Curve: SS 316 & SS 304
The chart below illustrates the maximum working pressure to which SS 316 valves and fittings can resist, according to the various temperatures. The values on the vertical axis are expressed as a percentage of the R.T. pressure rating of the item. For instance, an item with 10,000 psi ( 690 bar ) rating pressure at R.T. would have a rating of 9,000 psi ( 621 bar ) at the temperature of 316°C ( 600°F ) , i.e. 90% of its rating. Please note that the chart and values below are for reference only and may change according to different features in pressure and temperature of trim and packing materials. The chart is only valid provided that the working temperature of cold-worked SS 316 does not exceed 427°C ( 8 00°F ) . When exceeding this temperature the material will be permanently altered and the items should be con-sidered as annealed material , i.e. they will use 40% of the cold-working rating for future operations.
Page 54
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2011201120112011
Notes