SAMSUNG Proprietary-Contents may change without notice

7. Level 2 Repair

7-1

This Document can not be used without Samsung's authorization

1. Assemble HOME Key on the front.1. Set for Front's LCD place figures and assemble LCD,

be careful of 2 Front's Hooks.

1. Land a Shield can on the PBA.

2. Assemble an Intenna using 2 Hooks.1. Screw 5 points on the PBA's rear.

7-1. Disassembly and assembly Instructions

7-1-1. Disassembly

Assemble HOME Key on the FRONT1 Land LCD on the FRONT2

Assemble Shield can & Intenna3 Screw 5 points4

SAMSUNG Proprietary-Contents may change without notice

7. Level 2 Repair

7-2

This Document can not be used without Samsung's authorization

1. Assemble PBA Ass'y from Front's top after connecting

a TSP connector.

1. Press PBA around 2 Hooks of Front.

2. Assemble a LCD Connector

1. Assemble the rear from the top to the Bottom of SET 1. Torque : 1.1 ± 0.1 Kgf·cm

Assemble a PBA Ass'y5 Assemble a PBA Ass'y(2)6

7 Assemble the REAR 8 Screw 4 point

ⓛ

ⓛ

②

ⓛ

② ②

③

SAMSUNG Proprietary-Contents may change without notice

7. Level 2 Repair

7-3

This Document can not be used without Samsung's authorization

1. Disassemble the rear from the SET's down side using

a disassembling JIG.

1. Progress disassemble to direction of up side afterdisassemble down side

1. Disassemble REAR to top from the bottom.

7-1-2. assemble

Unscrew REAR 4 Points1 Disassemble REAR2

3 Disassemble REAR(2) 4 Disassemble REAR(3)

ⓛ

②②

SAMSUNG Proprietary-Contents may change without notice

7. Level 2 Repair

7-4

This Document can not be used without Samsung's authorization

1. Separate LCD Connector 1. Disassemble the PBA Ass'y, be careful of 2 Hooks.

7 Disassemble PBA Ass'y(2)

1. Lift up the PBA Ass'y from down side of Front. 1. Separate the TSP Connector carefully.

Separate LCD Connector5 Disassemble PBA Ass'y6

8 Separate TSP Connector

SAMSUNG Proprietary-Contents may change without notice

7. Level 2 Repair

7-5

This Document can not be used without Samsung's authorization

1. Unscrew 5 point of the Shield can and Intenna.1. Separate the HOME Key

2. Twist the Front and detach a LCD from the FRONT

11 Disassemble the LCD

1. Disassemble the LCD, be careful of 2 Hooks of theFront.

Unscrew 5 point9 Disassemble the LCD & Home Key10

12 Disassembling Complete