07 FORM MEETS FUNCTION - Suppliers - Sweets · Newark, NJ P: 973.857.1405 F: 973.857.1406 New York,...

FORM MEETS FUNCTION07

ARCHITECTURAL METAL WALL AND ROOF SYSTEMS

236

University of Phoenix StadiumGlendale, AZ ArchitectEisenman Architects; New York, NY & HOK Sport, Venue, Event; Kansas, MO

CONTENTS

3 Performance

4 Formawall® Dimension Series®

10 Formawall® Graphix Series™

12 Formavue® Integrated Window System

14 Versawall® Wall Panel System

15 Versapanel® Wall & Roof Panel System

16 FormaBond® Metal Composite Wall System

19 Profile Series Concept Series®

20 Profile Series IW Series

22 Profile Series Exposed Fastener Panels

23 Profile Series Liner Panels

24 Profile Series Design Options

26 Profile Series Load Tables

30 SRS® Structural Standing Seam Roof Systems

30 Other Roof Panels

31 Curved SRS 3 Roof System

32 Ventilation Systems

33 Product Finish Availability

34 Coating Systems

CONTENTS

COATING SYSTEMS AND SUBSTRATES

3536

CENTRIA.com

CENTRIA COLORS

† †

PRISMATIC™ SERIES COLORS – FLUOROFINISH, DURAGARD AND DURAGARD PLUS

Unless specified otherwise, CENTRIA will provide a standard backer coat on the backside of singleskin panels. Color may vary.

Polyester Arctic Ice is the standard finish offering for the interior surfaces of foam panels. Otherfinishes available upon request.

BRILLIANT™ SERIES COLORS

SUNDANCE™ SERIES COLORS

Sundance Mica 2-coat

Sundance AM Aluminum Metallic 3-coat

NOTE: Because

of the differences

in the formulation

and application

properties of spray-

applied coatings

versus coil coatings,

a slight color

variation is likely

to occur when

matching coatings

of these different

types.

Colors shown are for preliminary selection only. Printed colors can vary from actual painted material. Contact CENTRIA for painted metal samples before final selection.

NOTE: Duracast available exclusively on Formawall® Dimension Series® and Versawall®.

DURACAST® TEXTURED FINISH SYSTEM

Off-White Limestone Lee Ivory Surrey Beige Light Seawolf Dove Gray

C ENERGY STAR® qualified cool roofing color for low or steep slope applications

CS ENERGY STAR qualified cool roofing color for steep slope application†Standard Duracast finish color. Consult CENTRIA for custom colors.

3 Brilliant Series 3-Coat System

Custom colors may require an additional clear and/or barrier coat.Consult CENTRIA for details.

Light Gray Slate Gray

1.800.759.74741005 Beaver Grade Road, Moon Township, PA 15108-2944Phone: 412.299.8000Fax: 412.299.8317

Reference CAS-4/07 20M PG/GCS

Copyright © 2007 CENTRIA

Printed in U.S.A.

Baltimore, MD

P: 410.549.6018F: 410.795.5984

Boston, MA

P: 978.779.7929F: 978.779.7930

Burlington, CT

P: 860.659.4045F: 860.659.4034

Newark, NJ

P: 973.857.1405F: 973.857.1406

New York, NY

P: 914.834.7697F: 914.833.1843

Philadelphia, PA

P: 215.643.6040F: 215.643.0629

Pittsburgh, PA

P: 412.299.8175F: 412.299.8016

Syracuse, NY

P: 315.214.3753F: 315.214.3753

Washington, DC

P: 703.406.9588F: 703.406.9457

Dallas, TX

P: 469.675.0917F: 972.390.9103

Denver, CO

P: 303.743.7430F: 303.743.7451

Des Moines, IA

P: 630.922.3303F: 630.922.3833

Houston, TX

P: 281.397.9900F: 281.397.6363

Minneapolis, MN

P: 763.577.1417F: 763.577.0319

San Francisco, CA

P: 650.369.9400F: 650.369.9483

St. Louis, MO

P: 314.432.3434F: 314.432.6863

Seattle, WA

P: 253.460.3779F: 253.460.1664

Southern California(Los Angeles)

P: 949.589.0997F: 408.267.6513

NORTHEAST REGION

1.800.586.1372SOUTH CENTRAL REGION

1.800.586.1372WEST REGION

1.888.745.8527

Atlanta, GA

P: 678.947.4407F: 678.947.4612

Charlotte, NC

P: 704.341.0202F: 704.341.0204

Cincinnati, OH

P: 513.793.9160F: 513.793.9161

Detroit, MI

P: 734.529.7256F: 734.529.7257

Greenville, SC

P: 864.288.9129F: 864.288.7401

Indianapolis, IN

C: 317.514.7330F: 317.566.9675

Milwaukee, WI

P: 262.538.4415F: 262.538.4417

Sarasota, FL

P: 941.342.0722F: 941.342.8862

Western Michigan

P: 248.486.6867F: 248.486.8939

www.CENTRIA .comCENTRIA products, including Dimension Series® metal wall systems have

inherent sustainable characteristics. Our products are primarily composed

of steel and other metals which have been, and can repeatedly be,

recycled. Our factory foamed insulation provides an insulation value

in excess of alternative systems saving energy cost and fuel resources.

CENTRIA also offers specific high-performance, sound-reducing products to

protect the environment from machine or process-generated noise pollution.

CENTRIA unsurpassed design, engineering and sales support is backed by a century of experience.We offer you:

Through continuous pursuit of excellence and innovation in the design, engineering

and manufacturing of exterior wall and roof systems, no other company does more to

improve the aesthetics, durability and performance of our world’s commercial buildings

than CENTRIA.

Behind the eye-popping aesthetics of all CENTRIA architectural systems are sound scientific

principles and rigorous real-world testing that CENTRIA refers to as ATMP® – Advanced

Thermal and Moisture Protection. For architects and owners, this means lifelong and

trouble-free thermal efficiency and moisture protection for their buildings.

Ultimately, CENTRIA ATMP®, along with characteristics intrinsic to CENTRIA products and

CENTRIA’s close attention to manufacturing, shipping and dealer installation – all combine to reduce

your next building’s impact on our environment and the limited resources of our world.

PERFORMANCE

336

CENTRIA.com

CENTRIA Formawall® Dimension Series® insulated metal composite wall systemis the first-ever exterior wall system to earn Cradle-to-Cradle Silver Certification.CENTRIA Versawall® followed achieving Silver Certification and CENTRIAEcoScreen™ was honored Gold Certification. The fully recyclable system carriesthis distinction by virtue of its manufacturing process that limits the impact on human and environmental health, minimizes water energy usage and tightlylimits scrap. Plus, its simple design conserves raw material consumption whileproviding outstanding thermal efficiency and effective moisture control indefinitely.

CENTRIA SERVICES

• Architectural and structural engineering services at any phase of your project

• Sales service teams committed to total customer satisfaction

• Product selection and cost estimating expertise

• Detail and engineering assistance for standardand custom applications

• Development of details and specifications

• Consulting on substrates, coatings and colors

• Comprehensive in-house coil coating services

• Thermal and structural analyses

• National and international sales and factory certified installer networks

ITC Parking DeckCharlotte, NC

ArchitectLittle DiversifieldArchitecturalConsultants Charlotte, NC

Cover Walgreens Distribution Center

Alliance Industrial ParkAnderson County, SC

Architect: Korte Co.St. Louis, MO

PERFORMANCE

FORMAWALL®

THE COMPLETEWALL SYSTEM

DIMENSION SERIES

436

D S - 5 9 P R O F I L E

D S - 6 0 P R O F I L E

2 ” T H I C K PA N E L O V E R A 3 ” T H I C K PA N E L

R E V E A L S F R O M 1 / 2 ” T O 6 ” I N 1/2” INCREMENTS,M AY B E C O L O R I Z E D

Integrated rainscreen with pressure-equalized and vented dry sealed joinery provides long-term protectionwith minimal maintenance.

Concealed clip installation provides fast close-in and eliminates the needfor exterior gypsum sheathing.

Integrated 2” or 3” rigid closed-cellinsulation cannot wet like batt insulation and is located outboard ofstuds for maximum thermal efficiency.

Integrated air & vapor barrier comprisedof steel liners and unexposed and protected sealant eliminates buildingwraps and vapor barriers, and takesthe guesswork out of designing wallsfor specific climates.

FORMAWAL L D IMENS ION S ER I E S S TUD I NSU L AT ED MULT I - COMPONENT WAL L CONSTRUC T ION

1 component required 7 components required1 installer required Up to 3 installers required

Works for all climates Climate specific design requiredSuperior thermal efficiency Thermally inefficient

Total air & moisture control Questionable air & moisture controlContains no mold food sources May contain mold food sources

Integrated windows, louvers and sunshades No integrated componentsProven systematized long-term performance Unknown – dependant on installation quality

Compared to traditional multi-component wall construction – typically requiring seven separate components including:a rainscreen, an air barrier, exterior gypsum sheathing, fiberglass insulation and a vapor barrier – FormawallDimension Series only requires one component to create a wall with superior thermal efficiency and moisture control in any environment.

CENTRIA Formawall Dimension Series, is the only wall system that provides both

advanced thermal efficiency and moisture control in a single panelized component.

This extraordinary performance, combined with integrated wall components – such

as windows, louvers and sunshades – and the system’s ability to provide designers

virtually unlimited possibilities in form, color and texture, make Formawall Dimension

Series today’s preferred metal wall system.

THE COMPLETE WALL SYSTEM SIMPLY SUPERIOR IN EVERY RESPECT

VS.

FORMAWALL® DIMENSION SERIES®

Factory foam-insulated architectural wall panel system

SUBSTRAT E & CORE

• Standard – 22/26 gage G-90 galvanized steel face andliner with CFC-free polyurethane or polyisocyanuratefoam-insulated core

• Optional stainless steel face sheet, 304 stainlesssteel, 22 or 20 gage

• Optional gages available – consult CENTRIA

J O I N ERY

• Horizontal oriented panel – Rainscreen, pressure-equalized and drainable joinery, 1/2” nom. joint –standard

• Vertical oriented panel – Double tongue-and-groove,1/8” nom. joint – standard

SUR FAC E F I N I SH

• Exterior – Non-directional embossed flat or striated

– Smooth flat or striated

• Interior – Non-directional embossed planked or flat

– Smooth planked

COAT I NGS & CO LORS

• Advanced Fluorfinish PVDF, metallic and mica colorcoatings in standard & custom colors

• Duragard & Duragard Plus premium high build archtectural coatings

• Duracast® – a natural appearing textured finish

PANE L W ID TH

• Standard – 24”, 30”, 36”

• Custom – 10” to 40”

PANE L L ENGTH

• Smooth – 16’ max.

• Embossed striated – 37’ max.

• Embossed – 37’ max.

• Smooth striated – 20’ max.

• Duracast – 28’ max.

PANE L TH I CKNESS / D EP TH O F R EV EA L

• 2” with 1-3/16” deep reveal – standard

• 3” with 2-3/16” deep reveal

“ R ” VA LU E

• 2” panel with 1/2” reveal – R14


R-Values are based on ASTM C236 and C518 testing.Air films are included.

* All data shown for flat panels only. Consult CENTRIA for profiled panel information.

• May be installed horizontally or vertically

• Available in a variety of interchangeable reveals,thickness and profile configurations

• Concealed clips, fasteners and sealants plus vertical dry gaskets provide a clean, uninterruptedappearance

• Factory foamed-in-place core to ensure no insulationgaps within the panel

• Panels integrate with CENTRIA Formavue® windowsystems and are compatible with most other glasswall and window systems

• Pressure-equalized horizontal joinery to help preventwater infiltration

• Extruded aluminum or factory-formed metal trimavailable

• Panels can be easily curved

• Mitered panels permit clean, sharp corners, beamand column wraps

• Trimless ends eliminate overlapping trim at panelend details

• Thermal break between face and liner offers efficientpanel R-values

• High strength panels offer increased span capabilityand save support costs with less framing required

• Lightweight – as low as 2.7 psf – easy to handleand install and minimizes foundation load

• Stainless, striated, smooth, embossed and precast-like surface treatments available

• Cradle-to-Cradle Certification

• In accordance with Montreal protocol

• Integrated louvers and sunshades available

FORMAWALL®


DIMENSION SERIES

536

FEATURES & BENEFITS DESCRIPTION

Charlotte Bobcat ArenaCharlotte, NC

ArchitectEllerbe Becket Inc; Kansas City, MO & TheFreelon Group; Research Triangle Park, NC

CENTRIA.com

FORMAWALL®


DIMENSION SERIES

636

Insulating foam core, factory foamed-in-place, provides a thermallyefficient exterior wall in either 2” or 3” thickness

Durable metal skins provide impactresistance, strength for increased spancapability and a built-in vapor barrier

Concealed clips and fasteners provide a sleek exterior appearance with proven long-term performance

Rainscreen and pressure equalizationdesign with concealed sealant protectsagainst water penetration

Variable reveal sizes, 1/2” to 6”

High performance coatings offer long-term performance, minimal maintenance and excellent color selection for your building’s exterior

VERTICAL & HORIZONTAL PANEL ALLOWABLE SPANSFT-IN – 2” THICKNESS

Module Gage No. Load - psf(in.) F/L Spans 20 30 40 50

36 22/26 1 11-9 8-8 6-6 5-3

2 12-0 9-9 7-5 6-1

3 12-0 10-9 8-0 6-4

30 22/26 1 11-9 9-11 7-10 6-3

2 12-0 11-7 8-10 7-2

3 12-0 11-8 9-8 7-8

24 22/26 1 11-9 9-11 8-8 7-10

2 12-0 11-8 10-3 8-10

3 12-0 11-8 10-2 9-0

1. Spans are based on a maximum 1/2" reveal.

2. Spans are limited to a maximum deflection of L/180.

3. Spans are based on one fastener per clip into 3/16" support steel.

4. Spans may be further restricted dependent on color, thermal bow and thermal stress.

5. Consult CENTRIA for conditions not conforming to these notes.

THE COMPLETE WALL SYSTEM

University of Cincinnati Dorms Cincinnati, OH

Architect Morphosis Santa Monica, CA with KZF Design, Inc.Cincinnati, OH

FORMAWALL®


DIMENSION SERIES

736

CENTRIA.com

BUILDING CODE APPROVALSFIRE TESTS• Tunnel Test, ASTM E84;

a. Flame Spread 25 max.,b. Smoke Developed 450 max.

• UL Room Corner Test, UL 1715

• Factory Mutual Approval:FM 4880; 50’ High Large Scale Corner Test for Unlimited Height Approval for Walls, Roofs & Ceilings

• SwRI: Multistory Fire Test, NFPA 285(ISMA)

• ASTM D2015; BTU Content Test

• ASTM D1929; Ignition Properties

• UL Fire Wall Designs: 1 hr, 2 hr, 3 hr, U017, U617, U645, U605

SPECIAL APPROVALS:• Dade County (Missile Impact Resistance)

• New York City MEA 330-05-M

Consult CENTRIA for test reports.

NC State UniversityMedia Center:

Carter-Finley StadiumRaleigh, NC

ArchitectCorley Redfoot Zack

Chapel Hill, NC

FORMAWALL®


DIMENSION SERIES

836

C/S SUNSHADES

CENTRIA and Construction Specialties, Inc. (C/S Group) join forces to provide a wide selection of sunshades, engineered for seamless and thermally isolated integration with Formavuewindows and Dimension Series panels.

DURACAST® TEXTURED FINISH SYSTEM

Dimension Series panels coated with CENTRIADuracast finish, which uses a silica aggregate,provides a rugged, natural look. Duracast isavailable in eight natural earthtones and comeswith an exclusive 20-year warranty. Standardsteep-sloped joint shown.

FORMAVUE® WINDOWS

Five distinct styles of Formavue windows integrateseamlessly with Dimension Series panels andaccommodate a variety of fenestrations and construction types.

THE COMPLETE WALL SYSTEM

FORMAWALL®


DIMENSION SERIES

936

CENTRIA.com

C/S LOUVERS

CENTRIA and C/S Group also provide a full line of fixed, drainable, and storm-resistant louversengineered for seamless integration with Dimension Series panels.

STAINLESS STEEL

Choice of:• No. 2B – A bright, cold rolled,

unpolished finish, or

• No. 4 – A brushed finish

• Embossed, smooth or striated

FORMAWALL®


GRAPHIX SERIES

1036

CENTRIA makes the multi-panel design you envision become

real with Graphix Series™* – the newest addition to the

Formawall® family of products.

Imagine a single wall panel, made to look like 12 smaller

panels. Graphix Series’ unique segmented construction makes

this effect easy and economical. Best of all, you get to choose

how a wall panel is segmented along its length for unlimited

combinations of new design possibilities.

Segmented joints are treated to match actual joint

Rainscreen vented, pressure-equalizedand drainable joinery with concealedsealant prohibits water penetration

Insulating foam core, factory foamed-in-place,provides a thermally efficient exterior wall in either 2” or 3” thickness

Durable metal skins provideimpact resistance, strengthfor increased span capability and a built-invapor barrier

High performance coatings offer long-term performance, minimal maintenance and excellent color selection for your building’s exterior

Concealed clips and fasteners provide a sleek exterior appearancewith proven long-term performance

Optional reveals of varying widths

Placement of segments arespecified by designer

Actual Joint

*Patent Pending

LIMITED ONLY BY WHERE YOU DRAW THE LINEFORMAWALL® GRAPHIX SERIES™

Graphix Series panels can be segmented as frequently as every 12” and can be installed both vertically and horizontally.

Distinguish your design further by adding panel topanel reveals of varying widths – from 1/2” to 6”.

Customization continues as you select panel finishes, with enough options that your Graphix Series design may never be duplicated.

CENTRIA offers advanced coating systems that provide outstanding durability and corrosion resistance – available in over 70 standard colors, including micas and metallics, and unlimited custom colors.

Formawall Graphix Series is a single-componentwall system – a steel face and liner, using foamedin place CFC-free foam insulation. Panels are joinedwith CENTRIA’s proven vented and dry-sealed rainscreen joinery. The result is the most advancedthermal and moisture protection available.

Combined with Formawall’s integrated componentsincluding windows, louvers and sunshades, it’s all you need to build the complete wall in any climate.

FORMAWALL®


GRAPHIX SERIES

1136


The King’s Daughters Medical Office BuildingPortsmouth, OH

ArchitectTanner Stone Architects

Portsmouth, OH

Factory foam-insulated architectural wall panel system

SUBSTRAT E & CORE

• Standard – 22/26 gage G-90 galvanized steel face andliner with CFC-free polyurethane or polyisocyanuratefoam-insulated core

• Optional gages available – consult CENTRIA

J O I N ERY

• Horizontal oriented panel – Rainscreen, pressure-equalized and drainable joinery, 1/2” nom. joint – standard

• Vertical oriented panel – Double tongue-and-groove,1/8” nom. joint – standard

• Segmented joint – 5/8”x3/4” deep recess with factory applied black gasket, standard

– Max. segments per panel – 12

– Min. length of segment – 1’


• Exterior – Non-directional embossed

– Smooth flat

• Interior – Non-directional embossed planked or flat

– Smooth planked

COAT I NGS AND CO LORS

• Advanced Fluorofinish PVDF, metallic, and mica colorcoating systems arre available in over standard andcustom colors


• Duracast® a natural appearing textured finish

PANE L W ID TH

• Standard – 24”, 30”, 36”

• Custom – 10” to 40”

PANE L L ENGTH

• 20’ max.

PANE L TH I CKNESS

• 2” standard

• 3” consult CENTRIA

“ R ” VA LU E



R-Values are based on ASTM C236 and C518 testing.Air films are included.

CENTRIA.com

FORMAVUE®

INTEGRATEDWINDOW SYSTEMS

1236

FORMAVUE®

CENTRIA Formavue window systems are designed

to integrate with Formawall Dimension Series panels

resulting in a high performance window/panel interface.

These window systems are attractive, weather-resistant

and feature a standard thermal break. They eliminate

problems of coordinating window and metal

panel intersections.

Exterior System Window Descriptions Sightlines

FV 100 Vertical Panels with Spandrel Supports 3”Strip window applications and punched windows with single lite, and stacked glass options. Full and vertical structural glazed mullions.

FV 200 Horizontal Panels with Spandrel Supports 3”Strip window applications and punched windows with single lite, and stacked glass options. Full and vertical structural glazed mullions.

FV 300 Horizontal Panels with Steel or Aluminum Thru-Tube Supports 3”Strip window applications and punched windows with single lite, and stacked glass options. Full and vertical structural glazed mullions.

FV 400 Horizontal Panels with Steel or Aluminum Thru-Tube Supports 2-1/2”Strip window applications and punched windows with single lite, and stacked glass options. Full and vertical structural glazed mullions. Exterior pressure bar glazing with snap-on covers. Unique integral gutter at head is standard.

FV 500 Horizontal Panels with Spandrel Supports for Punched Windows 3”Horizontal Panels with Thru-Tube Supports for Strip WindowsShop assembled frames for faster installation. Single lite, and stacked glass options, full mullions.

All systems are designed to accept 1” insulating glass.

FORMAVUE® INTEGRATED WINDOW SYSTEMS

Baptist Hospital Pedestrian BridgeNashville, TN

Architect Gresham Smith and PartnersNashville, TN

North East Middle SchoolBethlehem, PA

ArchitectSpillman FarmerBethlehem, PA

FORMAVUE®

INTEGRATED WINDOWSYSTEMS

1336

CENTRIA.com

Window system eliminates receptor extrusions, provideseasier and faster jobsite coordination, and is system tested to ensure superior weather resistance

Inside or outside glazing options allow easier accessfor installation or glass replacement

Advanced, thermally-improved design features a thermal barrier which minimizes through-metal conductivity, while maintaining structural integritytested CRF value of 65

F V 4 0 0

V E R S AW A L L

Stockton Event CenterStockton, CA

Architect360˚ ArchitectureKansas City, MO

VERSAWALL®

FACTORY FOAMEDWALL PANEL

SYSTEM

1436

Museum of FlightMilitary Gallery, Seattle, WA

ArchitectNBBJSeattle, WA

VERSAWALL®

Module Gage No. Load - psf(in.) F/L Spans 20 30 40 50

36 26/26 1 11-11* 8-0 6-0 4-92 12-0* 9-9 7-5 5-93 12-0* 9-9 7-3 5-9

36 22/22 1 12-0* 10-3 7-8 6-22 12-0* 9-10 7-7 6-23 12-0* 10-10 8-2 6-7

1. L/120 deflection criteria.2. 3/16” steel supports with 1 fastener per clip.3. For dark colored panels, further panel length and restrictions

may be required due to thermal stress. Consult CENTRIA.* Spans are restricted by thermal stress and bow considerations.

VERSAWALL 2.00ALLOWABLE SPANS – FT-IN

Factory foam-insulated wall and roof panel system

SUBSTRAT ES

• Standard – 26/26 G-90 galvanized steel face and liner with CFC-free foam insulated core

• Optional gages available, consult CENTRIA

J O I N ERY

• Double tongue-and-groove joinery with factory-applied air and vapor seal


• Versawall Exterior – Non-directional embossing,striated, planked or flat

• Versapanel Exterior – Non-directional embossing, planked or flat

• Interior –Non-directional embossing, planked

PANE L W ID TH

• Versawall – 30”, 36”• Versapanel – 36”

PANE L L ENGTH

• 6’ to 40’ standard (for flat exterior consult CENTRIA)• 48’ max. consult CENTRIA

PANE L TH I CKNESS

• Versawall – 2”, 2-3/4”, 4” nom.• Versapanel – 1-3/4”, 2-1/2”, 4”

“ R ” VA LU E

Versawall

• 2” depth – R15• 2-3/4” – R22• 4” – R30

Versapanel

• 1-3/4” – R14• 2-1/2” – R20• 4” – R31

• CFC-free foam insulation

• May be installed in any type of weather, faster and easier

• Increased span capability reduces support steel requirements

• Lightweight panels lower installation costs

• Concealed fasteners provide a clean, uninterrupted surface

• Outstanding weather resistance due to doubletongue-and-groove joinery

• Thermal break between face and liner saves energy

• Versawall can be used for interior partitions

• Available with factory-formed sheet metal flashing or extruded aluminum trim

• Versapanel’s snap-on cap conceals joint for a seamless appearance (required on roofs)

• Versawall – cradle to cradle certification

US Navy WarehouseNorfolk, VA

ArchitectWhitman Requardt

Baltimore, MD

VERSAPANEL®

FACTORY FOAMED WALL & ROOF SYSTEM

1536


VERSAPANEL®

CENTRIA.com

Gage No. Fast.† Load - psfFace/Liner Spans Clip 20 25 30 35 40 45 50 55 60

26/26 1 1 12-0* 12-0 10-0 8-7 7-6 6-8 6-0 5-5 5-02 1 12-0* 11-9* 10-0 8-7 7-7 6-10 6-3 5-9 5-33 1 13-4 13-0 10-10 9-4 8-2 7-3 6-7 6-0 5-6

1.†Fastener capacity is based on the use of minimum 3/16” support steel substrate.

2. Spans are limited to a maximum deflection is L/120.3. Triple span of 13’-4” is limited by 40’-0” maximum panel length.4. Consult CENTRIA for additional allowable spans.* Spans may be increased dependent on color, thermal bow and thermal stress.

VERSAPANEL 2.50WIND LOAD SPANS – FT-IN

V E R S A PA N E L

R-Values are based on ASTMC236 and C518 testing. Air films are included.

COAT I NGS & CO LORS

• Advanced Fluorfinish PVDF, metallic and mica colorcoatings in standard & custom colors


• Versacor – premium high build coating for corrosionresistance

• Duracast® – a natural appearing textured finish

Commerce BankUniversity

Mt. Laurel, NJ

ArchitectInterArch

Philadelphia, PA

FORMABOND®

METALCOMPOSITE

WALL SYSTEM

1636

FORMABOND®

CENTRIA revolutionizes the thin aluminum composite panel

industry with FormaBond. Unlike traditional ACM – that’s made

through lamination, then fabricated into panels by a second

party – FormaBond is manufactured entirely by CENTRIA using

a proprietary reaction injection molding process. The result

is a newly patented, stronger, flatter and finished ACM panel,

complete with formed, pressure-equalized joinery.

*Patent No.: US 7,007,433 B2

METAL COMPOSITE WALL SYSTEM*

Patented dry joinery eliminates

wet seals and provides optimum

venting to allow wall cavities to

dry effectively while prohibiting the

entry of rainwater, thus reducing

the chance of entrapped moisture,

material degradation and mold.

Specify FormaBond and elevate

the quality and integrity of your

next ACM wall system.

Pre-formed aluminum composite architectural wallpanel system

SUBSTRAT E & CORE

• Metal – 0.032” nominal aluminum face and liner

• Core – Highly cross-linked polymer that meets firecore requirements

• 8mm sheet thickness (6mm optional)

• Smooth – flat ACM panel system

J O I N ERY

All dry construction that is pressure equalized and provides ventilation to the inner wall cavity

• Both rout and return and integrated joinery available


• Smooth or Embossed

PANE L W ID TH

• Up to 60"

PANE L L ENGTH

• Up to 180"

VAR I AB L E R EV EA LS

• From 1/2” to 6” in 1/2” increments. May also be colorized

COAT I NGS

• Available in micas, metallics, and Fluorofinish

• Provides super-flat, sharp, and crisp exterior sight lines

• Value-added dry seal installation

• Low maintenance and no costly re-caulking

• Pressure-equalized rainscreen with no water entrybehind the screen at 15 psf.

• Ventilated cavity along each horizontal joint

• Easy integration with CENTRIA Formavue Windows,C/S Louvers and Sunshades

• Excellent bond strength and superior impact resistance

• Proprietary polymeric core meets fire code requirements for all building heights

• 8mm sheet thickness passes the large and small missile impact test required in many coastal regions with no plywood backing

Lincoln Square CenterBellevue, WA

Architect Sclater Partner Architects

Seattle, WA

FORMABOND®

METALCOMPOSITEWALL SYSTEM

1736


CENTRIA.com

Smooth or EmbossedSurface Finish

I N T E G R AT E D J O I N E R Y R O U T & R E T U R N J O I N E R Y

BiRite Food Distribution

Brisbane, CA

ArchitectMcGinnis ChenAssociates, LLP

San Francisco, CA

PROFILESERIES

WALL SYSTEMS

CONCEALED FASTENERPROFILES

1836

PROFILE SERIESCENTRIA took a close look at how architects use traditional single-skin profile panels in

contemporary design and re-engineered the Profile Series system to help them achieve the

aesthetics they desire easily and economically.

WITH CENTRIA PROFILE SERIES you get a full metal palette of both concealed and exposed

fastener panels, including the six new Concept Series® concealed fastener panels based

on a classic asymmetrical form. This broad selection provides thousands of combinations

of articulation, shadows and sight lines, along with a complete line of design, finish,

integration, special systems and detail options.

C S - 2 6 0

C S - 2 1 0

C S - 2 0 0

SUBSTRAT ES

• Standard 24-18 gage G-90 galvanized steel

• Galvalume® steel, aluminum or stainless steel – optional

• Smooth or embossed surface texture

CONCEP T S ER I E S PRO F I L E S

• Lengths up to 30’

• Concealed clips and fasteners

• Stand-off clips provides ventilation cavity and continuous drain plane behind panel

• Horizontal or vertical wall installation

• Common joint design permits multiple profile integration

• Concealed extended leg option

• Panels may be installed vertically and horizontally*

• Common lock joint allows panels to be mixed freelyfor custom-like aesthetics

• Concealed clips and fasteners

• Cost effective with a clean, unbroken appearanceallowing for interesting visual effects.

• Excellent for new construction and retrofit projects

• All-weather installation capability shortens installation time, permits fast-track scheduling

• Panels are available with stucco-embossed or smooth finishes

• Concealed extended leg option

* Horizontal applications require a backup air and water barrier system

UCSF Mission Bay HousingSan Francisco, CA

ArchitectFisher-Friedman Associates (Emeryville, CA)

in partnership with Skidmore, Owings & Merrill LLPSan Francisco, CA

PROFILESERIES

WALL SYSTEMS

CONCEPT SERIES®


1936

FEATURES & BENEFITS

DESCRIPTION

CENTRIA.com

CENTRIA CONCEPT SERIES single-skin

panels combine concealed fasteners

with a wide range of profiles based

upon a single theme – a dynamic

asymmetrical form.

Concept Series panels are available

for insulated or uninsulated

field-assembled wall applications.

C O N C E A L E DC L I P FastenerStandard

C O N C E A L E DE X T E N D E D Fastener LegOptional

C S - 6 1 0

C S - 6 2 0

C S - 6 6 0

CONCEPT SERIES®

Knapp ElementaryGrand Rapids, MI

ArchitectKingscott Assoc.

Kalamazoo, MI

PROFILESERIES

WALL SYSTEMS

IW SERIES®


2036

FEATURES & BENEFITS

I W - 1 0 A I W - 1 1 A I W - 1 3 A I W - 1 4 A I W - 2 0 A

• No exposed panel fasteners

• Cost effective, with a clean, unbroken appearance

• Most panels are interchangeable because of the common lock-joint design which allows for interesting visual effects

• Excellent for new construction and retrofit projects

• All-weather installation capability shortens installation time, permits fast-track scheduling

• Panels are available with stucco-embossed or smooth finishes and in flush, ribbed, striatedand stepped profiles

CONCEALED FASTENER PROFILES

I W - 2 1 A

IW SER I E S PRO F I L E S



• Lock-joint design of IW-10A through IW-41A makespanels interchangeable

“Oil canning” is an inherent part of light gage cold-formed metal products, particularly thosewith broad flat areas. CENTRIA takes every precaution, as defined by MCA, to minimize the effects of oil canning. Lack of flatness orwaviness due to oil canning is not sufficientcause for rejection of material.

DESCRIPTION

PROFILE SERIES IW SERIES

2136

CENTRIA.com

I W - 3 0 A I W - 3 1 A I W - 4 0 A I W - 4 1 A I W - 6 0 A

PROFILESERIES

WALL SYSTEMS

IW SERIES®


B R 5 - 3 6

S T Y L E - R I B

T R 4 - 3 6E C O N O L A P - 1 / 2 ”

E C O N O L A P - 3 / 4 ”

Walgreens Distribution CenterAlliance Industrial ParkAnderson County, SC

ArchitectKorte Construction CompanySt. Louis, MO

PROFILESERIES

WALL & ROOF SYSTEMS

EXPOSED FASTENERPROFILES

2236

FEATURES & BENEFITS

• Extremely versatile panels can be used as exterior or interior walls, roofs, liners and soffits

• Ribs can be run either horizontally* or vertically

• May be insulated to meet many levels of thermal protection

• Excellent negative wind load properties

• All-weather installation capability minimizes delays, permits fast-track scheduling

• Panels are available in stucco-embossed or smooth finishes

* Horizontal applications require a backup air and water barrier system

EXPOSED FASTENER PROFILES

S U P E R - R I B

M R 3 - 3 6

PROFILE SERIES

EXPOSED FAS T EN ER PRO F I L E S


• Wall and roof installation


DESCRIPTION

Minimize heat loss or gain to conserve valuableenergy with CENTRIA liner panels

SUBSTRAT E

• 24-18 gage G-90 galvanized steel

PANE L W ID TH

• 24”

PANE L L ENGTH

• 30’-0” max.

PANE L TH I CKNESS / D EP TH O F R EV EA L

• L2 – 1-3/8”

• L2-2 – 2”

• L2-3 – 3”

• L-21A – 1-1/2”

• Incorporate liner panel, subgirts, varying thicknesses of noncombustible fiberglass insulationand any CENTRIA exposed fastener or concealed fastener panel

• “R” Values up to 20, depending upon insulation

• Provides a flush appearance to building interiors

• Perforated liner panels available for tested acousticalperformance


PROFILESERIES

WALL & ROOF SYSTEMS

LINER PANELS

2336

L-21A is a concealed fastener liner panel for usewith split-wall construction or when fastening fromthe inside is required. L-21A cannot be used as anexterior wall panel.

Finished Side

L 2 L 2 - 2 L 2 - 3 L - 2 1 A

CENTRIA.com

Stratton ANGMaintenance & FuelCell HangarsScotia, NY

ArchitectMorris Architect:Burns & McDonnellKansas City, MO

PROFILE SERIES LINER PANELS

PROFILESERIES

WALL & ROOF SYSTEMS

DESIGN OPTIONS

2436

PROFILE SERIESDESIGN OPTIONS

MICROL I N E™ EXTRUS IONS

MicroLine details incorporate aluminum extrusions designed to integrate visually andmechanically with CENTRIA profile panels. Slim 2” wide MicroLine extrusions make it asnap to trim and finish around windows and doors, inside or outside corners, and at thebase of walls; or to create clean vertical joints. MicroLine details enable you to replacewide obtrusive flashing and exposed fasteners with narrower, crisper and cleaner finishedlines, and can be finished to match or complement wall panels. Currently available forhorizontal IW Series, Style-Rib, BR5-36, Econolap 3/4” and TR4-36. MicroLine details are available for Concept Series profile in horizontal and vertical applications. SeparateMicroLine extrusions are available for horizontally erected IW-60A.

MICROSEAM® CORNERS

MicroSeam Corners use cutting edge structural bonding techniques to produce cornersthat appear virtually seamless. Manufactured from the same metal substrate coil as thepanels, MicroSeam corners employ no welding and no pop rivets. Available in CENTRIA’sfull palette of nearly 100 colors, including metallics. Like all CENTRIA panels, they arefully tested for performance. MicroSeam Corners are available on BR5-36, Econolap 3/4”,MR3-36, Style-Rib, Super-Rib, TR4-36, IW-60A, and all Concept Series profiles.

E COSCR E EN™ PER FORAT ED SCR E ENWAL L

CENTRIA offers exterior perforated screenwall panels using Econolap 3/4”, MR3-36, Style-Rib,and BR5-36 in 20 gage stainless steel and 0.040” painted aluminum. This unique fabrication provides a 10% to 40% open area for the effect of a translucent screen to control light, air movement and provide safety and security.

Perforated screenwalls can help blend industrial and other functional applications with thesurrounding communities.

Please consult CENTRIA for optional panels and perforation patterns. Paint finish not warranted in perforated panels.

E X T E R I O R PA N E L

L I N E R PA N E L

G Y P S U M B O A R D

I N S U L AT I O N

S U B G I R T S

G I R T S

F I R EWAL L SYS T EM

With the CENTRIA firewall system,layers of gypsum board between the exterior Profile panel and theinsulation and liner panel create UL one-hour through four-hourfirewalls based on ASTM E119fire tests.

PROFILESERIES

WALL & ROOF SYSTEMS

DESIGN OPTIONS

2536

CENTRIA.com

PRO F I L E LOUVERS

CENTRIA Profile Louvers come in gages, colors and finishes to match correspondingpanels and blend invisibly into a wall, eliminating visual breaks in site lines. ProfileLouvers are available for horizontal installation with BR5-36, Inverted BR5-36, MR3-36,Style-Rib or Super-Rib wall panels. Variable blade depths from 1 1/2” to 8” create freearea from 10% to 49% for air intake or exhaust.

CAP ® SYST EM

With the CENTRIA Curved Architectural Panel (CAP) System you can add curved designelements to your projects. Available in a wide selection of exposed fastener profiles,finishes and colors to match virtually any architectural, commercial or industrial application, CAP is ideal for canopies and awnings, roofing, fascia, walls, curved parapets,curved trim, column and beam wraps, miters and bullnoses – even custom shapes –where it can be used to add bold visual statements or innovative special effects.

CENTRIA fabricates CAP System panels from a variety of architectural panel profiles.CAP System panels are available in a number of finishes to match your application,and in the full CENTRIA color palette.

E X T E R I O R PA N E L

L I N E R PA N E L

I N S U L AT I O N

OTHER S YS T EMS

• Explosion Release

• RF Shielding

QU I E T WAL L™ SYS T EM

The CENTRIA Quietwall system helps you select a wall systemwith specific sound absorption or transmission loss values yourdesign requires – more economically and more efficiently.

S U B G I R T

LOAD TABLES

PROFILE SERIES

2636

LOAD TABLESPROFILE SERIES

CONCEPTSERIES® Wind Design 24 Gage 22 Gage 20 Gage 18 Gage

Load Limited No. Spans No. Spans No. Spans No. Spans

psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress n/a n/a n/a 5-10 5-10 6-6 6-8 6-8 7-6 8-4 8-4 9-3

Defl. n/a n/a n/a 4-8 6-3 5-9 5-0 6-9 6-2 5-9 7-9 7-2

30 Stress n/a n/a n/a 4-9 4-9 5-4 5-5 5-5 6-1 6-9 6-9 7-7

Defl. n/a n/a n/a 4-1 5-5 5-0 4-5 5-11 5-5 5-1 6-9 6-3

40 Stress n/a n/a n/a 4-2 4-2 4-7 4-9 4-9 5-3 5-10 5-10 6-7

Defl. n/a n/a n/a 3-8 4-11 4-7 4-0 5-4 4-11 4-7 6-2 5-8

50 Stress n/a n/a n/a 3-8 3-8 4-2 4-3 4-3 4-9 5-3 5-3 5-10

Defl. n/a n/a n/a 3-5 4-7 4-3 3-8 5-0 4-7 4-3 5-8 5-3

20 Stress n/a n/a n/a 8-3 8-3 9-3 9-3 9-3 10-5 11-2 11-2 12-5

Defl. n/a n/a n/a 5-8 7-7 7-0 6-1 8-2 7-6 6-10 9-2 8-5

30 Stress n/a n/a n/a 6-9 6-9 7-7 7-7 7-7 8-6 9-1 9-1 10-2

Defl. n/a n/a n/a 5-0 6-8 6-2 5-4 7-2 6-7 6-0 8-0 7-4

40 Stress n/a n/a n/a 5-10 5-10 6-7 6-7 6-7 7-4 7-10 7-10 8-10

Defl. n/a n/a n/a 4-6 6-1 5-7 4-10 6-6 6-0 5-5 7-3 6-8

50 Stress n/a n/a n/a 5-3 5-3 5-10 5-10 5-10 6-7 7-0 7-0 7-10

Defl. n/a n/a n/a 4-2 5-7 5-2 4-6 6-0 5-7 5-0 6-9 6-3

20 Stress 8-6 8-6 9-6 9-9 9-9 10-11 10-10 10-10 12-1 12-8 12-8 14-2

Defl. 5-9 7-9 7-2 6-4 8-5 7-9 6-8 9-0 8-3 7-6 10-0 9-3

30 Stress 6-11 6-11 7-9 8-0 8-0 8-11 8-10 8-10 9-10 10-4 10-4 11-7

Defl. 5-1 6-9 6-3 5-6 7-4 6-9 5-10 7-10 7-3 6-6 8-9 8-1

40 Stress 6-0 6-0 6-9 6-11 6-11 7-9 7-8 7-8 8-7 9-0 9-0 10-0

Defl. 4-7 6-2 5-8 5-0 6-8 6-2 5-4 7-2 6-7 5-11 7-11 7-4

50 Stress 5-4 4-11 5-7 6-2 6-2 6-11 6-10 6-10 7-8 8-0 8-0 9-0

Defl. 4-3 5-8 5-3 4-8 6-3 5-9 4-11 6-7 6-1 5-6 7-4 6-9

20 Stress n/a n/a n/a 7-5 7-5 8-3 8-4 8-4 9-4 9-10 9-10 10-11

Defl. n/a n/a n/a 5-3 7-0 6-6 5-8 7-7 7-0 6-4 8-6 7-10

30 Stress n/a n/a n/a 6-0 6-0 6-9 6-9 6-9 7-7 8-0 8-0 8-11

Defl. n/a n/a n/a 4-7 6-2 5-8 4-11 6-7 6-1 5-7 7-5 6-10

40 Stress n/a n/a n/a 5-3 5-3 5-10 5-11 5-11 6-7 6-11 6-11 7-9

Defl. n/a n/a n/a 4-2 5-7 5-2 4-6 6-0 5-6 5-1 6-9 6-3

50 Stress n/a n/a n/a 4-8 4-8 5-3 5-3 5-3 5-11 6-2 6-2 6-11

Defl. n/a n/a n/a 3-10 5-2 4-9 4-2 5-7 5-2 4-8 6-3 5-10

20 Stress n/a n/a n/a 7-5 7-5 8-3 8-6 8-6 9-6 10-0 10-0 11-2

Defl. n/a n/a n/a 5-3 7-0 6-6 5-8 7-7 7-0 6-7 8-10 8-1

30 Stress n/a n/a n/a 6-1 6-1 6-9 6-11 6-11 7-9 8-2 8-2 9-1

Defl. n/a n/a n/a 4-7 6-2 5-8 5-0 6-8 6-2 5-9 7-8 7-1

40 Stress n/a n/a n/a 5-3 5-3 5-10 6-0 6-0 5-10 7-1 7-1 7-11

Defl. n/a n/a n/a 4-2 5-7 5-2 4-6 6-1 5-7 5-3 7-0 6-5

50 Stress n/a n/a n/a 4-8 4-8 5-3 5-4 5-4 6-0 6-4 6-4 7-0

Defl. n/a n/a n/a 3-10 5-2 4-9 4-2 5-7 5-2 4-10 6-6 6-0

20 Stress 8-4 8-4 9-4 9-7 9-7 10-9 10-7 10-4 11-9 12-4 10-4 11-9

Defl. 5-9 7-8 7-1 6-3 8-5 7-9 6-8 8-11 8-3 7-5 9-11 9-1

30 Stress 6-10 6-10 7-8 7-10 7-11 8-9 8-8 8-8 9-8 10-1 10-1 11-4

Defl. 5-0 6-9 6-2 5-6 7-4 6-9 5-10 7-10 7-2 6-5 8-8 8-0

40 Stress 5-11 5-11 6-7 6-9 6-9 7-7 7-6 7-6 8-4 8-9 8-9 9-9

Defl. 4-7 6-1 5-7 5-0 6-8 6-2 5-4 7-1 6-7 5-10 7-10 7-3

50 Stress 5-3 5-2 5-10 6-1 5-8 6-5 6-8 6-1 6-11 7-10 7-1 8-0

Defl. 4-3 5-8 5-3 4-7 6-2 5-8 4-11 6-7 6-1 5-5 7-3 6-9

C S - 2 1 0

C S - 2 6 0

C S - 6 1 0

C S - 6 2 0

C S - 6 6 0

C S - 2 0 0

C S - 2 1 0

C S - 2 0 0

C S - 6 6 0

C S - 6 2 0

C S - 6 1 0

C S - 2 6 0

The maximum allowable spans in this table represent a significant update based on the latest IBC and ASCE7 codes, which no longer permit a 33% increase in allowable stress due to wind. Therefore, some values may be less than previously published by CENTRIA. Contact CENTRIA for additional information.

1. Spans should be limited by the lower of stress, calculated as 0.6 Fy or deflection@ L/180.

2. For deflection @ L/120, multiply the tabulated L/180 Defl. span by 1.144.

3. Wind span tables are based on using 1/4’’-14 fasteners with 5/8’’ – combinationwashers fastened into 3/16” minimum thickness supports indicated on the tables.

4. Wind span tables are based on single skin with 1 fastener per panel clip per support.

5. *Consult CENTRIA for all 18 gage product lead times.

6. Oil canning within industry standard guidelines as defined by MCA is not a causefor rejection.

7. These tables apply to clip “CS” Panels for Load Tables for Extended Lag Panels, consult CENTRIA

WIND LOAD SPAN – FT-IN – WALL PANELS

LOAD TABLES

PROFILE SERIES

2736

CENTRIA.com

Wind Design 24 Gage 22 Gage 20 Gage 18 Gage


psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress 7-2 7-2 8-0 8-6 8-6 9-6 9-10 9-10 11-0 12-5* 12-5* 13-10*

Defl. 6-6 8-9* 8-0 7-3 9-9 8-11 7-11 10-7 9-9 9-0 12-1* 11-2

30 Stress 5-10 5-10* 6-6* 6-11 6-11 7-9 8-0 8-0 8-11 10-2 10-2 11-4

Defl. 5-8 7-7* 7-0* 6-4 8-6* 7-10 6-11 9-3 8-6 7-11 10-7 9-9

40 Stress 5-1 5-1* 5-8* 6-0 6-0* 6-9 6-11 6-11 7-9 8-9 8-9 9-10

Defl. 5-2 6-11* 6-5* 5-9 7-9* 7-1* 6-3 8-5* 7-9 7-2 9-7 8-10

50 Stress 4-6 4-6* 5-1* 5-5 5-5* 6-0* 6-2 6-2 6-11 7-10 7-10 8-9

Defl. 4-10 6-5* 5-11* 5-4 7-2* 6-7* 5-10 7-9* 7-2 6-8 8-11* 8-3

20 Stress 7-0 7-0 7-10 8-4 8-4 9-3 9-6 9-6 10-8 12-0 12-0 13-5*

Defl. 6-8 8-11* 8-3 7-5 9-11 9-2 8-1 10-10 10-0 9-4 12-6* 11-6

30 Stress 5-9 5-9* 6-5* 6-9 6-9 7-7 7-9 7-9 8-9 9-9 9-9 10-11

Defl. 5-10 7-10* 7-2* 6-6 8-8* 8-0 7-1 9-6 8-9 8-2 10-11 10-1

40 Stress 4-11 4-11* 5-6* 5-10 5-10 6-7 6-9 6-9 7-6 8-6 8-6 9-6

Defl. 5-4 7-1* 6-6* 5-11 7-11* 7-3* 6-5 8-8* 7-11 7-5 9-11 9-2

50 Stress 4-5 4-5* 4-11* 5-3 5-3* 5-10* 6-0 6-0 6-9 7-7 7-7 8-6

Defl. 4-11 6-7* 6-1* 5-6 7-4* 6-9* 6-0 8-0* 7-5* 6-11 9-3* 8-6

20 Stress n/a n/a n/a 8-5 8-5 9-5 9-9 9-9 10-11 12-3* 12-3* 13-9*

Defl. n/a n/a n/a 7-4 9-10 9-1 8-0 10-9 9-11 9-2 12-4* 11-4

30 Stress n/a n/a n/a 6-11 6-11 7-8 7-11 7-11 8-11 10-0 10-0 11-3

Defl. n/a n/a n/a 6-5 8-7* 7-11 7-0 9-4 8-8 8-0 10-9 9-11

40 Stress n/a n/a n/a 6-0 6-0 6-8 6-11 6-11 7-8 8-8 8-8 9-9

Defl. n/a n/a n/a 5-10 7-10* 7-2* 6-4 8-6* 7-10 7-3 9-9 9-0

50 Stress n/a n/a n/a 5-4 5-4* 6-0* 6-2 6-2 6-11 7-9 7-9 8-8

Defl. n/a n/a n/a 5-5 7-3* 6-8* 5-11 7-11* 7-3* 6-9 9-1* 8-4

20 Stress n/a n/a n/a 8-5 8-5 9-5 9-9 9-9 10-11 12-4* 12-4* 13-9*

Defl. n/a n/a n/a 7-3 9-9 9-0 7-11 10-8 9-10 9-1 12-3* 11-3

30 Stress n/a n/a n/a 6-11 6-11 7-9 8-0 8-0 8-11 10-1 10-1 11-3

Defl. n/a n/a n/a 6-4 8-6* 7-10 6-11 9-4 8-7 8-0 10-8 9-10

40 Stress n/a n/a n/a 6-0 6-0 6-8 6-11 6-11 7-9 8-9 8-9 9-9

Defl. n/a n/a n/a 5-9 7-9* 7-2* 6-4 8-5* 7-9 7-3 9-8 8-11

50 Stress n/a n/a n/a 5-4 5-4* 6-0* 6-2 6-2 6-11 7-10 7-10 8-9

Defl. n/a n/a n/a 5-4 7-2* 6-8* 5-10 7-10* 7-3 6-9 9-0* 8-3

20 Stress 8-3 8-3 9-3 9-7 9-7 10-9 10-10 10-10 12-2 12-7 12-7 14-0

Defl. 6-1 8-2 7-6 6-7 8-10 8-2 7-1 9-6 8-9 7-11 10-7 9-9

30 Stress 6-9 6-9 7-6 7-10 7-10 8-9 8-10 8-10 9-11 10-3 10-3 11-6

Defl. 5-4 7-1 6-6 5-9 7-9 7-2 6-2 8-3 7-8 6-11 9-3 8-6

40 Stress 5-10 5-10 6-6 6-10 6-10 7-7 7-8 7-8 8-7 8-11 8-11 9-11

Defl. 4-10 6-5 5-11 5-3 7-0 6-6 5-7 7-6 6-11 6-3 8-5 7-9

50 Stress 5-3 5-3 5-10 6-1 6-1 6-10 6-10 6-10 7-8 7-11 7-11 8-11

Defl. 4-6 6-0 5-6 4-10 6-6 6-0 5-3 7-0 6-5 5-10 7-9 7-2

I W - 2 0 AI W - 2 1 A †

I W - 3 0 AI W - 3 1 A

I W - 4 0 AI W - 4 1 A

I W - 6 0 A †

I W - 1 0 AI W - 1 1 AI W - 1 3 A†**I W - 1 4 A

The maximum allowable spans in this table represent a significant update based on the latest IBC and ASCE7 codes, which no longer permit a 33% increase in allowable stress due to wind. Therefore, some values may be less than previously published by CENTRIA.Contact CENTRIA for additional information.

IW SERIES

I W - 1 0 A

I W - 1 1 A

I W - 1 3 A

I W - 1 4 A

I W - 2 0 A

I W - 2 1 A

I W - 3 1 A

I W - 4 0 A

I W - 4 1 A

I W - 6 0 A

I W - 3 0 A

1. Spans are limited by the lower of of the two values listed forstress and deflection. Stress is based on 0.6 x Fy. Deflection is based on L/180.


3. Wind span tables are based on using 1/4"-14 fasteners with 5/8" ø combination washers fastened into 3/16” minimum thickness supports.

4. Wind span tables for IW-60A are based on single skin with oneclip with one screw per panel per support into 3/16” supports.

5. Oil canning within industry standard guidelines as defined by MCA is not a cause for rejection.

† IW-13A, IW-21A and IW-60A are the only panels available in 24 gage.

* Spans marked with an asterisk require negative load clips (part NLC-1) at each support.

** IW-13A is not available in 18 gage.

WIND LOAD SPAN – FT-IN – WALL PANELS

LOAD TABLES

PROFILE SERIES

2836

LOAD TABLESPROFILE SERIES

The maximum allowable spans in this table represent a significant update based on the latest IBC and ASCE7 codes, which no longer permit a 33% increasein allowable stress due to wind. Therefore, some values may be less than previously published by CENTRIA. Contact CENTRIA for additional information.

W A L L

R O O F

W A L L

R O O F

WIND LOAD SPAN – FT-IN – WALL AND ROOF PANELS



psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress n/a n/a n/a 21-5 21-5 24-0 23-6 23-6 26-3 27-2 27-2 30-5

Defl. n/a n/a n/a 20-4 27-2 25-1 21-8 29-0 26-9 23-11 32-1 29-7

30 Stress n/a n/a n/a 17-6 16-0 18-2 19-2 18-11 21-5 22-2 22-2 24-10

Defl. n/a n/a n/a 17-9 23-9 21-11 18-11 25-4 23-4 20-11 28-0 25-10

40 Stress n/a n/a n/a 15-2 12-0 13-8 16-7 14-2 16-1 19-3 17-8 20-1

Defl. n/a n/a n/a 16-1 21-7 19-11 17-2 23-0 21-2 19-0 25-5 23-5

50 Stress n/a n/a n/a 13-7 9-7 10-11 14-10 11-4 12-10 17-2 14-2 16-1

Defl. n/a n/a n/a 14-11 20-0 18-6 15-11 21-4 19-8 17-8 23-7 21-9




psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress 12-0 12-0 13-5 14-7 14-7 16-3 16-6 16-6 18-5 19-11 19-11 22-3

Defl. 14-1 18-10 17-4 15-9 21-1 19-5 17-0 22-9 21-0 19-1 25-7 23-7

30 Stress 9-9 9-9 10-11 11-11 11-11 13-3 13-6 13-6 15-1 16-3 16-3 18-2

Defl. 12-3 16-6 15-2 13-9 18-5 17-0 14-10 19-11 18-4 16-8 22-4 20-7

40 Stress 8-6 7-9 8-10 10-3 10-3 11-6 11-8 11-8 13-1 14-1 14-1 15-9

Defl. 11-2 15-0 13-9 12-6 16-9 15-5 13-6 18-1 16-8 15-2 20-4 18-9

50 Stress 7-7 6-3 7-1 9-2 9-2 10-3 10-5 10-5 11-8 12-7 12-7 14-1

Defl. 10-4 13-11 12-10 11-7 15-6 14-4 12-6 16-9 15-6 14-1 18-10 17-4

36"

7.2"Exterior

1-1/2"

W A L L

R O O F




psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress 9-6 9-6 10-8 10-9 10-9 12-1 11-11 11-11 13-4 14-0 14-0 15-8

Defl. 8-5 11-4 10-5 9-4 12-6 11-6 10-2 13-7 12-6 11-7 15-6 14-4

30 Stress 7-9 7-9 8-9 8-10 8-10 9-10 9-9 9-9 10-11 11-5 11-5 12-10

Defl. 7-5 9-11 9-1 8-2 10-11 10-1 8-10 11-10 10-11 10-1 13-7 12-6

40 Stress 6-9 6-9 7-7 7-7 7-7 8-6 8-5 8-5 9-5 9-11 9-11 11-1

Defl. 6-8 9-0 8-3 7-5 9-11 9-2 8-1 10-9 9-11 9-2 12-4 11-4

50 Stress 6-0 6-0 6-9 6-10 6-10 7-7 7-7 7-7 8-5 8-10 8-10 9-11

Defl. 6-3 8-4 7-8 6-11 9-3 8-6 7-6 10-0 9-3 8-6 11-5 10-7

W A L L

R O O F




psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress 9-3 9-3 10-4 10-9 10-9 12-1 12-2 12-2 13-7 14-9 14-9 16-6

Defl. 8-7 11-5 10-7 9-4 12-7 11-7 10-1 13-6 12-6 11-4 15-3 14-1

30 Stress 7-7 7-7 8-5 8-10 8-10 9-10 9-11 9-11 11-1 12-0 12-0 13-5

Defl. 7-6 10-0 9-3 8-2 11-0 10-1 8-10 11-10 10-11 9-11 13-4 12-3

40 Stress 6-7 6-7 7-4 7-7 7-7 8-6 8-7 8-7 9-7 10-5 10-5 11-8

Defl. 6-9 9-1 8-4 7-5 9-11 9-2 8-0 10-9 9-11 9-0 12-1 11-2

50 Stress 5-10 5-10 6-7 6-10 6-10 7-7 7-8 7-8 8-7 9-4 9-4 10-5

Defl. 6-4 8-5 7-9 6-11 9-3 8-6 7-5 10-0 9-2 8-5 11-3 10-4

1. Spans are limited by the lower of of the two values listed for stress anddeflection. Stress is based on 0.6 x Fy. Deflection is based on L/120.


3. Three Fasteners per panel for Econolap 1/2” and 3/4”, and four fastenersper panel for TR4-36

4. All panels must be ordered as either “Roofing” or “Siding”.

5. For more detailed load span information, consult www.centria.com.

SUPER-RIB

MR3-36

BR5-36

STYLE-RIB

LOAD TABLES

PROFILE SERIES

2936

CENTRIA.com

TR4-36

W A L L R O O F

ECONOLAP 1/2”

W A L L R O O F



psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress 8-5 8-5 9-4 9-5 9-5 10-6 10-4 10-4 11-6 12-0 12-0 13-5

Defl. 8-8 11-7 10-8 9-4 12-6 11-6 9-11 13-4 12-3 11-0 14-9 13-7

30 Stress 6-10 6-10 7-8 7-8 7-8 8-7 8-5 8-5 9-5 9-9 9-9 10-11

Defl. 7-7 10-2 9-4 8-2 10-11 10-1 8-8 11-8 10-9 9-7 12-10 11-10

40 Stress 5-11 5-11 6-8 6-8 6-8 7-5 7-4 7-4 8-2 8-6 8-6 9-6

Defl. 6-10 9-3 8-6 7-5 9-11 9-2 7-11 10-7 9-9 8-9 11-8 10-9

50 Stress 5-4 5-4 5-11 5-11 5-11 6-8 6-6 6-6 7-4 7-7 7-7 8-6

Defl. 6-5 8-7 7-11 6-11 9-3 8-6 7-4 9-10 9-1 8-1 10-10 10-0



psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress 5-2 5-2 5-9 5-9 5-9 6-5 6-3 6-3 7-0 7-1 7-1 7-11

Defl. 4-4 5-10 5-4 4-8 6-3 5-9 5-0 6-8 6-2 5-5 7-4 6-9

30 Stress 4-3 4-3 4-9 4-8 4-8 5-3 5-1 5-1 5-9 5-10 5-10 6-6

Defl. 3-10 5-1 4-8 4-1 5-6 5-1 4-4 5-10 5-4 4-9 6-5 5-11

40 Stress 3-8 3-8 4-1 4-1 4-1 4-7 4-5 4-5 4-11 5-0 5-0 5-7

Defl. 3-5 4-7 4-3 3-9 5-0 4-7 3-11 5-4 4-11 4-4 5-10 5-4

50 Stress 3-3 3-3 3-8 3-8 3-8 4-1 4-0 4-0 4-5 4-6 4-6 5-0

Defl. 3-2 4-3 3-11 3-5 4-8 4-3 3-8 4-11 4-6 4-0 5-5 4-11

ECONOLAP 3/4”

W A L L R O O F

The maximum allowable spans in this table represent a significant update based on the latest IBC and ASCE7 codes, which no longer permit a 33% increase in allowable stress due to wind. Therefore, some values may be less than previously published by CENTRIA. Contact CENTRIA for additional information.



psf By 1 2 3 1 2 3 1 2 3 1 2 3

20 Stress 7-0 7-0 7-10 7-9 7-9 8-8 8-4 8-4 9-4 9-8 9-8 10-10

Defl. 6-0 8-1 7-5 6-6 8-8 8-0 6-11 9-3 8-6 7-6 10-1 9-4

30 Stress 5-8 5-8 6-5 6-4 6-4 7-1 6-10 6-10 7-8 7-11 7-11 8-10

Defl. 5-3 7-1 6-6 5-8 7-7 7-0 6-0 8-1 7-5 6-7 8-10 8-2

40 Stress 4-11 4-11 5-6 5-6 5-6 6-1 5-11 5-11 6-7 6-10 6-10 7-8

Defl. 4-9 6-5 5-11 5-2 6-11 6-4 5-6 7-4 6-9 6-0 8-0 7-5

50 Stress 4-5 4-5 4-11 4-11 4-11 5-6 5-3 5-3 5-11 6-1 6-1 6-10

Defl. 4-5 5-11 5-6 4-9 6-5 5-11 5-1 6-10 6-3 5-7 7-5 6-10

1. Spans are limited by the lower of of the two values listed for stress and deflection. Stress is based on 0.6 x Fy. Deflection for TR4-36 is based on L/120.Deflection for Econolap-1/2” and Econolap-3/4” is based on L/90


3. Wind span tables are based on single skin with three fasteners per panel per support into 3/16” support.

4. All panels must be ordered as either "Roofing" or "Siding."

5. For more detailed load span information, consult www.centria.com.




Structural standing seam roof systems

SUBSTRAT ES

• SRS 2 – 24-20 gage

• SRS 3 – 24-18 gage

• G90 galvanized steel, Galvalume, stainless steel, and aluminum

PANE L W ID TH

• 12”, 16”, 18”

PANE L D EP THS

• SRS 2 – 2”

• SRS 3 – 3”

PANE L L ENGTH

• Factory-formed – up to 48’-0” max. – standard, up to 60’-0” – optional

• Field-formed – 220’-0” max.

• Provides clean, unbroken lines, minimum of exposed fasteners, continuous transitions

• Long panel lengths eliminate transition flashing,enhance weather resistance

• Unique concealed clip and panel interlock design allows unimpeded thermal movement without damage

• Mechanical seaming of roof panels in the field ensures weather resistance and enhancesappearance

• UL 580 Class 90 listing

• FM 1-90 and FM-180 for SRS 3

• Dade County NOA for SRS 3

• Low slope applications:1/2:12 without endlaps1:12 with endlaps

• Can be field roll-formed, eliminating endlaps

• SRS 3 can be curved to various radii (see Page 31)

SRS

STRUCTURALSTANDING SEAMROOF SYSTEMS

3036


SRSSTRUCTURAL STANDING SEAM ROOF SYSTEMS

NEGATIVE (UPLIFT) WIND LOADS (PSF)

Width 2'-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0"

SRS 2 18" 59* 54 49 43 38 33*

16" 65* 60 55 49 44 39*

SRS 3 18" 63* 59 54 50 45 41*

16" 63* 59 54 50 45 41*

* Tested in accordance with COE Guidespec and ASTM E 1592. These recommended loads are based on applying a safety factor of 1.65at ultimate failure load or 1.3 at yield failure, whichever is lower, asrequired by the Corps of Engineers Standard Specification. No increasein allowable stress due to wind permitted.

1. All tabulated loads are based on 24 gage G-90 galvanized steel and a minimum triple span condition.

2. For loads for other gauges or panel widths consult CENTRIA.

S R S 2 - 1 . 0

S R S 2 - 1 . 3 3 & S R S 2 - 1 . 5

S R S 3 - 1 . 0

S R S 3 - 1 . 3 3 & S R S 3 - 1 . 5

POSITIVE UNIFORM (GRAVITY) LOADS (PSF)

Width 2'-6" 3'-0" 3'-6" 4'-0" 4'-6" 5'-0"

SRS 2 18" 150** 137 101 77 61 50

16" 150** 150** 115 88 69 56

SRS 3 18" 150** 150** 112 86 68 55

16" 150** 150** 125 96 76 61

**Consult CENTRIA for positive loads in excess of 150 psf. All tabulatedloads are based on a triple span condition. Dead load of the panel is based on the weight of painted material. Deflections will not begreater than 1/180 of the span length. The above loads and spans arebased on calculations according to the AISI Specification for the Design of Cold-Formed Steel Structural Members with a base material yieldstrength of 37 ksi.

1. A minimum of 20 psf live load is recommended.

A D P 1 0 0

OTHER ROOF PRO F I L E SA R C H I T E C T U R A L D E S I G N PA N E L S S T R U C T U R A L D E S I G N PA N E L S

A D P 1 0 0 B

A D P 1 0 0 C S D P 1 7 5 S D P 2 0 0

Dorothy EmmanuelRecreation CenterPhiladelphia, PA

ArchitectKelly/MaielloArchitects & PlannerPhiladelphia, PA

CURVED SRS 3 ROOFSYSTEM

3136

CENTRIA.com

• SRS 3 mechanical curving process

• Available in 12”, 16” and 18” widths

• Curving performed on-site or in the plant, using CENTRIA-supplied equipment

• Machine curves are available in radii as low as 20’ in aluminum and 30’ in steel

• Consult CENTRIA for the minimum radius available for each gage

FEATURES & BENEFITS

CURVED SRS 3 ROOF SYSTEM

Harrisburg International Airport TerminalHarrisburg, PA

ArchitectThe Sheward Partnership

Philadelphia, PA

AMGENCambridge, MA

Architect The Stubbins Associates Inc.Cambridge, MA

3236

FEATURES & BENEFITS

VENTILATION SYSTEMS

CONT INUOUS R I DG E V EN T I L ATORS ( C RV )

Energy-saving products using gravity to providemaximum air flow.

• Available with throat openings from 2’-0” to 20’-0”

• Weathertight, low maintenance, self-cleaning

• Available accessories include dampers, screens and operators

PRO F I L E LOUVERS

Matched to CENTRIA BR5-36, Inverted BR5-36,MR3-36, Style-Rib and Super-Rib panels.

• Integrate architecturally with horizontal building panel lines

SMAL L S TR EAML I N E V EN T I L ATORS ( S SV )

Factory-assembled in 10’ sections with fixed or operable dampers

• Factory assembled in 10’-0” sections

• Fixed or operable dampers

CONT INUOUS CLAMSHELL VENT I LATORS (CSV )

Function like CRVs while offering increased capabilities.

• For extreme heat areas, throat openings of up to 32’-0” are possible using double CSVs on a monitor roof

• Available from 8’-0” through 16’-0”

C / S LOUVERS

CENTRIA and C/S Group also provide a full line of fixed, drainable, and storm-resistant louvers engineered for seamless integration with DimensionSeries panels.

VENTILATIONSYSTEMS

PRODUCTFINISHAVAILABILITY

3336

CENTRIA.com

FW Dimension Series X X X X X X X X X3

FW Graphix Series X X X X X X X X X3

Formavue X X X X X X X X

FWDS Louvers X X X X X X X X

FWDS Sunshades X X X X X X X X

Versapanel X X X X X X X X

Versawall X X X X X X X X X

FormaBond X X X X

Concept Series X X X X X X X X X X

IW-Series X X X X X X X X X X

BR5-36 X X X X X X X2 X X X X

"Econolap 1/2" X X X X X X X X X X

"Econolap 3/4" X X X X X X X X X X

MR3-36 X X X X X X X2 X X X X

Style-Rib X X X X X X X X X X

Super-Rib X X X X X X X X X X

TR4-36 X X X X X X X2 X X X X

Profile Louvers X X X X X X X X

L2 X X X X X X

L2-2 X X X X X X

L2-3 X X X X X X

L-21A X X X X X X

ADP-100 X X X X

ADP-100B X X X X

ADP-100C X X X X

SDP-175 X X X X X X X

SDP-200 X X X X X X X

SDP-200E X X X X X X X

SRS 2 X X X X X X X

SRS 3 X X X X X X X

Fluo

rofin

ish

Dur

agar

d

Dur

agar

dPl

us

Mica

Met

allic

Brill

iant

Serie

s

Dur

acas

t

Vers

acor

Plus

1

G90

Gal

vani

zed

Gal

valu

me

Alum

inum

Stai

nles

sSt

eel

1 Versacor is available embossed only and not smooth

2 Not available in 18 gage

3 Stainless is available for face elements only and not liner elements

* Contact CENTRIA for available gages

PANELS FINISHES SUBSTRATES*

PRODUCT FINISH AVAILABILITY

PRODUCT FINISH AVAILABILITY

COATING SYSTEMS

AND SUBSTRATES

3436

COATING SYSTEMS AND SUBSTRATES

1.5 mil nominal Urethane Coat

2.7 mil nominal Versacor Epoxy Barrier Coat.2 mil nominal Epoxy Primer

.8 mil nominal Polyvinylidene Fluoride Clear Coat*

.8 mil nominal Primer

.8 mil nominal Polyvinylidene Fluoride Color Coat*

Substrate



Substrate

DURAGARD ® P LUS

A premium, high build architectural coating providing the ultimate in colorretention and fade resistance.

Du r a g a rd®

.5 mil nominal Polyvinylidene Fluoride Clear Coat*



Substrate

SUNDANCE AM–A LUM IN I UM META L L I C 3 - COAT F I N I SH

A quality, durable coating providing the iridescence and reflectivity of a metallic surface.

Acrylic and Natural Aggregate Matrix


.8 mil nominal Polyester

Substrate

DURACAST ® TEXTURED F I N I SH SYSTEM**

Factory-applied coating with natural aggregate matrix providingthe look and feel of precast. Available exclusively for DimensionSeries and Versawall.

VERSACOR ® P LUS

A premium, high build, multi-layer coating for applications wherecorrosion resistance is more important.

FLUOROF IN ISH®* AND 2 - COAT BR ILL IANT™

A Kynar 500®, Hylar 5000® or FEVE-based coating providing good durability.


Substrate

.8 mil nominal Color Coat

AVA I L AB L E SUBSTRAT ES

• Standard G-90 hot-dip galvanized steel conforming to ASTM A924 and ASTM 653 structural quality

• Galvalume steel, unpainted hot-dip coated with aluminum-zinc alloy conforming to ASTM A924and ASTM A792

• Stainless Steel**, Type 304 AISI architectural grade alloy;austenitic, non-magnetic, non-glare surface; slight variationin surface finish

• Aluminum Alloy 3003 or 5052 and for standing seam roofpanels, 3004**, available in smooth surface as a substrate

NOTE: Galvalume, stainless and aluminum may not be available for allproduct profiles or coating systems. Consult CENTRIA sales.

Galvalume offers improved heat resistance only when used unpainted.

CENTRIA has devoted more than 100 years

to the art and science of producing color coated

metal walls and roofs that impart the very best

in aesthetics and performance. This includes

a wide variety of high-quality coating systems,

a full palette of colors and a range of substrates

and surface textures to meet even the most

demanding environmental conditions.

* Polyvinylidene Fluoride (PVDF) coat contains 70% Kynar 500 or Hylar5000 resin. Kynar 500 is a Reg. TM of Atofina Chemicals, Inc. Hylar 5000is a Reg. TM of Solvay Solvents, Inc. Galvalume is a Reg. TM of BIECInternational, Inc.

**Subject to minimum quantity requirements.

SUNDANCE MICA* 2 - COAT F IN ISH

A Kynar 500®, Hylar 5000® or FEVE-based coating providing good durability.


Substrate

.8 mil nominal Color Coat

TH E I NDUSTRY ’ S W ID ES T ARRAY O F CO LORS

CENTRIA offers you a full array of colors (see CENTRIAColors brochure) including micas and bright metallics.

CUSTOM COLOR MATCH I NG

CENTRIA is also equipped with the latest color matchingtechnology enabling us to provide fast turnaround oneven the most unique or unusual colors.

For complete information on CENTRIA coating systems,contact us for a copy of our coatings brochure.

07 FORM MEETS FUNCTION - Suppliers - Sweets · Newark, NJ P: 973.857.1405 F: 973.857.1406 New York,...

Documents

Transcript of 07 FORM MEETS FUNCTION - Suppliers - Sweets · Newark, NJ P: 973.857.1405 F: 973.857.1406 New York,...