06AOS012 ResidentialFullLine 11/3/06 1:52 PM Page CV4 ...industry’s most contractor-friendly...
Transcript of 06AOS012 ResidentialFullLine 11/3/06 1:52 PM Page CV4 ...industry’s most contractor-friendly...
Residential
A. O. Smith reserves the right to make product changes or improvements at any time without notice.
A. O. SMITH WATER HEATERS500 Tennessee Waltz Parkway
Ashland City, TN 37015www.hotwater.com
A.O. Smith reserves the right to make product changes or improvements at any time without notice.
5M-MSI -0104 ©2006 A. O. Smith Corporation Printed in U.S.A.Form No. ARBCA00106October 2006R
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page CV4
3
T&P Relief ValveEvery temperature and pressure relief valve is factory-supplied andmatched to the heater to help ensurethat every A. O. Smith residentialwater heater is installed properly.
Innovative A. O. Smith C3 Technology™ Water Heaters A. O. Smith 30-, 40- and 50-gallon standard atmospheric gas and 40- and 50-gallon Power-Vent gas water heater models nowincorporate C3 Technology™. They meet new ANS Z21.10.1“Flammable Vapor Ignition Resistant” standards associated withthe accidental ignition of flammable vapors outside the waterheater. With A. O. Smith’s non-metallic Corderite Flame Arrestor,C3 Technology provides an advanced level of protection and theindustry’s most contractor-friendly design.
Green Choice™ Low-NOx BurnerPatented “eco-friendly” burner design reduces NOx emissions by up to 33% and complies with Southern California and Texas requirements. Standard on all gas models.
WATER HEATERS
CoreGard™ – Advanced Anode Rod Protection…Now AnIndustry Standard!The anode rod is a highly effective corrosion fightingsystem which utilizes cathodic action to protectinternal tank surfaces from corrosive elements.CoreGard adds a stainless steel core to magnesiumor aluminum anodes for even longer life. Standardon Conservationist and ProMax models.
Intelli-Vent Power Gas Control ValveNow standard on A. O. Smith power-vent and power direct-vent models, this advancedelectronic valve features polarity sensing to ensureproper operation, simplified diagnostics and anearly indestructible silicon nitride hot surfaceigniter.
DynaClean™Automatic Sediment-Cleaning SystemAutomatic self-cleaning action greatly reduces sediment accumulationand maximizes hot water output.Conservationist models are equipped withadvanced DynaClean II, for maximumsediment-fighting power. ProMax® modelsfeature standard DynaClean design.
PEX Dip Tubes A. O. Smith’s PEX cross-link polymerdip tubes are long-lasting withsuperior resistance to destructivethermal oxidation. Standard on allgas and electric models.
Tamper-Resistant Brass Drain ValveReliable, quality brass drain valve with “screw-slot” head to helpprevent valve opening by curiousyoungsters. Standard on most otherresidential gas and electric models.
Blue Diamond™ Glass CoatingOur Conservationist® gas and electric waterheaters now have the ultimate protectionagainst rust and corrosion for the longest tanklife. A. O. Smith’s Blue Diamond™ glasscoating provides over twice the corrosionresistance compared to industry-standardglass lining.
2
A.O. Smith makes an important
decision easy!
Residential
Choosing the right water heater isn't as simple as
“one size fits all.” The size of the family, the size
of the bathtub, and the size of the budget are
just three factors to consider. A. O. Smith has
taken all of these factors into account and offers an
innovative selection of gas and electric residential
water heaters that provide clear choices to make
the right selection for every home.
The very best and most efficient water heater
money can buy is the Conservationist®. For large
families or homes with high hot water demand,
ProMax® High Recovery delivers maximum hot
water. If utility rebates can reduce cost, ProMax®
High Efficiency is the right choice. Regardless of
the model, you can be sure it’s built on a solid
foundation of quality and innovation that’s made
A. O. Smith water heaters the preferred brand of
the professional plumbing contractor.
All A. O. Smith residential water heaters meet or exceed federal minimum efficiency standards effective January 20, 2004,according to the National Appliance Energy Conservation Act (NAECA). They also comply with the latest editions of theB.O.C.A. National Codes, C.E.C., U.B.C., S.B.C.C., C.A.B.O. and the HUD Standards Gas models meet American NationalStandards Institute standards (ANS Z21.10.1) governing storage type water heaters. Electric models are UL listed according to safety specifications outlined in Underwriters Laboratories, Inc. Standards for Safety (U.L. 174).
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 2
3
T&P Relief ValveEvery temperature and pressure relief valve is factory-supplied andmatched to the heater to help ensurethat every A. O. Smith residentialwater heater is installed properly.
Innovative A. O. Smith C3 Technology™ Water Heaters A. O. Smith 30-, 40- and 50-gallon standard atmospheric gas and 40- and 50-gallon Power-Vent gas water heater models nowincorporate C3 Technology™. They meet new ANS Z21.10.1“Flammable Vapor Ignition Resistant” standards associated withthe accidental ignition of flammable vapors outside the waterheater. With A. O. Smith’s non-metallic Corderite Flame Arrestor,C3 Technology provides an advanced level of protection and theindustry’s most contractor-friendly design.
Green Choice™ Low-NOx BurnerPatented “eco-friendly” burner design reduces NOx emissions by up to 33% and complies with Southern California and Texas requirements. Standard on all gas models.
WATER HEATERS
CoreGard™ – Advanced Anode Rod Protection…Now AnIndustry Standard!The anode rod is a highly effective corrosion fightingsystem which utilizes cathodic action to protectinternal tank surfaces from corrosive elements.CoreGard adds a stainless steel core to magnesiumor aluminum anodes for even longer life. Standardon Conservationist and ProMax models.
Intelli-Vent Power Gas Control ValveNow standard on A. O. Smith power-vent and power direct-vent models, this advancedelectronic valve features polarity sensing to ensureproper operation, simplified diagnostics and anearly indestructible silicon nitride hot surfaceigniter.
DynaClean™Automatic Sediment-Cleaning SystemAutomatic self-cleaning action greatly reduces sediment accumulationand maximizes hot water output.Conservationist models are equipped withadvanced DynaClean II, for maximumsediment-fighting power. ProMax® modelsfeature standard DynaClean design.
PEX Dip Tubes A. O. Smith’s PEX cross-link polymerdip tubes are long-lasting withsuperior resistance to destructivethermal oxidation. Standard on allgas and electric models.
Tamper-Resistant Brass Drain ValveReliable, quality brass drain valve with “screw-slot” head to helpprevent valve opening by curiousyoungsters. Standard on most otherresidential gas and electric models.
Blue Diamond™ Glass CoatingOur Conservationist® gas and electric waterheaters now have the ultimate protectionagainst rust and corrosion for the longest tanklife. A. O. Smith’s Blue Diamond™ glasscoating provides over twice the corrosionresistance compared to industry-standardglass lining.
2
A.O. Smith makes an important
decision easy!
Residential
Choosing the right water heater isn't as simple as
“one size fits all.” The size of the family, the size
of the bathtub, and the size of the budget are
just three factors to consider. A. O. Smith has
taken all of these factors into account and offers an
innovative selection of gas and electric residential
water heaters that provide clear choices to make
the right selection for every home.
The very best and most efficient water heater
money can buy is the Conservationist®. For large
families or homes with high hot water demand,
ProMax® High Recovery delivers maximum hot
water. If utility rebates can reduce cost, ProMax®
High Efficiency is the right choice. Regardless of
the model, you can be sure it’s built on a solid
foundation of quality and innovation that’s made
A. O. Smith water heaters the preferred brand of
the professional plumbing contractor.
All A. O. Smith residential water heaters meet or exceed federal minimum efficiency standards effective January 20, 2004,according to the National Appliance Energy Conservation Act (NAECA). They also comply with the latest editions of theB.O.C.A. National Codes, C.E.C., U.B.C., S.B.C.C., C.A.B.O. and the HUD Standards Gas models meet American NationalStandards Institute standards (ANS Z21.10.1) governing storage type water heaters. Electric models are UL listed according to safety specifications outlined in Underwriters Laboratories, Inc. Standards for Safety (U.L. 174).
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 2
54
ResidentialGas
Conservationist®
The Conservationist, our top-of-the-line model, is fully loaded with all of A. O. Smith’s leadinginnovations. For consumers looking for maximum energy savings and excellent output, theConservationist is the model of choice.
• Highest energy factors – 2˝-thick CFC-free foam insulation, with external traps, specially designed “high draw” combustion chamber
• DynaClean™ II automatic sediment-cleaning system – creates turbulence in tank formaximum protection against lime and sediment buildup
• Blue Diamond™ Glass Coating – A. O. Smith innovation delivers over twice the corrosionresistance compared to industry-standard glass lining
• C3 Technology™ “Flammable Vapor Ignition Resistant” System
• 40,000 BTU input on all models – delivers high first hour ratings and recoveries
• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes
• Heat trap nipples reduce heat loss through outlet and inlet water connections (3/4˝ male)
• Our best CoreGard™ magnesium anode rod with stainless steel core provides addedprotection against tank corrosion
• Piezo igniter for easy “no-match” pilot ignition
• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared tostandard burners
• Factory-installed temperature and pressure (T&P) relief valve
• Tamper-resistant brass drain valve
• Extra warranty protection – 10 years on the tank and parts
• 12-year extended warranty available
GAS WATER HEATERS
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
Standard VentWater Heater
Selection GuideTo select the right A. O. Smith water heater for your home, you need to consider the size of your familyand other factors that contribute to your First Hour Rating Requirement. The chart below provides suggested
A. O. Smith Residential Water Heater selection guidelines for several family sizes.
To Choose the Right Water Heater for You…
1. Determine whether your family is Low Demand or High Demand. You should consider your family to be High Demand if...
• There are more than two full baths in the home.
• There are (or will be) teenagers living in the home. It’s a fact: teenagers use more hot water for showering and washing clothes.
• If you have an oversize whirlpool bath or other large tub. As a rule of thumb, the water heater tank capacity should be 100% of the bathtub capacity (example: 75-gallon tub/75-gallon water heater).
2. Find your Family Size and Demand Profile in the chart below, and read across to find the First Hour RatingRequirement for your family. If you decide your family is High Demand, consider moving up to the next FirstHour Rating level.
3. Consult the charts on the following pages for an A. O. Smith residential water heater with a First Hour Ratingthat meets your requirement.
FAMILY SIZE FIRST HOUR RATING REQUIREMENT
2 People 45 – 55 Gallons
3 People 55 – 65 Gallons
4 People 65 – 75 Gallons
5 People 75 – 85 Gallons
6 People 85 – 100 Gallons
7 or More People 100 or More Gallons Remember, these are general recommendations...your A. O. Smith Water Heater Specialist can review your family’s needs in even greater detailto make sure the model you choose will always provide enough hot water to meet the demand.
Residential
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET
TALL MODELS
XGV-40 81 .63 40 40,000 41 63-1/2 20-1/2 3 or 4
XGV-50 97 .63 50 40,000 44 65 22 3 or 4
SHORT MODELS
XGVL-40 79 .63 40 40,000 43 56 22 3 or 4
*Height to top of draft hood.
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 4
54
ResidentialGas
Conservationist®
The Conservationist, our top-of-the-line model, is fully loaded with all of A. O. Smith’s leadinginnovations. For consumers looking for maximum energy savings and excellent output, theConservationist is the model of choice.
• Highest energy factors – 2˝-thick CFC-free foam insulation, with external traps, specially designed “high draw” combustion chamber
• DynaClean™ II automatic sediment-cleaning system – creates turbulence in tank formaximum protection against lime and sediment buildup
• Blue Diamond™ Glass Coating – A. O. Smith innovation delivers over twice the corrosionresistance compared to industry-standard glass lining
• C3 Technology™ “Flammable Vapor Ignition Resistant” System
• 40,000 BTU input on all models – delivers high first hour ratings and recoveries
• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes
• Heat trap nipples reduce heat loss through outlet and inlet water connections (3/4˝ male)
• Our best CoreGard™ magnesium anode rod with stainless steel core provides addedprotection against tank corrosion
• Piezo igniter for easy “no-match” pilot ignition
• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared tostandard burners
• Factory-installed temperature and pressure (T&P) relief valve
• Tamper-resistant brass drain valve
• Extra warranty protection – 10 years on the tank and parts
GAS WATER HEATERS
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
Standard VentWater Heater
Selection GuideTo select the right A. O. Smith water heater for your home, you need to consider the size of your familyand other factors that contribute to your First Hour Rating Requirement. The chart below provides suggested
A. O. Smith Residential Water Heater selection guidelines for several family sizes.
To Choose the Right Water Heater for You…
1. Determine whether your family is Low Demand or High Demand. You should consider your family to be High Demand if...
• There are more than two full baths in the home.
• There are (or will be) teenagers living in the home. It’s a fact: teenagers use more hot water for showering and washing clothes.
• If you have an oversize whirlpool bath or other large tub. As a rule of thumb, the water heater tank capacity should be 100% of the bathtub capacity (example: 75-gallon tub/75-gallon water heater).
2. Find your Family Size and Demand Profile in the chart below, and read across to find the First Hour RatingRequirement for your family. If you decide your family is High Demand, consider moving up to the next FirstHour Rating level.
3. Consult the charts on the following pages for an A. O. Smith residential water heater with a First Hour Ratingthat meets your requirement.
FAMILY SIZE FIRST HOUR RATING REQUIREMENT
2 People 45 – 55 Gallons
3 People 55 – 65 Gallons
4 People 65 – 75 Gallons
5 People 75 – 85 Gallons
6 People 85 – 100 Gallons
7 or More People 100 or More Gallons Remember, these are general recommendations...your A. O. Smith Water Heater Specialist can review your family’s needs in even greater detailto make sure the model you choose will always provide enough hot water to meet the demand.
Residential
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET
TALL MODELS
XGV-40 81 .63 40 40,000 41 63-1/2 20-1/2 3 or 4
XGV-50 97 .63 50 40,000 44 65 22 3 or 4
SHORT MODELS
XGVL-40 79 .63 40 40,000 43 56 22 3 or 4
*Height to top of draft hood.
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 4
7
GAS WATER HEATERS
6For propane gas inputs, further detailed information on warranties and technical specifications,
visit www.hotwater.com to view and download specifications.
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET
GCV-30 66 .62 28 40,000 41 59-5/8 16 3 or 4
GCV-40 71 .60 38 40,000 39 57-5/8 18-1/2 3 or 4
GCV-50 91 .58 50 40,000 41 60-7/8 20 3 or 4
GCVL-30 66 .61 30 40,000 40 48-1/8 18-1/2 3 or 4
GCVL-40 71 .59 40 40,000 41 51-5/8 20 3 or 4
GCVL-50 80 .58 50 40,000 41 53-1/4 24 3 or 4
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET
GCVT-40 88 .60 38 50,000 48 58-1/2 20-1/2 4
GCVT-50 90 .58 48 50,000 51 60-7/8 20 4
GCVX-50 93 .58 50 65,000 67 63-7/8 22 4
GCG-65** 112 .55 65 65,000 67 63-1/4 22 4
FCG-75** N/A N/A 74 75,100 81 61 26-1/2 4
FCG-100** N/A N/A 98 75,100 81 68-1/2 26-1/2† 4
GVR-30 66 .63 30 40,000 41 62-3/8 18 3 or 4
GVR-40 71 .62 40 40,000 41 59-7/8 20-1/2 3 or 4
GVR 50 80 .62 50 40,000 41 60-7/8 22 3 or 4
*Height to top of draft hood.**Not equipped with C3 Technology.
For 10-year tank warranty, change “G” to “X” in model number ( XCVT-40). On 75-gallon and 100-gallon models, change “F” to ”P” in model number (PCG-75).
†When model ordered as propane diameter increases to 27-3/4˝.
ProMax®
A terrific value for homes that need an economical water heater that will performexceptionally well for years.
• C3 Technology™ “Flammable Vapor Ignition Resistant” System• DynaClean™ diffuser dip tube – reduces lime and sediment buildup• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared
to standard burners• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition• CoreGard™ aluminum anode rod with stainless steel core provides added
protection against tank corrosion• Tamper-resistant brass drain valve• Factory-installed temperature and pressure (T&P) relief valve• 6-year warranty on tank and parts• 8-year extended warranty available on all models• 10-year tank warranty available on all models
ResidentialGas
Energy-Saver Manufactured Housing• All models meet HUD requirements for manufactured housing installation• Available in standard-vent or direct-vent design• Convertible gas control for natural gas or propane gas operation• Side-mounted cold water inlet, top-mounted hot water outlet• Roof jack kits available for direct-vent models, with intake air
and exhaust vents • Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33%
compared to standard burners• Aluminum anode rod helps protect against tank corrosion• External heat traps• Factory-installed temperature and pressure (T&P) relief valve• Thick CFC-free foam insulation• 6-year tank/2-year parts warranty
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET
FMG-30 54 .61 30 30,000 31 59-1/2 18 3
FMG-40 63 .59 40 30,000 31 60 20 3
FMG-50 77 .58 50 38,000 39 63 22 3 or 4
FMD-30 54 .61 30 30,000 31 56 18 -
FMD-40 64 .59 40 32,000 33 56-1/2 20 -
FMD-50 77 .58 50 38,000 39 56-1/2 22 -
*Height to top of draft hood.
HIGHEFFICIENCY
HIGHRECOVERY
STANDARDATMOSPHERICVENT MODELS
DIRECTVENT
MODELS
ProMax® PlusHigh RecoveryThe ProMax Plus High Recovery is A. O. Smith’s “big family” gas line with larger sizes and higherinputs than any other. They are ideal for homes with teens or other high-demand factors.
• Highest recoveries and first hour ratings – capacity/input combinations upto 98 gallons/75,100 BTU produce recoveries up to 81 gallons per hour,with deliverable hot water up to 150 gallons in the first hour
• C3 Technology™ “Flammable Vapor Ignition Resistant” System• DynaClean™ diffuser dip tube – reduces lime and sediment buildup• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared
to standard burners• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition• CoreGard™ aluminum anode rod with stainless steel core provides added
protection against tank corrosion• Factory-installed temperature and pressure (T&P) relief valve• Tamper-resistant brass drain valve• 6-year warranty on tank and parts• 8-year extended warranty available on 30-, 40- and 50-gallon models• 10-year tank warranty available on all models
ProMax® PlusHighEfficiencyThe ProMax Plus High Efficiency is a great combination of value and savings, meeting energyefficiency requirements for most gas utility rebate programs.
• High Energy Factors qualify for most gas utility rebate programs, Energy Star HomeProgram recommendations and California Title 24 requirements
• C3 Technology™ “Flammable Vapor Ignition Resistant” System• 2˝-thick foam insulation• Energy-saving external heat traps• DynaClean™ diffuser dip tube – reduces lime and sediment buildup• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared
to standard burners• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition• CoreGard™ aluminum anode rod with stainless steel core provides added
protection against tank corrosion• Factory-installed temperature and pressure (T&P) relief valve• Tamper-resistant brass drain valve• 6-year warranty on tank and parts• 8-year extended warranty available on all models• 10-year tank warranty available on all models
*Height to top of draft hood.For 10-year tank warranty, change “G” to “X” in model number ( XCV-30).
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 6
7
GAS WATER HEATERS
6For propane gas inputs, further detailed information on warranties and technical specifications,
visit www.hotwater.com to view and download specifications.
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET
GCV-30 66 .62 28 40,000 41 59-5/8 16 3 or 4
GCV-40 71 .60 38 40,000 39 57-5/8 18-1/2 3 or 4
GCV-50 91 .58 50 40,000 41 60-7/8 20 3 or 4
GCVL-30 66 .61 30 40,000 40 48-1/8 18-1/2 3 or 4
GCVL-40 71 .59 40 40,000 41 51-5/8 20 3 or 4
GCVL-50 80 .58 50 40,000 41 53-1/4 24 3 or 4
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET
GCVT-40 88 .60 38 50,000 48 58-1/2 20-1/2 4
GCVT-50 90 .58 48 50,000 51 60-7/8 20 4
GCVX-50 93 .58 50 65,000 67 63-7/8 22 4
GCG-65** 112 .55 65 65,000 67 63-1/4 22 4
FCG-75** N/A N/A 74 75,100 81 61 26-1/2 4
FCG-100** N/A N/A 98 75,100 81 68-1/2 26-1/2† 4
GVR-30 66 .63 30 40,000 41 62-3/8 18 3 or 4
GVR-40 71 .62 40 40,000 41 59-7/8 20-1/2 3 or 4
GVR 50 80 .62 50 40,000 41 60-7/8 22 3 or 4
*Height to top of draft hood.**Not equipped with C3 Technology.
For 10-year tank warranty, change “G” to “X” in model number ( XCVT-40). On 75-gallon and 100-gallon models, change “F” to ”P” in model number (PCG-75).
†When model ordered as propane diameter increases to 27-3/4˝.
ProMax®
A terrific value for homes that need an economical water heater that will performexceptionally well for years.
• C3 Technology™ “Flammable Vapor Ignition Resistant” System• DynaClean™ diffuser dip tube – reduces lime and sediment buildup• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared
to standard burners• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition• CoreGard™ aluminum anode rod with stainless steel core provides added
protection against tank corrosion• Tamper-resistant brass drain valve• Factory-installed temperature and pressure (T&P) relief valve• 6-year warranty on tank and parts• 8-year extended warranty available on all models• 10-year tank warranty available on all models
ResidentialGas
Energy-Saver Manufactured Housing• All models meet HUD requirements for manufactured housing installation• Available in standard-vent or direct-vent design• Convertible gas control for natural gas or propane gas operation• Side-mounted cold water inlet, top-mounted hot water outlet• Roof jack kits available for direct-vent models, with intake air
and exhaust vents • Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33%
compared to standard burners• Aluminum anode rod helps protect against tank corrosion• External heat traps• Factory-installed temperature and pressure (T&P) relief valve• Thick CFC-free foam insulation• 6-year tank/2-year parts warranty
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL GALLONS HEIGHT* DIAMETER OUTLET
FMG-30 54 .61 30 30,000 31 59-1/2 18 3
FMG-40 63 .59 40 30,000 31 60 20 3
FMG-50 77 .58 50 38,000 39 63 22 3 or 4
FMD-30 54 .61 30 30,000 31 56 18 -
FMD-40 64 .59 40 32,000 33 56-1/2 20 -
FMD-50 77 .58 50 38,000 39 56-1/2 22 -
*Height to top of draft hood.
HIGHEFFICIENCY
HIGHRECOVERY
STANDARDATMOSPHERICVENT MODELS
DIRECTVENT
MODELS
ProMax® PlusHigh RecoveryThe ProMax Plus High Recovery is A. O. Smith’s “big family” gas line with larger sizes and higherinputs than any other. They are ideal for homes with teens or other high-demand factors.
• Highest recoveries and first hour ratings – capacity/input combinations upto 98 gallons/75,100 BTU produce recoveries up to 81 gallons per hour,with deliverable hot water up to 150 gallons in the first hour
• C3 Technology™ “Flammable Vapor Ignition Resistant” System• DynaClean™ diffuser dip tube – reduces lime and sediment buildup• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared
to standard burners• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition• CoreGard™ aluminum anode rod with stainless steel core provides added
protection against tank corrosion• Factory-installed temperature and pressure (T&P) relief valve• Tamper-resistant brass drain valve• 6-year warranty on tank and parts• 8-year extended warranty available on 30-, 40- and 50-gallon models• 10-year tank warranty available on all models
ProMax® PlusHighEfficiencyThe ProMax Plus High Efficiency is a great combination of value and savings, meeting energyefficiency requirements for most gas utility rebate programs.
• High Energy Factors qualify for most gas utility rebate programs, Energy Star HomeProgram recommendations and California Title 24 requirements
• C3 Technology™ “Flammable Vapor Ignition Resistant” System• 2˝-thick foam insulation• Energy-saving external heat traps• DynaClean™ diffuser dip tube – reduces lime and sediment buildup• Advanced PEX cross-link polymer dip tube lasts longer than standard polymer dip tubes• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared
to standard burners• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition• CoreGard™ aluminum anode rod with stainless steel core provides added
protection against tank corrosion• Factory-installed temperature and pressure (T&P) relief valve• Tamper-resistant brass drain valve• 6-year warranty on tank and parts• 8-year extended warranty available on all models• 10-year tank warranty available on all models
*Height to top of draft hood.For 10-year tank warranty, change “G” to “X” in model number ( XCV-30).
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 6
9
GAS WATER HEATERS
8For further detailed information on warranties and technical specifications,
visit www.hotwater.com to view and download specifications.
Power Direct-Vent• Two-pipe “closed combustion” system permits combined horizontal and vertical venting
and air intake runs up to 45 feet
• Uses 3” Schedule 40 PVC, CPVC or ABS pipe
• Quiet modular blower, with 110V/120V electrical system (rating 3 amps or less), with 7-foot cord, standard 3-prong male connector
• Advanced Intelli-Vent gas control valve with silicon nitride hot surface igniter (see page 3)• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared
to standard burners• Heat Trap Nipples Installed (3/4˝ male connection)• CoreGard™ aluminum anode rod with stainless steel core provides added
protection against tank corrosion
• Factory-installed temperature & pressure (T&P) relief valve
• Tamper-resistant brass drain
• 6-year warranty on tank and parts
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE
GALLONS NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.
GPDH-40 73 .59 40 40,000 41 57 21 3
GPDH-50 80 .58 50 40.000 41 66 21 3
GPDT-50 80 .58 50 65,000 64 69-1/2 21 3
GPDX-75 123 .53 75 70,000 72 71-1/2 26-1/4 3
*Height to top of blower outlets.
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
ResidentialGas
Specialty-VentSpecialty-vent gas water heaters are an alternative to standard metal-vent water heaters.They provide venting flexibility in replacement applications and offer useful choices for location ofgas water heaters in new homes. Specialty-vent benefits include...
Flexible Installation – Horizontal-venting options allow tremendous flexibility for placement ofthe water heater in the home. For example, A. O. Smith Power Shot® power vent and SealedShot® power direct-vent can vent up to 40 feet, using inexpensive PVC, CPVC or ABS pipe.
Direct-venting for proper combustion – Insufficient indoor ventilation can deprive a gaswater heater of enough air for proper operation. Sealed Shot® power direct-vent and Sure Shot®
direct-vent water heaters have “two-pipe” systems that vent to and draw air from outside thehome, eliminating concerns about indoor ventilation.
Power-Vent• Performance that rivals a 75-gallon
gas water heater
• Delivers “endless hot water”
• Completely surrounded by water in tank, improves heattransfer surface over standard straight flue tube
• Helps produce 90% thermal efficiency, which saves moneyon operating costs compared to a standard 78% efficientgas water heater
• Versatile power-vent design allows combined vertical andhorizontal vent runs terminating through an outside wall,using Schedule 40 PVC pipe
• Modular blower equipped with 120V, 60Hz electrical system(rating 5 amps or less), 6-foot cord with standard 3-prongconnector
• Two heavy-duty commercial-grade anodes ensure protection against corrosion
• Intelli-Vent™ gas control for more precise water temperature control
• Side-mounted hot and cold recirculating taps
• Long-lasting pex cross-link polymer diffuser dip tube
• Six-year limited warranty on tank and parts
* Height to top of blower outlet.** Distance from back of heater to front of gas valve.
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 8
9
GAS WATER HEATERS
8For further detailed information on warranties and technical specifications,
visit www.hotwater.com to view and download specifications.
Power Direct-Vent• Two-pipe “closed combustion” system permits combined horizontal and vertical venting
and air intake runs up to 45 feet
• Uses 3” Schedule 40 PVC, CPVC or ABS pipe
• Quiet modular blower, with 110V/120V electrical system (rating 3 amps or less), with 7-foot cord, standard 3-prong male connector
• Advanced Intelli-Vent gas control valve with silicon nitride hot surface igniter (see page 3)• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared
to standard burners• Heat Trap Nipples Installed (3/4˝ male connection)• CoreGard™ aluminum anode rod with stainless steel core provides added
protection against tank corrosion
• Factory-installed temperature & pressure (T&P) relief valve
• Tamper-resistant brass drain
• 6-year warranty on tank and parts
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE
GALLONS NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.
GPDH-40 73 .59 40 40,000 41 57 21 3
GPDH-50 80 .58 50 40.000 41 66 21 3
GPDT-50 80 .58 50 65,000 64 69-1/2 21 3
GPDX-75 123 .53 75 70,000 72 71-1/2 26-1/4 3
*Height to top of blower outlets.
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
ResidentialGas
Specialty-VentSpecialty-vent gas water heaters are an alternative to standard metal-vent water heaters.They provide venting flexibility in replacement applications and offer useful choices for location ofgas water heaters in new homes. Specialty-vent benefits include...
Flexible Installation – Horizontal-venting options allow tremendous flexibility for placement ofthe water heater in the home. For example, A. O. Smith Power Shot® power vent and SealedShot® power direct-vent can vent up to 40 feet, using inexpensive PVC, CPVC or ABS pipe.
Direct-venting for proper combustion – Insufficient indoor ventilation can deprive a gaswater heater of enough air for proper operation. Sealed Shot® power direct-vent and Sure Shot®
direct-vent water heaters have “two-pipe” systems that vent to and draw air from outside thehome, eliminating concerns about indoor ventilation.
Power-Vent• Performance that rivals a 75-gallon
gas water heater
• Delivers “endless hot water”
• Completely surrounded by water in tank, improves heattransfer surface over standard straight flue tube
• Helps produce 90% thermal efficiency, which saves moneyon operating costs compared to a standard 78% efficientgas water heater
• Versatile power-vent design allows combined vertical andhorizontal vent runs terminating through an outside wall,using Schedule 40 PVC pipe
• Modular blower equipped with 120V, 60Hz electrical system(rating 5 amps or less), 6-foot cord with standard 3-prongconnector
• Two heavy-duty commercial-grade anodes ensure protection against corrosion
• Intelli-Vent™ gas control for more precise water temperature control
• Side-mounted hot and cold recirculating taps
• Long-lasting pex cross-link polymer diffuser dip tube
• Six-year limited warranty on tank and parts
* Height to top of blower outlet.** Distance from back of heater to front of gas valve.
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 8
11
GAS WATER HEATERS
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.10
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
Direct-Vent• One pipe/dual-channel system permits
horizontal venting and air intake on mostmodels up to 4 feet from outside wall
• No electrical power needed• Eco-friendly Green Choice™ gas burner
reduces NOx emissions by 33% compared to standard burners
• Heat Trap Nipples Installed (3/4˝ male connection)
• CoreGard™ aluminum anode rod with stainless steel core provides added protection against tank corrosion
• Factory-installed temperature & pressure(T&P) relief valve
• Tamper-resistant brass drain valve• 6-year warranty on tank and parts
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE
GALLONS NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.
GDVS-40 68 .59 40 36,000 36 63-3/4 21 3 x 6
GDVH-40 71 .59 40 40,000 40 63-3/4 21 3 x 6
GDVS-50 77 .58 50 38,000 38 72-1/2 21 3 x 6
GDVH-50 87 .58 50 48,000 49 76 21 3 x 6
GDVH-75 109 .53 75 55,000** 52 76-1/2 26-1/4 3 x 6
*Minimum height to top of dual-channel vent pipe.**Natural gas only.
ResidentialGas
ProMax® Power-Vent
• 40- and 50-gallon residential gas water heaters equipped withpatented C3 Technology® design
• Meet Phase II of the ANSIZ21.10.1 standards for flammable vapor ignition resistance
• Vent using 2, 3 or 4 Schedule 40 PVC, CPVC or ABS pipe
• System versatility allows combined horizontal and vertical vent runs up to 120 equivalent feet with 3 pipe, up to 160 equivalent feet with 4 pipe on 40,000 BTU and 50,000 BTU models
• Equipped with a nearly indestructible silicon nitride hot surface ignitor—no standing pilot
• Exclusive Power-Vent blower specifically designed and manufactured by A. O. Smith
• Exclusive A. O. Smith Coregard™ aluminum anode rod with stainless steel core protects tank against corrosion
• 6-year limited warranty on tank and parts
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 10
11
GAS WATER HEATERS
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.10
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
Direct-Vent• One pipe/dual-channel system permits
horizontal venting and air intake on mostmodels up to 4 feet from outside wall
• No electrical power needed• Eco-friendly Green Choice™ gas burner
reduces NOx emissions by 33% compared to standard burners
• Heat Trap Nipples Installed (3/4˝ male connection)
• CoreGard™ aluminum anode rod with stainless steel core provides added protection against tank corrosion
• Factory-installed temperature & pressure(T&P) relief valve
• Tamper-resistant brass drain valve• 6-year warranty on tank and parts
MODEL FIRST HOUR ENERGY GALLON BTU INPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR 90°F RISE
GALLONS NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.
GDVS-40 68 .59 40 36,000 36 63-3/4 21 3 x 6
GDVH-40 71 .59 40 40,000 40 63-3/4 21 3 x 6
GDVS-50 77 .58 50 38,000 38 72-1/2 21 3 x 6
GDVH-50 87 .58 50 48,000 49 76 21 3 x 6
GDVH-75 109 .53 75 55,000** 52 76-1/2 26-1/4 3 x 6
*Minimum height to top of dual-channel vent pipe.**Natural gas only.
ResidentialGas
ProMax® Power-Vent
• 40- and 50-gallon residential gas water heaters equipped withpatented C3 Technology® design
• Meet Phase II of the ANSIZ21.10.1 standards for flammable vapor ignition resistance
• Vent using 2, 3 or 4 Schedule 40 PVC, CPVC or ABS pipe
• System versatility allows combined horizontal and vertical vent runs up to 120 equivalent feet with 3 pipe, up to 160 equivalent feet with 4 pipe on 40,000 BTU and 50,000 BTU models
• Equipped with a nearly indestructible silicon nitride hot surface ignitor—no standing pilot
• Exclusive Power-Vent blower specifically designed and manufactured by A. O. Smith
• Exclusive A. O. Smith Coregard™ aluminum anode rod with stainless steel core protects tank against corrosion
• 6-year limited warranty on tank and parts
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 10
13
GAS WATER HEATERS
12For propane gas inputs, further detailed information on warranties and technical specifications,
visit www.hotwater.com to view and download specifications.
All ProMax SL waterheaters are equippedwith side-mountedrecirculating taps, likethe standard-ventmodel shown above.
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER OUTLET
GCVH-40L 71 .59 40 40,000 29,600 40 59-7/8 18-1/2 3 or 4
GCVT-40L 88 .60 38 50,000 35,000 48 58-1/2 20-1/2 4
GCVT-50L 90 .58 48 50,000 38,000 51 60-7/8 20 4
GCVX-50L 93 .58 50 65,000 50,100 67 63-7/8 22 4
GCG-65L** 112 .55 65 65,000 49,400 67 63-1/4 22 4
FCG-75L** N/A N/A 74 75,100 60,100 81 61 26-1/2 4
XGV-40L 81 .63 40 40,000 30,400 41 63-1/2 20-1/2 3 or 4
XGV-50L 97 .63 50 40,000 32,400 44 65 22 3 or 4
GCVH-40Q 71 .59 40 40,000 29,600 40 59-7/8 18-1/2 3 or 4
GCVT-40Q 88 .60 38 50,000 35,000 48 58-1/2 20-1/2 4
GCVT-50Q 90 .58 48 50,000 38,000 51 60-7/8 20 4
GCVX-50Q 93 .58 50 65,000 50,100 67 63-7/8 22 4
GCG-65Q** 112 .55 65 65,000 49,400 67 63-1/4 22 4
FCG-75Q** N/A N/A 74 75,100 60,100 81 61 26-1/2 4
*Height to top of draft hood.**Not equipped with C3 Technology.
ProMax® SLFor recirculating hot water loop systems
A. O. Smith ProMax SL “side loop” gas water heaters are designed with side-mounted recirculatingtaps for installations with combination space heating/water heating applications (such as with airhandlers) or any system requiring a recirculating hot water loop.
ProMax SL water heaters are available in Standard Vent (including self-cleaning DynaClean™ IImodels), Direct-Vent, Power-Vent and Power Direct-Vent models. All models include the followingfeatures:
• Commercial-grade PermaGlas™ lining for longer life
• Durable, tamper-resistant brass drain valve
• High-temperature DynaClean™ II diffuser dip tube reduces lime and sediment buildup
• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared to standard burners
• Factory-supplied temperature & pressure (T&P) relief valve
• Optional circulating loop connection assemblies available
• 6-year warranty on tank and parts
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
ResidentialGas
Standard Vent• Standard or self-cleaning models (equipped with advanced DynaClean™ II
automatic sediment cleaning system)
• C3 Technology™ system on 40- and 50-gallon models
• Dual anode rods for superior protection against corrosion
• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition
Direct-Vent• Closed-combustion dual-channel vent system – draws combustion air from outside, vents to
outside the home
• System permits horizontal venting up to 4 feet
• No electrical power required
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.
GDVH-40L 71 .59 40 40,000 30,000 40 63-3/4 21 3 x 6
GDVH-50L 87 .58 50 48,000 36,480 49 76 21 3 x 6
GDVH-75L 109 .53 75 55,000** 41,800 53 76-1/2 26-1/4 3 x 6
*Minimum height to top of dual-channel vent pipe.**Natural gas only.
Power-Vent• 40- and 50-gallon residential gas water heaters equipped with
patented C3 Technology® design and meet Phase II of the ANSIZ21.10.1 standards for flammable vapor ignition resistance
• Vent using 2, 3 or 4 Schedule 40 PVC, CPVC or ABS pipe
• System versatility allows combined horizontal and vertical vent runs up to 120 equivalent feet with 3 pipe, up to 160 equivalent feet with 4 pipe on 40,000 BTU and 50,000 BTU models
• Equipped with a nearly indestructible silicon nitride hot surface ignitor—no standing pilot
• Exclusive Power-Vent blower specifically designed and manufactured by A. O. Smith
• Exclusive A. O. Smith Coregard™ aluminum anode rod with stainless steel core protects tank against corrosion
• 6-year limited warranty on tank and parts
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 12
13
GAS WATER HEATERS
12For propane gas inputs, further detailed information on warranties and technical specifications,
visit www.hotwater.com to view and download specifications.
All ProMax SL waterheaters are equippedwith side-mountedrecirculating taps, likethe standard-ventmodel shown above.
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE DRAFT HOOD
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER OUTLET
GCVH-40L 71 .59 40 40,000 29,600 40 59-7/8 18-1/2 3 or 4
GCVT-40L 88 .60 38 50,000 35,000 48 58-1/2 20-1/2 4
GCVT-50L 90 .58 48 50,000 38,000 51 60-7/8 20 4
GCVX-50L 93 .58 50 65,000 50,100 67 63-7/8 22 4
GCG-65L** 112 .55 65 65,000 49,400 67 63-1/4 22 4
FCG-75L** N/A N/A 74 75,100 60,100 81 61 26-1/2 4
XGV-40L 81 .63 40 40,000 30,400 41 63-1/2 20-1/2 3 or 4
XGV-50L 97 .63 50 40,000 32,400 44 65 22 3 or 4
GCVH-40Q 71 .59 40 40,000 29,600 40 59-7/8 18-1/2 3 or 4
GCVT-40Q 88 .60 38 50,000 35,000 48 58-1/2 20-1/2 4
GCVT-50Q 90 .58 48 50,000 38,000 51 60-7/8 20 4
GCVX-50Q 93 .58 50 65,000 50,100 67 63-7/8 22 4
GCG-65Q** 112 .55 65 65,000 49,400 67 63-1/4 22 4
FCG-75Q** N/A N/A 74 75,100 60,100 81 61 26-1/2 4
*Height to top of draft hood.**Not equipped with C3 Technology.
ProMax® SLFor recirculating hot water loop systems
A. O. Smith ProMax SL “side loop” gas water heaters are designed with side-mounted recirculatingtaps for installations with combination space heating/water heating applications (such as with airhandlers) or any system requiring a recirculating hot water loop.
ProMax SL water heaters are available in Standard Vent (including self-cleaning DynaClean™ IImodels), Direct-Vent, Power-Vent and Power Direct-Vent models. All models include the followingfeatures:
• Commercial-grade PermaGlas™ lining for longer life
• Durable, tamper-resistant brass drain valve
• High-temperature DynaClean™ II diffuser dip tube reduces lime and sediment buildup
• Eco-friendly Green Choice™ gas burner reduces NOx emissions by 33% compared to standard burners
• Factory-supplied temperature & pressure (T&P) relief valve
• Optional circulating loop connection assemblies available
• 6-year warranty on tank and parts
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
ResidentialGas
Standard Vent• Standard or self-cleaning models (equipped with advanced DynaClean™ II
automatic sediment cleaning system)
• C3 Technology™ system on 40- and 50-gallon models
• Dual anode rods for superior protection against corrosion
• Piezo igniter on C3 Technology models for easy “no-match” pilot ignition
Direct-Vent• Closed-combustion dual-channel vent system – draws combustion air from outside, vents to
outside the home
• System permits horizontal venting up to 4 feet
• No electrical power required
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.
GDVH-40L 71 .59 40 40,000 30,000 40 63-3/4 21 3 x 6
GDVH-50L 87 .58 50 48,000 36,480 49 76 21 3 x 6
GDVH-75L 109 .53 75 55,000** 41,800 53 76-1/2 26-1/4 3 x 6
*Minimum height to top of dual-channel vent pipe.**Natural gas only.
Power-Vent• 40- and 50-gallon residential gas water heaters equipped with
patented C3 Technology® design and meet Phase II of the ANSIZ21.10.1 standards for flammable vapor ignition resistance
• Vent using 2, 3 or 4 Schedule 40 PVC, CPVC or ABS pipe
• System versatility allows combined horizontal and vertical vent runs up to 120 equivalent feet with 3 pipe, up to 160 equivalent feet with 4 pipe on 40,000 BTU and 50,000 BTU models
• Equipped with a nearly indestructible silicon nitride hot surface ignitor—no standing pilot
• Exclusive Power-Vent blower specifically designed and manufactured by A. O. Smith
• Exclusive A. O. Smith Coregard™ aluminum anode rod with stainless steel core protects tank against corrosion
• 6-year limited warranty on tank and parts
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page 12
15
GAS WATER HEATERS
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.14
ResidentialGas
Power Direct-Vent• Closed-combustion two-pipe system
draws combustion air from outside,vents
to outside the home
• Uses PVC, CPVC or ABS pipe
• Vents up to 50 equivalent feet with 3˝ pipe
• Quiet modular blower with 7-foot cord,
standard 3-prong plug
• Advanced Intelli-Vent gas control valve with
silicon nitride hot surface igniter (see page 3)
• Dual anode rods on 40- and 50-gallon models
*Height to top of blower outlets.
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.
GPDH-40L 73 .59 40 40,000 30,000 41 57 21 3
GPDT-50L 80 .58 50 65,000 47,500 64 69-1/2 21 3
GPDX-75L 123 .53 75 70,000 53,200 72 71-1/2 26-1/4 3
On-Demand• Installed individually or in multiples from 2 units (XT-199 or XT-236 only)
to 24 units (XT-236 only), ProStar™ offers an alternative way to meetneeds of homes with extremely high hot water demand
• Modulating input adjusts with demand: XT-190 and XT-199 modulate from25,000 to 190,000 BTU/Hour; XT-236 modulates from 21,000 to 236,000BTU/Hour
• Energy-efficient copper heat exchanger with durable copper tube and sheetconstruction
• Remote control offers digital display of thermostat setting, push-buttonadjustment, and indicator light for burner operation (provided with XT-199, XT-236, optional accessory on XT-190)
• 10-year limited warranty on heat exchanger
• 3-year limited warranty on parts
XT 190L
XT 199L
XT 236L
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 14
15
GAS WATER HEATERS
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.14
ResidentialGas
Power Direct-Vent• Closed-combustion two-pipe system
draws combustion air from outside,vents
to outside the home
• Uses PVC, CPVC or ABS pipe
• Vents up to 50 equivalent feet with 3˝ pipe
• Quiet modular blower with 7-foot cord,
standard 3-prong plug
• Advanced Intelli-Vent gas control valve with
silicon nitride hot surface igniter (see page 3)
• Dual anode rods on 40- and 50-gallon models
*Height to top of blower outlets.
MODEL FIRST HOUR ENERGY GALLON BTU INPUT BTU OUTPUT RECOVERY DIMENSIONSNUMBER RATING FACTOR CAPACITY PER HOUR PER HOUR 90°F RISE
GALLONS NATURAL NATURAL GALLONS HEIGHT* DIAMETER VENT CONN.
GPDH-40L 73 .59 40 40,000 30,000 41 57 21 3
GPDT-50L 80 .58 50 65,000 47,500 64 69-1/2 21 3
GPDX-75L 123 .53 75 70,000 53,200 72 71-1/2 26-1/4 3
On-Demand• Installed individually or in multiples from 2 units (XT-199 or XT-236 only)
to 24 units (XT-236 only), ProStar™ offers an alternative way to meetneeds of homes with extremely high hot water demand
• Modulating input adjusts with demand: XT-190 and XT-199 modulate from25,000 to 190,000 BTU/Hour; XT-236 modulates from 21,000 to 236,000BTU/Hour
• Energy-efficient copper heat exchanger with durable copper tube and sheetconstruction
• Remote control offers digital display of thermostat setting, push-buttonadjustment, and indicator light for burner operation (provided with XT-199, XT-236, optional accessory on XT-190)
• 10-year limited warranty on heat exchanger
• 3-year limited warranty on parts
XT 190L
XT 199L
XT 236L
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 14
17
ELECTRIC WATER HEATERS
16
ResidentialElectric
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
Conservationist®
The top of the line Conservationist electric water heater is fully loaded with all A. O. Smith’sleading innovations. For consumers looking for maximum energy savings and excellent output,the Conservationist is the model of choice.
• Our most efficient electric models, for maximum savings on operating costs with 3˝ thickCFC-free insulation, external heat traps
• DynaClean™ II automatic sediment-cleaning system – creates turbulence in tank formaximum protection against lime and sediment buildup
• Blue Diamond™ Glass Coating – A. O. Smith innovation delivers over twice the corrosionresistance compared to industry-standard glass lining
• 4500-watt Phoenix™ low-watt density Incoloy steel upper and lower heating elements –designed to operate more efficiently and last 2-3 times longer than standard copperelements
• Tamper-resistant brass drain valve
• Factory-supplied temperature & pressure (T&P) relief valve
• Extra warranty protection – 10 years on the tank and parts
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONSNUMBER RATING FACTOR CAPACITY
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETERUPPER/LOWER UPPER/LOWER
TALL MODELS
PXHT-40 56 .95 40 4500 5500 60-1/2 20
PXHT-52 60 .95 50 4500 5500 57 22-1/2
PXHT-66 72 .95 66 4500 5500 62 24
PXHT-80 81 .95 80 4500 5500 62 26
SHORT MODELS
PXHS-40 52 .95 40 4500 5500 47 22-1/2
PXHS-50 62 .95 50 4500 5500 50 24
Recovery capacity based on actual performance test.Water connections: 3/4" male NPT on all models.Top-mounted T&P valve not available.
ProMax® Plus High EfficiencyProMax Plus High Efficiency is a great combination of value and savings, meeting energy-efficiency requirements for most electric utility rebate programs.
• Meets energy-efficiency requirements for most electric utility programs, Energy Star Home Program recommendations and Title 24 requirements
• 2-1/2˝ thick CFC-free foam insulation
• Energy-saving external heat traps (3/4˝ male connection)
• DynaClean™ diffuser dip tube reduces lime and sediment buildup
• Durable, tamper-resistant brass drain valve
• Factory-supplied temperature & pressure (T&P) relief valve
• 6-year warranty on tank and parts
• 8-year extended warranty available on 40- through 66-gallon models
• 10-year tank warranty available on all models
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONSNUMBER RATING FACTOR CAPACITY
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETERUPPER/LOWER UPPER/LOWER
TALL MODELS
ECRT-40 54 .93 40 4500 6000 60 19
ECRT-52* 60 .93 50 4500 6000 56-1/2 21-1/2
ECRT-66 76 .93 66 4500 6000 61 23
ECRT-80* 87 .93 80 4500 6000 61-1/2 25
SHORT MODELS
ECRS-50 62 .93 50 4500 6000 49 23
Recovery capacity based on actual performance test.For 10-year tank warranty, change “E” to “P” in model number (PCRT-40).*Models not available with top T&P.
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 16
17
ELECTRIC WATER HEATERS
16
ResidentialElectric
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
Conservationist®
The top of the line Conservationist electric water heater is fully loaded with all A. O. Smith’sleading innovations. For consumers looking for maximum energy savings and excellent output,the Conservationist is the model of choice.
• Our most efficient electric models, for maximum savings on operating costs with 3˝ thickCFC-free insulation, external heat traps
• DynaClean™ II automatic sediment-cleaning system – creates turbulence in tank formaximum protection against lime and sediment buildup
• Blue Diamond™ Glass Coating – A. O. Smith innovation delivers over twice the corrosionresistance compared to industry-standard glass lining
• 4500-watt Phoenix™ low-watt density Incoloy steel upper and lower heating elements –designed to operate more efficiently and last 2-3 times longer than standard copperelements
• Tamper-resistant brass drain valve
• Factory-supplied temperature & pressure (T&P) relief valve
• Extra warranty protection – 10 years on the tank and parts
• 12-year extended warranty available on 40- through 66-gallon models
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONSNUMBER RATING FACTOR CAPACITY
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETERUPPER/LOWER UPPER/LOWER
TALL MODELS
PXHT-40 56 .95 40 4500 5500 60-1/2 20
PXHT-52 60 .95 50 4500 5500 57 22-1/2
PXHT-66 72 .95 66 4500 5500 62 24
PXHT-80 81 .95 80 4500 5500 62 26
SHORT MODELS
PXHS-40 52 .95 40 4500 5500 47 22-1/2
PXHS-50 62 .95 50 4500 5500 50 24
Recovery capacity based on actual performance test.Water connections: 3/4" male NPT on all models.Top-mounted T&P valve not available.
ProMax® Plus High EfficiencyProMax Plus High Efficiency is a great combination of value and savings, meeting energy-efficiency requirements for most electric utility rebate programs.
• Meets energy-efficiency requirements for most electric utility programs, Energy Star Home Program recommendations and Title 24 requirements
• 2-1/2˝ thick CFC-free foam insulation
• Energy-saving external heat traps (3/4˝ male connection)
• DynaClean™ diffuser dip tube reduces lime and sediment buildup
• Durable, tamper-resistant brass drain valve
• Factory-supplied temperature & pressure (T&P) relief valve
• 6-year warranty on tank and parts
• 8-year extended warranty available on 40- through 66-gallon models
• 10-year tank warranty available on all models
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONSNUMBER RATING FACTOR CAPACITY
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETERUPPER/LOWER UPPER/LOWER
TALL MODELS
ECRT-40 54 .93 40 4500 6000 60 19
ECRT-52* 60 .93 50 4500 6000 56-1/2 21-1/2
ECRT-66 76 .93 66 4500 6000 61 23
ECRT-80* 87 .93 80 4500 6000 61-1/2 25
SHORT MODELS
ECRS-50 62 .93 50 4500 6000 49 23
Recovery capacity based on actual performance test.For 10-year tank warranty, change “E” to “P” in model number (PCRT-40).*Models not available with top T&P.
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 16
19
ELECTRIC WATER HEATERS
18
ResidentialElectric
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
ProMax® Specialty ElectricTo make the most out of limited space or deliver small amounts of hot water for small-demandapplications, A. O. Smith offers three ProMax Specialty choices. 6-year tank and parts warranty on all models.
• Table Top - Featuring convenient flat surface at 36˝ height to provide extra “counter space.” All plumbing and electrical connections through back of heater.
• Lowboy Side Connect - Compact design, with side-mounted plumbing and electrical connections, for installation under a counter or in other tight spaces. Single heating element.
• Point-Of-Use - For low-demand point-of-use applications. Single heating element. 110/120V cord set with 3-prong plug. Wall mounting supplied.
ProMax®
A terrific value for homes that need an economical water heater that will perform exceptionally well for years.
• Tall, Short and Lowboy (top connect) models available
• Thick CFC-free foam insulation
• DynaClean™ diffuser dip tube reduces lime and sediment buildup
• Durable, tamper-resistant brass drain valve
• Factory-supplied temperature & pressure (T&P) relief valve
• 6-year warranty on tank and parts
• 8-year extended warranty available on 30- through 66-gallon models
• 10-year tank warranty available on all models
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONSNUMBER RATING FACTOR CAPACITY
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETERUPPER/LOWER UPPER/LOWER
TALL MODELS
ECT-30** 43 .93 30 4500 6000 46-1/2 18
ECT-40 52 .92 40 4500 6000 59-1/2 18
ECT-52 62 .91 50 4500 6000 54 20-1/2
ECT-55† 67 .90 55 4500 6000 60-1/4 20-1/2
ECT66 72 .88 66 4500 6000 60-1/4 22
ECT-80† 81 .86 80 4500 6000 60-1/2 24
ECT-120*† 112 .81 119 4500 6000 64-1/4 28
SHORT MODELS
ECS-30** 43 .93 30 4500 6000 36-1/2 20-1/2
ECS-40** 52 .92 40 4500 6000 44 20-1/2
ECS-50** 62 .90 50 4500 6000 48 22
LOWBOY MODELS
ELJC-6 N/A N/A 6 1500 @ 120 2500 15-1/2 14-1/4
ELJC-15 N/A N/A 15 1500 @ 120 2500 32-1/4 14-1/4
ELJC-20 N/A N/A 19 2500 @ 120 6000 32-1/4 18
ECL-30** 41 .93 29 4500 6000 30 22
ECLN-40** 48 .92 38 4500 6000 31-1/2 23
ECL-50** 55 .91 50 4500 6000 34 26-1/2
Recovery capacity is based on actual performance tests.For 10-year tank warranty, change “E” to “P” in model number (PCT-40).*This model is not available with top T&P valve.PCL-40 and PCL-50 are not available with top T&P.**Models supplied with Heat Trap Nipples.†Models with installed Nipples.All water connections are 3/4" NPT.
Energy Saver Manufactured Housing• All models meet HUD requirements for manufactured housing installation
• Side-mounted cold water inlet and hot water outlet
• Two heating elements on 30-, 40- and 50-gallon models
• Aluminum anode rod for added protection against tank corrosion
• Factory-installed temperature and pressure (T&P) relief valve
• Thick CFC-free foam insulation
• 5-year tank/1-year parts warranty
MODEL FIRST HOUR ENERGY GALLON STD. RECOVERY R HEIGHT DIAMETERNUMBER RATING FACTOR CAPACITY VOLTAGE/WATTAGE 90°F RISE VALUE
GALLONS GALLONS
ESM-20 - - 19.9 120V, 1650 Watts 8 12 34 17
ESM-30 43 .93 30 240V, 3800 Watts 17 16 37-1/2 20-1/2
ESM-40 51 .93 40 240V, 3800 Watts 17 16 46 20-1/2
ESM-50 58 .95 50 240V, 3800 Watts 17 16 56 20-1/2
All Dimensions in Inches.All water connections 3/4" NPT.
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONSNUMBER RATING FACTOR CAPACITY
GALLONSSTANDARD MAXIMUM HEIGHT DIAMETER
TABLE TOP
ESTT-30 45 .89 27 4500* 6000 36 21**
ESTT-40 52 .88 40 4500* 6000 36 24**
LOWBOY SIDE-CONNECT MODELS
ELSC-10S N/A N/A 10 1500 @ 120 3000 18 18
ELSC-15S N/A N/A 15 1500 @ 120 3000 25-3/4 18
ELSC-20S N/A N/A 19 2500 3000 22-1/4 21-3/4
ECJ-30 37 .93 29 4500* 6000 30 22
ECJ-40 43 .92 40 4500* 6000 32-1/4 25
POINT-OF-USE MODELS
ELJC-2 N/A N/A 2 1440 @ 120V 12-3/4† 10
ELJC-4 N/A N/A 4 1440 @ 120V 20† 10
Dimension from floor to cold water inlet on all lowboy side-connect models is 3-1/2".Point-of-Use models have 1/2" inlet and outlet connections. All others are 3/4" NPT.*240V standard element.**Depth (front to back) of both table top models is 25-1/8". Width is 21" for ESTT-30 and 24" for ESTT-40.†Top mounted T&P adds approx. 3" additional to overall unit height.
Table Top
Lowboy
Point-of-Use
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 18
19
ELECTRIC WATER HEATERS
18
ResidentialElectric
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
ProMax® Specialty ElectricTo make the most out of limited space or deliver small amounts of hot water for small-demandapplications, A. O. Smith offers three ProMax Specialty choices. 6-year tank and parts warranty on all models.
• Table Top - Featuring convenient flat surface at 36˝ height to provide extra “counter space.” All plumbing and electrical connections through back of heater.
• Lowboy Side Connect - Compact design, with side-mounted plumbing and electrical connections, for installation under a counter or in other tight spaces. Single heating element.
• Point-Of-Use - For low-demand point-of-use applications. Single heating element. 110/120V cord set with 3-prong plug. Wall mounting supplied.
ProMax®
A terrific value for homes that need an economical water heater that will perform exceptionally well for years.
• Tall, Short and Lowboy (top connect) models available
• Thick CFC-free foam insulation
• DynaClean™ diffuser dip tube reduces lime and sediment buildup
• Durable, tamper-resistant brass drain valve
• Factory-supplied temperature & pressure (T&P) relief valve
• 6-year warranty on tank and parts
• 8-year extended warranty available on 30- through 66-gallon models
• 10-year tank warranty available on all models
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONSNUMBER RATING FACTOR CAPACITY
GALLONS STD. 240V MAX. 240V HEIGHT DIAMETERUPPER/LOWER UPPER/LOWER
TALL MODELS
ECT-30** 43 .93 30 4500 6000 46-1/2 18
ECT-40 52 .92 40 4500 6000 59-1/2 18
ECT-52 62 .91 50 4500 6000 54 20-1/2
ECT-55† 67 .90 55 4500 6000 60-1/4 20-1/2
ECT66 72 .88 66 4500 6000 60-1/4 22
ECT-80† 81 .86 80 4500 6000 60-1/2 24
ECT-120*† 112 .81 119 4500 6000 64-1/4 28
SHORT MODELS
ECS-30** 43 .93 30 4500 6000 36-1/2 20-1/2
ECS-40** 52 .92 40 4500 6000 44 20-1/2
ECS-50** 62 .90 50 4500 6000 48 22
LOWBOY MODELS
ELJC-6 N/A N/A 6 1500 @ 120 2500 15-1/2 14-1/4
ELJC-15 N/A N/A 15 1500 @ 120 2500 32-1/4 14-1/4
ELJC-20 N/A N/A 19 2500 @ 120 6000 32-1/4 18
ECL-30** 41 .93 29 4500 6000 30 22
ECLN-40** 48 .92 38 4500 6000 31-1/2 23
ECL-50** 55 .91 50 4500 6000 34 26-1/2
Recovery capacity is based on actual performance tests.For 10-year tank warranty, change “E” to “P” in model number (PCT-40).*This model is not available with top T&P valve.PCL-40 and PCL-50 are not available with top T&P.**Models supplied with Heat Trap Nipples.†Models with installed Nipples.All water connections are 3/4" NPT.
Energy Saver Manufactured Housing• All models meet HUD requirements for manufactured housing installation
• Side-mounted cold water inlet and hot water outlet
• Two heating elements on 30-, 40- and 50-gallon models
• Aluminum anode rod for added protection against tank corrosion
• Factory-installed temperature and pressure (T&P) relief valve
• Thick CFC-free foam insulation
• 5-year tank/1-year parts warranty
MODEL FIRST HOUR ENERGY GALLON STD. RECOVERY R HEIGHT DIAMETERNUMBER RATING FACTOR CAPACITY VOLTAGE/WATTAGE 90°F RISE VALUE
GALLONS GALLONS
ESM-20 - - 19.9 120V, 1650 Watts 8 12 34 17
ESM-30 43 .93 30 240V, 3800 Watts 17 16 37-1/2 20-1/2
ESM-40 51 .93 40 240V, 3800 Watts 17 16 46 20-1/2
ESM-50 58 .95 50 240V, 3800 Watts 17 16 56 20-1/2
All Dimensions in Inches.All water connections 3/4" NPT.
MODEL FIRST HOUR ENERGY GALLON ELEMENT WATTAGE DIMENSIONSNUMBER RATING FACTOR CAPACITY
GALLONSSTANDARD MAXIMUM HEIGHT DIAMETER
TABLE TOP
ESTT-30 45 .89 27 4500* 6000 36 21**
ESTT-40 52 .88 40 4500* 6000 36 24**
LOWBOY SIDE-CONNECT MODELS
ELSC-10S N/A N/A 10 1500 @ 120 3000 18 18
ELSC-15S N/A N/A 15 1500 @ 120 3000 25-3/4 18
ELSC-20S N/A N/A 19 2500 3000 22-1/4 21-3/4
ECJ-30 37 .93 29 4500* 6000 30 22
ECJ-40 43 .92 40 4500* 6000 32-1/4 25
POINT-OF-USE MODELS
ELJC-2 N/A N/A 2 1440 @ 120V 12-3/4† 10
ELJC-4 N/A N/A 4 1440 @ 120V 20† 10
Dimension from floor to cold water inlet on all lowboy side-connect models is 3-1/2".Point-of-Use models have 1/2" inlet and outlet connections. All others are 3/4" NPT.*240V standard element.**Depth (front to back) of both table top models is 25-1/8". Width is 21" for ESTT-30 and 24" for ESTT-40.†Top mounted T&P adds approx. 3" additional to overall unit height.
Table Top
Lowboy
Point-of-Use
For propane gas inputs, further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 18
21
PUMP & EXPANSION TANKS
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.20
Pump &Expansion Tank
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
ProMax®Pump Tanks• Multiple head construction adds structural strength
and more capacity within the same diameters
• Interior epoxy coating is permanently bonded to the tank shell for ultimate protection on the water side of the tank
• Durable butyl diaphragm ensures long life
• Positive lock retention system controls compression inthe diaphragm connection, eliminating air loss orwater leaks in tank
• Electrostatically applied powder-coated exterior formaximum sunlight (UV) resistance in outsideinstallations, with zinc phosphate undercoat forhighest corrosion resistance
• Metal air valve
• Welded steel base
• 5-year limited warranty
ProMax® Expansion Tanks• Multiple head construction adds structural strength and
more capacity within the same diameters
• Interior epoxy coating is permanently bonded to the tank shell for ultimate protection on the water side of the tank
• Durable butyl diaphragm ensures long life
• Positive lock retention system controls compression in the diaphragm connection, eliminating air loss or water leaks in tank
• Electrostatically applied powder-coated exterior for maximum sunlight (UV) resistance in outside installations, with zinc phosphate undercoat for highest corrosion resistance
• Metal air valve
• Welded steel base
• 5-year limited warranty on potable expansion tanks
• 1-year limited warranty on hydronic expansion tanks
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 20
21
PUMP & EXPANSION TANKS
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.20
Pump &Expansion Tank
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
ProMax®Pump Tanks• Multiple head construction adds structural strength
and more capacity within the same diameters
• Interior epoxy coating is permanently bonded to the tank shell for ultimate protection on the water side of the tank
• Durable butyl diaphragm ensures long life
• Positive lock retention system controls compression inthe diaphragm connection, eliminating air loss orwater leaks in tank
• Electrostatically applied powder-coated exterior formaximum sunlight (UV) resistance in outsideinstallations, with zinc phosphate undercoat forhighest corrosion resistance
• Metal air valve
• Welded steel base
• 5-year limited warranty
ProMax® Expansion Tanks• Multiple head construction adds structural strength and
more capacity within the same diameters
• Interior epoxy coating is permanently bonded to the tank shell for ultimate protection on the water side of the tank
• Durable butyl diaphragm ensures long life
• Positive lock retention system controls compression in the diaphragm connection, eliminating air loss or water leaks in tank
• Electrostatically applied powder-coated exterior for maximum sunlight (UV) resistance in outside installations, with zinc phosphate undercoat for highest corrosion resistance
• Metal air valve
• Welded steel base
• 5-year limited warranty on potable expansion tanks
• 1-year limited warranty on hydronic expansion tanks
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 20
2322
SolarBooster Tank
Solar Booster Tanks• 80- and 120-gallon electric water heaters
specifically designed for installation as part of direct solar water heating systems
• Multiple connection options for installation flexibility, with incoming and outgoing water connections through side or top of unit
• A. O. Smith Dynaclean™ diffuser dip tube made from pex cross-linked polymer helps reduce limeand sediment buildup to maximize hot water output
• A. O. Smith Permaglas® patented glass tank coating helps withstand steel tank corrosion and rust
• Durable tamper-resistant brass drain valve
• 2˝ thick foam insulation (R-16) for high efficiency factory installed temperature and pressure (T&P) relief valve
• 6-year limited warranty on tank and parts
NOTES
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 22
2322
SolarBooster Tank
Solar Booster Tanks• 80- and 120-gallon electric water heaters
specifically designed for installation as part of direct solar water heating systems
• Multiple connection options for installation flexibility, with incoming and outgoing water connections through side or top of unit
• A. O. Smith Dynaclean™ diffuser dip tube made from pex cross-linked polymer helps reduce limeand sediment buildup to maximize hot water output
• A. O. Smith Permaglas® patented glass tank coating helps withstand steel tank corrosion and rust
• Durable tamper-resistant brass drain valve
• 2˝ thick foam insulation (R-16) for high efficiency factory installed temperature and pressure (T&P) relief valve
• 6-year limited warranty on tank and parts
NOTES
For further detailed information on warranties and technical specifications,visit www.hotwater.com to view and download specifications.
06AOS012_ResidentialFullLine 11/3/06 1:53 PM Page 22
Residential
A. O. Smith reserves the right to make product changes or improvements at any time without notice.
A. O. SMITH WATER HEATERS500 Tennessee Waltz Parkway
Ashland City, TN 37015www.hotwater.com
A.O. Smith reserves the right to make product changes or improvements at any time without notice.
5M-MSI -0104 ©2006 A. O. Smith Corporation Printed in U.S.A.Form No. ARBCA00106October 2006R
06AOS012_ResidentialFullLine 11/3/06 1:52 PM Page CV4