Dr. Andrey Ponomarev STC of Applied Nanotechnology Inc. St. Petersburg, Russia EpoxyPAN Technology Main parameters of EpoxyPAN Pressure strength, more then, Mpa Adhesion, more then, Mpa .....5,5 Density, less then, g/cm 3 ..1,7 Color (by color additive).anyone Water absorption, no more,% ,3 Damp-proof, no less, W (Mpa)..20 Lifetime ( 2,5 pH media), no less, years..30 Frost resistance, cycles, no less..F500 Thermostability, no less, grad.C.160 EpoxyPAN coating technology Coating the any surface by EpoxyPAN is a very simple technology and it include two stages: A. Deal the adhesive and primers B. Deal the main composite coating Usual paint sprayer Texture sprayer LC-02 (B-002B) EpoxyPAN on the plaster and on the GMS EpoxyPAN on the Plaster EpoxyPAN on the glass-magnesium sheets EpoxyPAN on the FPU EpoxyPAN on the heat insulator foam, as vandalproof & waterproof coating EpoxyPAN on the Concrete & Metal surfaces EpoxyPAN coating on the concrete & melall surfaces provide high value of corrosion protection of substrates Concrete Tunnel Steel samples Brick, protected by EpoxyPAN EpoxyPAN on the Piers of the Dam A new possibility of EpoxyPAN application a noise damping As it was founded, EpoxyPAN coating 0,4 mm thick on the GMS is possible to damp a noise more 2-3 Db in a wide spectra range ( Hz) The light composite sheet, containing EpoxyPAN for effective noise protecting ( more, then 25 Db) Cost and feasibility EpoxyPAN coating has all necessary certification in CIS; The experience of real use in the coating of bridges, tunnels in the underground and palaces; Price over 17$ per square meter (thickness 0,8 - 1 mm). 9