02 Valve and Manifolds - SPIR STAR Valve and Manifolds.pdf · Page 2 Rev. 0 Rev. 0 ----...
Transcript of 02 Valve and Manifolds - SPIR STAR Valve and Manifolds.pdf · Page 2 Rev. 0 Rev. 0 ----...
Page 1
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Worldwide
Page 2
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Needle Valve
1 TEE BAR AISI 304
2 FIXING AISI 303
3 CAP HYTREL
4 GLAND NUT AISI 316L
5 LOCK NUT AISI 316L
6 BONNET AISI 316L
7 RING AISI 316L
8 METAL SEAL AISI 316L
9 PACKING (STEM) PTFE / GRAPHOIL
10 STEM AISI 316L
11 PIN AISI 304
MATERIALS TABLEMATERIALS TABLEMATERIALS TABLEMATERIALS TABLE
12 NON-ROTATING STEM AISI 316L
NonNonNonNon----rotating Metal Stem Tiprotating Metal Stem Tiprotating Metal Stem Tiprotating Metal Stem Tip A non rotating stem tip is typically used in high cycle applications to extend the service life of the valve. Its purpose is to prevent galling of the valve seat in contact with the non-rotating stem, which is driven straight into it without rotating. • Tee bar easy manoeuvrability with minimum
effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard,
optional: carbon steel LF2, Duplex, Super Duplex, Monel 400, Hastelloy C276, Inconel 625, Titanium, Incolloy 825
• Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the
operating thread
2222
3333
4444
5555
6666
7777
8888
9999
1111
11111111
10101010
12121212
Page 3
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Needle Valve
Anti-Tamper
Anti-Tamper Locking
Locking and AntiLocking and AntiLocking and AntiLocking and Anti----TamperTamperTamperTamper A wide range of locking devices is available on our products
The antitamper handle reduces the risk of human error and deliberate tampering. The valve can be operated with the antitamper key, sold separately.
Lockable Anti Tamper The Anti-Tamper accommodates shackles of diameter 0.25 in. ( 6 .4 mm ) or smaller and can lock.
**** PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.PADLOCK ONLY ON REQUEST.
****
Page 4
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Stem Packing MaterialStem Packing MaterialStem Packing MaterialStem Packing Material Valve MaterialValve MaterialValve MaterialValve Material Temperature rating Temperature rating Temperature rating Temperature rating
( ° C )( ° C )( ° C )( ° C ) ( ° F )( ° F )( ° F )( ° F ) psipsipsipsi barbarbarbar
Standard PTFEStandard PTFEStandard PTFEStandard PTFE SS 316L -73°C / +210°C -99°F / +410°F 6.000 413
Standard PEEKStandard PEEKStandard PEEKStandard PEEK SS 316L -40°C / +260°C -40°F / +500°F 6.000 413
Standard GraphoilStandard GraphoilStandard GraphoilStandard Graphoil SS 316L -54°C / +510° -65°F / +950°F 6.000 413
Note: Pressure at the maximum temperature information is based on ASME B16 codeNote: Pressure at the maximum temperature information is based on ASME B16 codeNote: Pressure at the maximum temperature information is based on ASME B16 codeNote: Pressure at the maximum temperature information is based on ASME B16 code
Maximum Standard PressureMaximum Standard PressureMaximum Standard PressureMaximum Standard Pressure
Material groups, Class Ratings, and Temperatures are based on ASME codes. Valves with optional packing may affect the valve rMaterial groups, Class Ratings, and Temperatures are based on ASME codes. Valves with optional packing may affect the valve rMaterial groups, Class Ratings, and Temperatures are based on ASME codes. Valves with optional packing may affect the valve rMaterial groups, Class Ratings, and Temperatures are based on ASME codes. Valves with optional packing may affect the valve ratiatiatiating ng ng ng depending on the valve materialdepending on the valve materialdepending on the valve materialdepending on the valve material
FeaturesFeaturesFeaturesFeatures • Alternative 10.000 psi ( 689 bar ) range available. • All Valves 100% factory tested. • NACE MR01-75 certified wetted parts available. • Optional cleaning and lubrication suitable for Oxygen service. • Heat code traceable body and bonnet
A complete pressure/temperature chart of the most common packing material is available on section 6 ( T echnical ) of our catalogue.
Page 5
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Sami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with unionSami Instruments needle valves and manifolds with union----bonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connbonnet construction are available in a variety of materials and end connections.ections.ections.ections. Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar )Pressure from 6000 Psi ( 413 Bar ) up to 10,000 Psi ( 690 Bar ) Temperature rating PTFE packing from Temperature rating PTFE packing from Temperature rating PTFE packing from Temperature rating PTFE packing from ––––73°C to + 210°C (73°C to + 210°C (73°C to + 210°C (73°C to + 210°C ( ----99°F / + 410°F )99°F / + 410°F )99°F / + 410°F )99°F / + 410°F ) Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from Temperature rating GRAPHOIL packing from ––––54°C to + 510° C (54°C to + 510° C (54°C to + 510° C (54°C to + 510° C ( ----65°F / + 950°F )65°F / + 950°F )65°F / + 950°F )65°F / + 950°F )
Ordering Information Ordering Information Ordering Information Ordering Information
1000÷16001000÷16001000÷16001000÷1600 Bar stock needle valvesBar stock needle valvesBar stock needle valvesBar stock needle valves
2000÷24502000÷24502000÷24502000÷2450 TwoTwoTwoTwo----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds
3000÷35503000÷35503000÷35503000÷3550 ThreeThreeThreeThree----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds
4000÷43004000÷43004000÷43004000÷4300 FourFourFourFour----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds
5000÷56005000÷56005000÷56005000÷5600 FiveFiveFiveFive----valve manifoldsvalve manifoldsvalve manifoldsvalve manifolds
VERSIONVERSIONVERSIONVERSION
OUTLETOUTLETOUTLETOUTLET B B B B 1/4” AAAA NPT
CCCC 3/8” BBBB BSPP
DDDD 1/2” CCCC BSPT
EEEE 3/4” DDDD S.W.
FFFF Ø * EEEE B.W.
GGGG 1” FFFF O.D.
HHHH Flanged HHHH Flanged IEC 61518/B
IIII M20 IIII Flanged IEC 61518/A
LLLL Coplanar
NNNN X 1,5
VERSIONVERSIONVERSIONVERSION RATINGRATINGRATINGRATING INLETINLETINLETINLET OUTLETOUTLETOUTLETOUTLET MATERIALMATERIALMATERIALMATERIAL PACKINGPACKINGPACKINGPACKING BONNETBONNETBONNETBONNET OPTIONSOPTIONSOPTIONSOPTIONS
CCCC BBBB AAAA BBBB AAAA BBBB AAAA AAAA AAAA 1 0 0 01 0 0 01 0 0 01 0 0 0
INLETINLETINLETINLET B B B B 1/4” AAAA NPT
CCCC 3/8” BBBB BSPP
DDDD 1/2” CCCC BSPT
EEEE 3/4” DDDD S.W.
GGGG 1” EEEE B.W.
HHHH Flanged HHHH Flanged IEC 61518/B
IIII M20 IIII Flanged IEC 61518/A
LLLL Coplanar
NNNN X 1,5
RATINGRATINGRATINGRATING
BBBB 3,000 PSI
CCCC 6,000 PSI
DDDD 10,000 PSI
MATERIALMATERIALMATERIALMATERIAL
BBBB Aisi 316 L
CCCC Aisi 316 Ti
DDDD Duplex F51
EEEE Super Duplex F55
FFFF Monel 400
GGGG Hastelloy C276
HHHH Inconel 625
IIII Titanium
MMMM Brass
NNNN A350-LF2
OOOO Incolloy 825
RRRR F44
SSSS Aisi 321
TTTT Aisi 317
BONNETBONNETBONNETBONNET
AAAA Std Bonnet
BBBB Gas Solution
CCCC Mini
EEEE Extended Bonnet
PACKINGPACKINGPACKINGPACKING
AAAA PTFE
BBBB Graphoil
OPTIONSOPTIONSOPTIONSOPTIONS
AAAA Drain/vent 1/2” HHHH Drain+Equalise Anti-tamper
BBBB Drain/vent M10 IIII All Anti-tamper
CCCC Drain/vent M20x1,5 LLLL Loxcleaning
DDDD Drain/vent Anti-tamper PPPP Panel Mounting
EEEE Equalise+Drain Anti-tamper QQQQ All locking device
FFFF Isolate+Drain Anti-tamper RRRR Isolate Anti-tamper
GGGG Isolate+Equalise Anti-tamper SSSS Drain Male
TTTT Drain Female
Page 6
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1000CBABABAA1000CBABABAA1000CBABABAA1000CBABABAA 1/4 ” 1/4 ” 30.00 60.00 89.00 4.00 Kg. 0,48
1000CCACABAA1000CCACABAA1000CCACABAA1000CCACABAA 3/8 ” 3/8 ” 30.00 60.00 89.00 4.00 Kg. 0.48
1000CDADABAA1000CDADABAA1000CDADABAA1000CDADABAA 1/2 ” 1/2 ” 30.00 60.00 89.00 4.00 Kg. 0.48
1000CEAEABAA1000CEAEABAA1000CEAEABAA1000CEAEABAA 3/4 ” 3/4 ” 40.00 65.00 99.00 4.00 Kg. 0.70
1000CGAGABAA1000CGAGABAA1000CGAGABAA1000CGAGABAA 1 ” 1 ” 50.00 75.00 109.00 6,50 Kg. 1.10
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1000Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1000Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1000Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1000DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
1000 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Page 7
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
1050 Series
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1050CBABABAA1050CBABABAA1050CBABABAA1050CBABABAA 1/4 ” 1/4 ” 30.00 60.00 89.00 4.00 Kg. 0,51
1050CCACABAA1050CCACABAA1050CCACABAA1050CCACABAA 3/8 ” 3/8 ” 30.00 60.00 89.00 4.00 Kg. 0.51
1050CDADABAA1050CDADABAA1050CDADABAA1050CDADABAA 1/2 ” 1/2 ” 30.00 60.00 89.00 4.00 Kg. 0.51
1050CEAEABAA1050CEAEABAA1050CEAEABAA1050CEAEABAA 3/4 ” 3/4 ” 40.00 65.00 99.00 4.00 Kg. 0.73
1050CGAGABAA1050CGAGABAA1050CGAGABAA1050CGAGABAA 1 ” 1 ” 50.00 75.00 109.00 6,50 Kg. 1.13
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1050DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 8
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1100CBABABAA1100CBABABAA1100CBABABAA1100CBABABAA 1/4 ” 1/4 ” 30.00 60.00 89.00 4.00 Kg. 0,48
1100CCACABAA1100CCACABAA1100CCACABAA1100CCACABAA 3/8 ” 3/8 ” 30.00 65.00 89.00 4.00 Kg. 0.48
1100CDADABAA1100CDADABAA1100CDADABAA1100CDADABAA 1/2 ” 1/2 ” 30.00 70.00 89.00 4.00 Kg. 0.48
1100CEAEABAA1100CEAEABAA1100CEAEABAA1100CEAEABAA 3/4 ” 3/4 ” 40.00 70.00 99.00 4.00 Kg. 0.70
1100CGAGABAA1100CGAGABAA1100CGAGABAA1100CGAGABAA 1 ” 1 ” 50.00 80.00 109.00 6,50 Kg. 1.10
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1100Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1100Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1100Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1100DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
1100 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Page 9
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1150CBABABAA1150CBABABAA1150CBABABAA1150CBABABAA 1/4 ” 1/4 ” 30.00 70.00 89.00 4.00 Kg. 0,53
1150CCACABAA1150CCACABAA1150CCACABAA1150CCACABAA 3/8 ” 3/8 ” 30.00 70.00 89.00 4.00 Kg. 0.53
1150CDADABAA1150CDADABAA1150CDADABAA1150CDADABAA 1/2 ” 1/2 ” 30.00 70.00 89.00 4.00 Kg. 0.53
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1150Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1150Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1150Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1150DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
1150 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 10
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
1200 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1200CBABABAA1200CBABABAA1200CBABABAA1200CBABABAA 1/4 ” 1/4 ” 30.00 70.00 89.00 4.00 Kg. 0,53
1200CCACABAA1200CCACABAA1200CCACABAA1200CCACABAA 3/8 ” 3/8 ” 30.00 70.00 89.00 4.00 Kg. 0.53
1200CDADABAA1200CDADABAA1200CDADABAA1200CDADABAA 1/2 ” 1/2 ” 30.00 70.00 89.00 4.00 Kg. 0.53
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1200Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1200Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1200Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1200DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 11
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1250CBABABAA1250CBABABAA1250CBABABAA1250CBABABAA 1/4 ” 1/4 ” 30.00 70.00 89.00 4.00 Kg. 0,53
1250CCACABAA1250CCACABAA1250CCACABAA1250CCACABAA 3/8 ” 3/8 ” 30.00 75.00 89.00 4.00 Kg. 0.53
1250CDADABAA1250CDADABAA1250CDADABAA1250CDADABAA 1/2 ” 1/2 ” 30.00 80.00 89.00 4.00 Kg. 0.53
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1250Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1250Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1250Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1250DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
1250 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 12
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
1300 Series
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD WeightWeightWeightWeight Inlet / OutletInlet / OutletInlet / OutletInlet / Outlet
1300CBABABAA1300CBABABAA1300CBABABAA1300CBABABAA 1/4 ” NPT MALE INLET
3 x 1/4 ” NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0,82
1300CDADABAA1300CDADABAA1300CDADABAA1300CDADABAA 1/2 ” NPT MALE INLET
3 x 1/2 ” NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0.82
1300CEAEABAA1300CEAEABAA1300CEAEABAA1300CEAEABAA 3/4 ” NPT MALE INLET
3 x 1/2 ” NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0.82
Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1300the code, i.e. 1300the code, i.e. 1300the code, i.e. 1300DDDDBABABAABABABAABABABAABABABAA
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug ---- BleederBleederBleederBleeder
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Multiport Gauge Valves
This needle valve is equipped with three threaded female outlets that allow to fix the gauge in the most appropriate position or to install even a master gauge at the same time. Complete with standard PTFE gland packing and self centering non-rotating stem which gives the user assurance of bubble tight seat shut off. Both 1/2 ” and 3/4 ” have 1/2 ” side ports. Compact 1/4 ” all around version is available as well as other options such as locking devices.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 13
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD WeightWeightWeightWeight Inlet / OutletInlet / OutletInlet / OutletInlet / Outlet
1304CBABABAA1304CBABABAA1304CBABABAA1304CBABABAA 1/4 ” NPT FEMALE INLET
3 x 1/4 ” NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0,82
1304CDADABAA1304CDADABAA1304CDADABAA1304CDADABAA 1/2 ” NPT FEMALE INLET
3 x 1/2 ” NPT FEMALE OUTLETS 30.00 120.00 89.00 35.00 Kg. 0.82
Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1304the code, i.e. 1304the code, i.e. 1304the code, i.e. 1304DDDDBABABAABABABAABABABAABABABAA
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug ---- BleederBleederBleederBleeder
OrificeOrificeOrificeOrifice
4.00
4.00
1304 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Multiport Gauge Valves
This needle valve is equipped with three threaded female outlets that allow to fix the gauge in the most appropriate position or to install even a master gauge at the same time. Complete with standard PTFE gland packing and self centering non-rotating stem which gives the user assurance of bubble tight seat shut off. Both 1/2 ” and 3/4 ” have 1/2 ” side ports. Compact 1/4 ” all around version is available as well as other options such as locking devices.
Page 14
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1400CBABABAA1400CBABABAA1400CBABABAA1400CBABABAA 1/4 ” 1/4 ” 30.00 70.00 89.00 4.00 Kg. 0,53
1400CCACABAA1400CCACABAA1400CCACABAA1400CCACABAA 3/8 ” 3/8 ” 30.00 70.00 89.00 4.00 Kg. 0.53
1400CDADABAA1400CDADABAA1400CDADABAA1400CDADABAA 1/2 ” 1/2 ” 30.00 70.00 89.00 4.00 Kg. 0.53
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1400Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1400Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1400Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1400DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
1400 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 15
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
1450 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1450CBABABAA1450CBABABAA1450CBABABAA1450CBABABAA 1/4 ” 1/4 ” 30.00 70.00 89.00 4.00 Kg. 0,56
1450CCACABAA1450CCACABAA1450CCACABAA1450CCACABAA 3/8 ” 3/8 ” 30.00 70.00 89.00 4.00 Kg. 0.56
1450CDADABAA1450CDADABAA1450CDADABAA1450CDADABAA 1/2 ” 1/2 ” 30.00 70.00 89.00 4.00 Kg. 0.56
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1450DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 16
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1550CBABABAA1550CBABABAA1550CBABABAA1550CBABABAA 1/4 ” 1/4 ” 30.00 50.00 40.00 4.00 Kg. 0,68
1550CCACABAA1550CCACABAA1550CCACABAA1550CCACABAA 3/8 ” 3/8 ” 30.00 50.00 40.00 4.00 Kg. 0.68
1550CDADABAA1550CDADABAA1550CDADABAA1550CDADABAA 1/2 ” 1/2 ” 30.00 50.00 40.00 4.00 Kg. 0.68
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1550Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1550Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1550Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1550DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
DDDD
99.00
99.00
99.00
1550 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi / 90°
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 17
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
1600 Series
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
1600CBABABAA1600CBABABAA1600CBABABAA1600CBABABAA 1/4 ” 1/4 ” 30.00 50.00 50.00 4.00 Kg. 0,78
1600CCACABAA1600CCACABAA1600CCACABAA1600CCACABAA 3/8 ” 3/8 ” 30.00 50.00 50.00 4.00 Kg. 0.78
1600CDADABAA1600CDADABAA1600CDADABAA1600CDADABAA 1/2 ” 1/2 ” 30.00 50.00 50.00 4.00 Kg. 0.78
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1600Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1600Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1600Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 1600DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
DDDD
109.00
109.00
109.00
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Needle Valves 6,000 psi & 10,000 psi / 90°
Bar stock needle valves are designed for operation up to 10,000 psi rating. With standard PTFE stem packing & self centering non-rotating stem, our needle valves give in service total sealing security and easy manoeuvrability.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 18
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet
2000CBABABAA2000CBABABAA2000CBABABAA2000CBABABAA 1/4 ” 30.00 120.00 89.00 4.00 Kg. 0,87
2000CDADABAA2000CDADABAA2000CDADABAA2000CDADABAA 1/2 ” 30.00 120.00 89.00 4.00 Kg. 0.87
Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2000the code, i.e. 2000the code, i.e. 2000the code, i.e. 2000DDDDBABABAABABABAABABABAABABABAA
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
1/4 ”
1/2 ”
OutletOutletOutletOutlet DDDD
89.00
89.00
2000 Series
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Two Valve Manifolds
6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.
FLOWFLOWFLOWFLOW
TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 19
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
2002 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet OutletOutletOutletOutlet
2002CDADABAAA2002CDADABAAA2002CDADABAAA2002CDADABAAA 1/2 ” 1/2 ” 30.00 120.00 148.00 4.00 Kg. 0.88
Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2002code, i.e. 2002code, i.e. 2002code, i.e. 2002DDDDDADABAADADABAADADABAADADABAA Material of construction can be supplied to meet the Material of construction can be supplied to meet the Material of construction can be supplied to meet the Material of construction can be supplied to meet the requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Two Valve Manifolds
6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 20
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
2003 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2003CBABABAA2003CBABABAA2003CBABABAA2003CBABABAA 1/4 ” 1/4 ” 30.00 120.00 148.00 4.00 Kg. 0,88
2003CDADABAA2003CDADABAA2003CDADABAA2003CDADABAA 1/2 ” 1/2 ” 30.00 120.00 148.00 4.00 Kg. 0.88
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2003200320032003DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
E
F
Two Valve Manifolds
6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.
Page 21
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2050CBABABAA2050CBABABAA2050CBABABAA2050CBABABAA 1/4 ” 1/4 ” 30.00 60.00 50.00 168.00 4.00 Kg. 0,90
2050CDADABAA2050CDADABAA2050CDADABAA2050CDADABAA 1/2 ” 1/2 ” 30.00 60.00 50.00 168.0 4.00 Kg. 0.90
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2050DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
EEEE FFFF
35.00 35.00
35.00 35.00
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
E
F
Two Valve Manifolds 6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.
2050 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Page 22
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
2052 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C FFFF Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2052CBABABAA2052CBABABAA2052CBABABAA2052CBABABAA 1/4 ” 1/4 ” 30.00 65.00 50.00 22.00 4.00 Kg. 0,81
2052CDADABAA2052CDADABAA2052CDADABAA2052CDADABAA 1/2 ” 1/2 ” 30.00 65.00 50.00 22.00 4.00 Kg. 0,81
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2052Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2052Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2052Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2052DDDDBABABAA Included accessories:BABABAA Included accessories:BABABAA Included accessories:BABABAA Included accessories: Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet ---- PluPluPluPlugggg the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575
GGGG HHHH
30.00
27.00
30.00
27.00
LLLL MMMM
103.00 89.00
103.00 89.00
IIII
30.00
30.00
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
E
F
Two Valve Manifolds 6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.
Page 23
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C OrificeOrificeOrificeOrifice WeightWeightWeightWeight InletInletInletInlet OutletOutletOutletOutlet
2055CDADABAA2055CDADABAA2055CDADABAA2055CDADABAA 1/2 ” 1/2 ” 30.00 100.00 148.00 4.00 Kg. 0.87
Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2055code, i.e. 2055code, i.e. 2055code, i.e. 2055DDDDDADABAADADABAADADABAADADABAA Material of construction can be supplied to meet theMaterial of construction can be supplied to meet theMaterial of construction can be supplied to meet theMaterial of construction can be supplied to meet the requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01requirements of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Two Valve Manifolds
6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.
FLOWFLOWFLOWFLOW
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
2055 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Page 24
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
2150 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2150CBAHHBAA2150CBAHHBAA2150CBAHHBAA2150CBAHHBAA 1/4 ” Flanged 32.00 65.00 70.00 49.00 32.00 18.00 7.00 124.00 124.00 4.00 Kg. 1.35
2150CDAHHBAA2150CDAHHBAA2150CDAHHBAA2150CDAHHBAA 1/2 ” Flanged 32.00 65.00 70.00 49.00 32.00 18.00 7.00 124.00 124.00 4.00 Kg. 1.35
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2150215021502150DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Two Valve Manifolds 6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.
Page 25
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
2151 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2151CBAHHBAA2151CBAHHBAA2151CBAHHBAA2151CBAHHBAA 1/4 ” Flanged 32.00 63.00 70.00 40.00 18.00 55.00 41.40 188.00 124.00 4.00 Kg. 1.35
2151CDAHHBAA2151CDAHHBAA2151CDAHHBAA2151CDAHHBAA 1/2 ” Flanged 32.00 63.00 70.00 40.00 18.00 55.00 41.40 188.00 124.00 4.00 Kg. 1.35
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2151215121512151DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: • PlugPlugPlugPlug • Gasket no. 1Gasket no. 1Gasket no. 1Gasket no. 1 • Screw CS no. 2Screw CS no. 2Screw CS no. 2Screw CS no. 2
Two Valve Manifolds 6.000 psi & 10.000
This series of two-valve manifolds combines valves into one block to perform isolation, bleed and calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms including NPT, BSPT and BSPP. Several models of brackets are supplied to realize the installation both in site and on panels.
FLOWFLOWFLOWFLOW
Page 26
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Notes
Page 27
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
2250 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Two Valve Manifolds 6.000 psi & 10.000 psi / 90°
This series of two-valve manifolds combines valves into one block to perform isolation, bleed ad calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded .
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2250CBABABAA2250CBABABAA2250CBABABAA2250CBABABAA 1/4 ” 1/4 ” 30.00 60.00 50.00 109.00 119.00 4.00 Kg. 1.35
2250CDADABAA2250CDADABAA2250CDADABAA2250CDADABAA 1/2 ” 1/2 ” 30.00 60.00 50.00 109.00 119.00 4.00 Kg. 1.35
Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2250i.e. 2250i.e. 2250i.e. 2250DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- Plug Plug Plug Plug
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 28
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
2350 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2350CBAHHBAA2350CBAHHBAA2350CBAHHBAA2350CBAHHBAA 1/4 ” Flanged 32.00 70.00 65.00 27.00 12.00 30.00 18.00 172.00 4.00 Kg. 1.28
2350CDAHHBAA2350CDAHHBAA2350CDAHHBAA2350CDAHHBAA 1/2 ” Flanged 32.00 70.00 65.00 27.00 12.00 30.00 18.00 172.00 4.00 Kg. 1.28
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2350Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2350Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2350Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2350DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Two Valve Manifolds 6.000 psi & 10.000 psi / 90°
This series of two-valve manifolds combines valves into one block to perform isolation, bleed ad calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded .
Page 29
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
2450CBABABAA2450CBABABAA2450CBABABAA2450CBABABAA 1/4 ” 1/4 ” 70.00 109.00 112.00 4.00 Kg. 1.28
2450CDADABAA2450CDADABAA2450CDADABAA2450CDADABAA 1/2 ” 1/2 ” 70.00 109.00 112.00 4.00 Kg. 1.28
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 2450DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
2450 Series TWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLSTWO VALVE MANIFOLS
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Two Valve Manifolds 6.000 psi & 10.000 psi / Forged
This series of two-valve manifolds combines valves into one block to perform isolation, bleed ad calibration of pressure trasmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded .
Page 30
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3000 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Three Valve Manifolds 6.000
psi & 10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE----FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3000CBABABAA3000CBABABAA3000CBABABAA3000CBABABAA 1/4 ” 1/4 ” 30.00 104.00 50.00 217.00 54.00 22.00 4.00 Kg. 1.75
Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories: i.e. 3000i.e. 3000i.e. 3000i.e. 3000DDDDBABABAA BABABAA BABABAA BABABAA ---- PlugsPlugsPlugsPlugs Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575
GG GG
EE EE
CC CC
FF FF
AA AA
DD DD
BB BB
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 31
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
3001 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Three Valve Manifolds 6.000
psi & 10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD E E E E ---- FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3001CDADABAA3001CDADABAA3001CDADABAA3001CDADABAA 1/2 ” 1/2 ” 30.00 110.00 50.00 223.00 54.00 40.00 4.00 Kg. 1.45
Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories:Note: For 10,000 psi version select “ D ” as first letter of the code, Included accessories: i.e. 3001i.e. 3001i.e. 3001i.e. 3001DDDDDADABAA No. 2 PlugsDADABAA No. 2 PlugsDADABAA No. 2 PlugsDADABAA No. 2 Plugs Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75757575
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 32
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
3050 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3050CBAHHBAA3050CBAHHBAA3050CBAHHBAA3050CBAHHBAA 1/4 ” Flanged 32.00 96.00 70.00 54.00 35.00 30.00 41.40 124.00 4.00 Kg. 2.03
3050CDAHHBAA3050CDAHHBAA3050CDAHHBAA3050CDAHHBAA 1/2 ” Flanged 32.00 96.00 70.00 54.00 35.00 30.00 41.40 124.00 4.00 Kg. 2.03
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3050Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3050DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
LLLL
214.00
214.00
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Three Valve Manifolds 6.000 psi & 10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Page 33
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Notes
Page 34
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3100 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3100CBABABAA3100CBABABAA3100CBABABAA3100CBABABAA 1/4 ” 1/4 ” 30.00 104.00 50.00 54.00 54.00 74.00 22.0 16.00 217.00 4.00 Kg. 2.03
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3100Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3100Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3100Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3100DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Three Valve Manifolds 6.000 psi & 10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Page 35
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3150 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3150CBAHHBAA3150CBAHHBAA3150CBAHHBAA3150CBAHHBAA 1/4 ” Flanged 32.00 106.00 70.00 84.00 54.00 35.00 30.0 41.40 4.00 Kg. 2.04
3150CDAHHBAA3150CDAHHBAA3150CDAHHBAA3150CDAHHBAA 1/2 ” Flanged 32.00 106.00 70.00 84.00 54.00 35.00 30.0 41.40 4.00 Kg. 2.04
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3150Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3150Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3150Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3150DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
LLLL
224.00
224.00
MMMM
124
124
Three Valve Manifolds 6.000 psi & 10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 36
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3250 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3250CBAHHBAA3250CBAHHBAA3250CBAHHBAA3250CBAHHBAA 1/4 ” Flanged 32.00 120.00 70.00 54.00 41.40 90.00 30.0 91.00 238.00 4.00 Kg. 2.39
3250CDAHHBAA3250CDAHHBAA3250CDAHHBAA3250CDAHHBAA 1/2 ” Flanged 32.00 106.00 70.00 84.00 54.00 35.00 30.0 41.40 224.00 4.00 Kg. 2.39
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3250Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3250Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3250Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3250DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
Three Valve Manifolds 6.000 psi &
10.000 psi
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 37
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3450 Series
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3450CHHHHBAA3450CHHHHBAA3450CHHHHBAA3450CHHHHBAA Flanged Flanged 101.00 54.00 216.00 4.00 Kg. 2.50
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3450DDDDHHHHBAAHHHHBAAHHHHBAAHHHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
DDDD
82.00
Three Valve Manifolds 6.000 psi & 10.000 psi / Forged
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs
THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Page 38
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
3451 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3451CDAHHBAA3451CDAHHBAA3451CDAHHBAA3451CDAHHBAA 1/2 ” Flanged 94.00 54.00 212.00 4.00 Kg. 2.40
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3451Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3451Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3451Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3451DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
DDDD
86.00
3451CBAHHBAA3451CBAHHBAA3451CBAHHBAA3451CBAHHBAA 1/4 ” Flanged 94.00 54.00 212.00 86.00 4.00 Kg. 2.40
Three Valve Manifolds 6.000 psi & 10.000 psi / Forged
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Page 39
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
3452 Series Three Valve Manifolds 6.000 psi & 10.000 psi / Forged
The three Valve manifolds are used with differential pressure trasmitters. In a single block the functions of interception and balancing are gathered. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs
THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3452CDAHHBAA3452CDAHHBAA3452CDAHHBAA3452CDAHHBAA 1/2 ” Flanged 94.00 54.00 212.00 4.00 Kg. 2.40
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3452Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3452Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3452Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3452DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
DDDD
73.00
3452CBAHHBAA3452CBAHHBAA3452CBAHHBAA3452CBAHHBAA 1/4 ” Flanged 94.00 54.00 212.00 73.00 4.00 Kg. 2.40
Page 40
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
3550 Series THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Three Valve Manifolds 6.000 psi & 10.000 psi / Coplanar
The Three Valve Manifolds, that concentrate the functions of interception and balancing in a single block, are used with differential pressure transmitters. They are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
3550CBAHLBAA3550CBAHLBAA3550CBAHLBAA3550CBAHLBAA 1/4 ” Coplanar 130.00 70.00 54.00 41.30 85.00 129.00 235.00 4.00 Kg. 2.45
3550CDAHLBAA3550CDAHLBAA3550CDAHLBAA3550CDAHLBAA 1/2 ” Coplanar 130.00 70.00 54.00 41.30 85.00 129.00 235.00 4.00 Kg. 2.45
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 3550355035503550DDDDBAHLBAABAHLBAABAHLBAABAHLBAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugPlugPlugPlug
Page 41
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
THREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLSTHREE VALVE MANIFOLS
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
5000 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Five Valve Manifolds 6.000 psi & 10.000 psi
The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
EEEE
LLLL
IIII HHHH GGGG FFFF
CCCC
AAAA
BBBB
FFFF
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5000CBABABAA5000CBABABAA5000CBABABAA5000CBABABAA 1/4 ” 1/4 ” 32.00 70.00 142.00 129.00 260.00 110.00 75.00 4.00 Kg. 2.80
5000CDADABAA5000CDADABAA5000CDADABAA5000CDADABAA 1/2 ” 1/2 ” 32.00 70.00 142.00 129.00 260.00 110.00 75.00 4.00 Kg. 2.80
Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5000i.e. 5000i.e. 5000i.e. 5000DDDDBABABAABABABAABABABAABABABAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs
HHHH IIII LLLL MMMM
54.00 30.00 20.00 41.00
54.00 30.00 20.00 41.00
Page 42
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
5050 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Five Valve Manifolds 6.000 psi & 10.000 psi The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
LLLL MMMM
DDDD
GGGG
IIII
HHHH
FFFF
EEEE
BBBB
CCCC
AAAA
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5050CBAHHBAA5050CBAHHBAA5050CBAHHBAA5050CBAHHBAA 1/4 ” Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.00 4.00 Kg. 2.80
5050CDAHHBAA5050CDAHHBAA5050CDAHHBAA5050CDAHHBAA 1/2 ” Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.00 4.00 Kg. 2.80
Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5050i.e. 5050i.e. 5050i.e. 5050DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs
HHHH IIII LLLL MMMM
124.00 260.00 10.50 16.00
124.00 260.00 10.50 16.00
Page 43
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Notes
Page 44
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
FLOWFLOWFLOWFLOW
5150 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Five Valve Manifolds 6.000 psi & 10.000 psi / 90° The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH LLLL Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5150CBAHIBAA5150CBAHIBAA5150CBAHIBAA5150CBAHIBAA 1/4 ” Flanged 32.00 148.00 90.00 54.00 41.40 40.00 91.0 118.00 258.00 4.00 Kg. 2.70
5150CDAHIBAA5150CDAHIBAA5150CDAHIBAA5150CDAHIBAA 1/2 ” Flanged 32.00 148.00 90.00 54.00 41.40 40.00 91.0 118.00 258.00 4.00 Kg. 2.70
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5150515051505150DDDDBAHIBAABAHIBAABAHIBAABAHIBAA Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of Material of construction can be supplied to meet the requirements of NACE MR 01NACE MR 01NACE MR 01NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Page 45
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
FLOWFLOWFLOWFLOW
5450 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5450CBAHHBAA5450CBAHHBAA5450CBAHHBAA5450CBAHHBAA 1/4 ” Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.0 124.00 4.00 Kg. 2.70
5450CDAHHBAA5450CDAHHBAA5450CDAHHBAA5450CDAHHBAA 1/2 ” Flanged 32.00 142.00 70.00 102.00 54.00 41.40 30.0 124.00 4.00 Kg. 2.70
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5450Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5450DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01Material of construction can be supplied to meet the requirements of NACE MR 01----75757575
LLLL
260.00
260.00
Five Valve Manifolds 6.000 psi & 10.000 psi
The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
Page 46
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Features
• Tee bar easy manoeuvrability with minimum effort • PTFE packing standard, optional graphoil • Stainless steel costruction as standard, optional: See material list • Colour coded functional identification • Externally adjustable gland • Variety of end connections • Dust cap to prevent contaminations on the operating
thread
Five Valve Manifolds 6,000 psi & 10,000 psi The Five Valve Manifolds that concentrate in a single block the functions of interception, balancing and drain, are designed to allow both direct and remote mounting. Mounting brackets are available on demand.
FLOWFLOWFLOWFLOW
5600 Series FIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLSFIVE VALVE MANIFOLS
Specifications
• Pressure up to 10,000 Psi ( 690 Bar ) • Temperature rating PTFE packing from –73°C to +210°
C ( -99°F / + 410°F ) • Temperature rating GRAPHOIL packing from –54° C to + 510° C ( -65°F / + 950°F ) • Standard orifice diameter 4.0 mm • Standard 316L stainless steel
Order code Order code Order code Order code ConnectionsConnectionsConnectionsConnections
AAAA B B B B C C C C DDDD EEEE FFFF GGGG HHHH Orifice Orifice Orifice Orifice WeightWeightWeightWeight
Inlet Inlet Inlet Inlet OutletOutletOutletOutlet
5600CBAHHBAA5600CBAHHBAA5600CBAHHBAA5600CBAHHBAA 1/4 ” Flanged 32.00 150.00 110.00 54.00 41.40 30.00 255.0 124.00 4.00 Kg. 2.70
5600CDAHHBAA5600CDAHHBAA5600CDAHHBAA5600CDAHHBAA 1/2 ” Flanged 32.00 148.00 90.00 54.00 41.40 40.00 91.0 118.00 4.00 Kg. 2.70
Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. Note: For 10,000 psi version select “ D ” as first letter of the code, i.e. 5600560056005600DDDDBAHHBAABAHHBAABAHHBAABAHHBAA Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet Material of construction can be supplied to meet the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01the requirements of NACE MR 01----75 75 75 75
Included accessories:Included accessories:Included accessories:Included accessories: ---- PlugsPlugsPlugsPlugs
Page 47
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Special Items
15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed15,000 psi Double Block & Bleed
DistributorsDistributorsDistributorsDistributors
DBBDBBDBBDBB Safety systemsSafety systemsSafety systemsSafety systems
Distribution and control panelDistribution and control panelDistribution and control panelDistribution and control panel
Page 48
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Special Items
Socket Weld VersionSocket Weld VersionSocket Weld VersionSocket Weld Version
DistributorsDistributorsDistributorsDistributors
Flanged ValvesFlanged ValvesFlanged ValvesFlanged Valves O.S.&.Y. Needle ValvesO.S.&.Y. Needle ValvesO.S.&.Y. Needle ValvesO.S.&.Y. Needle Valves
Flanged/Flanged Needle ValvesFlanged/Flanged Needle ValvesFlanged/Flanged Needle ValvesFlanged/Flanged Needle Valves
Page 49
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Brackets
Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540/11Model: A0540/11Model: A0540/11Model: A0540/11
Three Valve ManifoldsThree Valve ManifoldsThree Valve ManifoldsThree Valve Manifolds Model: A0540/04Model: A0540/04Model: A0540/04Model: A0540/04
Three Valve ManifoldsThree Valve ManifoldsThree Valve ManifoldsThree Valve Manifolds Model: A0540/07Model: A0540/07Model: A0540/07Model: A0540/07
Three Valve ManifoldsThree Valve ManifoldsThree Valve ManifoldsThree Valve Manifolds Model: A0540/04Model: A0540/04Model: A0540/04Model: A0540/04
Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540/06Model: A0540/06Model: A0540/06Model: A0540/06
Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540/08Model: A0540/08Model: A0540/08Model: A0540/08
Two Valve ManifoldsTwo Valve ManifoldsTwo Valve ManifoldsTwo Valve Manifolds Model: A0540/10Model: A0540/10Model: A0540/10Model: A0540/10
Five Valve ManifoldsFive Valve ManifoldsFive Valve ManifoldsFive Valve Manifolds Model: A0540/04Model: A0540/04Model: A0540/04Model: A0540/04
Five Valve ManifoldsFive Valve ManifoldsFive Valve ManifoldsFive Valve Manifolds Model: A0540/04Model: A0540/04Model: A0540/04Model: A0540/04
Page 50
Rev. 0 Rev. 0 Rev. 0 Rev. 0 ---- 2012201220122012
Notes