01a - UniSec MV AIS - External - ABB

—F&B CUSTOMER DAY 2019 | MAKASSAR, MARCH 28TH, 2019

UniSecHigh performance and slim medium voltage switchgearProduct overview – Mohamad Soleh / Herlangga Arisanto

—UniSec - MV Air Insulated Switchgear for Secondary Distribution

April 1, 2019 Slide 2

Secondary Distribution

General product positioning

Distribution

Transmission

Power Station

Substation HV

CommercialCustomer

ResidentialCustomer

Primary Substation HV/MV

SecondarySubstation MV/LV



IndustrialCustomer



Secondary Distribution

General product positioning - Applications



Description

UniSec air-insulated switchgear is based on a highly flexible, modular concept with fewer parts and standardized solutions that can be readily configured to meet the specific needs of each application.

Key features

– Designed & Tested acc. to latest IEC 62271-200, GOST (RU) & GB (CN) Stds

– Internal arc proof IAC AF/AFL/AFLR with different gas exhausting variants

– Loss of Service Continuity LSC2B/ LSC2A/LSC2 solutions available

– Partition Metallic PM Classification

– Load Break Switch, Vacuum Contactor, Vacuum and SF6 Circuit Breakers

– Anti-Seismic and Marine version available

Safe conditions for all applications

UniSec

Ratings

Rated Voltage up to 24kV

Rated Current up to 1250A

Rated short-time withstand current & IAC

up to 25kA @ 12-17kVup to 21kA @ 24kV

Rated Frequency 50Hz / 60Hz

Product Overview

—

Values

UniSec - MV Air Insulated Switchgear for Secondary Distribution


Maximizing your output

– Easy to Install

– Broad portfolio

– Speed up your projects

Protecting your assets

– Safety and Protection for the operator

– Reliable in harsh environment

Optimizing your investments

– Footprint reduction

– Sustainable

Its strengths, Your benefits

Productivity and Flexibility Reliability and Safety Sustainability and Efficiency

—

Values - Productivity and Flexibility



Different Swg room layout to use different Internal Arc exhaust types: (only IAC versions available)

1. IAC AF up to 16kA 1s as base proposal and pressure relief inside the room

2. IAC AFL up to 12,5kA 1s with pressure relief into arc chamber built using wall on the rear of the Swg

3. IAC AFLR up to 21kA 1s with arc gas absorbers (filters) and pressure relief inside the Swg room or downward into cable trench. (25kA 1s for LSC2B panels 12-17.5kV)

4. IAC AFLR up to 21kA 1s with arc gas duct and pressure relief outside the Swg room(25kA 1s for LSC2A W750-H2.000mm panels 12kV and LSC2B panels 12-17.5kV)

Easy to install

1 2

3 4

—




Different projects line-up to be covered with more than 20 typical panels:

– Units with switch disconnectors

– Units with fused switch disconnector

– Units with frontal withdrawable circuit breaker or contactor

– Metering units

– Units with switch disconnector and fixed/ removable/withdrawable circuit breaker

Broad portfolio

—




Broad portfolio

—




Different accessibility to the plant assured by:

– Different Loss of Service Continuity LSC2A/LSC2B

– Partition Metallic

– Withdrawable Circuit Breaker

– Different breaking technologies

Broad portfolio

LSC2A

for Switch Disconnector units with Fixed, Removable or Withdrawable Circuit-Breakers

2 main MV compartments (segregated by Switch Disconnector):1. Busbars2. Circuit-Breakers, Fuses, etc…

Accessibility to Apparatus compartment with service continuity of Busbars compartment and adjacent panels.

PM

Metallic Partition between compartments given by Apparatus(GSec or HySec)

2

1

—









Broad portfolio

LSC2A panel type can fit

– Switch Disconnector type GSec (SF6)– Removable or Withdrawable Circuit-Breaker type HD4/R-Sec (SF6) – Removable or Withdrawable Circuit-Breaker type VD4/R-Sec* (Vacuum)

* also VD4/L-Sec for SBS panel Coupler type

– Fixed Multifunctional apparatus type HySec (Vacuum CB & SF6 Disconnector)

VD4/R-Sec

(*) picture with on board relay

HD4/R-SecGSec HySec

—









Broad portfolio

1. Relay on board2. Closing pushbutton3. Opening pushbutton4. Open/closed indicator5. Built-it charging lever6. Spring status indication10.Operation counter11. Key lock12. UR mechanical override

1. Lever seat, line operating2. Lever seat, earth operating with keys3. Mimic diagram (dynamic)4. Operating mechanism push-

buttons (only 2S versions)5. Voltage signalling device6. Spring status indication

(only 2S versions)7. Blown fuses indicator

(only fused version)8. Lock for Padlocks

Click for Operating sequence Video

https://search-ext.abb.com/library/Download.aspx?DocumentID=2RDA029747&LanguageCode=en&DocumentPartId=&Action=Launch

—









Broad portfolio

LSC2B

for frontal Withdrawable Circuit-Breakers and Contactors units.

3 main MV compartments (segregated by shutters):1. Busbars 2. Cables3. Circuit-Breakers

Accessibility to CB compartment with service continuity of Busbars and Cables compartments and adjacent panels where is required high service continuity and high ratings

PM Metallic Partition between compartments @ 12-17.5kV

PI Insulated Partition between compartments @ 24kV

1

3

2

—









Broad portfolio

LSC2B panel type can fit

– Withdrawable Circuit-Breaker type VD4/P 12-17.5kV and VD4/Sec 24kV

– Withdrawable Circuit-Breaker type HD4/Sec– Withdrawable Contactor type VSC/P 7.2-12kV

—









Broad portfolioA. Aux. contactsB. Motor chargingC. Built-in charging leverD. Open/closed indicatorE. Operation counterF. Plug-socket connectorsG. Spring status indicationH. Service releaseI. Closing pushbuttonL. Opening pushbutton

1

1. Key free with ES open2. Key free with truck in service3. Key free with ES closed4. ES position indicator

2

34

—




LSC2B and LSC2A panels can be mixed in the same Swg line-up

– All panel types (LSC2A and LSC2B) in the same Swg line-up

– Adaptor panel (H2.000mm) needed to adjust busbars height

– Adaptor panels can be used as Incoming/Outgoing

– Both Filters and Gas Duct are available when mixing different LSC panel type

Broad portfolio

—




SBC-W details

Single cover without screws and mechanically interlocked with GSec Earth position

From bolt connection to n°6 sliding contactsSafety truck lock/unlock with a lever

Fast CB withdraw in 1 minute:

– where technical specification asks for withdrawn feature

– to quickly replace CB in case of need

– to have a complete access to the cables compartment for quick and easy cables connections

Click to play videoClick for brochure

https://search-ext.abb.com/library/Download.aspx?DocumentID=1VCP000551&LanguageCode=en&DocumentPartId=&Action=Launch

https://search-ext.abb.com/library/Download.aspx?DocumentID=1VCP000547 2015.10&LanguageCode=en&DocumentPartId=&Action=Launch

—




Scalable LV compartments

According to requests and different engineering content are available scalable LV compartments

Can be integrated in standard design, IEC61850 communication with GOOSE messaging and Interlocks

LSC2A Panels LSC2B Panels

Standard Wide Big Standard Wide

—




ITs for measuring

Measuring request satisfied with CTs and VTs available in every panel type and position including busbars compartment

Current Transformer basic proposal must be with Ring CTs fitted in the bottom of the unit

Other proposal/combinations with DIN CTs are possible

Ring* CTs DIN CTs Ring* CTs Ring* CTsDIN CTs DIN CTs

DIN VTs* According to cable dimension; alternative with mounting in cable trench is available

——Capabilities MV Switchgear Into IoTSPABB Solution through Relion Series Protection Relay and Zenon Software

—

ABB Distribution Automation (DA)

Mini SCADA Substation


Its strengths, Your benefits

Common features

ABB solutions

Conclusions

Relion 600 Series

Relay ProtectionGrid Automation Controller

COM 600

Arctic 600 series

Gateway & controller wireless

Network Analyzer

M2M Series

ARM 600 M2M Gateway

ServerZenon Scada

—




Reduced Engineering activity and component lead time with Digital version:

IEC61850 communication and GOOSE messaging (ie. ATS)Reduce hard wiring improving reliability and decreasing engineering and on-site activities

Sensorswide dynamic operating field, shorting engineering activities and always with linear response

Toroidal current transformerperfectly working with ABB Relion IEDs; few type to cover the range shorting engineering activities

Digital to Speed up your projects

Click for brochure

Conventional

With GOOSE

https://search-ext.abb.com/library/Download.aspx?DocumentID=1VCP000625&LanguageCode=en&DocumentPartId=&Action=Launch

——Offering for digital medium-voltage switchgearAir-insulated switchgear (AIS) for secondary power distribution

UniSec Digital

Same design platform as conventional UniSec panels offering the

same robustness, safety and user experience 1Suitable for applications up to 24kV

UniSec Digital is available for all UniSec platform switchgear

Low energy output of the sensors without saturation effect

Continuously self-supervised with GOOSE messaging over the

IEC 61850 protocol

UniSec Digital features Relion 615 and 620 series protection and control relays

Easy integration to increase smart functionality, such as remote condition monitoring and asset health for electrical systems as part of ABB Ability offering

–

–

–

–

5

4 1. Relion protection relaywith IEC 61850

2. Current sensors

3. Voltage sensors

4. QR code to easily access digital documentation

5. MySiteCare for predictive maintenance (option)

– 3

–

2

Learn more: ABB Ability™ AIS for MV – UniSec DigitalJanuary 21, 2019 Slide 22

Ratings

Rated Voltage up to 24kV

Rated Current up to 1250A

Rated short-time withstand current & IAC

up to 25kA @ 12-17kVup to 21kA @ 24kV

Rated Frequency 50Hz / 60Hz

https://new.abb.com/medium-voltage/switchgear/air-insulated/iec-and-other-standards/iec-air-insulated-secondary-switchgear-unisec-digital

——Relion® compact Power Management System (cPMS)

COM600

RET615 REG615 REG615 RET615

Optional:REG670 forGeneratorcontrol

REF615 REM615 REU615 REU615 REF615REM615

November 15, 2018 Slide 33

Motor controlFeeder/protection & control

Transformer control/Tap control

Fast, slow and manual load shedding

Power calculationFrequency load shedding *

Example of green field mini scada application (Transformer – Generator - Feeder - Motor)

—

HMI HMIHMI HMI

—ABB zenon solution for Integration Relion & CloudTypical System Architecture to Integration with SCADA System/EMS

Central Control Room / Facility Control Room

EMS Server

(Single/Redundant)

Main Control Building Other Buildings

…OWS2 OWSn

1 EWS1

EMS BackboneFO Cable

(Single/Redundant)

Control NetworkFO Cable

(Single/Redundant)

…

LV PanelsMV Panels MV Panels

Other SubstationLV PanelsLV Panels

Main Substation LV Substation


OWS

——

ABB zenon solutionIoT for your Plant/Building

Flexibility: on-Premisesand offshore Cloud

5 – Plan

production,

handle orders,

optimize

Ubiquity: Information onany browsing device

4 – Plan

Production,

document, control

Quality, KPI

3 – Supervise

2 – Control

1 – Field


ze

no

nA

BB

Ab

ility

Ap

plic

atio

ns

Connect | Collect | Collaborate

zenon

ERPShare

Report

Present

Analyze

Store

Collect

——Smart asset managementMySiteCare & MyRemoteCare

—Asset management & Application areasMySiteCondition

Assets

MySiteCondition methodology can be used for (independent from age, type and brand):

– Medium voltage equipment

– Low voltage equipment

MySiteCondition addresses reliability in a systematic way by analyzing:

– Operational risk of the equipment

– Importance of the equipment

– Product life cycle subjects

– Asset history (including operator interview)

Slide 11July 20, 2017

—

Monitoring main failure causes

MySiteCare


MySiteCare can analyze the following components within a switchgear:

➢ Cables

- Cable joints

➢ Central unit

➢ Busbars

- Busbar joints

- Primary contact joints

Switchgear

—

Monitoring and diagnostic user interface

MySiteCare


Monitored asset nameplate

Traffic light

Estimated health condition for each monitored component

Circuit Breaker monitored values

Switchgear monitored values

MySiteCare hardware status

—

Dashboard

MyRemoteCare web portal


1. Based on access rights, user can see:

– The overall health status of its monitored installed base (pie chart)

– The number of active events, planned maintenance activities, connected monitored devices and gateways

– A map with a colored icon for each plant

2. The field service can immediately check the received event by mail, identifying the asset and the potential issue.

3. In case of an alert, a mail is sent to the relevant users (typically the ABB service team).

– No need to be in front of a screen 24/7, just wait a trigger

——So let’s talk

—

For consultation, please contact:

Slide 36

PT ABB SAKTI INDUSTRI

CCM Building, 7th Floor, Jl. Cikini Raya, No. 95,

Jakarta, 10330 – Indonesia

Attn. : Herlangga Arisanto

E-mail : [email protected]

Tel. : +62 21 2929 0293

Mobile : +62 8119889658

01a - UniSec MV AIS - External - ABB

Documents

Transcript of 01a - UniSec MV AIS - External - ABB