0195MR Cluster Exchange Cat US DEC2015 AW2 Cluster... · 2016-01-06 · 4 / THE CLAW Light weight...
Transcript of 0195MR Cluster Exchange Cat US DEC2015 AW2 Cluster... · 2016-01-06 · 4 / THE CLAW Light weight...
catalog
2 / www.milkrite.com
AUTOMATIC SCHEDULING
When you sign up to the service we take all the details of your herd and parlor size – and calculate for you your planned change dates
On your planned change date fresh, hygienically cleaned clusters arrive, assembled ready to go
Now all you have to do is take off the used clusters, fit the new ones and then give us a call so that we can collect your used clusters
THAT’S IT!
Changing liners is always low down on your activity or priority list so we take out all the effort for you
We make the change process effortless and easy
www.milkrite.com / 3
CLUSTER TECHNOLOGY
… the biggest advance in actually milking the cow in a generation
THE LINER
We use the latest technology to improve milking efficiency and improve teat health.
Improved teat end condition and greatly reduced congestion of the teat
Liners stay on the teats better, with reduced squawks and slips
Dryer teats – because milk is taken away more efficiently Anti-twist feature
PULSATION AND VACUUM CURVES THROUGH THE MILKING CYCLE - AT LOW FLOW
Chart shows reduced vacuum acting on the teat when using Impulse Air which gives improved teat condition
Mouthpiece vacuum - with the vent
Mouthpiece vacuum - without the vent
Vacuum in the claw
Pulsation curve
0
0 1 2
TIME (SEC)
3
50
40
30
20
10
VAC
UU
M (
kPa)
15
12
9
6
3
INC
HES
OF
MER
CU
RY
(inH
g)
4 / www.milkrite.com
THE CLAW
Light weight Ergonomic and unique design making it easy to hold
The Radel® material makes the claw highly impact resistant
Ideally spaced nipples for optimum cluster position and balance
360° milk flow visibility
We replace your air tubes with each change
So no more leaking air tubes!
And don’t forget the Air Tubes
www.milkrite.com / 5
CLUSTER MAINTENANCEWe maintain the cluster for you
Lifetime guarantee on all parts
We maintain the claw
We replace the air tubes with each change
Have you ever thought about the costs you have to pay to maintain your cluster?
A broken claw bowl? Seals that age and break? Air tubes that cut and crack?
Now there are no more costs for replacing or repairing these parts. It’s all inclusive within the service
6 / www.milkrite.com
ACCESSORIESOptions for your cluster
WASH SYSTEM COMPONENTS
Wash cupsJetter cupsDuck bills
TUBING
Upgrade your milk tubing to Ultraclean and we can add this into your exchange program.
Lengths cut to size and ready to go.
Twin air hose sized correctly for your application
Parlors come in many different configurations, these accessories will help ensure your parlor performs at an optimum efficiency
SUPPORT SERVICES Part of our service includes a tune up program for your parlor.
An evaluation of parlor conditions and routines
An assessment of pulsation and vacuum conditions to provide the optimum settings and conditions for output and teat health
This service includes
We work directly with you and your dealer to keep your parlor tuned to your herd.
LINER MAP - TO OPTIMISE PERFORMANCEUse the liner maps to set the optimum conditions to achieve the
desired output with the best teat condition
Set vacuum to achieve bestteat barrel condition
KEY
Good Average Poor
TEAT BARREL CONGESTION
TEAT END / CLAW VACUUM
kPa inHg
34 10.0
36 10.5
37 11.0
39 11.5
41 12.0
42 12.5
44 13.0
46 13.5
47 14.0
TEAT END CONGESTION
B-PHASE SETTINGS
350ms 400ms 450ms 500ms 550ms
70% 74% 77% 80% 81%
73% 77% 80% 81% 82%
75% 79% 82% 84% 84%
78% 82% 84% 86% 86%
82% 85% 87% 88% 88%
85% 88% 90% 91% 91%
89% 91% 93% 94% 93%
93% 95% 96% 97% 96%
97% 99% 100% 100% 99%
Numbers indicate the potential maximum peak flow able to be achieved at these conditions
KEY
Good Average Poor
Set B phase to achieve maximum output without teat end condition issues
www.milkrite.com / 7
USA/CEX/issue 2
www.milkrite.com
MILKRITE EAST Corporate Headquarters
P.O. Box 9, 110 Lincoln Street, Johnson Creek, WI 53038 USAPhone: 1.800.558.0150 / Fax: 1.800.800.5254
MILKRITE WEST Western Supply Center
4824 Enterprise Way Modesto, CA 95356Phone: 1.800.927.4454 / Fax: 1.209.545.0272
The Milkrite name and logo are the registered trademarks of the Avon Rubber p.l.c. group of companies. Avon Rubber p.l.c. Registered in England with number 32965 with its registered office at Hampton Park West, Semington Road, Melksham, Wiltshire, SN12 6NB, UK.
©2013 Avon Rubber p.l.c. All rights reserved.
The information in this document is not binding and can be changed without notice. Parlors and herds vary considerably, so these details are meant to be guidelines to operation only and not a specification. It remains the responsibility of the operator to ensure the correct working of the plant and the health of the animal.
References to other manufacturers by their company names, trademarks or product references are for product identification purposes and are used only to indicate the intended purpose of Milkrite products and their compatibility with the equipment of those manufacturers.