01234'.53,2* - Emitex · 2020. 1. 3. · • /CVV YJKVG PKUJ • Choice of secondary, PSTN and PABX...
Transcript of 01234'.53,2* - Emitex · 2020. 1. 3. · • /CVV YJKVG PKUJ • Choice of secondary, PSTN and PABX...
-
2018/19
The
EMITEX
PRODUCT GUIDE
-
2
EXCEEDING STANDARDSAll of the products surpass ANSI EIA/TIA and ISO 11801 cabling standards, which are essential if the contractor is offering a warranty on the installation. Emitex is also happy to announce that all Emitex data cable will meet the new regulatory requirements by being fully CPR rated.
and accessories, all designed for speed and reliability of operation. This means that the installer can easily obtain the full range of products they need to install, set up and run a state-of-the-art system, all from one place.
What’s more, all Emitex installations come with a full lifetime guarantee on all of the installed products, giving the contractor and end customer peace of mind when the system is up and running.
They can be used in a variety of different installations, from Local Area Networking to CCTV and UPS installations and offer exceptional styling, reliability and performance.
For more information on your local stockist, please contact Emitex at www.emitex.co.uk
ABOUT US
QUALITY GUARANTEEDEmitex was established in 2002, and since then has gone from strength to strength, becoming one of the most recognisable brands in the voice and data networking sector.
It is now stocked in nearly 400 electrical wholesalers across the UK, offering the contractor an immediate solution for all of their data needs.
All of the Emitex data products are manufactured to the highest quality, designed with a host
requirements of the network, and only incorporate solid copper conductors.
-
Emitex Data Products
On all installed Data Cables,
Patch Panels and Modules!
the results submitted to Emitex for approval.
-
4
ABOUT US
EFFICIENT SERVICEany UK mainland address. The standard delivery is two days from receipt of order.
installation location. As the cabinets arrive fully assembled for maximum strength and ease of installation, they can be put to work immediately, saving time and money.
CABINETS ENCLOSURES & ACCESSORIES
‘ALL OF THE EMITEX DATA PRODUCTS ARE DESIGNED WITH A HOST OF KEY BENEFITS FOR THE INSTALLER.’
-
5
CONTENTS
FLOOR CABINETS
6
SERVER CABINETS
7
WALL CABINETS
8
CATEGORY 6
13
TOOLS & TESTERS
16
CATEGORY 5E
10
CATEGORY 5E CABLES
19
CATEGORY 6 & 6A CABLES
FACEPLATES, BLANKS & BACKBOXES
15
20
-
6
Floor Standing CabinetsThe Emitex range of Floor Standing Cabinets offers a cost effective solution to cabling and hardware installations, they offer numerous features that will save time and increase installation options for the user.
All Floor Cabinets supplied with: • Fitted roof fan tray• • • Jacking feet• Heavy duty castors• Front and rear door locks
Features• Lockable quick release smoked glass
front door - Reinforced glass - Removable and reversible
• Lockable quick release metal rear door - Removable and reversible - Removable and lockable side panels
- ‘U’ numbered mounting rails - Removable top and base plates for
easy cable access - Flat pack option available
FREEDELIVERY ON ALL CABINETS ANYWHERE IN THE UK *
CABINETS, ENCLOSURES & ACCESSORIES
EM04.050 18U 600mm Wide x 600mm Deep
EM04.051 22U 600mm Wide x 600mm Deep
EM04.131 27U 600mm Wide x 600mm Deep
EM04.132 32U 600mm Wide x 600mm Deep
EM04.133 37U 600mm Wide x 600mm Deep
EM04.134 42U 600mm Wide x 600mm Deep
EM04.135 47U 600mm Wide x 600mm Deep
EM04.141 27U 800mm Wide x 800mm Deep
EM04.143 37U 800mm Wide x 800mm Deep
EM04.144 42U 800mm Wide x 800mm Deep
EM04.145 47U 800mm Wide x 800mm Deep
Sizes available
*Free delivery applies to anywhere in mainland UK
-
7
Server CabinetsThe Server Cabinet range combines attractive styling with a rugged and toughened steel structure. They are treated with a high quality, durable, powder
are available.
All Server Cabinets supplied with: • Fitted roof fan tray• • • Castors and jacking feet• Front and rear door locks
Features • Lockable quick release smoked glass front door
- Reinforced glass - Removable and reversible
• Lockable quick release metal rear door - Removable and reversible - Removable and lockable side panels
- ‘U’ numbered mounting rails - Removable top and base plates for
easy cable access - Flat pack option available
FREEDELIVERY ON ALL CABINETS ANYWHERE IN THE UK *
CABINETS, ENCLOSURES & ACCESSORIES
EM04.151 27U 600mm Wide x 1000mm Deep
EM04.154 42U 600mm Wide x 1000mm Deep
EM04.161 27U 800mm Wide x 1000mm Deep
EM04.164 42U 800mm Wide x 1000mm Deep
Sizes available
*Free delivery applies to anywhere in mainland UK
-
8
Surge Protected PDUs
enclosure markets. These units will suit Floor Standing or Wall Mounted Cabinets depending on socket choice.
Features • Aluminium extruded case
•
• Neon indicator
• Comp
•
• Flame retardant
• Surge protected
CABINETS, ENCLOSURES & ACCESSORIES
450mm Deep Wall CabinetsFeatures • Quick release reversible front door
• Lockable & removable side panels
• Release using simple slam latches
•
•
• One man installation
• Top & bottom cable entry
•
FREEDELIVERY ON ALL CABINETS ANYWHERE IN THE UK *
EM08.010 6 Way Horizontal Surge Protected PDU
EM08.012 8 Way Vertical Surge Protected PDU
EM08.013 12 Way Vertical Surge Protected PDU
Sizes available
EM04.000 3U 300mm Deep Wall Cabinet
EM04.001 6U 450mm Deep Wall Cabinet
EM04.002 9U 450mm Deep Wall Cabinet
EM04.003 12U 450mm Deep Wall Cabinet
EM04.004 15U 450mm Deep Wall Cabinet
EM04.005 18U 450mm Deep Wall Cabinet
Sizes available
*Free delivery applies to anywhere in mainland UK
-
9
550mm Deep Wall Cabinets
Features • Quick release reversible front door
• Lockable & removable side panels
• Release using simple slam latches
•
•
• Top & bottom cable entry
•
CABINETS, ENCLOSURES & ACCESSORIES
EM04.042 6U 550mm Deep Wall Cabinet
EM04.043 9U 550mm Deep Wall Cabinet
EM04.044 12U 550mm Deep Wall Cabinet
EM04.045 15U 550mm Deep Wall Cabinet
EM04.046 18U 550mm Deep Wall Cabinet
EM04.047 21U 550mm Deep Wall Cabinet
Sizes available
*Free delivery applies to anywhere in mainland UK
FREEDELIVERY ON ALL CABINETS ANYWHERE IN THE UK *
-
10
CATEGORY 5E STRUCTURED CABLING PRODUCTS
Category 5E ModulesFeatures • Category 5E compliant• • Krone termination only• • • Label and protective cover included• UK style Faceplates•
bevelled Faceplate• 50 micron gold plated connection
RJ45 PlugsFeatures • Category 5E compliant• Release latch• Solid conductor cable only• 50 micron gold plating
Features • Category 5E compliant• Slide labelling system• • Krone termination only• • 50 micron gold plated
connection
Category 5E Patch Panels
EM01.001 16 Way 1U Category 5E Patch Panel
EM01.002 24 Way 1U Category 5E Patch Panel
EM01.004 48 Way 2U Category 5E Patch Panel
Sizes available
EM01.005
EM01.006
Sizes available
EM06.004
-
11
CATEGORY 5E STRUCTURED CABLING PRODUCTS
Category 5E Patch Leads CATEGORY 5E 0.5M PATCH LEAD AVAILABLE IN:
RED EM03.006
GREEN EM03.016
YELLOW EM03.021
GREY EM03.001
BLUE EM03.011
Features • Category 5E compliant• 50 micron gold plated RJ45 Plugs• Choice of colours• Individually bagged• •
CATEGORY 5E 1M PATCH LEAD AVAILABLE IN:
RED EM03.007
GREEN EM03.017
YELLOW EM03.022
GREY EM03.002
BLUE EM03.012
CATEGORY 5E 3M PATCH LEAD AVAILABLE IN:
RED EM03.009
GREEN EM03.019
YELLOW EM03.024
GREY EM03.004
BLUE EM03.014
CATEGORY 5E 2M PATCH LEAD AVAILABLE IN:
RED EM03.008
GREEN EM03.018
YELLOW EM03.023
GREY EM03.003
BLUE EM03.013
CATEGORY 5E 5M PATCH LEAD AVAILABLE IN:
RED EM03.010
GREEN EM03.020
YELLOW EM03.025
GREY EM03.005
BLUE EM03.015
-
12
CATEGORY 5E STRUCTURED CABLING PRODUCTS
Voice Modules
RJ45 - LJU Tailed Telephone Adaptors
Features • Euro style 50 x 25mm
dimension• Krone termination only• Fit standard Emitex
Faceplates
• LJU socket• • Label and protective
cover included
Features • • Choice of secondary, PSTN and PABX• • Individually bagged• High density design
Category 5E RJ45 In-Line ConnectorFeatures • Easy to install • •
EM01.015
EM01.016
EM01.017
EM06.001 6” Tailed RJ45-LJU Socket Secondary Adaptor
EM06.002 6” Tailed RJ45-LJU Socket PABX Adaptor
EM06.003 6” Tailed RJ45-LJU Socket PSTN Adaptor
EM06.006 Category 5E RJ45 to RJ45 In Line Coupler
EM06.012 Category 5E/6 IDC In-Line Connection Box
Sizes available
Sizes available
Sizes available
-
13
CATEGORY 6 STRUCTURED CABLING PRODUCTS
Category 6 Unshielded RJ45 Patch PanelsFeatures • • 250 MHz performance
• Slide labelling system•
• Krone termination only•
• 50 micron gold plated connection
Category 6 Unshielded RJ45 Module
Category 6 Unshielded RJ45 Module - 6C FloorboxFeatures • • • Krone termination only• • • • Label and protective cover
included• 50 micron gold plated
connection
Features • • • Krone termination only• • Overall dimensions 25 x 50mm• • Label and protective cover
included• 50 micron gold plated
connection
EM01.102 1U 24 Way Category 6 Emitex Patch Panel
EM01.104 2U 48 Way Category 6 Emitex Patch Panel
Sizes available
EM01.105 EM01.106
-
14
CATEGORY 6 STRUCTURED CABLING PRODUCTS
Category 6 Patch Leads
Features • • 50 micron gold plated RJ45 Plugs• •
Category 6 RJ45 Plugs
Features • • Release latch• Solid conductor cable only• 50 micron gold plating
EM03.101 Category 6 (0.5m) Patch Lead Grey
EM03.102 Category 6 (1m) Patch Lead Grey
EM03.103 Category 6 (2m) Patch Lead Grey
EM03.104 Category 6 (3m) Patch Lead Grey
EM03.105 Category 6 (5m) Patch Lead Grey
Sizes available
EM06.015
-
15
6C Faceplates & BlanksFeatures • • Flat style only
Faceplates & Blanks (50mm x 25mm)
CATEGORY 6 STRUCTURED CABLING PRODUCTS
Features • • • Choice of blanking plates
EM01.025
EM01.026
EM01.027
EM01.028 Full Width (37 x 22) Blank Plate
EM01.007
EM01.008
EM01.009
EM01.010 Half Width (12.5mm) Blank Plate
EM01.011 Full Width (25mm) Blank Plate
EM01.012 Double Full Width (50mm) Blank Plate
Types available
Types availableBackboxes
EM01.018 1 Gang 32mm Deep Backbox
EM01.019 2 Gang 32mm Deep Backbox
Sizes available
-
16
TOOLS & TESTERS
Punchdown Tool
Features • Inserts connects and Cuts Wire simultaneously• Terminates krone• IDC blocks on all Emitex products• Extraction Lever on Side of Tool• 1 year Warranty
Emitex Punchdown Tools are used to terminate cable into IDC blocks in Patch Panels or Modules.
UTP/FTP & Coax Ratchet Crimping Tool
Features • High quality ratchet tool• Easily interchangeable dies• Reliable and repeatable terminations• Maximum versatility in one single tool• 1 year Warranty
This Emitex Crimping Tool is one of the most versatile products available, it has a wide range of interchangeable die sets which means it is suitable to crimp BNC connectors onto coaxial cables as well as RJ45 plugs onto UTP and FTP cables.
UTP/FTP & RJ11 Ratchet Crimping and Stripping Tool
Features • High quality ratchet tool• Terminates Emitex RJ45 Plugs and RJ11 connectors• Cuts, strips and crimps• Reliable and repeatable terminations• 1 year Warranty
This Ratchet Crimping and Stripping Tool is compatible with the entire UTP and FTP standard connector range but also terminates RJ11 as well as cutting and stripping the cables.
EM05.003
EM05.002
EM05.001
-
17
TOOLS & TESTERS
Continuity Cable Tester
Features • Low cost continuity wire
map tester•
pairs visually• Sequencing LED display
indicates faults
• • Units slide together for protection
against loss and damage•
• Includes carry case• 1 year Warranty
A compact and simple to use Continuity Cable Tester featuring a continuously sequencing LED display that
cabling. The two units slide together to provide protection against loss and damage. This unit does basic
EM05.005
UTP/FTP Cyclops Stripping Tool
Features • Fast removal of outer sheath• Ensures damage free preparation
of cables
• Removes PVC, LSOH & plenum outer sheaths
• 1 year Warranty
The Emitex Cyclops Stripping Tool removes the outer sheath of cables with an
around the cable.
EM05.004
Tone Generator Probe KitThis Emitex product is designed to identify and trace wires or cables within a group without damaging the insulation. It features adjustable volume controls to suit different work environments, a recessed ON/OFF button to prevent accidental battery drain and a plug receptacle for a handset or headset.
It also can indicate line polarity, continuity and voltage, a tone selector switch located inside the test set allows you to choose either a monotone or dual alternating tone.
Features • • Tone trace facility• • Test for correct wiring and power• Volume switch • RJ11 jack allows access to outlets• 1 year Warranty
EM05.006
-
18
TOOLS & TESTERS
This Digital LAN Wire Tester is very easy to operate, allowing the user to test 8 cable runs at once, it helps to prevent and solve cable installation problems. It can widely be used for a number of applications such as cable connection sequence, length, user jumper and cable connection continuity and determine any open circuit, short circuit and cross-talk interference.
Emitex Digital LAN Wire Tester with 8 Remotes
Features •
USB cable & coaxial cable• 8 remotes allow you to
test 8 cables at once• Dynamically tests
cable length• Large LCD with backlight• 1 year Warranty
Data Installer KitIncludes:• Punch Down Tool • Continuity Tester• RJ11/RJ45 Crimping Tool • Cable Stripping Tool• 1 year Warranty
EM05.049
EM05.060
-
19
CATEGORY 5E CABLES
ALL OF OUR CABLES WHERE APPLICABLE ARE TESTED TO FULL CPR SPECIFICATIONS BY BASEC
ancillary products, alongside quality management systems. Operating independently for over 45 years, the BASEC mark is trusted for quality, clarity and impartiality.
declaration of performance documents are available on request.
Category 5E Unshielded Twisted Pair (UTP) Cable - LSZHFeatures • Solid copper core• Category 5E compliant• Power sum compliant• • Box numbering table on front of box•
AVAILABLE IN:
ORANGE EM02.010VIOLET EM02.002
Category 5E Unshielded Twisted Pair (UTP) CableFeatures • Solid copper core• Category 5E compliant• Power sum compliant• Choice of colour• • Box numbering table on front of box•
AVAILABLE IN:
RED EM02.005 YELLOW EM02.007 BLUE EM02.008GREY EM02.001 GREEN EM02.006
Features • Solid copper core• Category 5E compliant• • Box numbering table on front of box• • 100% aluminium foil tape screen
Category 5E Foil Shielded Twisted Pair (FTP) Cable
AVAILABLE IN:
GREY EM02.003
-
20
Features • • 250 MHz performance• • Box numbering table on front of box•
helps to reduce waste•
Category 6 Unshielded Twisted Pair (UTP) Cable - LSZH
AVAILABLE IN:
VIOLET EM02.102
GREY EM02.101
Features • • 250 MHz performance• • Box numbering table on front of box•
helps to reduce waste•
Category 6 Unshielded Twisted Pair (UTP) Cable
AVAILABLE IN:
CATEGORY 5E & 6 CABLES
Category 5E External Grade Cable BlackFeatures • Solid copper core• Category 5E compliant• Power sum compliant• • Box numbering table on front of box•
helps to reduce waste• UV resistant• Duct grade• Weather proof
AVAILABLE IN:
BLACK EM02.004
-
21
CATEGORY 6 & 6A CABLES
Category 6 External Grade (UTP) CableFeatures • • • 250 MHz performance• • Box numbering in front of box• • UV resistant• Duct grade
Category 6A U/FTP Shielded Twisted Pair (LSZH) Cable
Features • • • • •
reduce waste
Category 6 Foil Shielded Twisted Pair (FTP) Cable - LSZH
Features • Solid copper core• • 250 MHz performance• • 100% aluminium foil tape screen•
waste
CATEGORY 6A
ASK FOR DETAILS
AVAILABLE IN:
GREY EM02.103
AVAILABLE IN:
BLACK EM02.104
AVAILABLE IN:
GREY EM02.203
-
22
STRUCTURED CABLING AND UTP - UNSHIELDED TWISTED PAIRMain Computer Room
UTP Outlets Located in Office
STRUCTURED CABLING SCHEMATIC
UTP RJ45 Category 5E Module
UTP - Unshielded twisted pair solid core cable is made up of 4 pairs and can be used to connect a port on the patch panel to a UTP - RJ45 module at the other end.
If you have a 24 port UTP patch panel you can have up to 24 modules in different locations up
from the network cabinet.
PSTN/PABXA voice patch panel is connected to the PTSN
to 24 phones can be connected to a 24 port voice patch panel.
UTP Patch Lead
UTP Outlet
Network I.P Phone
UTP Patch Lead
A patch cable is used to connect comms equipment to a P.C., printer etc.The length of which can vary between 1 and 5 metres and is sold in a variety of different colours for
purposes.
Category 5E Patch Panel
Network Switches
Voice Patch PanelUTP Patch Lead
UTP Patch Lead
Networked Printer & Photocopier
UTP Cat 5E
UTP Patch Lead
-
23
A STRANDED AND SOLID CORE CATEGORY SE UTP CABLE CROSS-SECTION
UTP straight through cable used to connect comms equipment to P.C's.
TIA/EIA 568B Wiring
UTP Patch Cable Cross Section
UTP crossed wiring cable used to connect different types of comms equipment together.
TIA/EIA 568B Crossed Wiring
TIA 568 B
• Hold the RJ45 Plug Latch down with cable entry towards you.
• From Left to Right follow the below wiring
LEGEND: 1 2 3 4 5 6 7 8 White and Orange 1 2 3 4 5 6 7 8 Orange
1 2 3 4 5 6 7 81 2 3 4 5 6 7 8 Blue 1 2 3 4 5 6 7 8 White and Blue 1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8 White and Brown 1 2 3 4 5 6 7 8 Brown
T568B PIN DESIGNATION
Pair 1: White and Blue 5
Blue 4
Pair 2: White and Orange1
Orange 2
Pair 3: White and Green 3
Green 6
Pair 4: White and Brown 7
Brown 8
1 2 3 4 5 6 7 8
Orange
Pair 2
Brown
Pair 4
Blue
Pair 1
Green
Pair 3
1 White and Orange
2 Orange
3 White and Green
4 Blue
5 White and Blue
6 Green
7 White and Brown
8 Brown
TIA/EIA 568 B Wiring
WIRING AN RJ45 PLUG
TECHNICAL GUIDELINES
-
Emitex, Unit 12, Access 18Bristol BS11 8HT
E&EO. Whilst every effort has been made to ensure accuracy, no liability is accepted for the consequences of any errors or omissions in this catalogue
T:E: [email protected]