01 series automatic sliding doors - Plucka · PDF file01 SERIES AUTOMATIC SLIDING DOORS 2 the...
Transcript of 01 series automatic sliding doors - Plucka · PDF file01 SERIES AUTOMATIC SLIDING DOORS 2 the...
Sub
ject
to
chan
ge w
itho
ut n
otic
e· A
MA
02
00
2· 0
1/1
4 ·
01 S
ER
IES
For versatile door solutions.
01 seriesautomatic sliding doors—
01 SERIES AUTOMATIC SLIDING DOORS
2
the ultimate automatic operator—For over four decades
DORMA has been
manufacturing and supplying
the highest quality automatic
door operator throughout
Australia, South East Asia, the
Middle East and New Zealand.
DORMA’s tradition of
superior reliability, longevity,
performance and safety
continues to influence its
product development to supply
durable cost effective operators
with lower life cycle costs.
Using next generation
technology and powered by
DORMA’s 01 series high torque
motor-gearbox offering superior
performance, the 01 Series
motor drive can operate door
weights up to 1000kg.
This impressive automatic
sliding door operator is
extremely versatile to suit the
largest of door applications and
architectural creativity.
The elegant design profile
combined with intelligent door
automation provides the
perfect solution for
sophisticated architectural
concepts and DORMA’s
commitment to quality and
product longevity ensures that
you are investing for the future.
Profile Options Single Slide/Bi-Parting
265mm H x 152mm W
165mm H x 232mm W
Telescopic
266mm H x 245mm W
The DORMA 01 Series is
Australian made specifically
designed for high usage,
certified to 1,000,000
cycles. The motor/gearbox/lock
is supported by a 10 year
warranty when serviced by an
authorised representative in
accordance with AS5007.
The in-built UPS
(Uninterrupted Power Supply) provides full
emergency operation under
loss of mains power to
ensure that safe egress is
maintained, and when
fitted, electric security
locking remains fully
operational for when you
need it most.
The 01 Series EL Secure
electric motor lock has a
2000kg holding force and is
one of a few to be approved for
‘Secure Area Applications’ by
the Australian Government
through the Security Construction Equipment Committee (SCEC).
When longevity, security and
24 hour on call service and
response are paramount, you
can rely on DORMA. This is
why DORMA is the trusted
name and clear market choice.
ComplianceThe DORMA 01 Series fully
complies with the latest
Australian and New Zealand
industry standards and codes
including the National
Construction Code (NCC), and
is compliant with Australian
Standard AS5007 “Powered
doors for pedestrian access
and egress” independently
certified by a NATA accredited
laboratory.
Accessories/Options The DORMA 01 series is
available as a chain or heavy
duty belt drive and can be
interfaced to an extensive
range of door control and
program switches, push
buttons, presence/safety
sensors, P-E safety beams and
a wide choice of signage plates
including Braille.
hospitals & healthcare
financial institutes
shopping centres
law enforcement buildings
hotels & convention centres
government buildings
correctional facilities
airport & transport hubs
01 series automatic sliding doors
3DORMA
hotels & convention centres
government buildings
correctional facilities
airport & transport hubs
engineered for strength—
3 phase 24V high torque motor capable of moving up to 1000 kg
Direct drive gearbox incorporating high tensile steel cut gears
Fully integrated, tamper resistant electric lock enabling the door to be locked in any position
• scec approved• smart lock• partial open lock• emergency lock
• fully enclosed 8:1 gear ratio• chain drive with 1950kg tensile strength• hardened steel gears • sealed for life bearings
• purpose designed• solid construction• maintenance free
Motor Lock When the motor lock function is selected the door will fully close and lock at normal operating speed when all the safety devices are clear. If the door is obstructed while closing it will auto reverse to the fully open position, dwell time out, close and lock.
Smart LockWhen smart lock is selected the door will close and lock at normal speed overriding all safety devices. If the door is obstructed during the closing cycle it will immediately lock in position for a preset time before closing and re-locking.
Emergency LockWhen the emergency lock function is selected the door will close and lock at its maximum operating speed, overriding all the safety devices. If the door is obstructed during the closing cycle it will immediately lock in this position for a preset time before unlocking and fully closing and re-lockinglly closing and re-lock-ing. Partial Open LockWhen the partial open lock function is selected the door will open to a preset distance and lock in this position. A secure transaction can be achieved and when completed the door will fully close and re-lock.
Powered from a standard
240VAC GPO, the 01 Series
utilises a purpose designed 3
Phase 24V AC motor and a fully
enclosed secure motor lock that
is totally resistant to vandalism
and the effects of extreme
weather conditions.
Features and benefits:-
• Doors can be locked in
any position, through the
electric lock engagement.
• High speed emergency close &
lock option.
• Fully enclosed (tamper proof)
lock and digital encoder.
• Partial Open Lock -
a reduced opening
distance that allows secure
transactions.• Constant power at all
times during heavy traffic
flows – performance
guaranteed.
• Engineered to operate
door weights in excess of
300kgs.
• The motor/gearbox/lock are covered by a 10 year warranty when serviced by a DORMA representative in accordance with AS5007.• Endurance tested and NATA accredited to 1,000,000 cycles.
Heavy Duty Purpose Designed and Built Motor and Electric Motor Lock
The DORMA EL Secure electric motor lock is arguably one of the most secure and versatile locks on the market, The 01 series operator is one of only a few to be approved for ‘Secure Area Applications’ by the Australian Government through the Security Construction Equipment Committee (SCEC).
1 2 3
1
2
3
01 SERIES AUTOMATIC SLIDING DOORS
4
01 series operator models—
EL 301
• Powerful 24VAC high torque motor capable of operating a
total door weight capacity of 300kg
• Designed to suit aluminium framed, 12 / 15mm thick
frameless glass, solid core timber or custom type doors
• Robust and reliable chain drive power train with a tensile
strength of up to 1950kg
• UPS feature built in providing up to 300 continuous open /
close cycles during a power failure
• AS5007 NATA accredited
• Tested and certified to 1,000,000 cycles
EL 301 Telescopic - Framed Door
• As per EL 301 features
• Greater flexibility when a wider clear opening is
required but the available space is limited
• Available for use in both bi-parting telescopic (4 door
leaves and single sliding telescopic (2 door leaves in one
direction) applications
• Up to 3 partial open distances available
• Automatic or manual partial open available
EL 301 Secure - Motor Gearbox/ Lock
• SCEC approved for secure area applications
• Fully integrated electronic lock system enclosed in
a solid tamper resistant housing
• Security program functions include: lock, smart lock,
partial open lock and emergency lock
• Up to 48 hours of continuous lock time during a power
failure with an option to extend
• Door leaves can be locked in any position (A/HR’s
parcel transfer)
• BMS interface including open, closed, power, battery,
monitoring
• Customer approach alarms
01 series automatic sliding doors
5DORMA
EL 301 Telescopic - Frameless Glass Door
• As per EL 301 features
• Frameless glass doors provide a clear view and when in the
fully open position door leaves sit flush with the fixed panel
• Greater flexibility when a wider clear opening is
required but the available space is limited
• Available for use in both bi-parting telescopic (4 door
leaves) and single telescopic sliding (2 door leaves in one
direction) applications.
• Automatic or manual partial open available
• Up to 3 partial open distances available
• Mode dependant on partial open function
EL 301 Breakout - Framed Door
• As per EL 301 features (except door weight)
• Operates as a automatic sliding door system under normal
operation
• The emergency breakout/escape function is actioned by
applying outward pressure to the door leaf and/or side
panel which deactivates the automatic function to allow
maximum unimpeded egress
• Sliding door operator with emergency breakout capability
(maximum required egress width)
• Standard door weight 240kg
• AS5007 NATA accredited
EL 301 Breakout - Frameless Glass Door
• As per EL 301 features (except door weight)
• Operates as a automatic sliding door system under normal
operation
• The emergency breakout/escape function is actioned by
applying outward pressure to the door leaf and/or side
panel which deactivates the automatic function to allow
maximum unimpeded egress
• Frameless sliding door operator with emergency breakout
capability (maximum required egress width)
• Standard door weight 200kg
• AS5007 NATA accredited
01 SERIES AUTOMATIC SLIDING DOORS
6
AL 401
• Powerful 3 phase 24 VAC high torque motor
• Door weight capacity 400kg
• Stainless steel track system
• Designed to suit aluminium framed and 12mm, 15mm, 19mm thick frameless glass, solid core timber or custom type doors
• AS5007 NATA accredited
• Tested and certified to 1,000,000 cycles
• Solid 12:1 ratio gearbox with steel cut gears
AL 501
• Powerful 3 phase 24 VAC high torque motor, coupled with 12:1 ratio gearbox
• Door weight capacity up to 500kg
• Solid aluminium J-track system
• Designed to suit aluminium framed 12mm, 15mm, 19mm, 25mm thick frameless glass, solid core timber or custom type doors
• AS5007 NATA accredited
• Tested and certified to 1,000,000 cycles
• Solid 12:1 ratio gearbox with steel cut gears
AL 1001
• Powerful 3 phase 24 VAC high torque motor, coupled with 12:1 ratio gearbox
• Door weight capacity 1000kg
• Solid steel track system ensures smooth operation and long term reliability
• To suit door widths up to 3000mm
• Solid 12:1 ratio gearbox with steel cut gears
• Applications include hospital lead lined doors, large wall
dividers and industrial doors
01 series operator models—
01 series automatic sliding doors
7DORMA
01 series performance table—Door Parameters EL 301 AL 401 AL 501 AL 1001
Single panel sliding door
– Maximum Door width
– Maximum Door weight
3000mm
300kg
3000mm
400kg
3000mm
500kg
3000mm
1000kg
Double leaf sliding door
– Maximum Door width
– Maximum Door weight
1500mm*
150kg
2000mm*
200kg
2000mm*
250kg
2000mm
500kg
Technical Data
Height (Cowl) 240mm 240mm 240mm 420mm
Depth 152mm 152mm 152mm 152mm
Track Type Aluminium Stainless Steel Solid Aluminium Solid Steel
Gearbox
Purpose designed fully enclosed with steel cut gears 2 2 2 2
Drive Train
High Torque Motor 24V 3 Phase 2 2 2 2
Chain 2 2 2 2
Belt
Opening speed (Fully adjustable) 10 – 50cm/sec 10 – 50cm/sec 10 – 30cm/sec 10 – 30cm/sec
Closing speed (Fully adjustable) 10 – 40cm/sec 10 – 40cm/sec 10 – 30cm/sec 10 – 30cm/sec
Hold open time (Independent for Lock and Auto
mode)
0 – 60 sec 0 – 60 sec 0 – 60 sec 0 – 60 sec
Power Supply 240 V, 50/60Hz 240 V, 50/60Hz 240 V, 50/60Hz 240 V, 50/60Hz
Power Consumption 175W 175W 175W 175W
Ambient Temperature -15°C to 50°C -15°C to 50°C -15°C to 50°C -15°C to 50°C
Class of protection (IP Rating) IP20 IP20 IP20 IP20
Control Module
Function Modes
– Off/Lock
– Exit
– Automatic
– Open
2222
2222
2222
2222
Electronic Mode Pad
Security Interface (Mode Control & Activation)
After Hours Exit (Night bank) 2 2 2 2
Self Learn Function 2 2 2 2
Automatic reverse on obstruction 2 2 2 2
Photo electric cells (Safety beams) 2 2 2 2
Failsafe Opening 2 2 2 2
Continuous operation under power failure (UPS) 2 2 2 2
12 VDC output 2 2 2 2
Door Management System (DMS)
Customer Approach Alarms (Lock/PE/Auto)
Locking
Electric Motor lock (Fully enclosed/tamper resistant)
Lock Functions - Smart/Emergency/Pharmacy
Door Lock in any position
Standard 2 Optional
*larger door sizes upon request
01 SERIES AUTOMATIC SLIDING DOORS
8
general specification teXt —
The Automatic Door OperatorThe Automatic single slide/bi-parting door operator is to be a 240-volt fully electric DORMA 301/401/501 SERIES. Fully housed in extruded aluminium (height 265mm x width 152mm), with at least 85% Australian made content and fully comply with the relevant Australian Standards for Automatic Door operators.A NATA test and verification of compliance certificate to AS5007 section 4.6 is to be supplied prior to tendering.
The equipment will incorporate the following:A 3 phase 24 volt motor that is unable to be burnt out; a programmable logic control with current sensing and durable solid state switching of the motor; chain drive with average tensile strength of 1950kg and a 12.7mm pitch; self-lubricating gearbox with steel cut gears (not nylon or cast) for increased durability with no intermediate belts or pulleys; an anodised aluminium replaceable tracking system; and a carriage assembly supported by glass fiber reinforced nylon track wheels with fully raced and sealed ball bearings.
The operator must have positive electric braking to close the doors smoothly; fully adjustable speed control with independent settings for open, close and braking; automatic re-closing circuitry to ensure doors re-close if partially opened; intermediate selectable opening widths or climate control facility.
The operator is to incorporate a failsafe device to open doors fully on power failure or on fire signal in accordance with the NCC section D2.19 and relevant Australian Standards; monitoring warning signal to indicate when the battery power is low; automatic reversing if obstructed during closing sequence with fully adjustable sensitivity settings; automatic stop and retry if obstructed during opening sequence at a predetermined programmable time and speed; dual sets of jamb fitting high gain (up to 15m) flush mounted safety beams (PE cells) that are resistant to sunlight.
ActuationThe operator is to be actuated by two DORMA microwave movement sensors as standard equipment; the sensors must be resistant against reflected sun light and have focusable area detection settings to reduce unnecessary actuations.
The operator is to be covered by a two (2) years parts and twelve (12) months labour warranty from date of invoice.
Optional Features
Belt Drive15mm belt with curvilinear tooth design precisely formed and accurately spaced to ensure smooth engagement with pulley grooves.
Motor LockThe operator is to have a failsafe electric motor lock, compliant with the NCC section D2.19 and D2.21, which locks the doors via the drive train regardless of the door position. It is to incorporate a rechargeable battery reserve to ensure the doors remain locked for up to 48 hours under mains power failure with an option to extend.
Advanced Security Interface BoardProvides operational data output signals for building security system, i.e. open, closed, locked (refer to page 11)
Mode Pad The operator is to be fitted with a DORMA one touch operation electronic mode pad with back lit LCD screen. The mode pad is to have an input jack for the operator programming device and integrated diagnostic feedback function that provides information on door function status and servicing requirements.
01 series automatic sliding doors
9DORMA
operator specification teXt—The automatic framed/frameless/SCD
door operator to suit a single/double/four
panel sliding door is to be a 240v fully
electric DORMA EL 301 Secure Series.
Fully housed in extruded aluminium, the
operator is to include a tamper proof
fully enclosed electric lock capable of
locking the door leaves in any position.
The operator must include a monitored
battery back up system with audible
alarm and be able to provide up to 48
hours of lock function during a power
failure. The operator is to comply with
the Australian Standard AS5007.
EL 301 Single/Bi-parting/Telescopic Automatic Door Operator:
EL 301 Breakout - Framed Door the Automatic Door Operator:
The automatic single / bi-parting, door
operator is to be a 240v fully electric
DORMA EL 301 Framed Breakout
Series, fully housed in extruded
aluminium (265 mm H x 152 mm W).
The operator must be capable of
operating a total door weight up to
240kg and in emergency be able to
opened fully including the
sidelights by applying an outward
pressure. It is to include a monitored
battery back up system with audible
alarm that is able to operate the door up
to 300 cycles during a power failure. The
operator is to comply with the Australian
Standard AS5007 and the Building Code
of Australia.
The automatic single / bi-parting, door
operator is to be a 240v fully electric
DORMA EL 301 Frameless Breakout
Series, fully housed in extruded
aluminium (265 mm H x 152 mm W).
The operator must be capable of
operating a total door weight up to 200
kg and in emergency be able to opened
fully including the sidelights by applying
an outward pressure. It is to include a
monitored battery back up system with
audible alarm that is able to operate the
door up to 300 cycles during a power
failure. The operator is to comply with
the Australian Standard AS5007 and the
Building Code of Australia.
EL 301 Breakout - Frameless Glass Door Automatic Door Operator:
AL 501 Automatic Door Operator:
AL 401 Automatic Door Operator:
AL 1001 Automatic Door Operator:
The automatic single / bi-parting door
operator is to be a 240v fully electric
DORMA AL 401 Series, fully housed in
extruded aluminium (265mmH x
152mmW) including a stainless steel
track system. The operator must be
capable of operating a total door weight
up to 400 kg and include a monitored
battery back up system with audible
alarm that is able to operate the door up
to 300 cycles during a power failure. The
operator is to comply with the Australian
Standard AS5007 and the Building Code
of Australia.
The automatic single / bi-parting door
operator is to be a 240v fully electric
DORMA AL 501 Series, fully housed in
extruded aluminium (265mmH x
152mmW) including a solid aluminium
track system. The operator must be
capable of operating a total door weight
up to 500 kg and include a monitored
battery back up system with audible
alarm that is able to operate the door up
to 100 cycles during a power failure. The
operator is to comply with the Australian
Standard AS5007 and the Building Code
of Australia.
The automatic single / bi-parting door
operator is to be a 240v fully electric
DORMA AL 1001 Series, fully housed in
extruded aluminium (420mm H x
152mm W) including a solid steel track
system. The operator must be capable of
operating a total door weight up to 1000
kg and include a monitored battery back
up system with audible alarm that is able
to operate the door up to 100 cycles
during a power failure. The operator is to
comply with the Australian Standard
AS5007 and the Building Code of
Australia.
01 SERIES AUTOMATIC SLIDING DOORS
10
Smart Lock
options—Motion Sensor Pushbutton
Motion/Presence Sensor
Presence Sensor Remote Mode Switch
Push to open plate Privacy Door System
Magic Switch
- Adjustable field detection W4500 x D2000mm- Flexible mounting options- Rain cover option - Operating voltage 12/24 V AC/DC
- Dual motion/presence sensor- Presence safety curtain 2mt wide x 0.20mt deep- Motion field 4m wide x 2m deep
- Presence sensor- Presence safety curtain 2mt wide x 0.20mt deep
- Palm activated rocker button- Stainless Steel finish- Dimension H80mm x W80mm
- Stylish design- Wireless- Lock/Open/Auto/Hold function- 50m operating distance
Part No. A86002000
Part No. A86712400
Part No. A86302100
Part No. D19143001170 - Finish SSS
Part No. A10120240
- Suitable for parent room door application- Compliant to National Construction Codes (NCC)- Durable and robust design including braille and raised lettering
- Touchless switch- Wall or surface mount- Suitable for hospitals, clean room and food preparation
- Suitable for disabled toilet door applications- Compliant to National Construction Codes (NCC)- Durable and robust design including braille and raised lettering - Bell output, duress and staff over-ride functionPart No. A10109035
Part No. B12010039
Part No. A10109025
Mode Pad Switch LCD Displayed symbol
- Security pin-coded- Simple one-touch mode selection- Diagnostic feedback- Customer warning alarms- Partial opening settings- Pharmacy lock control
Part No. A10110016B
SK Switches Series Key Switches
- Solid construction with stainless steel finish- Security concealed fixing points and suitable for most master key systems- SK2 Spring return switch- SK4 Four position switch
Part No. B9009036
Part No. D19143201170 - H/CAP
01 series automatic sliding doors
11DORMA
building management—
service and maintenance—When you choose DORMA, you are supported by a nationwide
network of accredited and fully trained, specialist automatic door
technicians and agents, 24 hours a day, 7 days a week.
Our specialised service covers DORMA’s comprehensive range of
door operators, door closers, industrial doors and movable walls
with our expertise extending to all models.
When you call DORMA Service you will speak to someone who
knows the products and who can offer expert advice.
Public safety and security are our paramount concern and this is
reflected in our prompt response times - making DORMA the
unrivalled industry leader in service support.
DORMA Service – at work in your locality.
With our comprehensive maintenance and repair service, DORMA ensures the functional integrity, safety and security of door systems for extended longevity. DORMA Service 24/7 Australia Ph: 1800 675 411New Zealand Ph: 0800 436 762
Advanced Security Interface Board: • Flexible interface between door operator and security/BMS
• Outputs include: locked, closed, 240V fail, battery condition,
people count etc.
• Inputs include: security interface to open, lock, emergency lock,
partial open lock, safety stop etc.
Door Management System:• System integration via building LAN (local area network)
• Up to 10 door operators can be controlled and monitored
• Remote control operation from a stand alone PC
• Provides real time dianostic feedback
• Mode control via built in time clock
Sub
ject
to
chan
ge w
itho
ut n
otic
e· A
MA
02
00
2· 0
1/1
4 ·
01 S
ER
IES
DORMA AustraliaHead Office46-52 Abbott RoadHAllAMVictoria 3803Phone 1800 675 411 [email protected]
DORMA NZ limitedHead OfficeBuilding P61-69 Patiki RoadAVONDAlEAuckland 1026Phone 0800 436 [email protected]
HD 200—
Automatic Sliding Door Operator
AM
A010
06,
08
/14,
HD
20
0*S
ubje
ct t
o ch
ange
with
out
notic
e
With the innovative DORMA HD 200 system you are investing in the future, a system that offers the perfect solution for all applications, door types and design challenges, offering whisper quite operation and convenience within a compact design profile (155 mm). Exceptionally Smart & PowerfulDORMA HD 200 heavy duty Power Drive offers dynamic acceleration and deceleration, and has opened up a new dimension with its modular control system - providing maximum power in the all-in-one modular mini drive unit (MDU). Now there is no longer a requirement to replace components when you wish to expand the functional characteristics of your system as ‘Docking’ will be the future in upgrading your technology, and now you ‘Simply plug in – and upgrade’. The elegant design profile combined with intelligent door automation provides the perfect solution for sophisticated architectural concepts and designs and DORMA’s commitment to quality and product longevity ensures that you are investing for the future.
Exceptionally SafeQuality, reliability and durability are central to the brand DORMA, which is why the DORMA HD 200 has been endurance tested to 1 million cycles and fully complies to all relevant Australian & New Zealand NCC building codes and standards. Moreover it has been independently tested by a NATA accredited facility to Australian standard AS5007 section 4.6(Exova Warrington Fire Australia,Certificate No. 30384400.1).
When choosing DORMA, you have the security and peace of mind derived from our many decades of experience in the automatics business – a history that sets DORMA apart as the clear market leader in motor drive and door control system technology. The in-built UPS (Uninterrupted Power Supply) provides full emergency operation under loss of mains power to ensure that safe egress is maintained, and when fitted, electric security locking remains fully operational for when you need it most. Exceptionally Simple InstallationThe DORMA HD 200 is user friendly to install utilising the same easy fit heavy duty track wheels and installation setup providing greater uniformity across the
DORMA automatic sliding door range. AccessoriesDORMA has an extensive range of door control and program switches, push buttons, presence & safety sensors, P-E safety beams and a wide choice of signage plates including Braille.
HD 200 Features and BenefitsDORMA Power Drive: Dynamic driving phase control for particularly powerful and responsive operation and door control.
Endurance tested to 1 million cycles to ensure reliability, durability and peace of mind.
Uninterrupted Power Supply (UPS) maintaining full operation under loss or interruption of mains power
Modular, flexible system incorporating ‘docking’ to quickly upgrade the system
Elegant slim design profile (155 mm H) Exceptionally simple & easy to install using DORMA easy fit system Option for HD 200 telescopic door entry to maximise clear opening width (refer to page 3 DWG)
EXCEPTIONALLY SMART, SAFE AND SLIM DESIGNWITH DRIVE POWER TO SPARE—
HD 200 SLIDING DOOR OPERATOR
DORMA2
THE PROFESSIONAL OPERATOR FOR INDIVIDUAL DOOR DESIGN—
Door variants with HD 200
DORMA 3
1.
12mm Thick Glass Door Hole Detail - Refer to drawing No. 2 above
HD 200 GLASS PREPARATION OPTIONS (≤1200mm width shown)
ALUMINIUMFRAMED DOOR
FRAMELESSGLASS DOOR
2.
FRAMELESS GLASSWITH DORMA CDS 43S TOP RAIL
3.
212
266
21
3
780
117
225
2154.
TELESCOPIC ALUMINIUM DOOR FRAMED
DORMA CDS 43S Top Rail Glass Detail - Refer to drawing No. 3 above
225
215
130
80
3
26621
2
32
21
5.
FRAMELESS GLASSWITH DORMA CDS 43S TOP RAIL
DORMA
HD 200 SLIDING DOOR OPERATOR
14
13
11
10
12
9
Data parameters HD 200
Single-panel sliding door - Clear passage width LW- Door panel weight, max.
900-1800mm 1x200kg
Double-panel sliding door- Clear passage width LW- Door panel weight, max.
1200-2800mm 2x120kg
Telescopic 2x120kg
Techincal data of operator
Height - profile 155mm
Installation depth 215mm
Opening and closing force, max. 150N
●
Opening speed (incremental setting)
10 - 70 cm/s
Closing speed(incremental setting)
10 - 50 cm/s
Hold-open time 0 - 180 sec.
Supply voltage, frequency 230V, 50/60 Hz
Power consumption 250W
Class of protection IP 20
Compliant with EU Low voltage directive and EMC Directive
●
Manufactured to ISO 9001:2000 ●● Yes
Technical data of operator
Modular design ●
Microprocessor-controlled function programs – Lock – Automatic – Permanent Open – Half Open – Exit Only – Night-/Bank Function
● ● ●●●●●
Connections for – Fire alarm interface (FIP) – Security interface / Card Reader (BMS)
● ●
Adjustment of all basic parameters via integrated display and pushbuttons
● ●
24V DC output for external accessory ●
Read-out error memory with error codes ●
Electromechanical lock ●
Rechargeable battery pack for emergency operations (UPS) ●
Functioned module (FM)-optional extra
Door status - Open/Closed ●
Main and secondary closing edge protection ●
Panic closing function ●
Bell contact ●
DORMA4
4x60kg
HD 200 SLIDING DOOR OPERATOR
DORMA
1
HD 200 Bi parting operator shown
MiniDriveUnit
56 4 3 2
At the core of the HD 200 is the prefabricated MiniDriveUnit.It has been independently tested by a NATA accredited facilityto Australian standard AS5007 section 4.6(Exova Warrington Fire Australia,Certificate No. 30384400.1).
Components
1 MiniDriveUnit 2 Power supply unit 3 Motor 4 Encoder 5 Basic module (BM) 6 Function module (FM) 7 Track rail and mounting profile
8 Rechargeable battery pack 9 Door hanger bar10 Easy fit adjustable door hanger bracket11 Belt connection 12 End pulley13 Belt tensioning device14 End stop
DORMA
200 SLIDING DOOR OPERATOR
5
87
DORMA
HD 200 SLIDING DOOR OPERATOR
SYSTEM ACCESSORIES—
Mode Pad
PK Series Security Key Switches Wireless Remote Switch
P2 Pushbutton
Program switchWhen combining the system with a program switch out of the DORMA accessory range, the automatic door system even meets individual requirements and offers easy handling.
These program switches are available in various designs have been conceived for all kinds of demands. Furthermore they offer various options, from a mechanical to a full-elec tronic version.
Drive unitControl unit
3 x
1.5
mm
2
2 x
0.8
mm
2
100
m
10 x
0.8
mm
2
100
m
4 x
0.8
mm
2
100
m
2 x
0.8
mm
2
100
m
10 A
Emergency pushbutton,close to door
Inside: Pushbutton
Outside: Key switch, card reader
ModePad/Key Switch230/240 V AC
50/60 Hz
Connections
- Solid construction prestige keyswitch - Security concealed fixing points. Suitable for most master key systems- PK2 - Spring return switch- PK4 - Four position switch
- Mushroom head pushbutton- Situable for after hours egress and emergency exit- Compliant with AS1428- Diameter 45mm- Plate dimension 115mm x 40mm
- 5 Operating Modes- Emergency Exit Button- Customer Pin Code - Lock/Auto/Open/Exit/Half
- Stylish four button switch - Wireless, for ease of installation- Lock/Open/Auto/Hold functions- Operating distance up to 50m- Dimensions 115mm x 75mm
PK4 Part No. A81009004 PK2 Part No. A81009002 Part No. A10120240
Part No. NHD4016 Part No. B90009006
240V 10A GPO located RHSInside View
HD 200 SLIDING DOOR OPERATOR
DORMA6
Motion Sensor Pushbutton
Motion/Presence Sensor Pushbutton with handicapped symbol
Presence Sensor Keypad 0-9
Push to open plate Privacy Door System
Touchless Switch Wireless Key Chain Remote
- Adjustable field detection W4500 x D2000mm- Flexible mounting options- Rain cover option - Operating voltage 12/24 V AC/DC
- Dual motion/presence sensor- Presence safety curtain 2mt wide x 0.20mt deep- Motion field 4m wide x 2m deep
- Presence sensor- Presence safety curtain 2mt wide x 0.20mt deep
- Palm activated rocker button- Stainless Steel finish- Dimension H80mm x W80mm- IP44 weather rating
- Palm activated rocker button with handicapped symbol- Stainless Steel finish- Dimension H80mm x W80mm x D9mm- IP44 weather rating
- Keypad for pin number access- 0-9 Keypad- Dimensions H125mm x W76mm x D15mm
Part No. A86002000 (silver)
Part No. A86712400 (silver)
Part No. A86302100 (silver)
Part No. D19143001170
Part No. D19143001170
Part No. B12004020
- Suitable for parent room door application- Compliant to National Construction Codes (NCC)- Durable and robust design including braille and raised lettering
- Wall or surface mount- Suitable for hospitals, clean room and food preparation- Dimensions H85mm x W85mm
- Suitable for disabled toilet door applications- Compliant to National Construction Codes (NCC)- Durable and robust design including braille and raised lettering - Bell output, duress and staff over-ride function
- Key chain remote control ease of door activation- Shock proof design - Operating distance up to 100m- Activation functions
Part No. A10109035
Part No. B12010039 Part No. D29301001
DORMA
HD 200 SLIDING DOOR OPERATOR
7
AM
A010
06,
08
/14,
HD
20
0*S
ubje
ct t
o ch
ange
with
out
notic
e
DORMA AustraliaHead Office46-52 Abbott RoadHAllAM
c a e
f a d a cd a c a
DORMA GmbH + Co. KGDORMA Platz 158256 ENNEPETALGERMANYPhone +49 2333 793-0Fax +49 2333 793-4950www.dorma.com
Layo
ut S
. 6 –
DO
RM
A CI
-201
2 •
Engl
isch
• S
tand
11.
09.2
012
DORMA_U4-Adressen_CI-2012.indd 6 07.06.13 10:54
CS 80 MAGNEO—
WN
0
54
0
81
5
15
32
, 0
1/1
2, C
S8
0 M
AG
NE
O, D
, x. XX. xx/1
2
Subject to change w
ithout notice
Automatic Sliding Door Operator
2
CS 80 MAGNEO
Schiebetürautomatik
CS 80 MAGNEO
Automatic sliding door operator
Outstanding user convenience and unique driving behaviourexcel the automatic sliding door operator CS 80 MAGNEO. Based on their solenoid technology, DORMA realised an easy-to-handle operator system for all kinds of single-panel interior doors. DORMA's elegant Contur design is characteris-tic for the CS 80 MAGNEO. Thanks to its slender and linear construction in conjunction with two freely selectable design versions, CS 80 MAGNEO perfectly matches the overall architecture of the building to harmonise with further integrated DORMA solutions - both in the private and the public sector.
Superior designIn order to meet the high aesthetic demands of interior design, CS 80 MAGNEO is available in two different and freely selectable surface finishes. In its standard version in anodised aluminium, the magnetic sliding door operator ensures visual unity with other products out of DORMA's Automatic range. As an alternative, users may choose a stainless steel version in matt finish. This stainless steel surface finish perfectly matches DORMA Glass applications to create visual unity and a harmoni-ous overall look.
Suddenly anything is possibleThanks to the flexibility of this new system, the CS 80 MAGNEO opens up various fields of application – both in the private and the commercial sector. No matter if installed as interior door, as access door of a walk-in cupboard or as presti- gious entrance door to an office or practice, the CS 80 MAGNEO is extremely versatile as it is suitable for in-wall or on-wall mounting and may be realised as left- or right-handed version. For professionals and com-petent laymen, this auto-matic sliding door operator is straightforward to install and easy to operate, making it a preferred application, es-pecially as also existing door systems may be upgraded with the aid of the automatic CS 80 MAGNEO operator.
Safe – CS 80 MAGNEO In Low-Energy-Mode, extra-sensitive driving charac-teristics respond immedi-ately to any obstacle, thereby ensuring excellent protection as a rule. Additional safety sensors may not be required as the sliding door operator, if realised as Low-Energy application in accordance with DIN 18650 (German Industrial Standard), ANSI (American Standard) and BSI (British Standard), may even be operated without sensors. When Full-Energy-Mode is activated at the operator, the CS 80 MAG-NEO benefits from seamless integration in the DORMA system. In this case, the CS 80 MAGNEO must be equipped with optional safety sensors from the DORMA Automatic range of accessories.
Functions No matter if you would like to open the door in a full-automatic way via mo-tion detector, manually, via pushbutton or if you would like to adjust the door so that it is permanently open, the CS 80 MAGNEO already provides a large range of standard functions. It may be activated via pushbutton, radar motion detector, radio remote control, Push&Go, manually and adjusted to Permanent Open Function or Full-Energy-Mode (in Full-Energy Mode additional safety sensors are required).
Mounting In many cases, mounting the CS 80 MAGNEO does not require any specialist knowledge. Comprehensive mounting and operating instructions mean that the mounting be performed by the glass, metal and timber worker or the competent layman.
CS 80 MAGNEO – An unrivalled automatic sliding door operator.
3
Magnetic technology is silent. MAGNEO will give the proof.
A technology is suitable for everyday business if you hardly notice it: thanks to its almost noiseless and reliable function.
The CS 80 MAGNEO is driven by the magnetic and thus contactless shear wave of a linear DC motor – a movement that perfectly
matches the movement of a sliding door. The functional principle of the CS 80 MAGNEO is simple: Its silent operating
behaviour makes the system especially suitable for areas where a low noise level is required: Everywhere.
The functional principle of MAGNEO
Moving direction of electromagnetical wave
shearing force
coil
magnet magnet magnet magnet
coil coil coil coil coil stator
runner
4
+
+
++
+
CS 80 MAGNEO
Schiebetürautomatik
CS 80 MAGNEO
Automatic sliding door operator
Door kit glass clamping railDoor kit for wooden door panel
Cover and fixing kit for wooden door panels and glass clamping rails
The respective door kits contain all components that are required to mount the CS 80 MAGNEO operator onto the door panel for the prevailing way of mounting.
CS 80 MAGNEO is a modular system consisting of door kits, cover and fixings kits, the CS 80 MAGNEO operator and accessories. The system allows virtually any door to be configured as an automatic sliding door. The overview right illustrates which system components are required.
You will require an additional cover and fixing set if you want to mount the CS 80 MAGNEO operator on the wall.
The CS 80 MAGNEO operator is the basis for any application. It is available in three lengths in order to cover different door widths.
Door kit MANET
Cover and fixing kit for MANET
Wooden door/frame door (on-wall)
Glass door/glass clamping rail (on-wall)
Glass door/ MANET single-point fixings (on-wall)
CS 80 MAGNEO – Our modular system appears to be that simple. It is!
CS 80 MAGNEO operator incl. set for in-wall mounting
You may choose the CS 80 MAGNEO in two different surface finishes:
(E6/CO): to match automatic DORMA access systems in different designs
meet other designs out of the DORMA Glass product range
5
+++
+
+
Door kit MANETDoor kit MANET
Glass fixing system
Door kit glass clamping railDoor kit for wooden door panel
Glass door/ MANET single-point fixings*2
(in-wall)
Glass door/MANET single-point fixings*1
(on glass wall)
Glass door/glass clamping rail (in-wall)
Wooden door/frame door (in-wall)
*1 Planning and mounting by a specialist firm only *2 This application does not comply with European Union standards. There is a risk of injury in the panel-suspension area.
Ways of mounting Passage widths
The CS 80 MAGNEO operator, the fixing kit and cover kit as well as the glass clamping rail kit are available in three different lengths.
Available door panel versions
(solid-leaf construction)
from 20 to 80 kgThe door panel must be ordered separately.
Activation of opening/closing cycle
motion detector
6
CS 80 MAGNEO
Schiebetürautomatik
CS 80 MAGNEO
Automatic sliding door operator
Self-service provides high comfort.
The CS 80 MAGNEO is easy to handle. This automatic sliding door operator offers all important standard functions and various special functions for your convenience.
User comfort that will open doors for you: either in a full automatic way via motion detector, pushbutton (either with cable or wireless), radio remote control or with the
aid of our smooth Push&Go Function. No matter how you open the door – all functions are freely selectable: the hold-open time, Permanent Open and automatic closing.
beautiful!
7
Plenty of accessories for those who want even more
Push&GoThe door opens as soon as the door is slightly pushed in opening direction by hand and closes automatically on expiry of the individually adjustable hold-open time.
“SoftMotion“ safetyThe system is delivered in Low-Energy-Mode as standard so that the door will stop and reverse automatically on the slightest contact.
Pushbutton The CS 80 MAGNEO is activated via pushbutton. The sliding door will close automatically as soon as the user has passed the door system.
Program switch You may comfortably switch between the different operation modes (Automatic, Permanent Open and manual operation) with the aid of the internal program switch or the wall-moun-ted EPS-S3 program switch.
Radio remote control A CS 80 MAGNEO operator with a BRC radio remote system may be opened and closed with
Motion detectorAn ArtMotion motion detector is suitable to open the CS 80 MAGNEO in a full-automatic way.
Manual accessAlthough the CS 80 MAGNEO is a full-automatic operator, it may effortlessly be opened and closed manually in the event of a power failure.
Series functions as standard.
8
CS 80 MAGNEO
Schiebetürautomatik
CS 80 MAGNEO
Automatic sliding door operator
up to 1,038 mm
up to 1,145 mmup to 1,270 mm
LV3 LV2 LV1
2,340 mm2,090 mm
1,840 mm
up to 190 mm
Door panel width B
Passage width DBAB AB
30 mm30 mm
min. 250 mm
The sliding door on the drawing opens to the left side, thus the power supply is connected on the right side of the door (mains connection 3 x 1.5 mm²). The power supply of door systems opening to the right thus has to be realised on the left side of the operator.
Place requirement for operator including cover + end caps
A folding rule is enough to plan the system.
The door panel projection is freely selectable. It may however not exceed 65 mm and is calculated with the aid of the passage width DB and the door panel width B: (Door width B – DB) / 2 = AB
Operator length and driving path
Available lengths LV 1-3
AB = door panel projection
Please have a look at our CS 80 MAGNEO
planning aid leaflet for further assistance
during the planning your door system. If you
are interested in this leaflet please contact
your DORMA specialist dealer or visit us on
the internet www.dorma-magneo.com.
Passage width DB
Driving path F opening to the left
AB
The length of the CS 80 MAGNEO operator depends on the length of the door’s driving path (F) – which describes the distance the door has to cover for its opening or closing cycle. The respective formula is blindingly easy: Passage width DB + Door panel projection AB = Driving path F
We offer the CS 80 MAGNEO in three different lengths: LV1 for driving paths F of up to 875 mm, LV2 for driving paths F of up to 1,000 mm,LV3 for driving paths F of up to 1,125 mm.
You want to determine the required space to the nearest millimetre? Please visit us on the internet at www.dorma-magneo.com and have a look at the table “PLACE REQUIREMENT CS 80 MAGNEO”.
9
Reach your target with the proper dimensions.
Is there a door frame or baseboard? If so, how big is the projection of the frame/baseboard with regard to the surface of the wall (AW) at its biggest point? In case the AW-dimension (projec-tion) is bigger than 3 mm, you will have to shim the CS 80 MAGNEO operator.
DORMA offers a special shim plate for this purpose. In case the AW-dimension (projection) is bigger than 15 mm, the operator additi-onally has to be shimmed by others.
Shim plate
Door frame
AW-dimension
The opening direction of the sliding door determines where the power supply (mains connection) is connected at the CS 80 MAGNEO. The cable that comes out of the wall should at least be 250 mm long. See drawing at bottom of page 8.
Power supply DH & DBAU = Bottom edge of operator
AO = Upper edge of operator
and the passage width DB have to be determined when planning an automatic CS 80 MAGNEO sliding door system.
AU describes the distance between the bottom edge of the CS 80 MAGNEO operator and the passage. You may select the dimension according to your requirements and will require it when plan-ning your CS 80 MAGNEO as an on-wall mounted version.
AO describes the distance between the upper edge of the operator and the passage. You may select the dimension according to your requirements and will require it when planning your CS 80 MAGNEO as an in-wall mounted version.
On-wall mounting In-wall mounting
CS 80 MAGNEO systems with door frame or baseboard projection (AW-dimension)
10
780 – 1,190 mm
Glass thickness 8-12 mm
max
. 3,0
00 m
m
max
. 3,0
00 m
m
21
21
6 50
100
R5l 8
30
C
=
=780 – 1,190 mm
21
21
6
max. 8
max. 40
Door
pan
el h
eigh
t = D
H +
Au
– 3
DHAu
75
min. 5
6
25 – 30or
max. 8
Hei
ght o
f gla
ss p
ane
= DH
+ A
u –
39
DHAu
75
min. 5
6H
eigh
t of g
lass
pan
e =
DH +
Au
– 12
DHAu
62
min. 5
max. 8
CS 80 MAGNEO
Schiebetürautomatik
CS 80 MAGNEO
Automatic sliding door operator
That’s all you need: Required installation dimensions.
When planning an automatic CS 80 MAGNEO door system, you may for example start with the door panel in order to create a smooth look with regard to the passage or to use an existing door panel.
It is often reasonable to concentrate the planning on the fixing points of the operator as the fixing options provided by others are limited.
Wooden door/frame door (on-wall)
Glass door/glass clamping rail (on-wall)
Glass door/ MANET single-point fixings (on-wall)
Please have a look at our CS 80 MAGNEO planning
aid leaflet for further assistance during the planning
your door system. If you are interested in this leaflet
please contact your DORMA specialist dealer or visit
us on the internet www.dorma-magneo.com.
Glaziers and joiners should keep these dimensions in mind.
The door panel is not a system component of the CS 80 MAGNEO modular system, you may place your order with a glazier or joiner.
Door panel width is freely selectable between 780 mm and 1,190 mm. The door panel projection (AB) must however not exceed 65 mm. (See page 8)
Door panel height is freely selectable (max. 3,000 mm) and calculated with the aid of the mounting height of the operator.
Glass door panels have to be made of safety glass and all glass edges have to be rounded off.
Door panel weight may amount to between 20 and 80 kg.
point fixings must be provided with drill holes and recesses before the system is mounted. The required C-dimension
LV 1: C = 575 mm LV 2: C = 700 mm LV 3: C = 825 mm
How to order the door panel: Preparation of wooden door panel Glass door panel with glass clamping rail
11
max
. 3,0
00 m
m
780 – 1,190 mm
Glass thickness 8-12 mm
90°
l 3
2
l 2
6
5563
= =C
21
21
6Do
or p
anel
hei
ght =
DH
+ A
o – 7
5
DHAo
58 69
55
max. 8 max. 8
max. 40
6H
eigh
t of g
lass
pan
e =
DH +
Ao –
111
DHAo
58
105
55
max. 8 max. 8
DHAo
58
55
max. 8
6H
eigh
t of g
lass
pan
e =
DH +
Ao –
71
65max. 8
6H
eigh
t of g
lass
pan
e =
DH +
Au
– 12
62
min. 5
DHAu
max. 8
reco
mm
ende
d: 1
,050
mm
min. 70 mm
90°
l 5
3l
51
closing edge
Drill hole for recessed
door grip
*1 The system may only be planned and mounted by a properly qualified person. Please also have a look at the CS 80 MAGNEO leaflet for systems with glass fixings.
*2 This application does not comply with European Union standards. There is a risk of injury in the panel-suspension area.
Glass door/ MANET single-point fixings*2
(in-wall)
Glass door/MANET single-point fixings*1
(on glass wall)
Glass door/glass clamping rail (in-wall)
Wooden door/frame door (in-wall)
We would recommend covering the door panel connection at the CS 80 MAGNEO operator with profiles so that you will be able to access the operator easily even after the wall has been closed.
Furthermore you may use a special door frame by company BOS. Please contact the manufacturer for further details:
BOS Phone number: +49 2572 203-0 Internet: www.BestOfSteel.de
Hints regarding in-wall mountingPreparation of MANET glass door panel
Preparation of optional recessed door grip
12
CS 80 MAGNEO
Schiebetürautomatik
CS 80 MAGNEO
Automatic sliding door operator
A. Door kits 84000071 8400007-3 -4 -5 84000077 84000077 84000071 8400007-3 -4 -5 84000077
84000078 84000078 84000078
B. Cover and fixing kitE6/C0 8400005-1 -2 -3 8400005-1 -2 -3 8400006-1 -2 -3 8400006-1 -2 -3
Matt stainless steel design 8400005-4 -5 -6 8400005-4 -5 -6 8400006-4 -5 -6 8400006-4 -5 -6
Optional shim plate, if AW (projection) = 3 to 15 mm 8402012-4 -5 -6 8402012-4 -5 -6 8402012-4 -5 -6 8402000-6 -7
C. CS 80 MAGNEO operator 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3
USA-version with UL-approval 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6
Which system components do you require?
The CS 80 MAGNEO operator, the fixing kit and cover kit as well as the door kit with glass clamping rail are available in three different lengths. The required length is determined via the driving path. LV1 for driving paths F of up to 875 mm,LV2 for driving paths F of up to 1,000 mm,LV3 for driving paths F of up to 1,125 mm.
Driving path F = passage width DB + door panel projection AB
Driving path: on-wall mountingDetermining the required length version LV1 to LV3
The CS 80 MAGNEO is a modular system. Combine your system components based on your installation requirements: CS 80 MAGNEO operator plus door kit and in case of on-wall mounting: plus cover kit and fixing kit. For some system components you must select the correct length
nents and kits are required for each way of mounting. Please note the article numbers in the ordering guide below.
DB =
AB =
F =
Wooden door/frame door (on-wall)
Glass door/glass clamping rail (on-wall)
Glass door/ MANET single-point fixings (on-wall)
Please have a look at our CS 80 MAGNEO
planning aid leaflet for further assistance
during the planning your door system. If you
are interested in this leaflet please contact
your DORMA specialist dealer or visit us on
the internet www.dorma-magneo.com.
13
AW =
A. Door kits 84000071 8400007-3 -4 -5 84000077 84000077 84000071 8400007-3 -4 -5 84000077
84000078 84000078 84000078
B. Cover and fixing kitE6/C0 8400005-1 -2 -3 8400005-1 -2 -3 8400006-1 -2 -3 8400006-1 -2 -3
Matt stainless steel design 8400005-4 -5 -6 8400005-4 -5 -6 8400006-4 -5 -6 8400006-4 -5 -6
Optional shim plate, if AW (projection) = 3 to 15 mm 8402012-4 -5 -6 8402012-4 -5 -6 8402012-4 -5 -6 8402000-6 -7
C. CS 80 MAGNEO operator 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3 8401000-1 -2 -3
USA-version with UL-approval 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6 8401000-4 -5 -6
CS 80 MAGNEO: Risk for the facility operator and risk assessmentThe risk of crushing, shearing, hitting and drawing-in may not be excluded at automatic doors. When the system is delivered (in Low-Energy-Mode), the CS 80 MAGNEO meets the requirements of DIN 18650. By complying with the provisions, such as reduced driving speeds and contact forces, the system generally provides a high safety standard so that sensors are not required as a rule. At the discretion of the operator or installer and
depending on the spatial conditions and the persons using the door, it may be advisable to use safety sensors even when the system is operated in Low-Energy-Mode, for in-stance if being used by children or older persons. For this purpose, a risk assessment must be carried out by a specialist firm when the door system is being planned and commissioned. It is at the operator’s discretion whether or not a safety device is actually installed. In Full-Energy-Mode the use of additional safety sensors is obligatory.
Glass door/ MANET single-point fixings*2
(in-wall)
Glass door/MANET single-point fixings*1
(on glass wall)
Glass door/glass clamping rail (in-wall)
Wooden door/frame door (in-wall)
*1 The system may only be planned and mounted by a properly qualified person. Please also have a look at the CS 80 MAGNEO leaflet for systems with glass fixings.
*2 This application does not comply with European Union standards. There is a risk of injury in the panel-suspension area.
Determining the maximum AW-dimension (projection)Driving path: in-wall mounting
1. What kind of door would you like to install?
A. Which door kit do you need?
B. Would you like to mount the CS 80 MAGNEO onto the wall? If so, you will require a cover and fixing kit. Which one?
Is the passage area equipped with a door frame and/or are there any baseboards? Is the AW-dimension bigger than 3 mm? If so, you will need a shim plate.
2. What kind of power supply would you prefer? Direct power supply (flush-mounted) ......................................................................................Standard equipment
3. How would you like to open and close the door? Automatic activation (opening) as soon as the door panel is pushed by hand (Push&Go) .............Standard equipment Easy switch set (radio switch and receiver) ................................................................................. White 89000040 ..................................... Silver-coloured 89000041 ........................................... Anthracite 89000042 Additional radio switch ............................................................................... White 89000046 ..................................... Silver-coloured 89000047 ........................................... Anthracite 89000048 Recessed door grip for door panel (recommended with Push&Go Function) ............................................. 84020100 Automatic activation (opening) via pushbutton (flush-mounted version, white) ................................... 19144701170 Automatic activation (opening) via ArtMotion motion detector ................................................. Black 16614701170 ................................Silver-coloured 16614702170 .............................................White 16614703170 Additional sensor fixing set (always order 1 set for ArtMotion motion detectors) ....................................... 84020030 Automatic opening via radio control .....................................................................................Empfänger 29302002 .......................................... 29301001 ................................... Funk-Wandtaster 29301002 Additional set of radio switches (always order 1 set for radio systems) .................................................... 84020081 4. How would you like to adjust the function programs (Off, Automatic, Permanent Open)? Adjustment of function programs via internal program switch (located at end cap) ............................. 16610601175 Adjustment of function programs via external program switch (EPS-S3, wall-mounted) ...................... 16605501150 Adjustment of “Permanent Open Function“ via double-click on activator (not possible with motion detectors such as ArtMotion) ...........................................................Standard equipment 5. Do you require safety or presence sensors to safeguard the closing edges? The limited driving speeds and the low contact force provide a high safety standard when the system is operated in the . standard “Low-Energy-Mode” (system status of CS 80 MAGNEO on delivery). A risk assessment must be carried out during planning and commissioning to determine whether the use of additional sensors is required. The installation of additional sensors is optional and lies in the discretion of the facility operator. If the CS 80 MAGNEO is operated in extended “Full-Energy-Mode”, the closing edges have to be additionally protected. The respective safety equipment has to be installed by a specialist for automatic door systems.
..........................................................16576001170 IRIS ON (closing edge protection) ..................................................................................................16588801170 Additional sensor fixing set (order one set per sensor) ...........................................................................84020030 6. With locking device ........................................................................................................................... 84020130
For queries and orders relating to CS 80 MAGNEO system components, please contact:
Ordering guide. Almost ready: Your CS 80 MAGNEO.
Please enter the article numbers from the adjacent table.
Four steps to create your door system. Then everything will work automatically.
1. Measuring
3. Select system components
4. Order system components and door panels
2. Planning
Measure the passage and the required dimensions on site. Please consider the CS 80 MAGNEO planning aid leaflet to determine all important dimensions. If you are interested in this leaflet, please contact your DORMA specialist dealer or visit us on the internet: www.dorma-magneo.com.
The CS 80 MAGNEO is a modular system. The table on pages 12-13 indicates the required system components for all ways of mounting. Please enter the article numbers on the form on the back of this paper.
Place an order for the desired CS 80 MAGNEO components with your authorised DORMA dealer. Please contact the glazier or joiner of you choice to order the suitable door panel. The technical specifications for the door panel on pages 10 and 11 will help you during the placement of your order.
CS 80 MAGNEO. The information on pages 8 to 11 in this brochure will help you.
16
CS 80 MAGNEO
Schiebetürautomatik
CS 80 MAGNEO
Automatic sliding door operator
Technical specifications
Operator length without cover with cover 1,750 mm2,000 mm2,250 mm
1,840 mm2,090 mm2,340 mm
Operator heightWith MANET single-point fixings With glass clamping rail With wooden door panel
62 mm75 mm75 mm
Overall depthOn-wall mounting (without shim plate) In-wall mounting (only operator profile)
60 mm50 mm
Operator weight
8.6 kg9.4 kg
10.2 kg
Speed 0.2 – 0.6 m/sThe speed is calculated with the aid of the driving path and the door panel weight. During the commissioning, the system will adjust auto- matically in accordance with the prevailing standards and regulations.
Power supply
Fuse protection, by others 10 A
Power consumptionStand-by-mode Automatic Function
3.7 Wmax. 60 W
Class of protection IP 20
Temperature range 0 – 40 °C
Required operating conditionsOnly suitable for dry environments non-condensing
Operating noise max. 55 db (A)Measured at test setup. The noise level depends on the door and the prevailing substructure.
Low-Energy-Mode
Full-Energy-Mode with safety sensor
Compliant with DIN 18650, ANSI, BSI
Manufactured to ISO 9001
Connectable accessory
Pushbutton, radio remote control and radio switch
Motion detector
External program switches
Safety sensors for main and secondary closing edge
= yes = optional
DORMA system components of the modular system Art. No.
CS 80 MAGNEO operator incl. set for in-wall mounting LV1 84010001 LV2 84010002 LV3 84010003USA-version with UL-approvalLV1 84010004 LV2 84010005 LV3 84010006
Cover and fixings kit for wooden door panels and glass clamping rail E6/COLV1 84000051 LV2 84000052 LV3 84000053 Matt stainless steel designLV1 84000054 LV2 84000055 LV3 84000056
Cover and fixings kit for MANET E6/COLV1 84000061 LV2 84000062 LV3 84000063Matt stainless steel designLV1 84000064 LV2 84000065 LV3 84000066
Door kit for wooden door panel incl. floor guides 84000071
MANET door kit incl. floor guides
E6/CO 84000078
Matt stainless steel design 84000077
Door kit for glass clamping rail incl. floor guides E6/C0 LV1 84000073 LV2 84000074 LV3 84000075Aluminium profile, mill finish LV3 84000076
Shim plateLV1 84020124LV2 84020125LV3 84020126
Recessed door grip for wooden or glass doors
E6/CO 84020101
Matt stainless steel design 84020102
17
Profiles in stock lengths 6,250 mm Art. No.
Mounting profile for glass-fixing system
Mill-finishE6/C0
Matt stainless steel design
34002701120 34002702120
34002703120
Fixing profile for glass-fixing system 34002801120
Cover profilefor glass-fixing system
Mill-finishE6/C0
Matt stainless steel design
34002901120 34002902120
34002903120
Internal cover 75 mm
Mill-finishE6/C0
Matt stainless steel design
34003003120 34003002120
34003004120
Internal cover 62 mm
Mill-finishE6/C0
Matt stainless steel design
34003103120 34003102120
34003104120
Distance profile 34003401120
Operator profile 34002502120
Accessories: Operator and door panel Art. No.
Set for in-wall mounting 84020002
Set for on-wall mounting LV1 84020003LV2 84020004LV3 84020005
Set for on-wall mounting (for glass walls)
E6/C0Matt stainless steel
design
84020006
84020007
Mains cable for8402004084020041840200428402004384020044840200458402004684020047
End capsMill-finish
E6/C0Matt stainless steel design
Mill-finishE6/C0
Matt stainless steel design
840200708402007184020072840200738402007484020075
Cover profile set for wall connection 84020090
Guide rail for wooden door panels 1,125 mm 84020112
Floor guide for in-wall mounting For wooden door panelsFor glass door panels
840201238073600099
CS 80 MAGNEO locking device 84020130
Floor guide on metal sheet (frame) 92212001
External floor guide rail (glass) 33438001150
Pushbuttons and program switches Art. No.
Pushbutton, flush-mounted design, whiteSystem 55 19144701170
Easy switch set (radio switch and receiver)White 89000040Silver-coloured 89000041Anthracite 89000042Additional radio switchWhite 89000046Silver-coloured 89000047Anthracite 89000048
Program switch EPS-S3 16605501150Internal program switch (no picture) 16610601175Internal program switch USA 16610651175
Comfort switch with BRC radio technology Art. No.
BRC-R receiver 29302002
Additional set of radio switches 84020081(always required for radio systems, no picture)
BRC-H hand-held transmitter 29301001
BRC-W large-surface pushbutton 29301002
Motion detectors and sensors Art. No.
ArtMotion radar motion detectorWhite 16614703170Silver-coloured 16614702170Black 16614701170
ACTIV8 ONE ONMotion detector and closing edge protection 16576001170
IRIS ONClosing edge protection 16588801170
Additional sensor fixing set 84020030(order one set per sensor, no picture)
DORMA GmbH + Co. KGDORMA Platz 158256 ENNEPETALGERMANYPhone +49 2333 793-0Fax +49 2333 793-4950www.dorma.com
Layo
ut S
. 6 –
DO
RM
A CI
-201
2 •
Engl
isch
• S
tand
11.
09.2
012
DORMA_U4-Adressen_CI-2012.indd 6 07.06.13 10:54
DORMA Australia Head Office46-52 Abbott Road,Hallam, Victoria 3803Telephone (03) 8795 0270Facsimile (03) 8795 0696Toll Free 1800 675 411
DORMA NZ LimitedHead OfficeBuilding P61-69 Patiki RoadAvondale
c a d e e e ac e
WN
05
4 0
81
51
53
2,
01
/12
, C
S8
0 M
AG
NE
O,
D,
x. X
X. x
x/1
2
Sub
ject
to
chan
ge w
itho
ut n
otic
e
PRIVACYDOOR SYSTEM—Providing solutions for disabled access
The PDS complies with the following: . NCC Access for people with a disability . NCC Braille and tactile signs . AS5007-2007 Power doors for pedestrian access and egress
Barrier-free solutions for people with disabilities (PWD)
The DORMA Privacy Door System
(PDS) provides unhindered
automated access for people with
d a e e ca e fi ed to either swing or sliding door
operators depending on the
required design applications.
The PDS offers the following features:
. Simple to use (amenities and parent rooms) . Flexible design (sliding or swing) . Robust and reliable operation . Braille and tactile signs . Surface mount or cavity slide . Electric lock with door closed function . Built in or key switch staff override function for use in emergency . BMS interface capability . Duress alarm I/O . Bell output . MLAK- Key accessible using Master Locksmiths Access Key (option)
O a a Head Office
46-52 Abbott Road, Hallam, Victoria 3803
T 1800 675 411
[email protected] www.dorma.com.au
Plate FeaturesThe internal/external mounted
PDS plates are designed
using a polycarbonate
membrane that is vandal
resistant, UV stabilised and
a affi c a ed
PDS operation: . External Plate (standard)When vacant green indicator illuminated, press the outside Push to Open button to activate and open the door . External Plate MLAK (option) when vacant green indicator illuminated, insert master locksmiths accessible key and turn to activate and open the door . Once inside press the Push to Lock button to secure the door (outside button and key activation is switched off and Occupied red indicator is now illuminated) . To exit simply press the Push to Open button
Internal PlateIncluded on the plate are
solid push buttons and
stainless steel housed red/
green indicators providing a
wide viewing angle and
IP67 rating.
(265mm H x 230mm W)
External Plate (Standard)
Internal Plate
External Plate (MLAK Option)
External PlateIncluded on the plate is a solid push
button and stainless steel housed red/
green indicators providing a wide
viewing angle and IP67 rating.
(205mm H x 230mm W)
External Plate MLAK (option)The MLAK external plate option features the DORMA Prestige Key switch complete with an Australian oval cylinder keyed to the MLAK (Master Locksmiths Access Key). The MLAK-PDS plate option is an innovative system that enables people with disabilities to gain 24/7 access to a network of public facilities that utilise this system. People with a disability are able to purchase a MLAK master key from a member of the Master Locksmiths Association which will automatically open facilities such as accessible toilets and other facilities which are fitted with the DORMA MLAK-PDS plate. Included on the plate is the Prestige Key switch keyed to the MLAK and stainless steel housed red/ green indicators providing a wide viewing angle and IP67 rating.(205mm H x 230mm W)
DORMA PRIVACY DOOR SYSTEM
AMA02005· 07/14· PDS
O e ea a d Head Office
Building P, 61-69 Patiki Road, Avondale, Auckland 1026
T 0800 436 762