004-PA-16 Technosheet MCP3 - Verder Liquids€¦ · MCP3 Industrial pump series The Packo pumps of...
2
Packo MCP3 Industrial pump series The Packo pumps of the MCP3 series are used in almost all industries such as vegetable industry, breweries, water treatment and textile industry as well as in e.g. biogas, biodiesel and bioethanol applications. These robust pumps have stainless steel 316L cast pump casings and closed or channel investment cast impellers, constructed in 316L or duplex materials. Thanks to its solid construction and electro polished design these pumps are the reliable component for your production process. Application areas They are often used as process pump for contaminated water as well as for CIP cleaning systems, filtration of wine, mash, beer, whey and blanching of vegetables. Typical liquids: mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc. Your benefits High pump efficiency resulting in lower energy consumption Low NPSH values: less risk on cavitation Electropolished Easy construction and easy maintenance: Less downtime Standard components Easy to install 3 mechanical seal diameters for the entire range Robust construction Max. flow rate 1250 m 3 /h Max. differential head 70 m Max. liquid viscosity 500 cP Max. temperature 140°C Impeller type Closed (with back vanes and balancing holes) and channel impellers Max. free passage 27 mm for closed impellers & 41 mm for channel impellers Max. motor power 132 kW Max. speed 3000 / 3600 rpm Available frequency 50 / 60 Hz Connections Industrial flanges acc. to EN 1092-1/01 and ANSI Materials wetted parts Stainless steel 316L or similar Available materials o-ring EPDM, FKM, FEP-FKM, FFKM, Silicone Mechanical seal configuration Single, quench, double Surface finish Industrial finish: welds are not hand polished. Final surface treatment: electropolished Certificates & Legislation 1935/2004 EC, FDA, ATEX, EU N° 547/2012 Technical specifications
Transcript of 004-PA-16 Technosheet MCP3 - Verder Liquids€¦ · MCP3 Industrial pump series The Packo pumps of...
Packo MCP3 Industrial pump series
The Packo pumps of the MCP3 series are used in almost all industries such as
vegetable industry, breweries, water treatment and textile industry as well as in
e.g. biogas, biodiesel and bioethanol applications. These robust pumps have
stainless steel 316L cast pump casings and closed or channel investment cast
impellers, constructed in 316L or duplex materials. Thanks to its solid construction
and electro polished design these pumps are the reliable component for your
production process.
Application areas
They are often used as process pump for contaminated water as well as for CIP
cleaning systems, filtration of wine, mash, beer, whey and blanching of vegetables.
Typical liquids: mash, wort, process and contaminated water, biodiesel, bioethanol,
alcohols, CIP, biogas, etc.
Your benefits
High pump efficiency resulting in lower energy consumption
Low NPSH values: less risk on cavitation
Electropolished
Easy construction and easy maintenance: Less downtime
Standard components
Easy to install
3 mechanical seal diameters for the entire range
Robust construction
Max. flow rate 1250 m3/h
Max. differential head 70 m
Max. liquid viscosity 500 cP
Max. temperature 140°C
Impeller type Closed (with back vanes and balancing holes) and channel impellers
Max. free passage 27 mm for closed impellers & 41 mm for channel impellers
Max. motor power 132 kW
Max. speed 3000 / 3600 rpm
Available frequency 50 / 60 Hz
Connections Industrial flanges acc. to EN 1092-1/01 and ANSI
Materials wetted parts Stainless steel 316L or similar
Available materials o-ring EPDM, FKM, FEP-FKM, FFKM, Silicone
Mechanical seal configuration Single, quench, double
Surface finish Industrial finish: welds are not hand polished. Final surface treatment: electropolished
Certificates & Legislation 1935/2004 EC, FDA, ATEX, EU N° 547/2012
Technical specifications
Find your local supplier at www.verder-liquids.comFor construction, installation and fl oor mounting drawings
please contact your local authorised Verder® distributor.
MC
P3_
Ind
ustr
ial_
pum
p_s
erie
s_Te
chno
shee
t_re
v01_
2016
_(eu
)
Packo MCP3 Industrial pump series
Performance curves
Electropolished Mechanical polishing 240 grit Glass bead blasted
Specifi cations
Solid design thanks to thick pressed casings and investment cast impellers (1)
Standardized mechanical seals to EN 12756
FDA approved bellow mechanical seals (2) or balanced O-ring seals
Mechanical seal diameters (43 - 70 - 110 mm)
Use of standardized components
Electropolished design (for wetted & non-wetted parts);
easy to clean and increased corrosion resistance
1
1
2
125 -2002900 rpm
90
80
70
60
50
40
30
20
10
0
Hea
d (m
)
0 200 400 600 800 1000 1200 1400Flow (m3/h)
200 - 3151450 rpm
125 - 2501450 rpm1450 rpm
125 -200125 -200125 -200125 -2002900 rpm
100 - 200 2900 rpm
80 - 1602900 rpm
100 - 160 1450 rpm
150 - 3151450 rpm
150 - 2501450 rpm 250 - 315
980 rpm
