How to Upgrade the software We can upgrade the DVD player Software using DISC

as well as USB by following procedure. Copy the received file on PC DESKTOP. If the file is in compressed form then extract it to BIN

type. If the file is already BIN type then follow the next

step. Rename the BIN type file as MTK (extension should

be .bin). Copy it to USB or write on to DISC. Now take care that while upgrading, the Power of

DVD Player should not be OFF/Interrupted.

1

DISC WRITING - MTK Use the Nero start smart to make the upgrading disc. Open the Nero start smart Click on make data CD Add the MTK.BIN file by clicking on Add button. Now right click on added file in Nero window, the file

will get added for writing. Click on Next Button. In Next window wite DISC Name to MEDIATEK Now click on Burn option. Let it be burn completely. The software DISC is Ready Now.

2

UPGRADING - MTK

How to upgrade through Upgrading Disc/ USB Through Disc Insert the Upgrading disc in to DVD player . It will display the message to “Press Play key to start upgrading” Press the Play or Enter Key through remote. Tray will come out automatically. Now take the upgrading Disc out. Do not switch off or press any key during this condition. With in 10-15 seconds upgradation will be complete & disc will go

inside automatically. It is done. Through USB Copy the MTK.BIN file directly to USB Plug the USB to DVD Player & follow the same procedure as mentioned above.Note: Through USB upgradation take the USB out after completion of

Upgrading 3