· • Overload Protection electronics prevent motor ... Hard and soft Dynapad® PSA platen pads...
Transcript of · • Overload Protection electronics prevent motor ... Hard and soft Dynapad® PSA platen pads...
www.grovesindustrial.com • 713.675.47471
WE'VE GOT YOU COVERED
www.grovesindustrial.com 713.675.4747
www.grovesindustrial.com • 713.675.47471
Electromagnetic Drill Press BaseFixed Position• 120 Volt AC only, 12.5 amp max. rating• 9 inch drill travel• For use on any flat ferrous material, 1/2 inch and thicker.
Length Width Height Item #
11 in 4-1/4 in 15 in MIL 4202
14 in Chop Saw15 Amps, 5.5 HP, 120V• QUICK-CHANGE™ blade change system increases pro-
ductivity by providing the user the ability to change wheels without a wrench
• Exclusive QUICK-FENCE™ is a 45-degree, adjustable fence designed for fast and accurate angle cuts without using a wrench
• QUICK-LOCK vise allows for fast clamping on different size materials to increase productivity
• Ergonomically designed “D” handle provides a more com-fortable hand position, reducing fatigue and increasing productivity
• Keyless Blade Change System
Arbor Size Cutting Capacity No Load RPM Item #
1 in 5 in 4,000 DEW D28715
Magnetic Drill Press2 in, 2-Speed, 10 Amps, 120V• Overload Protection electronics prevent motor damage
and excess accessory wear• Quick Release feed handles provide tool free change of
handles to either side of the tool• Magnetic coolant bottle can be placed on either side of tool
or on a work surface to allow for a variety of tool orienta-tions
• Motor height adjustment gives greater range of accessory compatibility
Chuck Size Drill Travel No Load RPM Item #
1/2 in 4-3/8 in 300/450 DEW DWE1622K
High Performance Angle Grinder4-1/2 in, 13 Amps, 2.3 HP, 120V, Paddle Switch• E-Clutch(TM) shuts the grinder off when a wheel pinch
or wheel stall occurs, extending the life of the gears and motor
• Vibration reducing two position side handle provides user comfort and reduces user felt vibration
• Auto-off brushes shut the tool down when the brushes need replacing to avoid tool damage
• Keyless adjustable guard provides tool free guard adjust-ments increasing productivity
• Lock-on: No
No Load RPM Spindle Item #
11,000 5/8-11 DEW D28115N
High Power Angle Grinder4-1/2 or 5 in, 13 Amps, 2.3 HP, 120V, Trigger Switch• Quick-Change™ Wheel Release allows tool free wheel
removal• Dual abrasion protection provides increased motor protec-
tion from damaging dust and debris ingestion• One-piece brush arm prevents brush hang-up due to dust
ingestion• Vibration-reducing side handle increases comfort for
extended use applications• Keyless adjustable guard
No Load RPM Spindle Item #
9,000 5/8-11 DEW D28115
Angle Grinder7 or 9 in, 15 Amps, 5.3 HP, 120V• Rotating rear handle provides improved ergonomics in
cutting and grinding applications• Keyless adjustable guard allows for guard adjustments to
be made without tools• Low profile gearcase allows for work in tight areas• Lock-on: Yes
No Load RPM Spindle Item #
6,000 5/8-11 DEW D28499X
Straight Grinder6 in, 15 Amps, 120V• Coated spindle housing for cool gripping surface• Hinged face plate for quick easy wheel replacement
No Load RPM Spindle Item #
5,500 5/8 in - 11 MIL 5243
Straight Grinder3 in, 11 Amps, 120V• Coated spindle housing for cool gripping surface• Hinged face plate for quick easy wheel replacement
No Load RPM Spindle Item #
14,500 3/8 in - 24 MIL 5211
Power Tools
www.grovesindustrial.com • 713.675.47472
Straight-Line Die Grinder1/4” NPT, 0.5 HP, Front Exhaust• Durable ball-bearing construction improves balance,
reduces vibration, and ensures a longer life.• Strong aluminum housing withstands tough operating
conditions.• Easy-to-use, integral safety-lock throttle lever prevents
accidental start up.• Tool comes with 1/4” and 6 mm collets and two wrenches.
AirConsumption
AirPressure Collet Size RPM Item #
24 CFM 90 psi 1/4 in 18,000 DYN 51301
Right Angle GrinderType 27, 1.3 HP, Rotational Exhaust• 1.3 hp Depressed Center Wheel Grinder is ideal for fast
weld and stock removal, heavy deburring, plus rust and scale removal.
• Includes 25215 Wheel Guard, 25262 Backup Flange and 53696 Locking Flange.
• Vibration Dampening Side Handle included
Hose ID Wheel Diameter RPM Item #
3/8 in 5 in 12,000 DYN 52633
Die Grinder1/4” NPT, 3 HP• Straight shaft die grinder designed to be used with var-
ious 3M products such as 3M(TM) Cartridge Rolls and 3M(TM) Even Run Bands
• Handles heavyweight applications such as stock removal• Precision-balanced steel motor reduces vibration for great-
er efficiency and operator comfort• 3M(TM) Gripping Material on the body reduces vibration
and enables operator to maintain a secure grip with less effort
Collet Size Length RPM Item #
1/4 in 3 in 18,000 3M 051141-28628
Heavy Duty Angle Grinder4” Dia., 1/4” NPT, Front Exhaust• Powerful 0.6hp (450W) high performance motor for fast,
efficient grinding in tight quarters• Aluminum alloy housing is rugged yet lightweight for
maximum operator comfort• Spiral bevel gearing in angle head provides extended life
and smooth low vibration• CFM @ Full Load: 24
Spindle Size RPM Item #
3/8-25 12,000 CP 854
• Compact and powerful 0.7HP motor (0.5 Kw)• Lightweight and rugged advanced alloy housing
Thread Size RPM Item #
3/8-24 11,500 CLECO 216GLF115A-W3T4
Pneumatic Angle GrinderType 27, 4-1/2”, 3/8” NPT, 1 HP• High torque grinders feature repositionable guards for
improved visibility, steel gear heads for add durability and superior noise reduction
• Powerful without excessive weight for improved operator comfort
Thread Size RPM Item #
3/8-24 12,000 3M 051141-28414
Dynafile® Air Belt Sander4-1/2 x 7/8”, 36 Grit• Includes 11218 Contact Arm• Replaces tedious hand filing and sanding• Motor adjusts easily for the most comfortable throttle lever
position• Lightweight, thermal-insulated composite housing reduces
vibration and cold air transmission to operator• Grind off contact wheel or platen pad: Finish and polish
using slack of belt• Hard and soft Dynapad® PSA platen pads mount on con-
tact arms for heavy grinding or contour polishing• Sound Level: 84 dB(A)
Needle Scaler
• Adjustable bayonet-type needle housing lock allows adjustment without special tools
• Rubber-faced throttle valve means positive sealing• Precision heat-treated needles for maximum perfor-
mance
Air Inlet Hose ID RPM Item #
1/4 in NPT 1/4 in 13,300 DYN 14000
®
®
®
Right Angle GrinderType1, 4” Dia,1/4” NPT, 0.6 HP
Piston Stroke Bore Hose Size CFM Item #
1-1/16 in 15/16 in 5/16 in 13 TXP TX-182NS
www.grovesindustrial.com • 713.675.47473
• Durably etched, hard-chrome-plated blades are rust resistant and made to last
• 12” square has precision-machined working surfaces for improved accuracy
• Built-in scriber comes in handy for surface marking• Easy-to-read vial• High-visibility yellow, die-cast handle with brass hard-
ware for durability
Blade Length Item #
12 in STN 46-123
Hand Tools
Outside Micrometers0 to 25 mm range• Heat-insulated frame, tapered (on the anvil side) for hard-
to-reach places• A ratchet stop for a constant measuring force• Supplied in a fitted plastic case
Graduation Item #
0 - 1” MTI 102-301
Length Shank Size Point Style Blade Width Item #
7 in .373 in Angle 3/4 in AJAX 392
7 in .373 in Angle 1-3/8 in AJAX 394
7 in .373 in Wide 2 in AJAX 390
Outside MicrometersSteel • Starrett satin chrome finish – no glare – resists rust• Advanced sleeve design with staggered lines and distinct
figures for precise and easy readability• Balanced frame and thimble design ensure easy handling• Gracefully designed tapered frame for use in narrow slots
and tight places• Quick and easy adjustment• Micro-lapped measuring faces
Graduation Range Item #
.001 in 0-1 in STA 436.1P1
.001 in 0-2 in STA 436.1RL-2
Chisel • Cleco Style Shank
Combination Square12 in Blade Length, Die Casr
Power Tools
Right Angle Die Grinder1/4” NPT, Rear Exhaust• Right-angle design fits into tight spots• Lightweight composite housing protects tool from cold air
and provides operator comfort• Durable ball bearing construction improves balance, reduces
vibration and ensures longer life• Built-in lubricating wick increases angle gear life• Safety-lock throttle is easy to use and prevents accidental
startup
Hose ID Collet Size RPM Horse Power Item #
3/8 in 1/4 in 20,000 .33 I-R 302B
Right Angle Die Grinder1/4” NPT, Front Exhaust• Durable ball-bearing construction improves balance, reduces
vibration, and ensures a longer life.• Strong aluminum housing withstands tough operating condi-
tions.• Easy-to-use, integral safety-lock throttle lever prevents acci-
dental start up.• Tool comes with 1/4” and 6 mm collets and two wrenches.
Collet Size RPM Horse Power Item #
1/4 in 21,000 .25 I-R 310B
Single Acting Hydraulic Cylinder • The Golden Ring absorbs eccentric loading without galling
cylinder parts• Collar threads, plunger threads and base mounting holes
enable easy fixturing (on most models)• Cylinder design for use in all positions• Heavy-duty return springs• CR-400 coupler and dust cap included on all models• Plunger wiper reduces contamination, extending cylinder
life
Size Stroke Length Effective AreaOil
Capacity Item #
10 tons 1 in 2.24 in 2.24 in ENP RC-101
5 tons 1 in 0.99 in 0.99 in ENP RC-51
10 tons 1-1/2 in 2.24 in 3.35 in ENP RCS-101
Hydraulic Lightweight Hand Pump1 in Piston Stroke• Durable glass-filled nylon reservoir and nylon encapsulated
aluminum pump base for maximum corrosion resistance• Lower handle effort to minimize operator fatigue• Handle lock and lightweight construction for easy carrying• Large oil capacities to power a wide range of cylinders or tools• Non-conductive fiberglass handle for operator safety• Internal pressure relief valve for overload protection.
No. of Stages
Max Press.1st Stage
Max Press. 2nd Stage
Max Handle Effort
NPT Port Item #
2 200 psi 10,000 psi 93 lb 3/8 in ENP P-392
1 -- 10,000 psi 85 lb 3/8 in ENP P-391
®
®
www.grovesindustrial.com • 713.675.47474
Heavy Duty V-Head Jack Stand • Quick action lock washer for fast height positioning• Patented Fall Guard feature allows 1” safety zone around
lock washer• Set screw can lock jack head to stand for transportation -
no loose pieces• Jack independently load tested for quality assurance
Overall Height Load Capacity Item #
28 to 49 in 2,500 lb SUM 780375
Lever Chain Hoist3/4 Ton • Weston-style load brake• Dual-stage reduction gearing• Hardened alloy steel, nickel-plated grade 100 load chain• Load-tested Meet ANSI/ASME B30.21 standards• Spring-loaded, free-wheeling device allows adjustment and
safeguards against accidental free wheeling• Includes safety latch hooks- top and bottom hooks rotate
360°, and open slowly without fracturing under heavy loads
Lift Hook Opening Chain Length Item #
10 ft 7/8 in 11 ft HAR LB008-10
Tuff-Edge® Flat Eye & Eye Web Slings Type 3• Resists UV Sunlight, Grease and Most Acids• Standards OSHA and ASME B30.9
Size Eye Length Vertical Hitch Capacity Item #
1” x 4’ 8-1/2 in 1,600 lb LIF EE1801TFX4
1” x 6’ 8-1/2 in 1,600 lb LIF EE1801TFX6
1” x 8’ 8-1/2 in 1,600 lb LIF EE1801TFX8
2”x 4’ 10 in 3,200 lb LIF EE1802TFX4
2” x 6’ 10 in 3,200 lb LIF EE1802TFX6
2” x 8’ 10 in 3,200 lb LIF EE1802TFX8
2” x 10’ 10 in 3,200 lb LIF EE1802TFX10
Proof Coil Chain3/4 in, Grade 30, 200 ft per Dr• Excellent general-purpose chain of standard commercial
quality• Frequently used for fabricating tow chains, binding or tie
down chains• Order unit is “Feet”
Finish Material Working Load Limit Item #
Self Colored Low Carbon Steel 2.650 lbs C-C 0120600
Lifting / Material Handling
HSS-Co Annular Cutter
• Steel quality: special high capacity speed steel• Ground section: high performance toothing with pre and
post cutter.
Cut Dia. Depth of Cut Item #
7/16 in 1 in ALF 1914011025-G
1/2 in 1 in ALF 1914013025
1/2 in 2 in ALF 1914013050-G
13/16 in 1 in ALF 1914021025-G
13/16 in 2 in ALF 1914021050-G
Spade Drill InsertTiN • High speed steel (HSS) provides good wear resistance a can be used in general purpose applications on both ferrous and nonferrous materials. •Titanium nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and harness resistance allows the tool to run at higher speeds than uncoated tools.• Cobalt is harder than high speed steel and provides better weresistance. It is comonly used on high tensile alloys
Dia Series Code Material Item #
2 in D High Speed Steel ALL 1024T-0200
9/16 in 0 Cobalt ALL 150T-0018
®
ALFRA
Cutting Tools
Management of all indirectmaterials
The best vending device foryour application
Con�gured for what is usedin your plant
Our Technical Services Can Make YouMore Productive and Pro�table
www.grovesindustrial.com • 713.675.47475
Gemini® Depressed Center Wheel24 Grit, Type 27, Aluminum Oxide• Designed for use on right-angle grinders, aggressively
remove material by grinding on the periphery.• Notching wheels cut on the face of the wheel for cleaning
weld joints or cutting out weld for pipe repair.
Arbor Diameter Thickness Max RPM Item #
5/8-11 4-1/2 in .045 in 13,580 NOR 66252842025
7/8 in 6 in .45 in 10,185 NOR 66252842202
5/8-11 4-1/2 in 1/8 in 13,580 NOR 66252843590
5/8-11 7 in 1/8 in 8,600 NOR 66252939259
Gemini XXL Depressed Center Wheel24 Grit, Type 27, Aluminum Oxide• Aluminum oxide is the most commonly used abrasive.• Best-suited for general purpose deburring and blending, it is
tough, economical and fracture resistant. • Commonly used on ferrous alloys, high tensile materials and
wood.
Arbor Diameter Thickness Max RPM Item #
5/8-11 4-1/2 in 1/4 in 13,580 NOR 66252843785
5/8-11 7 in 1/4 in 8,600 NOR 66252843791
Non-Woven Depressed Center DiscType 27, Ceramic Alumina• Blaze ceramic aluminia grain• Advanced resin bond• New coating process• Open structure
Arbor Dia. Grit Max RPM Item #
5/8-11 4-1/2 in 80 12,000 NOR 66254498101
Abrasives
Cubitron™ II Cut and Grind Wheels1/8” Thick, Type 27, Ceramic• 3M™ Cubitron™ II Cut and Grind wheels are engineered with precision-shaped grain to
cut faster than competitive ceramic products
Arbor Diameter Grit Max RPM Item #
5/8-11 7 in 36 8,500 3M 051141-28765
5/8-11 4-1/2 in 36 13,300 3M 051141-28762
Cubitron™ II Depressed-Center Grinding Wheels1/4” Thick, Type 27, Ceramic• Cubitron™ II cut-off wheels with precision-shaped grain
are engineered to cut faster than competitive ceramic products, offering significant productivity gains
Arbor Diameter Max RPM Item #
5/8-11 7 in 8,500 3M 076308-64319
5/8-11 4-1/2 in 13,300 3M 076308-64320
www.grovesindustrial.com • 713.675.47476
Cubitron™ II Fibre Disc 982CCeramic• 3M Precision Shaped Grain maintains super-sharp points
that cut exceptionally fast with less pressure• Disc life is significantly longer, completing more parts per
disc and requiring fewer disc changes
Arbor Diameter Grit Max RPM Item #
5/8-11 in 4-1/2 in 36 13,300 3M 051141-27425
5/8-11 in 7 in 36 8,600 3M 051141-27405
Cubitron™ II Flap Disc 969FType 29, Ceramic, 40 Grit• Abrasive flap design provides a soft and smooth cut on
rounded or irregular surfaces• Flaps wear down to expose fresh abrasive mineral, assuring
a fast and consistent cut• Durable Polyester backing material for high unit pressure
applications like beveling and slag removal• Resin bonding material handles the heat of grinding appli-
cations
Arbor Diameter Max RPM Item #
5/8-11 4-1/2 in 13,000 3M 076308-64391
Cubitron™ II Fibre Disc 987CCeramic, TN Quick Change• 3M Precision Shaped Grain (PSG) maintains super-sharp
points that cut exceptionally fast with less pressure• PSG runs cooler and disc life is significantly longer,
completing more parts per disc and requiring fewer disc changes
• Stiff fiber backing and a strong resin bond provide durabil-ity and tear-resistance for heavyweight applications such as high-pressure weld grinding or beveling
• Grinding aid incorporated on the disc minimizes grinding temperatures for heat-sensitive alloys.
Diameter Grit Max RPM Item #
4-1/2 in 36 13,300 3M 051141-27469
Scotch-Brite™ General Purpose Hand Pad 7747B6 x 9”• Superior alternative to steel wool, wire brushes, sandpaper,
and other nonwoven products for cleaning or finishing tasks
• Very fine grade aluminum oxide abrasive cleans, finishes, grains, denibs, and defuzzes
Item #
3M 048011-04229
Face Dia. Back Dia. Thickness ArborMax RPM Item #
6 in 4-3/4 in 2 in 5/8-11 6,000 NOR 66252809618
Cut-Off Wheel Type 146 Grit, Aluminum Oxide• Premium cutting• Treated aluminum oxide grain, a medium fine grit wheel• Main application: ferrous metals (welds, steel, iron), ideal
for sheet metal, minimum burr• Secondary application: stainless steel
Arbor Diameter Thickness Max RPM Item #
3/8 in 3 in 1/16 in 25,450 BUL 53313
Flap DiscType 29, Zirconia Alumina• Type 29 flap discs are more aggressive and the angled face provides larger surface
contact for higher stock removal• The poly/cotton combination provides low stretch and
strength for the high Zirconia concentration that Z3 con-tains.
Arbor Diameter Grit Max RPM Item #
5/8-11 4-1/2 in 36 13,300 CAM 42331
5/8-11 4-1/2 in 60 13,300 CAM 42334
5/8-11 4-1/2 in 80 13,300 CAM 42335
HP Metal Cutting Wheel Type 160 Grit, Aluminum Oxide• Proprietary material mix ensures durable long life wheels• Proprietary aluminum oxide grain combination for aggressive
cutting action• 2 full sheets of fiberglass for durability and safety
Flaring CupType 11, 16 Grit• Aluminum Oxide• Flaring cup wheels are designed for use on right angl portable cup grinders.• 2 full sheets of fiberglass for durability and safety
Arbor Diameter Thickness Max RPM Item #
7/8 in 6 in .040 in 10,100 DEW DW8725
www.grovesindustrial.com • 713.675.47477
Crimped Wire Wheel Brush3 in Brush Dia• Small diameter copper center wheels permanently mounted
onto a 1/4” stem to provide a very flexible brushing action
Bristle Dia.
Face Width
Max RPM
Trim Length Item #
.0118 in 1/2 in 20,000 1 in WEI 17616
Crimped Wire End Brush1 in Brush Dia, Steel• Solid end construction and very flexible brushing action ideal for
more demanding light-duty cleaning applications in corners and hard-to-reach areas.
Bristle Dia.
Max RPM
Shank Size
Trim Length Item #
.0104 in 22,000 1/4 in 1 in WEI 10010
Stringer Bead Wheel4 x .020 x 5/8-11• Cost effective for indoor light-duty applications• Rubber-based adhesive• Tan crepe paper backing
Item #
WEI 13122
Knot Wire End Steel Brush3/4 in Brush Dia, .020 in Wire Dia• Hollow End and Heavy-Duty Brushing Action with Some
Flexibility• Ideal for More Demanding Cleaning Applications in Recessed
Areas
Trim Length Item #
7/8 in WEI 10026
Knot Wire Cup Brush2-3/4 in Dia• Carbon and Stainless Steel fill• For use with small angle grinder
Bristle Dia. Thread
Max RPM
Trim Length Item #
.0200 in 5/8-11 14,000 1 in WEI 13286
Abrasives
Double Cut Carbide Bur • Double cut burrs are designed with right and left hand flutes combined to produce
smooth and fine finishes.• They produce small chips and give excellent control of the burr and grinder.• They can be used on steel, stain- less steel, high temp alloys and cast iron.
Style Cut Dia.Length of
Cut Shank Dia. Shape Item #
SA-5 1/2 in 1 in 1/4 in Cylindrical SGS 10178
SC-5 1/2 in 1 in 1/4 in Cylindrical SGS 11878
SD-5 1/2 in 7/16 in 1/4 in Ball SGS 12533
SD-11SD-42 1/8 in 1/8 in 1/8 in Ball SGS 12803
SE-5 1/2 in 7/8 in 1/4 in Oval SGS 13003
SF-1 1/4 in 3/4 in 1/4 in Tree SGS 13303
H-2 5/16 in 3/4 in 1/4 in Flame SGS 14403
SL-4 1/2 in 1-1/8 in 1/4 in Taper SGS 15253
SC-5L6 1/2 in 1 in 1/4 in Cylindrical SGS 16378
SE SH
SA SC
SF
SDSG
SL
www.grovesindustrial.com • 713.675.47478
Gemini® Vitrified Mounted Point1/4 in Spindle Dia• Aluminum Oxide• Cool cutting, less burn
Diameter Thickness Grit Max RPM Shape Item #
3/4 in 2-1/2 in 36 19,800 A1 NOR 61463624374
3/4 in 2-1/2 in 60 19,800 A1 NOR 61463624375
1 in 2-3/4 in 36 16,100 A3 NOR 61463624377
1 in 2-3/4 in 60 16,100 A3 NOR 61463624378
1-1/4 in 1-1/4 in 60 30,560 A4 NOR 61463624380
3/4 in 1-1/8 in 36 45,000 A5 NOR 61463624381
3/4 in 1-1/8 in 60 45,000 A5 NOR 61463624382
1 in 1 in 60 35,500 A21 NOR 61463624392
1/4 in 3/4 in 60 76,500 A24 NOR 61463624395
7/8 in 2 in 36 19,860 A11 NOR 61463624384
7/8 in 2 in 60 19,860 A11 NOR 61463624385
5/8 in 1/4 in 60 61,120 A26 NOR 61463624397
1-1/4 in 1/4 in 60 30,560 A37 NOR 61463624405
1 in 1 in 60 34,500 A38 NOR 61463624406
3/4 in 3/4 in 60 47,250 A39 NOR 61463624407
3/8 in 3/4 in 60 45,370 B52 NOR 61463624419
1 in 1 in 60 25,500 W220 NOR 61463624566
1-1/2 in 1/2 in 60 25,470 W236 NOR 61463624585
1-1/2 in 1-1/2 in 60 15,600 W238 NOR 61463624588
2 in 1 in 60 19,100 W242 NOR 61463624592
W SHAPES
For best mounted point performance, alwaysrun the mounted point at the maximumallowable speed according to ANSI B&.1.Refer to the speedchart included in eachshipment for proper operating speed.
Use “A” shapes for medium-to heavy-dutyblending
Ues ”B” Shape for light deburring and fin-ishedpolishing
Use “W” shape for offhand and precisiongrinding of medium to heavy stock
Use 36 grit and coarser for rough grinding
Use 60 and 90 grits for imparting fine fin-ishedor when grinding on narrow surfaces
It is the user’s responsibility to refer to andcomply with ANSI B&.1
Groves Industrial’s eCommerce solution allows you to access the information you need 24/7
• More Product Details
• Request Product Samples or Demonstrations
• Fast and Efficient Checkout Process Fewer steps saves time
• Competitive Pricing
Ef�cient eProcurement with grovesindustrial.com
B52A39A38A37
A26A24A21A11
A5A4A3A1
www.grovesindustrial.com • 713.675.47479
Blue Beast® Cow Leather Weld-ers GloveJersey Lined, Winged Thumb• One piece back• Sewn with DuPont™ Kevlar® for durability• Foam back• Cotton drill cuff lining• Reinforced palm and thumb strap• Cuff: Gauntlet
Size Item #
XL MEMGL 4600
Double Leather Palm Glove10 in length, Safety Cuff• Regular shoulder leather• Green patch on palm,thumb, & index finger• Striped canvas back
Size Item #
Large GC-6
Flame-Resistant Sleeves18 in Long• Comfortable and washable, these flame-resistant sleeves protect
upper arms from sparks in light welding applications. • They fit easily into welding glove cuffs. • The anti-static Weldlite™ fabric is rot and mildew resistant.
Item #
STE 1034-18EE
Leather Welding Bib Apron36 x 24 in, Leather String Closure
Item #
STE 12165
Cowhide MIG Welding GlovesCotton/Foam Lining, Double Reinforced Thumb• More durable, bourbon brown, Side split Cowhide.• 14” length.• A Cotton lined inside for added comfort.• Convenient Pull tab for ease of use and added protection.• Durable Welted fingers protect stitching. • Lock stitching with Kevlar thread for strength and heat
resistance.
Size Item #
Large TIL 1250L
Blue Bison™ CowhideWelding GlovesCotton Lined, Reinforced Thumb• Select Shoulder Split Cowhide leather construction• Stitched with Kevlar® adding strength and burn resistance• Cotton lined for extra comfort• One-piece back for extended glove life• Wing thumb increases comfort in open-handed work
Size Item #
Large PIP 73-7007
G-Tek® PolyKor™ Cut Resistant GlovesPolyurethane Coated Palm & Fingers• Seamless construction offers increased comfort and
breathability• Polyurethane coated palm for great abrasion resistance,
excellent puncture resistance and outstanding wet/dry grip• Knit Wrists• Salt & Pepper 13 Gauge PolyKor Blended Shell
Size Item #
Small PIP 16-150/S
Medium PIP 16-150/M
Large PIP 16-150/L
XL PIP 16-150/XL
Goatskin TIG Welding Gloves
• Top grain pearl goatskin leather• Seamless forefinger for enhanced feel.• 4” cuff, wing thumb.• Lock stitched with Kevlar® thread for added strength.
Size Item #
Large JTM1328L
Deerskin TIG Welding Gloves
• Lightweight pearl Deerskin split leather enhances dexterity.• Unlined to maximize feel• 4” cuff for added protection.• Straight thumb.• Includes Lock stitching with Kevlar® thread for added strength.• Caution - Deerskin split leather is not suitable for heavy handling.
Size Item #
Large TIL 25B-L
Safety
G OL VE
COMPANY
www.grovesindustrial.com • 713.675.474710
Foam Ear PlugsNRR 29 dB, Universal Size• Smooth, dirt resistant surface for hygiene• Comfortable for a wide range of ear canal sizes• CSA Class AL
Style Item #
Corded 3M 051138-29008
Uncorded 3M 051138-29009
ProFlex® Slip Resistant Rubber Cap Knee Pad • 840D nylon fabric cover• 12mm NBR foam padding cut to hug the knee• Anti-odor treatment• Buckle closure
Item #
ERG 335
Deep Round Crown Welders CapAssorted Prints• Single sided• Super soft brim
Size Item #
7-1/4 in HW 1003
7-3/8 in HW 1004
Chill-Its® Head Sweatband
• Thick, absorbent cotton terry• Elastic maintains snug fit
Material Color Item #
Terry Cloth White ERG 6550
V-Gard® Front Brim Hard HatNon-vented, Pinlock Suspension• ANSI Z89.1-2009, CSA 294.1-2005
Color Item #
White MSA 475358
V-Gard® Front Brim Hard HatNon-vented, 4-Point Ratchet Suspension• Polyethylene shell and self-adjusting crown straps provide
comfortable, lightweight protection.• ANSI/ISEA Z89.1-2009 (Class E, Type I)
Color Item #
Blue MSA 475359
Yellow MSA 475360
Orange MSA 475361
Green MSA 475362
Red MSA 475363
White MSA 475369
Gray MSA 475367
Full Brim Hard HatNon-vented, 4-Point Ratchet Suspension• Polyethylene shell and self-adjusting crown straps provide
comfortable, lightweight protection.• ANSI/ISEA Z89.1-2009 (Class E, Type I)
Color Item #
Yellow MSA 475366
Blue MSA 475368
Red MSA 475371
www.grovesindustrial.com • 713.675.474711
Speedglas™ Welding Helmet 9100With Auto Darkening Filter 9100XX• High Efficiency particulate respiratory protection sys• Lightweight, compact design with ergonomic, adjustable
head suspension.• Flip front welding shield allows for a clear, wide-view pro-
tective visor for grinding and setup
Lens Shade Item #
5, 8-13 3M 051141-56158
Welding Helmet Shell
• Molded from Noryl job proven superior in welding relate performance characteristics.• Unique design provides extended throat protection while blocking
fumes and smoke from face.• Size and shape of this welding helmet allows air to circulate to help
clear any smoke and fumes that seep in.• The air circulation evaporates perspiration in the perforated sweat-
band for a cooling effect.
Lens Shade Plate Size Item #
10 2 x 4-1/4 in FIB 5906-GY
Particulate Respirator 8210N95, No Exhalation Valve• NIOSH approved for at least 95 percent filtration efficiency
against certain non-oil based particles• Two-strap design with welded dual point attachment helps
provide a secure seal• Adjustable noseclip helps provide a custom fit and secure
seal
Size Item #
Standard 3M 051138-46457
Particulate Respirator 8511N95, Exhalation Valve• 3M Cool Flow Exhalation Valve reduces heat build-up
inside the respirator• Braided headbands two-strap design with dual point
attachment helps provide a secure seal
Size Item #
Standard 3M 051138-54343
Particulate RespiratorN95, No Exhalation Valve• 100% PVC-Free®.• Can be used against most welding fumes (free of oil).• Added carbon layer helps filter out nuisance ozone and
organic vapors.• HandyStrap® with buckle, allows mask to hang down
around the user’s neck when not in use.• Ventex® valve lets the hot air out fast so workers breath
easier and stay cool.• Soft foam nose cushion for added comfort and no pressure
points.• Exclusive Dura-Mesh® shell resists collapsing in heat and humidity.• Meets heat and flame resistance in accordance with ANSI/ISEA 110-2003 Section 7.11
Size Item #
Medium/Large MOLD 2800N95
Safety
Faceshield Headgear7 in Crown, Ratchet Suspension• Heat resistant, ratchet suspension, channel grip system, and
slot/pin mechanism with locking cams.• Includes ratchet headgear with 7 In. crown.• Uses 3-C ratchet headband or three protective cap mounting
mechanisms.• Faceshield Not Included.
Item #
FIB F-500
High Performance® Faceshield AdapterW/Speedy Mounting Loops• Faceshield visors to use with front brim hardhats.
Item #
FIB F5500
Heat Treated Shade Filter LensGlass• To prevent surface damage to welding filter plates, cover plates (in either plastic or glass) should be placed over them
Lens Shade Lens Size Item #
5 2 x 4-1/4 in ORS 932-105-05
9 2 x 4-1/4 in ORS 932-105-09
10 2 x 4-1/4 in ORS 932-105-10
11 2 x 4-1/4 in ORS 932-105-11
13 2 x 4-1/4 in ORS 932-105-13
9 4-1/2 x 5-1/4 in ORS 932-107-09
10 4-1/2 x 5-1/4 in ORS 932-107-10
11 4-1/2 x 5-1/4 in ORS 932-107-11
12 4-1/2 x 5-1/4 in ORS 932-107-12
Replacement Faceshield Visor.060 thickness, 9-3/4 x 19 in• Replacement Visor for Fibre Metal Helmet
Color Item #
Green ORS 932-4199UDG
Clear ORS 932-4199UCL
www.grovesindustrial.com • 713.675.474712
Nozzle Dip Anti-Spatter • Protects MIG gun nozzles, tips, fixtures and positioners• Non flammable and non toxic• Does NOT contain silicones or fluorocarbons• Does NOT contain any ozone depleting chemicals
Size Item #
16 oz ORS 108-16
Multi-Purpose LubricantAerosol• Protects metal from rust and corrosion, penetrates stuck
parts.• Displaces moisture and lubricates just about anything.• Also great when it comes to cleaning grease. grime and
other marks from most surfaces.
Size Item #
16 oz WD40 490088
Anti-SpatterAerosol• Safe, water-based formula• Nontoxic• Nonflammable• Does not contain suspect carcinogens such as methylene
chloride• Does not contain silicone
Size Item #
13 oz LPS 02116
Anti-Spatter • Use to protect welding equipment, jigs and work surfaces• Safe for aluminum and steel
Size Item #
32 oz S-G 1410001213452
1 gal S-G 1410000413454
All Purpose Industrial CleanerSassafrass Scent• Replaces most cleaner, detergents, degreasers you are using
now• Biodegradable and removes stains, dirt, grease, oil, adhe-
sives and much more
Size Item #
1 gal S-G 2710200613005
Citrus Pumice Hand Soap1 gal Pump Dispenser• Contains a natural citrus ingredient• Cleans without harsh solvents
Item #
GOJO 0955-04
Anti-Spatter and Nozzle Shield • For MIG gun nozzles and welding surfaces• Reduces spatter build up and clean up time• Heat resistant, nonflammable and paint compatible
Size Item #
16 oz ORS 0-1620-16
Premium Hydraulic Oil1 gal• High viscosity index and heat transfer properties prevent
cavitation.• Antisludge, antirust, antifoam additives included.• Formulated specifically for use with Enerpac pumps.
Viscosity Index Item #
100 Min ENP HF-101
®
SF 7909TM Anti-Weld Spatter • Temporary coating to protect parts being welded from
weld spatter• Will not affect weld reliability• Less grinding of parts post-weld assembly• Rinses off with water or alkaline cleaner
Size Item #
16 oz LOC 2025107
SF 7900TM Ceramic Shieldfor Welding • Ceramic, silicone-free protective coating• Spray coating dries within seconds• Protects contact tips, welding nozzles and jigs• Prevents adhesion of welding spatter for many hours
Size Item #
9.5 oz LOC 1616692
Chemicals
®
®
www.grovesindustrial.com • 713.675.474713
Valved Paint Marker • Produce fast-drying, opaque, permanent marks on metal,
wood, corrugated, rubber, plastic, glass, porous and non- porous surfaces
• For hard to mark surfaces
Color Item #
White DIAG 0968-500
Red DIAG 0968-520
Blue DIAG 0968-521
Green DIAG 0968-522
Orange DIAG 0968-523
Black DIAG 0918-500
Flat Soapstone • For the temporary marking of metal surfaces during fabri-
cation operations.• Made of all natural soapstone for superior marking• Marks will not contaminate welds and are easily removed
Qty/Box Item #
144 Stones BSI SSF-5
Industrial Alkaline Batteries1.5V• Contains a natural citrus ingredient• Cleans without harsh solvents
Battery Size UoM Item #
D Ea E-R EN95
C Ea E-R EN93
AA Ea E-R EN91
AAA Ea E-R EN92
9V Ea E-R EN22
White Cotton Blended Rags
• These wipers are cut from garments such as dress shirts, blouses, skirts and pants.
• It is an economical choice for oil and grease type clean-ups.
• Material is fairly lightweight.
Box Size Item #
10 lb RAG 1W-10
25 lb RAG 1W-25
50 lb RAG 1W-50
Temperature Indicator • Simple - no gauges or electronics• Greater density• Holder provides strong grip on the chalk avoiding slippage• Maximizes user efficiency in completing the application• Holder engineered for smooth operation
Temp. Range Item #
150°F ORS 719-TS0150
200°F ORS 719-TS0200
250°F ORS 719-TS0250
300°F ORS 719-TS0300
350°F ORS 719-TS0350
400°F ORS 719-TS0400
All Purpose Duct Tape DT8Silver, 48 mm x 54.8 m, 8 mil• Waterproof backing• Individually wrapped for easy identification and to keep
the roll clean until ready for use
Item #
3M 076308-98118
Value Masking Tape 101+Tan, 48 mm x 55 m, 5.1 mil• Cost effective for indoor light-duty applications
Item #
3M 051115-68710
Masking Tape 301+Yellow, 48 mm x 55 m, 6.3 mil• Easily identifiable, industrial-strength tape for paint mask-
ing, bundling, holding and identifying• Removes cleanly in one piece
Item #
3M 051115-64753
MRO
14www.grovesindustrial.com • 713.675.4747
Item Description Price
RAM13000045 5 Gallons $106.07
RAM13000055 55 Gallons $944.00
Item Description Price
RAM14400025 2.5 Gallons $93.71
RAM14400045 5 Gallons $164.29
Premium blade for sawing structurals, tubing and angles
Bi-Metal Blades for general purpose sawing of most metals
Blade Length x Price / Ft. + Weld Charge
• Combined with our new environmentally friendly recyclable containers.• We are offering the most economical and ecological choice around.• It is a clear, amber synthetic cutting & grinding fluid, formulated with a premium EP.• It is operator and environmentally safe, exhibits good detergency, and rejects tramp oil.• It offers long sump life and is easily maintained.
• Clear, dark blue semi-synthetic cutting & grinding fluid.• Formulated to contain no chlorine, sulfur, or phosphorous additives. • It is operator and environmentally safe, exhibits good detergency, and rejects trampoil. It offers long sump life and is easily maintained.
• Features - M42 HSS, positive rake, wide set tooth• Benefits - Tooth resists stripping in structurals• Applications - Structurals, Tubing, Angels
• Features - M42 HSS, positive rake, wide set tooth -5° positive rake tooth 4-6, 5-8 TPI -10° positive rake tooth 3-4 TPI & Coarser -Special tooth form• Benefits - Aggressive, wear-resistant, multi-purpose
blade• Applications - Easy through difficult-machining metals
in solids and structurals
Kool-ALL
Kleen-Kool Ultra
Blade Pricing
StructurALL Blade
Silencer Plus™
Semi-Synthetic Sawing Fluid
Concentrated Synthetic Sawing Fluid
Inch Single & Multi Pitch (Teeth per Inch) Price per ft
Weld ChargeWidth Gauge Set 2-3 3-4 4-6 5-8
3/4 0.035 0.058 333-146 333-158 $2.67 $4.391 0.035 0.058 333-223 333-234 333-246 333-258 $2.79 $4.39
1-1/4 0.042 0.065 333-323 333-334 333-346 333-358 $3.07 $4.391-1/2 0.050 0.080 333-423 333-434 333-446 333-458 $3.98 $4.39
Inch Single & Multi Pitch (Teeth per Inch) Price per ft Weld ChargeWidth Gauge 2-3 3-4 4-6 5-8
1 0.035 320-234 320-246 320-258 $2.93 $4.39
1-1/4 0.042 320-334 320-346 320-358 $3.23 $4.391-1/2 0.050 320-423 320-434 320-446 320-458 $4.18 $4.39
20.050 340-523 340-534 340-546 $5.42 $5.18
0.063 320-523 320-534 320-546 $5.42 $5.18
2-5/8 0.063 320-623 320-634 320-646 $7.29 $11.25
Wide set precision teeth provide greater back clearance
Pricing example below. Always round up to the nearest half foot.
Blade Material Price Per ft Length Material
PriceWeld
ChargeTotal Blade
Price14'6" x 1 x .035 x 5-8 Silencer Plus $2.79 14.5 $40.46 $4.39 $44.8515'6" x 1-1/4 x .042 x 5-8 StructurALL $3.23 15.5 $50.07 $4.39 $54.4620'6" x 1-1/2 x .050 x 4-6 StructurALL $4.18 20.5 $85.69 $4.39 $90.08
Volume discounts available, contact your local Groves representative for more details.
www.grovesindustrial.com 713.675.4747Copyright © 2017 Groves Industrial. All Rights Reserved. No images(s) or parts(s) from this may be reproduced without the written permission of Groves Industrial. Options, specifications, price and content is subject to change without notices or obligation. The products in this catalog must be used in accordance with OSHA regulations, as well as the manufacturer user instructions, warnings, and limitations accompanying each product.
Dual Column Miter Band Saw
TILT-FRAME SAW
Tube-Cutting Band Saw
• Highly productive, semi-automatic dual column machine• Cuts a wide range of materials including stainless and tool steel• Round tube cutting capacity: 24” (600mm)• Maximum bundle capacity: 23.6 x 16.3” (600x415mm)• 65-328 fpm (20-100mpm) band speed • 5 hp (4kW) band drive• Automatic feed control• Hydraulic band tension• Variable vise pressure control
• Digital read out of cutting angle• Work light• Hydraulic band tension• Feed rate indicator• Automatic feed control• Automatic guide arm setting• Pulley-driven, band brush• Variable vise pressure control - set of 2• Hydraulic angular position and lock
• Machine Capacity: 14 x 18" (356x457mm)• Can tilt 60 degrees left and 45 degrees right.• Material can be fed from either the left, right or front making it perfect for a variety of cuts.• Has a capacity of 14 x 18” and cuts solid or tube steel• Band Drive 2 HP• Speed 50 to 400fpm• Blade Width 1”• Blade Length 159”
Prices starting at
$45,895.00
Prices starting at
$79,895.00
Prices starting at
$19,995.00
TDC-600SA Olympia™
DCDS-750NC
TF-1418
IMST-V.1-0517