REFERENCESshodhganga.inflibnet.ac.in/bitstream/10603/4987/16/16_bibliography.pdf · Mexico, paper...
Transcript of REFERENCESshodhganga.inflibnet.ac.in/bitstream/10603/4987/16/16_bibliography.pdf · Mexico, paper...
118
REFERENCES
Abe, M, and Igusa T, (1995), “Tuned mass dampers for structures with closely
spaced natural frequencies”, Earthquake Engineering and structural Dynamics, Vol.
24, pp. 247-261.
Ahmadi, H.R, Crawshaw, J, and Fuller, K.N.G, (1995), “The influence of
nonlinearity on the response of rubber isolator to earthquake motions”, Proc. 10th
European conference on Earthquake Engineering, Duma (ed.), pp. 677-682.
Allred, B.A., Billings, L.J., and Shepherd, R., (1996), “Ultimate response
characteristics of base isolated structures”, Proc. of 11th
WCEE, Acapulco,
Mexico, paper no. 1348.
Arya, A.S., (1967), “Design and construction of masonry buildings in seismic
areas”, Bulletin, ISET, Vol. 4, No. 2, pp. 25-37.
Arya, A.S., Chandra, B., and Qamaruddin, M., (1978), “A new building system for
improved earthquake performance”, Proc. of 6th
symposium on Earthquake
Engineering, University of Roorkee, India, Vol. 1, pp. 499-504.
Arya, A.S., Chandra, B., and Rani, P., (1977), “Influence of natural disasters
(Earthquake) on Educational facilities, part-I – collection and analysis of available
119
information – annotated Bibliography”, Report of school of Research and Training
in Earthquake Engineering, Univ. of Roorkee, Roorkee, India.
Ayorinde, E.O., and Warburton, G.B., (1980), “Minimizing structural vibrations
with absorbers”, Earthquake Engineering and structural Dynamics, Vol. 8, No. 3,
pp. 219-236.
Bingze, S., Changrui, Y., Xiaolin, Z., and Siyuan, T., (1990), “Experimental study
and seismic response analysis of multi-storey brick buildings with friction base
isolation”, Proc. 5th
North America Masonry conference, Univ. of Ilinois, Urban-
Champaign, pp. 177-187.
Buckle, I., Nagarajaiah, S., and Ferrel, K., (2002), “stability of elastomeric seismic
isolation bearings: experimental study”, Journal of Structural Engineering, ASCE,
Vol. 128, No. 1, pp.03-11.
Caspe, M.S., (1970), “Earthquake isolation of multi-storey concrete structures”,
Journal of the American Concreate Institute, Vol. 11, pp.923-933.
Caspe, M.S., (1984), “Base isolation from earthquake hazards, an idea whose time
has come!”, 8th
world conference on Earthquake Engineering, San Francisco, Vol.
5, pp. 1031-1038.
120
Charleson, A.W., Wright, P.D., and Skinner, R.I., (1987), “wellington central
police station, base isolation of an essential facility”, Proc. Pacific conference on
Earthquake Engineering, New Zealand National society for Earthquake
Engineering, wairekei, New Zealand, Vol. 2, pp. 377-388.
Chen, Y.U., and Ahmadi, G., (1992), “Wind effects on base isolated structures”,
Journal of Engineering Mechanics, ASCE, Vol. 118, pp. 1708-1727.
Chen, Y.U., and Ahmadi, G., (1994), “Performance of a high damping rubber
bearing base isolation system for a shear beam structure”, Earthquake Engineering
and Structural Dynamics, Vol. 23, pp. 729-744.
Chopra, A.K.(2001), “Dynamics of Structures”, Prentice-Hall, Englewood Cliffs,
N.J.Chopra, A.K., Clough, D.P., Clough, R.W., (1973), “Earthquake resistance of
buildings with a soft first storey”, International journal of Earthquake Engineering
and Structural Dynamics, Vol. 1, pp. 347-355.
Chunxiang, Li., (2000), “Performance of multiple tuned mass dampers for
attenuating undesirable oscillations of structures under the ground acceleration”,
Earthquake Engineering and Structural Dynamics, Vol. 29, pp. 1405-1421.
121
Constantinou, M.C., and Tadjbaksh, I.G., (1983), “Probabilistic optimum base
isolation of Structures”, Journal of Structural Engineering, ASCE, Vol. 109, No. 3,
pp. 305-310.
Constantinou, M.C., and Tadjbaksh, I.G., (1985), “Optimum characteristic of
isolated structures”, Journal of Structural Engineering, ASCE, Vol. 111, No. 12, pp.
2733-2750.
Constantinou, M.C., and Tadjbaksh, I.G., (1985a), “Hysteretic dampers in base
isolation: random approach”, Journal of Structural Engineering, ASCE, Vol 111,
No. 4, pp. 705-721.
DAI,Zebing,Huang Jin Zhi,Wang Hong Xia (2004), “Semi Active control of a
cable stayed bridge under multiple support excitations”,Journal of Zhijiang
university science. vol 5 PP 317-325.
Delfosse, G.C., (1980), “Full Earthquake Protection through base isolation system”,
Proc. 7th
World conference on earthquake Engineering, Istanbul, Turkey, Vol. 8,
pp. 61-67.
Earthquake resistant regulation(1992), A world lists 1992, compiled by
International Association of Earthquake Engineering.
122
Fan, F.G., and Ahmadi, G., (1992), “Seismic response of secondary systems in base
isolated structures”, Engineering Structures, Vol. 14, No. 1, pp. 35-48.
Fintel, M., and Khan, R.F., (1969), “Shock absorbing soft storey concept for multi-
storey earthquake structures”, Journal of the American Concrete Institute, 66-29,
pp. 318-390.
Gent, A.N., and Lindley, P.B., (1959), “The compression of bonded rubber blocks”,
Proc. of the Institution of the Mechanical Engineers, pp. 111-117.
Green, N.B., (1935), “Flexible first-storey construction for earthquake resistances”,
Transactions A.S.C.E, Vol. 100, paper no. 1906, pp. 644-674.
Gueirreiro, L.M., and Azevedo, J.j., (1992), “Seismic behavior of base isolated
structures with nonlinear behavior”, Proc. of 10th
WCEE, Madrid, Spain, Vol. 4,
pp. 2379-2384.
Higashino, M., Aizawa, S., and Hayamizu, Y., (1988), “The study of base isolation
system for actual use”, Proc. of 9th
WCEE, Tokyo-Kyoto, Japan, Vol. 5, pp. 705-
710.
123
Hirasawa, M., Mikama, A., Takasaki, T., Miyami, T., and Uchida, K., (1988),
Aseismic design of a base isolated building and verification tests of an isolator”,
proc. of 9th
WCEE, Tokyo-Kyoto, Japan, Vol. 5, pp. 723-728.
Hwang, J.S., and Chiou, J.M., (1996), “An equivalent linear model of lead rubber
Seismic isolation bearings”, Engineering structures, Vol. 18, No.7, pp. 528-536.
Igusa, T., and Xu, K., (1994), “Vibration control using multiple tuned mass
dampers”, Journal of Sound and Vibration, Vol. 175, No. 4, pp. 491-503.
Inaudi, J.A., and Kelly, J.M., (1993), “optimum damping in linear isolation
systems”, Earthquake Engineering and Structural Dynamics, Vol. 22, pp. 583-598.
Jain, S.K., and Thakkar, S.K., (1998), “Response control of building with rubber”,
International journal of structural Engineering, Vol. 18, No. 2, pp. 109-125.
Jain, S.K., and Thakkar, S.K., (2003), “Quasi-static testing of laminated rubber
bearing”, Journal of the Institution of Engineers (India), Vol. 84, pp. 110-115.
Jangid, R.S., (1996), “optimum damping in a non linear base isolation system”,
Journal of sound and Vibration, 189(4), pp. 477-487.
124
Jangid, R.S., and Datta, T.K., (1994), Dyanmic characteristics of structure with
multiple tuned mass dampers”, Proc. of 10th
symposium on Earthquake
Engineering, University of Roorkee, India, pp. 259-267.
Jangid, R.S., and Datta, T.K., (2001), “Base Isolation for near fault motions”,
Earthquake Engineering and Structural Dynamics, Vol 30, pp. 691-707.
Jensen, H., Setareh, M., and Peek, R., (1992), “TMDs for vibration control of
systems with uncertain properties”, Journal of structural Engineering, ASCE, Vol.
118, NO. 12, pp. 3285-3296.
Kadir, A., (1982), “Rubber properties important in the design of bearings”, Proc. of
the International conference on natural rubber for Earthquake protection of
buildings and vibration isolation, Kuala Lumpur, Malaysia, Edited by Derham,
C.J., pp. 211-227.
Kaynia, A.M., Veneziano, D., and Biggs, J.M., (1981), “seismic effectiveness of
tuned mass dampers”, Journal of Structural Division, ASCE, Vol. 107, pp. 1465-
1484.
Kelly, J.M., (1982), “Aseismic base isolation”, Shock Vib.Dig., Vol 14, No.5,
pp.17-25.
125
Kelly, J.M., (1986), “Aseismic base isolation: review and bibliography”, Soil
Dynamics and Earthquake Engineering, Vol 5, No.3, pp. 202-216.
Kelly, J.M., (1988), “Base isolation in Japan”, report No. UCB /EERC -88/ 20,
Earthquake Engineering Reaserch center, University of California, Berkeley.
Kelly, J.M., (1990), “Base isolation:Liinear theory and design”, Earthquake spectra,
Vol. 6, No. 2, pp. 223-244.
Kelly, J.M., (1993), “Earthquake-resistant design with rubber”, Berlin Heidelberg
New York: Springer-Verlag.
Kelly, J.M., (1999), “The role of damping in seismic isolation”, Earthquake
Engineering and Structural Dynamics, Vol. 28, pp. 3-20.
Kelly, J.M., and Hodder , S.B., (1982), “Experimental study of lead and
elastomeric dampers for base isolation system in laminated Neopreme bearings”,
Bull. New Zealand National society for Earthquake Engineering, Vol. 15, pp. 53-
67.
Kelly, J.M., and Tsai, H.C., (1985), “Seismic response of light internal equipment
in base isolated structures”, Earthquake Engineering and Structural Dynamics, Vol.
13, pp. 711-732.
126
Kikuchi, M., and Aiken, I., (1997), “An analytical hysteresis model for elastomeric
seismic isolation bearings”, Earthquake Engineering and Structural Dynamics, Vol.
26, pp. 215-231.
Kitamura, H., Fjita, T., teramoto, T., and Kibara, H., (1988), “Design and analysis
of a Tower structure with a tuned mass damper”, Proc. 9th
world conference on
Earthquake engineering, Japan, Vol. 8, pp. 415-420.
Koh, C.G., and Kelly, J.M., (1990), “Application of fractional derivatives to
seismic analysis of base isolated models”, Earthquake Engineering and Structural
Dynamics, Vol. 19, pp. 229-241.
Koh, C.G., and Lim, H.L., (2001), Analytical solution for compression stiffness of
bonded rectangular layers”, International Journal of solids and Structures, Vol. 38,
pp. 445-455.
Krishna, J., and Chandra, B., (1969), “Strengthening of brick buildings in seismic
zones”, 4th
world conference on Earthquake Engineering, Chile.
Lee, D.M., (1980), “Base isolation for torsion reduction in asymmetric structures
under earthquake loading”, Engineering and Structural Dynamics, Vol. 11, No. 4,
pp. 229-241.
127
Lee, D.M., and Medland, I.C., (1978a), “ Estimation of base isolated structure
responses”, Bulletin of the New Zealand National society for Earthquake
Engineering, Vol. 11, No. 4, pp.234-244.
Lou, Y., Wang, M., and Su, Z., (1992), “Research of sliding shock absorbing of
multistorey brick buildings”, Proc. 10th
world conference on Earthquake
Engineering, Madrid, Spain, pp. 2499-2504.
Luca, A.D., and Faella, G., (1993), “Response of fixed base and base isolated R.C
frames”, Proc. of the International post-Smirt conference seminar on isolation,
energy dissipation and control of vibrations of structures, Capri (Napoli), Italy, pp.
701-708.
Luft, R.W., (1979), “Optimum tuned mass dampers for buildings”, Journal of
structural Division, ASCE, Vol. 105, pp. 2766-2772.
Lyan-ywan lu,ging-long lin,Tzu-chung kuo,(2008),”stiffness controllable isolation
system for near fault seismic isolation” Journal of engineering structure vol.30,pp
747-765.
128
Martel, R.R., (1929), “The effects of earthquake on buildings with a flexible first
storey”, Bulletin of the Seismological Society of America, Vol. 19, No. 3, pp. 167-
178.
Matsagar, V.A., and jangid R.S., (2004), “Influence of isolator Characteristics on
the response of base isolated structures”, Engineering structures, Vol. 26, pp. 1735-
1749.
Mayes, R.L., Jones, R.L., and Kelly, J.M., (1990), “The economics of seismic
isolation in buildings”, Journal of Earthquake spectra, Vol. 6, No. 2, pp. 245-263.
McNamara, R.J., (1977),”Tuned mass dampers for buildings”, Journal of structural
division ASCE, Vol. 103, pp. 1785-1798.
Miyama, T., (1992), “Seismic response of multi-storey frames equipped with
energy absorbing storey on its top”, Proc. 10th
world conference on Earthquake
Engineering, Madrid, spain, Vol. 7, pp. 4201-4206.
Mori, A., Moss, P.J., Cooke, N., and Carr, A.J., (1999a), The behavior of bearings
used for seismic isolation under rotation and axial load”, Earthquake Spectra, Vol.
15, No. 2, pp. 225-244.
129
Mostaghel, N., Hejazi, M., and Tanbakuchi, J., (1983), “Response of sliding
structure to earthquake harmonic motion”, Journal of Earthquake Engineering and
Structural Dynamics, Vol. 11, pp. 355-366.
Mostaghel, N., and Tanbakuchi, J., (1983a), “Response of sliding structure to
earthquake support motion”, Journal of Earthquake Engineering and Structural
Dynamics, Vol. 11, pp. 729-748.
Murty, C.V.R., (2005), “Learning earthquake design and construction”, Journal of
structural Engineering, Vol. 31, No. 4, pp. 327-328.
Naeim, F., and Kelly, J.M., (1999), “Design of seismic isolated structures from
theory to practice”, John Wiley, U.S.A.
Nagarajaiah, S., and Ferrell K., (1999), “Stability of elastomeric seismic isolation
bearings”, Journal of structural Engineering, ASCE, Vol. 125, No. 9, pp. 946-954.
Nagarajaiah.S and Narasimhan S (2004) “seismic control of smart base isolated
buildings with new semiactive variable damper”.Earthquake engineering and
structural dynamics, vol 36, pp 729-749.
Ohno, S., Watari, A., and Sano, I., (1977), “Optimum tuning of the dynamic
damper to control response of structures to earthquake ground motion”, Proc. 6th
130
world conference on Earthquake Engineering, New Delhi, India, Vol. 3, pp. 157-
161.
Okoshi, T., Nakawaka, S., and Kawamura, M., (1993), “Aseismic design of C-1
building: the biggest base-isolated buildingin the world”, Proc. of seminar on
seismic isolation, passive energy dissipation, and active control, San Francisco,
California, ATC-17-1, Vol. 1, pp. 413-423.
Ormondroyd, J., and Den Hartog, J.P., (1928), “ The theory of dynamic vibration
absorber”, Tran. A.S.M.E, A.P.M-50-7, pp. 9-22.
Palazzo, B., and Petti, L., (1995), seismic response control in base isolated systems
using tuned mass dampers”, European Earthquake Engineering, Vol. 2, pp. 3-12.
Palazzo, B., and Petti, L., (1999), “combined control strategy: Base isolation and
tuned Mass damping’, ISET Journal of Earthquake Technology, Vol. 36, pp.121-
137.
Pan, T.C., and Cui, W., (1994), “Dynamic characteristics of shear buildings on
Laminated rubber bearings”, Earthquake Engineering and Structural Dynamics,
Vol. 23, pp. 1315-1329.
131
Pan, T.C., and Kelly, J.M., (1983), “seismic response of torsionally coupled base
isolated structures” Earthquake Engineering and Structural Dynamics, Vol. 11, pp.
749-770.
Pan, T.C., and Kelly, J.M., (1984), “Seismic response of base isolated structures
with vertical – rocking coupling”, Earthquake Engineering and Structural
Dynamics, Vol. 18, pp. 1201-1217.
Peterson, N.R., (1980), “Design of large scale tuned mass damper in structural
control”, edited by H.H.E. Leipholz, North-Holland, Amsterdam.
Pinkaew, T., Lukkunaprasit, P., and Chatupote, P., (2003), “Seismic effectiveness
of tuned mass dampers for damage reduction of structures”, Engineering structures,
Vol. 25, pp. 39-46.
Plummer, H.C., and Blume, J.A., (1953), “Reinforced brick masonry – Lateral
force design’, Structural clay products institute, Washington.
Prawel, S.P., and Reinhorn, A.M., (1985), “Seismic retrofit of structural masonry
using a ferrocement overlay”, Third North Amer. Masonry conference, paper No.
59.
132
Qamaruddin, M., (1998), ‘A state-of the-art review of seismic isolation scheme for
masonry buildings”, Journal of Earthquake Technology, ISET, Vol. 35, No. 4, pp.
77-93.
Qamaruddin, M., Al-jabri K.S., and Mauroof A.L.M., (1994), “Seismic response of
multistorey masonry buildings with friction isolation system”,10th
Symposium on
Earthquake Engineering Roorkee, December 29-31, Vol. 1, pp. 327-334.
Qamaruddin, M., Qadeer A., and Ali, S.M., (1990), “Response of masonry building
with seismic base isolation”, Proc. 5th
northAm.Masonry conference, Univ. of
Illinois, Urbana-Champaign, pp. 189-200.
Qamaruddin, M., Rasheeduzzafar, Arya, A.S., and Chandra, B., (1986a), “seismic
response of masonry building with sliding substructure”, journal of Structural
Engineering, ASCE, Vol. 112, No.9, pp. 2001-2011.
Ramammurti, V., (1996), “Computer Aided Mechanical Design and Analysis”,
Third Edition, Tata McGraw-Hill publishing company limited.
Rao, P.B., and Jangid, R.S., (2001), “experimental study of base isolated
Structures”, Journal of Earthquake Technology, Vol. 38, No. 1, pp. 1-15.
133
Rao, P.B., and Jangid, R.S., (2001a), ‘Performance of sliding systems under near
fault motions”, Nuclear Engineering and Design, Vol. 233, pp. 259-272.
Sadek, F., Mohraz, B., Taylor, A., and Chung, R., (1997), A method of estimating
the parameters of tuned mass dampers for seismic applications”, Earthquake
Engineering and Structural Dynamics, Vol. 26, pp. 617-635.
Safak, E., and Frankel A., (1969), “ Effects of ground motion characteristics on the
response of base isolated structures”, proc. of 9th
WCEE, Acapulco, Mexico, paper
no. 1430.
Satio, H., Ueno, K., Takenaka, Y., and Murota N., (1996), “Structural design of
base isolated high rise buildings with high damping laminated rubber bearings”,
Proc. of 9th
WCEE , Acapulco, Mexico, paper no. 1330.
Skinner, R.I., (1982), “Base isolation provides a large building with increased
earthquake resistance: Development, design and construction”, Proc. of the
International conference on Natural rubber for earthquake protection of buildings
and vibration isolation, kuala Lumpur, Malaysia, Edited by Derham, C.J., pp. 82-
102.
Skinner, R.I., (1984), “Base isolated structures in New Zealand” 8th
world
conference on Earthquake Engineering, San Francisco, Vol. 5, pp. 927-934.
134
Skinner, R.I., Beck, J.L., and Bycroft, G.N., (1975), “A practical system for
isolating structures from earthquake attack”, International Journal of earthquake
Engineering and Structural Dynamics, Vol. 3, pp. 297-309.
Skinner, R.I.,Bycroft, G.N., McVerry, G.H., (1976), “Practical system for isolating
Nuclear power plants from earthquake attack”, Journal of Nuclear Engineering and
design, Vol. 36, pp.287-297.
Skinner, R.I., Kelly, J.M., and Heine, A.J.,(1975b), “Hysteretic dampers for
earthquake resistant structures”, International journal of Earthquake Engineering
and Structural Dynamics, Vol. 3, No. 3, pp. 287-296.
Skinner, R.I., and McVerry, G.H., (1975a), “Base isolation for increased
earthquake resistance of buildings”, Bulletin of the New Zealand National Society
for Earthquake Engineering, Vol. 8, No. 2, pp. 93-101.
Skinner, R.I., Robinson, W.H., and McVerry, G.H., (1993), “An introduction to
seismic Isolation”, John Willey and Sons, England.
Stanton, J.F., Scroggins, G., Taylor, A.W., and Roeder, C.W., (1990), “Stability of
laminated elastomeric bearings”, Journal of Structural Engineering, ASCE, Vol.
116, No.6, pp. 1351-1371.
135
Steinbrugge, K.V., and Flores, R., (1963), “The Chilean Earthquake of May 1960 –
A structural engineering view point”, Bulletin of the seismological Society of
America, Vol. 53, No. 2.
Tadjbakhsh, I.G., and Ma, J.J., (1982), “Rigid-body response of base isolated
structures”, Journal of structural Engineering, ASCE, Vol. 108, pp. 1806-1814.
Takeda, T., Hirano, S., Yoshihana, J., Nawaoka, Y., Uchida, H., and Nakamura,
M., (1988), “Study on base isolation system for earthquake protection and vibration
isolation by laminated high damping rubber bearings”, Proc. of 9th
WCEE, Tokyo-
Kyoto, Japan, Vol. 5, pp. 729-734.
Tarics, A.G., (1982), “Cost consideration of base isolation”, Proc of International
conference on natural rubber for earthquake protection of buildings and vibration
isolation, Kuala Lumpur, Malaysia, pp. 175-187.
Tarics, A.G., (1984), “The implementation of base isolation for the foothill
communities law and Justice center”, report to the national science foundation and
the country of San Bernardino, Reid and Tarics associates, San Francisco, CA.
Tsai, H.C., (1995), “The effect of tuned mass dampers on the seismic response of
base isolated structures”, International Journal of Solid Structures, Vol. 32, pp.
1195-1210.
136
Tsai (1997), “Dynamics response of base isolated shear beams bumping against
stops”, Earthquake Engineering and Structural Dynamics, Vol.26, pp. 515-528.
Tsai, H.C., and Kelly, J.M., (1989), “Seismic response of the superstructure and
attached equipment in a base isolated building” Earthquake Engineering and
Structural Dynamics, Vol.18, pp. 551-564.
Tsai, H.C., and Kelly, J.M., (1993), “Seismic response of heavily damped base
isolation Systems”, Earthquake Engineering and Structural Dynamics, Vol.22, pp.
633-645
Tsai, H.C., and Lee, C.C., (1998), “Compressive stiffness of elastic layers bonded
between rigid plates”, International Journal of Solids and Structures, Vol. 35, pp.
3053-3069.
Tsai, H.C., and Lin, G.C., (1993), “Optimum tuned mass dampers for minimizing
steady state response of support excited and damped systems”, Earthquake
Engineering and Structural Dynamics,Vol. 22, pp. 957-973.
Varma, V., Reddy, G.R., Vaze, K.K., and Kushwaha, H.S.,(2002), “Experimental
and analytical study of laminated rubber bearing and its application to PHWR
building”, Journal of Structural Engineering, Vol. 28, No. 4, pp. 199-204.
137
Villaverde, R., (1985), “Reduction in seismic response with heavily damped
vibration absorbers”, Earthquake Engineering and Structural Dynamics,Vol. 13, pp.
33-42.
Villaverde, R., (1994), “Seismic control of structures with damped resonant
appendages”, Proc. of 1st world conference on structural control, Los Angeles,
California, USA, pp. 113-119.
Villaverde, R., and Koyama, L.A., (1993), “Damped resonant appendages to
increase inherent damping in buildings”, Earthquake Engineering and Structural
Dynamics,Vol. 22, pp. 491-507.
Villaverde, R., and Martin, S.C., (1995), “Passive seismic control of cable stayed
bridges with damped resonant appendages”, Earthquake Engineering and
Structural Dynamics,Vol. 24, pp. 233-246.
Webster, A.C., and Vaicaitis, R., (1992), “Application of tuned mass dampers to
control vibrations of composite floor systems”, Eng. Journal, ASIC, pp. 116-124.
Westermo, B., and Udwadia, F., (1983), “Periodic response of a sliding oscillator
system to harmonic excitation”, Earthquake Engineering and Structural Dynamics,
Vol. 11, pp. 353-366.
138
Xu, K., and Igusa, T., (1992), “Dynamic characteristics of multiple substructures
with closely spaced frequencies”, Earthquake Engineering and Structural
Dynamics, Vol. 21, pp. 1059-1070.
Yamaguchi, H., and Harnpornchai, N., (1993), “Fundamental characteristics of
multiple tuned mass dampers for suppressing harmonically forced oscillations”,
Earthquake Engineering and Structural Dynamics, Vol. 22, pp. 51-62.
Yamahara, H., and Izumi, M., (1987), “Actual proof tests of the base isolated
building using full-sized model”, Shimizu construction, Tohoku University, Japan.
Yang, J.N., Danielians, A., and liu, S.C., (1991), Aseismic hybrid control systems
for building structures”, Journal of Engineering Mechanics, ASCE, 117(4), pp.
836-853.
Yoo, B., and Kim, Y.H., (2002), “Study on the effects of damping in laminated
rubber bearings on seismic response for a 1/8 scale isolated test structure”,
Earthquake Engineering and Structural Dynamics, Vol. 31, pp. 1777-1792.
Young, S.K., and Lee, D.G., (1993), “Seismic response of support isolated
secondary structures in a multi-storey structure”, Engineering structure, Vol. 15,
No. 5, pp. 335-347.