© Fraunhofer Institute SCAI and other members of the SIMDAT consortium Data Grids for Process and...
-
Upload
nathan-kirkpatrick -
Category
Documents
-
view
218 -
download
2
Transcript of © Fraunhofer Institute SCAI and other members of the SIMDAT consortium Data Grids for Process and...
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
Data Grids for Process and Product Development using Numerical Simulation and Knowledge Discovery
Marije Geldof
Fraunhofer SCAI, Germany
SIMDAT
21 – 23 June 2005
Jamil AppaBAE Systems, UK
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
The Grid House
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT Facts
• IST Grid IP project• 4 years• Start date: September 1st, 2004• 26 partners• www.simdat.org
Capability Providers
Grid Technologists
End Users
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT Objectives
• Develop federated versions of problem solving environments– Support of distributed product and process development– Test and enhance grid technology for access to distributed data
bases– Tools for semantic transformation between these data bases– Grid support for knowledge discovery
• Promote defacto standards • Raise awareness in important industrial sectors
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT - Strategy
• SIMDAT takes an ambitious and credible route to drive Grid technology to the heart of industrial process:
Phase 1: Connectivity Phase 2: Interoperability Phase 3: Knowledge
Deployment of Grid concepts, existing and emerging architectures with particular attention to data management.
Data aggregation through the use of ontological concepts.
Workflows for next-generation aggregated knowledge capture, discovery and mining.
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT - Overview
Four sectors of international economic importance:
Automotive
Pharmaceutical
Aerospace
Meteorology
Seven Grid-technology development areas:
Grid infrastructure
Distributed Data Access
VO Administration
Workflows
Ontologies
Analysis Services
Knowledge Services
The solution of industrially relevant complex problems using data-centric Grid technology.
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
V-GISC Conceptual view
• The project will develop an infrastructure based on a Virtual Database Service that provides a single view of distributed meteorological databases
– Improve visibility and access to data through a comprehensive discovery service based on metadata development
– Add value to existing data sets by enabling diverse databases to be used as a unique virtual resource
– Offer a subscription services and a variety of reliable delivery services
– Provide a global access control policy managed by the partners and integrated into their existing security infrastructure
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
SIMDAT Project Results
• Federated versions of existing commercial Problem Solving Environments (for example MSC.SímManager, ESI Composer, ESI SDM, LMS
Tec.Manager, LION SRS)• Grid enabled versions of (commercial) analysis services
(for example ESI PAM-CRASH, MSC.Nastran)• Grid technology services
– Commercial products for Grid support of Workflow, Ontologies– Grid enabled version of the WEKA data mining tool– Commercial product for Grid enabled model development
(LMS.OPTIMUS)• Contributions to standardisation activities• Industrial showcases solving complex problems
– Demonstration of the industrial relavance of the project results– (for example: Distributed knowledge discovery for the NVH
behaviour of multiple cars based on the same platform)
SIMDAT SIMDAT © Fraunhofer Institute SCAI and other members of the SIMDAT consortium
For more information
www.simdat.org
©BAE Systems and other members of SIMDAT consortium
SIMDAT Data Grids for Process and Product Development
using Numerical Simulation and Knowledge Discovery
©BAE Systems and other members of SIMDAT consortium
SIMDAT SIMDAT Aerospace Industry – Product Development
- Aerospace Industry: designs, manufactures and supports a wide range of products from electronic sub systems to complete systems like Airbus A340
- Key skills include systems integration, complete software and hardware development and advanced manufacturing
- Carried out in a collaborative environment with complex relationships
Dealing with complex product development in a collaborative and
complex business environment
Dealing with complex product development in a collaborative and
complex business environment
©BAE Systems and other members of SIMDAT consortium
SIMDAT SIMDAT Aerospace Activity Use Case
- Collaborative design of a complex sub-system- A scenario involving aggregation of distributed capabilities operating across organisational boundaries
- Objectives- To show how Grid technology and concepts can be used to improve
product design- Improved access to and use of physical modelling
- High-fidelity, integrated engineering data available sooner
- Controlled sharing of IP across organisations
- Improved management of analysis workflows and associated data
©BAE Systems and other members of SIMDAT consortium
SIMDAT SIMDAT Aerospace Activity Scenario
- Multi-disciplinary collaborative configuration design of a low-noise, high-lift landing system
©BAE Systems and other members of SIMDAT consortium
SIMDAT SIMDAT Aerospace Activity Scenario – CAE Design Lab
©BAE Systems and other members of SIMDAT consortium
SIMDAT SIMDAT CAE Design Lab - Exploration Demonstrator PM 12
- Objectives- Ability to populate a design space within the constraints so that optimum
can be chosen.- Inter-Enterprise secure and controlled access to simulation tools applied
to evaluate design points.- Success Measure
- Connectivity and interoperability of federated and distributed tools rather than the quality of the optimisation.
©BAE Systems and other members of SIMDAT consortium
SIMDAT SIMDAT Potential Topics for Collaboration
- Provisioning of experimental Test Data- Experimental tests- Data collected and provided as a service- Increases knowledge in the system- Challenging when driven by design optimisation
- Provisioning of analysis services for new disciplines- To enable study of dynamic effects – acoustics of deploying flap- Computational Aero Acoustics- Computationally challenging