High temperature epoxy,3 each

Epoxy applicator gun

Epoxy plunger, 4:1

Crimp tool

Exacto knife,15 blades

Metal socketinsertion tool

Meggitt Sensing Systems20511 Seneca Meadows Parkway

Germantown MD 20876USA

301 330 8811wilcoxon@meggitt.com

www.wilcoxon.comwww.wilcoxon.comwww.meggitt.com

Plastic socketinsertion tool,3 each

Scissors

Wire stripper

Crimp frame tool andcrimp positioner tool

Epoxy nozzle,10 each

sleeve crimp

contact socket

grounding spring

connectorinsert body

backshell

boot

In addition to custom built cable assemblies, Meggitt Sensing Systems also provides HTC and HTS Tool Kits for field assembly of the Wilcoxon 6Q

series of connectors. The High Temperature Crimp Kit is used to make a crimp connection to the socket, while the High Temperature Solder Kit

for use when the socket will be soldered to the wire. Included in the kit are all the tools necessary to prepare connectors and cables in the field,

including high temperature epoxy to backfill the connector to create a sealed, potted backshell.

The Wilcoxon 6Q boot used with a high quality Teflon coated cable, such as J9T2A, has set the standard as a ruggedized, submersible connector

cable combination. Rated at IP 68 and tested up to 650 p.s.i., 6Q connectors are usable in temperatures up to 200° C, and underwater submersible

to 230 feet. The flexible design of the 6Q connector enables it to be used in settings where the cable shield must be connected to the sensor body,

and also in industrial applications where the shield must be isolated from the sensor, which is made possible by removing the ground spring.

The pairing of of the new 6QN neoprene boot and J9T2 Tefzel cable is an ideal configuration for nuclear environments. The pairing of of the new 6QN neoprene boot and J9T2 Tefzel cable is an ideal configuration for nuclear environments.

Wilcoxon Viton boot connector is durable and made to last