XTRALIGHT™

LED Lighting Solutions

LED QUICK REFERENCE GUIDE

www.xtralight.com

Table of Contents

OUTDOOR INDOORPage Page

INDUSTRIALPage

™

LED Lighting Solutions

HIGH BAY ..............................................22-24

SPECIALTY HIGH BAY ...........................25

RECESSED ...................................................26

VAPOR TIGHT ............................................27

ROADWAY / STREET ................................2

AREA / SITE ..............................................3-4

WALL PACK ............................................... 5-7

FLOOD ..............................................................8

CANOPY ....................................................9-10

PARKING GARAGE .................................... 11

RETROFIT ...................................................... 12

RECESSED ..............................................14-15

SURFACE / SUSPENDED ......................16

COVE / CHANNEL .................................... 17

EMERGENCY / EXIT ................................18

RETROFIT .....................................................19

TUBE ...............................................................20

OUTDOORSOLUTIONS

™

LED Lighting Solutions 2

APPROVALS• ETL listed: Complies with UL 1598 and CSA C22.2

No. 250.0-08 Suitable for wet locations.• 3G Vibration Rated for Bridge/Overpass

Applications per ANSI C136.31-2010, Test Level 2.

COMPLIANCE• ANSI C136.2, .3, .10, .14, .15, .22, .25, .31, .37 and .41• ANSI/IES RP-8-14 Roadway Lighting• MSSLC Model Specification for LED Roadway

Luminaires v2 (2014)

PRODUCT PERFORMANCE

MODEL REPLACES LUMENS

CSRS36 & 52

Up to

150W HIDUp to

5,700

CSRM 75, 96, 125 & 150

Up to

400W HIDUp to

17,200

FEATURES • Operating temperature:

CSR-S -40°C to +45°C (-40°F to +113°F) CSR-M -40°C to +40°C (-40°F to +104°F)• Best in class Lumileds LEDs with 3000K (min 80 CRI),

4000K, 5000K and 5700K CCT (min 70 CRI).• Tool-free access to mounting and electrical components.• Controls ready luminaire is standard.• Distributions: Type II, Type III, Type IV and Type V.• Zero uplight (U0) is night sky friendly, reduces wasted light.• Optional backlight shielding.

CONSTRUCTION• Housing is a one-piece die-cast aluminum with integral

mounting for strength and durability.• Door is removable without tools and rear-hinged for

ease of installation and service.• LED boards and drivers are mounted directly to the

housing’s integral heat sink for thermal management.• No lens frame or secondary glass for maximum performance.• All fasteners are stainless steel.• Housing and door are protected with a thermoset

TGIC-polyester powder coat finish.

MOUNTING• Integral horizontal mast arm mounting for 1-1/4” to 2” IP

(1.66”-2.38”OD) for compatibility and ease of installation.• Horizontal orientation with internal +/- 5° adjustment for

leveling in 2.5° increments.• Bubble Level for lateral and longitudinal orientation

provides quick visual reference, speeding installation.• Bird guard for arm diameters smaller than 2” IP (2.38” OD).

Medium

Small

SMART ENGINEERING DESIGN

EASY TO INSTALLFLEXIBLE MOUNTING FEATURES

The Viento Area Light, our aesthetically sleek luminaire with excellent lumen performance just met its match! The Viento Wall Pack.

Product Family

3

™

LED Lighting Solutions 4

FEATURES• Operating temperature -40°C to +40°C

(-40°F to +104°F).

• Best in class Lumileds LEDs with 3000K (min 80 CRI), 4000K, 5000K and 5700K CCT (min 70 CRI).

• Distributions: Type II, Type III, Type IV and Type V. Types II, III, and IV available rotated right or left 90°, factory installed.

• Zero uplight (U0) is night sky friendly, reduces wasted light.

CONSTRUCTION• Housing: One-piece die-cast aluminum has integral

heat sink fins to optimize thermal management through conductive and convective cooling.

• The LED driver is mounted in direct contact with the casting to promote low operating temperature and long life.

• Housing and door are protected with a thermoset TGIC-polyester powder coat finish.

MOUNTING• Integral arm facilitates quick and easy installation.

• Stainless steel hardware fastens the integral arm securely to poles.

PRODUCT PERFORMANCE

MODEL REPLACES LUMENS

VNTM 100, 144 & 200

400W HID

> 21500

VNTL 231 & 300

1000W HID

> 32000

APPROVALS• ETL listed: Complies with UL 1598 and CSA C22.2

No. 250.0-08 Suitable for wet locations.

• 3G Vibration Rated for Bridge/Overpass Applications per ANSI C136.31-2010, Test Level 2.

• IP 66 Optics and Housing.

• Select models DLC Qualified. For a complete list of DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.

Medium

Large

VNTS

VIENTO SMALLCOMING SOON

5™

LED Lighting Solutions

FEATURES• Optical grade polymer is UV stabilized and impact

resistant.

• IP66 rated LED light engines prevent dust and moisture from degrading performance.

• Distributions: Type II Short, Type II Medium, Type III Medium and Type IV Short.

• Best in class Lumileds LEDs with 3000K (min 80 CRI), 4000K, and 5000K CCT (min 70 CRI).

• Zero uplight (U0) is night sky friendly, reduces wasted light.

CONSTRUCTION• Housing: Two-piece die-cast aluminum has integral

heat sink fins to optimize thermal management through conductive and convective cooling.

• Housing and door are protected with a thermoset TGIC-polyester powder coat finish

• LED driver is mounted in direct contact with the casting to promote low operating temperature and long life.

• Silicone gasket is included to prevent leakage and provide weather-tight protection.

• Custom colors available, consult factory.

• Emergency Battery Backup

• PIR Sensor

PRODUCT PERFORMANCE

MODEL CCT WATTS LUMENS

VNTW 5500L

4000K 55.7 5969

VNTW 8000L

4000K 79.6 8428

VNTW 11000L

4000K 102.3 10587

APPROVALS• ETL listed: Complies with UL1598 and CSA 22.2

Suitable for Wet Locations

BronzeWhite

SMART ENGINEERING DESIGN

EASY TO INSTALLCONTEMPORARY APPEARANCE

™

LED Lighting Solutions 6

Wall Pack

APPROVALS• ETL listed*: Complies with UL1598 and CSA 22.2

Suitable for wet locations.• Select models DLC Qualified. For a complete list of

DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.

• Lighting Facts listed*.

FEATURES • CCT: 4000K & 5000K. Other color temperature

options available.

• Energy-efficient replacement for HID.

• Rugged construction.

• Improved lumen maintenance over HID.

• Field serviceable fixture utilizing proprietary patented LED technology.

CONSTRUCTION LWP

• Housing is heavy-duty, die-cast aluminum.

• Finish - RoHS compliant, low-VOC, TGIC polyester bronze powder coat.

• High impact, heat resistant borosilicate glass lens is hinged and removable.

• Silicone gasket is included to prevent leakage and provide weather-tight protection.

OWP• Housing - Heavy-duty seam welded, 12 gauge (.080”

thick) 5052-H32 aluminum.

• Finish - RoHS compliant, low VOC. TGIC polyester powder coat. Custom colors available.

• Tempered glass lens sealed to faceplate, secured to housing with stainless hardware.

PRODUCT PERFORMANCE

MODEL REPLACESHID

WATTS LUMENS

LWP 25 100W 24.7 2558

LWP 50 175W 47.7 4251

LWP 72 400W 67.9 6356

LWP 100 400W 95.2 8153

OWP 150 400W 141.7 8947

*LWP only.

LWP 25 LWP 50 LWP 72/100 OWP

7™

LED Lighting Solutions

Wall Pack

FEATURES • Full cut off wall pack to minimize light trespass.

• CCT: 4000K & 5000K. Other color temperature options available.

• Energy-efficient replacement for up to 400W HID.

• Rugged construction.

• Improved lumen maintenance.

• Field serviceable fixture utilizing patented LED technology.

CONSTRUCTION• Housing is heavy-duty, die-cast aluminum.

• Finish - RoHS compliant, low VOC, TGIC polyester bronze powder coat.

• Silicone gasket is included to prevent leakage and provide weather-tight protection.

FCW• Forward and side throw optics for maximum light

distribution.

• Shallow back flush mount.

• Clear tempered glass lens.

LSW• Deep back mount for conduit and emergency

backup options.

PRODUCT PERFORMANCE

MODEL REPLACES HID

WATTS LUMENS

FCWM 4500L

175W 67.1 6919

FCWL7000L

400W 47.0 4308

APPROVALS• ETL listed*: Complies with UL1598 and CSA 22.2.

Suitable for wet locations.• Select models DLC Qualified. For a complete list of

DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.

• Lighting Facts listed.

*FCW only.

FCWM

FCWL LSW 67

LSW 36

MODEL REPLACESHID

WATTS LUMENS

LSW 36 70W 30.2 2537

LSW 67 175W 63.3 5419

™

LED Lighting Solutions 8

APPROVALS• ETL listed: Complies with UL1598 and CSA 22.2

Suitable for wet locations.

• Select models DLC Qualified. For a complete list of DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.

• Lighting Facts listed.

FEATURES • Energy-efficient replacement for up to a 100W HID.

• CCT 4000K & 5000K. Other color temperature options available.

• Improved lumen maintenance over HID.

• Field serviceable fixture utilizing proprietary patented LED technology.

CONSTRUCTION• Housing is heavy-duty, die-cast aluminum.

• Finish - RoHS compliant, low VOC. TGIC polyester bronze powder coat.

• Impact resistant tempered glass lens sealed with a silicone gasket to prevent leakage and provide weather-tight protection.

PRODUCT PERFORMANCE

MODEL CCT WATTS LUMENS

LFLS-2500L 4000K 25.0 2736

LFLS-2500L 5000K 25.8 2779

LFLM-4500L 4000K 47.2 5089

LFLM-4500L 5000K 46.8 4644

LFLL-7500L 4000K 68.2 7769

LFLL-7500L 5000K 68.0 7567

LFLL-9000L 4000K 91.9 9729

LFLL-9000L 5000K 94.5 9893

Flood

LFL MediumLFL Small LFL Large

9™

LED Lighting Solutions

Canopy

APPROVALS• ETL listed: Complies with UL1598 and CSA 22.2

Suitable for wet locations.• Select models DLC Qualified. For a complete list of

DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.

• Lighting Facts listed.

PRODUCT PERFORMANCE

MODEL CCT WATTS LUMENS

CCLS-2000L 4000K 24.3 2283

CCLS-2000L 5000K 25.4 2232

CCLS-3000L 4000K 31.8 2827

CCLS-3000L 5000K 33.6 2819

CCLM-4500L 4000K 47.3 4490

CCLM-4500L 5000K 46.9 4504

FEATURES • Energy-efficient replacement for up to 175W HID.

• Surface mount for building entrances, walkways or canopies.

• CCT: 4000K & 5000K. Other color temperature options available.

• Exceptional lumen maintenance.

• Field serviceable fixture utilizing proprietary patented LED technology.

CONSTRUCTION• Housing is heavy-duty, die-cast aluminum.

• Finish - RoHS compliant, low VOC. TGIC polyester bronze powder coat.

• Polycarbonate prismatic lens, injection molded, UV stabilized.

• Multiple 1/2” NPT access points for surface conduit or J-box mounting.

CCL Small CCL Medium

™

LED Lighting Solutions 10

CSC SSCFlat Lens

SSCDrop Lens

APPROVALS• Complies with UL1598 and CSA 22.2.• Select models DLC Qualified. For a complete list of

DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.

FEATURES • Energy-efficient replacement for up to HID.

• CCT: 4000K & 5000K. Other color temperature options available.

• Rugged construction.

• Exceptional lumen maintenance.

• Suitable for damp locations. (CSC)

• Suitable for wet locations. (SSC)

• Field serviceable fixture utilizing proprietary patented LED technology.

CONSTRUCTION• Housing - pre-painted white aluminum (CSC).

• Finish - RoHS compliant, low VOC. TGIC polyester powder coat. Custom colors available. (SSC)

• Polycarbonate lens sealed to door frame.

PRODUCT PERFORMANCE

MODEL REPLACESHID

WATTS LUMENS

CSC 34 100W 36.5 3444

SSC 17 100W 16.5 1463

SSC 67 175W 64.7 4731

Canopy

11™

LED Lighting Solutions

Parking Garage

FEATURES • Diffused illumination offers visual comfort and

eliminates glare.

• Multiple lumen packages provide flexibility for a variety of lighting applications.

• Weather resistant and corrosion free construction with no exposed parts to corrode.

• Field serviceable fixture utilizing proprietary patented LED technology.

CONSTRUCTION GLL

• Housing is heavy-duty, die-cast aluminum.• Finish - RoHS compliant, low VOC. TGIC polyester

bronze powder coat. • Polycarbonate prismatic lens, injection molded, UV

stabilized.• Multiple 1/2” NPT access points for surface conduit

or J-box mounting.

VTE-GARAGE:• High impact polyester, fire retardant fiberglass

housing is NSF listed.

• Impact resistant diffuser secured to housing with plastic cam latches.

• Stainless steel latches available.

• Poured-in-place gasket and cam latches seal the enclosures from most hostile environments.

APPROVALS• ETL listed: Complies to ANSI/UL 1598/CSA 22.2.

Suitable for wet locations.• Select models DLC Qualified. For a complete list of

DLC Qualified products visit: www.xtralight.com/dlc or www.designlights.org/qpl.

PRODUCT PERFORMANCE

MODEL REPLACESHID

WATTS LUMENS

GLL 52 175W 46.8 4650

VTE 17 75W 17.0 1651

VTE 25 100W 26.6 2250

VTE 42 150W 42.2 4062

VTE 67 200W 66.5 5722

GLL

VTE

™

LED Lighting Solutions 12

Outdoor Retrofit

FEATURES

• Retrofit Kits transform existing HID luminaires to highly efficient LED models without compromising the aesthetics of the original design. This solution is well suited for applications where the existing luminaire is in good condition and architecturally appealing.

• Retrofit kits have a 10-year warranty when a sample is submitted for testing.

• Energy-efficient.

• Exceptional light quality.

• DLC listing available upon request.

CONSTRUCTION

• High grade aluminum chassis.

• Replaceable, RoHS-compliant LED modules, utilize the chassis of the luminaire for heat dissipation for enhanced LED life.

PRODUCT PERFORMANCE

MODEL REPLACESHID

WATTS LUMENS

ARK 72 150W 71.8 7308

BRK 30 70W 30.0 2366

SRK 200 1000W 202.0 15920

SRK 300 1000W 275.9 27851

APPROVALS• Complies with UL 1598 and CSA 22.2

ARK SRKBRK