用课程诊改带动教学质量提升—— · 模式:“8字形质量改进螺旋”的常态化内部质量自保证运行模式 常态化:正常的状态使之持续化。做到如影随行!
国标型 普通整流二极管 螺旋式) Chinese Type Standard Recovery … · 2011. 1. 22. ·...
Transcript of 国标型 普通整流二极管 螺旋式) Chinese Type Standard Recovery … · 2011. 1. 22. ·...
-
02 >> www.china-liujing.com
国标型-普通整流二极管 (螺旋式) Chinese Type Standard Recovery Diodes (Stud Version)
国标型-普通晶闸管 (螺旋式) Chinese Type Phase Control Thyristors (Stud Version)
ZP5AZP10AZP20AZP30AZP50AZP100AZP200AZP300AZP500A
510203050100200300500
7.916314779160310470630
≤1.6≤1.6≤1.6≤1.6≤1.6≤1.8≤1.8≤1.8≤1.8
200~2000200~2000200~2000200~2000200~2000200~2000200~3000200~3000200~5000
≤2≤2≤6≤6≤12≤12≤12≤15≤15
≤4.0≤2.5≤1.4≤1.0≤0.6≤0.3≤0.2≤0.11≤0.068
-40~
+150
A1A2
A3C1C2
C3G1C4G2C5G3C6G4C7C8
SZ13SZ14SZ15SZ16SZ16SL17SL18
SL18 19SL20
型号
Type
正向平均电流
IF(AV) A
正向有效值电流
IF(RMS) A
通态峰值电压
VTM V
反向重复峰值电压
VRRM V
反向重复峰值漏电流
IRRM mA
结壳热阻
Rjc ℃/W
工作结温
Tj ℃
外型
Outline推荐散热器
Heatsink
/
/
/
≥100≥100≥100≥100≥100≥100
Rjc ℃/W≤3.0≤2.5≤1.0≤0.5≤0.14≤0.11≤0.11≤0.08≤0.04
Tj ℃
-40~
+125
外型
Outline
B1B2
B3D1D2
D3H1D4H2D5H3D6H4D7D8
推荐
散热器
Heatsink
SZ13SZ14SZ15SZ16SZ16SZ17SL18SL19SL20
IF(RMS) A816324880160320480800
VTM V
≤2.2≤2.2≤2.2≤2.2≤2.4≤2.4≤2.6≤2.6≤2.6
VRRM V
200~2000200~2000200~2000200~2000200~2000200~2000200~2000200~2000200~3000
IDRM mA
≤8.0≤8.0≤8.0≤10≤10≤10≤10≤30≤30
IGT mA
5~455~455~455~50
10~15010~20020~20020~20020~200
VGT V
≤2.5≤2.5≤2.5≤2.5≤2.5≤2.5≤2.5≤2.5≤2.5
IH mA
5~455~455~455~50
10~15010~20020~20020~20020~200
dV/dt V/μs
结壳热阻
工作结温
通态平均电流
正向电流有效值
通态峰值电压
正反向重复峰值电压
断态重复峰值电流
触发电流
触发电压
维持电流
断态电压临界上升率
通态电流临界上升率
di/dt A/μs
型号
Type
≥500≥500≥500≥800≥800≥800≥800≥800≥800
510203050100200300500
KP5AKP10AKP20AKP30AKP50AKP100AKP200AKP300AKP500A
IT(AV) A
特征
AC/DC变换器直流电源
机床控制
正向平均电流: 5-500A 反向重复峰值电压: 100-5000V 金属螺柱型结构 全封闭陶瓷-金属螺柱型结构 符合JB/T8949.2-1999标准 承受高浪涌电流能力
螺栓为阴极或阳极的正向或反向结构
FeaturesIF(AV)=5-500AVRRM=100-5000VMetal stud structureHermetic ceramic-metal stud structureConform to national standard JB/T8949.2-1999Capacity of supporting high surge currentStud cathode and stud anode version
Typical Applications典型应用AC/DC convertersDC power suppliesMachine tool controls
特征
通态平均电流: 5-500A 正反向重复峰值电压: 100-5000V 全密封陶瓷-金属螺柱型结构 全封闭玻璃-金属螺柱型结构 符合JB/T8950.2-1999标准 符合IEC国际电工委员会标准
FeaturesIT(AV)=5-500AVDRM/VRRM=100-5000VHermetic ceramic-metal stud structureHermetic glass-metal stud structureConform to national standard JB/T8950.2-1999Conform to IEC international electrical committee standard
Typical Applications典型应用直流电机控制
直流电源控制
交流开关及温度控制
同步电机励磁
DC motor controlsControls DC power suppliesAC switch and thermal control Synchronous motor excitation