• Customer Service: 877.963 · PDF fileweld neck flange with raised face lap-joint flange...
Transcript of • Customer Service: 877.963 · PDF fileweld neck flange with raised face lap-joint flange...
®
Swivel Joints
MA
NU
FAC
TUR
ING
• Q
UA
LITY
• SE
RVIC
E • M
AN
UFA
CTU
RIN
G •
QU
ALI
TY •
SERV
ICE
• MA
NU
FAC
TUR
ING
• Q
UA
LITY
• SE
RVIC
E • M
AN
UFA
CTU
RIN
dixonvalve.com • Customer Service: 877.963.4966
2 Dixon 877.963.4966
Safety
Features and Benefits
All weights and dimensions are approximate and subject to change without notice.Consult the factory when critical.
Color Coding System for Seal Identification:BU Buna-N - red stripeVI FKM - green stripeTF PTFE - naturalEP Ethylene Propylene - green and white stripes
• Full360°rotationalmovementoffersmaximumflexibility• Widespacingbetweendualballbearingracewaysensuresgreaterload-bearingcapacity• Precision-machineddesignensuresalignmentandyearsoftrouble-freeservice•AnO-ringdustsealprotectstheballracesandsealchamberfromoutsideelements.• Theradiuselbowdesignensuresasmoothflowpattern
Swivel Styles
• The O-ring pressure seal ensures a leak-proof seal and smoother rotation at lower torques than multiple designs.• Spring-loadedPTFEpressuresealsareavailablethrough3"• CarbonsteelandstainlesssteelO-ringtypeswivelsprovidegreaterstrengthandcorrosionresistancewhenneededforlowertorque
applications
• Thespring-loadedtripleV-ringsealingsystemensuresaleak-proofsealandanextendedseallifecomparedtotheconventionalsingle O-ring design.
• The3"-8"carbonsteelswivelsaremanufacturedfromcarbonsteelwithflamehardeneddualracewaysforgreaterloadbearingcapacityandlongerlife.
• Stainless steel swivels are manufactured in 316 grade stainless steel for superior corrosion resistance.
V-Ring Style Swivels
O-Ring Style Swivels
Dixon'scouplingsandretentiondevicesaredesignedtoworksafelyfortheirintendeduse.Theselectionoftheproperhose, coupling and retention device, and the proper application of the coupling to the hose are of utmost importance. Users must consider the size, temperature, application, media, pressure and hose and coupling manufacturer's recommendationswhenselectingtheproperhoseassemblycomponents.DixonrecommendsthatallhoseassembliesbetestedinaccordancewiththeAssociationforRubberProductsManufacturer's(ARPM)recommendationsandbeinspectedregularly(beforeeachuse)toensurethattheyarenotdamagedorhavebecomeloose.VisitARPMINC.comfor more information. Wheresafetydevicesareintegraltothecoupling,theymustbeworkingandutilized.Theuseofsupplementarysafetydevicessuchassafetyclipsorsafetycablesarerecommended. Ifanyproblemisdetected,couplingsmustberemovedfromserviceimmediately. Dixonisavailabletoconsult,trainandrecommendtheproperselectionandapplicationofallfittingswesell.WestronglyrecommendthatdistributorsandendusersmakeuseofDixon'sTestingandRecommendationServices.Call877.963.4966 or click dixonvalve.com to learn more.
Swivel Joints
3Dixon 877.963.4966
Flange Bolt Tightening Sequence (use appropriate gaskets and bolts)
Flange DiagramsThreaded Applications Welded Applications
Floating Applications(flange free to swivel)
threadedflangewith raised face
slip-onflangewith raised face
weldneckflangewith raised face
lap-jointflange
12 Bolt8 Bolt4 Bolt
slip-onflangewith raised face
Dimensions of 150 lb. ASA Steel Flanges
*1/16"raisedfaceisincludedinthethickness
9/16"11/16"3/4"7/8"15/16"15/16"15/16"1"
1-1/8"1-3/16"1-1/4"
1"1-1/2"2"
2-1/2"3"4"5"6"8"10"12"
NominalPipe Size
3-1/8"3-7/8"4-3/4"5-1/2"6"
7-1/2"8-1/2"9-1/2"11-3/4"14-1/4"17"
444448888
1212
Diameter ofBolt Circle
NumberofBolts
5/8"5/8"3/4"3/4"3/4"3/4"7/8"7/8"7/8"1"1"
Diameter ofBolt Holes
OD ofRaised Face
2"2-7/8"3-5/8"4-1/8"5"
6-3/16"7-5/16"8-1/2"10-5/8"12-3/4"15"
4-1/2"5"6"7"
7-1/2"9"10"11"
13-1/2"16"19"
FlangeO.D. Thickness * Diameter of
Bolts
1/2"1/2"5/8"5/8"5/8"5/8"3/4"3/4"3/4"7/8"7/8"
4 Dixon 877.963.4966
Theuseofswiveljointstocompensatefortwistinhose(i.e.Style20orStyle60)shouldbecarefullyreviewed,sincethehosemustbesufficientlystifftogeneratethetorqueneededtoactuatetheswivelbeforeitkinks.
Inmanyinstallations,thetwistiscausedbylateralmovementthatcanbeeliminatedbytheuseofaswiveljointthataddressesthelateralmovement(i.e.Style40orStyle30).
Wherethisisnotpossible,theuseofhoseswivelsmaybeasolution.Hoseswivelsaregenerallynon-ballbearingdesignsthatre-quirelesstorquetoinitiaterotation;however,hoseswivelsarenotdesignedforloadbearingservice.
Somehosesareunabletogenerateeventhelowtorquerequiredforahoseswivel,manymetalhosesfallintothisgroup.Otherhosesarestiffenoughtoturnalmostanyswivel,manyarmoredhosesfallintothisgroup.
Operation / Service
DixonswivelsarerecommendedforuseatthefollowingmaximumNon-ShockColdWorkingPressures(NSCWP)providedinPSI,atambienttemperatures(70°F).
• Whenusingflangedends,thepressureratingwillbereducedtocoincidewiththatoftheflangebeingused.Carbonsteelandstain-lesssteel150#flangesarerecommendedforuseat275maximumPSIatambienttemperature(70°F).
• Lubricationshouldbeperformedperiodically,dependingonserviceandoperationconditions.Twiceyearlyisnormallysufficient.
• Alldimensionsareapproximate.Wherecritical,consultthefactory.
1"1¼"1½"2"3"4"6"8"
---------
1000100010001000
---
1000---
100010001000
---------
---------
100010001000
------
1000---
100010001000
---------
150150150150150150150150
------
300300300---------
------
600600600---------
MalleableIronMI
BrassBR
AluminumAL
(O-Ring)Stainless
SteelOS
(V-Ring)Stainless
SteelSS
(O-Ring)CarbonSteel
OC
(V-Ring)CarbonSteel
CS
• Anycombinationofendconfigurations• Alternativesealmaterials:FKM,PTFE,EthylenePropylene
and FDA Buna• Alternativeballbearingmaterials:440stainlesssteeland316
stainless steel
• Alternative grease materials: FDA approved/food grade and silicone
• Drainholesorcounterbalancelugs• Swivelsforoxygenservice,steamserviceandsubmergedservicecanbespecificallydesignedforuniqueapplications(specialorder)
Pricing
Allpricingavailableuponrequest.Pleasecontactfactoryforpricingandproperequipmentselectionforthecorrectapplication.
Every swivel joint is built to order, due to this, they are not generally returnable. Return requests will be reviewed on a case by case basis. Restocking charges will be applicable on all returns. Restocking charges include 15%, plus any additional costs incurred.
Use with Hose
Options Available:
Swivel Joints
5Dixon 877.963.4966
Toselecttheproperswiveljointyouneedthefollowinginformation:
Size:
EndConfiguration:
MaximumWorkingPressure:
Style(shape):
Material:
Temperature Range:
Productbeinghandled:(ifachemical,pleaseadviseconcentration)
Ifforconstantrotation,adviseRPM:
Ifforsuctionservice,advisemaximumvacuumininchesofMercury(Hg):
Ordering Information - Swivels
Ourfactorysalesandengineeringstaffwillbehappytohelpyouevaluateyourswivelapplication.Pleasecall800.355.1991.
[A] Size[B] Style(seediagrams)
[C] End Connections
[D] Material
WWeld End
FFemale End
FG150# ASA Flange
TFTank Truck
Flange
PF300#ASAflange(notavailableon
aluminum)CS (V-Ring)carbonsteel
OC (O-Ring)carbonsteel
SS (V-Ring)stainless steel
OS (O-Ring)stainless steel
ALaluminum
BRbrass
MImalleableiron
Code # [E] Pressure Seal [F] Dust Seal [G] Retainers [H] Ball Bearings [I] Grease
Buna-N(standard)
FKM
PTFE
EthylenePropylene(requiressiliconegrease)
FDA Buna(O-ringonly)
0
1
2
3
4
Buna-N(standard)
FKM
---
EthylenePropylene(requiressiliconegrease)
FDA Buna
Noretainers(O-ringswivels)
Aluminum(standardinCSV-ring)
PTFE(standardinSSV-ring)
---
---
Carbonsteel(standard)
440 grade stainless
316 grade stainless
---
---
Standard
FDA approved/Food grade
Silicone(requiredwithEPRseals)
---
---
Theswivelshouldbepackedsothatthesurfacescomingincontactwiththefluidbeinghandledarecompatiblewiththatfluid.In the case of the use of the swivel in submerged service this would include the dust seals and ball bearings.
Dixonalwaysrecommendstheuseofstainlesssteelballbearingswhenbuildingaswivelforsubmergedservicesincethestandardcarbonsteelbearingscouldrusttogethermakingitimpossibletodisassembletheswivelandpossiblyaffectingitsoperation.
end c
onfig
urati
onExample 2
[A]20[B]
F[C]
X F[C]
CS[D]
0[E]
0[F]
1[G]
0[H]
0[I]
swive
l size
swive
l styl
e
end c
onfig
urati
on
swive
l mate
rial
pres
sure
seal
(Bun
a-N st
anda
rd)
dust
seal
(Bun
a-N st
anda
rd)
retai
ners
(V-Ri
ng O
NLY)
ball b
earin
gs(ca
rbon
stee
l stan
dard
)
grea
se
6 Dixon 877.963.4966
1. body
2. sleeve
3. ballbearings
4. seal retainer
5. V-ring(pressure)seal
6. spring retainer
7. spring
8. ballretainerscrew
9. greasefitting
10.O-ring(dust)seal
Special Options
45°Swivelassembly(style 30 shown)
Swivelassemblywithcounterweightlug(style 50 shown)
V-Ring Parts Identification List
Other available end configurations:• MaleNPTthread• 300#ASAflange• Tank car thread with gasket
• TTMAtanktruckflange• British pipe thread
6 5 4
2
109
3
1
78
weld end shown
V-ring Swivel Joints
7Dixon 877.963.4966
Typical V-Ring Swivel Applications
Floating Suction
Loading Arm
Floating Roof Drain
8 Dixon 877.963.4966
*Thelastcoilofthespringshasbeenupset(ODslightlylarger).When upset end is inserted into the holes provided in the spring retainer, the springs remain secure.
V-Ring Swivel Seal Replacement Procedure
1Removetheballretainerscrews.Addasufficient amountofsolventintoeachracewaytoflushout thelubricant.Rotatethesleeve,catchingtheballs
astheyfallout.Whenalltheballshavebeenremoved,thebodyandsleevecanbeseparated.Discardoldseals.Thoroughlycleanthebody,sleeveretainer,springretainerand springs. *
3Placetheassembledspringretainerunit(spring endfirst)intothebody.PlacethesetofVrings onto the spring retainer. Be sure V rings are installed
withthesealinglipsfacingtowardtheretainer.LubricatethebodyandsealswithaMolylubricantorequivalent.
2LubricatethebodyunitwithaMolylubricant or equivalent.
4Set the dust seal into O ring groove on the sleeve. Place the seal retainer on the sleeve with the grooved endfacingtheVrings.Lubricatethesleevewith
grease.
5Insertsleeveintobody,compressingswiveljointtogetheruntilballracesofbodyandsleeveareinalignment(donotrotateeitherunitwhilecompress-
ing).CareshouldbetakentoavoidpinchingorscoringofVrings.Dropballsintoracewayholes,rotatingthesleeveslowlyasyouload.Tomakespaceforalltheballs,insertascrewdriverintotheracewaywhilecontinuingtorotatethesleeveinonedirection(becarefulnottodamagethethreads).Thiswillcausetheballstojamup,makingroomfortheremainingballs.Nowreversetherotationofthesleeveandinserttheremainingballs.
6Reinstallballretainerscrewsuntiltight.Ifthisinterfereswiththesmoothrotationoftheballbear-ings,thenbackoff1/8-1/4turn.Athreadlocking
sealantisrecommendedtopreventscrewsfrombackingoff.Afterpressuretesting,theunitisreadyforinstallation.
Caution:Bodyandsleevearematchedduringmanufacturing.Donot mix components with other units.
V-ring Swivel Joints
9Dixon 877.963.4966
Replacement Ball Bearings for V-Ring Swivels
Optional Ball Bearings for V-Ring Swivels• Material:440stainlesssteelor316stainlesssteel• Ballbearingsareavailablein2'',3'',4'',6''and8''
Rebuild Kits for V-Ring Swivels
V-ringswivelrebuildkit-eachkitcontains3V-ringsinthematerialindicated,1Buna-Ndustseal,2ballretainerscrews,1greaseplugand10ballbearings.Thespringretainerandsealretainerare not includedintheV-ringswivelrebuildkits.
Optional Seals for V-Ring Swivels
V-Ring - Pressure Seals
O-Ring - Dust Seals
• V-Ringpressuresealmaterial:FKM,PTFE(SS),PTFE(CSandAL)whichincludeschangingtoPTFEretainers,EPRandBuna-N,Buna-Nisstandard.
• V-Ringpressuresealsareavailablein2'',3'',4'',6''and8"
• Dustsealmaterial:FKM,EPRandBuna-N,Buna-Nisstandard.• O-ringdustsealsareavailablein2'',3'',4'',6''and8''• CarbonsteelV-ringswivelscomestandardwithaluminumretainers.Thesemustbecompatiblewiththematerialflowingthroughthe
swivel. PTFE retainersareavailable.
Note:Allrebuildkitsareperplaneofrotation
Size Buna FKM PTFE EPR
2" 2RKVBU 2RKVVI 2RKVTF 2RKVEP3" 3RKVBU 3RKVVI 3RKVTF 3RKVEP4" 4RKVBU 4RKVVI 4RKVTF 4RKVEP6" 6RKVBU 6RKVVI 6RKVTF 6RKVEP8" 8RKVBU 8RKVVI 8RKVTF 8RKVEP
Size QuantityPer Plane of Rotation
CarbonSteel(standard) 440 Stainless Steel 316 Stainless Steel
Part # Part # Part #2" 50 38CSBA 38SSBA 38SSBA-3163" 62 38CSBA 38SSBA 38SSBA-3164" 84 38CSBA 38SSBA 38SSBA-3166" 96 12CSBA 12SSBA 12SSBA-3168" 84 34CSBA 34SSBA 34SSBA-316
10 Dixon 877.963.4966
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Single Plane V-Ring Style 20Weld end x Weld end
Caution:Weldendswiveljointsshouldbecompletelydisassembledpriortowelding,soasnottodamagetheseals.Careshouldbetakentoavoiddistortionofsealandballracediameters.
Size Part # Material Weight(lbs)
Dimensions(inches)
A
2" 220WXW CS -carbonsteel 9.2 5-5/16"SS - stainless steel 9.2
3" 320WXW CS -carbonsteel 12.9 5-3/4"SS - stainless steel 13.1
4" 420WXW CS -carbonsteel 24.4 7"SS - stainless steel 25.1
6" 620WXWCS -carbonsteel 54.5
8-3/8"SS - stainless steel 56.5AL - aluminum 21.6
8" 820WXWCS -carbonsteel 78.3
8-5/8"SS - stainless steel 92.3AL - aluminum 35.3
V-ring Swivel Joints
11Dixon 877.963.4966
150# ASA Flange x 150# ASA Flange
Single Plane V-Ring Style 20Female NPT x Female NPT
Size Part # Material Weight(lbs)
Dimensions(inches)
A
2" 220FXF CS -carbonsteel 12.7 8-11/16"SS - stainless steel 12.2
3" 320FXF CS -carbonsteel 17.0 10"SS - stainless steel 18.4
4" 420FXF CS -carbonsteel 36.7 11-3/4"SS - stainless steel 37.7
6" 620FXFCS -carbonsteel 67.5
12-1/8"SS - stainless steel 69.5AL - aluminum 25.8
8" 820FXFCS -carbonsteel ---
12-7/8"SS - stainless steel ---AL - aluminum ---
Size Part # Material Weight(lbs)
Dimensions(inches)
A
2" 220FGXFG CS -carbonsteel 21.7 10-5/16"SS - stainless steel 21.1
3" 320FGXFG CS -carbonsteel 36.0 11-1/4"SS - stainless steel 35.3
4" 420FGXFG CS -carbonsteel 57.4 13"SS - stainless steel 58.1
6" 620FGXFGCS -carbonsteel 104.2
15-3/8"SS - stainless steel 106.2AL - aluminum 39.0
8" 820FGXFGCS -carbonsteel 162.3
16-5/8"SS - stainless steel 170.3AL - aluminum 61.0
12 Dixon 877.963.4966
Single Plane V-Ring Style 30Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
2" 230FXF CS -carbonsteel 12.1 9" 3-11/16"SS - stainless steel 12.1
3" 330FXF CS -carbonsteel 20.6 10-7/8" 5-1/8"SS - stainless steel 21.3
4" 430FXF CS -carbonsteel 42.4 13-3/8" 6-3/8"SS - stainless steel 44.4
6" 630FXFCS -carbonsteel 84.3
16-1/4" 7-7/8"SS - stainless steel 84.2AL - aluminum 31.5
V-ring Swivel Joints
13Dixon 877.963.4966
Single Plane V-Ring Style 3010# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
2" 230FGXFG CS -carbonsteel 22.7 9-13/16" 4-1/2"SS - stainless steel 22.1
3" 330FGXFG CS -carbonsteel 39.4 11-1/2" 5-3/4"SS - stainless steel 38.2
4" 430FGXFG CS -carbonsteel 63.6 14" 7"SS - stainless steel 64.8
6" 630FGXFGCS -carbonsteel 121.0
17-7/8" 9-1/2"SS - stainless steel 120.9AL - aluminum 44.7
8" 830FGXFGCS -carbonsteel 196.3
20-5/8" 12"SS - stainless steel 207.9AL - aluminum 76.6
14 Dixon 877.963.4966
Single Plane V-Ring Style 40Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
2" 240FXF CS -carbonsteel 13.1 9-5/16" 3-11/16" 7-3/8"SS - stainless steel 13.1
3" 340FXF CS -carbonsteel 24.0 11-3/4" 5-1/8" 10-1/4"SS - stainless steel 24.2
4" 440FXF CS -carbonsteel 48.6 15" 6-3/8" 12-3/4"SS - stainless steel 51.1
6" 640FXFCS -carbonsteel 101.1
20-3/8" 7-7/8" 15-3/4"SS - stainless steel 98.9AL - aluminum 39.0
V-ring Swivel Joints
15Dixon 877.963.4966
Single Plane V-Ring Style 40150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
2" 240FGXFG CS -carbonsteel 23.7 9-5/16" 4-1/2" 9"SS - stainless steel 23.1
3" 340FGXFG CS -carbonsteel 42.8 11-3/4" 5-3/4" 11-1/2"SS - stainless steel 41.1
4" 440FGXFG CS -carbonsteel 69.8 15" 7" 14"SS - stainless steel 71.5
6" 640FGXFGCS -carbonsteel 137.8
20-3/8" 9-1/2" 19"SS - stainless steel 135.6AL - aluminum 52.2
8" 840FGXFGCS -carbonsteel 230.3
24-5/8" 12" 24"SS - stainless steel 245.5AL - aluminum 92.2
16 Dixon 877.963.4966
Double Plane V-Ring Style 50Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
2" 250FXF CS -carbonsteel 22.8 9-5/16" 3-11/16" 12-11/16"SS - stainless steel 23.3
3" 350FXF CS -carbonsteel 36.9 11-3/4" 5-1/8" 16"SS - stainless steel 37.3
4" 450FXF CS -carbonsteel 73.0 15" 6-3/8" 19-3/4"SS - stainless steel 76.2
6" 650FXFCS -carbonsteel 155.6
20-3/8" 7-7/8" 24-1/8"SS - stainless steel ---AL - aluminum 60.6
V-ring Swivel Joints
17Dixon 877.963.4966
Double Plane V-Ring Style 50150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
2" 250FGXFG CS -carbonsteel 32.8 9-5/16" 4-1/2" 14-5/16"SS - stainless steel 32.2
3" 350FGXFG CS -carbonsteel 55.7 11-3/4" 5-3/4" 17-1/4"SS - stainless steel 54.3
4" 450FGXFG CS -carbonsteel 94.2 15" 7" 21"SS - stainless steel 96.6
6" 650FGXFGCS -carbonsteel 192.3
20-3/8" 9-1/2" 27-3/8"SS - stainless steel 192.1AL - aluminum 73.8
8" 850FGXFGCS -carbonsteel 308.6
24-5/8" 12" 32-5/8"SS - stainless steel 337.8AL - aluminum 127.5
18 Dixon 877.963.4966
Double Plane V-Ring Style 60Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A
2" 260FXF CS -carbonsteel 21.40 9"SS - stainless steel 21.50
3" 360FXF CS -carbonsteel 34.30 10-7/8"SS - stainless steel 34.30
4" 460FXF CS -carbonsteel 72.00 13-3/8"SS - stainless steel 72.00
6" 660FXFCS -carbonsteel 118.00
16-1/4"SS - stainless steel ---AL - aluminum ---
V-ring Swivel Joints
19Dixon 877.963.4966
Double Plane V-Ring Style 60150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A
2" 260FXF CS -carbonsteel 42.00 9-13/16"SS - stainless steel 42.00
3" 360FXF CS -carbonsteel 83.00 11-1/2"SS - stainless steel 83.00
4" 460FXF CS -carbonsteel 106.00 14"SS - stainless steel 106.00
6" 660FXFCS -carbonsteel 172.00
17-7/8"SS - stainless steel 172.00AL - aluminum ---
8" 860FGXFGCS -carbonsteel 312.00
20-5/8"SS - stainless steel 312.00AL - aluminum ---
20 Dixon 877.963.4966
Double Plane V-Ring Style 70Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
2" 270FXF CS -carbonsteel 23.7 9-5/16" 3-11/16SS - stainless steel 24.35
3" 370FXF CS -carbonsteel 40.3 11-3/4" 5-1/8"SS - stainless steel 40.2
4" 470FXF CS -carbonsteel 79.2 15" 6-3/8"SS - stainless steel 82.9
6" 670FXFCS -carbonsteel 172.4
20-3/8" 7-7/8"SS - stainless steel ---AL - aluminum ---
V-ring Swivel Joints
21Dixon 877.963.4966
Double Plane V-Ring Style 70150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
2" 270FGXFG CS -carbonsteel 33.8 9-5/16" 4-1/2"SS - stainless steel 33.2
3" 370FGXFG CS -carbonsteel 59.1 11-3/4" 5-3/4"SS - stainless steel 57.2
4" 470FGXFG CS -carbonsteel 100.4 15" 7"SS - stainless steel 103.3
6" 670FGXFGCS -carbonsteel 209.1
20-3/8" 9-1/2"SS - stainless steel 206.8AL - aluminum 81.5
8" 870FGXFGCS -carbonsteel 342.6
24-5/8" 12"SS - stainless steel 375.4AL - aluminum 143.0
22 Dixon 877.963.4966
Triple Plane V-Ring Style 80Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
2" 280FXF CS -carbonsteel 33.0 9-5/16" 9-9/16" 3-11/16"SS - stainless steel 33.5
3" 380FXF CS -carbonsteel 53.2 11-3/4" 10-7/8" 5-1/8"SS - stainless steel 53.3
4" 480FXF CS -carbonsteel 103.6 15" 13-3/8" 6-3/8"SS - stainless steel 108.0
6" 680FXFCS -carbonsteel 226.9
20-3/8" 16-1/4" 7-7/8"SS - stainless steel 226.6AL - aluminum ---
V-ring Swivel Joints
23Dixon 877.963.4966
Triple Plane V-Ring Style 80150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
2" 280FGXFG CS -carbonsteel 43.1 9-5/16" 9-13/16" 4-1/2"SS - stainless steel 42.4
3" 380FGXFG CS -carbonsteel 72.0 11-3/4" 11-1/2" 5-3/4"SS - stainless steel 70.3
4" 480FGXFG CS -carbonsteel 124.8 15" 14" 7"SS - stainless steel 128.4
6" 680FGXFGCS -carbonsteel 263.6
20-3/8" 17-7/8" 9-1/2"SS - stainless steel 263.3AL - aluminum 102.2
8" 880FGXFGCS -carbonsteel 420.9
24-5/8" 20-5/8" 12"SS - stainless steel 467.6AL - aluminum 178.0
24 Dixon 877.963.4966
Triple Plane V-Ring Style 10Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
2" 210FXF CS -carbonsteel 32.0 9-5/16" 9"SS - stainless steel 32.5
3" 310FXF CS -carbonsteel 49.8 11-3/4" 10-7/8"SS - stainless steel 50.4
4" 410FXF CS -carbonsteel 97.4 15" 13-3/8"SS - stainless steel 101.3
6" 610FXFCS -carbonsteel 210.2
20-3/8" 16-1/4"SS - stainless steel ---AL - aluminum ---
V-ring Swivel Joints
25Dixon 877.963.4966
Triple Plane V-Ring Style 10150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings • Aluminum forretainersincarbonsteelswivels • PTFE for retainers in stainless steel swivels
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
2" 210FGXFG CS -carbonsteel 42.1 9-5/16" 9-13/16"SS - stainless steel 41.4
3" 310FGXFG CS -carbonsteel 68.6 11-3/4" 11-1/2"SS - stainless steel 67.4
4" 410FGXFG CS -carbonsteel 118.6 15" 14"SS - stainless steel 121.7
6" 610FGXFGCS -carbonsteel 222.1
20-3/8" 17-7/8"SS - stainless steel 233.9AL - aluminum 97.2
8" 810FGXFGCS -carbonsteel 386.9
24-5/8" 20-5/8"SS - stainless steel 430.1AL - aluminum 162.8
26 Dixon 877.963.4966
O-Ring Parts Identification List
Spring-Loaded PTFE Pressure Seal for O-Ring Swivels
Cross Sectional View of Seal(for use in sizes 1" - 3")
Special Options for O-Ring Swivels
1)O-ring(dust)seal
2)ballretainerscrew
3)O-ring(pressure)seal
4)greasefitting
5)ballbearings
Other available end configurations:• Tank car thread with gasket• TTMAtanktruckflange
Swivel with Handle(style 40 shown)
SwivelAssemblywithCounterweight Lug(style 40 shown)
Tank Car Swivel(style 30 shown)
femaleNPTshown
O-ring Swivel Joints
27Dixon 877.963.4966
Typical Applications for O-Ring Swivels
Hose Loaders
Note:style60mayalsobeusedinthisapplication
Loading Arm
28 Dixon 877.963.4966
O-Ring Swivel Seal Replacement ProcedureNote:Instructionsnotforassemblywithspring-loadedPTFEpressureseal.Consultthefactory.
2InstallthenewOringsonthesleeve,dustsealtotherear,product(pressure)sealupfront.
1Removetheballretainerscrews.Addasufficient amountofsolventintoeachracewaytoflushout thelubricant.Rotatethesleeve,catchingtheballs
astheyfallout.Whenalltheballshavebeenremoved,thebodyandsleevecanbeseparated.Discardoldseals.Thoroughlycleanthebodyandsleeve.
4Insertthesleeveintothebody,slowlyrotatethesleevewhileinsertingintothebody.
3Lubricatethebodyandthesleevewithgrease. 6Reinstallballretainerscrewsuntiltight.Ifthisinterfereswiththesmoothrotationoftheballbear-ings,thenbackoff1/8-1/4turn.Athreadlocking
sealantisrecommendedtopreventscrewsfrombackingoff.Afterpressuretesting,theunitisreadyforinstallation.
5Whenthesleeveisfullyinserted,feedtheballbear-ingsintotheracewayswhilerotatingthesleeve.Tomakespaceforalltheballs,insertascrewdriverinto
theraceway,whilecontinuingtorotatethesleeveinonedirection(becarefulnottodamagethethreads).Thiswillcausetheballstojamup,makingroomfortheremainingballs.Nowreverserotationofsleeveandinserttheremain-ingballs.
Caution:Bodyandsleevearematchedduringmanufacturing.Donotmixcomponentswithotherunits.
O-ring Swivel Joints
29Dixon 877.963.4966
Rebuild Kits for O-Ring SwivelsO-ringswivelrebuildkit-eachkitcontains1O-ring(pressureseal)inthematerialindicated,1Buna-Ndustseal,2ballretainerscrews,1greaseplugand10ballbearings.
Note:Allrebuildkitsareperplaneofrotation
Optional Ball Bearings for O-Ring Swivels• Material:440stainlesssteelor316stainlesssteel• Ballbearingsareofferedin1'',1¼",1½",2'',3''and4''
Replacement Ball Bearings for O-Ring Swivels
Optional Seals for O-Ring Swivels
O-Ring - Pressure Seals
• O-ringpressuresealmaterial:FKM,spring-loadedPTFE,EPR,foodgradeBunaandBuna-N,Buna-Nisstandard.• O-ringpressuresealsareavailblein1'',1¼ and1½",2'',3''and4''
O-Ring - Dust Seals
• Dustsealmaterial:FKM,EPRandBuna-N,Buna-Nisstandard.• O-ringdustsealsareavailablein1'',1¼ ,1½",2'',3''and4''.
Note:Whenachangeofsealsisordered,onlythepressuresealischangedunlessspecificallyrequestedbythecustomer.
Size Buna FKM PTFE EPR
1" 1RKOBU 1RKOVI 1RKOTF ---1¼and1½" 150RKOBU 150RKOVI 150RKOTF 150RKOEP
2" 2RKOBU 2RKOVI 2RKOTF 2RKOEP3" 3RKOBU 3RKOVI 3RKOTF 3RKOEP4" 4RKOBU 4RKOVI --- 4RKOEP
Size QuantityPer Plane of Rotation
CarbonSteel(standard) 440 Stainless Steel 316 Stainless Steel
Part # Part # Part #2" 40 14CSBA 14SSBA 14SSBA-3163" 56 14CSBA 14SSBA 14SSBA-3164" 46 38CSBA 38SSBA 38SSBA-3166" 60 38CSBA 38SSBA 38SSBA-3168" 80 38CSBA 38SSBA 38SSBA-316
30 Dixon 877.963.4966
Single Plane O-Ring Style 20Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Size Part # Material Weight(lbs)
Dimensions(inches)
A
1" 120FXFOC -carbonsteel 2.80
3-15/16"OS - stainless steel 2.50AL - aluminum 1.10
1¼" 12520FXF AL - aluminum 1.40 3-31/32"
1½" 15020FXF
OC -carbonsteel 3.55
4"OS - stainless steel 3.55AL - aluminum 1.40BR -brass 4.30MI -malleableiron 3.80
2" 220FXF
OC -carbonsteel 6.30
5-9/16"OS - stainless steel 6.80AL - aluminum 3.50BR -brass 8.50MI -balleableiron 7.50
3" 320FXF
OC -carbonsteel 8.60 5-7/8"OS - stainless steel 9.00AL - aluminum 4.00
5-29/32"BR -brass 11.10MI -malleableiron 9.70
4" 420FXF AL - aluminum 7.30 7-5/8"
O-ring Swivel Joints
31Dixon 877.963.4966
Single Plane O-Ring Style 20150# ASA Flange x 150# ASA Flange
Size Part # Material Weight(lbs)
Dimensions(inches)
A1" 120FGXFG OC -carbonsteel 7.80 7-9/32"
1½" 15020FGXFGOC -carbonsteel 11.60 8-1/16"OS - stainless steel 11.60AL - aluminum --- 8-11/16"
2" 220FGXFGOC -carbonsteel 16.60 8-17/32"OS - stainless steel 16.60AL - aluminum 7.50 10-3/8"
3" 320FGXFGOC -carbonsteel 30.60 9-5/8"OS - stainless steel 30.60AL - aluminum 10.00 11-5/32"
4" 420FGXFG AL - aluminum 13.00 13-5/16"
32 Dixon 877.963.4966
Single Plane O-Ring Style 30Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
1" 130FXF OC -carbonsteel 3.6 4-13/32" 2-3/16"OS - stainless steel 3.0 5-29/32" 2-11/16"
1½" 15030FXF
OC -carbonsteel 5.0 5-7/16" 3-15/32"OS - stainless steel 5.6AL - aluminum 1.7
4-11/16" 3"BR -brass 5.2MI -malleableiron 4.6
2" 230FXF
OC -carbonsteel 7.6 6-21/32" 3-1/4"OS - stainless steel 6.3AL - aluminum 4.1
6-3/16" 2-7/8"BR -brass 9.9MI -balleableiron 8.8
3" 330FXF
OC -carbonsteel 13.4 8-9/64" 4-13/16"OS - stainless steel 13.2AL - aluminum 5.2
7-1/16" 3-7/8"BR -brass 15.4MI -malleableiron 13.0
4" 430FXF AL - aluminum 9.2 9-1/8" 4-3/4"
O-ring Swivel Joints
33Dixon 877.963.4966
Single Plane O-Ring Style 30150# ASA Flange x 150# ASA Flange
Tank Truck Flange x Tank Truck Flange
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
1" 130FGXFG OC -carbonsteel --- 6-3/32" 3-3/16"OS - stainless steel --- 6-19/32" 3-11/16"
1½" 15030FGXFGOC -carbonsteel --- 7-7/8" 4-11/16"OS - stainless steel ---AL - aluminum --- 7-1/32" 5-11/32"
2" 230FGXFGOC -carbonsteel 20.20 8-1/32" 4-1/2"OS - stainless steel 20.20AL - aluminum --- 8-5/8" 5-9/32"
3" 330FGXFGOC -carbonsteel 32.90 9-7/8" 5-3/4"OS - stainless steel 32.90AL - aluminum 12.80 9-11/16" 6-15/32"
4" 430FGXFG AL - aluminum 14.00 11-31/32" 7-19/32"
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
2" 230TFXTFOC -carbonsteel --- --- ---OS - stainless steel ---AL - aluminum --- --- ---
3" 330TFXTFOC -carbonsteel --- --- ---OS - stainless steel ---AL - aluminum --- 8-3/4" 5-9/16"
4" 430TFXTF AL - aluminum 12.00 10-15/16" 6-9/16"
34 Dixon 877.963.4966
Single Plane O-Ring Style 40Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
1" 140FXF OC -carbonsteel 4.4 4-59/64" 2-3/16" 4-3/8"OS - stainless steel 5-59/64" 2-11/16" 5-3/8"
1½" 15040FXF
OC -carbonsteel --- 7-11/16" 3-15/32" 6-15/16"OS - stainless steel 7.0AL - aluminum 2.3
6-1/8" 3" 6"BR -brass 6.8MI -malleableiron 6.2
2" 240FXF
OC -carbonsteel 8.5 7-17/32" 3-1/4" 6-1/2"OS - stainless steel ---AL - aluminum 4.5
6-11/16" 2-7/8" 5-3/4"BR -brass 11.2MI -balleableiron 9.1
3" 340FXF
OC -carbonsteel 17.7 10-1/8" 4-13/16" 9-5/8"OS - stainless steel ---AL - aluminum 5.9
8-1/4" 3-7/8" 7-3/4"BR -brass 18.0MI -malleableiron 15.0
4" 440FXF AL - aluminum 10.2 10-5/8" 4-3/4" 9-1/2"
O-ring Swivel Joints
35Dixon 877.963.4966
Tank Truck Flange x Tank Truck Flange
Single Plane O-Ring Style 40150# ASA Flange x 150# ASA Flange
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
1" 140FGXFG OC -carbonsteel 8.90 4-59/64" 3-3/16" 6-3/8"OS - stainless steel 8.90 5-59/64" 3-11/16" 7-3/8"
1½" 15040FGXFGOC -carbonsteel --- 7-11/16" 4-11/16" 9-3/8"OS - stainless steel ---AL - aluminum --- 6-1/8" 5-11/32" 5-11/16"
2" 240FGXFGOC -carbonsteel 21.10 7-17/32" 4-1/2" 9"OS - stainless steel 21.10AL - aluminum --- 6-11/16" 5-9/32" 10-9/16"
3" 340FGXFGOC -carbonsteel 39.70 10-1/8" 5-3/4" 11-1/2"OS - stainless steel 39.70AL - aluminum 11.00 8-1/4" 6-5/8" 13-1/4"
4" 440FGXFG AL - aluminum --- 10-5/8" 7-9/16" 15-1/8"
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
2" 240TFXTFOC -carbonsteel --- --- --- ---OS - stainless steel ---AL - aluminum --- --- --- ---
3" 340TFXTFOC -carbonsteel --- --- --- ---OS - stainless steel ---AL - aluminum 7.3 8-1/4" 5-9/16" 11-1/8"
4" 440TFXTF AL - aluminum 17.0 10-5/8" 6-9/16" 13-1/8"
36 Dixon 877.963.4966
Double Plane O-Ring Style 50Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
1" 150FXF OC -carbonsteel 7.30 4-59/64" 2-3/16" 6-3/32"OS - stainless steel 7.30 5-59/64" 2-11/16" 7-19/32"
1½" 15050FXFOC -carbonsteel 9.00 7-11/16" 3-15/32" 8-29/32"OS - stainless steel 9.00AL - aluminum --- 6-1/8" 3" 7-11/16"
2" 250FXF
OC -carbonsteel --- 7-17/32" 3-1/4" 9-29/32"OS - stainless steel ---AL - aluminum 7.80
6-11/16" 2-7/8" 9-1/16"BR -brass 14.90MI -balleableiron 13.20
3" 350FXF
OC -carbonsteel 21.80 10-1/8" 4-13/16" 12-61/64"OS - stainless steel 21.80AL - aluminum 9.40 8-1/4" 3-7/8" 10-29/32"MI -malleableiron 21.50
4" 450FXF AL - aluminum 15.00 10-5/8" 4-3/4" 13-7/8"
O-ring Swivel Joints
37Dixon 877.963.4966
Double Plane O-Ring Style 50150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Size Part # Material Weight(lbs)
Dimensions(inches)
A B C
1" 150FGXFG OC -carbonsteel --- 4-59/64" 3-3/16" 9-19/64"OS - stainless steel --- 5-59/64" 3-11/16" 10-19/64"
1½" 15050FGXFGOC -carbonsteel --- 7-11/16" 4-11/16" 12-9/16"OS - stainless steel ---AL - aluminum --- 6-1/8" 5-11/32" 12-3/8"
2" 250FGXFGOC -carbonsteel --- 7-17/32" 4-1/2" 12-17/32"OS - stainless steel ---AL - aluminum --- 6-11/16" 5-9/32" 13-29/32"
3" 350FGXFGOC -carbonsteel --- 10-1/8" 5-3/4" 15-5/8"OS - stainless steel ---AL - aluminum --- 8-1/4" 6-15/32" 16-3/32"
4" 450FGXFG AL - aluminum --- 10-5/8" 7-19/32" 19-9/16"
38 Dixon 877.963.4966
Double Plane O-Ring Style 60Female NPT x Female NPT
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Size Part # Material Weight(lbs)
Dimensions(inches)
A
1" 160FXF OC -carbonsteel 7.00 4-13/32"OS - stainless steel --- 4-29/32"
1½" 15060FXFOC -carbonsteel --- 5-7/16"OS - stainless steel 7.70AL - aluminum --- 4-11/16"
2" 260FXF
OC -carbonsteel 12.30 6-21/32"OS - stainless steel 12.30AL - aluminum 6.90
6-7/32"BR -brass 14.30MI -balleableiron ---
3" 360FXF
OC -carbonsteel 19.40 8-9/64"OS - stainless steel ---AL - aluminum 8.60 7-1/32"MI -malleableiron 18.60
4" 460FXF AL - aluminum 13.40 9-1/8"
O-ring Swivel Joints
39Dixon 877.963.4966
Double Plane O-Ring Style 60150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Size Part # Material Weight(lbs)
Dimensions(inches)
A
1" 160FGXFG OC -carbonsteel --- 6-7/64"OS - stainless steel --- 6-39/64"
1½" 15060FGXFGOC -carbonsteel --- 7-7/8"OS - stainless steel ---AL - aluminum --- 7-1/32"
2" 260FGXFGOC -carbonsteel 24.90 8-1/32"OS - stainless steel 24.90AL - aluminum --- 8-5/8"
3" 360FGXFGOC -carbonsteel --- 9-7/8"OS - stainless steel ---AL - aluminum --- 9-5/8"
4" 460FGXFG AL - aluminum --- 11-31/32"
40 Dixon 877.963.4966
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Triple Plane O-Ring Style 70Female NPT x Female NPT
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
1" 170FXF OC -carbonsteel 7.60 4-59/64" 2-3/16"OS - stainless steel --- 5-59/64" 2-11/16"
1½" 15070FXFOC -carbonsteel --- 7-11/16" 3-15/32"OS - stainless steel ---AL - aluminum 3.80 6-1/8" 3"
2" 270FXF
OC -carbonsteel 16.40 7-17/32" 3-1/4"OS - stainless steel ---AL - aluminum 7.80
6-11/16" 2-7/8"BR -brass ---MI -balleableiron ---
3" 370FXFOC -carbonsteel --- 10-1/8" 4-13/16"OS - stainless steel ---AL - aluminum 10.10 8-1/4" 3-7/8"
4" 470FXF AL - aluminum 16.70 10-5/8" 4-3/4"
O-ring Swivel Joints
41Dixon 877.963.4966
Triple Plane O-Ring Style 70150# ASA Flange x 150# ASA Flange
Swivels are shipped standard with the following components: • Buna-N for pressure seals and dust seals • Carbon steelforballbearings
Size Part # Material Weight(lbs)
Dimensions(inches)
A B
1" 170FGXFG OC -carbonsteel --- 4-59/64" 3-3/16"OS - stainless steel --- 5-59/64"
1½" 15070FGXFGOC -carbonsteel --- 7-11/16" 4-11/16"OS - stainless steel ---AL - aluminum --- 6-1/8" 5-11/32"
2" 270FGXFGOC -carbonsteel --- 7-17/32" 4-1/2"OS - stainless steel ---AL - aluminum --- 6-11/16" 5-9/32"
3" 370FGXFGOC -carbonsteel --- 10-1/8" 5-3/4"OS - stainless steel ---AL - aluminum --- 8-1/4" 6-15/32"
4" 470FGXFG AL - aluminum --- 10-5/8" 7-19/32"
42 Dixon 877.963.4966
Corrosion Resistance of Coupling Material
Note: 1. Ratingsgivenarebasedat70°F.Chemicalcompatibilityvariesgreatlywithtemperature.Forapplicationsattemperaturesotherthan70°F,contactthefactoryforrecommendations.
2. Gasket/sealmaterialsarenotnecessarilylistedinorderofpreference.
3. Chemicalresistanceofamaterialdoesnotnecessarilyindicatethesuitabilityofafittinginagivenapplicationduetovariablessuchasimproperclampandcouplingapplication,special hose construction, gasket material, etc.
Ratings
1 - excellent2 - good3 - fairX - not recommended_-contactfactory
Metal
T - PTFEV-FKME-EPDM,EPRN-NeopreneB-BunaN
Gasket/SealMaterial
A-acceptableX - not recommended_-contactfactory
Non-Metal
CautionThefollowingdatahasbeencompiledfromgenerallyavailablesourcesand
shouldnotberelieduponwithoutconsultingandfollowingthespecificrecommendations of the manufacturer regarding particular coupling materials.
Special caution should be taken when handling hazardous materials.
Ratings given are based at 70°F
AGENT
Mal
leab
le Ir
onC
arbo
n St
eel
Alum
inum
Seal
Mat
eria
l
Stai
nles
s St
eel,
316
Bras
s
Swivel Joints
43Dixon 877.963.4966
113222211
22111--22-2
X232X
1X-
-2-X22XX-X-
X-X2X121-2XXX1-X22212
TT
TEVNBTEVNBTEVNBTEVNBTNBTE
TEVNB
TEVNBTVBTEVN
TETEVNB
--
TEVNBTENB
-TEVNB
TEVNBTEVNBTEVNBTEVNBTEVNB
TENBTENB
-
TEVBTEVNB
-TEVNBTEVNBTENBTEVNBTEVNB
TVTEVNB
TV
TEVNBTEVNBTEVNBTEVNBTEVNBTEVNB
TETV-
TVNTEVNBTEVNTEVNBTEVNBTEVNBTEVN
TVTVNB
TVT
TV
2XXXXX222
22222--22-2
XXXXX
11-
X2-X1XXXXX2
2-2X22X2-X-X2X---212X
X1XXXXX2X
22212--22-2
X-X2X
XX-
XX-XXXXXXX-
2222X222-2X-2X2X-2222
AcetateSolvents(Crude)AcetateSolvents(Pure)AceticAcid(80%)AceticAcid(50%)AceticAcid(20%)AceticAcid(10%)AceticAnhydrideAcetoneAcetyleneAlcoholsAmylAlcoholBenzylAlcoholButylAlcohol Diacetone AlcoholEthylAlcoholHexylAlcoholIsobutylAlcoholIsopropylAlcoholMethylAlcohol(Methanol)OctylAlcoholPropylAlcoholAluminumAluminumChloride(Aqu.)AluminumFluoride(Sat.)AluminumNitrate(Sat.)AluminumPotassiumSulfate(Alum)AluminumSulfate(Sat.)AmmoniaAmmoniaAnhydrous Ammonia GasAmmoniaNitrateAmmoniumAmmoniumBiflourideAmmoniumCarbonate(Sat.) Ammonium CasenateAmmoniumChloride(Sat.)AmmoniumHydroxide(Sat.)AmmoniumNitrateAmmoniumPhosphate(10-40%)AmmoniumSulfate(10-40%)AnilineArsenic AcidAsphaltBariumBariumCarbonate(Sat.)BariumChloride(Sat.)BariumHydroxide(Sat.) Barium SulfateBariumSulfideBeerBenzaldehydeBenzene, BenzolBenzineBenzoic AcidBlack LiquorBleach(12.5%ActiveChlorine)BoraxBoric AcidBrine AcidBromic acidBromine LiquidButadiene,ButyleneButaneButylAcetateButyricAcid
111111211
21122--22-1
X2222
11-
-2-X2-22122
2-222122-22X1---X2222
Ratings given are based at 70°F
AGENT
Mal
leab
le Ir
onC
arbo
n St
eel
Alum
inum
Seal
Mat
eria
l
Stai
nles
s St
eel,
316
Bras
s
44 Dixon 877.963.4966
Calcium Calcium BisulfateCalciumBisulfideCalciumBisulfite Calcium BromideCalciumCarbonateCalciumChloride(Sat.)CalciumHydroxide(Sat.)CalciumHypochlorite(Sat.)CarbonCarbonBisulfideCarbonDioxide(Dry)CarbonDioxide(Wet)CarbonDisulfideCarbonMonoxideCarbonTetrachlorideCarbonicAcidCastor OilCaustic PotashCellosolvesChlorine(Liquid)ChloroformChlorosulfonic AcidClorox(Bleach,5.5%CL)ChromicAcid(50%)Citric AcidCoke Oven GasCopper Copper ChlorideCopperCyanide Copper SulfateCrysylicAcid(Conc.)CyclohexaneDetergentsDextroseDiesel FuelsDiethylamineDisodium PhosphateEthersEthylEthylAcetateEthylChlorideEthyleneEthyleneChlorideEthyleneDichlorideEthyleneGlycolEthyleneOxideFattyAcidsFerric Ferric ChlorideFerricHydroxideFerricNitrate(10-50%) Ferric SulfateFerrousFerrousChloride(Sat.) Ferrous SulfateFluboricAcidFormaldehyde(50%)FormicAcid(Anhyd.)Freon Freon 11 Freon 12 Freon 22Fruit JuicesFuel Oil
TTVBTVNB
TTEVBTEVNBTEVNB
TEV
TVTENBTENB
TVTEVNB
TVTEVNBTEVNBTEVNB
TETVTVT
TEVBTVNBTEVNBTEVN
TEVNBTEVNBTEVNB
TEVTVB
TEVNBTEVNB
TVBTN
TEVTB
TTEVB
TVTV
TEVNBT
TVNB
TEVNBTEVNBTEVNBTEVNB
TEVNBTEVNBTEVNBTENTEVN
TVNBTVNBTN
TVNBTVNB
X-XXX-XX
11111X12X2---X232
XXX222212-2
--
--111
X-XX
X2X-1
22222
--X2222X
X1XX1-22-2--X-XX3
XXX222-1--2
--
-22X3
X-XX
X2-2X
22222
X-XX222X
22322222X22X2XXX2
X-X222-2X12
22
2222X
X-XX
-X1XX
XXXX2
222X2-22
22221-22223-X2--2
X22222-1211
21
-2221
X12-
X--1-
22222
Ratings given are based at 70°F
AGENT
Mal
leab
le Ir
onC
arbo
n St
eel
Alum
inum
Seal
Mat
eria
l
Stai
nles
s St
eel,
316
Bras
s
Swivel Joints
45Dixon 877.963.4966
2
2X22212-22XXXX2X
--X1X1-222322
XXXX222
2X22-2-
XXX12
X222-12X22
FurfuralGasolineRefinedGasoline Sour GasolineGelatinGlucoseGlueGlycerineGlycolsGreen LiquorHeptaneHexaneHydrobromicAcid(50%)HydrobromicAcid(20%)HydrochloricAcid(20%)HydrochloricAcid(38%)HydrocyanicAcidHydrofluosilicicAcid(10-50%)HydrogenHydrogenPeroxide(50%)HydrogenSulfide(Aqu.)HydrogenChloride(DryGas)HydrogenGasHypochlorousAcidIodineIsopropylEtherJetFuel(JP4,JP5)KeroseneKetonesLacticAcid(25%)LacticAcid(80%)Lard OilLead Lead Acetate Lead Chloride Lead SulfateLime SulphurLinoleic AcidLinseed OilLubricants(Oil)MagnesiumMagnesiumCarbonateMagnesiumChlorideMagnesiumHydroxideMagnesiumNitrateMagnesiumOxideMagnesiumSulfateMaleicAcidMercuricMercuricChlorideMercuricCyanideMercuryMethaneMethanolMethylMethylBromideMethylEthylKetoneMethylIsobutylKetoneMethylMethacrylateMethyleneChlorideMilkMineralOilMuriaticAcidNapthaleneNaptha
2
2222212-21XXXX22
-2-1XX2222--2
2222222
2-12-22
-2112
2222-12X12
2
22X2222222XXXX2X
X-2-XX-222XX3
X-XXX22
--22--X
XX222
222X222-22
2
2222212-22XXXXX2
X-21XX212222-
X--XX21
-X22--2
XXX12
-22-2X1-22
TEN
TVNBTVNBTEVNBTEVNBTEVNBTEVNBTEVNBTEVNBTVNBTVNBTEVTEV
TEVNBTEVNTEVNTEVNB
TEVTE
TEVNTEVNB
TEVTEV
TTV
TVNBT
TEVNTEVNTVB
TENBTVNBTEVNBTEVNTVBTVNBTVNB
TEVNBTEVNBTEVNBTEVNB
-TEVNB
TEV
TEVBTEVBTEVNBTEVNBTENB
TVTETTT
TEVNBTVNB
TVTV
TVB
Ratings given are based at 70°F
AGENT
Mal
leab
le Ir
onC
arbo
n St
eel
Alum
inum
Seal
Mat
eria
l
Stai
nles
s St
eel,
316
Bras
s
46 Dixon 877.963.4966
X-
XXX2
23222222222X232232
XXX2X
--X--------
22222-22-22222-22X2
-2
---2
22222222112X222-21
--112
222-1-1113-
-111-221-2212212212
XX
XXX2
2-22221123X-2322-1
XX-2X
--2--------
X22XX2X2X22212-22X2
XX
1XX1
222222222222222221
XX--1
--X--------
XXX2X2X1X12112-22X2
NickelNickelChlorideNickelSulfateNitricNitricAcid(100%)NitricAcid(50%)NitricAcid(30%)NitrobenzeneOils Castor Oil Coconut Oil Corn Oil Cotton Seed Oil Fuel Oil Linseed OilMineralOil Silicon Oil VegetableOilOleic AcidOleumOxalicAcid(Sat.)OxygenPalmiticAcid(Sat.)ParaffinPerchloroethylenePetrolatumPhenol(CarbolicAcid)Phosphoric AcidPhosphoricAcid(25-50%)PhosphoricAcid(50-85%)Photographic SolutionsPhthalicAnhydridePicric AcidPlating Solutions Brass Plating Solution Cadmium Plating SolutionChrome40%PlatingSolutionCopper(Cyanide)PlatingSolution Gold Plating SolutionIronPLatingSolution Lead Plating SolutionNickelPlatingSolution Silver Plating Solution Tin Plating Solution Zinc Plating SolutionPotassium Potassium AcetatePotassiumBicarbonate(30%)PotassiumCarbonate(50%)PotaasiumChlorate(30%)PotassiumChloride(30%)PotassiumChromate(30%)PotassiumCyanideSolution(30%)PotassiumDichromate(30%)PotassiumHydroxide(90%)PotassiumNitrate(80%)PotassiumPermanganate(20%)PotassiumSulfate(10%)PropanePropyleneGylcolPropyleneOxide(90%)PyridinePyrogallicAcidSilverNitrateSoap Solutions
TEVNBTEVNB
TVTVTVT
TEVNBTVBTVNBTVNBTVNBTVNBTVNBTEVBTVNB
TBTV
TEVTEVNB
TVBTVNB
TVTVNB
TV
TEVNTEVTVNBTEV
TEVNB
TEVNBTEVNBTEVNTEVNBTEVNBTEVBTEVNBTEVNBTEVNBTEVNBTEVNB
TEVBTEVNBTEVNBTEVNBTEVNBTEVBTEVNBTEVBTENBTEVNBTEVNTEVNB
TVBTVNB
TET
TVNBTEVNBTEVNB
Ratings given are based at 70°F
AGENT
Mal
leab
le Ir
onC
arbo
n St
eel
Alum
inum
Seal
Mat
eria
l
Stai
nles
s St
eel,
316
Bras
s
Swivel Joints
47Dixon 877.963.4966
Sodium Sodium AcetateSodiumBicarbonate(20%) Sodium BisulfateSodiumBisulfite Sodium BorateSodiumPerborate(10%)SodiumCarbonateSodiumChlorate(50%)SodiumCyanide Sodium DichromateSodiumHydroxide(70%)SodiumHydroxide(50%)SodiumHydroxide(30%)SodiumChloride(30%)SodiumHypochloriteSodiumMetaphosphateSodiumNitrate(40%)SodiumPerborate(10%)SodiumPeroxide(10%) Sodium Silicate Sodium SulfateSodiumSulfide(50%) Sodium ThiosulphateStannic ChlorideStannous ChlorideSteamStearic AcidStoddard's SolventSugarLiquors(Cane)SugarLiquors(Beet)Sulfate LiquorsSulfiteLiquorsSulfur ChlorideSulfurDioxide(Dry)Sulfur TrioxideSulfuricAcid(TO10%)SulfuricAcid(100%)Sulfurous AcidTannic AcidTanning LiquorsTartaric AcidTitanium TetrachlorideTolueneTetrahydrofuranTomato JuiceTrichloroethyleneTriethanolamineTriethylamineTrisodiumPhosphate(10%)TurpentineUrea(50%)UrineVinegarWaterAcid(Mine)Water(Distilled)Water(Sea)WhiskeyWhiteLiquor(Pulp)WineXyleneZinc Zinc Chloride ZincNitrate ZincSulfate(50%)
12XX22X2X2XXXXXX1221-X2XX-22112XX22XX2X1-X1X212-X22-2XX2X2X2
X-X
22-22X22XXXX22XX2XX22XXXX-3222XX-222X2---X1---X-2X--XX222-22
X-2
X32X322X223322XX222222XXX-32223XX12X2XX--211322-22222XXX2XX2
X-X
21--2222-22-1--21222122X--122122-22X--2112122-2211212-221212
221
TENTEVNBTEVNBTEVNBTEVNBTEVNBTEVNBTEVNBTEVNB
TETENBTENBTENBTEVNB
TEVTEVNBTENBTEVNBTEVNBTEVNBTEVNBTEVNBTEVNBTEVNBTEVNB
-TVNBTVB
TEVNBTEVNBTVNBTVNB
TVTE
TEVTEVNB
TVTV
TEVNBTVNBTVNB
TVTVB
TTEVNB
TVTEVNTVBTVNBTVB
TEVNBTEVNBTEVNTEVNBTEVNBTEVNBTEVNBTEVNBTEVNB
TV
TEVNBTEVNBTEVNB
© 2015 DVCC Printed in the USA SWLJNT115_web
®
Dixon, founded in 1916, is a premier manufacturer and supplier of hose couplings, valves, dry-disconnects, swivels, and other fluid transfer and control products. The company’s global reach includes a wide range of products for numerous industries including petroleum exploration, refining, transportation, chemical processing, food & beverage, steel, fire protection, construction, mining and manufacturing. Dixon’s strategic objective is to create solutions that make products safer, leak-free, longer lasting, and always available.
800 High Street, Chestertown, MD 21620
Fax: 800.283.4966
Dixon Valve
dixonvalve.com • Customer Service: 877.963.4966
FacebookCustomer Service