© 2013 UNIVERSITY OF PITTSBURGH Study Group 3 - High School Math (Algebra 1 & 2, Geometry) Welcome...
-
Upload
jonatan-hadden -
Category
Documents
-
view
215 -
download
0
Transcript of © 2013 UNIVERSITY OF PITTSBURGH Study Group 3 - High School Math (Algebra 1 & 2, Geometry) Welcome...
© 2013 UNIVERSITY OF PITTSBURGH
Study Group 3 - High School Math (Algebra 1 & 2, Geometry)
Welcome Back!
Let’s spend some quality time discussing what we learned from our Bridge to Practice exercises.
© 2013 UNIVERSITY OF PITTSBURGH
Let’s Go Over Bridge to Practice #2: Time to Reflect on Our LearningPart 1:
For Algebra 1, Using the Bike and Truck Task:
For Algebra 2, Using the Missing Function Task:
For Geometry, Using the Building a New Playground Task:
a. Choose the Content Standards from the relevant pages in your
module 2 handout (or view the standards on the following slides for
each subject area Alg 1: 6-9, Alg 2: 16-19, Geometry: 25-28)
b. Choose the Practice Standards students will have the opportunity
to use while solving this task and find evidence to support them.
© 2013 UNIVERSITY OF PITTSBURGH
For Algebra 1: Bike and Truck Task
A bicycle traveling at a steady rate and a truck are moving along a road in the same direction. The graph below shows their positions as a function of time. Let B(t) represent the bicycle’s distance and K(t) represent the truck’s distance.D
ista
nce
fro
m s
tart
of
roa
d (
in f
ee
t)
Time (in seconds)
© 2013 UNIVERSITY OF PITTSBURGH
For Algebra 1 - Bike and Truck Task
1. Label the graphs appropriately with B(t) and K(t). Explain how you made your decision.
2. Describe the movement of the truck. Explain how you used the values of B(t) and K(t) to make decisions about your description.
3. Which vehicle was first to reach 300 feet from the start of the road? How can you use the domain and/or range to determine which vehicle was the first to reach 300 feet? Explain your reasoning in words.
4. Jack claims that the average rate of change for both the bicycle and the truck was the same in the first 17 seconds of travel. Explain why you agree or disagree with Jack and why.
© 2013 UNIVERSITY OF PITTSBURGH
Algebra 1 - Reflecting on Our Learning
• Which CCSS for Mathematical Content did we discuss?
• Which CCSS for Mathematical Practice did you use when solving the task?
© 2013 UNIVERSITY OF PITTSBURGH
The CCSS for Mathematical ContentAlgebra 1 TaskCCSS Conceptual Category – Algebra
Creating Equations* (A–CED)
Create equations that describe numbers or relationships.
A-CED.A.1 Create equations and inequalities in one variable and use them to solve problems. Include equations arising from linear and quadratic functions, and simple rational and exponential functions.
A-CED.A.2 Create equations in two or more variables to represent relationships between quantities; graph equations on coordinate axes with labels and scales.
A-CED.A.3 Represent constraints by equations or inequalities, and by systems of equations and/or inequalities, and interpret solutions as viable or nonviable options in a modeling context. For example, represent inequalities describing nutritional and cost constraints on combinations of different foods.
A-CED.A.4 Rearrange formulas to highlight a quantity of interest, using the same reasoning as in solving equations. For example, rearrange Ohm’s law V = IR to highlight resistance R.
Common Core State Standards, 2010, p. 65, NGA Center/CCSSO
*Mathematical Modeling is a Standard for Mathematical Practice (MP4) and a Conceptual Category, and specific modeling standards appear throughout the high school standards indicated with a star (★). Where an entire domain is marked with a star, each standard in that domain is a modeling standard.
© 2013 UNIVERSITY OF PITTSBURGH
The CCSS for Mathematical ContentAlgebra 1 Task CCSS Conceptual Category – Algebra
Reasoning with Equations and Inequalities (A–REI)
Solve equations and inequalities in one variable.
A-REI.B.3 Solve linear equations and inequalities in one variable, including equations with coefficients represented by letters.
A-REI.B.4 Solve quadratic equations in one variable.
A-REI.B.4a Use the method of completing the square to transform any quadratic equation in x into an equation of the form (x – p)2 = q that has the same solutions. Derive the quadratic formula from this form.
A-REI.B.4b Solve quadratic equations by inspection (e.g., for x2 = 49), taking square roots, completing the square, the quadratic formula and factoring, as appropriate to the initial form of the equation. Recognize when the quadratic formula gives complex solutions and write them as a ± bi for real numbers a and b.
Common Core State Standards, 2010, p. 65, NGA Center/CCSSO
© 2013 UNIVERSITY OF PITTSBURGH
The CCSS for Mathematical ContentAlgebra 1 TaskCCSS Conceptual Category – Algebra
Reasoning with Equations and Inequalities (A–REI)Represent and solve equations and inequalities graphically.
A-REI.D.10 Understand that the graph of an equation in two variables is the set of all its solutions plotted in the coordinate plane, often forming a curve (which could be a line).
A-REI.D.11 Explain why the x-coordinates of the points where the graphs of the equations y = f(x) and y = g(x) intersect are the solutions of the equation f(x) = g(x); find the solutions approximately, e.g., using technology to graph the functions, make tables of values, or find successive approximations. Include cases where f(x) and/or g(x) are linear, polynomial, rational, absolute value, exponential, and logarithmic functions.★
A-REI.D.12 Graph the solutions to a linear inequality in two variables as a half-plane (excluding the boundary in the case of a strict inequality), and graph the solution set to a system of linear inequalities in two variables as the intersection of the corresponding half-planes.
★Mathematical Modeling is a Standard for Mathematical Practice (MP4) and a Conceptual Category, and specific modeling standards appear throughout the high school standards indicated with a star (★). Where an entire domain is marked with a star, each standard in that domain is a modeling standard.
Common Core State Standards, 2010, p. 65, NGA Center/CCSSO
© 2013 UNIVERSITY OF PITTSBURGH
The CCSS for Mathematical ContentAlgebra 1 TaskCCSS Conceptual Category – Functions
Interpreting Functions (F–IF)
Interpret functions that arise in applications in terms of the context.
F-IF.B.4 For a function that models a relationship between two quantities, interpret key features of graphs and tables in terms of the quantities, and sketch graphs showing key features given a verbal description of the relationship. Key features include: intercepts; intervals where the function is increasing, decreasing, positive, or negative; relative maximums and minimums; symmetries; end behavior; and periodicity.★
F-IF.B.5 Relate the domain of a function to its graph and, where applicable, to the quantitative relationship it describes. For example, if the function h(n) gives the number of person-hours it takes to assemble n engines in a factory, then the positive integers would be an appropriate domain for the function.★
F-IF.B.6 Calculate and interpret the average rate of change of a function (presented symbolically or as a table) over a specified interval. Estimate the rate of change from a graph.★
★Mathematical Modeling is a Standard for Mathematical Practice (MP4) and a Conceptual Category, and specific
modeling standards appear throughout the high school standards indicated with a star ( )★ . Where an entire domain is marked with a star, each standard in that domain is a modeling standard.Common Core State Standards, 2010, p. 69, NGA Center/CCSSO
© 2013 UNIVERSITY OF PITTSBURGH
For Algebra 1 Task:What standards for mathematical
practice made it possible for us to learn?1. Make sense of problems and persevere in solving
them.
2. Reason abstractly and quantitatively.
3. Construct viable arguments and critique the reasoning of others.
4. Model with mathematics.
5. Use appropriate tools strategically.
6. Attend to precision.
7. Look for and make use of structure.
8. Look for and express regularity in repeated reasoning. Common Core State Standards for Mathematics, 2010
© 2013 UNIVERSITY OF PITTSBURGH
Part 3 - Underlying Mathematical Ideas Related to the Lesson – For Algebra 1 (Essential Understandings)
• The language of change and rate of change (increasing, decreasing, constant, relative maximum or minimum) can be used to describe how two quantities vary together over a range of possible values.
• A rate of change describes how one variable quantity changes with respect to another – in other words, a rate of change describes the covariation between two variables (NCTM, EU 2b).
• The average rate of change is the change in the dependent variable over a specified interval in the domain. Linear functions are the only family of functions for which the average rate of change is the same on every interval in the domain.
© 2013 UNIVERSITY OF PITTSBURGH
Essential Understandings – Algebra 1 EU #1a: Functions are single-valued mappings from one set—the domain of the
function—to another—its range.
EU #1b: Functions apply to a wide range of situations. They do not have to be described by any specific expressions or follow a regular pattern. They apply to cases other than those of “continuous variation.” For example, sequences are functions.
EU #1c: The domain and range of functions do not have to be numbers. For example, 2-by-2 matrices can be viewed as representing functions whose domain and range are a two-dimensional vector space.
EU #2a: For functions that map real numbers to real numbers, certain patterns of covariation, or patterns in how two variables change together, indicate membership in a particular family of functions and determine the type of formula that the function has.
EU #2b: A rate of change describes how one variable quantity changes with respect to another—in other words, a rate of change describes the covariation between variables.
EU #2c: A function’s rate of change is one of the main characteristics that determine what kinds of real-world phenomena the function can model.
Cooney, T.J., Beckmann, S., & Lloyd, G.M., & Wilson, P.S. (2010). Developing essential understanding of functions for teaching mathematics in grades 9-12 (p. 8-10). Reston, VA: National Council of Teachers of Mathematics.
© 2013 UNIVERSITY OF PITTSBURGH
Essential Understandings – Algebra 1EU #3a: Members of a family of functions share the same type of rate of change.
This characteristic rate of change determines the kinds of real-world phenomena that the function can model.
EU #3c: Quadratic functions are characterized by a linear rate of change, so the rate of change of the rate of change (the second derivative) of a quadratic function is constant. Reasoning about the vertex form of a quadratic allows deducing that the quadratic has a maximum or minimum value and that if the zeroes of the quadratic are real, they are symmetric about the x-coordinate of the maximum or minimum point.
EU #5a: Functions can be represented in various ways, including through algebraic means (e.g., equations), graphs, word descriptions, and tables.
EU #5b: Changing the way that a function is represented (e.g., algebraically, with a graph, in words or with a table) does not change the function, although different representations highlight different characteristics, and some may only show part of the function.
EU #5c: Some representations of a function may be more useful than others, depending on the context.
EU #5d: Links between algebraic and graphical representations of functions are especially important in studying relationships and change.
Cooney, T.J., Beckmann, S., & Lloyd, G.M., & Wilson, P.S. (2010). Developing essential understanding of functions for teaching mathematics in grades 9-12 (p. 8-10). Reston, VA: National Council of Teachers of Mathematics.
© 2013 UNIVERSITY OF PITTSBURGH
For Algebra 2: Missing Function Task
If h(x) = f(x) · g(x), what can you determine about g(x) from the given table and graph? Explain your reasoning.
x f(x)-2 0-1 10 21 32 4
© 2013 UNIVERSITY OF PITTSBURGH
Algebra 2 - Reflecting on Our Learning
• Which CCSS for Mathematical Content did we discuss?
• Which CCSS for Mathematical Practice did you use when solving the task?
The CCSS for Mathematical Content – Alg 2 TaskCCSS Conceptual Category – Number and Quantity
The Real Number System (N-RN)
Extend the properties of exponents to rational exponents.
N-RN.A.1 Explain how the definition of the meaning of rational exponents follows from extending the properties of integer exponents to those values, allowing for a notation for radicals in terms of rational exponents. For example, we define 51/3 to be the cube root of 5 because we want (51/3)3 = 5(1/3)3 to hold, so (51/3)3 must equal 5.
N-RN.A.2 Rewrite expressions involving radicals and rational exponents using the properties of exponents.
Common Core State Standards, 2010, p. 60, NGA Center/CCSSO
The CCSS for Mathematical Content - Alg 2 Task CCSS Conceptual Category – Algebra
Seeing Structure in Expressions (A–SSE)
Write expressions in equivalent forms to solve problems.
A-SSE.B.3 Choose and produce an equivalent form of an expression to reveal and explain properties of the quantity represented by the expression.★
A-SSE.B.3c Use the properties of exponents to transform expressions for exponential functions. For example the expression 1.15t can be rewritten as (1.151/12)12t T 1.01212t to reveal the approximate equivalent monthly interest rate if the annual rate is 15%.
A-SSE.B.4 Derive the formula for the sum of a finite geometric series (when the common ratio is not 1), and use the formula to solve problems. For example, calculate mortgage payments.★
★ Mathematical Modeling is a Standard for Mathematical Practice (MP4) and a Conceptual Category, and specific modeling standards appear throughout the high school standards indicated with a star (★). Where an entire domain is marked with a star, each standard in that domain is a modeling standard.
Common Core State Standards, 2010, p. 64, NGA Center/CCSSO
The CCSS for Mathematical Content – Alg 2 TaskCCSS Conceptual Category – Algebra
Arithmetic with Polynomials and Rational Expressions (A–APR)
Understand the relationship between zeros and factors of polynomials.
A-APR.B.2 Know and apply the Remainder Theorem: For a polynomial p(x) and a number a, the remainder on division by x – a is p(a), so p(a) = 0 if and only if (x – a) is a factor of p(x).
A-APR.B.3 Identify zeros of polynomials when suitable factorizations are available, and use the zeros to construct a rough graph of the function defined by the polynomial.
Common Core State Standards, 2010, p. 64, NGA Center/CCSSO
The CCSS for Mathematical Content – Alg 2 TaskCCSS Conceptual Category – Functions
Building Functions (F–BF)
Build a function that models a relationship between two quantities.
F-BF.A.1 Write a function that describes a relationship between two quantities.★
F-BF.A.1a Determine an explicit expression, a recursive process, or steps for calculation from a context.
F-BF.A.1b Combine standard function types using arithmetic operations. For example, build a function that models the temperature of a cooling body by adding a constant function to a decaying exponential, and relate these functions to the model.
F-BF.A.2 Write arithmetic and geometric sequences both recursively and with an explicit formula, use them to model situations, and translate between the two forms.★
★Mathematical Modeling is a Standard for Mathematical Practice (MP4) and a Conceptual Category, and specific
modeling standards appear throughout the high school standards indicated with a star ( )★ . Where an entire domain is marked with a star, each standard in that domain is a modeling standard.
Common Core State Standards, 2010, p. 70, NGA Center/CCSSO
For Algebra 2 Task:What math practices made it possible for
us to learn?1. Make sense of problems and persevere in solving them.
2. Reason abstractly and quantitatively.
3. Construct viable arguments and critique the reasoning of others.
4. Model with mathematics.
5. Use appropriate tools strategically.
6. Attend to precision.
7. Look for and make use of structure.
8. Look for and express regularity in repeated reasoning.Common Core State Standards for Mathematics, 2010
© 2013 UNIVERSITY OF PITTSBURGH
Part 3 - Underlying Mathematical Ideas Related to the Lesson – For Algebra 2 (Essential Understandings)
• The product of two or more linear functions is a polynomial function. The resulting function will have the same x-intercepts as the original functions because the original functions are factors of the polynomial.
• Two or more polynomial functions can be multiplied using the algebraic representations by applying the distributive property and combining like terms.
• Two or more polynomial functions can be added using their graphs or tables of values because given two functions f(x) and g(x) and a specific x-value, x1, the point (x1, f(x1)+g(x1)) will be on the graph of the sum f(x)+g(x). (This is true for subtraction and multiplication as well.)
© 2013 UNIVERSITY OF PITTSBURGH
For Geometry:Building a New Playground Task
The City Planning Commission is considering building a new playground. They would like the playground to be equidistant from the two elementary schools, represented by points A and B in the coordinate grid that is shown.
© 2013 UNIVERSITY OF PITTSBURGH
For Geometry:Building a New Playground
PART A
1. Determine at least three possible locations for the park that are equidistant from points A and B. Explain how you know that all three possible locations are equidistant from the elementary schools.
2. Make a conjecture about the location of all points that are equidistant from A and B. Prove this conjecture.
PART B
3. The City Planning Commission is planning to build a third elementary school located at (8, -6) on the coordinate grid. Determine a location for the park that is equidistant from all three schools. Explain how you know that all three schools are equidistant from the park.
4. Describe a strategy for determining a point equidistant from any three points.
© 2013 UNIVERSITY OF PITTSBURGH
Geometry - Reflecting on Our Learning
• Which CCSS for Mathematical Content did we discuss?
• Which CCSS for Mathematical Practice did you use when solving the task?
© 2013 UNIVERSITY OF PITTSBURGH
The CCSS for Mathematical ContentCCSS Conceptual Category – Geometry
Congruence (G-CO)
Understand congruence in terms of rigid motions.
G-CO.B.6 Use geometric descriptions of rigid motions to transform figures and to predict the effect of a given rigid motion on a given figure; given two figures, use the definition of congruence in terms of rigid motions to decide if they are congruent.
G-CO.B.7 Use the definition of congruence in terms of rigid motions to show that two triangles are congruent if and only if corresponding pairs of sides and corresponding pairs of angles are congruent.
G-CO.B.8 Explain how the criteria for triangle congruence (ASA, SAS, and SSS) follow from the definition of congruence in terms of rigid motions.
Common Core State Standards, 2010, p. 76, NGA Center/CCSSO
© 2013 UNIVERSITY OF PITTSBURGH
The CCSS for Mathematical ContentCCSS Conceptual Category – Geometry
Congruence (G-CO)
Prove geometric theorems.
G-CO.C.9 Prove theorems about lines and angles. Theorems include: vertical angles are congruent; when a transversal crosses parallel lines, alternate interior angles are congruent and corresponding angles are congruent; points on a perpendicular bisector of a line segment are exactly those equidistant from the segment’s endpoints.
G-CO.C.10 Prove theorems about triangles. Theorems include: measures of interior angles of a triangle sum to 180°; base angles of isosceles triangles are congruent; the segment joining midpoints of two sides of a triangle is parallel to the third side and half the length; the medians of a triangle meet at a point.
G-CO.C.11 Prove theorems about parallelograms. Theorems include: opposite sides are congruent, opposite angles are congruent, the diagonals of a parallelogram bisect each other, and conversely, rectangles are parallelograms with congruent diagonals.
Common Core State Standards, 2010, p. 76, NGA Center/CCSSO
© 2013 UNIVERSITY OF PITTSBURGH
The CCSS for Mathematical ContentCCSS Conceptual Category – Geometry
Similarity, Right Triangles, and Trigonometry (G-SRT)
Define trigonometric ratios and solve problems involving right triangles.
G-SRT.C.6 Understand that by similarity, side ratios in right triangles are properties of the angles in the triangle, leading to definitions of trigonometric ratios for acute angles.
G-SRT.C.7 Explain and use the relationship between the sine and cosine of complementary angles.
G-SRT.C.8 Use trigonometric ratios and the Pythagorean Theorem to solve right triangles in applied problems.★
★Mathematical Modeling is a Standard for Mathematical Practice (MP4) and a Conceptual Category, and specific modeling
standards appear throughout the high school standards indicated with a star (★). Where an entire domain is marked with a star, each standard in that domain is a modeling standard.
Common Core State Standards, 2010, p. 77, NGA Center/CCSSO
© 2013 UNIVERSITY OF PITTSBURGH
The CCSS for Mathematical ContentCCSS Conceptual Category – Geometry
Expressing Geometric Properties with Equations (G-GPE)
Use coordinates to prove simple geometric theorems algebraically.
G-GPE.B.4 Use coordinates to prove simple geometric theorems algebraically. For example, prove or disprove that a figure defined by four given points in the coordinate plane is a rectangle; prove or disprove that the point (1, √3) lies on the circle centered at the origin and containing the point (0, 2).
G-GPE.B.5 Prove the slope criteria for parallel and perpendicular lines and use them to solve geometric problems (e.g., find the equation of a line parallel or perpendicular to a given line that passes through a given point).
G-GPE.B.6 Find the point on a directed line segment between two given points that partitions the segment in a given ratio.
G-GPE.B.7 Use coordinates to compute perimeters of polygons and areas of triangles and rectangles, e.g., using the distance formula.★
★Mathematical Modeling is a Standard for Mathematical Practice (MP4) and a Conceptual Category, and specific modeling
standards appear throughout the high school standards indicated with a star ( )★ . Where an entire domain is marked with a star, each standard in that domain is a modeling standard.
Common Core State Standards, 2010, p. 78, NGA Center/CCSSO
© 2013 UNIVERSITY OF PITTSBURGH
For Geometry Task:Which Standards for Mathematical
Practice made it possible for us to learn?1. Make sense of problems and persevere in solving
them.
2. Reason abstractly and quantitatively.
3. Construct viable arguments and critique the reasoning of others.
4. Model with mathematics.
5. Use appropriate tools strategically.
6. Attend to precision.
7. Look for and make use of structure.
8. Look for and express regularity in repeated reasoning. Common Core State Standards for Mathematics, 2010
© 2013 UNIVERSITY OF PITTSBURGH
Part 3 - Underlying Mathematical Ideas Related to the Lesson - For Geometry (Essential Understandings)
• Coordinate Geometry can be used to form and test conjectures about geometric properties of lines, angles and assorted polygons.
• Coordinate Geometry can be used to prove geometric theorems by replacing specific coordinates with variables, thereby showing that a relationship remains true regardless of the coordinates.
• The set of points that are equidistant from two points A and B lie on the perpendicular bisector of line segment AB, because every point on the perpendicular bisector can be used to construct two triangles that are congruent by reflection and/or Side-Angle-Side; corresponding parts of congruent triangles are congruent.
• It is sometimes necessary to prove both 'If A, then B' and 'If B, then A' in order to fully prove a theorem; this situation is referred to as an "if and only if" situation; notations for such situations include <=> and iff.
Part 2 - Research Connection: Findings by Tharp and GallimoreThis slide pertains to Alg 1, Alg 2, & Geometry
• For teaching to have occurred - Teachers must “be aware of the students’ ever-changing relationships to the subject matter.”
• They [teachers] can assist because, while the learning process is alive and unfolding, they see and feel the student's progression through the zone, as well as the stumbles and errors that call for support.
• For the development of thinking skills—the [students’] ability to form, express, and exchange ideas in speech and writing—the critical form of assisting learners is dialogue -- the questioning and sharing of ideas and knowledge that happen in conversation. Tharp & Gallimore, 1991
© 2013 UNIVERSITY OF PITTSBURGH
End of review of Bridge to Practice #2
Now we will move into our new Study Group Module 3 which is divided into two parts:1. The impact of teacher implementation of a high level
task on student learning
2. Using assessing and advancing questions to support student learning
© 2013 UNIVERSITY OF PITTSBURGH
Supporting Rigorous Mathematics Teaching and Learning
Part 1
Enacting Instructional Tasks:
Maintaining the Demands of the Tasks
Tennessee Department of Education
High School Mathematics
© 2013 UNIVERSITY OF PITTSBURGH
Using the Assessment to Think About Instruction
In order for students to perform well on the Constructed
Response Assessments (CRAs), what are the
implications for instruction?
• What kinds of instructional tasks will need to be
used in the classroom?
• What will teaching and learning look like and sound
like in the classroom?
© 2013 UNIVERSITY OF PITTSBURGH
Rationale
Effective teaching requires being able to support
students as they work on challenging tasks without
taking over the process of thinking for them
(NCTM, 2000). By analyzing the classroom actions
and interactions of six teachers enacting the same
high-level task, teachers will begin to identify
classroom-based factors that are associated with
supporting or inhibiting students’ high-level
engagement during instruction.
© 2013 UNIVERSITY OF PITTSBURGH
Session GoalsParticipants will:
• learn about characteristics of the written task that impact
students’ opportunities to think and reason about
mathematics
• learn about the factors of implementation that contribute
to the maintenance and decline of thinking and reasoning
• analyze student work to determine what students know
and can do
• develop assessing and advancing questions based on
student work (this will be part of the Bridge to Practice #3)
© 2013 UNIVERSITY OF PITTSBURGH
The Mathematical Tasks Framework
TASKS
as they appear in curricular/ instructional materials
TASKS
as set up by the teachers
TASKS
as implemented by students
Student Learning
Stein M. K., Smith, M. S., Henningsen, M. A., & Silver, E. A. (2000). Implementing standards-based mathematics instruction: A casebook for professional development, p. 4. New York: Teachers College Press.
© 2013 UNIVERSITY OF PITTSBURGH
The Enactment of the Task(Private Think Time)
• Read the vignettes.
• Consider the following question:
What are students learning in each classroom?
Scenario A – Mrs. Fox
Scenario B – Mr. Chambers
Scenario C – Ms. Fagan
Scenario D – Ms. Jackson
Scenario E – Mr. Cooper
Scenario F – Ms. Gorman
© 2013 UNIVERSITY OF PITTSBURGH
The Enactment of the Task(Small Group Discussion)
Discuss the following questions and cite evidence from
the cases:
What are students learning in each classroom?
What made it possible for them to learn?
© 2013 UNIVERSITY OF PITTSBURGH
The Enactment of the Task(Whole Group Discussion)
What opportunities did students have to think and reason in each of the classes?
© 2013 UNIVERSITY OF PITTSBURGH
Research Findings:
The Fate of Tasks
TASKS
as they appear in curricular/ instructional materials
TASKS
as set up by the teachers
TASKS
as implemented by students
Student Learning
© 2013 UNIVERSITY OF PITTSBURGH
Linking to Research/Literature: The QUASAR Project
How High-Level Tasks Can Evolve During a Lesson:
• Maintenance of high-level demands.
• Decline into procedures without connection to meaning.
• Decline into unsystematic and nonproductive exploration.
• Decline into no mathematical activity.
© 2013 UNIVERSITY OF PITTSBURGH
Factors Associated with the Maintenance and Decline of High-Level Cognitive Demands
Decline• Problematic aspects of the
task become routinized.• Understanding shifts to
correctness, completeness.• Insufficient time to wrestle
with the demanding aspects of the task.
• Classroom management problems.
• Inappropriate task for a given group of students.
• Accountability for high-level products or processes not expected.
© 2013 UNIVERSITY OF PITTSBURGH
Factors Associated with the Maintenance and Decline of High-Level Cognitive Demands
Maintenance• Scaffolds of student thinking
and reasoning provided.• A means by which students
can monitor their own progress is provided.
• High-level performance is modeled.
• A press for justifications, explanations through questioning and feedback.
• Tasks build on students’ prior knowledge.
• Frequent conceptual connections are made.
• Sufficient time to explore.
© 2013 UNIVERSITY OF PITTSBURGH
Linking to Research/Literature: The QUASAR Project
Stein & Lane, 1996
A.
B.
C.
High High
Low Low
High Low Moderate
Low
High
Task Set-Up Task Implementation Student Learning
© 2013 UNIVERSITY OF PITTSBURGH
Mathematical Tasks:A Critical Starting Point for Instruction
There is no decision that teachers make that has a
greater impact on students’ opportunities to learn and on
their perceptions about what mathematics is than the
selection or creation of the tasks with which the
teacher engages students in studying mathematics.
Lappan & Briars, 1995
© 2013 UNIVERSITY OF PITTSBURGH
Supporting Rigorous Mathematics Teaching and Learning
Tennessee Department of Education
High School Mathematics
Part 2
Illuminating Student Thinking: Assessing and
Advancing Questions
© 2013 UNIVERSITY OF PITTSBURGH
RationaleEffective teaching requires being able to support students as they work on challenging tasks without taking over the process of thinking for them (NCTM, 2000).
• Asking questions that assess student understanding of mathematical ideas, strategies or representations provides teachers with insights into what students know and can do.
• The insights gained from these questions prepare teachers to then ask questions that advance student understanding of mathematical ideas, strategies or connections to representations.
© 2013 UNIVERSITY OF PITTSBURGH
The Structures and Routines of a Lesson
The Explore Phase/Private Work Time
Generate Solutions
The Explore Phase/Small Group Problem Solving
1. Generate and Compare Solutions
2. Assess and Advance Student Learning
MONITOR: Teacher selects examples for the Share,
Discuss, and Analyze Phase based on:
• Different solution paths to the
same task
• Different representations
• Errors
• Misconceptions
SHARE: Students explain their methods, repeat others’
ideas, put ideas into their own words, add on to ideas
and ask for clarification.
REPEAT THE CYCLE FOR EACH
SOLUTION PATH
COMPARE: Students discuss similarities and
difference between solution paths.
FOCUS: Discuss the meaning of mathematical ideas in
each representation
REFLECT: By engaging students in a quick write or a
discussion of the process.
Set Up of the Task
Share, Discuss, and Analyze Phase of the Lesson
1. Share and Model
2. Compare Solutions
3. Focus the Discussion on
Key Mathematical Ideas
4. Engage in a Quick Write
© 2013 UNIVERSITY OF PITTSBURGH
Small Groups based on subject area(Algebra 1, Algebra 2, or Geometry)
Participants will:
• analyze given student work for their subject area to determine what the students know and what they can do based only on the evidence from student work
© 2013 UNIVERSITY OF PITTSBURGH
Bike and Truck Task – Algebra 1
A bicycle traveling at a steady rate and a truck are moving along a road in the same direction. The graph below shows their positions as a function of time. Let B(t) represent the bicycle’s distance and K(t) represent the truck’s distance.D
ista
nce
fro
m s
tart
of
roa
d (
in f
ee
t)
Time (in seconds)
© 2013 UNIVERSITY OF PITTSBURGH
Bike and Truck Task - Algebra 1
1. Label the graphs appropriately with B(t) and K(t). Explain how you made your decision.
2. Describe the movement of the truck. Explain how you used the values of B(t) and K(t) to make decisions about your description.
3. Which vehicle was first to reach 300 feet from the start of the road? How can you use the domain and/or range to determine which vehicle was the first to reach 300 feet? Explain your reasoning in words.
4. Jack claims that the average rate of change for both the bicycle and the truck was the same in the first 17 seconds of travel. Explain why you agree or disagree with Jack.
© 2013 UNIVERSITY OF PITTSBURGH
What Does Each Student Know?Algebra 1
Now we will focus on three pieces of student work.
Individually examine the three pieces of student work
A, B, and C for the Bike and Truck Task in your
participant handout.
What does each student know?
Be prepared to share and justify your conclusions.
Response A - Algebra 1
54
Response B - Algebra 1
55
Response C - Algebra 1
56
© 2013 UNIVERSITY OF PITTSBURGH
Missing Function Task – Algebra 2
If h(x) = f(x) · g(x), what can you determine about g(x) from the given table and graph? Explain your reasoning.
x f(x)-2 0-1 10 21 32 4
© 2013 UNIVERSITY OF PITTSBURGH
What Does Each Student Know?Algebra 2
Now we will focus on three pieces of student work.
Individually examine the three pieces of student work
A, B, and C for the Missing Function Task in your
Participant Handout.
What does each student know?
Be prepared to share and justify your conclusions.
Response A – Algebra 2
59
Response B – Algebra 2
60
Response C – Algebra 2
61
© 2013 UNIVERSITY OF PITTSBURGH
Building a New Playground Task -Geometry
The City Planning Commission is considering building a new playground. They would like the playground to be equidistant from the two elementary schools, represented by points A and B in the coordinate grid that is shown.
© 2013 UNIVERSITY OF PITTSBURGH
Building a New Playground - Geometry
PART A
1. Determine at least three possible locations for the park that are equidistant from points A and B. Explain how you know that all three possible locations are equidistant from the elementary schools.
2. Make a conjecture about the location of all points that are equidistant from A and B. Prove this conjecture.
PART B
3. The City Planning Commission is planning to build a third elementary school located at (8, -6) on the coordinate grid. Determine a location for the park that is equidistant from all three schools. Explain how you know that all three schools are equidistant from the park.
4. Describe a strategy for determining a point equidistant from any three points.
© 2013 UNIVERSITY OF PITTSBURGH
What Does Each Student Know?Geometry
Now we will focus on three pieces of student work.
Individually examine the three pieces of student work
A, B, and C for the Building a New Playground Task
in your Participant Handout.
What does each student know?
Be prepared to share and justify your conclusions.
Response A - Geometry
65
Response B - Geometry
66
Response C - Geometry
67
© 2013 UNIVERSITY OF PITTSBURGH
Group D - Cannot Get Started
Imagine that you are walking around the room, observing your students as they work on the task for either Algebra 1 or 2, or Geometry.
Group D has little or nothing on their papers.
Consider an assessing question and an advancing question for Group D. Be prepared to share and justify your conclusions.
Reminder: You cannot TELL Group D how to start. What questions can you ask them?
© 2013 UNIVERSITY OF PITTSBURGH
Before Beginning Bridge to Practice #3:
As you complete your next Bridge to Practice, reflect on
the Content Standards and Essential Understandings as
needed to help focus our discussion
• For Algebra 1, Using the Bike and Truck Task:
F-IF.B.4; F-IF.B.5; F-IF.B.6
• For Algebra 2, Using the Missing Function Task:
A-APR.A.1; A-APR (cluster); F-BF.A.1b
• For Geometry, Using the Building a New Playground Task:
G-GPE.B.4; G-GPE.B.5; G-GPE.B.6
a
© 2013 UNIVERSITY OF PITTSBURGH
Bridge to Practice #3
Part A:
Use the list developed of what the students know and what they can do from the Student Work A-D to develop questions to be asked during the Explore Phase of the lesson
– Develop at least one assessing question for Students A-D for your subject area
– Develop at least one advancing question for Students A-D for your subject area
© 2013 UNIVERSITY OF PITTSBURGH
Bridge to Practice #3
Part B:
Now that you have solved the task, examined some student work, and developed your assessing and advancing questions, facilitate this task with your students and record your assessing and advancing questions during the small group explore phase of the lesson.
Note: Record could be audio or video using a device such as your phone, or have a colleague script your questions for you.
Come prepared to share the questioning from your lesson.