© 2011 Autodesk The Interior Side of Revit: Documenting Interior Design Projects with Autodesk®...
-
Upload
vivian-bishop -
Category
Documents
-
view
213 -
download
0
Transcript of © 2011 Autodesk The Interior Side of Revit: Documenting Interior Design Projects with Autodesk®...
© 2011 Autodesk
The Interior Side of Revit: Documenting Interior Design Projects with Autodesk® Revit®Damian Serrano, Associate AIAProject/BIM Coordinator, RLF Inc.
Scott David Brown, AIAProject Coordinator / Director of Building Information Technology - HHCP
© 2011 Autodesk
Class Summary
Welcome!This class will answer many questions interior designers face when developing projects in Revit, including how to set up their models, how to document finishes, millwork, equipment, signage, etc.
© 2011 Autodesk
About the Speakers
Damian Serrano, Associate AIAProject/BIM Coordinator, RLF Inc.
Project/BIM Coordinator, RLF Inc. (Winter Park, FL) 20 years of experience in the AEC industry Revit Architecture Certified Professional Adjunct Professor, Seminole State College Adjunct Professor, Valencia College Architect, University of Buenos Aires
© 2011 Autodesk
About the Speakers
Scott D. Brown, AIADirector of Building Information Technology / Project Coordinator, HHCP
Licensed Architect, State of Colorado 15 Years of Project Experience Revit Early Adopter – Revit 1.0 Speaker Autodesk University 2004 - 2010 Speaker Nov. 2010 : Colegio De Arquitectos Y Arquitectos Paisajistas de Puerto Rico Co-Author - Revit 4.5 Basics – Architectural Modeling and Documentation , Schroff
Publishing , 2002
© 2011 Autodesk
Agenda
1 5 minIntroduction
Using Revit for Interior Design
2 10 minInterior Design Model Setup
What should and should not be included in an ID model
3 30 minDocumenting Finishes
Schedule based vs. model based
4 30 minMillwork, Equipment, Furniture & Signage
Strategies and Procedures
5 10 minMaterials and Rendering
Examples and Tips
© 2011 Autodesk
Learning Objectives
At the end of this class, you will be able to: Set up interior design models in different
collaboration scenarios Use key schedules to assign finish information to
rooms (color, model, etc.) and set up finish schedules
Create floor patterns, wall finish floor plans and elevations leveraging model information
Define strategies for modeling and coordination of Equipment, Furniture and Signage packages
© 2011 Autodesk
Introduction
It is said that Revit is not a user friendly for interior designersOur ID departments have embraced BIM and producing great results
© 2011 Autodesk
Introduction
Two main ID packages: Structural Interior Design (SID), includes finish selection and
documentation, floor finish plans, wall finish plans, interior elevations, millwork elevations/details and signage
Comprehensive Interior Design (CID), includes selection and placement of furniture and artwork, coordination with medical equipment
© 2011 Autodesk
Model Setup
Key to work efficiently, wrong decisions impact the whole project Single Revit model for small projects Multiple models for most of our projects ID/EQ model
© 2011 Autodesk
Model Setup
Using Spaces (instead of Rooms) Originally developed for Revit MEP Creation and behavior same as rooms Revit MEP not required (but helpful sometimes)
© 2011 Autodesk
Documenting Finishes
Two ways to document finishes: Room based: rooms contain finish information in parameters, shown in
schedule format Model based: finishes are modeled and identified in floor plans and
elevations Unfortunately, these two methods do not talk to each other Pick one, the other, or both
© 2011 Autodesk
Schedule Based Finishes
Room finishes in parameters of rooms or spaces Floor, base, wall (north, south, east and west), and ceiling Values assigned from key schedules which contain all the
information about the finish (manufacturer, color, style, size, etc.)
© 2011 Autodesk
Model Based Finishes
In our experience a best Revit practice is to “model it as it would really be built”
The industry moves toward a “true BIM” deliverable This approach is very valuable to utilize, not to mention the benefits of
accurate quantities, render ready models, etc.
© 2011 Autodesk
Floor Finish Floor Plans
Show patterns in any room with more than one finish If a room has only one finish, it is covered by the finish schedule Model floor finishes using the floor tool (true thickness, material, etc.) Visibility control for other disciplines linking our model
© 2011 Autodesk
Wall Finish Floor Plans
If a room has only one finish, it is covered by the finish schedule, otherwise additional information on floor plans
Model wall finishes using the wall tool (true thickness, material, etc.) Wall finish brackets to identify multiple wall finishes in a room Brackets family can be stretched, flipped and rotated Finish noted with a wall tag
© 2011 Autodesk
Interior Elevations
Leverage the model wall finishes Interior elevations show material and color transitions on walls with multiple
finishes Wall finishes are modeled with the wall tool if they have a significant
thickness, i.e. tile, stone, wall panel systems, etc. They are assigned materials that can be tagged in the elevations
© 2011 Autodesk
Millwork Elevations
Show the front, side and back appearance of any piece of custom millwork Millwork represented with 3D families Families are specific to each project and created with parametric dimensions
if needed Finishes and materials assigned to the geometry so we can schedule and tag
© 2011 Autodesk
Millwork Details
Millwork details are drawn using drafting views with detail components Detail component families have assigned a keynote value to tag them Keynote value (condoc) creates a reference to the specifications Drafting views are referenced from section markers in the elevations with the
option “Reference other view”
© 2011 Autodesk
Signage
Signage package may have its own model depending on the project size Includes sign location plans, sign elevations and schedules We have developed a fully parametric 3D exterior and interior signage library
© 2011 Autodesk
Signage
Parameters for messages, numbers, pictogram symbols, arrows, etc. Signs can report the room they belong to or the room adjacent (corridor case) Parametric dimensions for mounting height, distance from door frame, offset
from walls, etc. Customized to the client’s preference for look and functionality
© 2011 Autodesk
Signage
Signage models exported to Navisworks Navigate the project, generate walkthroughs and animations Great tool to verify sign locations, messages and directions Navisworks walkthroughs can be shared through a video portal like Vimeo Sample at http://vimeo.com/user5667300/videos
© 2011 Autodesk
Furniture and Artwork
CID packages occur simultaneously or after the SID package CID includes furniture/artwork plans, procurement sheets, cost estimate and
room by room lists Furniture and artwork placed in its own workset for model opening purposes On larger projects, furniture and artwork may have their own model We place every piece of furniture and artwork in the model Elements are scheduled and exported in database format to be compiled in
MS Access
© 2011 Autodesk
Furniture and Artwork
Our library includes both 2D and 3D versions of the furniture families Families include parameters for identification number (called JSN in
government projects), logistic category, specification section, etc. Created to match the specific furniture chosen for the space Document production uses the 2D version 3D version is used for coordination with Navisworks and presentation
purposes
© 2011 Autodesk
Conclusion
Revit has made our ID CD production more efficient and with better quality Ability to leverage the 3D capabilities to visualize the end product Render images to near photo quality for presentation and team discussion Materials and finishes are represented accurately and easy to change globally BIM is not the way of the future, it is the present Provide our clienta with a more coherent, cohesive and realistic output
© 2011 Autodesk
Contact Information
Damian Serrano, Associate AIA
Google Voice +1-407-490-2865
Email [email protected]
Scott D. Brown, AIA
Email [email protected]
© 2011 Autodesk
Q&A
Thanks!
Damian & Scott
© 2011 Autodesk
Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2011 Autodesk, Inc. All rights reserved.