לימבורג 2009

The LIMBURG Catalogue is a working document for all light planners and

designers. It provides information on technical and lighting data for well over

2000 luminaires, their possible areas of application as well as their constructive

and design qualities.

The Catalogue of Luminaires 58 is published in:

English, German, French, Dutch, Italian and Spanish.

It replaces the Catalogue of Luminaires 57 which is no longer valid.

GLASHÜTTE LIMBURG

PO Box 1463 · D-65534 Limburg

Glashüttenweg · D-65549 Limburg

Germany

Telephone + 49 6431 204-0

Telefax + 49 6431 204-103

e-mail [email protected]

www.glashuette-limburg.com

Catalogue of Luminaires 58 · 2008 - 2010

2

42 48 503836

72 74 74706664

58 62

908684

76

8882 92

100

138136132 134128124122120

140 144142 154 156 158150148 152

161158 168166165163161 171

173172 182 183179178176175 176

68

102 104 106 118

126 130

146

44

78 80

14 16 2624222018 28 30 32 34

112110

54

96

40 52

116 116114

Ceiling and wall luminaires

Recessed wall luminaires Recessed ceiling luminaires

Ceiling luminaires

Wall luminaires

3

194 196192190188186185 187

212 216214

301300

289288

294

286 290

293 296 298297

284 285

292

280 282

266

236

248

222

242

260

238 244

262

232

254

268

228

252250

230224218 220

308

240 246

256 258

272270

258

273 276 277274

226

263

278

264

200 202 204 206 210208198

295

302

r1

306

Wall luminaires

Accessories Lighting technology

Lamp table Table of contents

General conditions of sale

Table lamps Floor lamps

Pendant luminaires Downlights

4

About us and this catalogue

GLASHÜTTE LIMBURG is part of a group of companies which includes BEGA and BOOM.

These are medium-sized family companies, managed by the same owners. All the companies

in the group manufacture high-quality luminaires, each specialising in its own particular field.

GLASHÜTTE LIMBURG is based in »Limburg an der Lahn«.

Meandering lanes, steep flights of steps and historic half-timbered houses are distinctive features of

Limburg. Its landmark is the Cathedral which stands majestically above the town. Built in 1206,

St. George’s Cathedral is considered to be one of the masterpieces of the Rhineland’s late Romantic

period.

Limburg is one of the few towns where the medieval buildings are almost intact. Many half-timbered

houses originating from the 13th to 18th century were restored with great care and appropriately used.

Our trademark bears the town’s name, and underlines our commitment to an exacting approach

towards our architecture and the development of our products.

We specialise in interior luminaires made of glass. Our collection comprises of over 2000 models that

are unique in the world – luminaires for all areas of interior architecture to solve design and lighting tasks

in public and private areas.

5

We design, develop and construct our products with great care. A team of designers, glass

specialists, design engineers and lighting technicians work together to produce a long-lasting

product of high quality and good design to serve architecture.

At a time of declining product quality and increased mass production, high-quality

workmanship and long-lasting design are an expression of good taste.

This catalogue is a comprehensive overview of our programme.

Our designers have created it to reflect the design, quality and ease of use of our luminaires,

but only the actual products themselves can demonstrate this to perfection.

The good design and constructive quality of our luminaires has received international

recognition for over 40 years.

The luminaire programme is sold through specialised dealers and the electrical trade at

home and abroad.

GLASHÜTTE LIMBURG is the partner of all light planners and designers.

A reliable and efficient supplier of dealers and the trade.

6

We have developed and produced luminaires for many areas of interior architecture for over four

decades. The fascination of glass and its countless aspects have inspired our development and

design work.

Being able to consult our own glass production has always been a great advantage in realising new

ideas. The specialist know-how of our glassmakers and mould designers in their traditional crafts

allows us great freedom in our work.

We can design our luminaire glass to meet our own quality and lighting requirements without having

to rely on interchangeable products.

The resulting competence is reflected in the processing of the glass, metal production and

lighting technology. We have developed many of the production processes required by our

products in-house. This know-how and longstanding experience define our daily approach to the

development of new product ideas and new luminaires.

Product and quality

7

As a building detail, our products are closely connected with architecture. Continuous further

development in this area increasingly requires new lighting solutions. It is our task to recognise

these changes and use the potential they provide when developing new luminaires. The aim of

our products is to help solve lighting tasks.

We supply almost all our luminaires in different sizes, material finishes and with different technical

equipment. This means we can easily meet the most diverse requirements in planning work with

respect to illumination, dimension and material.

Apart from the design and lighting quality of our luminaires, we believe meticulous design and

the intelligent use of all materials are a special priority. Part of our corporate philosophy is to

consider every single detail with the same care as the product as a whole. This produces a

lasting investment that is still timeless in terms of technology and design even decades later.

8

Materials and surface finishes

Apart from manufacturing glass, an important part of the production process is the manufacture

of metal parts and their surface treatment.

Each metal is treated according to its characteristics so that the surface finish reflects the natural

character of the material. To meet the highest requirements of quality, every part is processed by

hand. We supply the metal parts of our luminaires in different metals or different surface finishes.

The corresponding materials are given on the relevant pages of the catalogue.

The following surface finishes are available: matt and polished stainless steel, matt and polished

aluminium, matt and polished brass, chrome and 24 carat gold. Luminaire parts with these surface

finishes are either manufactured from the corresponding material or galvanised. Information on

luminaire material is given in the luminaire description on the respective page of the catalogue.

9

We use the term – stainless steel surface finish – for galvanised luminaire parts.

The surface finish – polished chrome – stands for a galvanic process which produces a surface finish

very similar to a chrome surface finish. However, it is a shade darker, and in our opinion, the effect is

all the more exquisite.

Due to the vast number of individual parts, it is not always possible to provide precise details on

all the materials in the catalogue. However, if you need this information for a luminaire, we will be

pleased to give you the exact material specifications.

Apart from metallic surface finishes, many luminaires are also available with enamelled metal surface

finishes e.g. in the colours white RAL 9010, light grey RAL 7035 or white aluminium RAL 9006.

These metal surfaces are primed after pre-treatment, and then covered with high-quality enamel.

Depending on the material of the luminaire parts, we can also supply the luminaires to special order

in other surface finishes and colours. Please use the RAL table for any queries about colour.

10

Our art of making glass · Three-ply opal glass

Sand – Nature has provided us with sand in inexhaustible abundance.

Glass is molten sand. Pure and natural, it can be returned to nature in its entirety or also recycled as

often as desired.

We do not know exactly when glass was first made. The earliest finds date back to 7000 BC. We

only know that the oldest production of glass was closely connected with pottery. A chance product

created due to the too intense heat in the kilns causing the limey sand and soda to combine as a

coloured glaze on the ceramics. It was only possible to produce glass without the ceramic base in

1500 BC.

The hardness, durability and colour of glass have inspired the creative spirit of man like no other

material. And there is no other material which has been so closely linked to our culture for so long

like glass. Pure and timeless, durable and beautiful, glass has accompanied man through the ages

since time immemorial, and has decisively enriched life.

We have mastered the art of melting high-quality glass from sand and various additives. Our melting

furnaces have a temperature of more than 1500 °C. Due to the aggressiveness of the glass, our

melting tanks last some 3 to 5 years, and are then renewed.

11

The raw materials react during the melting process and decompose into a molten substance which

is mixed almost completely and degassed. The glass, liquid like honey, flows through a bottom

channel, the throat, from the melting furnace into the working end where it cools down to about

1200 °C and becomes viscous. And now the glassmakers can begin their work.

A speciality of GLASHÜTTE LIMBURG is the three-ply cased opal glass. The first stage in the

production of this valuable glass involves removing the hot viscous glass from the crystal glass

furnace. The post maker plunges his blowing iron with precision about 2 - 3 cm into the glass bath,

and at the same time with turning movements winds a specific quantity of the viscous glass around

the nose of the blowing iron. The blowing iron is withdrawn from the glass bath, separating the first

glass post from the glass bath.

This somewhat shapeless glass mass is evened out around the axis of the blowing iron by turning

and simultaneously pressing down with rotationally symmetrical movements on a roller plate to

ensure that no uneven wall thicknesses are created during later processing. To blow this solid tough

glass mass into a post, air is pressed into the blowing iron and the post maker seals the end of the

iron immediately with his thumb. The warmed air expands but is prevented from escaping, and

presses into the soft workable glass.

12

The post maker blows a small amount of air into the blowing iron with his mouth and the raw glass expands, reduces

its wall thickness, cools down rapidly to about 600 °C and solidifies. During the cooling period, the blowing iron with

its attached glass post is carried by the post carrier to the adjacent opal glass tank. Here the »caser« takes over the

blowing iron with the post.

He very skillfully plunges the blowing iron with the post again a few centimetres into the opal glass. With constant

rotations, he »winds« the opal glass around the crystal glass post and ensures that the glass is uniformly distributed.

With ever faster rotations, he withdraws the blowing iron from the glass bath, tears off the glass filament and blocks

the cased post in a wet wooden shaping block into a uniformly round shape. During this phase, the glass passes

through a temperature range of 840 °C and tarnishes white. Carefully turning the iron, the post carrier carries it back

with the glass to the crystal glass furnace.

After a brief cooling period, he can hand over the »half-finished glass piece« to the glassmaker who now has to take

the final amount of glass from the tank which is determined by the prescribed shape of the glass. It can range from

2 -15 kg of glass, depending on the size of the glass shape. Too much glass causes problems in wall thickness, too

little glass leads to problems in the stability of the glass product.

Our art of making glass · Three-ply opal glass

13

Square or asymmetrical shapes require very special precision when the glass is withdrawn.

Once removed, the glass post is blocked again in a much larger wet shaping block, evened out and

accordingly »adjusted« to its final shape. This is the moment where skilful craftsmanship and highest

concentration are required as this process has to be completed in just a few seconds. The hot, still

workable glass is set in an iron mould which is closed and bolted by the mould operating assistant.

At the same time, by pressure of breath or pneumatic air, the glassmaker blows the glass. When

the glass touches the walls of the cast iron mould, it cools down very quickly to about 600 °C and

solidifies. The mould is unbolted and the glass removed still fused to the blowing iron.

To separate the glass from the blowing iron, a few drops of water are trickled onto the link where

glass and metal meet using a wooden stick. The water hisses where the drops fall and chills the hot

glass. Small cracks suddenly appear on the glass surface.

They are sufficient to separate the glass precisely in this area from the blowing iron with one slight

knock. This concludes the manufacturing and forming process of the raw glass.

14

m

lx

1 2 3 4 5

1

0

1

2

2

5 2 1 0,5

m

lx

1 2 3 4 5

1

0

1

2

2

10 4 2 1

m

lx

1 2 3 4 5

1

0

1

2

2

16 8 4 2

m

lx

2 4 6 8 10

1

0

1

4

4

10 4 2 1 0,5 0,2

m

lx

1 2 3 4 5

1

0

1

2

2

10 4 2 1 0,2

m

lx

1 2 3 4 5

1

0

1

2

2

16 8 4 2 1

m

lx

2 4 6 8 10

2

0

2

4

4

10 4 2 1 0,5

m

lx

2 4 6 8 10

2

0

2

4

4

10 4 2 1 0,5

IP 65

m

lx

0,5 1 1,5 2 2,5

0,5

0

0,5

1

1

8756 · 87572 LED 3 W

H = 0,5 m

2 1 0,5 0,2

m

lx

0,5 1 1,5 2 2,5

0,5

0

0,5

1

1

8116 · 79641 QT 9-tr 10 W

H = 0,5 m

8 4 2 1 0,5

Recessed luminaires in five sizes. Luminaires with shallow recessed depths and a patented mounting system

– European Patent EP 06 86 806 – for easy and economic installation. The different dimensions and light outputs allow

a host of lighting tasks to be solved.

Recessed wall luminaires to illuminate rooms, stairways and halls – wherever shallow projection, high light output and

robustness are required. Dust-proof and jet-proof luminaires for use in rooms with a high level of dust or in wet rooms

e.g. bathrooms.

The light-diffusing texture on the sides of the crystal glass also distributes the light onto the mounting surface of the

luminaires. This produces an effective, additional level of light, and therefore a distinctly higher level of illumination in the

room. The luminaires for fluorescent lamps TC-TELI are equipped with electronic ballasts. Luminaires for a maximum

wattage of 42 W can also be operated at 32 W or 26 W, and luminaires for 32 W also at 26 W. All important technical

data are given in the instructions for use for these luminaires.

Recessed wall luminaires · Recessed depth 90 -110 mm 40 - 4800 lumen · Protection class IP 65

15

A

C

B A B

C

A

C

B A B

C

80 190150 250 300

Recessed wall luminaires with LED or for low voltage halogen lamps, general service lamps and fluorescent lamps Protection class IP 65 8756 · 8757 · 8116 · 7964 Safety class III 3

Crystal glass with light-diffusing texture, inside white

Die-cast aluminium luminaire housing and fixing frame Surface finish of fixing frame options • white aluminium enamel RAL 9006 • white enamel RAL 9010

8756 · 8757 with LEDs 24 V DC – colour temperature 3300 K – for separate power supply unit Technical data, page 301

8116 · 7964 without transformer

With 2 cable entries for through-wiring 8756 · 8757 · 8116 · 7964 1 cable entry

The luminaires for fluorescent lamps are fitted with the required ballasts.

8169 · 8167 · 8339 · 8337 with built-in electronic ballast

When preparing recessed openings, it may be practical to use an installation housing. Installation housings made of aluminium and glass-fibre reinforced plastic with 2 cable entries are given in the table. When installing luminaires in brickwork or concrete walls that are subsequently plastered, it may be practical to use the fixing frames listed in the table as well. Installation housings and fixing frames are accessories and must be ordered separately.

B · C = recessed dimensions

white aluminium

white

lamp

lumen

A

B

C

8756 8757 2 LED 3 W 40 80 90 705096 power supply unit for 8756 · 8757

8116 7964 1 QT 9-tr 10 W 130 80 90 708117 7965 1 D 45 40 W 400 150 110 1398118 7966 1 A 60 60 W 710 190 110 1758168 8166 1 A 60 75 W 935 250 110 2308338 8336 2 A 60 60 W 1420 300 110 280

8119 8109 1 TC-T 13 W 900 150 110 1398120 8110 1 TC-T 18 W 1200 190 110 1758169 8167 1 TC-TELI 42 W 3200 250 110 2308339 8337 2 TC-TELI 32 W 4800 300 110 280

installation housings

A

B

C

fixing frames

5062 120 110 90 5070

5062 120 110 90 50705064 190 125 165 50715066 225 125 205 50725068 280 125 255 50735087 330 125 305 5088

5064 190 125 165 50715066 225 125 205 50725068 280 125 255 50735087 330 125 305 5088

16

m

lx

0,5 1 1,5 2 2,5

0,5

0

0,5

1

1

5 2 1 0,5

m

lx

1 2 3 4 5

1

0

1

2

2

5 2 1 0,5 0,3

m

lx

1 2 3 4 5

1

0

1

2

2

16 8 4 2 1

m

lx

2 4 6 8 10

2

0

2

4

4

10 4 2 1 0,5

m

lx

1 2 3 4 5

1

0

1

2

2

10 4 2 1 0,5

m

lx

1 2 3 4 5

1

0

1

2

2

20 10 5 3 1,5

m

lx

2 4 6 8 10

2

0

2

4

4

15 5 2 1 0,5

m

lx

0,5 1 1,5 2 2,5

0,5

0

0,5

1

1

2 1 0,5 0,2

IP 65

Recessed luminaires in four sizes. Luminaires with shallow recessed depths and a patented mounting system for easy

and economic installation. The different dimensions and light outputs allow a host of lighting tasks to be solved with

just one luminaire series.

Luminaires to illuminate rooms, stairways and halls – wherever shallow projection, high light output and robustness

are required. Dust-proof and jet-proof luminaires for use in rooms with a high level of dust or also in wet rooms e.g.

bathrooms.

The light-diffusing texture of the crystal glass also directs the light onto the mounting surface of the luminaires.

This produces effective, additional light, and therefore a distinctly higher level of illumination in the room.

The luminaires for fluorescent lamps TC-TELI are equipped with electronic ballasts. Luminaires for a maximum wattage

of 32 W can also be operated at 26 W. All important technical data are given in the instructions for use for these

luminaires.

Recessed wall and ceiling luminaires · Recessed depth 90 -115 mm 40 - 2400 lumen · Protection class IP 65

The mounting system of the luminaires – European Patent EP 06 86 806 – allows fast and convenient installation in an enclosed or hollow structure. We also supply matching installation housings and fixing frames to meet many other installation requirements.

17

A

C

B A B A

C

B A B

190 250 30080

Recessed wall and ceiling luminaires with LED or for low voltage halogen lamps, general service lamps and fluorescent lamps Protection class IP 65 8754 · 8755 · 8111 · 7959 Safety class III 3


Die-cast aluminium luminaire housing Frame ring options • stainless steel • die-cast aluminium with white enamel RAL 9010

8754 · 8755 with LEDs 24 V DC – colour temperature 3300 K – for separate power supply unit Technical data, page 301

8111 · 7959 without transformer



8312 · 8310 with built-in electronic ballast

When preparing recessed openings, it may be practical to use an installation housing. Aluminium installation housings with 2 cable entries are given in the table. When installing luminaires in brickwork or concrete walls and ceilings that are subsequently plastered, it may be practical to use the fixing frames listed in the table as well. Installation housings and fixing frames are accessories and must be ordered separately.


s/steel

white

lamp

lumen

A

B

C

8754 8755 2 LED 3 W 40 80 90 715096 power supply unit for 8754 · 8755

8111 7959 1 QT 9-tr 10 W 130 80 90 718113 7961 1 D 45 40 W 400 190 105 1758164 8162 1 A 60 60 W 710 250 105 2308311 8309 1 A 60 100 W 1340 300 115 280

8115 7963 1 TC-T 13 W 900 190 105 1758165 8163 1 TC-T 26 W 1800 250 105 2308312 8310 1 TC-TELI 32 W 2400 300 115 280


A

B

fixing frames

5063 80 107 5074

5063 80 107 50745067 185 135 50755069 245 135 50765078 295 135 5079

5067 185 135 50755069 245 135 50765078 295 135 5079

18

IP 44

Luminaires for installation in ceilings or walls. This series is characterised by high light

output, low projection and very shallow recessed depth. Available in four sizes with

different light outputs, these luminaires can adapt to the requirements of the room.

Their potential is further enhanced by their protection class IP 44.

An easy-to-operate mounting system allows fast, economical and convenient installation.

The hand-blown, three-ply opal glass distributes the light uniformly in the room and onto

the mounting surface.

Luminaires with a high level of visual comfort and illumination.

All important technical data are given in the instructions for use for these luminaires.

Recessed ceiling and wall luminaires · Recessed depth 85 -100 mm 460 - 6000 lumen · Protection class IP 44

The visible rim of the die-cast aluminium fitter is supplied either polished or in white enamel RAL 9010. The opal glass in the shape of a spherical segment also directs the light to the sides and increases the vertical illuminance.

19

A

B

C

230 320 410150

A

B

7982797979837980

30°

120cd/klm

79817978

30°

90cd/klm

87758776

30°

72cd/klm

Recessed ceiling and wall luminaires for halogen lamps and fluorescent lamps Protection class IP 44

Hand-blown opal glass with thread

Die-cast aluminium fitter Surface finish options • polished aluminium • white enamel RAL 9010

With 2 cable entries for through-wiring

Luminaires for fluorescent lamps with built-in electronic ballast

Installation housings are required when preparing recessed openings in solid ceilings and walls. Aluminium installation housings with 2 cable entries are given in the table. Installation housings are accessories and must be ordered separately.


polished aluminium

white

lamp

lumen

A

B

C

8775 8776 1 QT 14 40 W 460 150 85 142

7981 7978 1 TC-TELI 26 W 1750 230 100 2157982 7979 2 TC-TELI 26 W 3500 320 100 3057983 7980 2 T16 R 22 + 55 W 6000 410 100 395


A

B

5097 250 95

5060 330 1105061 420 1105059 510 110

20

8778

30°

72cd/klm

8779

30°

90cd/klm

8780

30°

72cd/klm

8781

30°

120cd/klm

IP 44

Luminaires for installation in ceilings or walls. This series is characterised by high light output and very shallow recessed

depth. Available in four sizes with different light outputs, these luminaires can adapt to the requirements of the room.

Their protection class IP 44 further enhances their potential use for many applications.

An easy-to-operate mounting system allows fast, economical and convenient installation.

The hand-blown, three-ply opal glass distributes the light uniformly in the room. The glass surface is flush with the

mounting surface. When illuminated, this produces an interesting contrast between luminaire and mounting surface.

The luminaires for fluorescent lamps are equipped with electronic ballasts. Luminaires for a maximum wattage of 32 W

can also be operated at 26 W.


Recessed ceiling and wall luminaires · Recessed depth 110 mm 460 - 4800 lumen · Protection class IP 44

21

245 340 430195

A

B

C

A

B


Hand-blown opal glass, satin matt with thread

Die-cast aluminium fitter Metal ceiling frame ring • white enamel RAL 9010




lamp

lumen

A

B

C

8778 1 QT 14 40 W 460 195 110 184

8779 1 TC-TELI 26 W 1750 245 110 2358780 1 TC-TELI 42 W 3200 340 110 3308781 2 TC-TELI 32 W 4800 430 110 415


A

B

5098 290 110

5099 350 1205100 445 1205101 535 120


22

8777

30°

72cd/klm

8785

30°

90cd/klm

8786

30°

72cd/klm

8787

30°

120cd/klm

IP 44

Luminaires for installation in ceilings or walls. They are essentially characterised

by high light output, low projection and very shallow recessed depth. Available

in four sizes with different light outputs, these luminaires can adapt to the

requirements of the room. Their protection class IP 44 further enhances their

potential use for many applications.

An easy-to-operate mounting system allows fast, economical and convenient

installation.

The hand-blown, three-ply opal glass covers the recessed opening and, despite

its very shallow projection, illuminates the room and mounting surface uniformly,

producing a »floating« effect.

The luminaires for fluorescent lamps are equipped with electronic ballasts.

Luminaires for a maximum wattage of 32 W can also be operated at 26 W.

All important technical data are given in the instructions for use for these

luminaires.

Recessed ceiling and wall luminaires Recessed depth 85 -100 mm 460 - 4800 lumen · Protection class IP 44

23

A

B

C

240 330 420155

A

B


Hand-blown opal glass, satin matt, with thread

Die-cast aluminium fitter





lamp

lumen

A

B

C

8777 1 QT 14 40 W 460 155 85 142



A

B

5097 250 95

5060 330 1105061 420 1105059 510 110

24

8928

30°

360cd/klm

8929

30°

360cd/klm

Recessed ceiling luminaires with dual lighting technology,

high light output and shallow recessed depth. Available in

two sizes with different light outputs, these luminaires can

adapt to the requirements of the room.

Luminaires with a downlight and additional unshielded

light. This technology provides a high level of visual

comfort and high illuminance.

Each luminaire has two fluorescent lamps with electronic

ballasts that can be switched separately. The unshielded

light or the downlight can be operated separately or both

together.

An easy-to-operate mounting system allows fast,

economical and convenient installation.

The luminaires are equipped with electronic ballasts.

All important technical data are given in the instructions

for use for these luminaires.

»DUATA« recessed ceiling luminaires Recessed depth 120 -140 mm 3550 - 6400 lumen

25

A

B

C

D

Recessed ceiling luminaires for fluorescent lamps


Reflector of pure high-gloss anodized aluminium

Die cast aluminium fitter


The required ballasts are fitted.


lamp lumen A B C D

8928 1 T16 R 22 W + 1 TC-TELI 26 W 3550 330 120 305 508929 1 T16 R 40 W + 1 TC-TELI 42 W 6400 470 140 395 70

26

QT 18 40 W

30°

540cd/klm

1 QT 32 60 W1 QT 32 75 W

30°

540cd/klm

1 QT 32 100 W

30°

900cd/klm

1 QT 32 150 W

30°

240cd/klm

1 TC-DEL 13 W1 TC-DEL 26 W

30°

180cd/klm

1 TC-TELI 32 W

30°

180cd/klm

Recessed ceiling luminaires · Downlights Recessed depth 90 -100 mm 460 - 2400 lumen

Recessed luminaires in five sizes for installation in suspended ceilings with shallow depths.

An easy-to-operate mounting system ensures fast, economic and convenient installation.

Luminaires with high-quality reflectors of pure aluminium and hand-blown three-ply opal glass.

The reflectors direct most of the light downwards and produce high horizontal illuminance.

The remainder of the light is directed through the three-ply opal glass and provides vertical illuminance.

The dual effect of this luminaire series provides a high level of visual comfort.

The different dimensions and light outputs allow a host of lighting tasks to be solved with one luminaire series.

Luminaires to illuminate rooms, stairways and halls.



Matching surface-mounted luminaires are given on page 44.

27

A

B

D

C

E

1501301109570

1501301109570

Recessed ceiling luminaires · Downlights for halogen lamps and fluorescent lamps


Reflector of pure anodized aluminium with built-in annular shield

Recessed luminaires with metal fitters Ceiling frame ring options • stainless steel • metal with white enamel RAL 9010

Suitable for through-wiring


s/steel white lamp lumen A B C D E

8466 8461 1 QT 18 40 W 460 70 90 86 90 968467 8462 1 QT 32 60 W 790 95 117 112 90 1288468 8463 1 QT 32 75 W 1050 110 120 127 90 1368469 8464 1 QT 32 100 W 1470 130 126 150 100 1658470 8465 1 QT 32 150 W 2400 150 150 170 100 185

8404 8399 1 TC-DEL 13 W 850 110 142 127 90 1368405 8400 1 TC-DEL 26 W 1750 130 150 150 100 1658406 8401 1 TC-TELI 32 W 2400 150 150 170 100 185

C · D = recessed dimensions

28

847984806658

30°

150cd/klm

84768477847866576659

30°

150cd/klm

8475

30°

150cd/klm

84738474

30°

180cd/klm

Recessed luminaires for installation in suspended ceilings with shallow depths. Available with symmetrical or asymmetrical light distribution. The asymmetrical luminaire glass can be infinitely rotated and allows adjustment to different lighting situations. These luminaires are made of hand-blown, three-ply opal glass in the form of precisely calculated parabolic reflectors. The light is reflected by the white inside of the glass and directed onto the illuminated surface. In contrast to metal reflectors, part of the light penetrates the satin matt, opal glass body, and is softly and uniformly distributed as unshielded light. These luminaires are impressive for their light effect, technology and high level of visual comfort. An easy-to-operate mounting system ensures fast and economic installation. The luminaires for fluorescent lamps and discharge lamps are equipped with electronic ballasts. Matching surface-mounted ceiling luminaires are given on page 48, matching pendant luminaires on page 226.

Recessed ceiling luminaires · Downlights with symmetrical or asymmetrical light distribution Recessed depth 100 mm · 790 - 6400 lumen

29

A

B

D

C

E

360°

A

B

D

C

E

Recessed ceiling luminaires · Downlights for halogen lamps, fluorescent lamps and discharge lamps

Hand-blown three-ply opal glass, satin matt with thread

Metal fitter · Ceiling frame ring • white aluminium enamel RAL 9006


Luminaires for fluorescent lamps and discharge lamps with built-in electronic ballast


lamp lumen A B C D E

8473 1 QT 26 60 W 790 105 162 86 90 968474 1 QT 32 75 W 1050 140 215 112 90 128

8475 1 TC-TELI 26 W 1750 140 215 112 90 128

symmetrical light distribution

asymmetrical light distribution


8476 1 QT 26 60 W 790 140 114 86 90 968477 1 QT 32 75 W 1050 185 150 112 90 1288478 1 QT 32 100 W 1470 220 175 127 90 1366657 1 QT 32 150 W 2400 260 220 150 100 165

8479 1 TC-TELI 26 W 1750 185 150 112 90 1288480 1 TC-TELI 32 W 2400 220 175 127 90 1366658 1 TC-TELI 42 W 3200 260 220 150 100 165

6659 1 HIE 70 W 6400 260 220 150 100 165

30

83768377

30°

150cd/klm

8471

30°

90cd/klm

6656

30°

420cd/klm

8472

30°

480cd/klm

Recessed luminaires in three sizes with diverse light outputs. Luminaires for installation in suspended ceilings

with shallow depths. An easy-to-operate mounting system ensures fast, economic and convenient installation.

A series of downlights with dual lighting technology. The unit comprising reflector and annular shield divides

the light from the light source into a main part as downlight with a high illuminance directly below the luminaires,

and a smaller part as unshielded light which additionally illuminates the room. Satin matt crystal glass with light-

diffusing texture provides a high level of visual comfort.


Recessed ceiling luminaires · Downlights Recessed depth 90 -100 mm 790 - 2400 lumen

page 38 page 220

31

A

B

D

C

E

140 185 240

Recessed ceiling luminaires · Downlights for halogen lamps and fluorescent lamps

Crystal glass with light-diffusing texture, satin matt with thread


8471 with built-in annular shield

Ceiling frame ring • stainless steel




8471 1 QT 26 60 W 790 140 105 86 90 968472 1 QT 32 100 W 1470 185 135 112 90 1286656 1 QT 32 150 W 2400 240 175 150 100 165

8376 1 TC-TELI 18 W 1150 185 135 112 90 1288377 1 TC-TELI 32 W 2400 240 175 150 100 165


32

7957795579587956

30°

1200cd/klm

78137803

30°

360cd/klm

7814780478157805

30°

240cd/klm

78227818

30°

420cd/klm

7816780678177807

30°

120cd/klm

78237819

30°

180cd/klm

IP 64

88168818

30°

240cd/klm

88178819

30°

420cd/klm

Recessed ceiling luminaires in five sizes. The different dimensions of the luminaires can solve a host of lighting tasks.

Perfectly calculated reflectors made of pure aluminium, and the use of modern lamps allow light distribution to be varied

accordingly. Depending on the type of lamp, light distribution can be narrow or wide beam.

The glare from the luminaires is optimally suppressed by the partially frosted inside of the crystal glass. Part of the light

is directed laterally by the thick-walled glass onto the ceiling, and provides additional visual comfort due to horizontal

illuminance.

The perfect mounting system of the luminaires ensures shock-proof installation in suspended ceilings up to a material

thickness of 50 mm.


Recessed ceiling luminaires · Downlights Recessed depth 90 - 230 mm 320 - 3400 lumen · Protection class IP 64

33

·B·

· A ·

· C ·

· A ·

·

B

·A

B

A

B

C

·B·

· A ·

· C ·

· A ·

·

B

·A

B

A

B

C

80 110 145 175 220

80 110 145 175 220

Recessed ceiling luminaires · Downlights for low voltage halogen lamps, halogen lamps, fluorescent lamps and high-intensity discharge lamps Protection class IP 64 7957 · 7955 · 7958 · 7956 Safety class III 3 · without transformer

Crystal glass, partially frosted

Reflector of pure anodized aluminium

Die cast aluminium lamp housing Ceiling frame ring options • stainless steel • metal with white enamel RAL 9010

With 2 cable entries for through-wiring 7955 · 7957 1 cable entry

The luminaires for fluorescent lamps are fitted with the required ballasts. 8816 · 8818 · 8817 · 8819 with built-in electronic ballast 8816 · 8818 lamp base GU 6.5 8817 · 8819 lamp base G 8.5

When preparing the recessed opening in concrete ceilings, installation housings are required. Aluminium installation housings with 2 cable entries are given in the table. Installation housings are accessories and must be ordered separately.

stainless steel

white

lamp

lumen

A

B

C

7957 7955 1 QT 9-ax 20 W 320 80 90 717958 7956 1 QT 12-ax 35 W 600 110 95 97

7813 7803 1 QT 18 40 W 460 110 145 977814 7804 1 QT 18 60 W 790 145 155 1287815 7805 1 QT 32 75 W 1050 175 205 1607822 7818 1 QT 32 100 W 1470 220 205 202

7816 7806 1 TC-T 13 W 900 145 185 1287817 7807 1 TC-T 18 W 1200 175 205 1607823 7819 1 TC-T 26 W 1800 220 230 202

8816 8818 1 HIT-TC-CE 20 W 1700 175 205 1608817 8819 1 HIT-TC-CE 35 W 3400 220 230 202



A

B

5077 170 1075047 200 165

5047 200 1655048 240 2005049 280 2205050 320 250

5048 240 2005049 280 2205050 320 250

5049 280 2205050 320 250

34

IP 65

83838380

30°

120cd/klm

83828379

30°

90cd/klm

83818378

30°

150cd/klm

Recessed luminaires in three sizes. Luminaires with shallow recessed depths

and a patented mounting system – EP 0686 806 – for easy and economic

installation. The different dimensions and light outputs of the luminaires allow

a host of lighting tasks to be solved with one luminaire series.

Luminaires with broad spread light distribution to illuminate rooms, stairways

and halls – wherever shallow projection, high light output and great robustness

are required.

Dust-proof and jet-proof luminaires for use in rooms with a high level of dust

or in wet rooms, for example bathrooms.

The light-diffusing texture of the crystal glass also directs the light onto the

installation surface of the luminaires, creating an effective, additional level of

light. This produces a distinctly higher level of illumination in the room.



All important technical data are given in the instructions for use for these

luminaires.

Recessed ceiling luminaires Recessed depth 100 - 120 mm 1150 - 6400 lumen · Protection class IP 65

35

B

D

A

C

A

C

B

190 250 300

Recessed ceiling luminaires for fluorescent lamps Protection class IP 65



Die cast aluminium luminaire housing and frame Surface finish of the frame options • white aluminium enamel RAL 9006 • white enamel RAL 9010


Luminaires with built-in electronic ballast

When preparing the recessed opening in concrete ceilings, installation housings are required. Installation housings made of aluminium and glass-fibre reinforced plastic with 4 cable entries are given in the table. Installation housings are accessories and must be ordered separately.

Electrical connection of the luminaires is easy and fast. First, the compact electrical component is connected. The luminaire housing and electrical component are then connected to each other and installed in the ceiling.

white aluminium

white

lamp

lumen

A

B

C

D

8381 8378 1 TC-TELI 18 W 1150 190 255 175 1008382 8379 2 TC-TELI 26 W 3500 250 355 230 1158383 8380 2 TC-TELI 42 W 6400 300 405 280 120


A

B

C

5084 305 205 1255085 405 260 1255086 455 305 125


36

806576957697

30°

300cd/klm

769676988508

30°

240cd/klm

8066

30°

360cd/klm

806476937441

30°

180cd/klm

769476037488

30°

420cd/klm

7489

30°

420cd/klm

High-power downlights with dual lighting technology, equipped with a

combined system of hand-blown glass and reflectors. These luminaires are

equipped for halogen lamps, fluorescent lamps and discharge lamps, and

available in different sizes and types of glass.

Perfectly calculated reflectors made of pure aluminium, and the use of modern

lamps allows light distribution to be varied accordingly.

The reflectors direct most of the light downwards and produce a high level

of horizontal illuminance on the illuminated surface. The remainder of the

light is directed through the luminaire glass and also illuminates the room and

installation surface of the luminaires. The dual effect of this luminaire series

provides a high level of visual comfort.

»DUATA« ceiling luminaires are available either with crystal glass, providing

brilliant light, or with opal glass, providing soft and uniform distribution of the

light.

The luminaires for fluorescent lamps are fitted with electronic ballasts.

Luminaires for a maximum wattage of 42 W can also be operated at 32 W,

and luminaires for discharge lamps at 70 W or 100 W.

»DUATA« ceiling luminaires · Downlights 1470 - 8600 lumen

page 218

37

A

B

360285230170

360285230170

A

BCeiling luminaires · Downlights for halogen lamps, fluorescent lamps and discharge lamps

Luminaires with hand-blown crystal glass are equipped with a reflector made of pure high-gloss anodized aluminium. Die cast aluminium and aluminium parts • white aluminium enamel RAL 9006

Luminaires with hand-blown opal glass are equipped with a reflector of pure anodized aluminium. Die cast aluminium and aluminium parts • light grey enamel RAL 7035


Luminaires for fluorescent lamps with electronic ballast The luminaires for discharge lamps are fitted with the required low-loss ballasts.

To produce high horizontal illuminance, most of the light is directed downwards by a reflector. The remainder of the light is unshielded, and provides vertical illuminance with a high level of visual comfort.

white aluminium

lamp

lumen

A

B

8065 1 QT 32 100 W 1470 170 1907695 1 QT 32 150 W 2400 230 2457697 1 QT 32 250 W 4210 285 320

7696 1 TC-TELI 26 W 1750 230 2457698 1 TC-TELI 42 W 3200 285 3208508 1 TC-TELI 57 W 4300 360 400

8066 1 HIE 70 · 100 W 8600 360 400

crystal glass · downlights

light grey

lamp

lumen

A

B

8064 1 QT 32 100 W 1470 170 1907693 1 QT 32 150 W 2400 230 2457441 1 QT 32 250 W 4210 285 320


7489 1 HIE 70 · 100 W 8600 360 400

opal glass · downlights

38

8926

30°

480cd/klm

8927

30°

420cd/klm

8322

30°

150cd/klm

8323

30°

150cd/klm

Ceiling luminaires available in different sizes with high light outputs.

A convenient mounting system allows simple and economic installation.

A new series of downlights with dual lighting technology. The unit comprising

reflector and annular shield divides the light from the light source into a main

part as downlight with a high illuminance directly below the luminaires, and

a smaller part as unshielded light which additionally illuminates the room.

The satin matt crystal glass with light-diffusing texture provides a uniform and

pleasant light.

Matching recessed ceiling luminaires are given on page 30, matching pendant

luminaires on page 220.

Ceiling luminaires · Downlights 1150 - 2400 lumen

39

A

B

C

Ceiling luminaires · Downlights for halogen lamps and fluorescent lamps


Reflector of pure high-gloss anodized aluminium with built-in annular shield

Metal fitter • white aluminium enamel RAL 9006



The mounting system of the luminaires allows fast and economic installation. They are connected electrically by a convenient plug connection.

lamp lumen A B C

8926 1 QT 32 100 W 1470 185 225 958927 1 QT 32 150 W 2400 240 290 130

8322 1 TC-TELI 18 W 1150 185 225 958323 1 TC-TELI 32 W 2400 240 290 130

40

IP 64

8860

30°

420cd/klm

8996

30°

480cd/klm

8861

30°

420cd/klm

8997

30°

720cd/klm

8862

30°

300cd/klm

8998

30°

720cd/klm

8863

30°

300cd/klm

8859

30°

420cd/klm

High-power downlights with dual lighting technology, available in three sizes

for halogen lamps, fluorescent lamps and discharge lamps. Compact, powerful

luminaires with a combined system of hand-blown, partially frosted crystal glass

and reflectors. These enclosed ceiling luminaires are dust-proof and jet-proof.

Perfectly calculated reflectors made of pure aluminium and the use of modern

lamps allow light distribution to be varied accordingly.

The reflectors direct most of the light downwards and produce high horizontal

illuminance on the illuminated surface.

The remainder of the light is directed through the partially frosted luminaire

glass and additionally illuminates the room.


The luminaires for fluorescent lamps and discharge lamps are fitted with

electronic ballasts.

Ceiling luminaires · Downlights 1050 - 6400 lumen · Protection class IP 64

41

A

B

220180150

lamp lumen A B

8996 1 QT 32 75 W 1050 150 1908997 1 QT 32 100 W 1470 185 2508998 1 QT 32 150 W 2400 220 280


8862 1 HIE 35 W 2850 185 2508863 1 HIE 70 W 6400 220 280

Ceiling luminaires · Downlights for halogen lamps, fluorescent lamps and discharge lamps Protection class IP 64

Hand-blown crystal glass, partially frosted with thread

Reflector of pure high-gloss anodized aluminium with built-in annular shield

Stainless steel metal fitter



42

IP 64

Ceiling luminaires in four sizes for halogen lamps and discharge lamps.

Luminaires with thick-walled crystal glass and reflectors of pure anodized aluminium.

The glare from the main downlight is optimally suppressed by the partially frosted inside

of the crystal glass. A small part of the light is directed laterally by the glass onto the ceiling

and into the room, and provides additional visual comfort due to horizontal illuminance.

These compact, powerful luminaires can be opened without tools for relamping. An easy-

to-operate mounting system ensures fast, economic and convenient installation.

These dust-proof and jet-proof luminaires are designed for use in rooms where there is a

high incidence of dust or for bathrooms.

Perfect lighting tools both in terms of technology and design for good light planning.

Ceiling luminaires · Downlights 460 - 3400 lumen · Protection class IP 64

43

868686878688

300cd/klm

87188864

30°

480cd/klm

A

B

12010580 140

Ceiling luminaires · Downlights for halogen lamps und discharge lamps Protection class IP 64


Aluminium luminaire housing • white aluminium enamel RAL 9006


Thread to open luminaire without tools

8718 with built-in electronic ballast lamp base GU 6.5

8864 with built-in electronic ballast lamp base G 8.5

With 2 cable entries for through-wiring 8686 1 cable entry

lamp lumen A B

8686 1 QT 14 40 W 460 80 1158687 1 QT 14 75 W 1050 105 1358688 1 QT 18 100 W 1470 120 165

8718 1 HIT-TC-CE 20 W 1700 120 1658864 1 HIT-TC-CE 35 W 3400 140 200

44

1 QT 18 40 W

30°

540cd/klm

1 QT 32 60

30°

540cd/klm

1 QT 32 75 W

30°

540cd/klm

1 QT 32 100 W

30°

900cd/klm

1 QT 32 150 W

30°

240cd/klm

1 TC-D 13W

30°

180cd/klm

1 TC-D 26 W

30°

180cd/klm

1 TC-TELI 32 W

30°

180cd/klm

Ceiling luminaires in five sizes. A convenient mounting system allows simple and economic installation.

Luminaires with high-quality reflectors of pure aluminium and hand-blown opal glass.

The reflectors direct the largest part of the light downwards and produce high horizontal illuminance.

The remaining part of the light is directed through the opal glass and provides vertical illuminance.


The different dimensions and light outputs allow a host of lighting tasks to be solved with just one

luminaire series. Luminaires to illuminate rooms, stairways and halls.

The luminaires for fluorescent lamps TC-TELI are equipped with electronic ballasts.

Matching recessed luminaires are given on page 26.

Ceiling luminaires · Downlights 460 - 2400 lumen

45

A

B

C

1501301109570

1501301109570

Ceiling luminaires · Downlights for halogen lamps and fluorescent lamps

Hand-blown three-ply opal glass with thread

Reflector of pure anodized aluminium with built-in annular shield

Fitters options • stainless steel • metal with white enamel RAL 9010

With 2 cable entries for through-wiring Connected electrically by a convenient plug connection

7972 · 7973 1 cable entry


s/steel white lamp lumen A B C

7973 7972 1 QT 18 40 W 460 70 150 907676 7674 1 QT 32 60 W 790 95 180 1207677 7675 1 QT 32 75 W 1050 110 185 1407844 7843 1 QT 32 100 W 1470 130 200 1608276 8274 1 QT 32 150 W 2400 150 255 190

7850 7848 1 TC-D 13 W 900 110 230 1407851 7849 1 TC-D 26 W 1800 130 255 1608277 8275 1 TC-TELI 32 W 2400 150 255 190

46

8299

30°

540cd/klm

8300

30°

750cd/klm

8301

30°

720cd/klm

8302

30°

900cd/klm

Ceiling luminaires in four sizes. Luminaires with high-quality reflectors and

hand-blown crystal glass, providing brilliant light.

The reflectors direct most of the light downwards and produce high horizontal

illuminance. The remainder of the light is directed through the clear crystal

glass and provides vertical illuminance.

These luminaires are characterised by a convenient mounting system, allowing

simple and economic installation.

Ceiling luminaires · Downlights 460 -1470 lumen

47

A

B

C

1501301109570

1501301109570

Ceiling luminaires · Downlights for halogen lamps

Hand-blown crystal glass with thread


Stainless steel fitter

With 2 cable entries for through-wiring Connected electrically by a convenient plug connection

8299 1 cable entry

lamp lumen A B C

8299 1 QT 18 40 W 460 70 150 908300 1 QT 32 60 W 790 95 180 1208301 1 QT 32 75 W 1050 110 185 1408302 1 QT 32 100 W 1470 130 200 160

48

841666606662

30°

150cd/klm

8418

30°

150cd/klm

84148415

30°

150cd/klm

84318432

30°

180cd/klm

84196661

30°

120cd/klm

8433

30°

150cd/klm

Ceiling luminaires with symmetrical or asymmetrical light distribution. The asymmetrical luminaire glass can be infinitely

rotated and allows adjustment to different lighting situations. These luminaires are especially suitable for illuminating walls

or architectural details. Luminaires with hand-blown, three-ply opal glass in the form of precisely calculated parabolic

reflectors. The light is reflected by the white inside of the glass and directed onto the illuminated surface. In contrast to

luminaires with metal reflectors, part of the light penetrates the satin matt, opal glass body and is distributed softly and

uniformly as unshielded light. These luminaires are impressive for their light effect, technology and high level of visual

comfort.

An easy-to-operate mounting system ensures fast, economic and convenient installation.

The luminaires for fluorescent lamps and discharge lamps are equipped with electronic ballasts.

Matching recessed ceiling luminaires are given on page 28, matching pendant luminaires on page 226.

Ceiling luminaires · Downlights with symmetrical or asymmetrical light distribution 790 - 6400 lumen

49

360°

A

B

C

A

B

C

The perfect mounting system allows fast and economic installation. The luminaires are equipped with 2 cable entries for through-wiring. They are connected electrically by a convenient plug connection.

Ceiling luminaires for halogen lamps, fluorescent lamps and discharge lamps





lamp lumen A B C

8431 1 QT 26 60 W 790 105 230 908432 1 QT 32 75 W 1050 140 310 120

8433 1 TC-TELI 26 W 1750 140 310 120

symmetrical light distribution

asymmetrical light distribution

lamp lumen A B C

8414 1 QT 26 60 W 790 140 185 908415 1 QT 32 75 W 1050 185 245 1208416 1 QT 32 100 W 1470 220 295 1406660 1 QT 32 150 W 2400 260 345 160


6662 1 HIE 70 W 6400 260 345 160

50

8170

45°

60cd/klm

8171

45°

60cd/klm

8364

45°

80cd/klm

Unshielded ceiling luminaires in two sizes for halogen lamps and fluorescent lamps.

These luminaires are equipped with stainless steel metal parts and satin matt crystal glass. The precise light-diffusing

texture of the thick-walled glass produces pleasant, uniform light. The luminaires are equipped with inside annular

shields to ensure optimum glare suppression.

An easy-to-operate mounting system allows fast and economic installation.

This luminaire series is complemented by the recessed ceiling luminaires on page 30, wall luminaires on page 138

and pendant luminaires on page 270.

The technology and uniform design of these luminaires allows the planning of lighting situations where the aim is to

achieve an overall harmonious concept.

Ceiling luminaires for unshielded light 790 -1470 lumen

51

A

B

C

Ceiling luminaires for halogen lamps and fluorescent lamps

Crystal glass with light-diffusing texture, satin matt, with thread

Built-in annular shield

Fitter made of • stainless steel



lamp lumen A B C

8170 1 QT 26 60 W 790 140 165 908171 1 QT 32 100 W 1470 185 210 120

8364 1 TC-TELI 18 W 1150 185 230 120

The perfect mounting system allows fast and economic installation. The luminaires are equipped with 2 cable entries for through-wiring. They are connected electrically by a convenient plug connection.

52

A powerful series of luminaires, available in five sizes with

different light outputs.

Their appearance, especially that of the large luminaires,

is essentially defined by their impressive glass volume.

The cylinders made of hand-blown, three-ply opal glass

illuminate the room with a high level of uniformity.

These ceiling luminaires – whether illuminated or not – are

distinctive elements of interior design.

Arranged either in strict patterns or in groups, they unfold

their exceptional and impressive light effect.

An easy-to-operate mounting system allows fast and

economic installation.

The luminaires for fluorescent lamps are equipped with

electronic ballasts. Luminaires for a maximum wattage

of TC-TELI 42 W can also be operated at 32 W or 26 W.

Matching wall luminaires are given on page 190 – matching

pendant luminaires on page 228.

Ceiling luminaires for unshielded light with high light outputs · 935 -18 000 lumen

The perfect mounting system ensures fast and economic installation. The luminaires are equipped with 2 cable entries for through-wiring. They are connected electrically by a convenient plug connection.

53

A

B

C

185265

380

600

820

185265

380

600

820

185265

380

600

820

185265

380

600

820

185265

380

600

820


8577 8576 1 A 60 75 W 935 120 185 908930 8931 1 A 65 150 W 2160 160 265 140

8578 8514 1 TC-TELI 26 W 1750 160 265 1408579 8515 1 TC-TELI 42 W 3200 220 380 1908922 8920 3 TC-L 36 W 8700 220 600 1908923 8921 3 TC-L 80 W 18000 300 820 190

Ceiling luminaires for general service lamps and fluorescent lamps

Hand-blown opal glass, satin matt 8922 · 8923 · 8920 · 8921 smooth opal glass

Fitter made of • stainless steel or metal fitter • white enamel RAL 9010



54

Ceiling luminaires in three sizes for general service lamps and fluorescent lamps.

Luminaires with clear, brilliant crystal glass. Partially matt glass ensures pleasant

distribution of luminance without affecting the aesthetics of the clear glass.

Perfectly proportioned, these luminaires are impressive for the great brilliance of

the glass and visible technical structure. High-quality elements of interior design.

An easy-to-operate mounting system ensures fast and economic installation.


Luminaires for a maximum wattage of 42 W can also be operated at 32 W or 26 W.

Ceiling luminaires for unshielded light 935 - 3200 lumen

page 184page 236

55

A

B

C

185265

380

lamp lumen A B C

8689 1 A 60 75 W 935 120 185 908690 1 A 65 150 W 2160 160 265 140

8691 1 TC-TELI 26 W 1750 160 265 1408932 1 TC-TELI 42 W 3200 220 380 190

The perfect mounting system ensures fast and economic installation. The luminaires are equipped with 2 cable entries for through-wiring. They are connected electrically by a convenient plug connection.


Crystal glass, partially matt

Fitter made of • stainless steel



56

Luminaires with hand-blown antique crystal glass and high-quality

metal fitters in different materials.

The beauty and brilliance of the glass are accentuated most effectively

by clear general service lamps. Air inclusions of different shape and

size make each glass cylinder a unique example of the glassmaker’s art.

Perfectly proportioned, these luminaires are impressive for their clear

glass and visible technical structure. Luminaires for brilliant and

exceptionally expressive light. High-quality elements of interior design.

Matching wall luminaires are given on page 184 – matching pendant



57

A

B

C

A

B

C Ceiling luminaires for general service lamps

Hand-blown antique crystal glass

Metal fitter Surface finish options • chrome • brass

chrome brass lamp lumen A B C

8319 8318 1 A 60 100 W 1340 160 250 1308321 8320 4 A 60 75 W 3740 220 400 130

58

Unshielded chandeliers · Ceiling luminaires 8280 - 32400 lumen

A new series of ceiling luminaires which we call chandeliers.

Luminaires with festive and impressive flair.

Their appearance is timelessly classic and graceful in the room.

The slim cylinders made of hand-blown, three-ply opal glass are

held by strikingly precise rings with rectangular cross-section.

Individually manufactured with masterly skill, the precious metal

parts are polished by hand.

These luminaires produce festive light with a distinctive effect,

and are designed for exclusive private rooms and grand elegant

architecture.

To special order, we also supply these luminaires in a combination

of different chandelier diameters. Special RAL colours are available

on request.

A special effect is produced

when several luminaires are

arranged in a large room or

combined impressively with

the matching wall luminaires

on page 194 and pendant

luminaires on page 250 - 253.

59

C

BD

A

B

C

A

· ·· 1370 ·710

Two-tier chandeliers for halogen lamps and fluorescent lamps


Polished aluminium metal parts

C = Ø of the individual glass cylinder


lamp lumen A B C

8979 18 QT 26 40 W 8 280 710 500 508980 18 QT 32 100 W 26 460 1370 850 80

8981 18 TC-DEL 26 W 32 400 1370 850 80

60

Ceiling luminaires in two sizes for fluorescent lamps.

Elongated luminaires with slim cylinders for a host of

applications. This series is characterised by high light

outputs and economic lamps.

Depending on their arrangement, the luminaires can

divide and structure rooms.

They create their special effect when several luminaires

are arranged in groups or linear structures, or combined

impressively with matching wall luminaires and pendant

luminaires.


page 228page 190

61

A

B

C

Ceiling luminaires for fluorescent lamps

Hand-blown opal glass

Metal parts • white enamel RAL 9010


lamp lumen A B C

8457 1 TC-L 40 W 3500 630 135 1008458 1 TC-L 55 W 4800 700 145 110

62

Ceiling luminaires with two different distances between light source and mounting surface. Luminaires that use

the reflection properties of ceiling or wall surfaces.

Part of the light is reflected as indirect light. In combination with the wide beam light from the matt glass, this

produces a very pleasant ambient light with a high level of visual comfort.

Unshielded luminaires with high light outputs for different ceiling heights. Designed for general service lamps or

for fluorescent lamps. Three different lengths allow the luminaires to be adapted to the respective lighting task.

On request, we also supply these luminaires in other lengths to meet customer requirements.

Ceiling luminaires for different mounting heights 935 - 9200 lumen

63

A

B

A

B

A

B

A

B

lamp lumen A B

8865 4 A 60 75 W 3740 400 10008866 4 A 60 100 W 5360 500 1000

8867 2 T16 R 22 + 55 W 6000 400 10008868 2 T16 R 55 + 60 W 9200 500 1000

lamp lumen A B

7950 1 A 60 75 W 935 290 1807896 4 A 60 75 W 3740 400 2207897 4 A 60 100 W 5360 500 260

8459 2 T16 R 22 + 55 W 6000 400 2208460 2 T16 R 55 + 60 W 9200 500 260


Crystal glass, satin matt, inside white



64

3 A 60

30°

120cd/klm

4 A 60

30°

120cd/klm

5 A 60

30°

120cd/klm

2 TC-TELI 32 W

30°

75cd/klm

2 TC-TELI 42 W

30°

120cd/klm

2 TC-TELI 57 W

30°

90cd/klm

Large luminaires in three sizes with high light outputs for

general service lamps and fluorescent lamps.

These unshielded ceiling and wall luminaires in the elegant

design of a spherical segment are characterised by their

shallow projection. The precious opal glass is glarefree

even where light output is high, and distributes the light

from the lamps softly and uniformly in the room.

The metal ring of the fitter complements the lines of the

glass in perfect contrast with the mounting surface.

These luminaires are designed to illuminate large rooms,

stairways, halls and wherever high-quality luminaires with

high light outputs are required.


electronic ballasts. Luminaires for a maximum wattage

of 42 W can also be operated at 32 W or 26 W, and

luminaires for 32 W also at 26 W.

Ceiling and wall luminaires · 2130 - 8600 lumen

The metal fitters of the luminaires on this double page are available in three different surface finishes:chrome, brass or white enamel RAL 9010.

65

A

B

440 560 670

440 560 670

chrome brass white lamp lumen A B

7797 7762 7756 3 A 60 60 W 2130 440 1357798 7763 7757 4 A 60 60 W 2840 560 1607799 7764 7758 5 A 60 60 W 3550 670 175

8840 8837 8830 2 TC-TELI 32 W 4800 440 1358841 8838 8831 2 TC-TELI 42 W 6400 560 1608842 8839 8832 2 TC-TELI 57 W 8600 670 175

Ceiling and wall luminaires for general service lamps and fluorescent lamps

Hand-blown opal glass, satin matt with twist-lock closure

Metal fitter Surface finish options • chrome • brass • white enamel RAL 9010



6666

1 A 60

30°

120cd/klm

1 A 65

30°

120cd/klm

1 A 80

30°

120cd/klm

1 TC-TELI

30°

75cd/klm

2 TC-TELI

30°

72cd/klm

Ceiling and wall luminaires in four sizes with different light outputs. Classic,

unshielded luminaires for general service lamps and fluorescent lamps.

Luminaires with hand-blown, three-ply opal glass, in which a wafer-thin opal

glass layer is enclosed between two crystal glass layers. This produces a highly

translucent but opaque glass that distributes the light very uniformly, and this is

especially enhanced by the large surface of the luminaire glass.

These luminaires are designed to illuminate private and public rooms, stairways

or halls.


Luminaires for a maximum wattage of 42 W can also be operated at 32 W or

26 W, and luminaires for 32 W also at 26 W.


67

A

B

270 320 370 450

270 320 370 450


3491 3498 3487 1 A 60 75 W 935 270 1503492 3499 3488 1 A 60 100 W 1340 320 1803493 3500 3489 1 A 65 150 W 2160 370 2103494 3501 3490 1 A 80 200 W 3040 450 240

8847 8843 8833 1 TC-TELI 26 W 1750 270 1508848 8844 8834 1 TC-TELI 32 W 2400 320 1808849 8845 8835 1 TC-TELI 42 W 3200 370 2108850 8846 8836 2 TC-TELI 32 W 4800 450 240






68

1 A 60

30°

120cd/klm

2 A 60

30°

120cd/klm

3 A 604 A 60

30°

120cd/klm

1 TC-TEL1 TC-TELI

30°

90cd/klm

2 TC-TELI

30°

90cd/klm

IP 44

Luminaires in five sizes and four different materials.

Classic, unshielded luminaires with different light outputs

for general service lamps and fluorescent lamps.

Luminaires with hand-blown, three-ply opal glass, in which

a wafer-thin opal glass layer is enclosed between two

crystal glass layers. This produces a highly translucent

but opaque glass that distributes the light very uniformly,

and this is especially enhanced by the large surface of the

luminaire glass.

These luminaires are designed to illuminate private and

public rooms, stairways or halls.



Luminaires for a maximum wattage of 42 W can also be

operated at 32 W or 26 W, and luminaires for 32 W also

at 26 W.

Ceiling and wall luminaires · 710 - 8600 lumen Protection class IP 44

69

A

B

280 350 420 540220

280 350 420 540220

s/steel chrome brass white lamp lumen A B

7490 3348 3073 3230 1 A 60 60 W 710 220 1107491 3640 3636 3638 1 A 60 75 W 935 280 1307492 3349 3074 3231 2 A 60 60 W 1420 350 1457493 3949 3086 3232 3 A 60 60 W 2130 420 1758297 8296 3389 3390 4 A 60 60 W 2840 540 210

8800 8805 8810 8795 1 TC-TEL 13 W 850 220 1108801 8806 8811 8796 1 TC-TELI 26 W 1750 280 1308802 8807 8812 8797 1 TC-TELI 42 W 3200 350 1458803 8808 8813 8798 2 TC-TELI 32 W 4800 420 1758804 8809 8814 8799 2 TC-TELI 57 W 8600 540 210

Ceiling and wall luminaires for general service lamps and fluorescent lamps Protection class IP 44 up to Ø 350 mm


Metal fitter Surface finish options • stainless steel • chrome • brass • white enamel RAL 9010

With 2 cable entries for through-wiring 7490 · 3348 · 3073 · 3230 8800 · 8805 · 8810 · 8795 1 cable entry


70

1 TC-T 18 W1 TC-T 26 W

30°

90cd/klm

2 TC-T 18 W2 TC-T 26 W

30°

120cd/klm

1 TC-TELI 18W1 TC-TELI 26W

30°

90cd/klm

1 TC-TELI 42W1 TC-TELI 57W

30°

120cd/klm

2 TC-TELI 42 W2 TC-TELI 57 W

30°

120cd/klm

1 QT 26 40 W1 QT 32 75 W

30°

90cd/klm

2 QT 32 60 W2 QT 32 75 W

30°

90cd/klm

IP 44

2 TC-F 36 W3 TC-F 36 W

30°

90cd/klm

Compact and powerful luminaires in six sizes and four different materials.

Luminaires for walls and ceilings that can solve perfectly almost any interior

task in planning and project work.

Perfect proportions and balance between high-quality metal fitters and hand-

blown opal glass make these luminaires aesthetic and long-lasting elements

of interior design.

The luminaires for fluorescent lamps TC-TELI are equipped with electronic

ballasts. Luminaires for a maximum wattage of 42 W can also be operated

at 32 W.


71

A

B

500400350300250200

500400350300250200

s/steel chrome brass white lamp lumen A B

7510 7509 7508 7507 1 QT 26 40 W 460 200 807447 7063 7057 7050 1 QT 32 75 W 1050 250 907448 7064 7058 7051 2 QT 32 60 W 1580 300 1107449 7143 7141 7139 2 QT 32 75 W 2100 350 125

8626 8618 8610 8602 1 TC-T 18 W 1200 200 808627 8619 8611 8603 1 TC-T 26 W 1800 250 907451 7067 7061 7054 2 TC-T 18 W 2400 300 1107452 7144 7142 7140 2 TC-T 26 W 3600 350 1257453 7068 7062 7055 2 TC-F 36 W 5600 400 1407454 7285 7284 7283 3 TC-F 36 W 8400 500 160

8628 8620 8612 8604 1 TC-TELI 18 W 1150 200 808629 8621 8613 8605 1 TC-TELI 26 W 1750 250 908630 8622 8614 8606 1 TC-TELI 42 W 3200 300 1108631 8623 8615 8607 1 TC-TELI 57 W 4300 350 1258632 8624 8616 8608 2 TC-TELI 42 W 6400 400 1408633 8625 8617 8609 2 TC-TELI 57 W 8600 500 160

Ceiling and wall luminaires for halogen lamps and fluorescent lamps Protection class IP 44





72

IP 44

1 QT 32

30°

120cd/klm

2 QT 32

30°

120cd/klm

1 TC-D

30°

120cd/klm

2 TC-D

30°

90cd/klm

3 TC-F

30°

90cd/klm

2 T16R

30°

90cd/klm

Luminaires in five sizes for halogen lamps and fluorescent lamps.

This luminaire series is characterised by the extremely shallow

projection and wide range of different lamps and light outputs.

Three-ply opal glass is held by massive cast fitters made of

high-quality aluminium. The glass in the exquisite fitters appears

like discreetly mounted precious stones. Satin matt opal glass

combined with hand-polished, die-cast aluminium, with brass or

with a pure white fitter. These luminaires have the appearance of

impressive sculptures.

The luminaires for fluorescent lamps T16 R are equipped with



73

A

B

C

220 280 350 400 500

220 280 350 400 500

polished aluminium

brass

white

lamp

lumen

A

B

C

7430 7460 7370 1 QT 32 60 W 790 220 85 2007431 7461 7371 1 QT 32 75 W 1050 280 90 2607432 7462 7372 2 QT 32 60 W 1580 350 100 3257433 7463 7373 2 QT 32 75 W 2100 400 105 375

7434 7464 7374 1 TC-D 13 W 900 220 85 2007435 7465 7375 1 TC-D 18 W 1200 280 90 2607436 7466 7376 2 TC-D 18 W 2400 350 100 3257940 8298 7939 2 T16 R 22 + 55 W 6000 400 105 3757929 – 7498 3 TC-F 36 W 8400 500 130 475


Hand-blown opal glass, satin matt with thread 7929 · 7498 with twist-lock closure

Die cast aluminium fitter Surface finish options • polished aluminium • brass • white enamel RAL 9010

With 2 cable entries for through-wiring 7430 · 7460 · 7370 1 cable entry


To special order, the luminaires for fluorescent lamps TC-D and TC-F can also be supplied with an electronic ballast.

74

Ceiling and wall luminaires for halogen lamps and fluorescent lamps.

Luminaires with high-quality fitters made of die cast aluminium and

hand-blown, three-ply opal glass. The diverse dimensions and light

outputs of the luminaires allow a host of lighting tasks to be solved

with just one luminaire series.

The precise fitters and glass demonstrate the effective interaction

of glass, metal and light.


75

A

B

C

A

B

C

lamp lumen A B

7902 1 QT 32 75 W 1050 300 1107903 1 QT 32 100 W 1470 350 1107918 2 QT 32 75 W 2100 405 110

8583 1 TC-T 18 W 1200 300 1108584 1 TC-T 26 W 1800 350 1107919 2 TC-T 26 W 3600 405 110

lamp lumen A B C

7876 1 QT 32 75 W 1050 360 110 1757877 1 QT 32 100 W 1470 420 110 2258101 2 QT 32 75 W 2100 490 110 275

8590 1 TC-T 18 W 1200 360 110 1758591 1 TC-T 26 W 1800 420 110 2258592 2 TC-T 26 W 3600 490 110 275

Ceiling and wall luminaires for halogen lamps and fluorescent lamps 7876 · 7877 · 8101 8590 · 8591 · 8592 Protection class IP 55


Die cast aluminium fitter Surface finish • matt aluminium



76

IP 55

1 QT 141 QT 32

30°

120cd/klm

2 QT 32

30°

120cd/klm

1 TC-T2 TC-T

30°

120cd/klm

2 TC-D

30°

90cd/klm

1 TC-TELI2 TC-TELI

30°

120cd/klm

2 T16R

30°

72cd/klm

Luminaires in six sizes for halogen lamps and fluorescent lamps.

The opal glass is available either with a glossy or satin matt surface

finish.

High-quality, hand-blown luminaire glass of a clear, characteristic

shape. Impressive features are the high precision and distinctly

contoured glass edge.

The wide projection of the glass and an extremely flat design make

these luminaires masterpieces of craftsmanship and high aesthetic

quality.

A wafer-thin opal layer, enclosed between two crystal glass layers,

distributes the light uniformly and pleasantly in the room.

These luminaires with a host of different dimensions and efficient lamps

are indispensable instruments in good light planning.

The luminaires for fluorescent lamps TC-TELI and T16R are equipped

with electronic ballasts.

Luminaires for a maximum wattage of 42 W can also be operated at

32 W or 26 W, and luminaires for 32 W at 26 W.


satin matt glossy

77

A

B

C

240 280 330 390 460 550

240 280 330 390 460 550


Hand-blown opal glass with thread options • satin matt • glossy

Die cast aluminium fitter • white enamel RAL 9010



opal glass satin matt

opal glass glossy

lamp

lumen

A

B

C

6654 6655 1 QT 14 60 W 790 240 85 1457300 7864 1 QT 32 75 W 1050 280 105 1757301 7865 1 QT 32 100 W 1470 330 105 2257302 7866 2 QT 32 75 W 2100 390 105 2757303 7867 2 QT 32 100 W 2940 460 120 315

8557 8550 1 TC-T 18 W 1200 280 105 1758558 8551 1 TC-T 26 W 1800 330 105 2258559 8552 2 TC-T 26 W 3600 390 105 2757307 7871 2 TC-D 26 W 3600 460 120 315

8560 8553 1 TC-TELI 18 W 1150 280 105 1758561 8554 1 TC-TELI 26 W 1750 330 105 2258562 8555 1 TC-TELI 42 W 3200 390 105 2758563 8556 2 TC-TELI 32 W 4800 460 120 3158143 8142 2 T16 R 22 + 55 W 6000 550 155 375

78

1 A 60

30°

120cd/klm

2 A 603 A 60

30°

120cd/klm

1 TC-T

30°

120cd/klm

2 TC-D3 TC-D

30°

72cd/klm

1 TC-TELI

30°

120cd/klm

2 TC-TELI

30°

120cd/klm

IP 44

Interpretation of a classic. It often appears impossible to improve

on a very familiar object but we have reinterpreted this classic

luminaire shape: modern, simple and equipped with the latest lamp

technology. This series is the continuation of a long tradition.

Flat design and high light output were the objectives. The distinctly

contoured glass with wide projection over the fitter illuminates both

the installation surface and the room.

High-quality, die cast aluminium fitters conduct the heat optimally

at the highest wattage. Perfect designs in modern light planning –

timeless, robust and reliable.

The luminaires for fluorescent lamps TC-TELI are fitted with


Luminaires for a maximum wattage of 42 W can also be operated

at 32 W or 26 W, and luminaires for 32 W at 26 W.


79

A

B

C

250 300 340 390 450

250 300 340 390 450

white aluminium

white

lamp

lumen

A

B

C

8222 8212 1 A 60 75 W 935 250 100 1958223 8213 1 A 60 100 W 1340 300 115 2308224 8214 2 A 60 60 W 1420 340 130 2658225 8215 2 A 60 75 W 1870 390 150 3058226 8216 3 A 60 75 W 2805 450 175 355

8227 8217 1 TC-T 18 W 1200 250 100 1958228 8218 1 TC-T 26 W 1800 300 115 2308229 8219 2 TC-D 18 W 2400 340 130 2658230 8220 2 TC-D 26 W 3600 390 150 3058231 8221 3 TC-D 26 W 5400 450 175 355

8286 8281 1 TC-TELI 18 W 1150 250 100 1958287 8282 1 TC-TELI 26 W 1750 300 115 2308288 8283 1 TC-TELI 32 W 2400 340 130 2658289 8284 1 TC-TELI 42 W 3200 390 150 3058290 8285 2 TC-TELI 32 W 4800 450 175 355

Ceiling and wall luminaires for general service lamps and fluorescent lamps Protection class IP 44


Die cast aluminium fitter Surface finish options • white aluminium enamel RAL 9006 • white enamel RAL 9010

With 2 cable entries for through-wiring The luminaires of Ø 250 mm and Ø 300 mm have 1 cable entry.


whitewhite aluminium

80

1 TC-TELI

30°

90cd/klm

2 TC-TELI

30°

120cd/klm

1 A 60

30°

90cd/klm

2 A 603 A 60

30°

75cd/klm

IP 44

Luminaires in six sizes for general service lamps and

fluorescent lamps. The opal glass has either a satin matt

or glossy surface finish.

High-quality, hand-blown luminaire glass with a wafer-thin

opal layer, enclosed between two crystal glass layers,

distributes the light uniformly and pleasantly in the room.

These luminaires with a host of different dimensions and

efficient lamps are indispensable instruments in good light

planning.

The luminaires for fluorescent lamps TC-TELI and T16R are

equipped with electronic ballasts.

Luminaires for a maximum wattage of 42 W can also be

operated at 32 W or 26 W, and luminaires for 32 W at 26 W.


81

A

B

C

250 300200 350 400 500

250 300200 350 400 500

Ceiling and wall luminaires for general service lamps and fluorescent lamps Protection class IP 44 up to Ø 350 mm

Hand-blown opal glass with twist-lock closure options • satin matt • glossy

Metal backplate • white enamel RAL 9010



opal glass satin matt

opal glass glossy

lamp

lumen

A

B

C

3123 2460 1 A 60 60 W 710 200 110 1703124 2461 1 A 60 75 W 935 250 120 2203125 2462 2 A 60 60 W 1420 300 140 2503126 2474 2 A 60 75 W 1870 350 170 2953429 3856 3 A 60 60 W 2130 400 200 385

8569 8564 1 TC-TEL 13 W 850 200 110 1708570 8565 1 TC-TELI 26 W 1750 250 120 2208571 8566 1 TC-TELI 32 W 2400 300 140 2508572 8567 1 TC-TELI 42 W 3200 350 170 2958573 8568 2 TC-TELI 32 W 4800 400 200 3858794 8793 2 TC-TELI 57 W 8600 500 250 480

satin matt glossy

82

8772

30°

90cd/klm

87738774

30°

120cd/klm

8963

30°

90cd/klm

66336634

30°

90cd/klm

IP 44

Compact luminaires in three sizes for halogen lamps, general service lamps

and fluorescent lamps. They are designed for walls and ceilings and can

solve many tasks of interior planning and project work. This luminaire series

is characterised by diverse lamp types and light outputs, and an extremely

shallow projection.

The hand-blown, three-ply opal glass with satin matt surface finish is held by

precise fitters.

Robust and reliable lighting tools that provide perfect light over long periods

of operation.


83

150 265 305 370110

A

B

Ceiling and wall luminaires for halogen lamps, general service lamps and fluorescent lamps Protection class IP 44





lamp lumen A B

8772 1 QT 14 75 W 1050 265 70

8773 2 A 60 60 W 1420 305 808774 3 A 60 60 W 2130 370 85


84

2 TC-D

30°

75cd/klm

2 TC-DEL2 T16R

30°

75cd/klm

IP 44

Ceiling and wall luminaires in three sizes for fluorescent lamps.

These luminaires are characterised by a combination of

precise metal fitters and precious hand-blown, three-ply opal

glass, and by their shallow projection.

Their diverse dimensions and light outputs can solve a host

of lighting tasks.

These luminaires are suitable for lighting private and public

rooms, stairways and halls.


85

A

B

300 350 420

Ceiling and wall luminaires for fluorescent lamps Protection class IP 44





s/steel white lamp lumen A B

7769 7768 2 TC-D 18 W 2400 300 857773 7772 2 TC-D 26 W 3600 350 95

7771 7770 2 TC-DEL 18 W 2300 300 857775 7774 2 TC-DEL 26 W 3500 350 957977 7976 2 T16 R 22 + 40 W 5000 420 100

whitestainless steel

86

IP 44

1 QT 14

30°

90cd/klm

2 A 60

30°

96cd/klm

3 A 60

30°

120cd/klm

1 TC-TELI

30°

90cd/klm

2 TC-TELI

30°

90cd/klm

2 TC TELI 57 W

30°

120cd/klm


Interpretation of a classic. It often appears impossible to improve on a very

familiar object but we have reinterpreted this classic luminaire shape: modern,

simple and equipped with the latest lamp technology. This series is the

continuation of a long tradition.

Compact luminaires available in four sizes for halogen lamps, general service

lamps and fluorescent lamps.

This luminaire series is characterised by different lamp types, light outputs,

and a shallow projection.

The hand-blown, three-ply opal glass with a satin matt surface finish is held

by precise fitters with precious surface finishes.

Designed for walls and ceilings, these luminaires can solve many tasks of

interior planning and project work.

Aesthetic and durable elements of interior design.

stainless steel white

87

A

B

340 390 470250

s/steel chrome white lamp lumen A B

8988 8990 8992 1 QT 14 75 W 1050 250 80

8890 8896 8908 2 A 60 75 W 1870 340 908891 8897 8909 3 A 60 60 W 2130 390 1008892 8898 8910 3 A 60 75 W 2805 470 115

8989 8991 8993 1 TC-TELI 26 W 1750 250 808893 8899 8911 2 TC-TELI 26 W 3500 340 908894 8900 8912 2 TC-TELI 32 W 4800 390 1008895 8901 8913 2 TC-TELI 57 W 8600 470 115



Metal fitter Surface finish options • stainless steel • chrome • white enamel RAL 9010



8888

IP 44

88898764

30°

120cd/klm

8765

30°

90cd/klm

8766

30°

90cd/klm

8767

30°

90cd/klm

6635

30°

90cd/klm

6636

30°

72cd/klm

Luminaires in four sizes for halogen lamps, general service lamps and fluorescent

lamps.

High-quality, hand-blown luminaire glass of a clear, characteristic shape. A wafer-

thin opal layer, enclosed between two crystal glass layers, distributes the light

uniformly and pleasantly in the room.

Impressive features are the high precision and distinctly contoured glass edge.

The flat design of the glass and the wide projection over the fitter require the

highest degree of craftsmanship and define the aesthetic quality of the luminaires.

The luminaires for fluorescent lamps are fitted with electronic ballasts.


8989

A

B

C

340 390 470250

lamp lumen A B C

8889 1 QT 14 75 W 1050 250 70 170

8764 2 A 60 60 W 1420 340 85 2658765 2 A 60 75 W 1870 390 85 3008766 3 A 60 60 W 2130 470 95 360




Metal fitter • white enamel RAL 9010



90

IP 44

87628759

90cd/klm

87638760

90cd/klm

66386640

90cd/klm

66376639

90cd/klm

87618758

30°

120cd/klm

87488751

30°

120cd/klm

Luminaires in three sizes for general service lamps

and fluorescent lamps.

These luminaires are equipped with high-quality,

hand-blown luminaire glass of a clear, characteristic

shape.

The distinctly contoured glass edges, a wide

projection over the fitter and the very flat design

require the highest degree of craftsmanship, and

define the aesthetic quality of these luminaires.

Luminaires with direct and indirect light.

The luminaires for fluorescent lamps are equipped

with electronic ballasts.


91

A

B

C

360 420 500

white aluminium

white

lamp

lumen

A

B

C

8761 8758 2 A 60 60 W 1420 360 85 2658762 8759 2 A 60 75 W 1870 420 85 3008763 8760 3 A 60 60 W 2130 500 95 360

8748 8751 1 TC-TELI 26 W 1750 360 85 2656637 6639 2 TC-TELI 26 W 3500 420 85 3006638 6640 2 TC-TELI 32 W 4800 500 95 360



Metal fitter Surface finish options • white aluminium enamel RAL 9006 • white enamel RAL 9010



white aluminium white

9292

TC-TTC-D

30°

60cd/klm

TC-TELI

30°

60cd/klm

A 60D 45

30°

90cd/klm

HIE

30°

60cd/klm

IP 44

Luminaires in five sizes for general service lamps, fluorescent lamps and

discharge lamps.

This series of luminaires is distinguished by a wide selection of different lamp

types, light outputs and a shallow projection. The three-ply opal glass with satin

matt surface finish is held by massive die cast backplates made of high-quality

aluminium.

These luminaires are designed both for ceilings and walls, and can solve almost

any lighting task of interior planning and project work.

Robust and reliable lighting tools that provide perfect light over long periods of

operation.

The luminaires for fluorescent lamps TC-TELI are equipped with electronic ballasts.



93

A

B

C

160 220 300 350 390

Ceiling and wall luminaires for general service lamps, fluorescent lamps and discharge lamps Protection class IP 44


Die cast aluminium backplate • white enamel RAL 9010


The luminaires for fluorescent lamps and discharge lamps are fitted with the required ballasts.

lamp lumen A B C

8009 1 D 45 40 W 400 160 80 1308010 1 A 60 75 W 935 220 90 1958011 2 A 60 60 W 1420 300 100 2658340 2 A 60 75 W 1870 350 120 3058012 3 A 60 75 W 2805 390 120 355

8013 1 TC-T 18 W 1200 220 90 1958574 2 TC-D 18 W 2400 300 100 2658341 2 TC-D 26 W 3600 350 120 3058575 3 TC-D 26 W 5400 390 120 355

8090 1 TC-TELI 18 W 1150 220 90 1958091 1 TC-TELI 32 W 2400 300 100 2658342 1 TC-TELI 42 W 3200 350 120 3058092 2 TC-TELI 32 W 4800 390 120 355

6665 1 HIE 35 W 2850 300 100 2656666 1 HIE 70 W 6400 350 120 315

94

3161

75cd/klm

90cd/klm

3162

30°

90cd/klm

3786 3159

90cd/klm

3160

90cd/klm

8140

75cd/klm

80168017

30°

120cd/klm

8018801966636664

30°

90cd/klm

80218022

72cd/klm

80948095

72cd/klm

8023

30°

72cd/klm

8096

72cd/klm

IP 44

Luminaires for general service lamps, fluorescent lamps

and discharge lamps.

Square and rectangular. These luminaires with shallow

projection are available in different sizes. They are versatile

in use as ceiling or wall luminaires.

The rectangle can be installed vertically or horizontally.

Arranged singly or in groups, they are lighting bricks that

serve architecture by day and night. The three-ply opal

glass with satin matt surface finish is held by massive die

cast backplates made of high-quality aluminium. Robust

and reliable lighting tools that provide perfect light over long

periods of operation.

The luminaires for fluorescent lamps TC-DEL and discharge

lamps HIE are equipped with electronic ballasts.


95

A

B

C

A

B

C

lamp lumen A B C

3161 1 A 60 60 W 710 210 100 903162 2 A 60 40 W 830 300 100 1003786 3 A 60 40 W 1245 450 100 100

3159 1 TC-D 13 W 900 210 100 903160 1 TC-D 18 W 1200 300 100 1008140 1 TC-L 24 W 1800 450 100 100

rectangle

Ceiling and wall luminaires for general service lamps, fluorescent lamps and discharge lamps Protection class IP 44

Hand-blown opal glass, satin matt

Die cast aluminium backplate • white enamel RAL 9010

The luminaires for fluorescent lamps and discharge lamps are fitted with the required ballasts.

square

lamp lumen A B C

8016 1 D 45 40 W 400 160 160 908017 1 A 60 75 W 935 210 210 1208018 2 A 60 60 W 1420 280 280 1308019 4 A 60 40 W 1660 320 320 130

8021 1 TC-D 18 W 1200 210 210 1208022 1 TC-D 26 W 1800 280 280 1308023 2 TC-D 26 W 3600 320 320 130

8094 1 TC-DEL 18 W 1150 210 210 1208095 1 TC-DEL 26 W 1750 280 280 1308096 2 TC-DEL 26 W 3500 320 320 130

6663 1 HIE 35 W 2850 280 280 1306664 1 HIE 70 W 6400 320 320 130

96

87388739

30°

90cd/klm

87438744

30°

90cd/klm

8740

72cd/klm

87418742

60cd/klm

87468747

60cd/klm

IP 44

8745

72cd/klm


Interpretation of a classic. It often appears impossible to improve on

a very familiar object but we have reinterpreted this classic luminaire

shape: modern, simple and equipped with the latest lamp technology.

This series is the continuation of a long tradition.

Luminaires available in three sizes for halogen lamps, general service

lamps and fluorescent lamps. A series of impressive quality with

precise metal fitters, precious surface finishes and hand-blown three-

ply opal glass. The luminaires can be installed either on walls or

ceilings.

Protection class IP 44 is also ideal for safe operation in bathrooms.

The vibration-proof construction supports the glass on the backplate

perfectly.

These luminaires are especially suitable for arrangement in groups,

and can solve a host of interior lighting tasks. Robust and reliable

lighting tools that provide perfect light over long periods of operation.

The luminaires for fluorescent lamps TC-TELI are equipped with

electronic ballasts. Luminaires for a maximum wattage of 42 W can

also be operated at 32 W or 26 W.

97

A

B

C

A

B

C

175 200 275

surface finish s/steel chrome

lamp

lumen

A

B

C

8738 8743 1 QT 14 60 W 790 175 175 70

8739 8744 1 A 60 75 W 935 200 200 908740 8745 2 A 60 60 W 1420 275 275 95

8741 8746 1 TC-TELI 26 W 1750 200 200 908742 8747 1 TC-TELI 42 W 3200 275 275 95



Aluminium fitter Surface finish options • stainless steel • chrome



98

2 QT 32

30°

90cd/klm

1 TC-TELI 26 W

30°

90cd/klm

1 TC-TELI 42 W1 TC-TELI 57 W

30°

90cd/klm

1 QT 32

30°

90cd/klm

IP 44

Luminaires for halogen lamps and fluorescent lamps. A series of impressive

quality with precise metal fitters, exquisite surface finishes and hand-blown,

three-ply opal glass. They can be installed on walls or ceilings. The shock-

proof construction ensures that the glass is perfectly supported on the fitter.

They are also ideal for bathrooms with their protection class IP 44.

These luminaires are especially suitable for arrangement in groups.


of operation.


ballasts.


99

A

B

C

225 295 320


matt brass

lamp

lumen

A

B

C

8328 8384 8423 1 QT 32 75 W 1050 225 225 908329 8385 8424 2 QT 32 60 W 1580 295 295 1108668 8670 8672 2 QT 32 100 W 2940 320 320 125

8330 8386 8425 1 TC-TELI 26 W 1750 225 225 908331 8387 8426 1 TC-TELI 42 W 3200 295 295 1108669 8671 8673 1 TC-TELI 57 W 4300 320 320 125



Aluminium fitter Surface finish options • stainless steel • chrome • matt brass


Luminaires for fluorescent lamps with electronic ballast

8668 · 8670 · 8672 · 8669 · 8671 · 8673 wall luminaires only

100

IP 44

Ceiling and wall luminaires · 400 -1750 lumen Protection class IP 44

Ceiling and wall luminaires for general service lamps


Precise metal fitters with exquisite surface finishes.

The hand-blown, three-ply opal glass ensures uniform

light distribution.

These luminaires can be installed either on ceilings or

walls. The shock-proof construction ensures that the

glass is perfectly supported on the fitter. The luminaires

are especially suitable for arrangement in groups.

They are also ideal for bathrooms with their protection

class IP 44.

The luminaires for fluorescent lamps TC-TELI are

equipped with electronic ballasts.

101

A

B

C


lamp

lumen

A

B

C

8535 8532 1 D 45 40 W 400 120 120 1358536 8533 1 A 60 75 W 935 170 170 185

8964 8965 1 TC-TELI 26 W 1750 170 170 185






102

8347

30°

90cd/klm

8346

30°

120cd/klm

8343

30°

90cd/klm

8344

30°

120cd/klm

8407

30°

90cd/klm

8345

30°

120cd/klm

IP 65

Luminaires in three sizes for fluorescent lamps, equipped either with

conventional or electronic ballasts. High-quality reflectors and modern

lamp technology in perfect harmony make these luminaires very

economical and efficient lighting tools.

The housing components are made of corrosion-resistant die-cast

aluminium.

They can be opened and closed simply and easily thanks to a special

mechanism. The visible die-cast aluminium components are ground

individually by hand and then protected by a transparent enamel.

This produces a uniquely aesthetic surface finish which enhances the

characteristics of the material.

These compact and robust luminaires of high protection class are ideal

for many areas of interior design – and especially in locations where the

highest standards of light and material quality are required.



Luminaires for a maximum wattage of 42 W can also be operated

at 32 W or 26 W, and luminaires for 32 W also at 26 W.


103

A

C

B

210 260 320

lamp lumen A B C

8346 1 TC-T 26 W 1800 210 210 808347 2 TC-T 18 W 2400 260 260 908407 2 TC-T 26 W 3600 320 320 100




Reflector of pure anodised aluminium

Die-cast aluminium fitter • matt aluminium



104

IP 44

87238935

30°

54cd/klm

87248936

30°

72cd/klm

87208933

30°

75cd/klm

87218934

30°

90cd/klm


Luminaires in two sizes for halogen lamps and fluorescent lamps. A series

of impressive quality with precise metal fitters, exquisite surface finishes and

crystal glass of great material strength, and precise light-diffusing textures.

These luminaires can be installed on walls or ceilings. Their shock-proof

construction ensures that the glass is perfectly supported on the fitter.




of operation.


ballasts.

105

A

A

B

C

C

B



Die-cast aluminium luminaire housing

Aluminium fixing frame Surface finish options • stainless steel • chrome




lamp

lumen

A

B

C

8720 8933 1 QT 32 75 W 1050 210 210 808721 8934 1 QT 32 100 W 1470 260 260 90

8723 8935 1 TC-DEL 26 W 1750 210 210 808724 8936 1 TC-TELI 32 W 2400 260 260 90

106

IP 44

88568940

30°

72cd/klm

88578941

30°

90cd/klm

89378938

30°

120cd/klm

88538854

30°

120cd/klm

88558939

30°

90cd/klm

88588942

30°

120cd/klm


Luminaires in three sizes for halogen lamps and fluorescent lamps.

A series of impressive quality with precise metal fitters, exquisite

surface finishes and crystal glass of great material strength, and

precise light-diffusing textures. These luminaires can be installed

on walls or ceilings. Their shock-proof construction ensures that

the glass is perfectly supported on the fitter.



Robust and reliable lighting tools that provide perfect light over long




107

A

B

C

210 260 315



Die-cast aluminium luminaire housing

Aluminium fixing frame Surface finish options • stainless steel • chrome




lamp

lumen

A

B

C

8853 8937 1 QT 32 75 W 1050 210 210 808854 8938 1 QT 32 100 W 1470 260 260 908855 8939 2 QT 14 75 W 2100 315 315 100

8856 8940 1 TC-DEL 26 W 1750 210 210 808857 8941 1 TC-TELI 32 W 2400 260 260 908858 8942 1 TC-TELI 57 W 4300 315 315 100

108

IP 55

Luminaires for general service lamps and fluorescent lamps.

Luminaires made of high-quality, die-cast aluminium with crystal glass of great

material strength. Diverse dimensions and light outputs allow a host of lighting

tasks to be solved with just one luminaire series.

Fascinating precise glass and fitters in a perfect interplay of glass and metal.



109

A

C

B



Die-cast aluminium fitter Surface finish options • chrome • brass • white enamel RAL 9010



chrome brass white lamp lumen A B C

7348 7344 7340 1 A 60 75 W 935 220 220 957349 7345 7341 1 A 60 100 W 1340 270 270 105

7350 7346 7342 1 TC-D 13 W 900 220 220 957351 7347 7343 1 TC-D 26 W 1800 270 270 105

110

Luminaires in three sizes for general service lamps and fluorescent lamps.

They are made of hand-blown, three-ply opal glass and high-quality

metal fitters in four different materials.

The perfect shape of the sphere is one of the most important design

elements of all time. Its design as one of the basic geometric shapes

always gives a pleasant and clear impression.

Timelessly beautiful – pure and perfect.

Classic luminaires – the continuation of a long tradition in solving

a host of lighting tasks.

The luminaires for fluorescent lamps are equipped with electronic

ballasts. Luminaires for a maximum wattage of 42 W can also be

operated at 32 W or 26 W.

Matching pendant luminaires are given on pages 258 - 261.


111

A

B

C

200 250 300

200 250 300




The luminaires are suitable for through-wiring


s/steel chrome brass white lamp lumen A B C

8499 8487 8493 8481 1 A 60 75 W 935 200 220 1228500 8488 8494 8482 1 A 60 100 W 1340 250 275 1508501 8489 8495 8483 1 A 65 150 W 2160 300 330 180

8502 8490 8496 8484 1 TC-TELI 18 W 1150 200 220 1228503 8491 8497 8485 1 TC-TELI 26 W 1750 250 275 1508504 8492 8498 8486 1 TC-TELI 42 W 3200 300 330 180

112

C

B

A

Ceiling luminaires · 575 -1000 lumen

Ceiling luminaires for globe lamps

Fitter made of • stainless steel • brass or metal fitter • white enamel RAL 9010

Supplied without lamp

s/steel brass white lamp lumen A B

7971 7970 7969 1 G 60 60 W 575 90 757606 7605 7604 1 G 95 100 W 1000 110 85

Luminaires with perfect, precise metal fitters for globe lamps, defined by their fascinating purity.

Small luminaires in three different materials, ideal for arrangement in rows or groups.

Matching pendant luminaires are given on page 262.

113

A

B

C

A

B

C

IP 64


7579 7567 1 D 45 40 W 400 70 165 907580 7568 1 A 60 60 W 710 95 190 1207581 7569 1 A 60 75 W 935 110 230 1407582 7570 1 A 60 100 W 1340 130 260 160

7583 7571 1 TC-D 13 W 900 110 230 1407584 7572 1 TC-T 18 W 1200 130 260 160




With 2 cable entries for through-wiring 7579 · 7567 · 7561 · 7549 1 cable entry They are connected electrically by a convenient plug connection.

The luminaires for fluorescent lamps are equipped with the required ballasts.


Unshielded ceiling and wall luminaires of a high protection

class. Metal fitters in two different materials. Different

dimensions and light outputs can solve a host of lighting

tasks. The luminaires on this page are characterised by

their convenient mounting system for simple and economic

installation.


7561 7549 1 D 45 40 W 400 70 165 907562 7550 1 A 60 60 W 710 95 200 1207563 7551 1 A 60 75 W 935 110 230 1407564 7552 1 A 60 100 W 1340 130 260 160

7565 7553 1 TC-D 13 W 900 110 230 1407566 7619 1 TC-T 18 W 1200 130 260 160

114

Unshielded luminaires for the illumination of private and public rooms,

stairways and halls. Diverse dimensions and light outputs can solve

a host of lighting tasks.

Precise fitters and glass in a perfect interplay of glass, metal and light.

Both series of luminaires are available in different metal surface finishes.


115

A

B

A

B Ceiling and wall luminaires for general service lamps and fluorescent lamps Protection class IP 65Crystal glass with light-diffusing texture, inside whiteMetal fitter Surface finish options • polished chrome • brassWith 2 cable entries for through-wiring


polished chrome

brass

white

lamp

lumen

A

B

6649 4053 4052 1 D 45 40 W 400 205 1156650 4059 4055 1 A 60 60 W 710 280 1456651 4060 4056 1 A 60 100 W 1340 355 185

6652 4061 4057 1 TC-D 18 W 1200 280 1456653 4062 4058 1 TC-D 26 W 1800 355 185

polished chrome

brass

lamp

lumen

A

B

8955 8949 1 D 45 60 W 660 210 908956 8950 1 A 60 100 W 1340 270 1058957 8951 2 A 60 75 W 1870 380 115

8958 8952 1 TC-T 18 W 1200 210 908959 8953 1 TC-T 26 W 1800 270 1058960 8954 2 TC-T 26 W 3600 380 115



Metal fitter Surface finish options • polished chrome • brass • white enamel RAL 9010



116

IP 44

Since electricity was first used to illuminate living rooms,

the particularly successful shapes of ceiling luminaires have

been a familiar sight.

They became classics long ago and are increasingly used

as an expressive reference to the past.

Two luminaire series for historic or contemporary buildings

that are defined by a discernible hint of tradition.

Enclosed luminaires with hand-blown opal glass providing

uniform and soft light distribution with a high level of visual

comfort.

Ceiling luminaires · 710 - 3500 lumen

The metal fitters of the luminaires on this double page are available in three different surface finishes: chrome, brass or white enamel RAL 9010.

117

A

B

A

B

Ceiling luminaires for general service lamps and fluorescent lamps Protection class IP 44

Hand-blown opal glass with twist-lock closure




8966 7721 7719 1 A 60 60 W 710 250 1208967 7722 7720 1 A 60 75 W 935 300 125

8968 8826 8828 1 TC-TEL 13 W 850 250 1208969 8827 8829 1 TC-TELI 26 W 1750 300 125


7102 7023 7025 1 A 60 60 W 710 290 957103 4035 4039 1 A 60 75 W 935 360 1207104 4036 4040 2 A 60 75 W 1870 450 150

8970 8973 8976 1 TC-TELI 18 W 1150 290 958971 8974 8977 1 TC-TELI 26 W 1750 360 1208972 8975 8978 2 TC-TELI 26 W 3500 450 150



Cast metal fitter Surface finish options • chrome • brass • white enamel RAL 9010



118

IP 44

Illuminated mirrors

Illuminated mirrors combine luminaire and mirror in a unique way. The impressively large glass body

made of hand-blown opal glass illuminates uniformly the crystal glass mirror in its centre to perfection.

It illuminates the room and its mirror image as a light sculpture. The luminaires for fluorescent lamps

are also suitable for ceiling installation. The mirror catches the area below the luminaire, producing

a fascinating design detail.

Luminaires of protection class IP 44 – created for safe bathrooms, wellness areas and many other

areas of interior design.

The opal glass body surrounding the crystal mirror has either a square or round profile. The light and mirror effect of both are identical. These two versions allow overall coordination of design to match the installation location.

119

A B

A B

Illuminated mirror for general service lamps and fluorescent lamps Protection class IP 44


Metal backplate

• white aluminium enamel RAL 9006


lamp lumen A B

2926 4 D 45 40 W 1600 430 952927 5 D 45 40 W 2000 530 95

8961 1 T16 R 40 W 3200 430 958962 1 T16 R 55 W 4200 530 95

lamp lumen A B

2908 4 D 45 40 W 1600 430 952909 5 D 45 40 W 2000 530 95

8157 1 T16 R 40 W 3200 430 958158 1 T16 R 55 W 4200 530 95

illustration on the right

illustration on the left

120

»VARIATA 1« Wall luminaires with infinitely adjustable light

If you wish to operate VARIATA luminaires over long periods, we recommend using economical fluorescent lamps. The luminaires can be opened for relamping simply, quickly and without tools.

The design and technology of these luminaires were

based on the concept of directing the light from one

lamp – depending on the lighting task – in different

directions. The luminaire shield can be infinitely

rotated around the longitudinal axis, allowing the

light aperture to be directed either in one direction

or in the opposite direction, or in both directions as

desired (German Patent 44 20 045).

The hand-blown opal glass cylinder of the luminaires

distributes the light softly and uniformly.

To ensure a perfect light effect, the installation

location should be selected with care.

»Variata 1« is available as a wall luminaire with and

without wiring set and plug. If no appropriate power

supply is available, luminaires with wiring set should

be used.

121

A

B

C

A

B

C Wall luminaires with 3000 mm wiring set and plug for connection to a socket.

VARIATA 1

VARIATA 1 with wiring set

white

surface finish s/steel

lamp

lumen

A

B

C

4024 8121 1 QT 32 75 W 1050 340 80 100

4025 8122 1 TC-D 18 W 1200 LLB* 340 80 1008875 8874 1 TC-DEL 18 W 1150 EB** 340 80 100

white lamp lumen A B C

7048 1 QT 32 75 W 1050 340 80 100

7049 1 TC-D 18 W 1200 LLB* 340 80 100

Wall luminaires with infinitely adjustable light for halogen lamps and fluorescent lamps


Bracket made of aluminium, die cast aluminium and stainless steel Surface finish options • stainless steel • white enamel RAL 9010

Toggle switch in the luminaire


LLB* = low-loss ballast · EB** = electronic ballast

122400

750

400

750

These economical luminaires for fluorescent

lamps are available in two lengths and three

different materials.

The design and technology of these luminaires

allow the light from the lamp to be directed in

several directions. The light aperture is always

170° and can be infinitely adjusted around the

luminaire axis. The luminaires provide adjustable

light for reading, and for many areas where

the amount of light needs to be adapted to the

requirements of the situation.

The correct installation location is very important

for an optimum light effect.

If there is no appropriate power supply,

luminaires with wiring set are available.


The metal parts of the luminaires on this double page are available in three different surface finishes: stainless steel, chrome or white enamel RAL 9010.

123

A

B

C

A

B

C

surface s/steel

chrome

white

lamp

lumen

A

B

C

8453 7133 7132 1 TC-D 18 W 1200 LLB* 400 65 808876 8877 8878 1 TC-DEL 18 W 1150 EB** 400 65 80

8454 7414 7403 1 TC-L 36 W 2900 LLB* 750 70 1008879 8880 8881 1 TC-L 36 W 2900 EB** 750 70 100

Wall luminaires with 3000 mm wiring set and plug for connection to a socket.

VARIATA 2

VARIATA 2 with wiring set

surface s/steel

chrome

white

lamp

lumen

A

B

C

8455 7399 7398 1 TC-D 18 W 1200 LLB* 400 65 80

Wall luminaires with infinitely adjustable light for fluorescent lamps


Bracket made of aluminium, die cast aluminium and stainless steel Surface finish options • stainless steel • chrome • white enamel RAL 9010



A space of 50 % of the overall length -A- is necessary on the side of the luminaire to allow for relamping.


124

The metal parts of the luminaires on this double page are available in three different surface finishes: chrome, gold or white enamel RAL 9010.


Economical luminaires for fluorescent lamps

available in three different materials.

The two glass elements of the luminaire can be

infinitely adjusted independently of each other.

The light aperture of the shielded opal glass

is always 180°, and can be adjusted 360°

around the luminaire axis. The luminaires

provide adjustable light for many areas where

the amount of light needs to be adapted to the

requirements of the situation.

The luminaires are simple to open without tools

(German Patent 44 20 045).

125

B

A C

chrome gold white lamp lumen A B C

7670 7671 7669 2 TC-D 18 W 2400 LLB* 540 70 95

Wall luminaires with infinitely adjustable light for fluorescent lamps

Two hand-blown glass elements with thread

Bracket made of aluminium, die cast aluminium and stainless steel Surface finish options • chrome • gold, 24 carat • white enamel RAL 9010



Installation surface 145 x 50 mm in the centre of the luminaire

LLB* = low-loss ballast

126

The luminaires on this double page can be installed in the burning position shown. We supply the metal parts either on the left or right of the glass.

Economical luminaires for general service lamps

and fluorescent lamps in three different materials

– installation surface either on the left or right of

the glass. The luminaires can also be installed

vertically.

The light aperture of the shielded opal glass is

always 180°, and can be infinitely adjusted 360°

around the luminaire axis.

The luminaires provide adjustable light for many

areas where the amount of light needs to be

adapted to the requirements of the situation.

The luminaires are simple to open without tools

(German Patent 44 20 045).


127

B

AC A C

B

B

AC A C

B VARIATA 3 · bracket on the right


8047 8048 8046 1 C 35 40 W 400 285 70 90

7521 7522 7519 1 TC-D 18 W 1200 LLB* 285 70 90

VARIATA 3 · bracket on the left


8044 8045 8043 1 C 35 40 W 400 285 70 90

7118 7117 7116 1 TC-D 18 W 1200 LLB* 285 70 90

bracket on the left bracket on the right

Wall luminaires with infinitely adjustable light for general service lamps and fluorescent lamps


Bracket made of aluminium, die cast aluminium and stainless steel Surface finish options • chrome • gold, 24 carat • white enamel RAL 9010



Installation surface 80 x 50 mm left or right

LLB* = low-loss ballast

128

Wall luminaires in three sizes for halogen lamps and

fluorescent lamps.

These luminaires are impressive for the way they distribute

the light pleasantly and effectively. Hand-blown, three-ply

opal glass, in which a wafer-thin opal glass layer is enclosed

between two crystal glass layers, distributes the light softly

and uniformly.

Metal shields in four different surface finishes suppress glare

to the front of the luminaires, and direct the light upwards

and downwards.

Protection class IP 44 is also ideal for safe operation in

bathrooms.

These luminaires set design accents with light – singularly

or in groups.

Wall luminaires for light in two directions 1050 - 2400 lumen · Protection class IP 44

The metal shields of the wall luminaires on this double page are available in four different surface finishes: stainless steel, chrome, brass or white enamel RAL 9010.

129

A

B

C

400300260

IP 44

s/steel chrome brass white lamp lumen A B C

7607 7159 7158 7157 1 QT 32 75 W 1050 260 80 1157608 7195 7194 7193 1 QT 32 100 W 1470 300 90 1307609 8410 8408 7613 2 QT 32 60 W 1580 400 90 110

7610 7162 7161 7160 1 TC-D 18 W 1200 260 80 1157611 7198 7197 7196 1 TC-D 26 W 1800 300 90 1307612 8411 8409 7614 2 TC-T 18 W 2400 400 90 110

Wall luminaires for halogen lamps and fluorescent lamps Protection class IP 44


Metal parts · Metal shield Surface finish options • stainless steel • chrome • brass • white enamel RAL 9010


To special order, we can also supply these luminaires with punched numbers or letters – as indication or location luminaires.

130

polished stainless steel matt aluminium

Wall luminaires for light in two directions 710 - 3500 lumen · Protection class IP 44

Wall luminaires in three sizes for general service lamps


These luminaires are impressive for the way they

distribute the light pleasantly and effectively. Hand-

blown, three-ply opal glass, in which a wafer-thin opal

glass layer is enclosed between two crystal glass layers,

distributes the light softly and uniformly.

Luminaires with metal parts made of die cast aluminium,

and extremely precise metal shields, available in matt

aluminium or aluminium with a fascinating highly polished

stainless steel inlay.

Protection class IP 44 also makes this series ideal for

safe operation in bathrooms.

These luminaires set design accents with light – singularly

or in groups.

131

IP 44

465315225

A

B

C

polished s/steel

matt aluminium

lamp

lumen

A

B

C

8732 8712 1 A 60 60 W 710 225 100 1008733 8713 2 A 60 40 W 830 315 100 1108734 8714 3 A 60 40 W 1245 465 100 110

8735 8715 1 TC-DEL 18 W 1150 225 100 1008736 8716 1 TC-DEL 26 W 1750 315 100 1108737 8717 2 TC-DEL 26 W 3500 465 100 110

Wall luminaires for general service lamps and fluorescent lamps Protection class IP 44


Metal parts made of die cast aluminium · Metal shield Surface finish options • polished stainless steel • matt aluminium


132

Unshielded luminaires in four lengths for halogen lamps and fluorescent lamps.

Open wall luminaires with a high level of efficiency and fascinating light graphics.

This series is distinguished by different light outputs and luminaire lengths as well

as a lightweight appearance with rectangular glass section.

Impressive luminaire glass made of hand-blown, three-ply opal glass makes these

luminaires aesthetic elements of interior design. These are robust and reliable

lighting tools that provide perfect light over long periods of operation thanks to

modern lamp technology and perfect craftsmanship.

Unshielded wall luminaires · 790 - 3160 lumen

133

A

C

B

D

155

290

425

560

lamp lumen A B C D

8674 1 QT 14 60 W 790 100 155 90 358675 2 QT 14 60 W 1580 100 290 90 358676 3 QT 14 60 W 2370 100 425 90 358677 4 QT 14 60 W 3160 100 560 90 35

8678 1 TC-SEL 11 W 900 100 290 115 358679 1 TC-L 24 W 1800 100 425 115 358680 1 TC-L 36 W 2900 100 560 115 35

Wall luminaires for halogen lamps and fluorescent lamps


Metal bracket • matt aluminium


A space of about 80 % of the luminaire length - B - is necessary above the luminaire to allow for relamping.

134

Unshielded wall luminaires · 790 -1750 lumen

Wall luminaires in two sizes for halogen lamps and fluorescent lamps.

These luminaires are characterised by their pleasant light effect.

Hardly visible, extremely precise aluminium brackets hold the precious

luminaire glass and give it a lightweight appearance.

Hand-blown, three-ply opal glass, in which a wafer-thin opal glass layer

is enclosed between two crystal glass layers, distributes the light softly

and uniformly.

High-quality luminaires and durable elements of interior design.

135

A

B

C

D

lamp lumen A B C D

8692 1 QT 14 60 W 790 150 160 90 608693 1 QT 18 100 W 1470 210 220 90 60

8694 1 TC-DEL 26 W 1750 210 220 100 60





136

IP 44

Unshielded wall luminaires · 1470 - 3500 lumen Protection class IP 44

Wall luminaires for halogen lamps and fluorescent lamps.

These luminaires are distinguished by their pleasant distribution of the light and their extremely

precise brackets. The brackets surrounding the luminaire glass made of aluminium are ground

by hand and partially polished. A highly sophisticated form of processing which shows off the great

material thickness to advantage.

They are aesthetic and durable elements of interior design. Robust and reliable lighting tools that

provide perfect light over long periods of operation thanks to modern lamp technology and perfect

craftsmanship.

Protection class IP 44 also makes these luminaires ideal for safe operation in bathrooms.

Luminaires for good light design – singularly or in groups.

137

A

B

C

D

lamp lumen A B C D

8726 1 QT 18 100 W 1470 220 225 110 60

8727 2 TC-DEL 26 W 3500 220 225 110 60



Metal bracket • matt aluminium, partially polished


138

Wall luminaires with finely structured, matt crystal glass of great material thickness

and precise stainless steel brackets.

Perfection in detail – impressive luminaires when viewed both from above and below.

Well designed holders for general service lamps and fluorescent lamps round off the

overall exquisite impression.

These luminaires set design accents with light – singularly or in groups.


page 50 page 270

139

B

A

C

lamp lumen A B C

8172 1 D 45 60 W 660 160 170 808173 1 A 60 100 W 1340 205 220 105

8365 1 TC-DEL 18 W 1150 205 220 105

Wall luminaires for general service lamps and fluorescent lamps

Crystal glass with light-diffusing texture, satin matt



140

Wall luminaires in two sizes for halogen lamps.

These luminaires are characterised by their pleasant and striking light graphics.

Hardly visible brackets hold the precious luminaire glass and give it a lightweight

appearance.

Hand-blown, three-ply opal glass, in which a wafer-thin opal glass layer is enclosed

between two crystal glass layers, distributes the light softly and uniformly.

High-quality luminaires and durable elements of interior design.


141

C

A

B

lamp lumen A B C

8449 1 QT 14 60 W 790 100 100 1358450 1 QT 14 75 W 1050 140 140 175

Wall luminaires for halogen lamps


Metal bracket Surface finish • stainless steel

Installation surface 80 x 30 mm

142

Fascination »black glass« Wall luminaires made of hand-blown three-ply opal glass 790 -1050 lumen

Unshielded wall luminaires for halogen lamps, either with white or black opal glass.

Hand-blown glass comprising three different glass layers.

The white luminaires have a white opal layer, providing transparency and pleasant light distribution.

The luminaires are distinguished by the effective interplay of reflected and uniformly translucent light.

The black luminaires have a black opal layer which makes the glass almost opaque.

Its outer layer of matt black glass makes this precious material appear jet black during the day.

A fascinating spectrum of colours is produced in the light of the lamps, ranging from jet black to

discreet dark blue. These luminaires produce a distinctive, high-contrast effect and interesting light

graphics.

The glass of both types of luminaire opens towards the installation surface.

Depending on the reflectance of the installation surface, the light is reflected softly and uniformly.


143143

A

B

C

black opal glass

lamp lumen A B C

8451 1 QT 14 60 W 790 120 265 1858452 1 QT 14 75 W 1050 155 325 230

white opal glass

lamp lumen A B C

8412 1 QT 14 60 W 790 120 265 1858413 1 QT 14 75 W 1050 155 325 230


Hand-blown opal glass • white three-ply glass • black three-ply glass, satin matt



The luminaires may only be installed in the burning position shown.

144

Unshielded wall luminaires with adjustable light 790 -1750 lumen

These wall luminaires are distinguished by the effective interplay of reflected and uniformly

translucent light.

The opening of the opal glass can be rotated in any direction. Part of the light is reflected towards

the installation surface softly and uniformly depending on the surface’s reflectance. If the opening is

towards the room, the illuminated opal glass produces a vivid effect. These luminaires can illuminate

private and public areas if halogen lamps or fluorescent lamps are used.

The luminaires are part of a new group of wall, ceiling and pendant luminaires which are impressive

for their material quality and technical elegance.

Corresponding pendant luminaires are given on page 227, ceiling luminaires on page 49, and

recessed ceiling luminaires on page 27.

145

360°

A

B

C

Wall luminaires with adjustable light for halogen lamps and fluorescent lamps

Hand-blown opal glass, satin matt with thread · 360° adjustable

Metal bracket • white aluminium enamel RAL 9006



lamp lumen A B C

8434 1 QT 26 60 W 790 110 310 1358435 1 QT 32 75 W 1050 150 390 165

8436 1 TC-TELI 26 W 1750 150 390 165

146

Unshielded wall luminaires in two sizes for general service lamps and fluorescent lamps.

These luminaires are impressive for their striking light effect. Hand-blown, three-ply opal glass,

in which a wafer-thin layer of opal glass is enclosed between two crystal glass layers, distributes

the light softly in the room with a high level of visual comfort.

Hardly visible, fine aluminium fitters hold the precious luminaire glass. The light is reflected from

the wall surface indirectly through the glass which is open to the top. It is distributed into the

room through the three glass layers pleasantly and uniformly without glare.

Luminaires for sophisticated light design – arranged singularly or in groups.



pendant luminaires page 264

147

A

B

C


Open hand-blown opal glass

Metal fitter • matt aluminium

Stainless steel glass connection


The luminaires can only be installed as illustrated.

lamp lumen A B C

8097 1 C 35 60 W 660 105 210 758098 1 A 60 100 W 1340 160 325 110

8099 1 TC-D 26 W 1800 160 325 110

148

Unshielded wall luminaires in three sizes for halogen lamps.

These luminaires are impressive for their striking light effect. Hand-blown, three-ply opal glass, in which a

wafer-thin layer of opal glass is enclosed between two crystal glass layers, distributes the light softly in the

room with a high level of visual comfort.

The functional lines of the glass and the different spacing between lamp and glass create delicate shades

of light which are indirectly reflected by the wall surface.

Arranged singularly or in groups, these luminaires are suitable for a host of lighting tasks, providing good

design and festive light. Matching pendant luminaires are given on page 277.


149

A

B

C



Metal backplate • matt aluminium

Stainless steel glass connection

lamp lumen A B C

8443 1 QT 26 60 W 790 190 350 958444 1 QT 32 100 W 1470 235 440 1158445 1 QT 32 150 W 2400 320 560 160

150

Unshielded wall luminaires in three sizes for general service lamps


Luminaires with hand-blown, three-ply opal glass and metal fitters in

four different surface finishes.

As single luminaires on walls and pillars or arranged in groups, they

are good elements of interior design.


151

A

B

C A

B

C

485

300220


Enclosed hand-blown opal glass, satin matt




brass

white

lamp

lumen

A

B

C

8869 7320 7316 7312 1 A 60 60 W 710 130 220 908870 7321 7317 7313 2 A 60 60 W 1420 160 300 100

8871 7322 7318 7314 1 TC-D 13 W 900 LLB* 130 220 908872 7323 7319 7315 1 TC-D 26 W 1800 LLB* 160 300 1008873 8782 8783 8784 1 TC-L 36 W 2900 EB** 190 485 115


152

Powerful, unshielded luminaires in three sizes for halogen lamps, general service lamps and fluorescent lamps.

Luminaires with hand-blown, three-ply opal glass, in which a wafer-thin layer of opal glass is enclosed between two

crystal glass layers. This produces highly translucent but opaque glass that distributes the light very uniformly, and

this is especially enhanced by the large surface of the luminaire glass.

Robust and reliable lighting tools that provide perfect light over long periods of operation. Perfectly proportioned and

impressive glass makes these luminaires long-lasting aesthetic elements of interior design.

The luminaires for fluorescent lamps are equipped with electronic ballasts. Luminaires for a maximum wattage of 42 W

can also be operated at 32 W or 26 W.


Unshielded wall luminaires with high light outputs · 1050 - 5200 lumen

153

A

B

C

115 160 185

Wall luminaires for halogen lamps, general service lamps and fluorescent lamps


Aluminium bracket • white aluminium enamel RAL 9006



lamp lumen A B C

8511 1 QT 32 75 W 1050 115 230 1258512 1 A 60 100 W 1340 160 285 1708513 1 A 65 150 W 2160 185 335 195

8446 1 TC-DEL 18 W 1150 115 230 1258447 1 TC-TELI 42 W 3200 160 285 1708448 1 TC-TELI 70 W 5200 185 335 195

154

A

B

C


surface finish s/steel brass

white

lamp

lumen

A

B

C

8155 3846 3848 1 A 60 60 W 710 320 220 1708156 3847 3849 1 A 60 75 W 935 400 290 210

Wall luminaires for general service lamps

Open crystal glass, satin matt, inside white

Metal bracket Surface finish options • stainless steel • brass • white enamel RAL 9010

Two groups of luminaires with open glass providing unshielded light. The design of these luminaires is defined by the

perfect functional lines of glass and metal. Arranged singularly or in groups, they are suitable for a host of lighting tasks

where festive light is required.

Pendant luminaires to match the luminaires on page 154 are given on page 273, and pendant luminaires to match the

luminaires on page 155 are given on page 276.

155

CA

DB

C

B



Metal bracket Surface finish options • stainless steel • brass


lamp

lumen

A

B

C

D

7945 7947 1 A 60 100 W 1340 120 500 145 80

156

A

B

C

Two wall luminaires with a common design concept – in different

sizes, providing unshielded light.

The hand-blown opal glass distributes the light softly and

uniformly in the room and onto the mounting surface.

Robust and reliable lighting tools that provide very economical

light over long periods of operation thanks to modern technology,

excellent materials and workmanship.


Wall luminaires for general service lamps, halogen lamps and fluorescent lamps


Metal fitter made of • stainless steel • brass


s/steel brass lamp lumen A B C

7692 7691 1 C 35 60 W 660 330 120 1057735 7734 1 QT 32 100 W 1470 420 160 130

7796 7795 1 TC-D 26 W 1800 420 160 130

157

A

B

CWall luminaires for halogen lamps


Frame made of • stainless steel • brass

s/steel brass lamp lumen A B C

7686 7685 1 QT 26 60 W 790 300 90 1107714 7713 1 QT 32 100 W 1470 390 110 130

158

Wall luminaires in three sizes for general service lamps or fluorescent lamps.

Luminaires with enclosed, hand-blown opal glass, providing either unshielded or shielded light.

The unshielded luminaires are characterised by their pure white opal glass with satin matt surface

finish. The light from the lamps is distributed softly and uniformly onto the mounting surface and

into the room.

The shielded luminaires are equipped with a metal shield which is available in different surface

finishes. This screens the light to the room and creates interesting light distribution on the wall.

Wall luminaires · Unshielded or shielded · 710 - 4300 lumen

159

B

A C

A

B

C

245 340 430

Shielded wall luminaires for general service lamps and fluorescent lamps

Enclosed hand-blown opal glass with metal shield

Surface finish of metal shield options • chrome • brass • white enamel RAL 9010


Unshielded wall luminaires for general service lamps and fluorescent lamps




Luminaires 4001 and 4002 can only be installed as illustrated.

lamp lumen A B C

4000 1 A 60 60 W 710 245 110 1254001 1 A 60 100 W 1340 340 150 1754002 2 A 60 75 W 1870 430 190 220



3917 3911 3905 1 A 60 60 W 710 245 115 1253918 3912 3906 1 A 60 100 W 1340 340 155 1753919 3913 3907 2 A 60 75 W 1870 430 195 220


Luminaires 3918 · 3919 · 3912 · 3913 · 3906 · 3907 can only be installed as illustrated.

160

Wall luminaires in three sizes for general service lamps or fluorescent

lamps. Luminaires with enclosed, three-ply opal glass, providing

either unshielded or shielded light.

The unshielded luminaires are characterised by their pure white opal

glass with satin matt surface finish.

The light from the lamps is distributed softly and uniformly onto the

mounting surface and into the room.

The shielded luminaires are equipped with a metal shield which is

available in different surface finishes. This screens the light to the

room and creates interesting light distribution on the wall.

Wall luminaires · Unshielded or shielded 710 - 4300 lumen

161

A

B

C

A

B

C

250 350 450

Unshielded wall luminaires for general service lamps and fluorescent lamps




The luminaires for general service lamps can only be installed as illustrated.

Shielded wall luminaires for general service lamps and fluorescent lampsEnclosed hand-blown opal glass with metal shieldSurface finish of metal shield options • matt aluminium • brass • white enamel RAL 9010Luminaires for fluorescent lamps with built-in electronic ballastThe luminaires for general service lamps can only be installed as illustrated.

matt aluminium

brass

white

lamp

lumen

A

B

C

8123 3976 3975 1 A 60 60 W 710 250 120 1308124 3875 3870 1 A 60 100 W 1340 350 165 1758125 3876 3871 2 A 60 75 W 1870 450 200 220


lamp lumen A B C

3974 1 A 60 60 W 710 250 120 1303865 1 A 60 100 W 1340 350 165 1753866 1 A 60 100 W 1340 450 200 220

6631 1 TC-TELI 32 W 2400 350 165 1756632 1 TC-TELI 57 W 4300 450 200 220

162

A

B

C

Luminaires in three sizes for general service lamps, halogen lamps and fluorescent lamps.

High-quality luminaire glass, in which a wafer-thin layer of opal glass is enclosed between two crystal glass layers,

distributes the light uniformly and pleasantly in the room. Arranged singularly or in groups, these luminaires are

ideal for a host of lighting tasks where good design and festive light is required.


Wall luminaires · 710 -1800 lumen


Enclosed hand-blown opal glass

Metal bracket Surface finish options • stainless steel • brass • white enamel RAL 9010



white

lamp

lumen

A

B

C

8150 1772 1769 1 QT 32 60 W 790 180 200 1008151 7019 7017 1 QT 32 75 W 1050 220 260 1208152 1773 1770 1 QT 32 100 W 1470 260 295 140

8153 7020 7018 1 TC-D 18 W 1200 220 260 1208154 1774 1771 1 TC-D 26 W 1800 260 295 140

163

A

B

C

290 350 450



Metal bracket Surface finish options • stainless steel • chrome • brass • white enamel RAL 9010



brass

white

lamp

lumen

A

B

C

8820 3998 3996 3994 1 A 60 60 W 710 290 180 1508821 3972 3671 3667 1 A 60 75 W 935 350 220 1858822 8882 3672 3668 1 A 60 100 W 1340 450 280 235

8823 3999 3997 3995 1 TC-D 13 W 900 290 180 1508824 3973 3673 3669 1 TC-D 18 W 1200 350 220 1858825 8883 3674 3670 1 TC-D 26 W 1800 450 280 235

164

Unshielded wall luminaires in three sizes for general service lamps and

fluorescent lamps.

These luminaires are impressive for their striking light effect. Hand-

blown, three-ply opal glass, in which a wafer-thin layer of opal glass is

enclosed between two crystal glass layers, distributes the light softly

with a high level of visual comfort.

Hardly visible, elegant fitters in three surface finishes hold the precious

luminaire glass.

The light is distributed through the enclosed glass uniformly and

pleasantly in the room without glare. Luminaires for high-quality light

design – arranged singularly or in groups.


165

B

A C

270 350 450





The luminaires can only be installed as illustrated.


3968 3603 3597 1 A 60 60 W 710 270 135 1453969 3604 3598 2 A 60 75 W 1870 350 175 1856621 3605 3599 2 A 60 100 W 2680 450 225 235


166

IP 44

Unshielded wall luminaires · 935 -2400 lumen Protection class IP 44

Unshielded wall luminaires in two sizes for general service lamps and

fluorescent lamps.

High-quality luminaire glass, in which a wafer-thin layer of opal glass

is enclosed between two crystal glass layers, distributes the light

uniformly and pleasantly in the room.

These luminaires are designed for a host of applications – arranged

singularly or in groups – for interiors and bathrooms.

167

B

A C





lamp lumen A B C

3147 1 A 60 75 W 935 200 160 1153780 1 A 60 100 W 1340 220 220 130

8924 1 TC-TELI 18 W 1150 200 160 1158925 1 TC-TELI 32 W 2400 220 220 130

168

IP 44

Luminaires in two sizes for halogen lamps and fluorescent lamps. A series of striking

quality with precise die-cast aluminium fitters, different surface finishes and thick-walled

crystal glass.

Available in protection class IP 44, they are also ideal and safe for use in bathrooms.

Especially suitable for arrangement in groups, these luminaires are robust and reliable

lighting tools that provide perfect light over long periods of operation.


169

A

B

C


Crystal glass, inside white

Die-cast metal fitter Surface options • chrome • gold, 24 carat • white enamel RAL 9010



Installation in any desired position.


7165 7164 7163 1 QT 32 75 W 1050 290 120 1607219 7218 7217 1 QT 32 100 W 1470 340 140 170

7169 7168 7167 1 TC-D 18 W 1200 290 120 1607223 7222 7221 1 TC-D 26 W 1800 340 140 170

170170

B

A

Variations of the sphere. Two wall luminaires with

a common design concept but diverse light effect.

Luminaires for general service lamps or fluorescent

lamps.

Hand-blown, three-ply opal glass with high-quality

metal brackets.

The shape of the sphere is one of the most

important design elements of all time.

Its design as one of the basic geometric shapes

always gives a pleasant and clear impression.

Timelessly beautiful – pure and perfect.

Matching wall luminaires and ceiling luminaires are

given on page 110, matching pendant luminaires

on pages 258 - 261.

Unshielded wall luminaires 935 - 3200 lumen



Die-cast metal bracket • white enamel RAL 9010


lamp lumen A B

4047 1 A 60 75 W 935 190 2103298 1 A 60 100 W 1340 250 2703299 1 A 65 150 W 2160 350 375

8994 1 TC-TELI 26 W 1750 250 2708995 1 TC-TELI 42 W 3200 350 375

171

A

B

C

innen?


Open, hand-blown opal glass, satin matt

Die-cast metal bracket • white enamel RAL 9010

lamp lumen A B C

3300 1 A 60 100 W 1340 250 110 2703301 1 A 65 150 W 2160 350 160 375

172

A

B

C

C



Aluminium bracket Surface finish options • chrome • gold, 24 carat • white enamel RAL 9010


Two series of open wall luminaires, designed according to the

same principle of construction. Exact, linear aluminium brackets

with perfect surface finishes support three-ply opal glass that is

open to the top and bottom.

The glass of the luminaires on page 172 can be installed so

the larger light opening is directed either upwards or downwards.

Unshielded wall luminaires 660 -1750 lumen


7830 7832 7828 1 C 35 60 W 660 120 210 907831 7833 7829 1 A 60 100 W 1340 150 250 110

173

A

B

A

C

B

C

B



Aluminium bracket Surface finish options • chrome • gold, 24 carat • white enamel RAL 9010



The luminaires in this series can be mounted in the corners of a room with a corner bracket Corner mounting brings light to corners and allows two walls to be well illuminated from one light source.


7836 7838 7834 1 C 35 60 W 660 120 195 757837 7839 7835 1 A 60 100 W 1340 160 220 100

7841 7842 7840 1 TC-DEL 26 W 1750 160 380 100

bracket

50585053

5053

174

A

B

IP 44

Wall and ceiling luminaires for general service lamps Protection class IP 44


Die-cast metal fitter Surface finish options • chrome • gold, 24 carat • white enamel RAL 9010

chrome gold white lamp lumen A B

2286 2287 3346 1 D 45 40 W 400 150 120

Enclosed luminaires for a host of applications – arranged singularly or in groups –

for interior applications or for bathrooms.

Two luminaire series are available in different materials.

High-quality metal fitters combined with hand-blown, three-ply opal glass make the

luminaires long-lasting and aesthetic elements of interior design.

The luminaires on page 174 can also be used as ceiling luminaires.


chrome white

175

A

B

C






3684 3683 3685 1 A 60 75 W 935 140 260 1007100 7098 7096 1 A 60 100 W 1340 150 310 100

3858 3686 3687 1 TC-D 13 W 900 140 260 1007101 7099 7097 1 TC-D 18 W 1200 150 310 100

176

IP 44

Enclosed luminaires with hand-blown three-ply opal glass,

in which a wafer-thin opal layer is enclosed between two

crystal glass layers. This produces a highly translucent but

opaque glass that distributes the light which is neutral in

colour very uniformly.

Two luminaire series are available in different materials.

A bracket made of high-quality coated synthetic material

makes installation simple and fast.

The system with protective insulation allows use of the

luminaires wherever an installation of Safety class II 2 is

prescribed.

Luminaires for a host of applications – arranged singularly

or in groups – for interiors or bathrooms.

Unshielded wall luminaires Protection class IP 44 · Safety class II 2

A bracket made of high-quality coated synthetic material makes installation simple and fast. The system with protective insulation allows use of the luminaires wherever an installation of Safety class II 2 is prescribed. Luminaires for a host of applications – arranged singularly or in groups – for interiors or bathrooms.

177

B

CA

B

CA

Wall luminaires for general service lamps Protection class IP 44 · Safety class II 2

Hand-blown opal glass 3225 hand-blown opal glass, satin matt

Bracket Surface finish options • chrome • gold, 24 carat • white RAL 9010


7985 7986 7984 1 A 60 60 W 710 95 280 150


3226 3345 3225 1 A 60 60 W 710 115 235 150

gold white

178

IP 44

Wall luminaires · Unshielded or infinitely adjustable 460 - 790 lumen · Protection class IP 44

Wall luminaires, either unshielded or infinitely adjustable.

Highest quality luminaires with die-cast metal bracket and hand-blown

opal glass.

The precious three-ply opal glass distributes the light from the lamps,

which is neutral in colour, softly and uniformly. The luminaires on

page 178 are equipped with a shield and can be infinitely rotated.

The amount of light can be changed as required. Wall luminaires for

a host of applications.

The high protection class IP 44 opens up a broad field of application

in areas where this protection class is prescribed – for example in

bathrooms. Special regulations apply here to protect people from

electric shock. Luminaires installed in defined areas for tap connections

must have protection class IP 44.

179

C

B

D

A

C

B

D

A

A

C

B

D

A

C

B

D

A

A

unshielded wall luminaires

surface s/steel

chrome

gold

lamp

lumen

A

B

C

D

8355 8354 8353 1 QT 26 40 W 460 50 235 95 708369 8368 8367 1 QT 26 60 W 790 60 285 100 70

surface s/steel

chrome

lamp

lumen

A

B

C

D

8703 8704 1 QT 26 60 W 790 75 285 110 70

infinitely adjustable wall luminaires · see p. 178

Unshielded or infinitely adjustable wall luminaires for halogen lamps Protection class IP 44


Die-cast metal bracket Surface finish options • stainless steel • chrome • gold, 24 carat

8703 · 8704 hand-blown opal glass, glossy

Die-cast metal bracket, with metal shield Surface finish options • stainless steel • chrome Light output 160°, can be infinitely rotated 360°

The simple and perfect mounting system of the wall luminaires makes installation simple and fast. The system also allows easy adjustment of the luminaires after installation.

180

A

C

D

B

IP 44

wall luminaires for horizontal installation

Wall luminaires with the same technical features as those on page 181 but designed for horizontal installation and with a greater protrusion -C-.

surface s/steel

chrome

gold

lamp

lumen

A

B

C

D

8598 8597 8596 2 QT 26 40 W 920 50 400 160 708601 8600 8599 2 QT 14 60 W 1580 60 500 170 70


Wall luminaires, designed for vertical or horizontal installation.

Highest quality luminaires with die-cast metal bracket and hand-

blown, satin matt opal glass.

The precious three-ply opal glass distributes the light from the

lamps, which is neutral in colour, softly and uniformly.

The luminaires on page 180 have a greater protrusion than

the luminaires on page 181. They are particularly suitable for

installation e.g. above mirrors or shelves.

The high protection class IP 44 opens up a broad field of

application in areas where this protection class is prescribed – for

example in bathrooms. Special regulations apply here to protect

people from electric shock. Luminaires installed in defined areas

for tap connections must have protection class IP 44.

181

C

B D

A

C

BD

A

Wall luminaires for halogen lamps Protection class IP 44


Die cast metal bracket Surface finish options • stainless steel • chrome • gold, 24 carat

wall luminaires for vertical installation

surface s/steel

chrome

gold

lamp

lumen

A

B

C

D

8372 8371 8370 2 QT 26 40 W 920 50 400 95 708375 8374 8373 2 QT 14 60 W 1580 60 500 100 70

182

A

B

C

IP 44



Metal parts Surface finish options • chrome • gold, 24 carat • white enamel RAL 9010


A space of approx. 80 % of the luminaire length - B - must be provided above the luminaire to allow relamping.

Unshielded wall luminaires for general service lamps and fluorescent lamps.

Luminaires of impressive quality – with hand-blown, three-ply opal glass, precise metal parts,

and precious surface finishes.


Luminaires designed for many interior lighting tasks – arranged singularly or in groups.

These are robust and reliable lighting tools that provide perfect light over long periods of operation.

Wall luminaires · 400 - 2900 lumen Protection class IP 44


7248 7244 7240 1 QT 32 100 W 1470 110 310 907249 7245 7241 2 QT 32 75 W 2100 150 460 110

7250 7246 7242 1 TC-D 26 W 1800 110 310 907251 7247 7243 1 TC-L 36 W 2900 150 460 110

183

A

B

C

C


7745 7743 1 C 35 40 W 400 70 220 100

7708 7706 1 TC-S 11 W 900 70 320 1007913 7911 1 TC-D 26 W 1800 95 350 125


Hand-blown opal glass, with thread

Aluminium fitter • polished stainless steel or metal fitter • white enamel RAL 9010


184

Unshielded wall luminaires with cylindrical glass and different

light outputs.

Equipped either with partially frosted crystal glass or brilliant

antique crystal glass.

The partially frosted crystal glass distributes the luminance

pleasantly without affecting the aesthetics of the clear glass.

The beauty and brilliance of the antique crystal glass are

most effectively set off by a clear general service lamp.

Air inclusions of diverse shape and size in the glass make

each luminaire a unique example of the glassmaker’s

art. These luminaires produce brilliant light of exceptional

expressiveness.

Ceiling luminaires and pendant luminaires that match these

luminaires are given on the following pages:

Ceiling luminaires - pages 54 · 56

Pendant luminaires - pages 236 · 248

Unshielded wall luminaires 710 - 3200 lumen

185

B

A C

B

A C

360410

300

110 140 160

s/steel lamp lumen A B C

8699 1 A 60 60 W 710 110 300 1308700 1 A 60 100 W 1340 140 360 1608701 1 A 65 150 W 2160 160 410 180




Metal bracket Surface finish options • chrome • brass


antique crystal glass

Wall luminaires for general service lamps and fluorescent lampsCrystal glass, partially frostedStainless steel bracketLuminaires for fluorescent lamps with built-in electronic ballastInstallation surface 80 x 30 mm

partially frosted crystal glass

chrome brass lamp lumen A B C

8943 8946 1 A 60 60 W 710 110 300 1308944 8947 1 A 60 100 W 1340 140 360 1608945 8948 1 A 65 150 W 2160 160 410 180

186

B

A

B

A

C

C

B

A

C

8242

45°

280cd/klm

82438244

45°

400cd/klm


Two hand-blown crystal glass elements with thread

Reflectors of pure anodized aluminium

Built-in annular shields

Metal bracket • white aluminium enamel RAL 9006

Please use Osram 64481 AM lamps only for luminaire 8242

8242 · 8243 installation surface 80 x 30 mm 8244 installation surface 100 x 40 mm

These luminaires with built-in reflectors provide directed and unshielded

light.

Two of the reflectors of pure aluminium connected to the glass direct most

of the light upwards and downwards.

The unshielded part of the light, which exits between the reflector and

lamp base, produces brilliant light graphics on the wall.

Excellent lighting tools to illuminate walls, pillars and architectural details –

whether arranged singularly or in groups.

Wall luminaires with reflectors · Light in two directions 1580 - 2940 lumen

lamp lumen A B C

8242 2 QT 18 60 W 1580 95 255 1208243 2 QT 32 75 W 2100 125 310 1508244 2 QT 32 100 W 2940 145 330 170

187

8254

45°

280cd/klm

A

B

C

C82558256

45°

400cd/klm


Two hand-blown crystal glass elements with thread

Reflectors of pure high-gloss anodized aluminium


Stainless steel metal bracket


8254 · 8255 installation surface 80 x 30 mm 8256 installation surface 100 x 40 mm

lamp lumen A B C

8254 2 QT 18 60 W 1580 70 255 1058255 2 QT 32 75 W 2100 95 310 1308256 2 QT 32 100 W 2940 110 330 155

188

8260

45°

320cd/klm

8261

45°

400cd/klm

8396

45°

80cd/klm

These luminaires with built-in reflectors provide directed and unshielded light. Two of the reflectors

of pure aluminium connected to the glass direct most of the light upwards and downwards.

The unshielded part of the light, which exits between the reflector and lamp base, is distributed

softly and uniformly.

Excellent lighting tools to illuminate walls, pillars and architectural details – whether arranged

singularly or in groups.

Matching recessed ceiling luminaires are given on page 26 – matching ceiling luminaires on page 44.

Wall luminaires with reflectors · Light in two directions 1580 - 2300 lumen

189

B

A

B

A

C

C


Two hand-blown opal glass elements with thread

Reflectors of pure anodized aluminium


Stainless steel bracket



8260 installation surface 80 x 30 mm 8261 · 8396 installation surface 100 x 40 mm

lamp lumen A B C

8260 2 QT 18 60 W 1580 70 410 1058261 2 QT 32 75 W 2100 95 560 130

8396 2 TC-DEL 18 W 2300 95 560 130

190

Powerful, unshielded luminaires in five sizes for fluorescent lamps.

Open wall luminaires with a high degree of lighting efficiency.

This luminaire series is characterized by its different sizes, light outputs, and

elongated design. Perfect proportions and impressive hand-blown three-ply

opal glass make these luminaires aesthetic elements of interior design.

Robust and reliable lighting tools that are very economical over long periods

of operation thanks to modern lamp technology and perfect workmanship.


page 228

191

330390

530630

710

A

C

B

Wall luminaires for fluorescent lamps




8392 · 7622 · 8702 with built-in electronic ballast


lamp lumen A B C

8392 1 TC-SEL 11 W 900 70 330 1058100 1 TC-L 24 W 1800 80 390 1157621 1 TC-L 36 W 2900 80 530 1157622 1 TC-L 55 W 4800 100 630 1358702 1 TC-L 80 W 6000 110 710 145

192

Wall luminaires for fluorescent lamps with high lighting efficiency.

Equipped either with one or two glass elements.

This series is characterized by different sizes, light outputs and

materials as well as the elongated shape of the luminaires.

High-quality metal parts combined with hand-blown three-ply opal

glass make these luminaires aesthetic elements of interior design.

They are robust and reliable lighting tools, distinguished by modern

lamp technology, an excellent range of materials and precise

workmanship, providing very economical light over long periods of

operation.

Unshielded wall luminaires with high light outputs 1200 - 5800 lumen

white aluminium gold

193

B

A

C

B

A

C

300400650

6007501200

300400650

6007501200

Single or double wall luminaires for fluorescent lamps

Open hand-blown opal glass with thread

Metal parts Surface finish options • chrome • gold, 24 carat • white aluminium enamel RAL 9006



A space of approx. 70 % of the luminaire length - B - must be provided above the single luminaire to allow relamping. For the double luminaire, space of approx. 40 % of the luminaire length - B - must be provided above and below the luminaire.

double wall luminaires

chrome

gold

white aluminium

lamp

lumen

A

B

C

7439 7440 8306 2 TC-D 18 W 2400 90 600 1007335 7334 8307 2 TC-D 26 W 3600 115 750 1357338 7337 8308 2 TC-L 36 W 5800 145 1200 160

single wall luminaires

chrome

gold

white aluminium

lamp

lumen

A

B

C

7422 7426 8303 1 TC-D 18 W 1200 90 300 1007329 7328 8304 1 TC-D 26 W 1800 115 400 1357332 7331 8305 1 TC-L 36 W 2900 145 650 160

194

Unshielded wall luminaires in multiple configuration for halogen lamps and fluorescent lamps.

The different sizes and light outputs allow great design potential.

The slim cylinders made of hand-blown, three-ply opal glass are held by a strikingly precise ring

segment with rectangular cross-section.

The precious metal parts are polished by hand with masterly skill. The luminaires provide impressive

and festive light in a clear, modern shape, designed for exclusive private rooms and very elegant

architecture. Their distinctive shape unfolds by day and by night, highlighting their striking effect

visually and spatially.

Matching pendant luminaires to plan lighting systems are given on pages 250 - 253.

Unshielded wall luminaires · 1380 - 10 500 lumen

195

A

B

C

D

A

C

B

D

A

B

C

D

A

C

B

D

lamp lumen A B C D

8983 6 QT 26 40 W 2760 400 400 160 508985 6 QT 32 100 W 8820 650 640 250 80

8987 6 TC-DEL 26 W 10 500 650 640 250 80



Metal parts • polished aluminium


lamp lumen A B C D

8982 3 QT 26 40 W 1380 400 235 160 508984 3 QT 32 100 W 4410 650 385 250 80

8986 3 TC-DEL 26 W 5250 650 385 250 80



196

Powerful, unshielded luminaires in four sizes for halogen lamps and fluorescent lamps.

Wall luminaires with cylindrical, hand-blown glass and high-quality metal parts.

Depending on the lighting situation and required light output, these luminaires can

be used either in single or double configuration. They are designed to illuminate

small to large rooms – individually or in groups. Their shallow projection makes these

luminaires especially suitable for halls, stairways and for installation in columns and

pillars.

Robust and reliable lighting tools which are characterised by modern lamp technology

and perfect workmanship and can operate very economically for long periods.


page 244

197

B

A

C

B

A

B

A

CC



Metal bracket • chrome




lamp lumen A B C

7230 1 QT 32 100 W 1470 70 300 70

7233 1 TC-D 18 W 1200 LLB* 70 300 707236 1 TC-D 26 W 1800 LLB* 90 390 907239 1 TC-L 36 W 2900 LLB* 115 650 1107616 1 TC-L 55 W 4800 EB** 115 750 110

lamp lumen A B C

8884 2 QT 32 100 W 2940 185 380 95

8885 2 TC-D 26 W 3600 LLB* 185 380 958886 2 TC-L 36 W 5800 EB** 240 680 1258887 2 TC-L 55 W 9600 EB** 240 850 125




198

IP 44

Enclosed luminaires in two sizes for halogen lamps and fluorescent lamps.

Slender luminaires with two hand-blown opal glass elements and precise metal parts.

The precious three-ply opal glass distributes the light from the lamps, which is natural in

colour, softly and uniformly.

The high protection class IP 44 opens up a broad field of application in areas where this

protection class is required – for example in bathrooms. Special regulations apply here to

protect people from electric shock.

Luminaires installed in defined areas for tap connections must have protection class IP 44.

These wall luminaires are suitable for a host of applications – arranged singularly or in groups.


199

A

B

C



Metal parts Surface finish options • stainless steel • chrome • white enamel RAL 9010


Please note: A space of approx. 35 % of the luminaire length - A - must be provided at both ends of the luminaire to allow relamping.


white

lamp

lumen

A

B

C

8706 8708 8710 4 QT 14 40 W 1840 640 60 908707 8709 8711 4 QT 32 60 W 3160 920 80 110

8202 8200 8198 2 TC-S 11 W 1800 640 60 908203 8201 8199 2 TC-L 24 W 3600 920 80 110

200

IP 65

Unshielded wall luminaires in five different lengths. Powerful luminaires with a glass element

enclosed at both ends by metal cylinders. Hand-blown, three-ply opal glass and precise metal

parts in perfect harmony.

The high protection class IP 65 opens up a broad field of application – for example in bathrooms

or wellness areas.

Wall luminaires for a host of applications – arranged singularly or in groups.

An inner mechanism allows the glass to be swivelled in and out for relamping so they can also be

installed horizontally or vertically in niches between walls. Necessary planning data and technical

data are given in the instructions for use for these luminaires.

Crystal mirrors to match the dimensions of these luminaires are given on page 216.


201

A

B

C

500

600

700

1000

350


lamp

lumen

A

B

C

6641 6645 2 QT 14 40 W 920 350 80 1156642 6646 3 QT 14 40 W 1380 500 80 1156643 6647 4 QT 14 40 W 1840 600 80 115

6644 6648 1 TC-L 18 W 1200 350 80 1158728 8789 1 TC-L 24 W 1800 500 80 1158729 8790 1 TC-L 36 W 2900 600 80 1158730 8791 2 T 16 24 W 3500 700 80 1158731 8792 2 T 16 39 W 6200 1000 80 115



Metal parts Surface finish options • stainless steel • chrome


An inner mechanism allows the glass to be swivelled in and out for relamping.

202

IP 44

Enclosed wall luminaires in five sizes with different light outputs for general service lamps and

fluorescent lamps. Hand-blown opal glass and precise metal parts interact to perfection.

The three-ply opal glass distributes the light from the lamps, which is neutral in colour, softly

and uniformly.

The high protection class IP 44 opens up a broad field of application, also in areas where

this protection class is prescribed – for example in bathrooms.

The luminaires can be installed in a horizontal or vertical position.




203

C

B

A

500

400

900

600

700



Metal parts Surface finish options • stainless steel • chrome • white enamel RAL 9010


8641 · 8645 · 8649 with built-in electronic ballast

Please note: A space of approx. 50 % of the luminaire length - A - must be provided at one end of the luminaire to allow relamping.


white

lamp

lumen

A

B

C

8190 8182 8174 2 C 35 40 W 800 400 60 908191 8183 8175 3 C 35 40 W 1200 500 70 1008192 8184 8176 3 C 35 40 W 1200 600 70 1008193 8185 8177 4 C 35 40 W 1600 700 70 1008639 8643 8647 5 C 35 40 W 2000 900 70 100

8194 8186 8178 1 TC-S 11 W 900 400 60 908195 8187 8179 1 TC-L 18 W 1200 500 70 1008196 8188 8180 1 TC-L 24 W 1800 600 70 1008197 8189 8181 1 TC-L 36 W 2900 700 70 1008641 8645 8649 1 TC-L 55 W 4800 900 70 100

204

IP 44


Enclosed ceiling and wall luminaires in three sizes with diverse light outputs, designed for fluorescent lamps.

The three-ply opal glass distributes the light from the lamps, which is neutral in colour, softly and uniformly.

The luminaire glass is enclosed by precise metal cylinders which are available in a chrome or elegant white

surface finish.

The luminaires can be installed in a horizontal or vertical position.

Their shallow projection makes the luminaires especially suitable for halls, stairways and installation on

columns and pillars.

The high protection class IP 44 opens up a broad field of application, also in areas where this protection

class is prescribed – for example in bathrooms.

Robust and reliable lighting tools which are characterised by modern lamp technology and perfect

workmanship and can operate very economically for long periods.

205

A

B

C

C

A

B

500

900

1100



Metal parts made of aluminium and stainless steel Surface finish options • chrome • white enamel RAL 9010

The luminaires are fitted with the required ballasts.


A space of 40 % of the luminaire length - A - must be provided above or at the side of the luminaire to allow relamping.

chrome white lamp lumen A B C

7502 7499 1 TC-S 11 W 900 500 60 957506 7503 1 TC-L 36 W 2900 900 70 1057661 7658 1 TC-L 55 W 4800 1100 80 115

206

IP 44

Enclosed wall luminaires in three sizes with different light outputs for general service lamps and

fluorescent lamps. The hand-blown, three-ply opal glass distributes the light from the lamps,

which is neutral in colour, softly and uniformly. The range of different precious metal surface

finishes allows the luminaires to harmonise perfectly with building details of interior design.

The high protection class IP 44 opens up a broad field of application, also in areas in which

this protection class is prescribed – for example in bathrooms.

The luminaires can be installed in horizontal or vertical positions.




207

400

500

600

A

B

C



Die cast aluminium and aluminium parts Surface finish options • chrome • gold, 24 carat • white enamel RAL 9010


To special order, we can supply these luminaires equipped for low voltage halogen lamps for applications in wet rooms e.g. in bathrooms or showers. In this case, external safety transformers must be used.


7443 7472 7468 2 TC-S 9 W 1200 400 90 807153 7149 7145 1 TC-L 24 W 1800 500 90 807154 7150 7146 1 TC-L 36 W 2900 600 90 80


7471 7473 7469 2 C 35 40 W 800 400 90 807155 7151 7147 3 C 35 40 W 1200 500 90 807156 7152 7148 4 C 35 40 W 1600 600 90 80

general service lamps

chrome white lamp lumen A B C

8636 8634 1 TC-L 24 W 1800 400 90 808637 8635 1 TC-L 36 W 2900 500 90 808006 8003 1 TC-L 36 W 2900 600 90 80

low-loss ballasts

electronic ballasts

208

IP 44

Enclosed wall luminaires in four sizes with different light

outputs for general service lamps and fluorescent lamps.

The hand-blown, three-ply opal glass distributes the

light from the lamps, which is neutral in colour, softly and

uniformly.

The high protection class IP 44 opens up a broad field of

application, also in areas where this protection class is

prescribed – for example in bathrooms.

The luminaires can be installed horizontally or vertically.

Wall luminaires for a host of applications – arranged

singularly or in groups.


209

210

310

410

510

A

B

C



Die cast aluminium and aluminium parts • white enamel RAL 9010

2 cable entries for through-wiring


To special order, we can also supply the luminaires for fluorescent lamps with an electronic ballast.

lamp lumen A B C

8069 1 A 60 40 W 415 210 100 958000 2 A 60 40 W 830 310 100 953942 2 A 60 60 W 1420 410 100 953945 2 A 60 75 W 1870 510 100 95

8070 1 TC-D 13 W 900 210 100 953943 1 TC-D 18 W 1200 310 100 953944 2 TC-D 13 W 1800 410 100 953946 2 TC-D 18 W 2400 510 100 95

210

Wall luminaires · 800 -1800 lumen

The luminaires on this double page are available with or without a built-in safety socket outlet. Luminaires with socket are 35 mm longer than luminaires without socket.

Enclosed wall luminaires in four sizes with different light outputs for general service lamps and

fluorescent lamps.

The hand-blown, three-ply opal glass distributes the light from the lamps, which is neutral in colour,

softly and uniformly. Even when operated at a high wattage, there is no obvious glare.

The metal parts of these luminaires have a white – RAL 9010 – enamel surface finish. To special order,

we also supply them in any other RAL colour.

The luminaires are available with or without a built-in safety socket outlet.

They can be installed horizontally or vertically.


211

300

400

500

600

A

B

C



Die cast aluminium and aluminium parts • white enamel RAL 9010

Luminaires for fluorescent lamps TC-S with built-in low-loss ballast, luminaires for fluorescent lamps TC-SEL with electronic ballast


with safety socket outlet

lamp lumen A B C

3710 2 D 45 40 W 800 335 90 753711 3 D 45 40 W 1200 435 90 753712 3 D 45 40 W 1200 535 90 753713 4 D 45 40 W 1600 635 90 75

3714 1 TC-S 11 W 900 335 90 753715 2 TC-S 9 W 1200 435 90 753716 2 TC-S 9 +11 W 1500 535 90 753717 2 TC-S 11 W 1800 635 90 75

lamp lumen A B C

3628 2 D 45 40 W 800 300 90 753629 3 D 45 40 W 1200 400 90 753630 3 D 45 40 W 1200 500 90 753631 4 D 45 40 W 1600 600 90 75

3632 1 TC-S 11 W 900 300 90 753633 2 TC-S 9 W 1200 400 90 753634 2 TC-S 9 +11 W 1500 500 90 753635 2 TC-S 11 W 1800 600 90 75

7484 1 TC-SEL 11 W 900 300 90 757485 2 TC-SEL 9 W 1200 400 90 757486 2 TC-SEL 9 +11 W 1500 500 90 757487 2 TC-SEL 11 W 1800 600 90 75

212

IP 44


Unshielded wall luminaires for general service lamps and fluorescent

lamps. Precise metal fitters with precious surface finishes.

The hand-blown, three-ply opal glass distributes the light softly and

uniformly. Their shock-proof construction ensures that the glass is

perfectly supported on the fitter.


213

A

B

C

A

B

C




with 2 cable entries for through-wiring



lamp

lumen

A

B

C

8544 8542 2 D 45 40 W 800 315 95 908545 8543 3 D 45 40 W 1200 415 95 90

8548 8546 1 TC-L 18 W 1200 315 95 908549 8547 1 TC-L 24 W 1800 415 95 90


lamp

lumen

A

B

C

8520 8516 1 A 60 40 W 415 215 115 908521 8517 2 A 60 40 W 830 315 115 908522 8518 2 A 60 60 W 1420 415 115 908523 8519 2 A 60 75 W 1870 515 115 90

8528 8524 1 TC-DEL 13 W 850 215 115 908529 8525 1 TC-DEL 18 W 1150 315 115 908530 8526 1 TC-L 24 W 1800 415 115 908531 8527 1 TC-L 36 W 2900 515 115 90

illustration on the right

illustration on the left

214

IP 44

Enclosed ceiling and wall luminaires for halogen lamps and fluorescent lamps.

Luminaires of impressive quality with precise metal fitters, precious surface finishes and

hand-blown, three-ply opal glass.

They can be installed either on walls or ceilings.

Their shock-proof construction ensures that the glass is perfectly supported on the fitter.

Available in protection class IP 44, they are also ideal and safe for use in bathrooms.


Robust and reliable lighting tools that provide perfect light over long periods of operation.


215

B

A

C



Aluminium fitter Surface finish options • stainless steel • chrome • matt brass

with 2 cable entries for through-wiring



matt brass

lamp

lumen

A

B

C

8332 8388 8427 1 QT 32 75 W 1050 340 100 1008333 8389 8428 2 QT 32 60 W 1580 470 100 120

8334 8390 8429 1 TC-DEL 26 W 1750 340 100 1008335 8391 8430 2 TC-DEL 18 W 2300 470 100 120

216

A

B

C

Crystal glass mirrors

Wall mirrors made of crystal mirror glass to match the luminaires on pages 198 - 211

Surrounding aluminium frame Surface finish options • chrome • white enamel RAL 9010

Adjustable suspension for easy installation

chrome white A B C

5102 5028 crystal glass mirror 600 400 285103 5029 crystal glass mirror 600 500 285104 5027 crystal glass mirror 600 600 285105 5030 crystal glass mirror 800 600 285106 5041 crystal glass mirror 1000 400 285107 5031 crystal glass mirror 1000 600 285108 5042 crystal glass mirror 1200 400 28

Many of our luminaires can be combined with a mirror. When using different makes, however, it is often difficult to match

dimensions, surface finish or overall design quality.

To complement our luminaires to perfection, we have designed the crystal glass mirrors shown here. High-quality wall

mirrors for use in interiors and bathrooms. The dimensions are tailored to many of our luminaires. To special order, we

also supply crystal glass mirrors in other dimensions and surface finishes.

217

IP 44

A B

A B

Wall luminaires for general service lamps Protection class IP 44



lamp lumen A B

2808 1 D 45 40 W 400 180 902856 1 A 60 60 W 710 200 1102991 1 A 60 75 W 935 260 120


High-quality hand-blown luminaire glass, in which a

wafer-thin layer of opal glass is enclosed between two

crystal glass layers, distributes the light uniformly and

pleasantly in the room. These enclosed wall luminaires

highlight the beauty of the three-ply opal glass.

This series is characterised by its striking or discreet

effect.

The seashell glass is a striking reproduction of the

beauty of its natural model. Sand is one of the most

precious raw materials in the manufacture of glass –

and perhaps this is why we feel a special bond with

the seashell.

218

495748434809

30°

180cd/klm

49584844

30°

240cd/klm

48454959

30°

360cd/klm

48114814

30°

420cd/klm

496048664867

30°

300cd/klm

49614862

30°

240cd/klm

48634963

30°

300cd/klm

48974962

30°

360cd/klm

Pendant luminaires in four sizes with many different light outputs. They are

equipped either with opal glass or crystal glass, and in both cases with a

reflector system. Part of the light is directed, and the other part is unshielded.

To generate high horizontal illuminance, the greatest part of the light is directed

downwards by the reflector.

The smaller part of the light penetrates the hand-blown luminaire glass and

produces vertical illuminance.

These impressive crystal glass luminaires produce brilliant light in rooms.

The opal glass luminaires provide a pleasant, soft and uniform light distribution

which is ideal for bright reflection surfaces.

»DUATA« pendant luminaires · Downlights for halogen lamps, fluorescent lamps and discharge lamps 1150 -13 300 lumen

page 36

219

170 230 285 360

170 230 285 360

410280

500590

A

B

L

Pendant luminaires · Downlights for halogen lamps, fluorescent lamps and discharge lamps

Luminaires with hand-blown opal glass Reflector of pure anodised aluminium Die-cast aluminium parts and metal canopy • light-grey enamel RAL 7035

Luminaires with hand-blown crystal glass Reflector of pure high-gloss anodised aluminium Die-cast aluminium parts and metal canopy • white aluminium enamel RAL 9006

L = overall length of the luminaire Black cable

The luminaires for fluorescent lamps are fitted with electronic ballasts, the luminaires for discharge lamps with low-loss ballasts.

crystal glass · direct + indirect

lamp lumen A B L

4960 1 QT 32 100 W 1470 170 280 40004866 1 QT 32 150 W 2400 230 410 40004867 1 QT 32 250 W 4210 285 500 4000


4897 1 HIE 70/100 W 8500 285 500 40004962 1 HIE 100/150 W 13300 360 590 4000

opal glass · direct + wide beam

lamp lumen A B L

4957 1 QT 32 100 W 1470 170 280 40004843 1 QT 32 150 W 2400 230 410 40004809 1 QT 32 250 W 4210 285 500 4000


4811 1 HIE 70/100 W 8500 285 500 40004814 1 HIE 100/150 W 13300 360 590 4000

220

5259

30°

150cd/klm

5401

30°

480cd/klm

5260

30°

360cd/klm

5261

30°

450cd/klm

5403

30°

720cd/klm

5257

30°

120cd/klm

5258

30°

150cd/klm

5402

30°

420cd/klm

A series of downlights with dual lighting technology. High-quality luminaires available in three sizes with different light

outputs. A unit comprising reflector and annular shield distributes the light from the light source in a main downlight –

creating high illuminance below the luminaires – and a smaller unshielded light – producing pleasant surrounding

brightness in the room. The light resulting from the interaction of these two types of light distribution is very efficient with

a high level of visual comfort.

The character of these luminaires is defined by the heavy frosted crystal glass with precise light-diffusing texture and its

great thickness. Modern lighting technology and our craftsmanship in making glass have created distinctive lighting tools

for good planning and project work.

The luminaires for fluorescent lamps and discharge lamps are equipped with electronic ballasts.

Matching recessed ceiling luminaires are given on page 30, matching surface-mounted ceiling luminaires on page 38.

Pendant luminaires · Downlights for halogen lamps, fluorescent lamps and discharge lamps 1470 - 9600 lumen

221

A

B

L

185 240 315

320405

535

185 240 315



Reflector of pure high-gloss anodised aluminium

Metal parts and metal canopy • white aluminium enamel RAL 9006



lamp lumen A B L

5401 1 QT 32 100 W 1470 185 320 20005402 1 QT 32 150 W 2400 240 405 30005403 1 QT 32 250 W 4210 315 535 4000


5260 1 HIE 70 W 6400 240 405 30005261 1 HIE 100 W 8500 315 535 4000

page 38

222

52625263

30°

480cd/klm

52645265

30°

720cd/klm

52675268

30°

420cd/klm

5269

30°

300cd/klm

5204499752054998

30°

120cd/klm

5206499952955294

30°

150cd/klm

5200499352014994

30°

150cd/klm

5202499552034996

30°

150cd/klm

Pendant luminaires in four sizes with many different light outputs. They are available in two different

types of glass with diverse lighting characteristics.

The luminaires with opal glass distribute the unshielded light from the lamp without reflector uniformly

in the room.

The luminaires with crystal glass demonstrate their function in a striking way in the successful

interplay of high-gloss reflectors and clear, brilliant crystal glass. The main part of the light is directed

vertically downwards by the reflector system and effectively illuminates the surface below.

The smaller part of the light exits above the reflector and provides pleasant surrounding brightness in

the room.

Two groups of luminaires that are impressive for their light effect, technology and high level of visual

comfort.

Pendant luminaires · Downlights for halogen lamps, fluorescent lamps and discharge lamps 790 - 6400 lumen

223

A

B

L

100 140 200 250

100 140 200

230

470

250

610

330


Hand-blown opal glass or crystal glass Luminaires with crystal glass are equipped with a reflector of pure high-gloss anodised aluminium.

Metal parts and canopy options • stainless steel

black cable

• metal with white enamel RAL 9010 white cable

The luminaires for fluorescent lamps or discharge lamps are fitted with the required ballasts. 5204 · 4997 with conventional ballast 5295 · 5294 · 5269 with low-loss ballast

L = overall length of the luminaire

Please use Osram 64469 AM lamps only for luminaire 5262!

downlights with opal glass

s/steel white lamp lumen A B L

5200 4993 1 QT 32 60 W 790 100 230 20005201 4994 1 QT 32 75 W 1050 140 330 20005202 4995 1 QT 32 150 W 2400 200 470 30005203 4996 1 QT 32 250 W 4210 250 610 4000

5204 4997 1 TC-D 18 W 1200 140 330 20005205 4998 1 TC-TELI 42 W 3200 200 470 30005206 4999 1 TC-TELI 57 W 4300 250 610 4000

5295 5294 1 HIE 70 W 6400 250 610 4000

downlights with crystal glass + reflector

s/steel lamp lumen A B L

5262 1 QT 18 60 W 790 100 230 20005263 1 QT 32 75 W 1050 140 330 20005264 1 QT 32 150 W 2400 200 470 30005265 1 QT 32 250 W 4210 250 610 4000

5267 1 TC-TELI 26 W 1750 200 470 30005268 1 TC-TELI 42 W 3200 250 610 4000

5269 1 HIE 70 W 6400 250 610 4000

224

53395340

30°

150cd/klm

52905291

30°

120cd/klm

5292

30°

75cd/klm

5293

30°

75cd/klm

5386

30°

150cd/klm

5387

30°

120cd/klm

Powerful, unshielded luminaires in five sizes for general service lamps and fluorescent lamps.

Luminaires with hand-blown, three-ply opal glass, in which a wafer-thin opal layer is enclosed

between two crystal glass layers. This produces highly translucent but opaque glass that

distributes the light very uniformly, and this is especially enhanced by the large surface of the

luminaire glass.

Robust and reliable lighting tools that provide perfect light over long periods of operation.

Perfectly proportioned and impressive luminaire glass makes these luminaires long-lasting

aesthetic elements of interior design. page 152

Unshielded pendant luminaires with high light outputs for general service lamps and fluorescent lamps 1150 -18 000 lumen

225

A

B

L

225 260 280155

390550

630 780

140

300

Pendant luminaires for general service lamps and fluorescent lamps


Stainless steel canopy


L = overall length of the luminaire Steel wire · transparent cable 5293 white cable

lamp lumen A B L

5386 1 A 60 100 W 1340 140 300 20005339 1 A 65 150 W 2160 155 390 20005340 2 A 65 150 W 4320 225 550 3000

5387 1 TC-DEL 18 W 1150 140 300 20005290 1 TC-TELI 32 W 2400 155 390 20005291 1 TC-TELI 57 W 4300 225 550 30005292 3 TC-L 36 W 8700 295 630 40005293 3 TC-L 80 W 18000 330 780 4000

226

Pendant luminaires with rod suspension, available in four sizes with

symmetrically wide beam light distribution. These luminaires form part of a new

group comprising pendant, recessed ceiling, ceiling and wall luminaires that are

impressive for their high material quality and technical elegance.

Luminaire glass in the form of precisely calculated parabolic reflectors made of

hand-blown, three-ply opal glass. The white inside of the glass reflects the light

like metal reflectors. Part of the light penetrates the satin matt opal glass body

and provides soft and uniform distribution of the unshielded light.

These luminaires are impressive for their light effect, technology and high level

of visual comfort.

Unshielded pendant luminaires for halogen lamps, fluorescent lamps and discharge lamps 790 - 6400 lumen

page 48 page 144page 28

227

52825283

30°

150cd/klm

528454215423

30°

150cd/klm

5286

30°

120cd/klm

52875422

30°

120cd/klm

A

B

L

185 220140

240315

395

185 220140 260

Pendant luminaires with rod suspension for halogen lamps, fluorescent lamps and discharge lamps

Hand-blown three-ply opal glass, satin matt with thread

Metal parts, rod suspension and metal canopy • white aluminium enamel RAL 9006


Rod suspension Ø 10 mm · 5282 rod susp. Ø 8 mm 5421 · 5422 · 5423 rod suspension Ø 13 mm

A special construction allows the rod suspension to be shortened easily to the required length.


To special order, we also supply these luminaires in greater overall lengths.

lamp lumen A B L

5282 1 QT 26 60 W 790 140 240 16755283 1 QT 32 100 W 1470 185 315 17505284 1 QT 32 150 W 2400 220 395 18305421 1 QT 32 250 W 4210 260 460 1900


5423 1 HIE 70 W 6400 260 460 1900

228

Powerful, unshielded luminaires, available in six sizes for general service lamps


Luminaires with cylinders made of hand-blown, three-ply opal glass, in which

a wafer-thin opal layer is enclosed between two crystal glass layers.

This produces a highly translucent but opaque glass that distributes the light

very uniformly, and this is especially enhanced by the large surface of the

luminaire glass.


of operation. Perfectly proportioned and impressive luminaire glass makes the

luminaires long-lasting elements of interior design.

Unshielded pendant luminaires with high light outputs for general service lamps and fluorescent lamps · 935 -18 000 lumen

page 190

229

A

B

L

110 140 16080

300400

620 650

160

700

220

800



Metal parts and metal canopy • white enamel RAL 9010 Stainless steel screws for glass support

The luminaires for fluorescent lamps are fitted with the required ballasts. 5345 · 5392 with electronic ballast

L = overall length of the luminaire White cable

lamp lumen A B L

4911 1 A 60 75 W 935 80 300 20004912 1 A 65 150 W 2160 110 400 3000

4833 1 TC-D 18 W 1200 80 300 20004834 1 TC-D 26 W 1800 110 400 30004835 1 TC-L 36 W 2900 140 620 40004836 2 TC-L 36 W 5800 160 650 40005345 2 TC-L 55 W 9600 160 700 40005392 3 TC-L 80 W 18000 220 800 4000

230

Unshielded pendant luminaires with high light outputs for halogen lamps, general service lamps and fluorescent lamps 790 - 5360 lumen

Pendant luminaires with rod suspension – in the classic form of the cylinder. These powerful,

unshielded luminaires are available in four sizes either for halogen lamps, general service lamps

or fluorescent lamps. The luminaires for fluorescent lamps have satin matt crystal glass inside to

suppress glare. We also supply inside colour gradient glass for these luminaires in the colours blue,

yellow and green. In addition to the white downlight, this produces a fascinating colour gradient on

the outside opal glass cylinder.

Luminaires with hand-blown, three-ply opal glass, in which a wafer-thin layer of opal glass is enclosed

between two crystal glass layers, distributes the light very uniformly, and this is especially enhanced

by the large surface of the luminaire glass.

Robust and reliable lighting tools that provide perfect light over long periods of operation.We supply inside colour gradient glass as an accessory for luminaires 5381 · 5382 · 5383.

231

A

B

L

C

140 220 300 350

140 220 300 350

A

B

L

C

Pendant luminaires with rod suspension for halogen lamps, general service lamps and fluorescent lamps


The luminaires for fluorescent lamps also have inside satin matt crystal glass with thread.

Stainless steel parts and rod suspension


Rod suspension Ø 8 mm 5377 Rod suspension Ø 10 mm 5378 · 5381 Rod suspension Ø 13 mm 5379 · 5380 · 5382 · 5383

The rod suspension can be easily shortened on site. To special order, we also supply these luminaires in greater lengths.

Inside colour gradient glass is also available in the colours blue, yellow and green for the luminaires with fluorescent lamps. Colour gradient glass is an accessory and must be ordered separately.


lamp lumen A B C L

5381 1 TC-TELI 32 W 2400 220 220 94 16805382 1 TC-TELI 57 W 4300 300 300 130 18505383 1 TC-TELI 70 W 5200 350 350 150 1900

lamp lumen A B C L

5377 1 QT 14 60 W 790 140 140 – 15505378 1 A 60 100 W 1340 220 220 – 16805379 1 A 65 150 W 2160 300 300 – 18505380 4 A 60 100 W 5360 350 350 – 1900

96058 96059 9605796061 96062 9606096064 96065 96063

colour gradient glass

232

Unshielded luminaires in three sizes for halogen lamps and general service lamps.

Luminaires with hand-blown, three-ply opal glass, in which a wafer-thin layer of opal glass

is enclosed between two crystal glass layers, distributes the light very uniformly, and this is

especially enhanced by the large surface of the luminaire glass.

Pendant luminaires for a host of applications in private and public areas.

Unshielded pendant luminaires for halogen lamps and general service lamps · 790 - 2160 lumen

233

A

B

L

210 265 330

210 265 330

Pendant luminaires for halogen lamps and general service lamps


Stainless steel canopy

L = overall length of the luminaire 3 steel wires · transparent cable

lamp lumen A B L

5407 1 QT 14 60 W 790 210 180 20005408 1 A 60 100 W 1340 265 225 30005409 1 A 65 150 W 2160 330 280 4000

234

Powerful, unshielded pendant luminaires in the classic form of the cylinder in four sizes with different

light outputs.


between two crystal glass layers. This produces highly translucent but opaque glass that distributes

the light very uniformly, and this is especially enhanced by the large surface of the luminaire glass.

Classic pendant luminaires with modern lamp technology for elegant and modern light design.

Pendant luminaires with high light outputs for general service lamps and fluorescent lamps · 1340 - 8700 lumen

chromewhite

235

A

B

L

120 150 180 220

350280420

550

120 150 180 220



Metal parts and metal canopy Surface finish options • white enamel RAL 9010

white cable• chrome

black cableLuminaires for fluorescent lamps with built-in electronic ballast


white chrome lamp lumen A B L

4413 5369 1 A 60 100 W 1340 120 280 20004414 5370 1 A 65 150 W 2160 150 350 20504415 5371 1 A 80 200 W 3040 180 420 21004416 5372 2 A 65 150 W 4320 220 550 2200

5341 5373 1 TC-TELI 26 W 1750 120 280 20005342 5374 1 TC-TELI 42 W 3200 150 350 20505343 5375 1 TC-TELI 57 W 4300 180 420 21005344 5376 3 TC-L 36 W 8700 220 550 2200

236

Unshielded pendant luminaires in five sizes for halogen lamps, general service

lamps and fluorescent lamps.

Luminaires with clear crystal glass. The partially frosted glass ensures pleasant

distribution of the luminance without impairing the aesthetics of the clear glass.

These cylindrical pendant luminaires are distinguished by their perfect

proportions, their visible technical structure, high level of brilliance and visual

comfort.

They are reliable lighting tools and high-quality elements of interior design.

Unshielded pendant luminaires for halogen lamps, general service lamps and fluorescent lamps 460 - 3200 lumen

page 54 page 184

237

1601401108060

1601401108060

345260

480600

695

A

B

L

Pendant luminaires for halogen lamps, general service lamps and fluorescent lamps


Stainless steel metal parts and canopy



lamp lumen A B L

5391 1 QT 26 40 W 460 60 270 1500

5272 1 A 60 75 W 935 80 345 20005273 1 A 60 100 W 1340 110 480 30005274 1 A 65 150 W 2160 140 600 40005275 1 A 80 200 W 3040 160 695 4000


238

Elongated luminaires with slim glass cylinders in two lengths for fluorescent lamps.


between two crystal glass layers. This produces highly translucent but opaque glass that distributes

the light very uniformly.

These luminaires for high light outputs and economic lamps can divide and structure rooms. Installed

in rows, they create strikingly linear light structures.

Unshielded pendant luminaires for fluorescent lamps 3500 - 4800 lumen

239

B

A

C Pendant luminaires for fluorescent lamps


Metal parts • white enamel RAL 9010


Overall length of the luminaire 2000 mm Steel wire · transparent cable

lamp lumen A B C

5311 1 TC-L 40 W 3500 100 620 355312 1 TC-L 55 W 4800 110 700 35

240

Pendant luminaires with slim glass cylinders in different

dimensions and light outputs. They are supplied with

a rod suspension.

A special construction allows the rod suspension to be

shortened easily to the required length.

Luminaires with hand-blown, three-ply opal glass.

They are characterised by the formal unit of glass and

metal, and material quality.

Luminaires that can divide and structure rooms.

Unshielded pendant luminaires for halogen lamps and fluorescent lamps 920 - 3600 lumen

The canopy construction allows lateral oscillation in the longitudinal axis of the luminaires. The luminaires can be aligned easily and fast to meet building requirements or several luminaires can be arranged in a row.

241

A

B

L

Pendant luminaires for halogen lamps and fluorescent lamps


Metal parts and metal canopy Stainless steel surface


Rod suspension Ø 13 mm 5364 rod suspension Ø 16 mm



surface finish s/steel

lamp

lumen

A

B

L

5361 2 QT 26 40 W 920 400 50 15005362 2 QT 14 60 W 1580 500 60 1500

5363 2 TC-SEL 11 W 1800 575 60 15005364 2 TC-L 24 W 3600 900 80 1500

242

531546834682

45°

80cd/klm

531646534651

45°

60cd/klm

531746544652

45°

60cd/klm

538853895390

45°

80cd/klm

Luminaires with hand-blown, three-ply opal glass.

These luminaires are characterised by the formal unit of glass

and metal, and the material quality of the metal parts with their

exquisite surface finishes. They provide pleasant illumination

when installed in rows or groups.

Several luminaires can be combined in a group at one installation

point to illuminate stairways or high rooms. We then supply the

single luminaires with the required cable length and a distributor

for 2- 6 luminaires.

Matching accessories such as distributors and cross-arms are

given on page 300.

Unshielded pendant luminaires for halogen lamps and fluorescent lamps 460 - 2900 lumen

243

A

B

L

240405

620

50 80 120



Metal parts and metal canopy Surface finish options • stainless steel · black cable • brass · black cable • white enamel RAL 9010

white cable




white

lamp

lumen

A

B

L

5388 5389 5390 1 QT 26 40 W 460 50 240 20005315 4683 4682 1 QT 32 75 W 1050 80 405 2000

5316 4653 4651 1 TC-D 26 W 1800 80 405 20005317 4654 4652 1 TC-L 36 W 2900 120 620 3000

244

5335

45°

48cd/klm

5337

45°

48cd/klm

5336

45°

48cd/klm

5338

45°

60cd/klm

Pendant luminaires with rod suspension. Powerful, unshielded luminaires in

three sizes. Luminaires with hand-blown, three-ply opal glass, in which a wafer-

thin opal glass layer is enclosed between two crystal glass layers.

This produces a highly translucent but opaque glass that distributes the light

very uniformly, and this is especially enhanced by the large surface of the

luminaire glass.

They are robust and reliable lighting tools that provide perfect light over long


Classic pendant luminaires with modern lamp technology for stylish and

contemporary lighting design.

Pendant luminaires with high light outputs for halogen lamps and fluorescent lamps · 4200 -19 200 lumen

245

A

B

L

385

675850

Pendant luminaires with rod suspension for halogen lamps and fluorescent lamps

Four hand-blown opal glass elements with thread

Metal parts, rod suspension and canopy • polished aluminium


5337 · 5338 with electronic ballast

Rod suspension in single units each 600 mm in length 5335 · 5336 rod suspension Ø 16 mm 5337 · 5338 rod suspension Ø 20 mm



lamp lumen A B L

5335 4 QT 32 75 W 4200 220 385 2475

5336 4 TC-D 26 W 7200 220 385 24755337 4 TC-L 36 W 11600 280 675 27255338 4 TC-L 55 W 19200 280 850 2845

246

4964

30°

420cd/klm

4936

30°

360cd/klm

5393

30°

150cd/klm

5394

30°

90cd/klm

Pendant luminaires in two sizes with different light outputs for halogen lamps and

fluorescent lamps.

To produce high horizontal illuminance, the main part of the light is directed

downwards by the reflector. The smaller unshielded part of the light produces

vertical illuminance.

This dual light distribution provides illuminance with a high level of visual comfort.

When illuminated, the clear crystal glass unfolds its brilliant light effect –

producing technical and festive light.

Pendant luminaires · Downlights for halogen lamps and fluorescent lamps 1750 - 4210 lumen

247

A

B

L

A

B

L

Pendant luminaires · Downlights for halogen lamps and fluorescent lamps

Crystal glass

Reflector of pure high-gloss anodised aluminium

Metal parts and metal canopy • polished aluminium



lamp lumen A B L

4936 1 QT 32 150 W 2400 140 410 40004964 1 QT 32 250 W 4210 180 505 4000

5393 1 TC-TELI 32 W 2400 140 410 40005394 1 TC-TELI 42 W 3200 180 505 4000

248

1 A 601 A 65

45°

80cd/klm

1 A 80

45°

80cd/klm

4 A 60

45°

50cd/klm

8 A 6012 A 60

45°

48cd/klm

A

B

L

Pendant luminaires for general service lamps


Metal parts and metal canopy Surface finish options • chrome • brass

4400 · 4898 with rod suspension Ø 16 mm in single units each 600 mm in length


Unshielded pendant luminaires in four sizes for general service

lamps. The visible technical structure of the luminaires

depends on the number of lamps.

The beauty and brilliance of the antique crystal glass are

most effectively highlighted by the use of clear general

service lamps. Small inclusions of air, diverse in shape and

size, make each glass element a unique masterpiece of the

glassmaker’s art.

Luminaires for exceptionally expressive and brilliant light.

Pendant luminaires with high light outputs for general service lamps · 1340 -11 220 lumen

chrome brass lamp lumen A B L

1554 4541 1 A 60 100 W 1340 160 410 20001555 4542 1 A 65 150 W 2160 180 480 20001556 4543 1 A 80 200 W 3040 220 600 2000

4399 4885 4 A 60 60 W 2840 220 450 22004803 4886 8 A 60 60 W 5680 220 450 2200

4400 4898 12 A 60 75 W 11220 300 750 2400

249

Ceiling luminaires and wall luminaires whose shape, construction and light output match the luminaires on this double page are given on the following pages of this catalogue: ceiling luminaires - page 56 · wall luminaires - page 184

250

· 670 · · 770 · · 1370 ·

13101370

710770

610670

460

Chandeliers for large rooms, designed for halogen lamps and fluorescent lamps.

The slim cylinders made of hand-blown, three-ply opal glass are held by a strikingly

precise ring with rectangular cross-section. Individually manufactured with

masterly skill, the precious metal parts are polished by hand. The chandeliers are

suspended from the ceiling by classical rod suspension. These luminaires with

their different sizes and light outputs offer great design potential. They produce

impressive, festive light in a clear, modern shape – for exclusive private rooms and

grand elegant architecture. Luminaires of this type but with greater light outputs

are given on page 252.

To special order, we also supply these luminaires in a combination of different

chandelier diameters and rod suspension of different lengths. Special RAL colours

are available on request. Matching wall luminaires are given on page 194.

Pendant luminaires for large rooms Chandeliers with high light outputs · 2760 - 21 600 lumen

251

A

B

L

A

B

L

C

C

lamp lumen A B C L

5405 6 QT 26 40 W 2760 460 235 50 1700

5320 6 QT 26 40 W 2760 610 235 50 17005323 6 QT 32 100 W 8820 670 385 80 17004905 6 TC-D 26 W 10 800 670 385 80 1700

5321 8 QT 26 40 W 3680 710 235 50 17005324 8 QT 32 100 W 11 760 770 385 80 17004906 8 TC-D 26 W 14 400 770 385 80 1700

5322 12 QT 26 40 W 5520 1310 235 50 18905325 12 QT 32 100 W 17 640 1370 385 80 19504979 12 TC-D 26 W 21 600 1370 385 80 1950

Chandeliers for halogen lamps and fluorescent lamps


Chandelier and rod suspension • polished aluminium


Rod suspension Ø 13 mm 5405 · 5320 · 5321 Rod suspension Ø 16 mm 5322 · 5323 · 5324 · 4905 · 4906 Rod suspension Ø 20 mm 5325 · 4979

C = diameter of the glass cylinder L = overall length of the luminaire

252

· 670 · · 770 · · 1370 ·

13101370

710770

610670

460

A

B

L

A

B

L

C

C

Pendant luminaires for large rooms Chandeliers with high light outputs · 5520 - 63 000 lumen

Pendant luminaires for large rooms. Their design features and construction

match the luminaires on page 250.

The light outputs of the luminaires on this double page are however

markedly higher, allowing different levels of illuminance in one lighting

system.

The distinctive shape of these luminaires unfolds by day and by night,

highlighting their striking effect visually and spatially. They produce

impressive, festive light in a clear, modern shape – for exclusive private

rooms and grand elegant architecture.

To special order, we also supply these luminaires in a combination of

different chandelier diameters and rod suspension of different lengths.

Special RAL colours are available on request. Matching wall luminaires are

given on page 194.

lamp lumen A B C L

5406 12 QT 26 40 W 5520 460 400 50 1860

5326 12 QT 26 40 W 5520 610 400 50 18605329 12 QT 32 100 W 17 640 670 640 80 19405332 12 TC-DEL 26 W 21 000 670 640 80 1940

5327 16 QT 26 40 W 7360 710 400 50 18605330 16 QT 32 100 W 23 520 770 640 80 19405333 16 TC-DEL 26 W 28 000 770 640 80 1940

5328 24 QT 26 40 W 11 040 1310 400 50 20505331 24 QT 32 100 W 35 280 1370 640 80 21905334 24 TC-DEL 26 W 42 000 1370 640 80 2190

253

A

B

L

A

B

LC C

lamp lumen A B C L

5404 36 QT 26 40 W 16 560 710 720 50 30005412 36 QT 32 100 W 52 920 1370 1265 80 3350

5413 36 TC-DEL 26 W 63 000 1370 1265 80 3350

Chandeliers for halogen lamps and fluorescent lamps


Chandelier and rod suspension • polished aluminium


Rod suspension Ø 13 mm 5406 · 5326 · 5327 Rod suspension Ø 16 mm 5328 · 5329 · 5330

5332 · 5333 · 5404Rod suspension Ø 20 mm 5331 · 5334 · 5412 · 5413

C = diameter of the glass cylinder L = overall length of the luminaire

254

Single and double pendant luminaires for large rooms for halogen lamps and fluorescent lamps


Aluminium support ring • white aluminium enamel RAL 9006


C = diameter of the glass cylinder L = overall length of the luminaire 4 steel cable suspensions · transparent cable The cable is installed in parallel on a steel cable.

Pendant luminaires for large rooms, designed for halogen lamps and

fluorescent lamps.

The square frame of the luminaires holds glass cylinders made of three

ply opal glass, available in single or double configuration. Different levels

of illuminance can be achieved by diverse lamps and light outputs.

Impressive, festive light in a clear, modern shape for exclusive private

rooms and grand elegant architecture.

To special order, we also supply these luminaires in other dimensions.

Special RAL colours are available on request.

»QUADRATA« Pendant luminaires with high light outputs for large rooms 9480 - 42 000 lumen

255

A

B

L

C

A

B

L

C

A

B

L

C

A

B

L

C

A

B

L

C

A

B

L

C

single

lamp lumen A B C L

5417 12 QT 26 60 W 9480 1000 x1000 260 60 4000

5418 12 TC-DEL 26 W 21 000 1000 x1000 260 60 4000

double

lamp lumen A B C L

5419 24 QT 26 60 W 18 960 1000 x1000 470 60 4000

5420 24 TC-DEL 26 W 42 000 1000 x1000 470 60 4000

256

5319

30°

120cd/klm

5271

30°

300cd/klm

Pendant luminaires with rod suspension and two

light outputs. The light from both glass elements is

distributed as directed light and as unshielded light.

To create high horizontal illuminance, most of the light

from the downlight is directed downwards.

The other part of the light penetrates the hand-blown

luminaire glass and produces vertical illuminance.

The light directed upwards is redirected by the top

reflector. This creates a particularly soft and uniform

light distribution and optimum glare suppression.

The luminaires are ideal for lighting situations where

uniformity and glare suppression are the highest priority.

Light in two directions Pendant luminaires with high light outputs 6400 -12 800 lumen

257

A

C

D

L

B

Pendant luminaires with rod suspension · Downlights for fluorescent lamps and discharge lamps


Reflector of pure anodised aluminium

Metal parts • white aluminium enamel RAL 9006


Rod suspension Ø 16 mm in single units each 600 mm in length


lamp lumen A B C D L

5319 2 TC-TELI 42 W 6400 150 850 400 710 2600

5271 2 HIE 70 W 12 800 150 850 400 710 2600

258

A

L

A

L



Metal parts and metal canopy Surface finish options • stainless steel · black cable • chrome · black cable • brass · white cable • white enamel RAL 9010

white cable



Interpretation of a classic. It often appears impossible to improve on a very familiar object but we have

reinterpreted this classic pendant luminaire: modern, simple and equipped with the latest lamp technology.

This series is the continuation of a long tradition.

Luminaires with hand-blown, three-ply opal glass. Highly translucent but opaque glass that distributes

the light uniformly, and this is especially enhanced by the large surface of the luminaire glass.

They are robust and reliable lighting tools that provide perfect light over long periods of operation.

We also supply impact-resistant plastic spheres with a diameter of ≥ 250 mm for special applications.

Pendant luminaires with rod suspension and the same technical characteristics are given on page 260.

The luminaires for fluorescent lamps are fitted with electronic ballasts. Luminaires for a maximum wattage

of 42 W can also be operated at 32 W or 26 W, and luminaires for 32 W at 26 W. Matching ceiling luminaires

are given on page 110.

Unshielded pendant luminaires with high light outputs for general service lamps and fluorescent lamps · 710 - 6400 lumen

s/steel chrome brass white lamp lumen A L

5301 4116 4425 4485 1 A 60 60 W 710 200 19505302 4117 4371 4486 1 A 60 100 W 1340 250 20005303 4118 4372 4487 1 A 65 150 W 2160 300 20005304 4119 4373 4488 1 A 80 200 W 3040 350 20005305 4341 4753 4489 1 A 80 200 W 3040 400 20505306 4120 4754 4490 1 A 80 200 W 3040 450 2200

5307 5214 5218 5210 1 TC-TELI 32 W 2400 300 20005308 5215 5219 5211 1 TC-TELI 42 W 3200 350 20005309 5216 5220 5212 1 TC-TELI 57 W 4300 400 20505310 5217 5221 5213 2 TC-TELI 42 W 6400 450 2200

chrome lamp lumen A L

4100 1 A 60 60 W 710 200 19504101 1 A 60 75 W 935 250 20004102 1 A 60 100 W 1340 300 20004103 1 A 65 150 W 2160 350 20004156 1 A 65 150 W 2160 400 20504270 1 A 80 200 W 3040 450 2200

4410 4 A 60 60 W 2840 450 2200



Metal parts and metal canopy • chrome · black cable

To special order, these pendant luminaires in a specific length are also supplied with rod suspension.

We recommend clear lamps for these luminaires.


antique crystal glass

opal glass

259

350 400 450300250200

350 400 450300250200

Distributors · Cross-arms · Accessories It is often necessary to connect several luminaires to one installation point or to install them in groups. Distributors, cross-arms and practical accessories for many other installation situations are given on page 300.

260

A

L

Pendant luminaires with rod suspension for general service lamps and fluorescent lamps


Metal parts and rod suspension Ø 13 mm Surface finish options • stainless steel • chrome • brass • white enamel RAL 9010


4975 · 5226 · 5231 · 5236 5397 · 5398 · 5399 · 5400 with rod suspension Ø 16 mm


Pendant luminaires with rod suspension in the classic shape of the sphere - with the same

technical characteristics as the luminaires on page 258.

These luminaires are supplied with traditional rod suspension with a diameter of 13 mm.

The large luminaires – sphere diameter 500 mm and 550 mm – have a rod suspension with

a diameter of 16 mm. The 16 mm rod suspension consists of one unit 300 mm in length and

several single units 600 mm in length which are screwed together.

Thanks to a special construction, the rod suspension can be easily shortened to the required

length. To special order, we also supply the luminaires on this double page in larger overall

lengths. They are available too with spheres made of impact-resistant plastic for special

applications.

The luminaires for fluorescent lamps are fitted with electronic ballasts. Luminaires for a

maximum wattage of 1 x 42 W and 2 x 42 W can also be operated at 32 W or 26 W and

luminaires for 32 W at 26 W. Luminaires for 3 x 42 W can be operated at 32 W!

Sphere with rod suspension Unshielded pendant luminaires with high light outputs 1340 -12 900 lumen

s/steel chrome brass white lamp lumen A L

4966 4948 4949 4950 1 A 60 100 W 1340 250 18004967 4710 4718 4726 1 A 65 150 W 2160 300 18504968 4711 4719 4727 1 A 80 200 W 3040 350 19004969 4712 4720 4728 1 A 80 200 W 3040 400 19504970 4713 4721 4729 1 A 80 200 W 3040 450 2000

4971 5232 5227 5222 1 TC-TELI 32 W 2400 300 18504972 5233 5228 5223 1 TC-TELI 42 W 3200 350 19004973 5234 5229 5224 1 TC-TELI 57 W 4300 400 19504974 5235 5230 5225 2 TC-TELI 42 W 6400 450 20004975 5236 5231 5226 3 TC-TELI 42 W 9600 500 26005397 5398 5399 5400 3 TC-TELI 57 W 12900 550 2650

261

350 400 450300250 500 550


262

A

B

Pendant luminaires for globe lamps

Metal parts and metal canopy Surface finish options • stainless steel · black cable • brass · black cable • white enamel RAL 9010

white cable

Overall length of the luminaire 1600 mm Diameter of rod 48 mm

Supplied without lamp

Pendant luminaires of small volume for unshielded globe

lamps. The slim metal cylinders are available in three

surface finishes.

The luminaires are designed for standard globe lamps.

The lamps installed in the luminaires shown on this page

are not supplied with the luminaires.

Matching ceiling luminaires are given on page 112.

Unshielded pendant luminaires 1000 lumen

s/steel brass white lamp lumen A B

4883 4882 4881 1 G 95 100 W 1000 48 200

263

A

B

L



Die-cast aluminium parts Surface finish options • polished stainless steel • brass • white enamel RAL 9010


L = overall length of the luminaire White cable White metal canopy RAL 9010

polished s/steel

brass

white

lamp

lumen

A

B

L

4920 4919 4918 1 C 35 60 W 660 80 315 1800

5357 5356 5355 1 TC-TELI 26 W 1750 105 420 20005360 5359 5358 1 TC-TELI 57 W 4300 160 650 3000

Unshielded luminaires in three sizes for general service lamps


These luminaires are characterised by the formal unit of glass

and metal, and the material quality of the die-cast aluminium

parts with exquisite surface finishes.

High-quality, three-ply opal glass distributes the light from the

lamps softly and uniformly in the room. Arranged in rows or

groups, the luminaires provide pleasant light.

Unshielded pendant luminaires for general service lamps and fluorescent lamps 660 - 4300 lumen

264

48994895

30°

120cd/klm

5296

30°

90cd/klm

4896

30°

90cd/klm

52515252

30°

120cd/klm

5297

30°

120cd/klm

5253

30°

120cd/klm

Exceptional pendant luminaires in four sizes, made of white or black opal glass.

Luminaires with a common expression of shape but with a different light effect.

Shielded or unshielded.

The luminaires made of white opal glass emit part of the light downwards while the unshielded part of the light

exiting through the glass illuminates the room pleasantly and uniformly.

The inside of the black glass luminaires is also made of white opal glass. Brilliant white light from the lamp is

reflected downwards. Daylight makes this precious material impervious to light and jet black in appearance.

A fascinating spectrum of colours is produced in the light from the lamps, ranging from jet black to discreet

dark blue.

Matching wall luminaires are given on pages 142 and 146.

Fascination »black glass« Pendant luminaires made of hand-blown, three-ply opal glass

265

95 105 125 160

A

B

L


Hand-blown opal glass • white cased • black cased, satin matt

Metal canopy to match the glass • enamel

white or black

L = overall length of the luminaire Cable to match the glass

black opal glass

lamp lumen A B L

5251 1 D 45 40 W 400 95 170 20005252 1 A 60 60 W 710 105 240 20005297 1 A 60 75 W 935 125 285 20005253 1 A 60 100 W 1340 160 370 2000

white opal glass

lamp lumen A B L

4899 1 D 45 40 W 400 95 170 20004895 1 A 60 60 W 710 105 240 20005296 1 A 60 100 W 1340 125 285 20004896 1 A 65 150 W 2160 160 370 2000

266

4941

30°

180cd/klm

4942

30°

180cd/klm

5254

30°

150cd/klm

5255

30°

120cd/klm

Exceptional pendant luminaires made of white or black opal glass.

Luminaires with a common expression of shape but with a different light effect.

Shielded or unshielded.

The luminaires made of white opal glass emit part of the light downwards.

The unshielded light that penetrates through the glass illuminates the room

pleasantly and uniformly.

The inside of the black glass luminaires is also made of white opal glass.

Brilliant white light from the lamp is reflected downwards. Daylight makes this

precious material impervious to light and jet black in appearance. A fascinating

spectrum of colours is produced in the light from the lamps, ranging from jet

black to discreet dark blue.

Fascination »black glass« Pendant luminaires made of hand-blown, three-ply opal glass 400 - 935 lumen

267

A

B

L


Hand-blown opal glass • white cased, satin matt • black cased, satin matt

Aluminium glass holder and canopy • enamel

white aluminium RAL 9006


black opal glass

lamp lumen A B L

5254 1 C 35 40 W 400 115 225 20005255 1 A 60 75 W 935 145 295 2000

white opal glass

lamp lumen A B L

4941 1 C 35 40 W 400 115 225 20004942 1 A 60 75 W 935 145 295 2000

268

Unshielded pendant luminaires 790 - 2160 lumen

Pendant luminaires in different sizes with rod suspension for halogen lamps and general service lamps.

Luminaires with hand-blown, three-ply opal glass, in which a wafer-thin opal glass layer is enclosed

between two crystal glass layers. This produces a highly translucent but opaque glass that distributes

the light very uniformly.

The white inside of the glass reflects the light directly onto the illuminated surface. Part of the light

penetrates the satin matt opal glass body and as unshielded light provides pleasant vertical illuminance

in the room.

These luminaires are impressive for their light effect and high level of visual comfort.

269

A

B

L

120 160 240



Stainless steel parts and canopy

5414 · 5415 rod suspension Ø 8 mm 5416 rod suspension Ø 10 mm




lamp lumen A B L

5414 1 QT 14 60 W 790 120 100 15005415 1 QT 14 75 W 1050 160 150 15505416 1 A 65 150 W 2160 240 240 1680

270

Unshielded pendant luminaires in three sizes for halogen lamps.

Luminaires with stainless steel parts and satin matt crystal glass. The precise light-diffusing texture

of the thick-walled glass provides uniform and pleasant light.

The light is reflected by the inside of the glass and directed onto the illuminated surface. In contrast

to metal reflectors, part of the light penetrates the glass body and is distributed in the room as

unshielded light providing pleasant vertical illuminance.

This luminaire series is complemented by the recessed ceiling luminaires on page 30 and ceiling


These luminaires can be coordinated in terms of technology and design to plan lighting situations

where an overall uniform appearance is required.

Arranged in rows or groups, they are impressive for the striking interplay of unshielded and wide

beam light.

Unshielded pendant luminaires · 790 -1470 lumen

271

A

B

L

140 185 240

Pendant luminaires for halogen lamps

Crystal glass with light-diffusing texture, satin matt

Stainless steel parts and canopy


lamp lumen A B L

5240 1 QT 14 60 W 790 140 210 20005241 1 QT 14 75 W 1050 185 255 20005242 1 QT 32 100 W 1470 240 330 2000

272

A

B

L



Metal parts and metal canopy Surface finish options • chrome • brass • white enamel RAL 9010


Unshielded pendant luminaires in different sizes for general

service lamps. Luminaires with satin matt crystal glass and

perfectly shaped metal parts.

The white inside of the glass reflects the light directly onto the

illuminated surface. In contrast to metal reflectors, part of the

light penetrates the glass body and is distributed in the room

as unshielded light providing pleasant vertical illuminance.

Arranged as single luminaires in private rooms, in rows or in

groups, they are long-lasting and aesthetic elements of interior

design.


chrome brass white lamp lumen A B L

4589 4430 4472 1 A 60 75 W 935 300 200 18004590 4431 4473 1 A 60 100 W 1340 400 270 1800

page 162

273

A

B

L



Metal parts and metal canopy Surface finish options • stainless steel · black cable • brass · white cable • white enamel RAL 9010

white cable



white

lamp

lumen

A

B

L

5207 4565 4566 1 A 60 60 W 710 320 250 18005208 4497 4499 1 A 60 100 W 1340 400 295 18005209 4498 4500 1 A 65 150 W 2160 500 370 1800

page 154

274

Enclosed pendant luminaires in different sizes, light outputs and materials for

halogen lamps and fluorescent lamps.

The luminaires direct the light downwards onto the illuminated surface providing

pleasant illuminance with a high level of visual comfort.

Arranged as single luminaires, in rows or in groups, these luminaires create

impressive, high-contrast ambient lighting.

Shielded pendant luminaires for directed light 790 - 3600 lumen

275

A

B

L



Metal parts and metal canopySurface finish options • matt aluminium

black cable• white enamel RAL 9010

white cable


4615 · 4873 ballasts in canopy


matt aluminium

white

lamp

lumen

A

B

L

4870 4687 1 QT 32 60 W 790 190 170 20004871 4611 1 QT 32 100 W 1470 270 250 20004872 4612 1 QT 32 150 W 2400 350 330 3000

4873 4615 1 TC-D 26 W 1800 270 250 20004874 4616 2 TC-D 26 W 3600 350 330 3000

276

A

B

L



Metal parts and metal canopy Surface finish options • stainless steel • brass



Matching wall luminaires on page 155.

Unshielded luminaires in different sizes for general

service lamps and fluorescent lamps.

Luminaires with hand-blown, three-ply opal glass, in

which a wafer-thin opal glass layer is enclosed between

two crystal glass layers. This produces a highly

translucent but opaque glass that distributes the light

very uniformly.

They are robust and reliable lighting tools that provide

perfect light over long periods of operation.

Perfect proportions and impressive luminaire glass

make these luminaires long-lasting aesthetic elements

of interior design.



lamp

lumen

A

B

L

5289 5288 1 A 60 75 W 935 135 460 2000

5384 5385 1 TC-DEL 13 W 850 135 460 2000

277

A

B

L



Metal parts • white enamel RAL 9010 Glass supports and canopy made of stainless steel

L = overall length of the luminaire Steel cable suspension · transparent cable

Matching wall luminaires on page 148.

lamp lumen A B L

5279 1 C 35 60 W 660 190 350 20005280 1 A 60 100 W 1340 235 440 30005281 1 A 65 150 W 2160 320 560 4000

278

A

B

Pendant luminaires in two shapes, and in different sizes

and materials, available with or without height adjustment.

The luminaires with height adjustment have a steel cable

pendant and transparent cable.

A mechanism allows easy and fast adjustment of the

pendant to the required length.

Luminaires with high-quality satin matt crystal glass and

perfect metal parts.

The light is reflected by the white inside of the glass and

directed onto the illuminated surface. In contrast to metal

reflectors, part of the light penetrates the glass body and

is distributed as unshielded light in the room, providing

pleasant vertical illuminance.

Unshielded and directed light 400 -1470 lumen

The adjustment mechanism of the luminaires allows easy and fast adjustment of the height of the luminaire body at any time. The height of the luminaire can therefore be adjusted to the required conditions of use.

279

L

A

B

A

B

L

matt aluminium

brass

white

lamp

lumen

A

B

L

5395 4771 4770 1 QT 26 60 W 790 180 150 16005396 4773 4772 1 QT 32 100 W 1470 280 220 1600

matt aluminium

brass

white

lamp

lumen

A

B

L

5352 4768 4767 1 D 45 60 W 660 170 155 16005353 4562 4559 1 A 60 75 W 935 295 210 18005354 4563 4560 1 A 60 100 W 1340 395 280 2000



Metal parts and metal canopy Surface finish options • matt aluminium • brass • white enamel RAL 9010


pendant luminaires adjustable in height

matt aluminium lamp lumen A B L

4931 1 D 45 40 W 400 170 155 1200 - 16004932 1 A 60 75 W 935 295 210 1200 - 1600

pendant luminaires adjustable in height

pendant luminaires

pendant luminaires

matt aluminium lamp lumen A B L

4925 1 D 45 40 W 400 180 150 1200 - 16004926 1 A 60 75 W 935 280 220 1200 - 1600

steel cable pendant · infinitely adjustable in height · transparent cable

white cable

white cable

steel cable pendant · infinitely adjustable in height · transparent cable

280

Pendant luminaires in two sizes with a large glass surface and high light outputs.

The unshielded part of the light penetrates the glass body and thanks to the large

illuminated glass surface produces pleasant illuminance in the room. The main

part of the light is reflected by the inside of the outer glass and directed onto

the illuminated surface below the luminaire. Inside partially matt crystal glass

suppresses glare perfectly.

High-quality luminaires providing a high level of ambient light and visual comfort.


281

A

B


outer glass: crystal glass, satin matt, inside white inner glass: crystal glass, partially matt

Metal parts and metal canopy made of stainless steel

Overall length of the luminaire 1800 mm Black cable

Inside partially matt crystal glass suppresses glare perfectly.

lamp lumen A B

4976 1 QT 32 150 W 2400 415 4104977 1 QT 32 250 W 4210 515 470

282

Shielded pendant luminaires in three sizes with high light outputs. Luminaires with a large

metal surface and hand-blown, three-ply opal glass.

The light from the lamp is directed through the opal glass pleasantly and softly onto the

illuminated surface. A metal reflector shields the light to the room.

Luminaires for high-contrast ambient lighting, accentuating the bright horizontal surfaces.

Shielded pendant luminaires 1470 - 4210 lumen

283

A

B



Metal parts and metal canopy Surface finish options • matt aluminium

black cable• white enamel RAL 9010

white cable

Overall length of the luminaire 1800 mm

matt aluminium

white

lamp

lumen

A

B

5298 4690 1 QT 32 100 W 1470 380 1455299 4629 1 QT 32 150 W 2400 450 1705300 4630 1 QT 32 250 W 4210 600 230

284

A

B

Table luminaires in four sizes for general service lamps Safety class II 2


Stainless steel parts

Black cable · 2000 mm

Cable dimmer for infinite light adjustment

The spherical luminaires on this page are available in four diameters – as single luminaire or arranged in groups.

Powerful, unshielded luminaires in different sizes.

Luminaires with hand-blown, three-ply opal glass, in which a wafer-thin opal glass layer is enclosed

between two crystal glass layers. This produces a highly translucent but opaque glass that

distributes the light very uniformly, and this is especially enhanced by the large surface of the

luminaire glass.

Perfect proportions and balance between high-quality metal parts and hand-blown opal glass make

these luminaires aesthetic and long-lasting elements of interior design.

Unshielded table luminaires

lamp lumen A B

6495 1 A 60 100 W 1340 300 2906504 1 A 65 150 W 2160 350 3356503 1 A 65 150 W 2160 400 3906500 1 A 80 200 W 3040 450 440

285

A

B

Table luminaires in two sizes for general service lamps Safety class II 2


Metal parts Surface finish options • chrome • brass


Pull switch

chrome brass lamp lumen A B

6357 6358 1 A 60 75 W 935 210 4506298 6299 1 A 60 100 W 1340 300 600

286

·

B

·

·A··

B

··A·

These impressive, powerful table and floor luminaires are available in

different sizes and materials.

Unshielded luminaires with open crystal glass provide pleasant, soft

light in the room. If you wish to operate the table luminaires on page

287 for long periods, we recommend using economical fluorescent

lamps. These luminaires are impressive for their high material quality

and technical elegance.

Unshielded table luminaires and floor luminaires

s/steel white lamp lumen A B

6489 6485 1 QT 32 150 W 2400 260 16506490 6486 1 QT 32 250 W 4210 330 1750

Floor luminaires for halogen lamps

Open crystal glass, satin matt, inside white

Metal parts Surface finish options • stainless steel • white enamel RAL 9010


Foot-controlled dimmer for infinite light adjustment

287

A

BA

B

lamp lumen A B

6508 4 A 60 75 W 3740 515 1570

lamp lumen A B

6460 2 A 60 75 W 1870 400 5806457 4 A 60 75 W 3740 500 650

6527 1 T16R 40 W 3200 400 5806528 1 T16R 60 W 5000 500 650

table luminaires

floor luminaire

Table and floor luminaires for general service lamps and fluorescent lamps




Table luminaires with pull switch Black cable · 2000 mm

Floor luminaire with built-in touch-controlled dimmer for infinite light adjustment Black cable · 2500 mm

floor luminaire with touch-controlled dimmer

288

A

B

Unshielded table luminaires and floor luminaire. Their light effect is essentially

defined by the illuminated shape of the glass.

The luminaires on this double page are available in different sizes and metal

surfaces. They can be combined well to meet the requirements of the

respective application.

Elegant luminaires – long-lasting elements of interior design.

Unshielded table luminaires and floor luminaire

chrome brass lamp lumen A B

6404 6405 1 A 60 75 W 935 300 4506349 6350 1 A 60 100 W 1340 400 520

Table luminaires for general service lamps


Metal parts Surface finish options • chrome • brass


Wiring set with switch

289

A

B

A

B

s/steel and graphite

lamp

lumen

A

B

6443 1 QT 32 60 W 790 110 4806444 1 QT 32 100 W 1470 155 6206445 1 QT 32 150 W 2400 190 800

Table luminaires and floor luminaire for halogen lamps



Table luminaires with wiring set Black cable · 2000 mm

Floor luminaire with foot-controlled dimmer for infinite light adjustment Black cable · 2500 mm

s/steel and graphite

lamp

lumen

A

B

6476 1 QT 32 150 W 2400 190 1600

table luminaires

floor luminaire

290

A

B

Table luminaires for general service lamps and fluorescent lamps


Metal parts made of • stainless steel • matt brass


Luminaires for general service lamps with built-in touch-controlled dimmer Luminaires for fluorescent lamps with push-button switch


Table luminaires and floor luminaires in the shape of the classic cylinder.

Equipped with open, hand-blown three-ply opal glass. The glass is held by

exquisite and perfectly worked metal parts.

The luminaires on page 290 are available in two sizes and two different surface

finishes either for general service lamps or fluorescent lamps. If you wish to

operate the luminaires for long periods, we recommend using economical

fluorescent lamps.


Luminaires for a maximum wattage of 42 W can also be operated at 32 W

or 26 W.

Timelessly beautiful luminaires – high-quality lighting tools for elegant rooms.


s/steel

matt brass

lamp

lumen

A

B

6515 6512 1 A 60 100 W 1340 220 4106516 6513 1 A 80 200 W 3040 350 650

6517 6514 1 TC-TELI 42 W 3200 350 650

291

B

A

B

A

Table luminaire for halogen lamps Floor luminaire for general service lamps




Table luminaires with cable dimmer for infinite light adjustment

Floor luminaire with rotary dimmer for infinite light adjustment

table luminaire

floor luminaire

lamp lumen A B

6537 3 QT 14 40 W 1380 220 700

lamp lumen A B

6529 4 A 60 100 W 5360 350 1765

292

A

B

A

C

B





Push-button switch in lamp base

Floor luminaire for fluorescent lamps


Metal parts • polished chrome



with touch-controlled dimmer for infinite light adjustment

table luminaires

floor luminaire lamp lumen A B

6477 1 C 35 60 W 660 100 2806478 1 A 60 75 W 935 135 3806479 1 A 60 100 W 1340 160 480

lamp lumen A B C

6536 1 TC-L 55 W 4800 110 1800 340

Luminaires in the shape of the classic cylinder. Unshielded table

luminaires and floor luminaires in different sizes for general service

lamps, halogen lamps and fluorescent lamps.

These luminaires are characterised by the formal unit of glass and

metal, and the material quality of the metal parts with their exquisite

surface finishes. High-quality, three-ply opal glass distributes the

light pleasantly and uniformly in the room.


293

A

B

A

B

Table luminaires and floor luminaires for general service lamps, halogen lamps and fluorescent lamps 6519 · 6525 Safety class II 2




Black cable · 2000 mm Wiring set with switch

6481 foot-controlled dimmer for infinite light adjustment

table luminaires

floor luminaires

lamp lumen A B

6519 1 QT 26 60 W 790 145 5056480 1 A 60 75 W 935 175 720

6525 1 TC-DEL 18 W 1150 175 720

lamp lumen A B

6481 1 A 65 150 W 2160 290 1700

6526 1 TC-L 36 W 2900 290 1700

294

A

B



Safety class II 2

White cable · 2000 mm


These luminaires combine light and glass in a fascinating way. Table luminaires made from

a single piece of hand-blown glass or two large volume glass bodies joined together.

A wafer-thin opal glass layer is enclosed between two crystal glass layers, producing highly

translucent but opaque glass that distributes the light very uniformly.

These impressive examples of the glassmaker’s craftsmanship illuminate the room like sculptures.

Light and glass Unshielded table luminaires

lamp lumen A B

6320 1 A 60 60 W 710 220 2206249 1 A 60 100 W 1340 320 3006287 1 A 65 150 W 2160 400 380

295

A

B

Table luminaires for halogen lamps



White cable · 2000 mm


lamp lumen A B

6534 1 QT 32 100 W + 2 QT 14 40 W 2390 220 3856535 1 QT 32 250 W + 2 QT 26 40 W 5130 350 615

296

360°

A

B

C

Table luminaire with infinitely adjustable light for fluorescent lamps


Metal parts and shield • stainless steel surface finish



Toggle switch on the luminaire

Light aperture 180°, infinitely adjustable 360°

The design and technology of these luminaires allow the light from one light source

to be directed in several directions. The light aperture can be infinitely adjusted

around the luminaire axis. Adjustable light for reading and many areas where the

amount of light needs to be adapted to the requirements of the situation. These

luminaires combine functionality and aesthetics in a distinctive way.

The use of fluorescent lamps makes these luminaires particularly suitable for areas

where long periods of operation are required.

Table luminaires with adjustable shielded light

lamp lumen A B C

6509 1 TC-D 18 W 1200 300 330 120

297

360°360°

C

B

A

360°360°

C

B

A

C

Table luminaires and floor luminaires with luminaire body infinitely adjustable around three axes for halogen lamps and fluorescent lamps


Metal parts and shield • stainless steel surface finish

Luminaires for fluorescent lamps with electronic ballast in plug

6539 · 6540 black cable · 2000 mm 6532 · 6533 black cable · 2500 mm


Light aperture infinitely adjustable 360° Horizontally adjustable and adjustable in height

table luminaires

floor luminaires

lamp lumen A B C

6539 1 QT 26 40 W 460 290 650 1956540 1 TC-S 9 W 600 290 650 195

lamp lumen A B C

6532 1 QT 26 40 W 460 290 1150 2206533 1 TC-S 9 W 600 290 1150 220

298

360°360°

C

B

A

Table luminaires with luminaire body infinitely adjustable around three axes for halogen lamps and fluorescent lamps


Metal parts made of stainless steel

Luminaires for fluorescent lamps with built-in ballast




Table luminaires and floor luminaires. Variability and visual comfort were our

priority in the development of the luminaires on this double page.

Functionality and aesthetics are combined in a distinctive way. Stainless steel

and hand-blown, three-ply opal glass are the materials of these light creations.

The luminaires can be adjusted in height and infinitely adjusted around the

lamp axis and the longitudinal axis. The open glass reflector can be perfectly

positioned to the illuminated surface.

These luminaires are designed for operation with general service lamps or

fluorescent lamps, wherever long periods of operation are required.

Luminaires with adjustable unshielded light

lamp lumen A B C

6518 1 QT 32 100 W 1470 355 650 1956511 1 TC-DEL 18 W 1150 355 650 195

299

360°360°

C

B

A

Floor luminaires with luminaire body infinitely adjustable around three axes for halogen lamps and fluorescent lamps


Metal parts made of stainless steel

Luminaires for fluorescent lamps with built-in ballast




lamp lumen A B C

6521 1 QT 32 100 W 1470 385 1250 2606520 1 TC-DEL 18 W 1150 385 1250 260

300

A

C

B B

0-60°

C

A

B

A

B

CRecessed suspension devicefor pendant luminaires installed in suspended ceilings Max. material thickness of ceiling 30 mm Max. weight of luminaires 10 kg Metal parts · ceiling frame ring with different surface finishes

Pendant shortenerIf pendant luminaires are only required temporarily in reduced overall lengths, the length of the pendant can be adjusted by means of a pendant shortener. Max. weight of luminaire 5 kg Coloured plastic

Canopyfor the installation of pendant luminaires on ceilings or other building structures with a slope of 0° - 60° Metal parts with different enamels

Distributors · Cross-arms · Accessories

Cross-armsfor the installation of three or five pendant luminaires Aluminium with enamel

RAL colours for enamels: white - RAL 9010, white aluminium - RAL 9006, light grey - RAL 7035

Different architectural situations require different installation solutions.

For cases where the canopy, which is a standard part of the cable pendant luminaire, is not used,

or several luminaires need to be installed on one power connection, we have developed a series of

appropriate accessories. We also supply matching devices for the installation of luminaires in rows

or groups to special order.

We will be pleased to assist in your detailed planning.

white

graphite

white aluminium

light grey

A

B

C

5080 5081 5082 5083 120 60 40

white graphite s/steel chrome brass A B C

5043 5044 5095 5046 5045 100 80 60

white A B C

5109 for 3 luminaires 700 300 405110 for 3 luminaires 1000 400 405111 for 5 luminaires 1300 300 405112 for 5 luminaires 1800 400 40

white graphite Ø

5039 5040 45

301

A

B

A

B

A

B

max. 1500

A

B

C

Distributor either for: 3 pendant luminaires max. Ø 400 mm 4 pendant luminaires max. Ø 350 mm 6 pendant luminaires max. Ø 300 mm 8 pendant luminaires max. Ø 250 mm Synthetic material chrome coloured, brass coloured or white

Distributors · round or squarefor arrangements of pendant groups as required Metal cover

Distributor for large luminaire groups

Specially manufactured as required for large pendant groups Metal parts with enamel Available in any RAL colour

Distributorfor 2 to 6 pendant luminaires Max. luminaire diameter 130 mm Metal canopy with enamel

s/steel chrome brass white A B

5093 5022 5023 5034 square 450 x 450 605094 5024 5025 5035 square 600 x 600 605091 5018 5019 5032 round 450 605092 5020 5021 5033 round 600 60

white A B

5036 190 85

chrome brass white A B

5008 5009 5010 420 40

A

5026 special order max. 1500

Power supply unit for LED luminaires 24 V DC

Safety transformer according to DIN EN 61558/VDE 0570 Part 2- 6

230 Vy 50-60 Hz/24 V DC

Encapsuled in cast resin · Safety class II 2 Protection class IP 65

Suitable for operating several LED luminaires. The maximum power of the supply unit must never be exceeded.

power A B C

5096 power supply unit for LED lum. 0 - 20 W 55 215 50

302

Electrotechnical safety

Safety symbols

No thermal insulation material is allowed adjacent to luminaires with this symbol.

Luminaires with this symbol can be installed in or on normal inflammable surfaces; the luminaires may be surrounded by thermal insulation material.

Due to their limited surface temperatures, luminaires with this symbol are suitable for locations subject to fire hazards caused by dust or fibres (VDE 0710 Part 5).

hh

The ENEC symbol (European Norms Electrical Certification) is a European test and certification symbol for luminaires and electrical components in luminaires. The number 10 with or without VDE symbol indicates that the test/certification symbol was awarded by the VDE test and certification institute.

r

The CE symbol is issued on the manufacturer’s own responsibility and is not a safety symbol. The manufacturer documents that the directives of the European Union are observed.

cc

Luminaires with this symbol can be fixed to normal inflammable materials (EN 60598/VDE 0711).

h

The luminaires in this catalogue are designed and manufactured according to the regulations

of EN 60598/VDE 0711. The majority of the luminaires bear corresponding test symbols on

the type plate as well as packing and instructions for use. The remaining luminaires have been

submitted for testing but the test and approval procedure has not yet been completed.

Due to the long period of validity of our catalogue, we are unable to give the current status of

symbol approvals but can provide information on this at any time. Special orders are designed

and manufactured in accordance with the relevant regulations.

All luminaires are subject to constant quality and production control.

Luminaires with this symbol are designed in accordance with EN 60598/VDE 0711 for an ambient temperature of ta 25 °C.

ta

303

Protection classes · Safety classes

Safety classes

Protection classes

Safety class I distinguishes luminaires with an earth connection. Under faulty conditions, the power supply is cut off by an overload device.

Safety class II distinguishes luminaires that, apart from functional insulation, are provided with additional protective insulation. Under faulty conditions, no dangerous voltage can reach metal parts which can be touched. Many luminaires are available in Safety class I and also in Safety class II. Please enquire accordingly.

Safety class III distinguishes luminaires operating on extra-low safety voltage. They can only be connected to safety transformers according to EN 61558/VDE 0570, EN 61347/VDE 712 or VDE 0100 Part 410. Transformers must be approved for the type of installation.

1st digit: foreign body protection

IP 1X against foreign bodies ≥ 50 mm IP 2X against foreign bodies ≥ 12 mm IP 3X against foreign bodies ≥ 2.5 mm IP 4X against foreign bodies ≥ 1 mm

IP 5X against dust

IP 6X dustproof

2nd digit: water protection

IP X1 against vertical drops of water

IP X2 against sloping drops of water up to an angle of 15°

IP X3 against spray water up to an angle of 60°

IP X4 against splash water

IP X5 against jet water

1

65

2

3

7

8444

Our statements concerning the resistance of our luminaires to the penetration of dust, solid

foreign bodies and water are made according to EN 60598/VDE 0711.

The respective degree of protection IP (International Protection) is marked by an IP number

system according to IEC 529.

Please see the table on this page for classification of the degree of protection according to

EN 60598.

304

Luminaires for fluorescent lamps are equipped with low-loss ballasts (LLB)

resp. electronic ballasts (EB) as a standard.

The energy consumption of luminaires with electronic ballasts is distinctly

lower than luminaires with low-loss ballasts.

Fluorescent lamps operated with electronic ballasts have a longer life, are

flicker-free, switch off safely at the end of their life, and are suitable for DC

operation.

Electronic ballasts make a decisive contribution to energy efficiency in

modern lighting systems.

The construction of our luminaires is designed to comply with the

manufacturers’ specifications regarding the life expectancy of the ballasts.

Luminaires with low-loss ballasts, which our factory can supply with fitted

HPF correction capacitors, are marked in the table of contents on pages

308 - 311 by an asterisk (*).

Ballasts · Compensation

Many luminaires in our product range are already equipped with

electronic ballasts as a standard. Luminaires with low-loss ballasts

can be equipped with electronic ballasts on request.

Dimmable luminaires for fluorescent lamps:

analog dimmable 1-10 V or digital dimmable DSI resp. DALI.

The luminaires are wired ready to use for their type of control.

Luminaires for integrating in emergency lighting systems according

to DIN VDE 0108.

Luminaires for connection to a central battery system, with electronic

ballasts, with AC/DC changeover switch, with control module and

additional emergency light lamp holder. Luminaires with integrated

single battery for one or three hours of emergency operation in the

event of a power failure.

We will be pleased to give you details on feasibility and costs.

Special electrical equipment · Emergency light

305

The technical data of our products are subject to alterations due to progress in

development. The instructions for use supplied with the luminaires contain the

respective up-to-date technical information.

On our web site www.glashuette-limburg.com, you will find:

• our luminaires and accessories

• instructions for use in PDF format

• tender texts

Calculation programs

• DIALux for indoor lighting

• luminaire data for DIALux

• luminaire data in EULUMDAT and IES format

Good planning work is required to solve lighting tasks.

The GLASHÜTTE LIMBURG catalogue provides you with information on lamp

data, lumen and light distribution curves for almost all types of luminaire.

Each lighting task has different requirements, depending on many factors such

as reflexion characteristics of the environment, illuminance requirements, colour

rendering etc. A detailed description here would always be incomplete. Our

Light Planning Department is pleased to assist in planning projects according

to your specifications. We develop our suggestions on the basis of our light

calculation programs. They are appropriate, economical and consider design

aspects, too.

We also provide lighting data for luminaires and calculation programs on our

web site at www.glashuette-limburg.com.

Light planning

www.glashuette-limburg.com

306

symbol abbreviation wattage base lumen Osram Philips GE

standard lamps

A 60 40 W E 27 415 CLAS A FR 40 354686 21671

A 60 60 W E 27 710 CLAS A FR 60 354716 21673

A 60 75 W E 27 935 CLAS A FR 75 354747 21675

A 60 100 W E 27 1340 CLAS A FR 100 354778 21677

A 65 150 W E 27 2160 CLAS A FR 150 090492 22568

A 80 200 W E 27 3040 CLAS A FR 200 090591 91128

A 60 60 W E 27 710 CLAS A CL 60 354563 21667

A 60 75 W E 27 935 CLAS A CL 75 354594 21668

A 60 100 W E 27 1340 CLAS A CL 100 354624 21669

A 65 150 W E 27 2160 CLAS A CL 150 056030 22566

A 65 200 W E 27 3040 CLAS A CL 200 024763 91127

drop lamps

D 45 40 W E 14 400 CLAS P FR 40 011978 19789

D 45 60 W E 14 660 CLAS P FR 60 067579 19793

D 45 40 W E 14 400 CLAS P CL 40 011862 19788

candle lamps

C 35 40 W E 14 400 CLAS B FR 40 011336 91323

C 35 60 W E 14 660 CLAS B FR 60 011763 91534

large globe lamps

G 60 60 W E 14 575 – Paulmann Miniglobe 91158

G 95 100 W E 27 1000 G 95 SIL 100 034847 91117

halogen lamps

QT 14 40 W G 9 460 66740 AM 429605 22507

QT 14 60 W G 9 790 66660 AM 429667 10817

QT 14 75 W G 9 1050 66675 AM – 10820

QT 18 40 W B 15d 460 64467 AM – –

lamp length 67mm QT 18 60 W B 15d 790 64481 AM – –

QT 18 60 W B 15d 790 64469 AM – –

QT 18 75 W B 15d 1050 64473 AM 179678 –

lamp length 86mm QT 18 100 W B 15d 1470 64475 AM 179715 –

QT 26 40 W E 14 460 64861 T IM – –

QT 26 60 W E 14 790 64862 T IM – –

QT 32 60 W E 27 790 64472 IM 506634 –

QT 32 75 W E 27 1050 64474 IM – –

QT 32 100 W E 27 1470 64476 IM 506689 –

QT 32 150 W E 27 2400 64478 IM 506719 –

QT 32 250 W E 27 4210 64480 IM – –

Lamp review

This is a lamp review for the luminaires in this catalogue.

Programmes of lamp manufacturers are subject to constant improvements and new developments.

As this catalogue will be valid for a considerable time, we expressly advise you to consult the respectively

valid data sheets issued by the manufacturers. This applies in particular to data relating to the burning

position, operating current and starter characteristics of the lamps. The contents of the table below were

provided by the lamp manufacturers. We assume no liability for the completeness and validity of such

data. In this catalogue the uniform lamp designation system LBS of the electrical industry was used to

specify the lamps and type designations of the different manufacturers.

307

symbol abbreviation wattage base lumen Osram Philips GE

low voltage halogen lamps

QT 9-tr tr = transversal 10 W G 4 130 64415 F – –

QT 9-ax ax = axial 20 W G 4 320 64425 S 402103 35710

QT 12-ax ax = axial 35 W GY 6,35 600 64432 S 402189 35699

compact fluorescent lamps

TC-S 9 W G 23 600 Dulux S 9 W PL- S 9 W F 9 BX/...

TC-S 11 W G 23 900 Dulux S 11 W PL- S 11 W F 11 BX/...

TC-D 10 W G 24 d-1 600 Dulux D 10 W PL-C 10 W F 10 DBX/...




TC-T 13 W GX 24 d-1 900 Dulux T 13 W PL-T 13 W F 13 TBX/...



TC-L 18 W 2 G 11 1200 Dulux L 18 W PL-L 18 W/4p F 18 BX/...





TC-L 80 W 2 G 11 6000 Dulux L 80 W PL-L 80 W/4p –

TC-F 36 W 2 G 10 2800 Dulux F 36 W – –

T16 R 22 W 2 GX 13 1800 FC 22 W TL 5 C 22 W –

T16 R 40 W 2 GX 13 3200 FC 40 W TL 5 C 40 W –

T16 R 55 W 2 GX 13 4200 FC 55 W TL 5 C 55 W –

T16 R 60 W 2 GX 13 5000 – TL 5 C 60 W –

TC-SEL 9 W 2 G 7 600 Dulux S/E 9 W PL-S 9 W/4p F 9 BX/... 4p

TC-SEL 11 W 2 G 7 900 Dulux S/E 11 W PL-S 11 W/4p F 11 BX/... 4p

TC-DEL 10 W G 24 q-1 600 Dulux D/E 10 W PL-C 10 W/4p F 10 DBX/... 4p




TC-TEL 13 W GX 24 q-1 850 Dulux T/E 13 W PL-T 13 W/4p F 13 TBX/... 4p

TC-TELI 18 W GX 24 q-2 1150 Dulux T/E 18 W PL-T TOP 18 W/4p F 18 TBX/... 4p

TC-TELI 26 W GX 24 q-3 1750 Dulux T/E 26 W/IN PL-T TOP 26 W/4p F 26 TBX/... 4p



TC-TELI 57 W GX 24 q-5 4300 Dulux T/E 57 W/IN PL-T TOP 57 W/4p –

TC-TELI 70 W GX 24 q-6 5200 Dulux T/E 70 W/IN – –

fluorescent lamps

T16 24 W G 5 1750 Lumilux T5 HO FQ 24 W Master TL5 HO 24 W F 24 W/T5

T16 39 W G 5 3100 Lumilux T5 HO FQ 39 W Master TL5 HO 39 W F 39 W/T5

discharge lamps

HIE 35 W E 27 2850 HCI-E/P 35 – –

HIE 70 W E 27 6400 HCI-E/P 70 – –

HIE 100 W E 27 8600 HCI-E/P 100 – –

HIE 150 W E 27 13 300 HCI-E/P 150 – –

HIT-TC-CE 20 W GU 6,5 1700 HCI-TF 20 W – CMH20/T/GU6,5

HIT-TC-CE 35 W G 8,5 3400 HCI-TC 35 W CDM-TC 35 W CMH35/TC/G8,5

308

Table of contents · Catalogue of Luminaires 58

luminaire page

10001554 2481555 2481556 2481769 1621770 1621771 1621772 1621773 1621774 162

20002286 1742287 1742460 812461 812462 812474 812808 2172856 2172908 1192909 1192926 1192927 1192991 217

30003073 693074 693086 693123 813124 813125 813126 813147 1673159 953160 953161 953162 953225 1773226 1773230 693231 693232 693298 1703299 1703300 1713301 1713345 1773346 1743348 693349 693389 693390 693429 813487 673488 67

luminaire page3489 673490 673491 673492 673493 673494 673498 673499 673500 673501 673597 1653598 1653599 1653603 1653604 1653605 1653628 2113629 2113630 2113631 2113632 2113633 2113634 2113635 2113636 693638 693640 693667 1633668 1633669* 1633670* 1633671 1633672 1633673* 1633674* 1633683 1753684 1753685 1753686 1753687 1753710 2113711 2113712 2113713 2113714 2113715 2113716 2113717 2113780 1673786 953846 1543847 1543848 1543849 1543856 813858 1753865 1613866 161

luminaire page3870 1613871 1613875 1613876 1613905 1593906 1593907 1593911 1593912 1593913 1593917 1593918 1593919 1593942 2093943 2093944 2093945 2093946 2093949 693968 1653969 1653972 1633973* 1633974 1613975 1613976 1613994 1633995 1633996 1633997 1633998 1633999 163

40004000 1594001 1594002 1594024 1214025 1214035 1174036 1174039 1174040 1174047 1704052 1154053 1154055 1154056 1154057* 1154058* 1154059 1154060 1154061* 1154062* 1154100 2584101 2584102 2584103 258

luminaire page4116 2584117 2584118 2584119 2584120 2584156 2584270 2584341 2584371 2584372 2584373 2584399 2484400 2484410 2584413 2354414 2354415 2354416 2354425 2584430 2724431 2724472 2724473 2724485 2584486 2584487 2584488 2584489 2584490 2584497 2734498 2734499 2734500 2734541 2484542 2484543 2484559 2794560 2794562 2794563 2794565 2734566 2734589 2724590 2724611 2754612 2754615 2754616 2754629 2834630 2834651 2434652 2434653 2434654 2434682 2434683 2434687 2754690 283

luminaire page4710 2604711 2604712 2604713 2604718 2604719 2604720 2604721 2604726 2604727 2604728 2604729 2604753 2584754 2584767 2794768 2794770 2794771 2794772 2794773 2794803 2484809 2194811 2194814 2194833 2294834 2294835 2294836 2294843 2194844 2194845 2194862 2194863 2194866 2194867 2194870 2754871 2754872 2754873 2754874 2754881 2624882 2624883 2624885 2484886 2484895 2654896 2654897 2194898 2484899 2654905 2514906 2514911 2294912 2294918 2634919 2634920 2634925 279

luminaire page4926 2794931 2794932 2794936 2474941 2674942 2674948 2604949 2604950 2604957 2194958 2194959 2194960 2194961 2194962 2194963 2194964 2474966 2604967 2604968 2604969 2604970 2604971 2604972 2604973 2604974 2604975 2604976 2814977 2814979 2514993 2234994 2234995 2234996 2234997 2234998 2234999 223

50005008 3015009 3015010 3015018 3015019 3015020 3015021 3015022 3015023 3015024 3015025 3015026 3015027 2165028 2165029 2165030 2165031 2165032 3015033 301

luminaire page5034 3015035 3015036 3015039 3005040 3005041 2165042 2165043 3005044 3005045 3005046 3005047 335048 335049 335050 335053 1735058 1735059 195060 195061 195062 155063 175064 155066 155067 175068 155069 175070 155071 155072 155073 155074 175075 175076 175077 335078 175079 175080 3005081 3005082 3005083 3005084 355085 355086 355087 155088 155091 3015092 3015093 3015094 3015095 3005096 3015097 195098 215099 215100 215101 215102 216

luminaire page5103 2165104 2165105 2165106 2165107 2165108 2165109 3005110 3005111 3005112 3005200 2235201 2235202 2235203 2235204 2235205 2235206 2235207 2735208 2735209 2735210 2585211 2585212 2585213 2585214 2585215 2585216 2585217 2585218 2585219 2585220 2585221 2585222 2605223 2605224 2605225 2605226 2605227 2605228 2605229 2605230 2605231 2605232 2605233 2605234 2605235 2605236 2605240 2715241 2715242 2715251 2655252 2655253 2655254 2675255 2675257 2215258 2215259 221

309

luminaire page5260 2215261 2215262 2235263 2235264 2235265 2235267 2235268 2235269 2235271 2575272 2375273 2375274 2375275 2375276 2375277 2375278 2375279 2775280 2775281 2775282 2275283 2275284 2275286 2275287 2275288 2765289 2765290 2255291 2255292 2255293 2255294 2235295 2235296 2655297 2655298 2835299 2835300 2835301 2585302 2585303 2585304 2585305 2585306 2585307 2585308 2585309 2585310 2585311 2395312 2395315 2435316 2435317 2435319 2575320 2515321 2515322 2515323 251

luminaire page5324 2515325 2515326 2525327 2525328 2525329 2525330 2525331 2525332 2525333 2525334 2525335 2455336 2455337 2455338 2455339 2255340 2255341 2355342 2355343 2355344 2355345 2295352 2795353 2795354 2795355 2635356 2635357 2635358 2635359 2635360 2635361 2415362 2415363 2415364 2415369 2355370 2355371 2355372 2355373 2355374 2355375 2355376 2355377 2315378 2315379 2315380 2315381 2315382 2315383 2315384 2765385 2765386 2255387 2255388 2435389 2435390 2435391 237

luminaire page5392 2295393 2475394 2475395 2795396 2795397 2605398 2605399 2605400 2605401 2215402 2215403 2215404 2535405 2515406 2525407 2335408 2335409 2335412 2535413 2535414 2695415 2695416 2695417 2555418 2555419 2555420 2555421 2275422 2275423 227

60006249 2946287 2946298 2856299 2856320 2946349 2886350 2886357 2856358 2856404 2886405 2886443 2896444 2896445 2896457 2876460 2876476 2896477 2926478 2926479 2926480 2936481 2936485 2866486 2866489 2866490 286

luminaire page6495 2846500 2846503 2846504 2846508 2876509 2966511 2986512 2906513 2906514 2906515 2906516 2906517 2906518 2986519 2936520 2996521 2996525 2936526 2936527 2876528 2876529 2916532 2976533 2976534 2956535 2956536 2926537 2916539 2976540 2976600 1596601 1596602 1596603 1596604 1596605 1596606 1596607 1596608 1596609 1596610 1596611 1596612 1656613 1656614 1656615 1656616 1656617 1656618 1656619 1656620 1656621 1656622 1616623 1616624 1616625 1616626 1616627 161

luminaire page6628 1616629 1616630 1616631 1616632 1616633 836634 836635 896636 896637 916638 916639 916640 916641 2016642 2016643 2016644 2016645 2016646 2016647 2016648 2016649 1156650 1156651 1156652* 1156653* 1156654 776655 776656 316657 296658 296659 296660 496661 496662 496663 956664 956665 936666 93

70007017 1627018 1627019 1627020 1627023 1177025 1177048 1217049 1217050 717051 717054* 717055* 717057 717058 717061* 717062* 717063 71

luminaire page7064 717067* 717068* 717096 1757097 1757098 1757099 1757100 1757101 1757102 1177103 1177104 1177116 1277117 1277118 1277132 1237133 1237139 717140* 717141 717142* 717143 717144* 717145 2077146 2077147 2077148 2077149 2077150 2077151 2077152 2077153 2077154 2077155 2077156 2077157 1297158 1297159 1297160 1297161 1297162 1297163 1697164 1697165 1697167 1697168 1697169 1697193 1297194 1297195 1297196 1297197 1297198 1297217 1697218 1697219 1697221* 1697222* 169

luminaire page7223* 1697230 1977233 1977236 1977239 1977240 1827241 1827242 1827243 1827244 1827245 1827246 1827247 1827248 1827249 1827250 1827251 1827283* 717284* 717285* 717300 777301 777302 777303 777307* 777312 1517313 1517314 1517315 1517316 1517317 1517318 1517319 1517320 1517321 1517322 1517323 1517328 1937329 1937331 1937332 1937334 1937335 1937337 1937338 1937340 1097341 1097342 1097343* 1097344 1097345 1097346 1097347* 1097348 1097349 1097350 1097351* 1097370 73

luminaire page7371 737372 737373 737374 737375* 737376* 737398 1237399 1237403 1237414 1237422 1937426 1937430 737431 737432 737433 737434 737435* 737436* 737439 1937440 1937441 377443 2077447 717448 717449 717451* 717452* 717453* 717454* 717460 737461 737462 737463 737464 737465 737466* 737468 2077469 2077471 2077472 2077473 2077484 2117485 2117486 2117487 2117488 377489 377490 697491 697492 697493 697498 737499 2057502 2057503 2057506 2057507 71

Not all the models in our production programme are included in this catalogue. If you do not find a particular luminaire number in this table, it may be a new luminaire that is not listed in this catalogue or a luminaire that has been redesigned, and now has a new number. It may also be the number of a luminaire that is no longer produced. Please enquire accordingly.

* luminaires which our factory can supply with fitted HPF correction capacitors

310

Table of contents · Catalogue of Luminaires 58

luminaire page7508 717509 717510 717519 1277521 1277522 1277549 1137550 1137551 1137552 1137553 1137561 1137562 1137563 1137564 1137565 1137566 1137567 1137568 1137569 1137570 1137571 1137572 1137579 1137580 1137581 1137582 1137583 1137584 1137603 377604 1127605 1127606 1127607 1297608 1297609 1297610 1297611 1297612 1297613 1297614 1297616 1977619 1137621 1917622 1917658 2057661 2057669 1257670 1257671 1257674 457675 457676 457677 457685 1577686 1577691 1567692 156

luminaire page7693 377694 377695 377696 377697 377698 377706 1837708 1837713 1577714 1577719 1177720 1177721 1177722 1177734 1567735 1567743 1837745 1837756 657757 657758 657762 657763 657764 657768* 857769* 857770 857771 857772* 857773* 857774 857775 857795 1567796 1567797 657798 657799 657803 337804 337805 337806 337807 337813 337814 337815 337816 337817 337818 337819 337822 337823 337828 1727829 1727830 1727831 1727832 1727833 1727834 173

luminaire page7835 1737836 1737837 1737838 1737839 1737840 1737841 1737842 1737843 457844 457848 457849 457850 457851 457864 777865 777866 777867 777871* 777876 757877 757896 637897 637902 757903 757911 1837913 1837918 757919* 757929 737939 737940 737945 1557947 1557950 637955 337956 337957 337958 337959 177961 177963 177964 157965 157966 157969 1127970 1127971 1127972 457973 457976 857977 857978 197979 197980 197981 197982 197983 19

luminaire page7984 1777985 1777986 177

80008000 2098003 2078006 2078009 938010 938011 938012 938013 938016 958017 958018 958019 958021* 958022* 958023* 958043 1278044 1278045 1278046 1278047 1278048 1278064 378065 378066 378069 2098070 2098090 938091 938092 938094 958095 958096 958097 1478098 1478099 1478100 1918101 758109 158110 158111 178113 178115 178116 158117 158118 158119 158120 158121 1218122 1218123 1618124 1618125 1618140 95

luminaire page8142 778143 778150 1628151 1628152 1628153 1628154 1628155 1548156 1548157 1198158 1198162 178163* 178164 178165* 178166 158167 158168 158169 158170 518171 518172 1398173 1398174 2038175 2038176 2038177 2038178 2038179 2038180 2038181 2038182 2038183 2038184 2038185 2038186 2038187 2038188 2038189 2038190 2038191 2038192 2038193 2038194 2038195 2038196 2038197 2038198 1998199 1998200 1998201 1998202 1998203 1998212 798213 798214 798215 798216 79

luminaire page8217 798218 798219* 798220* 798221* 798222 798223 798224 798225 798226 798227 798228 798229* 798230* 798231* 798242 1868243 1868244 1868254 1878255 1878256 1878260 1898261 1898274 458275 458276 458277 458281 798282 798283 798284 798285 798286 798287 798288 798289 798290 798296 698297 698298 738299 478300 478301 478302 478303 1938304 1938305 1938306 1938307 1938308 1938309 178310 178311 178312 178318 578319 578320 578321 57

luminaire page8322 398323 398328 998329 998330 998331 998332 2158333 2158334 2158335 2158336 158337 158338 158339 158340 938341* 938342 938343 1038344 1038345 1038346* 1038347* 1038353 1798354 1798355 1798364 518365 1398367 1798368 1798369 1798370 1818371 1818372 1818373 1818374 1818375 1818376 318377 318378 358379 358380 358381 358382 358383 358384 998385 998386 998387 998388 2158389 2158390 2158391 2158392 1918396 1898399 278400 278401 278404 27

luminaire page8405 278406 278407* 1038408 1298409 1298410 1298411 1298412 1438413 1438414 498415 498416 498418 498419 498423 998424 998425 998426 998427 2158428 2158429 2158430 2158431 498432 498433 498434 1458435 1458436 1458443 1498444 1498445 1498446 1538447 1538448 1538449 1418450 1418451 1438452 1438453 1238454 1238455 1238457 618458 618459 638460 638461 278462 278463 278464 278465 278466 278467 278468 278469 278470 278471 318472 318473 29

311

luminaire page8474 298475 298476 298477 298478 298479 298480 298481 1118482 1118483 1118484 1118485 1118486 1118487 1118488 1118489 1118490 1118491 1118492 1118493 1118494 1118495 1118496 1118497 1118498 1118499 1118500 1118501 1118502 1118503 1118504 1118508 378511 1538512 1538513 1538514 538515 538516 2138517 2138518 2138519 2138520 2138521 2138522 2138523 2138524 2138525 2138526 2138527 2138528 2138529 2138530 2138531 2138532 1018533 1018535 1018536 1018542 213

luminaire page8543 2138544 2138545 2138546 2138547 2138548 2138549 2138550 778551* 778552* 778553 778554 778555 778556 778557 778558* 778559* 778560 778561 778562 778563 778564 818565 818566 818567 818568 818569 818570 818571 818572 818573 818574* 938575* 938576 538577 538578 538579 538583 758584* 758590 758591* 758592* 758596 1808597 1808598 1808599 1808600 1808601 1808602 718603 718604 718605 718606 718607 718608 718609 718610 718611 71

luminaire page8612 718613 718614 718615 718616 718617 718618 718619 718620 718621 718622 718623 718624 718625 718626 718627 718628 718629 718630 718631 718632 718633 718634 2078635 2078636 2078637 2078639 2038641 2038643 2038645 2038647 2038649 2038668 998669 998670 998671 998672 998673 998674 1338675 1338676 1338677 1338678 1338679 1338680 1338686 438687 438688 438689 558690 558691 558692 1358693 1358694 1358696 1858697 1858698 1858699 185

luminaire page8700 1858701 1858702 1918703 1798704 1798706 1998707 1998708 1998709 1998710 1998711 1998712 1318713 1318714 1318715 1318716 1318717 1318718 438720 1058721 1058723 1058724 1058726 1378727 1378728 2018729 2018730 2018731 2018732 1318733 1318734 1318735 1318736 1318737 1318738 978739 978740 978741 978742 978743 978744 978745 978746 978747 978748 918751 918754 178755 178756 158757 158758 918759 918760 918761 918762 918763 918764 898765 89

luminaire page8766 898767 898772 838773 838774 838775 198776 198777 238778 218779 218780 218781 218782 1518783 1518784 1518785 238786 238787 238789 2018790 2018791 2018792 2018793 818794 818795 698796 698797 698798 698799 698800 698801 698802 698803 698804 698805 698806 698807 698808 698809 698810 698811 698812 698813 698814 698816 338817 338818 338819 338820 1638821 1638822 1638823 1638824* 1638825* 1638826 1178827 1178828 1178829 117

luminaire page8830 658831 658832 658833 678834 678835 678836 678837 658838 658839 658840 658841 658842 658843 678844 678845 678846 678847 678848 678849 678850 678853 1078854 1078855 1078856 1078857 1078858 1078859 418860 418861 418862 418863 418864 438865 638866 638867 638868 638869 1518870 1518871 1518872 1518873 1518874 1218875 1218876 1238877 1238878 1238879 1238880 1238881 1238882 1638883* 1638884 1978885 1978886 1978887 1978889 898890 87

luminaire page8891 878892 878893 878894 878895 878896 878897 878898 878899 878900 878901 878908 878909 878910 878911 878912 878913 878920 538921 538922 538923 538924 1678925 1678926 398927 398928 258929 258930 538931 538932 558933 1058934 1058935 1058936 1058937 1078938 1078939 1078940 1078941 1078942 1078943 1858944 1858945 1858946 1858947 1858948 1858949 1158950 1158951 1158952 1158953* 1158954* 1158955 1158956 1158957 1158958 1158959* 1158960* 115

luminaire page8961 1198962 1198963 838964 1018965 1018966 1178967 1178968 1178969 1178970 1178971 1178972 1178973 1178974 1178975 1178976 1178977 1178978 1178979 598980 598981 598982 1958983 1958984 1958985 1958986 1958987 1958988 878989 878990 878991 878992 878993 878994 1708995 1708996 418997 418998 41

colour gradient glass96057 23196058 23196059 23196060 23196061 23196062 23196063 23196064 23196065 231

Not all the models in our production programme are included in this catalogue. If you do not find a particular luminaire number in this table, it may be a new luminaire that is not listed in this catalogue or a luminaire that has been redesigned, and now has a new number. It may also be the number of a luminaire that is no longer produced. Please enquire accordingly.

* luminaires which our factory can supply with fitted HPF correction capacitors

312

Our deliveries are performed solely in accordance with the »General Conditions of Supply and Delivery for Products and Services of the Electrical Industry« of ZVEI (Association of German Electrical and Electronic Manufacturers) as amended. In addition, the following conditions of sale and delivery apply:

Quotations – All quotations are subject to change without notice.

Deliveries – Deliveries shall be performed »ex factory« for the account and risk of the purchaser. Risk of breakage shall also be borne by the purchaser. If requested, risk of breakage can be assumed by us to the delivery address and charged separately at 1.5 % of the net value of the goods.

Times of delivery – Times of delivery are only binding if expressly confirmed by us. Contrary to the »General Conditions of Supply and Delivery for Products and Services of the Electrical Industry« (ZVEI), damage clams due to delivery delay are excluded if due to slight negligence only on our part. In the event of violation of material contractual obligations, damage clams shall be limited to predictable damage typical for the contract.

Prices – Prices valid at the time of delivery shall apply. Prices are valid for delivery »ex factory« excluding packing plus turnover tax at the legally valid rate. In the case of wholesaler-to-customer sales, outer packing shall be invoiced.

Payment – Our invoices are payable 30 days after invoicing (invoice date) without deduction. Payment shall be deemed made as soon as we have the amount at our disposal. If a purchaser fails to pay within 30 days of the invoice date, the purchaser shall be in default, also without a reminder having been issued. If the date of receipt or receipt of the invoice itself is uncertain, payment shall be due at the latest 30 days after receipt of the goods. Delay shall occur at the latest as of the 31st day following receipt of the goods.

In the event of default in payment, we shall be authorised to invoice statutory default interest according to § 288 BGB [German Civil Code] in connection with § 247 BGB. This shall not affect our right to assert further damages. Contrary to different payment agreements expressly concluded in individual cases, the clams to which we are entitled shall be due immediately, if circumstances arise for the purchaser which make it no longer reasonable to expect the payment agreements concluded shall be met.

Retention of title – The following shall apply in addition to the ZVEI’s general conditions of supply and delivery:

The purchaser shall be authorised to sell goods we supply subject to retention of title in the ordinary course of business, if the purchaser has not agreed on a prohibition of assignment in this respect with its customer. The purchaser now assigns to us by way of security the claim to the purchase price arising from the sale but remains authorised to collect the claims assigned by way of security unless this authorisation is revoked. Authorisation can be revoked if the purchaser negligently fails to meet or no longer meets its contractual obligations. If collection authorisation is revoked, we shall be authorised to notify the purchaser of the assignment made. The purchaser must make the documents required to assign and collect available immediately. In the event of excess security of more than 20 %, the regulation in III. paragraph 1 sentence 2 of ZVEI’s general conditions of sale and delivery shall apply accordingly.

Design – We reserve the right within the scope customary in the trade to make any modifications required in the shape and construction of our products due to technical progress, provided this is not unreasonable for the purchaser in each individual case.

Warranty – In addition to the regulations in VIII. and XI. of the »General Conditions of Supply and Delivery for Products and Services of the Electrical Industry« (ZVEI) the following terms apply:

In addition to VIII. 3. of the above-mentioned conditions of supply and delivery, notification of any defects regarding quantity as well as any visible defects must be given within 7 days of receipt of the delivery. In addition to VIII. 9., the following shall apply regarding the purchaser’s right of recourse against us: In the event of the purchaser’s customer or the customer’s customer making a claim on the purchaser for subsequent performance, the purchaser must give us the opportunity within an appropriate period of time to make subsequent performance ourselves before procuring »replacement« elsewhere. The purchaser must accordingly impose this obligation on its customer. If the purchaser acts in violation of this obligation, we reserve the right to reduce compensation for expenses to the amount which we would have incurred if we had carried out subsequent performance ourselves. § 443 BGB shall not be affected. Furthermore, compensation for expenses due to the purchaser’s subsequent performance with respect to its customer shall be excluded if the purchaser has failed to justifiably refuse this type of subsequent performance or both types of subsequent performance. In addition, Section XI. of the »General Conditions of Supply and Delivery for Products and Services of the Electrical Industry« shall apply to damage claims.

Liability for services – We assume no liability for consequential damages given any defectiveness with respect to draft lighting plans prepared in the preliminary stages of negotiations and provided by us free of charge. If such drafts become in individual cases a condition or integral part of a delivery or service provided by us, this shall require express written agreement.

Use for the intended purpose – According to the Law on the Safety of Appliances and Products, luminaires are technical products and must be used only for their intended purpose. The use of luminaires and accessories other than for their intended purpose and any unauthorised alterations to our luminaires without our express written consent shall release us from any obligation in the event of a claim.

Returns – Returns that are not made subject to the purchaser’s right of withdrawal within the scope of warranty rights shall only be credited with our prior agreement. We shall credit 80 % of the calculated price for undamaged goods in their original packing. Any reconditioning and packing costs as well as transport costs incurred by us shall be deducted in addition and without special notification. Special orders and special electrical productions cannot be returned.

Disposal – Ordering parties which are not private individuals undertake to guarantee the disposal of the products supplied according to the provisions of the »Law on Electrical and Electronic Equipment – ElektroG«. In the case of resale, the ordering party transfers this obligation to its contracting partner.

Exports – The delivery of our products and the submission of quotations thereon to countries outside the European Union – also through third parties – shall require our prior written consent.

Miscellaneous – Place of performance and legal venue is Limburg.

All contractual relations shall be governed by German law.

General Conditions of Sale · Catalogue of Luminaires 58

לימבורג 2009

Documents

Transcript of לימבורג 2009