2001 Prentice Hall, Inc. All rights reserved. Chapter 17 - Web Automation and Networking Outline...

2001 Prentice Hall, Inc. All rights reserved.

Chapter 17 - Web Automation and Networking

Outline17.1 Introduction17.2 Introduction to LPW17.3 LPW Commands17.4 The LPW::Simple Module17.5 HTML Parsing17.6 Introduction to Advanced Networking17.7 Protocols17.8 Transport Control Protocol (TCP)17.9 Simple Mail Transfer Protocol (SMTP)17.10 Post Office Protocol (POP)17.11 Searching the World Wide Web


17.1 Introduction

• Perl– Internet-based language

– Used to create CGI scripts

– Web-related modules

– Automated tasks


17.2 Introduction to LPW

• LWP– Library for the WWW in Perl

• Common use: mimic browser request of a Web page

– Request object• HTTP::Request

– method» One of get, put, post or head

– URL» Address of request item

– headers» Key-value pairs that provide extra information

– content» Data sent from client to server


17.2 Introduction to LPW (II)

– Response object• HTTP::Response

– code» Status indicator for outcome of request

– message» String that corresponds to code

– headers» Additional information about response

» Description of content– content

» Data associated with response


17.2 Introduction to LPW (III)

– User Agent• Usually a Web browser

– timeout» How long user waits before timing out

– agent» Name of the user agent

– from» E-mail address of person using the browser

– credentials» Any usernames or passwords for the response


17.3 LPW Commands

• LWP– Is used to interact programmatically between a Perl program

and a Web server.


Outline1 #!usr/bin/perl

2 # Fig 17.1: fig17_01.pl

3 # Simple LWP commands.

4

5 use strict;

6 use warnings;

7 use LWP::UserAgent;

8

9 my $url = "http://localhost/home.html";

10 open( OUT, ">response.txt" ) or

11 die( "Cannot open OUT file: $!" );

12

13 my $agent = new LWP::UserAgent();

14 my $request = new HTTP::Request( 'GET' => $url );

15 my $response = $agent->request( $request );

16

17 if ( $response->is_success() ) {

18 print( OUT $response->content() );

19 }

20 else {

21 print( OUT "Error: " . $response->status_line() . "\n" );

22 }

23

24 print( OUT "\n------------------------\n" );

25

26 $url = "http://localhost/cgi-bin/fig16_02.pl";

27

fig17_01.pl

This creates a new user agent object

This creates a new request object. The argument indicates that it is a GET request, requesting $url

If there was a response then the program will output the content

If there was no response then it finds out the status of the response


Outline

fig17_01.pl

Program Output

28 $request = new HTTP::Request( 'POST', $url );

29 $request->content_type( 'application/x-www-form-urlencoded' );

30 $request->content( 'type=another' );

31 $response = $agent->request( $request );

32

33 print( OUT $response->as_string() );

34 print( OUT "\n" );

35 close( OUT ) or die( "Cannot close out file : $!" );

<html><title>This is my home page.</title> <body bgcolor = "skyblue"><h1>This is my home page.</h1><b>I enjoy programming, swimming, and dancing.</b><br></br><b><i>Here are some of my favorite links:</i></b><br></br><a href = "http://www.C++.com">programming</a><br></br><a href = "http://www.swimmersworld.com">swimming</a><br></br><a href = "http://www.abt.org">dancing</a><br></br></body></html>------------------------

Creates a new request to POSTDetermines how the response will be encodedGets the agents request and

prints it out as a string


Outline

fig17_01.pl

Program Output

HTTP/1.1 200 OKConnection: closeDate: Tue, 21 Nov 2000 15:20:19 GMTServer: Apache/1.3.12 (Win32)Content-Type: text/htmlClient-Date: Tue, 21 Nov 2000 15:20:19 GMTClient-Peer: 127.0.0.1:80Title: Your Style Page <html><head><title>Your StylePage</title></head><body bgcolor = "#ffffc0" text = "#ee82ee" link = "#3cb371" vlink = "#3cb371"><p>This is your style page.</p><p>You chose the colors.</p><a href = "/fig16_01.html">Choose a newstyle.</a></body></html>


17.3 LPW Commands

Fig. 17.2 Contents of home.html.

<html> <title>This is my home page.</title> <body bgcolor = "skyblue"> <h1>This is my home page.</h1> <b>I enjoy programming, swimming, and dancing.</b> <br></br> <b><i>Here are some of my favorite links:</i></b> <br></br> <a href = "http://www.C++.com">programming</a> <br></br> <a href = "http://www.swimmersworld.com">swimming</a> <br></br> <a href = "http://www.abt.org">dancing</a> <br></br> </body></html>


17.4 The LPW::Simple Module

• LPW::Simple module– Provides procedural interface to LPW


Outline

fig17_03.pl

Program Output

1 #!usr/bin/per; 2 # Fig 17.3: fig17_03.pl 3 # A program that uses LWP::Simple 4 5 use strict; 6 use warnings; 7 use LPW::Simple; 8 9 my $url = "HTTP://localhost/home.html";10 my $page = get( $url );11 print( “\n$page\n\n" );12 my $status = getprint( $url );13 print( "\n\n$status\n" );14 $status = getstore( $url, "page.txt" )15 print( "\n$status\n" )

<html><title>This is my home page.</title> <body bgcolor = "skyblue"><h1>This is my home page.</h1><b>I enjoy programming, swimming, and dancing.</b><br></br><b><i>Here are some of my favorite links:</i></b><br></br><a href = "http://www.C++.com">programming</a><br></br><a href = "http://www.swimmersworld.com">swimming</a><br></br><a href = "http://www.abt.org">dancing</a><br></br></body></html>

Retrieves a Web page and stores its contents in a scalar

Gets the Web page and stores it into a file


Outline

fig17_03.pl

Program Output

<html> <title>This is my home page.</title> <body bgcolor = "skyblue"><h1>This is my home page.</h1><b>I enjoy programming, swimming, and dancing.</b><br></br> <b><i>Here are some of my favorite links:</i></b><br></br><a href = "http://www.C++.com">programming</a><br></br><a href = "http://www.swimmersworld.com">swimming</a><br></br><a href = "http://www.abt.org">dancing</a><br></br></body></html> 200 200


17.5 HTML Parsing

• HTML::TokeParser– Way of extracting HTML easily

– Can walk through manually but TokeParser is simpler

• Token– Array references

– 5 types• Start token (S)

– starting HTML tag

• End token (E)

– Array holding the tag, the name, and the original text

• Text token (T)

• Comment token (C)

• Declaration token (D)


17.5 HTML Parsing

Fig. 17.4 Resulting page.txt file.

<html><title>This is my home page.</title> <body bgcolor = "skyblue"><h1>This is my home page.</h1><b>I enjoy programming, swimming, and dancing.</b><br></br> <b><i>Here are some of my favorite links:</i></b><br></br><a href = "http://www.C++.com">programming</a><br></br><a href = "http://www.swimmersworld.com">swimming</a><br></br><a href = "http://www.abt.org">dancing</a><br></br></body></html>


Outline

fig17_05.pl

1 #!/usr/bin/perl

2 # Fig 17.5: fig17_05.pl

3 # A program to strip tags from an HTML document.

4

5 use strict;

6 use warnings;

7 use LWP::UserAgent;

8 use HTML::TokeParser;

9

10 my $url = "http://localhost/home.html";

11 my $agent = new LWP::UserAgent();

12 my $request = new HTTP::Request( 'GET' => $url );

13 my $response = $agent->request( $request );

14 my $document = $response->content();

15

16 my $page = new HTML::TokeParser( \$document );

17

18 while ( my $token = $page->get_token() ) {

19 my $type = shift( @{ $token } );

20 my $text = shift( @{ $token } );

21

22 if ( $type eq "T" ) {

23 print( "$text" );

24 }

25 }

Gets a Web page and stores its contents to $document

Creates a new TokeParser object

Goes through the tokens to display the text


Outline

fig17_05.pl

Program Output

This is my home page. This is my home page.I enjoy programming, swimming, and dancing. Here are some of my favorite links: programming swimming dancing


17.6 Introduction to Advanced Networking

• Sockets– All network communications are done with sockets

– 1 connection = 2 sockets

– Allows date to be passed• Streams

– Sequenced

– Reliable

• Datagrams

– Less reliable

– Not sequenced

– Require less system resources

» Connection is not permanent


17.6 Introduction to Advanced Networking (II)

• Server– One endpoint / socket

– Listens for a connection

– Knows how to process requests

• Client– Other endpoint / socket

– Knows the server

– Initiates the connection

– Sends a request


17.7 Protocols

• Standardization Protocols– Need to be standardized or else server would have to know

how to process each individual request

– HTTP (Chapter 7)

– POP• receiving e-mail

– STMP• sending e-mail


17.8 Transport Control Protocol (TCP)

• Internet connections– TCP

• Most general way for computers to talk

• Connection-oriented


Outline1 #!/usr/bin/perl

3 # TCP chat client.

4

5 use strict;

6 use warnings;

7 use IO::Socket;

8

9 my $host = '192.168.1.71';

10 my $port = 5833;

11

12 my $socket = new IO::Socket::INET(

13 PeerAddr => $host,

14 PeerPort => $port,

15 Proto => "tcp",

17 or die( "Cannot connect to $host:$port : $@\n" );

18

20 print( $socket "What is your name?\n" );

21 print( "What is your name?\n" );

22

23 my $response = <$socket>;

24 print( "From server: $response" );

25

26 my $input = <STDIN>;

27

28 chomp( $input );

29

2 # Fig 17.6: fig17_06.pl

19 local $| = 1;

16 Type => SOCK_STREAM )

fig17_06.pl

Initializes the location of the server

Creates the Internet connection, will make a socket and automatically connect if server is found

Turns off line buffering


Outline

fig17_06.pl

30 while ( $input ne "q" ) {

31 print( $socket "$input\n" );

32 $response = <$socket>;

33 print( "From server: $response" );

34

35 $input = <STDIN>;

36 chomp( $input );

37 }

38

39 print( "done\n" );

40 print( $socket "$input\n" );

41

42 close ( $socket ) or die( "Cannot close socket: $!" );

The user enters ‘q’ to close the connection


Outline

4

8

10

16

18

21

24

28

32 }3334 close ( $server ) or die( "Cannot end connection: $!" );

31 print( "From client: $response\n" );30 chomp( $response );29 $response = <$client>;

27 print( $client "$input" );26 my $input = <STDIN>;25 while ( $response ne "q" ) {

23 print( "From client: $response\n" );22 chomp $response;

20 my $response = <$client>;19 my $client = $server->accept();

17 local $| = 1;

15 or die( "Cannot be a server on $port: $@\n" );14 Listen => 10 )13 Type => SOCK_STREAM,12 LocalPort => $port,11 my $server = new IO::Socket::INET(

9 my $port = 5833;

7 use IO::Socket;6 use warnings;5 use strict;

3 # TCP chat server.2 # Fig 17.7: fig17_07.pl1 #!/usr/bin/perl

fig17_07.pl

Specifies the port to check for a client

Creates a new socket object

Listen makes the server wait for a connection and specifies that 10 clients can be waiting to connect


Outline

fig17_07.pl

Program Output


17.9 Simple Mail Transfer Protocol (SMTP)

• Net::SMTP module


Outline

3029 print( textfield( "subject" ), br() );

28 print("Enter what you want to appear in the \"subject\" header:");2726 print( textfield( "to" ), br() );25 print( "Enter what you want to appear in the \"to\" header: " );2423 print( textfield( "address" ), br() );22 print( "Enter where you would like to send this e-mail: " );2120 print( textfield( "from" ), br() );

19 print( "Enter what you want to appear in the \"from\" header: " );1817 print( textfield( "server" ), br() );16 print( "Enter the SMTP server to connect to: " ); 1514 print( start_form( -action => "fig17_09.pl" ) );1312 print( h1( "The e-mail home page." ) );1110 print( start_html( "Send e-mail!" ) );9 print( header() );87 use CGI qw( :standard );6 use warnings;5 use strict;43 # Form to send an e-mail message.2 # Fig. 17.8: fig17_08.pl1 #!/usr/bin/perl

fig17_08.pl

Gets the STMP server

Gets the address to send the e-mail to


Outline

38 print( end_html() );3736 print( br(), submit( "submit" ), end_form() );3534 -wrap => 1 ), br() );33 print( textarea( -name => "message", -rows => 5, -columns => 50, 32 print( br() );31 print( "Enter the message you want to send in the e-mail: " );

fig17_08.pl

Program Output


Outline

30 $smtp->quit();29 $smtp->dataend();28 $smtp->datasend( "$message\n" );27 $smtp->datasend( "Subject: $subject\n\n" );26 $smtp->datasend( "To: $to\n" );25 $smtp->datasend( "From: $from\n" );24 $smtp->data();2322 $smtp->to( "$address" );21 $smtp->mail( "$my_address" );2019 or die( "Cannot send e-mail: $!" );18 my $smtp = new Net::SMTP( "$server", Hello => "$server" )1716 my $my_address = 'my_address.smtp';15 my $message = param( "message" );14 my $subject = param( "subject" );13 my $to = param( "to" );12 my $address = param( "address" );11 my $from = param( "from" );10 my $server = param( "server" );98 use CGI qw( :standard );7 use Net::SMTP;6 use warnings;5 use strict;43 # Send an e-mail message.2 # Fig 17.9: fig17_09.pl1 #!/usr/bin/perl

fig17_09.pl

Creates a new Net::SMTP object

The mail method creates an e-mail message, takes address of sender

The to method is who the receiver of the email is

Starts and stops the transfer of data


Outline

35 print( end_html() );34 print( h1( "Your e-mail has been sent." ) );33 print( start_html( "Send e-mail!" ) );32 print( header() );31

fig17_09.pl


17.10 Post Office Protocol (POP)

• POP– Created to make the storage and retrieval of e-mail easier

– Allow checking, reading, storing and deleting of mail


Outline

25 print( end_html() );

24

23 FORM

22 </form>

21 <input type = "reset" value = "reset">

20 <input type = "submit" value = "check mail">

19 <input name = "offset" value = "0" type = "hidden">

18 <input name = "server" type = "text" size = "20"></p>

17 <p>Server:

16 <input name = "password" type = "password" size = "20"></p>

15 <p>Password:

14 <input name = "userName" type = "text" size = "20"></p>

13 <p>Username:

12 <form action = "fig17_11.pl" method = "post">

11 print <<FORM;

10

9 print( start_html( -title => 'Please Login' ) );

8 print( header() );

7

6 use CGI qw( :standard );

5 use warnings;

4 use strict;

3

2 # Fig. 17.10: fig17_10.pl

1 #!/usr/bin/perl

fig17_10.pl

Creates an HTML page that asks for a username and password and then the IP address of the server


Outline

fig17_10.pl


Outline

3130 print( "<p>$_: " );29 for ( $start .. $end ) {2827 my $end = ( $offset2 < $messages ? $offset2 : $messages );26 my $start = 1 + $offset;25 my $offset2 = $offset + 5;24 my $offset1 = $offset - 5;23 print( "<p>You have $messages messages in your inbox.</p>" );22 my $messages = $pop->Count();2120 print( h1( "Cannot connect: $!" ) );19 PASSWORD => $password, HOST => $server ) or18 my $pop = new Mail::POP3Client( USER => $user, 1716 print( start_html( -title => "Check your mail!" ) );15 print( header() );1413 my $offset = param( "offset" );12 my $server = param( "server" );11 my $password = param( "password" );10 my $user = param( "userName" );98 use CGI qw( :standard );7 use Mail::POP3Client;6 use MD5;5 use warnings;4 use strict;32 # Fig. 17.11: fig17_11.pl1 #!/usr/bin/perl

fig17_11.pl

Gets the parameters from the user entered Web data

Allows only a total of 5 messages to be displayed at once

A tally of the messages in the inbox


Outline34 }35

37 }3839 print <<FORM1 if ( $offset );

41 <input name = "userName" value = $user type = "hidden"> 42 <input name = "password" value = $password type = "hidden"> 43 <input name = "server" value = $server type = "hidden"> 44 <input name = "offset" value = $offset1 type = "hidden"> 45 <input type = "submit" value = "See previous 5">46 </form>47 FORM14849 print <<FORM2 if ( $end != $messages );

51 <input name = "userName" value = $user type = "hidden"> 50 <form action = "fig17_11.pl" method = "post">

52 <input name = "password" value = $password type = "hidden"> 53 <input name = "server" value = $server type = "hidden"> 54 <input name = "offset" value = $offset2 type = "hidden"> 55 <input type = "submit" value = "See next 5">

61 $pop->Close();

60


5857 FORM256 </form>

32 foreach ( $pop->Head( $_ ) ) {

36 print( "</p>\n" );

40 <form action = "fig17_11.pl" method = "post">

33 /^(From|subject):\s+/i and print $_, "<br/>";

fig17_11.plGoes through the headers of each message

The next 5 messages to be shown


Outline

fig17_11.pl

Program Output


Outline

fig17_11.pl


17.11 Searching the World Wide Web

• Searching– A major application of the Web

– Perl has several modules for searching


Outline

3332 print( "WebCrawler", br() );31 print( "name = \"WebCrawler\" value = \"1\">" );

30 print( "<input type = \"checkbox\" " ); 2928 print( "HotBot", br() );27 print( "name = \"HotBot\" value = \"1\">" );26 print( "<input type = \"checkbox\" " ); 2524 print( "AltaVista", br() );23 print( "name = \"AltaVista\" value = \"1\">" );22 print( "<input type = \"checkbox\" " ); 2120 print( textfield( "amount" ), br(), br() );19 print( "from each search engine, 1-50: " );18 print( br() );17 print( "Enter number of sites you want " );1615 print( textfield( "query" ), br(), br() );14 print( "Enter query: " );13

12 print( start_form( -method =>"post",-action =>"fig17_13.pl" ));1110 print( h1( "Search the Web!" ) );9 print( header(), start_html( "Web Search" ) );87 use CGI qw( :standard );6 use warnings;5 use strict;43 # Program to begin a Web search.2 # Fig. 17.12: fig17_12.pl1 #!/usr/bin/perl

fig17_12.pl

What topic is to be searched for

How many results the user desires to be returned

Allows the user to check which of the 4 engines to use


Outline

fig17_12.pl

Program Output

34 print( "<input type = \"checkbox\" " );

35 print( "name = \"NorthernLight\" value = \"1\">" );

36 print( "NorthernLight", br() );

37

38 print( br(), submit( "Search!" ), end_form() );

39



Outline1 #!/usr/bin/perl

3 # A program that collects search results.

4

5 use strict;

6 use warnings;

7 use WWW::Search;

8 use CGI qw( :standard );

9

10 my @engines;

11 my $search;

12

13 my $query = param( "query" );

14 my $amount = param( "amount" );

15

17 print( header(), start_html() );

18 print( h1( "Please try again." ) );


21 exit();

22 }

23

24 if ( !$amount || $amount > 50 ) {

25 $amount = 5;

26 }

27

28 my $value;

29

16 if ( !$query ) {

2 # Fig 17.13: fig17_13.pl

19 print( "<a href = \"/cgi-bin/fig17_12.pl\">Go back</a>" );

fig17_13.pl

Allows a large use of search engines

Displays if the user did not enter any input

If there is no amount or it is greater than 50 then set it to 5


Outline31 push( @engines, "HotBot" ) if ( param( "HotBot" ) );

30 push( @engines, "AltaVista" ) if ( param( "AltaVista" ) );

32 push( @engines, "WebCrawler" ) if ( param( "WebCrawler" ) );

33 push( @engines, "NorthernLight" ) if ( param( "NorthernLight" ) );

34

35 print( header() );

36 print( start_html( "Web Search" ) );

37

38 foreach ( @engines ) {

39 my $search = new WWW::Search( $_ );

40 $search->native_query( WWW::Search::escape_query( $query ) );

42

43 for ( 1 .. $amount ) {

44 my $result = $search->next_result();

45 $value = $result->url();

46 print( "<a href = $value>$value</a>" );

47 print( br() );

48 }

49

50 print( br() );

51 }

52


41 print( b( i( "Web sites found by $_:" ) ), br() );

fig17_13.pl

Insert the engines into the array if the user checked them

Displays the results

Searches the Web for results


Outline

fig17_13.pl

2001 Prentice Hall, Inc. All rights reserved. Chapter 17 - Web Automation and Networking Outline...

Documents

Transcript of 2001 Prentice Hall, Inc. All rights reserved. Chapter 17 - Web Automation and Networking Outline...