نموذج رقم (13) · Web viewتبلغ مدة التدريب الصيفي (60) ستون...

الميكانيكية القوى هندسة لبرنامج دراسى برنامج Novemberتوصيف2016

Form no. (13)

Program Specification for Mechanical Power Engineering Program

Pharos University in AlexandriaUniversity/ Academy:Faculty of EngineeringFaculty/Institute:Mechanical EngineeringDepartment :Prof. Dr. Alaa ShiblProgram Coordinator26/10/2010Data of approval

A-Basic Information:

Mechanical power EngineeringProgram :1.

DoubleProgram Type:2.

Mechanical EngineeringDepartment3.The National Academic Reference Standards (NARS) for the Computer Engineering program approved on August 2009.

Adopted Academic standards4.

B-Specialized Information :

1. Program Objectives :

1-1 Vision of the department:

The vision of Mechanical Power Engineering program is to qualify the graduates to be pioneers in the field of Mechanical Power Engineering and its applications. Program aims to implant self learning methods to make the graduates familiar with the latest technologies. In addition, it provides scientific advice to all institutions working in the field of Mechanical Engineering.

1-2 Mission of the department:

الميكانيكية - - 1 الهندسة قسم الهندسة كلية باإلسكندرية فاروس جامعة


The mission of Mechanical Power Engineering program is to expand the horizon of knowledge among students through continuous research and development and technology transfer to serve the needs of the community through the cooperation with the industrial sector and the government. The program seeks to create a climate develops the ability to conduct advanced scientific research and establishes the concept of ethics and sense of belonging to society.

1-3 Aims of the department

The objectives of the Mechanical power engineering program are to provide the labor market in Egypt and the Arab world with qualified mechanical engineers by applying a deep working knowledge of technical fundamentals in areas related to mechanical, electromechanical and thermal systems to address needs of the customer and society, developing innovative technologies and find solutions to engineering problems, and leading in the conception, design, and implementation of new products, processes, services, and systems

1-4 Attributes of the Graduates of Mechanical Power Engineering :

By the end of his study the graduate of mechanical power engineering program must be able:

a) Apply knowledge of mathematics, science and engineering concepts to the solution of engineering problems.

b) Design a system; component and process to meet the required needs within realistic constraints.

c) Design and conduct experiments as well as analyze and interpret data.d) Identify, formulate and solve fundamental engineering problems.e) Use the techniques, skills, and appropriate engineering tools, necessary for

engineering practice and project management.f) Work effectively within multi-disciplinary teams.g) Communicate effectively. h) Consider the impacts of engineering solutions on society & environment.i) Demonstrate knowledge of contemporary engineering issues.j) Display professional and ethical responsibilities; and contextual understandingk) Engage in self- and life- long learning.l) Evaluate the sustainability and environmental issues related to mechanical power

systems. m) Use energy efficiently.n) Apply industrial safety.

2 الميكانيكية - - الهندسة قسم الهندسة كلية فاروسباإلسكندرية جامعة


o) Apply and integrate knowledge, understanding and skills of different subjects and available computer software to solve real problems in industries and power stations.

p) Lead or supervise a group of engineers, technicians and work force.q) Carry out preliminary designs of fluid transmission and power systems,

investigate their performance and solve their essential operational problems.

r) Design, operate and maintain internal combustion and steam engines.

2. Program Intended Learning Outcomes (ILOs)

According to the National Academic Reference Standards (NARS) for the Mechanical

Engineering program approved on August 2009.

2-1 Knowledge and Understanding

On successful completion of the program, graduates from Mechanical Power Engineering specialization will show ability to understand and Know the:

A1.Concepts and theories of mathematics and sciences, appropriate to the discipline.

A2.Basics of information and communication technology (ICT).

A3.Characteristics of engineering materials related to the discipline.

A4.Principles of design including elements design, process and/or a system related to specific disciplines.

A5.Methodologies of solving engineering problems, data collection and interpretation

A6.Quality assurance systems, codes of practice and standards, health and safety requirements and environmental issues.

A7.Business and management principles relevant to engineering.

A8.Current engineering technologies as related to disciplines.

A9.Topics related to humanitarian interests and moral issues.

A10. Technical language and report writing

A11. Professional ethics and impacts of engineering solutions on society and environment

A12. Contemporary engineering topics.

A13. Fundamentals of thermal and fluid processes.



A14. Internal combustion, pumps, turbines and compressors, classification, construction design concepts, operation and characteristics.

A15. Fluid power systems.

A16. The constraints which mechanical power and energy engineers have to judge to reach at an optimum solution.

A17. Business and management techniques and practices appropriate to mechanical power and energy engineering applications.

A18. Mechanical power and energy engineering contemporary issues.

A19. Basic theories and principles of some other engineering and mechanical engineering disciplines providing support to mechanical power and energy disciplines.

2-2 Intellectual Skills

On Successful completion of the Mechanical Power engineering program, graduates must be able to:

B1.Select appropriate mathematical and computer-based methods for modelling and analyzing problems.

B2.Select appropriate solutions for engineering problems based on analytical thinking.

B3.Think in a creative and innovative way in problem solving and design.

B4.Combine, exchange, and assess different ideas, views, and knowledge from a range of sources.

B5.Assess and evaluate the characteristics and performance of components, systems and processes.

B6.Investigate the failure of components, systems, and processes.

B7.Solve engineering problems, often on the basis of limited and possibly contradicting information.

B8.Select and appraise appropriate ICT tools to a variety of engineering problems.

B9.Judge engineering decisions considering balanced costs, benefits, safety, quality, reliability, and environmental impact.

B10. Incorporate economic, societal, environmental dimensions and risk management in design.

B11. Analyze results of numerical models and assess their limitations.



B12. Create systematic and methodic approaches when dealing with new and advancing technology.

B13. Evaluate mechanical power and energy engineering designs, processes and performances and propose improvements.

B14. Analyze and interpret data, and design experiments to obtain new data.

B15. Evaluate the power losses in the fluid transmission lines and networks.

B16. Analyze the performance of the basic types of internal combustion engines and hydraulic machines.

B17. Analysis of fluid power systems, subsystems and various control valves and actuators.

2-3 Professional and Practical Skills

On Successful completion of the Mechanical Power engineering program, graduates will demonstrate ability to:

C1.Apply knowledge of mathematics, science, information technology, design, business context and engineering practice integrally to solve engineering problems.

C2.Professionally merge the engineering knowledge, understanding, and feedback to improve design, products and/or services.

C3.Create and/or re-design a process, component or system, and carry out specialized engineering designs.

C4.Practice the neatness and aesthetics in design and approach.

C5.Use computational facilities and techniques, measuring instruments, workshops and laboratory equipment to design experiments, collect, analyze and interpret results.

C6.Use a wide range of analytical tools, techniques, equipment, and software packages pertaining to the discipline and develop required computer programs.

C7.Apply numerical modelling methods to engineering problems.

C8.Apply safe systems at work and observe the appropriate steps to manage risks.

C9.Demonstrate basic organizational and project management skills.

C10. Apply quality assurance procedures and follow codes and standards.

C11. Exchange knowledge and skills with engineering community and industry.

C12. Prepare and present technical reports.

C13. Use basic workshop equipment safely and appropriately.



C14. Prepare engineering drawings, computer graphics and specialized technical reports.

C15. Write computer programs pertaining to mechanical power and energy engineering.

C16. Describe the basic Thermal and fluid processes mathematically and uses the computer software for their simulation and analysis.

C17. Design, operate, repair and maintain fluid hydraulic power systems for diverse applications.

C18. Carry out preliminary designs of fluid transmission networks, internal combustion and steam engines and solve their operational problems.

C19. Work in mechanical power and energy operations, maintenance and overhaul.

2-4 General and Transferable Skills

On Successful completion of the Mechanical Power engineering program, graduates will demonstrate ability to:

D1.Collaborate effectively within multidisciplinary team.

D2.Work in stressful environment and within constraints.

D3.Communicate effectively.

D4.Demonstrate efficient IT capabilities.

D5.Lead and motivate individuals.

D6.Effectively manage tasks, time, and resources.

D7.Search for information and engage in life-long self learning discipline.

D8.Acquire entrepreneurial skills.

D9.Refer to relevant literatures.

3. National Academic Reference Standards (NARS) For Mechanical power

And Energy Engineers Program

3.1 KNOWLEDGE AND UNDERSTANDING:

The graduates of the engineering programs should be able to demonstrate the knowledge and understanding of:

1.1. Concepts and theories of mathematics and sciences, appropriate to the discipline.

1.2. Basics of information and communication technology (ICT)



1.3. Characteristics of engineering materials related to the discipline.

1.4. Principles of design including elements design, process and/or a system related to specific disciplines.

1.5. Methodologies of solving engineering problems, data collection andinterpretation

1.6. Quality assurance systems, codes of practice and standards, health andsafety requirements and environmental issues.

1.7. Business and management principles relevant to engineering.

1.8. Current engineering technologies as related to disciplines.

1.9. Topics related to humanitarian interests and moral issues.

1.10. Technical language and report writing

1.11. Professional ethics and impacts of engineering solutions on society and environment

1.12. Contemporary engineering topics.

In addition to the knowledge and understanding of engineers, the graduates of mechanical power and energy engineering program should demonstrate knowledge and understanding of:

1.13. Fundamentals of thermal and fluid processes

1.14. Internal combustion, pumps, turbines and compressors, classification, construction design concepts, operation and characteristics

1.15. Fluid power systems

1.16. The constraints, which mechanical power and energy engineers have to judge to reach at an optimum solution.

1.17. Business and management techniques and practices appropriate to mechanical power and energy engineering applications.

1.18. Mechanical power and energy engineering contemporary issues.

1.19. Basic theories and principles of some other engineering and mechanical engineering disciplines providing support to mechanical power and energy disciplines.

3.2 INTELLECTUAL SKILLS



The graduates of the engineering programs should be able to:2.1. Select appropriate mathematical and computer-based methods for modelling

and analyzing problems.2.2. Select appropriate solutions for engineering problems based on analytical

thinking.2.3. Think in a creative and innovative way in problem solving and design.2.4. Combine, exchange, and assess different ideas, views, and knowledge from a

range of sources.2.5. Assess and evaluate the characteristics and performance of components,

systems and processes.2.6. Investigate the failure of components, systems, and processes.2.7. Solve engineering problems, often on the basis of limited and possibly

contradicting information.2.8. Select and appraise appropriate ICT tools to a variety of engineering problems.2.9. Judge engineering decisions considering balanced costs, benefits, safety,

quality, reliability, and environmental impact.2.10. Incorporate economic, societal, environmental dimensions and risk

management in design.2.11. Analyze results of numerical models and assess their limitations.2.12. Create systematic and methodic approaches when dealing with new and

advancing technology.

In addition to the intellectual skills of engineers, the graduates of mechanical power and energy engineering program should be able to:

2.13. Evaluate mechanical power and energy engineering designs, processes and performances and propose improvements.

2.14. Analyze and interpret data, and design experiments to obtain new data.

2.15. Evaluate the power losses in the fluid transmission lines and networks

2.16. Analyze the performance of the basic types of internal combustion engines and hydraulic machines

2.17. Analysis of fluid power systems, subsystems and various control valves and actuators

3.3 PRACTICAL & PROFESSIONAL SKILLS

The graduates of the engineering programs should be able to:



3.1. Apply knowledge of mathematics, science, information technology, design, business context and engineering practice integrally to solve engineering problems.

3.2. Professionally merge the engineering knowledge, understanding, and feedback to improve design, products and/or services.

3.3. Create and/or re-design a process, component or system, and carry out specialized engineering designs.

3.4. Practice the neatness and aesthetics in design and approach.

3.5. Use computational facilities and techniques, measuring instruments, workshops and laboratory equipment to design experiments, collect, analyse and interpret results.

3.6. Use a wide range of analytical tools, techniques, equipment, and software packages pertaining to the discipline and develop required computer programs.

3.7. Apply numerical modeling methods to engineering problems.

3.8. Apply safe systems at work and observe the appropriate steps to manage risks.

3.9. Demonstrate basic organizational and project management skills.

3.10. Apply quality assurance procedures and follow codes and standards.

3.11. Exchange knowledge and skills with engineering community and industry.

3.12. Prepare and present technical reports.

In addition to the practical and professional skills of engineers, the graduates of mechanical power and energy engineering program should be able to:

3.13. Use basic workshop equipment safely and appropriately.

3.14. Prepare engineering drawings, computer graphics and specialized technical reports.

3.15. Write computer programs pertaining to mechanical power and energy engineering.

3.16. Describe the basic Thermal and fluid processes mathematically and uses the computer software for their simulation and analysis



3.17. Design, operate, repair and maintain fluid hydraulic power systems for diverse applications

3.18. Carry out preliminary designs of fluid transmission networks, internal combustion and steam engines and solve their operational problems.

3.19. Work in mechanical power and energy operations, maintenance and overhaul.

3.4 GENERAL AND TRANSFERABLE SKILLS

The graduates of the engineering programs should be able to:

4.1. Collaborate effectively within multidisciplinary team.

4.2. Work in stressful environment and within constraints.

4.3. Communicate effectively.

4.4. Demonstrate efficient IT capabilities.

4.5. Lead and motivate individuals.

4.6. Effectively manage tasks, time, and resources.

4.7. Search for information and engage in life-long self learning discipline.

4.8. Acquire entrepreneurial skills.

4.9. Refer to relevant literatures.


الميكانيكية القوى هندسة لبرنامج دراسى برنامج November 2016توصيف

Program ILOs NARS

(PROGRAM ) Knowledge and Understanding

(NA

RS)

Kno

wle

dge

and

Und

erst

andi

ng

A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A191.1. 1.2. 1.3. 1.4. 1.5. 1.6. 1.7. 1.8. 1.9. 1.10. 1.11. 1.12. 1.13. 1.14. 1.15. 1.16. 1.17. 1.18. 1.19.


الميكانيكية القوى هندسة لبرنامج دراسى برنامج توصيفNovember 2016

Program ILOs NARS

(PROGRAM) INTELLECTUAL SKILLS

(NA

RS)

Kno

wle

dge

and

Und

erst

andi

ng B1 B2 B3 B4 B5 B6 B7 B8 B9 B10 B11 B12 B13 B14 B15 B16 B17

2.1.

2.2.

2.3.

2.4.

2.5.

2.6.

2.7.

2.8.

2.9.



2.10.

2.11.

2.12.

2.13.

2.14.

2.15.

2.16.

2.17. Program ILOs NARS

(PROGRAM) PRACTICAL & PROFESSIONAL SKILLS

(NA

RS)

C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 C15 C16 C17 C18 C193.1. 3.2. 3.3. 3.4.



Kno

wle

dge

and

Und

erst

andi

ng

3.5. 3.6. 3.7. 3.8. 3.9. 3.10. 3.11. 3.12. 3.13. 3.14. 3.15. 3.16. 3.17. 3.18. 3.19.

Program ILOs NARS

(PROGRAM) GENERAL AND TRANSFERABLE SKILLS



(NA

RS)

Kno

wle

dge

and

Und

erst

andi

ng D1 D2 D3 D4 D5 D6 D7 D8 D9

4.1.

4.2.

4.3.

4.4.

4.5.

4.6.

4.7.

4.8.

4.9.



4. Program Contents ( البرنامج محتويات و ( هيكل

مستويات 4-1 خمسة على موزعة المعتمدة الساعات نظام على يعتمد البرنامجدراسية) Five Academic Levelsدراسية( فصول عشرة )).Academic Semesters 10أو

و 4-2 قوى تخصصهندسة الهندسة كلية البكالوريوسمن درجة على للحصول يشترطعن تقل ال فترةدراسية الطالب يقضى أن الفصول 5تحكم من ً عددا و سنوات

عن يقل ال الساعات , 10الدراسية من عدد بنجاح الطالب فيها يحقق فصولعن تقل ال تراكمى 182المعتمدة بمعدل .2ساعة األقل على

المعتمدة (.4-3 الساعات ) :Credit Hoursعدد

Cr 15ختياريإCr 167إلزامي Cr 182إجمالى

المعتمدة الساعات من التخرج اإلجمالىمتطلباتالجامعة إجبارية متطلبات 12متطلبات

51الكلية متطلبات

إجبارية 33متطلبات

علوم ( إختيارية متطلبات6إنسانية)

اإلجبارية المتطلباتالقسم 80متطلبات

122التخصص 42متطلبات

للتخصص اإلختيارية 9المتطلبات

المعتمدة الساعات من التخرج متطلبات 182إجمالى



على 4 -4 مقسمة البرنامج دراسية محتويات مستويات دراسية :خمسة فصول عشرة و1 st Year (Semester-1)

Code Course Title

Cre

dit

Teaching Subject Area

Lec

ture

Tut

oria

l

Prac

tical

Hum

&So

c

Mat

h &

Bas

ic

Bas

ic E

ngin

eeri

ng

App

lied

Eng

inee

ring

Com

p. A

pp &

IT

Proj

ect&

Prac

tice

Dis

cret

iona

ry

UGE01 English Language (1) 2 1 0 2 2

UEC01Computer kills and programming concepts (1)

2 1 0 2 2

BE101 Engineering Mathematics (1) 3 3 2 1 3

BE111 Engineering Mechanics (1) 3 3 2 0 3

BE121 Engineering Physics (1) 3 3 1 1 3

BE141Engineering Drawing &Descriptive Geometry (1)

3 2 4 0 3

HU 121 History of Engineering & Technology 2 2 0 2 2

18 15 9 8 4 12 2



1 st Year (Semester-2)

CodeCourse Title Credit

TeachingSubject Area

Lecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering

BE102Engineering Mathematics (2)

33213

BE112Engineering Mechanics (2)

22202

BE122Engineering Physics (2)32123

BE142Engineering Drawing & Descriptive Geometry (2)

32313

BE131General Chemistry22022

ME170Introduction to Manufacturing Processes

22022

UEC 02EComputer Skills and Programming concepts (2)

21022

UGE 02English language (2)21022

191581221322



2 nd Year (Semester-3)



Lecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering


33203

BE113Engineering Mechanics (3)

33203

ME203Mechanical Drawing21302

ME211Mechanics of Materials44114

EE208Fundamentals of Electrical Engineering

33113

ME270Materials Engineering22022

EGE 03English language (3)21022

1917962611



2 nd Year (Semester-4)



Lecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering

BE 104Linear Algebra32213


33203

ME 212Mechanics of Machinery

33113

ME 251Fluid Mechanics (1)32213

ME 210Computer Aided Mechanical Drawing

21132

ME 271Manufacturing Processes (1)

33023

UGA 03Arabic language22002

19168826632



3 rd Year (Semester-5)



Lecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering

BE 207Numerical Analysis with MATLAB

32223

ME213Mechanical Design (1)43214

ME 214Mechanical Vibrations33113

ME 230Thermodynamics (1)33113

EE369Electrical Power for Mechanical Engineers

33113

HU134Engineering economy22102

1816861332



3 rd Year (Semester-6)



Lecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering

BE 209Complex Variables33103

ME 215Mechanical Design (2)33203

ME 221Automatic Control43214

ME 231Heat Transfer (1)33113

ME 252Engineering Fluid Mechanics

43214

ME 272Manufacturing. Processes(2)

33023

20188533743



4 th Year (Semester-7)



Lecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering

ME 220Measurement and Sensors

43124

ME232Thermodynamics (2)33203

ME234Heat Exchangers33113

MEME ELECTIVE (1)

Table 133203

ME233Heat Transfer (2)33113

HU131Project Management22102

1817849423






Lecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering

ME 253Fluid Mechanics (2)

33203

ME331Thermal Power Plants Equipment

33113

ME201Fundamentals of Combustion Engineering

33113

MEME ELECTIVE (2)

Table 133113

ME 240Refrigeration and Air Conditioning(1)

33113

HU113Technical Report Writing And Presentation Skills

22022

1717663122





TeachingSubject AreaL

ecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering

ME341Controls &Safety Of Thermal Systems

33113

ME241Refrigeration &Air Conditioning (2)

33113

ME 343Air Conditioning Systems

33203

ME254Compressible Flow33203

HUHU ELECTIVE (1)

Table 222102

ME400-1Graduation Project (1)43034

1817752349





TeachingSubject AreaL

ecture

Tutorial

Practical

Hum

&Soc

Math &

Basic

Basic E

ngineering

ME ME ELECTIVE (3)

Table 133203

UC01Communication Skills22002

ME256Power Generation by Fluids

33203

HUHU ELECTIVE (2)

Table 222102

HUHU ELECTIVE (3)

Table 222002

ME400-2Graduation Project (2)43034

161553637



Table 1: elective courses of Mechanical power program: (Group-A):

Code No.Course TitleCrME 255Pipeline Fundamentals3

ME 257Computer Applications in Fluid Mechanics3

ME 258Environmental Fluid Mechanics3

ME 306Gas turbines3

ME 332Power Plant Operation and Management3

ME 333Renewable energy and storage systems3

ME 340Thermal System Design and Optimization3

ME 342Industrial Ventilation3

ME 345Applications in Refrigeration3

ME 346Applications in Air Conditioning3

ME 347Trouble shooting & Maintenance of air conditioning Systems3

ME 352Pipeline Technology3

ME 355Hydraulic Equipment3

ME 356Multi-Phase Flow3

ME 357Applied Piping Systems3

ME 358Maintenance of Fluid Systems3

ME 359Valves Technology3

Total of selected two courses6



Table 2: Faculty elective courses

CodeSubjectsCr. Hrs.HU 131Project Management2CrHU 132Accounting and Costs for Engineers2CrHU 133Engineering Statistics2CrHU 134Engineering Economy2CrHU 135Sales, Marketing and Communication Techniques2CrHU 142Legislations and Contracts2CrHU 143Principles of Law2CrHU 144Communications Laws and Rules2CrHU 151Industrial Safety2CrHU 161Environment and Society2CrHU 162Human Computer Interaction2CrHU 163Astronomy and Space Sciences2CrHU 164Research Methods2CrHU 170Risk Management2CrHU141Ethics and human rights2Cr

الطالب يختارها التي المعتمدة الساعات 6Crمجموع

4-5 ) بإجمالى المعتمدة الساعات ) 182توزيع طبقا بالموضوعات معتمدة ساعةالمرجعية ( القومية األكاديمية )Credits by Topics of NARSللمعايير



SemesterCredit

Subject Area

Hum

&So

c

Mat

h &

Bas

ic S

cien

ce

1st18412--2--

2nd192132-2--

3rd192611----

4th1926632--

5th18--13-3-2

6th20-33743-

7th18---9423

8th17--3122--

9th182--3-49

10th166--3-7-

Program in Cr18218403837191614

Program in per100%9.8921.9720.8820.3310.448.797.69

NARS in per9-12%20-26%20-23%20-22%9-11%8-10%6-8%



الصيفية .5 العطلة الميدانىخالل : التدريب

) الصيفي التدريب مدة (60تبلغ أو) يوما على ثمانية) 8ستون توزع اسابيعالمرحلة الى الطالب وصول حتى األولى المرحلة من الصيفية العطل

ويستمر. شهرأبريل بداية في عادةً الصيفي للتدريب التسجيل ويبدأ الرابعةالصيفي التدريب لجنة تقوم إذ الثاني، الدراسي الفصل من مايو شهر لنهاية

التقييم أستمارات مع الطلبة وأرسال التدريب جهة بمفاتحت القسم في . طالب بكل الخاصة

لتوفير المجتمعية األطراف ولجان بالكلية األقسام رؤساء مع التنسيق يتملجنة خالل من الهندسية بالمؤسسات للطالب العملى التدريب فرص

وارسال التدريب بجهة بالتصال تقوم اليى للطالب العملىالصيفى التدريب. طالب بكل الخاصة التقييم استمارات مع الطلبة

برنامج تنفيذ اثناء األداء وتقييم الطالب متابعة تقارير نماذج اعداد يتمالعملى التدريب برامج مشرفى مع التنسيق ويتم العملى، التدريبالبرنامج تنفيذ في التدريبية الجهة جدية لمتابعة الهندسية بالمؤسسات

على والتعود الدوام في الطالب التزام مدى ومتابعة المعتمد العملى. العمل في والجدية االنضباط

وتحديد التدريبية البرامج فاعلية مدى لقياس للطالب استبيانات اعداد يتم. معارفه وتعميق مهنيا الطالب تهيئة تعوق التي المشاكل

األقسام معامل في للطالب الداخلى التدريب برامج بإعداد الكلية تقوم كماالعلمية األقسام رؤساء مع بالتنسيق الصيفية االجازة خالل المختلفة العلمية

. بالكلية المادية واالمكانيات الهندسية والورش المعامل ولجنة جهـــة لـــــــدى المـحــــددة التــدريب فتــرة يقضي ان الطالب وعلى

إدارة قبــل مـــن عليهــا الموافقــة تمت أو لــــه عــينت التــي التــدريبالحصول بعــد إال أخرى جهة إلـى االنتقــال وعـــدم الصيفـــي التدريببالكليــة الصيفـــي التدريب إدارة مــن كل من رسميـــة موافقـــة علــى

. جهــة لـــدى العمــل وأنظمـــة بقـواعــــد وااللتزام التدريـــب وجهـــةلكتابــة. الالزمة والعناصر المعلومات بجمع الطالب يقــوم وان التدريــب

. الصيفـــي للتدريــب النهائــي التقريـر

المقررات .6 : محتويات



المقررات توصيف استمارات و الالئحة فى وارد هو لما Form(طبقاno.10: Course Specification(

رقم 1 -6 كودأوالمقرر:

بالفقرة( ورد لما )5-3طبقا

6-2: المقرر بالفقرة( اسم ورد لما )5-3طبقا

الالئحةو( المحتويات :6-3 مذكورفى هو لما طبقا المحتويات تفاصيل- رقم المقررات توصيف )10إستمارات

بالبرنامج .7 االلتحاق : متطلبات

بالبرنامج اإللتحاق و متطلبات الخاصة للجامعات األعلى المجلس لتعليمات طبقا: كاآلتى الجامعة شروط و قواعد

( المصرية، ( المدارس من رياضيات العامة الثانوية اتمام شهادة على الحصول

. المصرية للجامعات المجلساألعلى من بها معترف معادلة شهادة أو

يحددها التى للقواعد بالكلية القبول شروط الخاصة تخضع الجامعات مجلس

. األهلية و

التى للقواعد المصريين غير للطالب بالنسبة بالكلية القبول شروط تخضع

األهلية . و الخاصة الجامعات مجلس و العالى التعليم وزارة تحددها

. الجامعة تضعها التى والشروط والقواعد المتطلبات كافة تحقيق

. الطالب لجميع أساسى شرط للدراسة الكامل التفرغ

كاآلتى 7-1 موزعة األكاديمية الساعات من التخرج : متطلبات

المعتمدة الساعات من التخرج اإلجمالىمتطلباتالجامعة إجبارية متطلبات 12متطلبات

51الكلية متطلبات

إجبارية 33متطلبات

علوم ( إختيارية 6 متطلبات



إنسانية)

اإلجبارية المتطلباتالقسم 80متطلبات

122التخصص 42متطلبات

للتخصص اإلختيارية 9المتطلبات

المعتمدة الساعات من التخرج متطلبات 182إجمالى

الصيفى التدريب فترة أدائه يفيد ما الطالب يقدم ان او 60البد يوما8. أسابيع

البرنامج .8 إلستكمال المنظمة : القواعد

( الثانى ( و األول الباب للكلية الداخلية الالئحة فى المذكورة للمتطلبات .طبقا

الهندسة فى البكالوريوس درجة على الحصول و التخرج متطلبات إلستكمال

( بما ( الحصول بنجاح الطالب يتم أن يجب ميكانيكية قوى تخصص الميكانيكية

عن يقل على 182ال موزعة أكاديمية أعوام خمسة خالل معتمدة ساعة

. دراسية فصول عشرة

) يساوى أو أعلى تراكمى معدل بمتوسط المتفوقين للطالب إتمام) 3.5يمكن

فصول ( تسعة يوازى بما نصف و أكاديمية أعوام أربعة خالل التخرج متطلبات

دراسية).



بالبرنامج .9 الملتحقين تقييم وقواعد طرق

التقويم طريقةMethod of Assessment

المستهدفة التعليمية المخرجات من تقيسه ماAs Measured by ILOs

تحريرية -1 إمتحاناتWritten Exams

Knowledge and understanding skillsIntellectual skillsProfessional and Practical skills

2-

اإلختبارات تقييمالمعملية

Practical Lab Assessment

Knowledge and understanding skillsIntellectual skillsProfessional and Practical skillsGeneral skills

3-

اإلمتحاناتالقصيرة

Quizzes


تكليفات تقييمالطالب

Assignment problems solution


الحاسب تطبيقاتاآللى

IT-application labs


المشروعاتالصغيرة

Mini-projects




4

مشروع مناقشةالتخرج

(GRADUATION PROJECTS)


البرنامج .10 تقويم : طرق

بالتقويم العينةالوسيلةالقائمالنهائية -1 الفرقة Questionnaires & MeetingsAll studentsطالب

Program coordinator ,Meetingالخريجون-2staff member & Questionnaires

10% of all students

3-االعمال أصحاب

Program coordinator, Reports ,Questionnaires &

Meetings

Stack holders

خارجى -4 Report for Revising final yearممتحنexams

One external examiner

خارجى -5 للمرحلة مراجع خارجى مراجع نموذجنموذج ( األولى )14الجامعية

One external reviewer

)professor(

داخلى -6 داخلى مراجع مراجع One internal reviewerنموذج

)professor(

البرنامج عن :-المسئول

/ شبل. عالء د أ( الميكانيكية( الهندسة رئيسقسم

الكلية عميد :-إعتماد



. على. أبو جابر محمد د أ


نموذج رقم (13) · Web viewتبلغ مدة التدريب الصيفي (60) ستون...

Documents

Transcript of نموذج رقم (13) · Web viewتبلغ مدة التدريب الصيفي (60) ستون...