Disclaimer · 08.06.2018 · Burnham-on-Sea, Somerset United Kingdom ASTM B117 Standard practice...
Transcript of Disclaimer · 08.06.2018 · Burnham-on-Sea, Somerset United Kingdom ASTM B117 Standard practice...
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
276086 2MATECH AUBIERE CEDEX France AITM 3-0013 Testing of susceptibility to exfolation corrosion in 2XXX and 7XXX series wrought aluminium alloy products Low Qualified
276086 2MATECH AUBIERE CEDEX France ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified
276086 2MATECH AUBIERE CEDEX France ASTM E112 Determining average grain size Low Qualified Aluminium, Titane, Acier, Nickel, Cuivreux
276086 2MATECH AUBIERE CEDEX France ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
276086 2MATECH AUBIERE CEDEX France ASTM E407 Microetching metals and alloys Low Qualified
276086 2MATECH AUBIERE CEDEX France ASTM E8 Tension testing of metallic materials Low Authorised to proceed Dec-18 Restriction: Not Qualified for Young's Modulus
276086 2MATECH AUBIERE CEDEX France ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified Aluminium
276086 2MATECH AUBIERE CEDEX France ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified Aluminium
276086 2MATECH AUBIERE CEDEX France ASTM G67 Determining the susceptibility to intergranular corrosion of 5XXX series aluminium alloys by mass loss after exposure to nitric acid (NAMLT test) Low Qualified
276086 2MATECH AUBIERE CEDEX France EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Authorised to proceed Dec-18 Restriction: Not Qualified for Young's Modulus
276086 2MATECH AUBIERE CEDEX France EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified
276086 2MATECH AUBIERE CEDEX France EN 2716 (Pren) Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products - AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys Low Qualified
276086 2MATECH AUBIERE CEDEX France EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified Titane
276086 2MATECH AUBIERE CEDEX France ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Qualified Tous types
276086 2MATECH AUBIERE CEDEX France ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid
medium by measurement of loss in mass (Huey test)Low Qualified Aciers inoxydables
276086 2MATECH AUBIERE CEDEX France ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in
media containing sulfuric acidLow Qualified Aciers inoxydables
276086 2MATECH AUBIERE CEDEX France ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified Aluminium, Titane, Acier, Nickel, Cuivreux
276086 2MATECH AUBIERE CEDEX France ISO 6506 (ASTM E10) Brinell hardness test Low Qualified Tous types
276086 2MATECH AUBIERE CEDEX France ISO 6507 (ASTM E92) Vickers hardness test Low Qualified Tous types
276086 2MATECH AUBIERE CEDEX France ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified Tous types
276086 2MATECH AUBIERE CEDEX France ISO 9220 Metallic coatings - Measurement of coating thickness - Scanning electron microscope method Low Qualified
276086 2MATECH AUBIERE CEDEX France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified Tous types
306756 ACCUFLEET TESTING SERVICES, INC. Houston, TX USA AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified
306756 ACCUFLEET TESTING SERVICES, INC. Houston, TX USA AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Disqualified
306756 ACCUFLEET TESTING SERVICES, INC. Houston, TX USA AITM 2-0009 Fire resistance of aircraft seat cushion utilizing a high density open flame High Authorised to proceed Dec-18 Pending QCS
306756 ACCUFLEET TESTING SERVICES, INC. Houston, TX USA AITM 2-0010 Fire resistance of aircraft cargo component lining materials utilizing a high density open flame High Disqualified
306756 ACCUFLEET TESTING SERVICES, INC. Houston, TX USA AITM 2-0056 Determination of burn through resistance characteristics of thermal / acoustic insulation materials High Disqualified
312060 ACEM.S.L. Madrid Spain AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified Also according to I+D-E 246
312060 ACEM.S.L. Madrid Spain AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Authorised to proceed Dec-18
312060 ACEM.S.L. Madrid Spain ASTM E8 Tension testing of metallic materials Low Qualified
312060 ACEM.S.L. Madrid Spain EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
312060 ACEM.S.L. Madrid Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified Also according to I+D-E 31
312060 ACEM.S.L. Madrid Spain ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
312060 ACEM.S.L. Madrid Spain ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
312060 ACEM.S.L. Madrid Spain ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
312060 ACEM.S.L. Madrid Spain Z_Combustion Analysis by combustion Qualified C and S
312060 ACEM.S.L. Madrid Spain Z_Glow Discharge Mass Spectroscopy Spectrometry: glow discharge Qualified
312060 ACEM.S.L. Madrid Spain Z_IGF Inert gas fusion Qualified
312060 ACEM.S.L. Madrid Spain Z_Opt. metallo. Optical metallography Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
308133 AEPI do Brasil Ind. e Com. Ltda. Itapevi Brasil EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom AITM 2-0024 Determination of adhesion by wet tape testing Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom AITM 3-0038 Determination of non-volatile-residue Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ASTM B487 Measurement of metal and oxide coating thicknesses by microscopical examination of a cross-section Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ASTM D1125 Standard Test Methods for Electrical Conductivity and Resistivity of Water Low Authorised to proceed Dec-18 Method A only
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ASTM D1293 Standard Test Methods for pH of Water Low Authorised to proceed Dec-18 Method A only
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ASTM D3359 Measuring adhesion by tape test Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ASTM E3 Standard guide for preparation of metallographic specimens Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ASTM E384 Microindentation hardness of materials Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ASTM E70 pH of aqueous solutions with the glass electrode Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 1518 Paints and varnishes - Scratch test Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 2106 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 2409 Paints and varnishes - Cross-cut test Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 2808 Paints and varnishes - Determination of film thickness Low Authorised to proceed Dec-18 Eddy current method only
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 6507 (ASTM E92) Vickers hardness test Low Authorised to proceed Dec-18 Restricted to ASTM E92 for microhardness only.
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom QVA-Z09-07-27 Determination of Chromium (VI) in surface treatment baths Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom QVA-Z09-07-28 Determination of Aluminium in acid surface treatment baths Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom QVA-Z09-07-29 Determination of Copper in acide surface treatment baths Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom QVA-Z09-07-34 Determination of Zinc in in acid surface treatment baths Low Authorised to proceed Dec-18
294328 AEROFIN LABORATORIES LTD. Burnham-on-Sea, Somerset United Kingdom QVA-Z09-07-36 Determination of Hydroxide in alkaline cleaning baths Low Authorised to proceed Dec-18
300081 AEROTECH LABORATORIES Ltd COVENTRY United Kingdom AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified Tartaric / sulphuric acid anodising solution
300081 AEROTECH LABORATORIES Ltd COVENTRY United Kingdom AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
300081 AEROTECH LABORATORIES Ltd COVENTRY United Kingdom AITM 3-0038 Determination of non-volatile-residue Low Qualified
300081 AEROTECH LABORATORIES Ltd COVENTRY United Kingdom ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
300081 AEROTECH LABORATORIES Ltd COVENTRY United Kingdom ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified Also according to QVA-Z10-59-01 (restricted to Legacy Programs)
300081 AEROTECH LABORATORIES Ltd COVENTRY United Kingdom Z_Spectro Analysis by spectrometry (others) QualifiedChemical processing electrolytes, cleaners, stripping solutions, etches,
passivation solutions, effluents and wastewater.
277064 AIM AEROSPACE, INC. Renton USA AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low QualifiedQualified Test Chamber Id: BUNSEN 1
rmcaps, leather, Composites, plastics, paints etc.
The list it monthly updated
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIES
All rights reserved
Airbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
* Alerting/informing Airbus in case of:
- significant events or- identified risks with potential impact on Airbus
- consistently unsatisfactory quality results or
- the test facility is either unwilling or unable to implement a corrective action plan within a reasonable time-scale
DisclaimerThis is the Airbus Qualified Test Method List (Register of Qualified Couples <Test Method / Test Facility>)
Publication of this list neither engages Airbus in any contract relationship/responsibility nor allows automatic contract authorization, ordering, etc.All subcontractors using qualified couples 'Test Method & Test Facility' from the Airbus QTML remain responsible of the quality of their products.
As consequence, they shall conduct:
Page 1 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
277064 AIM AEROSPACE, INC. Renton USA AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low QualifiedQualified Test Chamber Id: BUNSEN 2
Leather, adhesives etc
277064 AIM AEROSPACE, INC. Renton USA AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low QualifiedQualified Test Chamber Id: BUNSEN 2
Composite Laminate and Sandwich Panels
277064 AIM AEROSPACE, INC. Renton USA AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High Qualified
QCS150910
Qualified Test Chamber Id: ME-1200 SER# 0004
Armcaps, leather, Composites, plastics, paints etc.
277064 AIM AEROSPACE, INC. Renton USA AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Qualified
QCS150969
Qualified Test Chamber Id: ME-1100 SER# 002
Armcaps, leather, Composites, plastics, paints etc.
RESTRICTED TO USE OF NEW EQUIPMENT
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified Interior Furnishings
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified Interior Furnishings
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified Interior Furnishings
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Qualified Interior Furnishings
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High QualifiedQCS 150891
Interior Furnishings
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High QualifiedQCS150968
Interior Furnishings
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Dec-18Interior Furnishings
QCS Pending
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Qualified Interior Furnishings
135583 AIM COMPOSITES LIMITED CAMBRIDGE United Kingdom AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High Authorised to proceed Dec-18Interior Furnishings
QCS Pending
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 03-02-018 Manufacture of structural sandwich parts with thermosetting fibre reinforced skins High Qualified ME1330208 grandfathering
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 03-02-019 Manufacture of monolithic parts with thermoset prepreg materials High Qualified ME1330208 grandfathering
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 03-02-020 Manufacturing of monolithic parts with thermoplastic material Low Qualified ME1330208 grandfathering
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 03-02-022 Manufacturing of monolithic and sandwich structural components by impregnation of dry reinforcement materials with thermoset resin High Qualified ME1330208 grandfathering
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 03-08-003 Rework and repair of Structures Manufactured from Composite Materials (Laminates and Sandwich) High Qualified ME1330208 grandfathering
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 06-01-003 Surface preparation for thermosetting parts before structural bonding High Qualified ME1330208 grandfathering
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 06-01-004 Mechanical surface preparation of non-structural adherend prior to adhesive bonding Low Qualified ME1330208 grandfathering
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 06-02-002 Non-structural adhesive bonding Low Qualified ME1330208 grandfathering
291189 AIRBORNE COMPOSITES S.L. Girona Spain AIPS/AIPI 06-02-006 Structural bonding of thermoset and thermoplastic matrices compocite parts High Qualified ME1330208 grandfathering
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain AITM 2-0010 Fire resistance of aircraft cargo component lining materials utilizing a high density open flame High Qualified QCS Pending
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain ISO 2685 Aircraft – Environmental test procedure for airborne equipment – Resistance to fire in designated fire zones High Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain TT1 Major Test Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain TT2 Component & Large Sub-component Test Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain TT4 Bespoke Test Bench Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain TT6 High Frequency Test Qualified
146561 AIRBUS DEFENCE AND SPACE S.A.U. AIRBUS MILITARY GETAFE GETAFE Spain TT8 Standard Test Bench <= 5 MN Qualified
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High QualifiedQCS C-T-00006, I1
Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Qualified
QCS C-T-00009_I1
QCS C-T-00010_I1
Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0009 Fire resistance of aircraft seat cushion utilizing a high density open flame High Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0010 Fire resistance of aircraft cargo component lining materials utilizing a high density open flame High Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0053 Determination of flammability and flame propagation of thermal / acoustic insulation materials - Radiant panel test High QualifiedQCS C-T-00011_I1
Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 2-0056 Determination of burn through resistance characteristics of thermal / acoustic insulation materials High QualifiedQCS C-T-00016, I1
Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High Qualified
QCS C-T-00017, I1
QCS C-T-00018, I1
Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany ASTM F1110 Sandwich corrosion test Low QualifiedX2528PTSF11004 Issue 2 Textile Floor Covering (Carpet) Frame
Specification, chapter 2.3.3
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany EN 986 Textile Floor Coverings - Tiles - Determination of dimmensional changes due to the effect of a varied water and heat conditions and distortion out of plane. Low Qualified
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany ISO 1765 Machine made textile floor coverings - determination of thickness Low Qualified
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany ISO 4578 Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method Low Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany ISO 8543 Textile floor coverings - Methods for determination of mass Low Qualified
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany ISO 9352 Plastics - Determination of resistance to wear by abrasive wheels Low Qualified Test Method eligible for external (supplier) request.
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany Z_Other Other test - Specify in Remark QualifiedX2528PTSF11004 iss 2 Textile Floor Covering (Carpet) Frame
Specification
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany Z_Other Other test - Specify in Remark QualifiedElectrostatic Discharge iaw X2528PTSF11004 Issue 2 Textile Floor
Covering (Carpet) Frame Specification, chapter 2.3.4
135837.1 Airbus Operations GmbH (Fire Test Lab) Bremen Germany Z_Other Other test - Specify in Remark Qualified Penetration Test acc. to AIMS04-18-000, chap. 4.2.2.8.3.
304742 ALS CZECH REPUBLIC, S.R.O. Ceská Lípa Czech Republic AITM 1-0024 Determination of the completeness of cure of organic coatings Low Qualified
304742 ALS CZECH REPUBLIC, S.R.O. Ceská Lípa Czech Republic AITM 3-0029 Determination of iron (III) as reactive compound in acidic surface treatment baths Low Qualified
304742 ALS CZECH REPUBLIC, S.R.O. Ceská Lípa Czech Republic AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified Waiting deviation form answer from engineering
304742 ALS CZECH REPUBLIC, S.R.O. Ceská Lípa Czech Republic AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified
304742 ALS CZECH REPUBLIC, S.R.O. Ceská Lípa Czech Republic AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
304742 ALS CZECH REPUBLIC, S.R.O. Ceská Lípa Czech Republic AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Qualified
304742 ALS CZECH REPUBLIC, S.R.O. Ceská Lípa Czech Republic AITM 3-0038 Determination of non-volatile-residue Low Qualified
304742 ALS CZECH REPUBLIC, S.R.O. Ceská Lípa Czech Republic ISO 10304-1Water quality - Determination of dissolved anions by liquid chromatography of ions - Part 1: Determination of bromide, chloride, fluoride, nitrate, nitrite, phosphate and
sulfateLow Qualified
303102 AMPP SERVICES LTD ELY United Kingdom AITM 4-0002 Microstructural characterization of welded aluminium structures Low Qualified Aluminium welds
303102 AMPP SERVICES LTD ELY United Kingdom ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified Austenitic stainless steel
303102 AMPP SERVICES LTD ELY United Kingdom ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified Steel bars and billets
303102 AMPP SERVICES LTD ELY United Kingdom ASTM E112 Determining average grain size Low Authorised to proceed Dec-18 All
303102 AMPP SERVICES LTD ELY United Kingdom ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified All
303102 AMPP SERVICES LTD ELY United Kingdom ASTM E340 Macroetching metals and alloys Low Qualified All
303102 AMPP SERVICES LTD ELY United Kingdom ASTM E407 Microetching metals and alloys Low Qualified All
303102 AMPP SERVICES LTD ELY United Kingdom EN 10247 Micrographic examination of the non-metallic inclusion content of steels using standard pictures Low Qualified All
303102 AMPP SERVICES LTD ELY United Kingdom EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Authorised to proceed Dec-18Titanium
Method A only
303102 AMPP SERVICES LTD ELY United Kingdom EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified All
Page 2 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
303102 AMPP SERVICES LTD ELY United Kingdom EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified All
303102 AMPP SERVICES LTD ELY United Kingdom ISO 17639 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds Low Qualified
303102 AMPP SERVICES LTD ELY United Kingdom QVA-Z10-53-00 Metallographic test - Macroscopic examination - General information Low Qualified All
303102 AMPP SERVICES LTD ELY United Kingdom Z_Opt. metallo. Optical metallography QualifiedAll materials
Weld examinations as per ABP Specifications and BS ISO 24394
298894 ANACHEM LABORATORIES El Segundo USA AITM 1-0024 Determination of the completeness of cure of organic coatings Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA AITM 3-0029 Determination of iron (III) as reactive compound in acidic surface treatment baths Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM B487 Measurement of metal and oxide coating thicknesses by microscopical examination of a cross-section Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM D1125 Standard Test Methods for Electrical Conductivity and Resistivity of Water Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM D2240 Rubber property - Durometer hardness Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM D3359 Measuring adhesion by tape test Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM E1135 Standard Test method for Comparing the Brightness of fluorescent Penetrants Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM E384 Microindentation hardness of materials Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ASTM G85 Modified salt spray (fog) testing Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 1518 Paints and varnishes - Scratch test Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 2178 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 2812-1 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 3696 Water for analytical laboratory use - Specification and test methods Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 4287 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 4288 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture Low Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 4628-1Paints and varnishes - Evaluation of degradation of coatings; Designation of quantity and size of defects, and of intensity of uniform changes in appearance
- Part 1: General introduction and designation systemLow Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2:
Assessment of degree of blisteringLow Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 4628-4Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4:
Assessment of degree of crackingLow Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 4628-5Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 5:
Assessment of degree of flakingLow Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 4628-6Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 6:
Assessment of degree of chalking by tape methodLow Qualified
298894 ANACHEM LABORATORIES El Segundo USA ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
301431 APAVE Saint-Ouen France AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Disqualified al/cu/zn/ti sur bain de traitement de surface
301431 APAVE Saint-Ouen France AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Disqualified Chlorures sur bain de traitement de surface
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China AITM 1-0003 Determination of the glass transition temperatures (DMA) High Authorised to proceed Mar-18 QCS Pending
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS151206
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ASTM D638 Tensile properties of plastics Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ASTM D790 Flexural properties of unreinforced and reinforced plastics and electrical insulating materials Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ASTM E112 Determining average grain size Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ASTM E340 Macroetching metals and alloys Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ASTM E407 Microetching metals and alloys Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ASTM E8 Tension testing of metallic materials Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China ISO 6892Metallic materials - Tensile testing - Part 1: Method of test at room temperature / Part 2: Method of test at elevated temperature / Part 3: Method of test at low
temperatureLow Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China Z_Comp. spec. prod. Composite specimen production Qualified
311578 APPLUS (SHANGHAI) QUALITY INSPECTION CO., LTD PUDONG DISTRICT, SHANGHAI China Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0008-A3 Fiber reinforced plastics - Determination of plain compression strength (loads < 500 kN) High Qualified QCS130469
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Qualified QCS141174
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS 131074
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0042 (ASTM E647) Determination of fatigue crack growth rates for aluminium clad sheet and clad plate up to 12 mm in constant-load-amplitude tests - K-increasing method High Qualified*Restricted to test only CT specimens.
QCS150083
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0047 Determination of apparent interlaminar shear strength of fibre metal laminates (Glare materials) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0050-A / B Test method for the determination of blunt notch open and filled hole tensile strength of fibre metal laminates (Glare materials) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0058 Mobile hardness testing Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0059 In-plane-shear test on fibre metal laminates (Glare material) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0064 Butt welding of aluminium alloys - Bend test Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0065 Fiber reinforced plastics - Determination of joint strength of mechanically fastened joints High Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0066 Fibre reinforced plastics – Determination of pull-out / pull-through strength on riveted joints Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 1-0067 Determination of tension through the hole strength on fastened joints Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 4-0002 Microstructural characterization of welded aluminium structures Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM B769 Shear testing of aluminium alloys Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM C273 Shear properties of sandwich core materials Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM C365 Flatwise compressive properties of sandwich cores Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E111 Young’s modulus, tangent modulus, and chord modulus High Authorised to proceed Dec-18 Pending QCS
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E112 Determining average grain size Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E340 Macroetching metals and alloys Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E384 Microindentation hardness of materials Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Authorised to proceed Jun-18 Pending QCS
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E407 Microetching metals and alloys Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E407 Microetching metals and alloys Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E45 Determining the inclusion content of steel Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E647 Measurement of fatigue crack growth rates (da/dn) High Qualified*Restricted to test only CT specimens.
QCS150083
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM E9 Compression testing of metallic materials at room temperature Low Qualified
Page 3 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM G112 Standard guide for conducting exfoliation corrosion tests in aluminium alloys Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM G66 Visual assessment of exfoliation corrosion susceptibility of 5XXX series aluminium alloys (ASSET test) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM G67 Determining the susceptibility to intergranular corrosion of 5XXX series aluminium alloys by mass loss after exposure to nitric acid (NAMLT test) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ASTM G85 Modified salt spray (fog) testing Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2002-2 Tensile testing at elevated temperature Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2002-6 Metallic materials: Bend testing Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2378 Fibre reinforced plastics - Determination of water absorption by immersion Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Qualified Also according to Legacy standard I+D-E-352
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 2831 Hydrogen embrittlement of steel - Test by slow bending Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 6018 Determination of density according to displacement method Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain EN 6072 Constant amplitude fatigue testing (HCF) High Authorised to proceed Dec-18 QCS Pending
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 1172 Textiles - Glass reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination method Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 2178 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 3651-1 Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in
media containing sulfuric acidLow Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 3887 Steels - Determination of depth of decarburization Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 4624 Paints and varnishes - Pull-off test for adhesion Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 6270-1 Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-05 Fastener test methods - Method 5: Stress durability Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-09 Fastener test methods - Method 9: Stress corrosion Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-10 Fastener test methods - Method 10: Stress rupture Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-14 Fastener test methods - Method 14: Stress durability (internally threaded fasteners) Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-17 Fastener test methods - Method 17: Stress relaxation Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-18 Fastener test methods - Method 18: Elevated temperature tensile strength Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-20 Fastener test methods - Method 20: Single shear Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-23 Fastener test methods - Method 23: Tensile strength of panel fasteners Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-26 Fastener test methods - Method 26: Structural panel fastener lap joint shear Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain NASM 1312-28 Fastener test methods - Method 28: Elevated temperature double shear Low Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain TT2 Component & Large Sub-component Test Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain TT4 Bespoke Test Bench Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain TT7 Standard Test Bench > 5 MN Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain TT8 Standard Test Bench <= 5 MN Qualified
286347 APPLUS BARCELONA (LGAI) BELLATERRA Spain Z_Duqueine window A350 FPQ Mechanical Tests for Duqueine Window Frames on A350 XWB Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain AIPS/AIPI 03-02-019 Manufacture of monolithic parts with thermoset prepreg materials High Authorised to proceed Dec-18
LIMITED TO TEST SPECIMEN MANUFACTURING.
Authorisation to proceed based on technical assessment.
ME1325431 granted by Nicolas LARROSE.
Pending participation in qualification campaign.
306790 APPLUS ILLESCAS ILLESCAS Spain AIPS/AIPI 06-01-004 Mechanical surface preparation of non-structural adherend prior to adhesive bonding Low Authorised to proceed Dec-18
LIMITED TO TEST SPECIMEN MANUFACTURING.
Authorisation to proceed based on technical assessment.
M1325431 granted by Nicolas LARROSE.
Pending participation in qualification campaign.
306790 APPLUS ILLESCAS ILLESCAS Spain AIPS/AIPI 06-02-002 Non-structural adhesive bonding Low Authorised to proceed Dec-18
LIMITED TO TEST SPECIMEN MANUFACTURING.
Authorisation to proceed based on technical assessment.
M1325431 granted by Nicolas LARROSE.
Pending participation in qualification campaign.
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 131027
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS 120305
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS126574 (A1)
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS126563 (A2), for use of HCCF ONLY
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High QualifiedQCS151573 (A) restricted to i. Determination of plain modulus ONLY and
ii. Use of hydraulic grips. Determination of plain strength is not allowed.
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS 120321 / Polymers, plastics
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
306790 APPLUS ILLESCAS ILLESCAS Spain AITM 3-0027 Determination of the melting behaviour and the extent of cristallinity of semi-cristalline materials by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified Also according to QVA-Z10 46 05 and I+D-E-130
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2329 Textile glass fibre preimpregnates - Test method for the determination of mass per unit area Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2330 Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2331 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2332 Textile glass fibre preimpregnates - Test method for the determination of the resin flow Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified Also according to I+D-E 031
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
Page 4 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
306790 APPLUS ILLESCAS ILLESCAS Spain EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain EN 542 Adhesives - Determination of density Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain ISO 604 Plastics - Determination of compressive properties Low Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
306790 APPLUS ILLESCAS ILLESCAS Spain Z_Comp. spec. prod. Composite specimen production Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0001 Fiber reinforced plastics - Determination of mechanical degradation due to chemical paint strippers Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS170021
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High QualifiedQCS 090554
Also according to ASTM D5528
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0006 (EN 6034) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode II - GIIc High Qualified QCS 090555
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High QualifiedQCS110519_iss02
Limited up to 250 kN
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Qualified QCS 090547
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS 131072
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0048 Compression test method of fibre metal laminates (Glare materials) Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0049 Tensile test method of fibre metal laminates (Glare materials) Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0050-A / B Test method for the determination of blunt notch open and filled hole tensile strength of fibre metal laminates (Glare materials) Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0051 Fibre metal laminates (Glare material) - Determination of bearing strength High Qualified Covered by QCS 090547 and QCS 090556
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS 090554 / Including Load Introduction using Blocks
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0060 T-Type tensile tests on welded joints High Qualified QCS ST-120
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0065 Fiber reinforced plastics - Determination of joint strength of mechanically fastened joints High Qualified QCS pending
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0066 Fibre reinforced plastics – Determination of pull-out / pull-through strength on riveted joints Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0067 Determination of tension through the hole strength on fastened joints Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 1-0069 Fibre reinforced plastics - Determination of curved-beam failure load High Qualified QCS 150836
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Qualified QCS170022
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Qualified QCS170023
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 3-0027 Determination of the melting behaviour and the extent of cristallinity of semi-cristalline materials by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Missing
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 4-0002 Microstructural characterization of welded aluminium structures Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 4-0003 Test method for determining the pore content of fibre reinforced plastics using automatic image analysis High Qualified QCS 090257
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM E112 Determining average grain size Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM E238 Pin-type bearing test of metallic materials High Qualified QCS 090556
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM E340 Macroetching metals and alloys Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM E384 Microindentation hardness of materials Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM E407 Microetching metals and alloys Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM E9 Compression testing of metallic materials at room temperature Low Qualified QSC 090556
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified Also according to QVA-Z10-46-03
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2378 Fibre reinforced plastics - Determination of water absorption by immersion Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified Also according to QVA-Z10-46-12
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2823 (prEN) Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2850-A (Pren) (ISO 14126-1) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method A High Qualified QCS 126629
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified Also according to EN 3114-1
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified Also according to EN 3114-1
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany EN 6072 Constant amplitude fatigue testing (HCF) High Qualified QCS 090560
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 178 Plastics – Determination of flexural properties Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 4578 Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 4587 Adhesive - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 527-4 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fiber reinforced plastic composites Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 604 Plastics - Determination of compressive properties Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany NASM 1312-06 Fastener test methods - Method 6: Hardness Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany NASM 1312-18 Fastener test methods - Method 18: Elevated temperature tensile strength Low Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany Z_Opt. metallo. Optical metallography Qualified
143041 APPLUS+ BKWerkstofftechnik GMBH BREMEN Germany Z_Spectro. OES Spectrometry: optical emission (OES) Qualified
311314ATI SPECIALTY ALLOYS COMPONENTS MILLERSBURG
OPERATIONSALBANY USA AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
311314ATI SPECIALTY ALLOYS COMPONENTS MILLERSBURG
OPERATIONSALBANY USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified Ti
311314ATI SPECIALTY ALLOYS COMPONENTS MILLERSBURG
OPERATIONSALBANY USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified Ti
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA AITM 3-0007 Drop (reaction) test on aluminium and aluminium alloys Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA AITM 3-0029 Determination of iron (III) as reactive compound in acidic surface treatment baths Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA AMS 2315 Determination of delta ferrite content Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM B769 Shear testing of aluminium alloys Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E112 Determining average grain size Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E34 Chemical analysis of aluminum and aluminum-base alloys Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E340 Macroetching metals and alloys Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E384 Microindentation hardness of materials Low Qualified
Page 5 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E407 Microetching metals and alloys Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E8 Tension testing of metallic materials Low Authorised to proceed Dec-18 Without Young's Modulus determination
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM E9 Compression testing of metallic materials at room temperature Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM F519 Mechanical hydrogen embrittlement evaluation of plating/coating processes and service environments Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM G112 Standard guide for conducting exfoliation corrosion tests in aluminium alloys Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM G66 Visual assessment of exfoliation corrosion susceptibility of 5XXX series aluminium alloys (ASSET test) Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ASTM G67 Determining the susceptibility to intergranular corrosion of 5XXX series aluminium alloys by mass loss after exposure to nitric acid (NAMLT test) Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Authorised to proceed Dec-18
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA EN 2002-6 Metallic materials: Bend testing Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA EN 2832 Hydrogen embrittlement of steel - Notched specimen test Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ISO 6507 (ASTM E92) Vickers hardness test Low Authorised to proceed Dec-18 Micro-vickers hardness only
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified HRB and HRC
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NAS 1675 § 4.6.7 Fastener test methods - § 4.6.7: Vibration endurance Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-01 Fastener test methods - Method 1: Salt Spray Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-03 Fastener test methods - Method 3: Humidity Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-05 Fastener test methods - Method 5: Stress durability Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-06 Fastener test methods - Method 6: Hardness Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-07 Fastener test methods - Method 7: Vibration Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-09 Fastener test methods - Method 9: Stress corrosion Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-10 Fastener test methods - Method 10: Stress rupture Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-12 Fastener test methods - Method 12: Thickness of metallic coatings Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-14 Fastener test methods - Method 14: Stress durability (internally threaded fasteners) Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-15 Fastener test methods - Method 15: Torque - Tension Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-20 Fastener test methods - Method 20: Single shear Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-22 Fastener test methods - Method 22: Receptacle push-out – Panel fasteners Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-23 Fastener test methods - Method 23: Tensile strength of panel fasteners Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-24 Fastener test methods - Method 24: Receptacle torque-out – Panel fasteners Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-25 Fastener test methods - Method 25: Driving recess torque quality conformance test Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-27 Fastener test methods - Method 27: Panel fastener sheet pull-up Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-30 Fastener test methods - Method 30: Sheet pull-up of blind fasteners Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA NASM 1312-31 Fastener test methods - Method 31: Torque Low Qualified
307768 ATLAS TESTING LABORATORIES Rancho Cucamonga USA Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_comb. Clim and mech. Combined climatic and mechanic testing Qualified
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Modal analysis Modal analysis Qualified
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Operational Shocks and Crash Safety
RTCA - DO-160_Section 7.2.1
Operational Shocks
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Operational Shocks and Crash Safety
RTCA - DO-160_Section 7.2.2
Operation Shocks Alternate Test Procedure
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Operational Shocks and Crash Safety
RTCA - DO-160_Section 7.3.1
Crash Safety Test Procedure 1 (Impulse)
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Operational Shocks and Crash Safety
RTCA - DO-160_Section 7.3.2
Crash Safety Alternate Test Procedure (Impulse)
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Operational Shocks and Crash Safety
RTCA - DO-160_Section 7.3.3
Crash Safety Test Procedure 2 (Sustained)
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Vibration
RTCA - DO-160_Section 8.5.1
Standard Vibration Test Procedure-Fixed Wing Aircraft- Sinusoidal
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Vibration
RTCA - DO-160_Section 8.5.2
Standard Vibration Test Procedure-Fixed Wing Aircraft- Random
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Vibration
RTCA - DO-160_Section 8.6
High-Level, Short Duration Vibration Test Procedure
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Vibration
RTCA - DO-160_Section 8.7.1
Robust Vibration Test Procedure-Fixed-Wing Aircraft - Sinusoidal
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Vibration
RTCA - DO-160_Section 8.7.2
Robust Vibration Test Procedure-Fixed-Wing Aircraft - Random
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Vibration
"(Program Specific Technical Notes)
A350: V00RP0730936, V71RP0832860 and TN524.5071-05"
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark QualifiedHumidity - DO160
Plastics / Metall alloys
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark QualifiedTemperature Variation - DO160
Plastics / Metall alloys
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark QualifiedOperational Low / High Temperature - DO160
Plastics / Metall alloys
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark QualifiedLow/High Survival Temp - DO160
Plastics / Metall alloys
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark Qualified
Waterproofness - DO160
Plastics / Metall alloys
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark QualifiedFluid Susceptibility - DO160
Plastics / Metall alloys
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark QualifiedSalt Fog - DO160
Plastics / Metall alloys
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Other Other test - Specify in Remark QualifiedIcing - DO160
Plastics / Metall alloys
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Random vibrations Random vibrations test Qualified Several metals and plastics
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Shock Shock test Qualified Several metals and plastics
142398 BERTRANDT INGENIEURBUERO GMBH Germany Z_Sine vibrations Sine vibrations test Qualified Several metals and plastics
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E112 Determining average grain size Low Qualified Ti Alloy / Stainless Steels / Aluminium
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified Ti Alloy
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified Ti Alloy
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Qualified Ti Alloy
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified Ti Alloy
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified Ti Alloy / Stainless Steels / Aluminium
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E384 Microindentation hardness of materials Low Qualified Ti Alloy / Aluminium
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E407 Microetching metals and alloys Low Qualified Ti Alloy / Stainless Steels / Aluminium
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ASTM E8 Tension testing of metallic materials Low Qualified Ti Alloy / Aluminium
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified Ti Alloy / Aluminium
305901 BIAM - AVIC Beijing Institute of Aeronautical Materials Beijing China ISO 6506 (ASTM E10) Brinell hardness test Low Qualified According to ASTM E10 only
300082 BISS - Bangalore Integrated System Solutions Pvt. Ltd. Bangalore India AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Disqualified
300082 BISS - Bangalore Integrated System Solutions Pvt. Ltd. Bangalore India AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Disqualified
300082 BISS - Bangalore Integrated System Solutions Pvt. Ltd. Bangalore India AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Disqualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France ASTM E112 Determining average grain size Low Qualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France ASTM E340 Macroetching metals and alloys Low Qualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France ASTM E384 Microindentation hardness of materials Low Qualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France ASTM E407 Microetching metals and alloys Low Qualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France ASTM E45 Determining the inclusion content of steel Low Qualified
Page 6 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified Method B
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
290825 BUREAU VERITAS LABORATOIRE (PESSAC) PESSAC France Z_Failure analysis Failure Analysis - Coordination & Reporting Qualified Restricted to Assystem trained FA investigators
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ASTM E340 Macroetching metals and alloys Low Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ASTM E384 Microindentation hardness of materials Low Authorised to proceed Dec-18
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ASTM E407 Microetching metals and alloys Low Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France EN 2002-2 Tensile testing at elevated temperature Low Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ISO 6506 (ASTM E10) Brinell hardness test Low Authorised to proceed Dec-18
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified HRC only
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France ISO 6892Metallic materials - Tensile testing - Part 1: Method of test at room temperature / Part 2: Method of test at elevated temperature / Part 3: Method of test at low
temperatureLow Qualified Part 1 and 2
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France QVA-Z10-61-00 Determination of particle sizes Qualified
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France Z_mechanical tests Various mechanical tests Qualified Alternating traction DMC 45
276094 BUREAU VERITAS LABORATOIRES (BELFORT) BELFORT France Z_Opt. metallo. Optical metallography Qualified NFA 05-150
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E1086 Analysis of austenitic stainless steel by spark atomic emission spectrometry Low Authorised to proceed Dec-18
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E112 Determining average grain size Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E1251 Analysis of aluminum and aluminum alloys by Atomic Emission Spectrometry Low Authorised to proceed Dec-18
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Authorised to proceed Dec-18
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E290 Bend testing of material for ductility Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E34 Chemical analysis of aluminum and aluminum-base alloys Low Authorised to proceed Dec-18
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E340 Macroetching metals and alloys Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E384 Microindentation hardness of materials Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E407 Microetching metals and alloys Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E415 Analysis of carbon and low-alloy steel by spark atomic emission spectrometry Low Authorised to proceed Dec-18
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ASTM E45 Determining the inclusion content of steel Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France EN 2002-2 Tensile testing at elevated temperature Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France EN 2003-10 Titanium and titanium alloys - Part 10: Sampling for determination of hydrogen content Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Authorised to proceed Dec-18 Restricted to method A
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France EN 3976 Titanium and titanium alloys - Chemical analysis for the determination of hydrogen content Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Authorised to proceed Dec-18
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 17639 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 26845Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic
emission spectrometry (ICP-AES) methodsAuthorised to proceed Dec-18
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid
medium by measurement of loss in mass (Huey test)Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 3887 Steels - Determination of depth of decarburization Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 5173 Destructive tests on welds in metallic materials - Bend tests Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 6892Metallic materials - Tensile testing - Part 1: Method of test at room temperature / Part 2: Method of test at elevated temperature / Part 3: Method of test at low
temperatureLow Qualified Part 1 and Part 2
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
147145 BUREAU VERITAS LABORATOIRES (ST OUEN) SAINT-OUEN L'AUMÔNE France Z_Combustion Analysis by combustion Qualified
A 06-322 : Analyse chimique des aciers et fontes -Généralités sur le
dosage du carbone après combustion
NF EN ISO 9556 (Aciers et fontes - Dosage du carbone total - Méthode
par absorption dans l'infrarouge après combustion dans un four à
induction)
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 1-0022 Wettability test Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 1-0024 Determination of the completeness of cure of organic coatings Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 1-0032 Determination of non hardening characteristic of sealant Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 1-0033 Sealants: Determination of the curing rate of sealing materials Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 1-0036 Sealants - Determination of assembly time Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 1-0054 Determination of orange peel Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 1-0070 Surface roughness measurements using surface stylus methods Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 2-0027 Determination of colour differences Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 2-0031 Determination of electrical resistivity by ohmic method Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 2-0033 Sealants - Determination of slump Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 2-0034 Sealants - Determination of tack-free time of sealing materials Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 2-0055 NSA 307 110 - Hydraulic fluid monitoring prior to aircraft delivery Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0007 Drop (reaction) test on aluminium and aluminium alloys Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0015 Determination of phosphoric acid content Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0029 Determination of iron (III) as reactive compound in acidic surface treatment baths Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0037 Determination of phosphoric and sulphuric acid in anodizing electrolytes Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 3-0038 Determination of non-volatile-residue Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 7-0003 Sealants - Determination of application time of sealing materials Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 7-0008 Microbiological monitoring of TSA anodisation baths bait substrates Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 7-0009 Detection of fungal contamination in TSA anodisation baths vitality test Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain AITM 7-0010 Determination of microbiological contamination in aviation fuel Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM B487 Measurement of metal and oxide coating thicknesses by microscopical examination of a cross-section Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM D1125 Standard Test Methods for Electrical Conductivity and Resistivity of Water Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM D2240 Rubber property - Durometer hardness Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM D3359 Measuring adhesion by tape test Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM D445 Kinematic viscosity of transparent and opaque liquids (and calculation of dynamic viscosity) Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM D512 Chloride ion in water Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM D523 Specular gloss Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM D86 Distillation of petroleum products at atmospheric pressure Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM E340 Macroetching metals and alloys Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM E384 Microindentation hardness of materials Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM E407 Microetching metals and alloys Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM F519 Mechanical hydrogen embrittlement evaluation of plating/coating processes and service environments Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain EN 2832 Hydrogen embrittlement of steel - Notched specimen test Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 1518 Paints and varnishes - Scratch test Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2106 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2143 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2431 Paints and varnishes - Determination of flow time by use of flow cups Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified
Page 7 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2811-1 Paints and varnishes - Determination of density - Part 1: Pyknometer method Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2813 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 2819 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 3251 Paints, varnishes and plastics - Determination of non-volatile-matter content Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid
medium by measurement of loss in mass (Huey test)Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 3675 Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 3696 Water for analytical laboratory use - Specification and test methods Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 3887 Steels - Determination of depth of decarburization Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 6507 (ASTM E92) Vickers hardness test Low QualifiedAccording to ISO 6507-1, restricted to 0.01<load range<0.2 and 0.2<low
force<0.5
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 758 Liquid chemical products for industrial use - Determination of density at 20 °C Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 760 Determination of water - Karl Fischer method (General method) Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 7619-1 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain ISO 9514 Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain QVA-Z09-19-01 Determination of the pH-value in Aqueous Media Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain QVA-Z09-20-00 Determination of Water Hardness Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain QVA-Z09-22-00 Determination of Dry Residue Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain QVA-Z09-23-00 Determination of the Specific Conductivity in Aqueous Media Low Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain QVA-Z10-61-00 Determination of particle sizes Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain Z_Opt. metallo. Optical metallography Qualified
292690 CANAGROSA LAB & SERVICES S.L. LA RINCONADA, Sevilla Spain Z_Other Other test - Specify in Remark Qualified According to QVA-Z10-73-00
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low QualifiedAircraft interior materials
Approved Test Chamber ID: HVF001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low QualifiedAircraft interior materials
Approved Test Chamber ID: HVF001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low QualifiedAircraft interior materials
Approved Test Chamber ID: HVF001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low QualifiedAircraft interior materials
Approved Test Chamber ID: HVF001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High Qualified
QCS: 150920
Aircraft interior materials
Approved Test Chamber ID: OSU001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Qualified
QCS: 150976
Aircraft interior materials
Approved Test Chamber ID: NBS001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 2-0009 Fire resistance of aircraft seat cushion utilizing a high density open flame High Authorised to proceed Dec-18
Seat cushions
QCS Pending
Approved Test Chamber ID: BUR001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 2-0053 Determination of flammability and flame propagation of thermal / acoustic insulation materials - Radiant panel test High Authorised to proceed Dec-18
Thermo/acoustic insulation materials
QCS Pending
Approved Test Chamber ID: INF001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High Qualified
QCS151489
Aircraft interior m
Approved Test Chamber ID: NBS001
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain TT2 Component & Large Sub-component Test Qualified
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain TT4 Bespoke Test Bench Qualified
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain TT6 High Frequency Test Qualified
261957 CENTRO DE TECNOLOGIAS AERONAUTICAS CTA Minano-Alava Spain TT8 Standard Test Bench <= 5 MN Qualified
305773 CETIM MAROC CASABLANCA Morocco ASTM E112 Determining average grain size Low Qualified
305773 CETIM MAROC CASABLANCA Morocco ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
305773 CETIM MAROC CASABLANCA Morocco ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
305773 CETIM MAROC CASABLANCA Morocco ASTM E407 Microetching metals and alloys Low Qualified
305773 CETIM MAROC CASABLANCA Morocco ASTM E8 Tension testing of metallic materials Low Qualified
305773 CETIM MAROC CASABLANCA Morocco EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
305773 CETIM MAROC CASABLANCA Morocco EN 2002-2 Tensile testing at elevated temperature Low Qualified
305773 CETIM MAROC CASABLANCA Morocco EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Authorised to proceed Dec-18
305773 CETIM MAROC CASABLANCA Morocco EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Authorised to proceed Dec-18
305773 CETIM MAROC CASABLANCA Morocco EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Authorised to proceed Dec-18
305773 CETIM MAROC CASABLANCA Morocco EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
305773 CETIM MAROC CASABLANCA Morocco EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified regarding NF06650
305773 CETIM MAROC CASABLANCA Morocco EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified
305773 CETIM MAROC CASABLANCA Morocco EN 3976 Titanium and titanium alloys - Chemical analysis for the determination of hydrogen content Low Qualified
305773 CETIM MAROC CASABLANCA Morocco ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
305773 CETIM MAROC CASABLANCA Morocco Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
259686 CETIM NANTES NANTES France AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified Also according to IGC 04-26-260, IGC 04-26-250 and IGC 04-26-252
259686 CETIM NANTES NANTES France AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
259686 CETIM NANTES NANTES France AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS140511
259686 CETIM NANTES NANTES France AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Authorised to proceed Dec-18
259686 CETIM NANTES NANTES France AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
259686 CETIM NANTES NANTES France AITM 1-0024 Determination of the completeness of cure of organic coatings Low Qualified
259686 CETIM NANTES NANTES France AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Authorised to proceed Dec-18
259686 CETIM NANTES NANTES France AITM 3-0003 (EN 6042) Analysis of organic compounds by infrared spectroscopy (IR) Low Qualified
259686 CETIM NANTES NANTES France AITM 3-0004 (EN 6043) Determination of gel time and viscosity Low Qualified
259686 CETIM NANTES NANTES France ASTM C272 Water absorption of core materials for structural sandwich constructions Low Qualified
259686 CETIM NANTES NANTES France ASTM C273 Shear properties of sandwich core materials Low Qualified
259686 CETIM NANTES NANTES France ASTM C365 Flatwise compressive properties of sandwich cores Low Qualified
259686 CETIM NANTES NANTES France ASTM E2602 Assignment of the glass transition temperature by modulated temperature differential scanning calorimetry (DSC) High Authorised to proceed Dec-18
259686 CETIM NANTES NANTES France ASTM E831 Linear thermal expansion of solid materials by thermomechanical analysis (TMA) Low Qualified
259686 CETIM NANTES NANTES France EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
259686 CETIM NANTES NANTES France EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
259686 CETIM NANTES NANTES France EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
259686 CETIM NANTES NANTES France EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
259686 CETIM NANTES NANTES France EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
259686 CETIM NANTES NANTES France EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
259686 CETIM NANTES NANTES France EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Authorised to proceed Dec-18
259686 CETIM NANTES NANTES France EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Authorised to proceed Dec-18
259686 CETIM NANTES NANTES France EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
259686 CETIM NANTES NANTES France EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Authorised to proceed Dec-18
259686 CETIM NANTES NANTES France EN 2823 (prEN) Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics Low Qualified
259686 CETIM NANTES NANTES France EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
259686 CETIM NANTES NANTES France EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
259686 CETIM NANTES NANTES France EN 3665 Paints and varnishes - Filiform corrosion resistance test on aluminium alloys Low Qualified
259686 CETIM NANTES NANTES France ISO / TR 7620 Rubber materials - Chemical resistance Low Qualified
259686 CETIM NANTES NANTES France ISO 11358 Plastics - Thermogravimetry (TG) of polymers Low Qualified
259686 CETIM NANTES NANTES France ISO 1172 Textiles - Glass reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination method Low Qualified
259686 CETIM NANTES NANTES France ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
259686 CETIM NANTES NANTES France ISO 1518 Paints and varnishes - Scratch test Low Qualified
259686 CETIM NANTES NANTES France ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified
259686 CETIM NANTES NANTES France ISO 16474 Paints and varnishes - Methods of exposure to laboratory light sources Low Qualified
259686 CETIM NANTES NANTES France ISO 179-1 Plastics – Determination of Charpy impact properties – Part 1: Non-instrument impact test Low Qualified
259686 CETIM NANTES NANTES France ISO 180 Plastics - Determination of Izod impact strength Low Qualified
259686 CETIM NANTES NANTES France ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
259686 CETIM NANTES NANTES France ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified Eddy-current and Magnetic-induction methods only
259686 CETIM NANTES NANTES France ISO 2812-1 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water Low Qualified
259686 CETIM NANTES NANTES France ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
259686 CETIM NANTES NANTES France ISO 2813 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° Low Qualified
Page 8 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
259686 CETIM NANTES NANTES France ISO 4624 Paints and varnishes - Pull-off test for adhesion Low Qualified
259686 CETIM NANTES NANTES France ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2:
Assessment of degree of blisteringLow Qualified
259686 CETIM NANTES NANTES France ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
259686 CETIM NANTES NANTES France ISO 604 Plastics - Determination of compressive properties Low Qualified
259686 CETIM NANTES NANTES France ISO 6270-1 Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation Low Qualified
259686 CETIM NANTES NANTES France ISO 6272-1 Paints and varnishes - Rapid-deformation (impact resistance) tests Part 1: Falling-weight test, large-area indenter Low Qualified
259686 CETIM NANTES NANTES France ISO 6272-2 Paints and varnishes - Rapid-deformation (impact resistance) tests Part 2: Falling-weight test, small-area indenter Low Qualified
259686 CETIM NANTES NANTES France ISO 844 Rigid cellular plastics - Determination of compression properties Low Qualified
259686 CETIM NANTES NANTES France ISO 845 Cellular plastics and rubbers - Determination of apparent density Low Qualified
259686 CETIM NANTES NANTES France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Authorised to proceed Dec-18 Only on paints
259686 CETIM NANTES NANTES France Z_Other Other test - Specify in Remark Qualified According to ISO1926
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Authorised to proceed Dec-18
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Authorised to proceed Dec-18
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA AITM 1-0057 Impact resistance of laminate and sandwich Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM C271 Density of sandwich core materials Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM C273 Shear properties of sandwich core materials Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM C365 Flatwise compressive properties of sandwich cores Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM D2584 Ignition loss of cured reinforced resins Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM D2734 Void content of reinforced plastics Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM D790 Flexural properties of unreinforced and reinforced plastics and electrical insulating materials Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM E8 Tension testing of metallic materials Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ASTM G85 Modified salt spray (fog) testing Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2002-2 Tensile testing at elevated temperature Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2002-6 Metallic materials: Bend testing Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Disqualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Disqualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ISO 291 Plastics - Standard atmospheres for conditioning and testing Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ISO 5893 Rubber and plastics test equipment - Tensile, flexural and compression types (constant rate of traverse) - Specification Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ISO 7619-1 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ISO 844 Rigid cellular plastics - Determination of compression properties Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ISO 8510-2 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180° peel Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA ISO 868 (ASTM D 2240) Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA NASM 1312-01 Fastener test methods - Method 1: Salt Spray Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
310716 CINCINNATI TESTING LABORATORIES Cincinnati USA Z_mechanical tests Various mechanical tests QualifiedASTM D6641 - Compressive properties of polymer matrix composite
materials using a combined loading compression (CLC) test fixture
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Qualified QCS 141172
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2378 Fibre reinforced plastics - Determination of water absorption by immersion Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
224801 COMPOSITES TESTING LABORATORY LTD, UNIT 1 GALWAY Ireland Z_Comp. spec. prod. Composite specimen production Qualified
150147 CRITT MDTS CHARLEVILLE MEZIERES France AMS 2315 Determination of delta ferrite content Low Qualified Stainless steel
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified Only methods A and E
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified All metallic materials and painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E1019Standard Test Method for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion
TechniquesLow Authorised to proceed Dec-18 Carbon in Nickel-Titanium based alloys (Nitinol type)
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E112 Determining average grain size Low Qualified All metallic materials
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified Titanium alloys
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified Titanium alloys
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified All metallic materials
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E340 Macroetching metals and alloys Low Qualified All metallic materials
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E407 Microetching metals and alloys Low Qualified All metallic materials
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E45 Determining the inclusion content of steel Low Qualified Steel
150147 CRITT MDTS CHARLEVILLE MEZIERES France ASTM E8 Tension testing of metallic materials Low Qualified Steel, stainless steel, titanium alloys, cobalt alloys, aluminium alloys
150147 CRITT MDTS CHARLEVILLE MEZIERES France EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified Steel, stainless steel, titanium alloys, cobalt alloys, aluminium alloys
150147 CRITT MDTS CHARLEVILLE MEZIERES France EN 2002-2 Tensile testing at elevated temperature Low Qualified Steel, nickel and copper alloys
150147 CRITT MDTS CHARLEVILLE MEZIERES France EN 2003-10 Titanium and titanium alloys - Part 10: Sampling for determination of hydrogen content Low Qualified Titanium alloys
150147 CRITT MDTS CHARLEVILLE MEZIERES France EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low QualifiedTitanium alloys
Method A
150147 CRITT MDTS CHARLEVILLE MEZIERES France EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified Titanium alloys
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified Steel
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified Steel
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 1518 Paints and varnishes - Scratch test Low QualifiedRestricted to Part 2
Painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified Painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 2409 Paints and varnishes - Cross-cut test Low Authorised to proceed Dec-18 Painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified Painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Authorised to proceed Dec-18 Painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 2813 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° Low Qualified Painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in
media containing sulfuric acidLow Qualified Stainless steel
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 3887 Steels - Determination of depth of decarburization Low Qualified
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 6270-2 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres Low Qualified Painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified All metallic materials
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 6506 (ASTM E10) Brinell hardness test Low Qualified All metallic materials
Page 9 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 6507 (ASTM E92) Vickers hardness test Low QualifiedAll metallic materials
Macro and Micro-hardness
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified All metallic materials
150147 CRITT MDTS CHARLEVILLE MEZIERES France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified All metallic materials and painting
150147 CRITT MDTS CHARLEVILLE MEZIERES France Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
Steel, stainless steel, cobalt, aluminium, nickel, titanium alloys (internal
range)
Also according to ISO 377 - Steel and steel products — Location and
preparation of samples and test pieces for mechanical testing
150147 CRITT MDTS CHARLEVILLE MEZIERES France Z_Opt. metallo. Optical metallography Qualified
All materials and plasma coatings
Internal method (MO-MET-07-02) by colour threshold or customer's
specification
150147 CRITT MDTS CHARLEVILLE MEZIERES France Z_Physical tests Various physical tests Qualified
INEL X-rays diffractometer - Retained austenite: internal method (MO-
MIC-06) - Steel
IPSEN heat treatment furnace - Heat treatments of specimens according
to internal method (CO-TTH-21) and customer's specifications - Steels, Ti
150147 CRITT MDTS CHARLEVILLE MEZIERES France Z_Spectro Analysis by spectrometry (others) QualifiedX-ray fluorescence spectrometry (internal method MO-ANA-27)
Titanium, cobalt and nickel alloys
150147 CRITT MDTS CHARLEVILLE MEZIERES France Z_Spectro Analysis by spectrometry (others) QualifiedEmission spectrometry by spark (internal method MO-ANA-01)
Steel, aluminium, nickel and cobalt alloys
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 131010
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 1-0033 Sealants: Determination of the curing rate of sealing materials Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 1-0036 Sealants - Determination of assembly time Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 2-0034 Sealants - Determination of tack-free time of sealing materials Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0003 (EN 6042) Analysis of organic compounds by infrared spectroscopy (IR) Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0004 (EN 6043) Determination of gel time and viscosity Low Qualified Limited to method "C" of AITM Testing method
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0025 Determination of solid content Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0027 Determination of the melting behaviour and the extent of cristallinity of semi-cristalline materials by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0029 Determination of iron (III) as reactive compound in acidic surface treatment baths Low Qualified SMUT GO NC
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified TARTARIC ACID
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
-Restricted to Analysis of Metals in Galvanic Bathes by Flame Atomic
Absortion Spectrometry
-NCF-CTME-001 approved by Airbus Engineering (Oct 16th, 2012).
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified ALUMINETCH Nº 3
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified TURCO 4215 NC LT / TARTARIC ACID / SMUT GO NC
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Qualified SMUT GO NC
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 3-0038 Determination of non-volatile-residue Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain AITM 7-0003 Sealants - Determination of application time of sealing materials Low Qualified Methods A and B
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ASTM D2240 Rubber property - Durometer hardness Low Qualified Methods A and D
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ASTM D2556 Apparent viscosity of adhesives having shear-rate-dependent flow properties Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ASTM E2602 Assignment of the glass transition temperature by modulated temperature differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2329 Textile glass fibre preimpregnates - Test method for the determination of mass per unit area Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2330 Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2331 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2332 Textile glass fibre preimpregnates - Test method for the determination of the resin flow Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 11357-2 Plastics - Differential scanning calorimetry (DSC) -Part 2: Determination of glass transition Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 11357-3 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 11358 Plastics - Thermogravimetry (TG) of polymers Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 2143 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 2555 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 2781 Rubber, vulcanized or thermoplastic - Determination of density Low Qualified Method A
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 7619-1 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) Low Qualified Methods A and D
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 868 (ASTM D 2240) Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) Low Qualified Methods A and D
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
298897 CTME Fundación Centro Tecnológico de Miranda de Ebro Miranda de Ebro (Burgos) Spain Z_Spectro Analysis by spectrometry (others) QualifiedChemical analysis by flame atomic absorption spectrometry.
SMUT GO NC / TARTARIC ACID (Al-Zn-Cu)
150951 DARCHEM ENGINEERING LTD STOCKTON ON TEES United Kingdom ISO 2685 Aircraft – Environmental test procedure for airborne equipment – Resistance to fire in designated fire zones High Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High Qualified QCS 150923
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Qualified QCS150979
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Dec-18 Pending QCS
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France TT1 Major Test Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France TT2 Component & Large Sub-component Test Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France TT3 Multi-loading Panel Test Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France TT4 Bespoke Test Bench Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France TT5 High Energy Impact Test Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France TT6 High Frequency Test Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France TT7 Standard Test Bench > 5 MN Qualified
245366 DGA TECHNIQUES AERONAUTIQUES BALMA France TT8 Standard Test Bench <= 5 MN Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA AMS 2315 Determination of delta ferrite content Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E112 Determining average grain size Low Qualified Titanium
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E21 Standard test methods for elevated temperature tension tests of metallic materials Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E238 Pin-type bearing test of metallic materials High Authorised to proceed Dec-18
QCS 151197
Authorisation to proceed maintained until a more extensive technical
qualification process is completed (on-going).
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E2465 Analysis of Ni-base alloys by X-ray fluorescence spectrometry Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E340 Macroetching metals and alloys Low Qualified Titanium
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E384 Microindentation hardness of materials Low Qualified Aluminum
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Qualified"No QCS required. Grandfathering."
Test Method carried out on LEGACY PROGRAMS
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E407 Microetching metals and alloys Low Qualified Titanium
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E572 Analysis of stainless and alloy steels by X-ray fluorescence spectrometry Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM E9 Compression testing of metallic materials at room temperature Low Qualified Titanium
Page 10 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM G44 Standard practice for exposure of metals and alloys by alternate immersion in neutral 3.5 % sodium chloride solution High Qualified QCS 151183
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM G47 Determining susceptibility to stress-corrosion cracking of 2XXX and 7XXX aluminum alloy products High Qualified QCS 151183
276093 DICKSON TESTING COMPANY SOUTHGATE USA ASTM G49 Standard practice for preparation and use of direct tension stress-corrosion test specimens High Qualified QCS 151183
276093 DICKSON TESTING COMPANY SOUTHGATE USA EN 10276 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA EN 2002-2 Tensile testing at elevated temperature Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified Titanium
276093 DICKSON TESTING COMPANY SOUTHGATE USA EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified Titanium
276093 DICKSON TESTING COMPANY SOUTHGATE USA EN 3976 Titanium and titanium alloys - Chemical analysis for the determination of hydrogen content Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA EN 6072 Constant amplitude fatigue testing (HCF) High Qualified"No QCS required. Grandfathering."
Test Method carried out on LEGACY PROGRAMS
276093 DICKSON TESTING COMPANY SOUTHGATE USA EN 6072 (machining) Fatigue test specimen machining (NADCAP test code O) Qualified"No QCS required. Grandfathering."
Test Method carried out on LEGACY PROGRAMS
276093 DICKSON TESTING COMPANY SOUTHGATE USA ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified Titanium
276093 DICKSON TESTING COMPANY SOUTHGATE USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ISO 6507 (ASTM E92) Vickers hardness test Low Qualified Limited to microhardness
276093 DICKSON TESTING COMPANY SOUTHGATE USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ISO 671 Steel and cast iron - Determination of sulphur content - Combustion titrimetric method Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA Z_Combustion Analysis by combustion Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA Z_IGF Inert gas fusion Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA Z_Opt. metallo. Optical metallography Qualified
276093 DICKSON TESTING COMPANY SOUTHGATE USA Z_Spectro. OES Spectrometry: optical emission (OES) Qualified
276095 DIRATS LABORATORIES WESTFIELD USA AMS 2315 Determination of delta ferrite content Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM C633 Adhesion or cohesion strength of thermal spray coatings Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E112 Determining average grain size Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E21 Standard test methods for elevated temperature tension tests of metallic materials Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E2465 Analysis of Ni-base alloys by X-ray fluorescence spectrometry Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E340 Macroetching metals and alloys Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E384 Microindentation hardness of materials Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Qualified Grandfathering, no QCS
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E407 Microetching metals and alloys Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E45 Determining the inclusion content of steel Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E572 Analysis of stainless and alloy steels by X-ray fluorescence spectrometry Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E647 Measurement of fatigue crack growth rates (da/dn) High Qualified Grandfathering, no QCS
276095 DIRATS LABORATORIES WESTFIELD USA ASTM E8 Tension testing of metallic materials Low Qualified WITHOUT Young's Modulus determintation
276095 DIRATS LABORATORIES WESTFIELD USA EN 10276 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified WITHOUT Young's Modulus determintation
276095 DIRATS LABORATORIES WESTFIELD USA EN 2002-2 Tensile testing at elevated temperature Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA EN 2002-6 Metallic materials: Bend testing Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA EN 2003-10 Titanium and titanium alloys - Part 10: Sampling for determination of hydrogen content Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA EN 3976 Titanium and titanium alloys - Chemical analysis for the determination of hydrogen content Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA EN 6072 Constant amplitude fatigue testing (HCF) High Qualified "Grandfathering", no QCS issued
276095 DIRATS LABORATORIES WESTFIELD USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified Also according to ASTM E23
276095 DIRATS LABORATORIES WESTFIELD USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified HRB and HRC
276095 DIRATS LABORATORIES WESTFIELD USA ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Authorised to proceed Dec-18
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-01 Fastener test methods - Method 1: Salt Spray Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-03 Fastener test methods - Method 3: Humidity Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-05 Fastener test methods - Method 5: Stress durability Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-06 Fastener test methods - Method 6: Hardness Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-10 Fastener test methods - Method 10: Stress rupture Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-12 Fastener test methods - Method 12: Thickness of metallic coatings Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-14 Fastener test methods - Method 14: Stress durability (internally threaded fasteners) Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-18 Fastener test methods - Method 18: Elevated temperature tensile strength Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA NASM 1312-31 Fastener test methods - Method 31: Torque Low Qualified
276095 DIRATS LABORATORIES WESTFIELD USA Z_Combustion Analysis by combustion Qualified
276095 DIRATS LABORATORIES WESTFIELD USA Z_ICP-MS Inductively coupled plasma mass spectroscopy (ICP-MS) Qualified
Quantitative Chemical Analysis using the Perkin-Elmer NexION 300X ICP-
Mass Spectrometer according to Internal procedure "AWMSR ICP Mass
Spectro Residuals Test Procedure"
276095 DIRATS LABORATORIES WESTFIELD USA Z_IGF Inert gas fusion Qualified
276095 DIRATS LABORATORIES WESTFIELD USA Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Authorised to proceed Dec-18Composites
Limited to Plain Tension (PT - A) and Filled Hole Tension FHT (FHT-C)
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Authorised to proceed Dec-18 A2 – QCS126584
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High QualifiedA1 – QCS126583,
Composites
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low QualifiedComposites
Limited to C2 (thin) FHC specimens.
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High QualifiedComposites - Method 2
QCS130566
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High QualifiedComposites
QCS150343
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany AITM 1-0066 Fibre reinforced plastics – Determination of pull-out / pull-through strength on riveted joints Low Qualified Composites
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Authorised to proceed Dec-18 Composites
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified Composites
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified Composites
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany EN 2850-A (Pren) (ISO 14126-1) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method A High QualifiedComposites
QCS126650
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified Composites
152489 DLR (Braunschweig) Deutsches Zentrum für Luft- und Raumfahrt Braunschweig Germany EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified Composites
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0001 Fiber reinforced plastics - Determination of mechanical degradation due to chemical paint strippers Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0003 Determination of the glass transition temperatures (DMA) High Authorised to proceed Dec-18 QCS pending
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0020 Bending at low temperature Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0030 Sealants - Determination of lap shear strength Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0032 Determination of non hardening characteristic of sealant Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0033 Sealants: Determination of the curing rate of sealing materials Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0044 Determination of the sliding friction behaviour Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0047 Determination of apparent interlaminar shear strength of fibre metal laminates (Glare materials) Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0048 Compression test method of fibre metal laminates (Glare materials) Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 1-0057 Impact resistance of laminate and sandwich Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0001 Fibre reinforced plastics - Determination of the exothermic reaction during curing of prepreg materials Low Authorised to proceed Dec-18
Page 11 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0011 Drying time Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0012 Determination of permeability Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0014 Determination of the effect of thermal exposure Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0016 Determination of the effect of thermal cycling Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0024 Determination of adhesion by wet tape testing Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0027 Determination of colour differences Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0031 Determination of electrical resistivity by ohmic method Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0033 Sealants - Determination of slump Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0034 Sealants - Determination of tack-free time of sealing materials Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0035 Sealants - Determination of shrinkage Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 Pending QCS
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 3-0003 (EN 6042) Analysis of organic compounds by infrared spectroscopy (IR) Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 3-0004 (EN 6043) Determination of gel time and viscosity Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 Pending QCS
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 3-0017 Gas chromatography (GC) Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 3-0022 Determination of amine value Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 3-0023 Determination of viscosities and flow curves using design rotary viscosimeters Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA AITM 3-0025 Determination of solid content Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ASTM C272 Water absorption of core materials for structural sandwich constructions Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ASTM C273 Shear properties of sandwich core materials Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ASTM C297 Standard test method for flatwise tensile strength of sandwich constructions Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ASTM E831 Linear thermal expansion of solid materials by thermomechanical analysis (TMA) Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ASTM F484 Stress crazing of acrylic plastics in contact with liquid or semi-liquid compounds Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2378 Fibre reinforced plastics - Determination of water absorption by immersion Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2378 Fibre reinforced plastics - Determination of water absorption by immersion Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2667-3 (Pren) Non-metallic materials - Foaming structural adhesive films - Test method - Part 3: Expansion ratio and volatile content Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2747 Glass fibre reinforced plastics - Tensile test Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 11358 Plastics - Thermogravimetry (TG) of polymers Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 11359 Plastics - Thermomechanical analysis (TMA) Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 16474 Paints and varnishes - Methods of exposure to laboratory light sources Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 1926 Rigid cellular plastics - Determination of tensile properties Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 2178 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 2409 Paints and varnishes - Cross-cut test Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 2555 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 2813 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 527-3 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 62 Plastics - Determination of water absorption Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 6270-1 Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 844 Rigid cellular plastics - Determination of compression properties Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA ISO 845 Cellular plastics and rubbers - Determination of apparent density Low Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Authorised to proceed Dec-18
298997 ELEMENT MATERIALS TECHNOLOGY - ANAHEIM ANAHEIM USA Z_mechanical tests Various mechanical tests Authorised to proceed Dec-18ASTM D6641 - Compressive properties of polymer matrix composite
materials using a combined loading compression (CLC) test fixture
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA AITM 4-0002 Microstructural characterization of welded aluminium structures Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA AMS 2315 Determination of delta ferrite content Low Qualified Fe
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E112 Determining average grain size Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified Fe, NI, Ti
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified Fe, Ni, Co, Ti
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified Ti base alloy
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified Cu, Ni, Sn
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E34 Chemical analysis of aluminum and aluminum-base alloys Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E340 Macroetching metals and alloys Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E384 Microindentation hardness of materials Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E407 Microetching metals and alloys Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E45 Determining the inclusion content of steel Low Qualified Fe
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ASTM E8 Tension testing of metallic materials Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA EN 10247 Micrographic examination of the non-metallic inclusion content of steels using standard pictures Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified Fe, Al, Cu, Ni, Ti and Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA EN 2002-2 Tensile testing at elevated temperature Low Qualified Fe, Al, Cu, Ni, Ti and Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA EN 2002-6 Metallic materials: Bend testing Low Qualified Fe, Al, Cu, Ni, Ti and Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified Ti
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified Ti
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified Ti
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified Fe, NI, Ti
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified Fe, NI, Ti
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified Ni, Fe, Al, Cu, Ti and Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ISO 6507 (ASTM E92) Vickers hardness test Low Qualified Ni, Fe, Al, Cu, Ti and Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ISO 6508 (ASTM E18) Rockwell hardness test Low QualifiedNi, Fe, Al, Cu, Ti and Various
HRC only
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-01 Fastener test methods - Method 1: Salt Spray Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-05 Fastener test methods - Method 5: Stress durability Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-06 Fastener test methods - Method 6: Hardness Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-10 Fastener test methods - Method 10: Stress rupture Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-12 Fastener test methods - Method 12: Thickness of metallic coatings Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-14 Fastener test methods - Method 14: Stress durability (internally threaded fasteners) Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-15 Fastener test methods - Method 15: Torque - Tension Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-18 Fastener test methods - Method 18: Elevated temperature tensile strength Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-23 Fastener test methods - Method 23: Tensile strength of panel fasteners Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-24 Fastener test methods - Method 24: Receptacle torque-out – Panel fasteners Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-26 Fastener test methods - Method 26: Structural panel fastener lap joint shear Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-27 Fastener test methods - Method 27: Panel fastener sheet pull-up Low Qualified
Page 12 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA NASM 1312-31 Fastener test methods - Method 31: Torque Low Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA QVA-Z10-53-00 Metallographic test - Macroscopic examination - General information Low Qualified Various
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA Z_Combustion Analysis by combustion Qualified Leco Carbon / Sulfur Analyzer
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA Z_IGF Inert gas fusion Qualified Leco Hydrogen Analyzer
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
310769 ELEMENT MATERIALS TECHNOLOGY - CHARLOTTE Charlotte USA Z_Spectro. OES Spectrometry: optical emission (OES) Qualified Al, Co, Cu, Fe, Ni, Ti
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA AITM 4-0002 Microstructural characterization of welded aluminium structures Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA AMS 2315 Determination of delta ferrite content Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM B487 Measurement of metal and oxide coating thicknesses by microscopical examination of a cross-section Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E112 Determining average grain size Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified Ni
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified Ti alloys
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified Ti alloys
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified Ti alloys
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E238 Pin-type bearing test of metallic materials High Qualified QCS 151020
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E2465 Analysis of Ni-base alloys by X-ray fluorescence spectrometry Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified All alloys
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E34 Chemical analysis of aluminum and aluminum-base alloys Low Qualified Al
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E340 Macroetching metals and alloys Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E384 Microindentation hardness of materials Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E407 Microetching metals and alloys Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E45 Determining the inclusion content of steel Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E572 Analysis of stainless and alloy steels by X-ray fluorescence spectrometry Low Qualified Fe, Ni
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E8 Tension testing of metallic materials Low Authorised to proceed Dec-18All alloys
Without Young's Modulus
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ASTM E9 Compression testing of metallic materials at room temperature Low Authorised to proceed Dec-18 All alloys
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 10247 Micrographic examination of the non-metallic inclusion content of steels using standard pictures Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 10276 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron Low Qualified Fe
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Authorised to proceed Dec-18All alloys
Without Young's Modulus
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 2002-2 Tensile testing at elevated temperature Low Authorised to proceed Dec-18Ni
Without Young's Modulus
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 2002-6 Metallic materials: Bend testing Low Qualified Fe
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 2003-10 Titanium and titanium alloys - Part 10: Sampling for determination of hydrogen content Low Qualified Ti
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 2831 Hydrogen embrittlement of steel - Test by slow bending Low Qualified Fe
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 2832 Hydrogen embrittlement of steel - Notched specimen test Low Authorised to proceed Dec-18 Fe
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA EN 6018 Determination of density according to displacement method Low Qualified Fe
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified Fe
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified Fe
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ISO 6507 (ASTM E92) Vickers hardness test Low Qualified Limited to microhardness
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-02 Fastener test methods - Method 2: Interaction Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-05 Fastener test methods - Method 5: Stress durability Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-06 Fastener test methods - Method 6: Hardness Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-07 Fastener test methods - Method 7: Vibration Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-10 Fastener test methods - Method 10: Stress rupture Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-12 Fastener test methods - Method 12: Thickness of metallic coatings Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-14 Fastener test methods - Method 14: Stress durability (internally threaded fasteners) Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-15 Fastener test methods - Method 15: Torque - Tension Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-16 Fastener test methods - Method 16: Clamping force for installation (formed fasteners) Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-17 Fastener test methods - Method 17: Stress relaxation Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-18 Fastener test methods - Method 18: Elevated temperature tensile strength Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-19 Fastener test methods - Method 19: Fastener sealing Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-20 Fastener test methods - Method 20: Single shear Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-22 Fastener test methods - Method 22: Receptacle push-out – Panel fasteners Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-23 Fastener test methods - Method 23: Tensile strength of panel fasteners Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-24 Fastener test methods - Method 24: Receptacle torque-out – Panel fasteners Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-25 Fastener test methods - Method 25: Driving recess torque quality conformance test Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-26 Fastener test methods - Method 26: Structural panel fastener lap joint shear Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-28 Fastener test methods - Method 28: Elevated temperature double shear Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-29 Fastener test methods - Method 29: Measurement techniques for determining shank expanding characteristics of deformable fasteners Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-30 Fastener test methods - Method 30: Sheet pull-up of blind fasteners Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA NASM 1312-31 Fastener test methods - Method 31: Torque Low Qualified
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA Z_Combustion Analysis by combustion Qualified Al, Co, Cu, Fe, Ni, Mg
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA Z_IGF Inert gas fusion Qualified Co, Cu, Fe, Ni, Ti
298998 ELEMENT MATERIALS TECHNOLOGY - CLEVELAND Cleveland USA Z_Spectro. OES Spectrometry: optical emission (OES) Qualified Al, Co, Ni, Fe, Cu, Ti
313780 ELEMENT MATERIALS TECHNOLOGY - HOUSTON REGAL ROW HOUSTON USA ASTM E112 Determining average grain size Low Authorised to proceed Dec-18
313780 ELEMENT MATERIALS TECHNOLOGY - HOUSTON REGAL ROW HOUSTON USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
313780 ELEMENT MATERIALS TECHNOLOGY - HOUSTON REGAL ROW HOUSTON USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
313780 ELEMENT MATERIALS TECHNOLOGY - HOUSTON REGAL ROW HOUSTON USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Authorised to proceed Dec-18
313780 ELEMENT MATERIALS TECHNOLOGY - HOUSTON REGAL ROW HOUSTON USA EN 2003-10 Titanium and titanium alloys - Part 10: Sampling for determination of hydrogen content Low Qualified
313780 ELEMENT MATERIALS TECHNOLOGY - HOUSTON REGAL ROW HOUSTON USA EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified Method A only
313780 ELEMENT MATERIALS TECHNOLOGY - HOUSTON REGAL ROW HOUSTON USA EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA AITM 4-0002 Microstructural characterization of welded aluminium structures Low Qualified
309680 ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH BRANCHHuntington Beach USA AMS 2315 Determination of delta ferrite content Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM B769 Shear testing of aluminium alloys Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E1019
Standard Test Method for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion
TechniquesLow Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E112 Determining average grain size Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E2465 Analysis of Ni-base alloys by X-ray fluorescence spectrometry Low Qualified
Page 13 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
309680 ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH BRANCHHuntington Beach USA ASTM E322 Analysis of low-alloy steels and cast irons by wavelength dispersive X-ray fluorescence spectrometry Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E34 Chemical analysis of aluminum and aluminum-base alloys Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E340 Macroetching metals and alloys Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E384 Microindentation hardness of materials Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E407 Microetching metals and alloys Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E45 Determining the inclusion content of steel Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E572 Analysis of stainless and alloy steels by X-ray fluorescence spectrometry Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E8 Tension testing of metallic materials Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM E9 Compression testing of metallic materials at room temperature Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ASTM G85 Modified salt spray (fog) testing Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 10247 Micrographic examination of the non-metallic inclusion content of steels using standard pictures Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 10276 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 2002-2 Tensile testing at elevated temperature Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 2002-6 Metallic materials: Bend testing Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 2003-10 Titanium and titanium alloys - Part 10: Sampling for determination of hydrogen content Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 27627 Hardmetals - Chemical analysis by flame atomic absorption spectrometry Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 2831 Hydrogen embrittlement of steel - Test by slow bending Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 2832 Hydrogen embrittlement of steel - Notched specimen test Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA EN 6018 Determination of density according to displacement method Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Authorised to proceed Dec-18
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 4193 Aluminium and aluminium alloys - Determination of chromium content - Flame atomic absorption spectrometric method Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified Only according to ASTM E10
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 6507 (ASTM E92) Vickers hardness test Low Qualified Macro vickers only
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 6507 (ASTM E92) Vickers hardness test Low Qualified Micro vickers only
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-01 Fastener test methods - Method 1: Salt Spray Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-02 Fastener test methods - Method 2: Interaction Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-03 Fastener test methods - Method 3: Humidity Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified
309680 ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH BRANCHHuntington Beach USA NASM 1312-05 Fastener test methods - Method 5: Stress durability Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-06 Fastener test methods - Method 6: Hardness Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-07 Fastener test methods - Method 7: Vibration Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-09 Fastener test methods - Method 9: Stress corrosion Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-10 Fastener test methods - Method 10: Stress rupture Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-12 Fastener test methods - Method 12: Thickness of metallic coatings Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-14 Fastener test methods - Method 14: Stress durability (internally threaded fasteners) Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-15 Fastener test methods - Method 15: Torque - Tension Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-16 Fastener test methods - Method 16: Clamping force for installation (formed fasteners) Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-17 Fastener test methods - Method 17: Stress relaxation Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-18 Fastener test methods - Method 18: Elevated temperature tensile strength Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-19 Fastener test methods - Method 19: Fastener sealing Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-20 Fastener test methods - Method 20: Single shear Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-22 Fastener test methods - Method 22: Receptacle push-out – Panel fasteners Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-23 Fastener test methods - Method 23: Tensile strength of panel fasteners Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-24 Fastener test methods - Method 24: Receptacle torque-out – Panel fasteners Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-25 Fastener test methods - Method 25: Driving recess torque quality conformance test Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-26 Fastener test methods - Method 26: Structural panel fastener lap joint shear Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-27 Fastener test methods - Method 27: Panel fastener sheet pull-up Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-28 Fastener test methods - Method 28: Elevated temperature double shear Low Qualified
Page 14 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-29 Fastener test methods - Method 29: Measurement techniques for determining shank expanding characteristics of deformable fasteners Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-30 Fastener test methods - Method 30: Sheet pull-up of blind fasteners Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA NASM 1312-31 Fastener test methods - Method 31: Torque Low Qualified
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA Z_ICP-MS Inductively coupled plasma mass spectroscopy (ICP-MS) Qualified ICP-OES only (no MS)
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA Z_Other Other test - Specify in Remark Qualified
ASTM E1085 (Analysis of low-alloy steels by X-Ray fluorescence
spectrometry)
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA Z_Other Other test - Specify in Remark Qualified
ASTM E1184 (Determination of elements by graphite furnace atomic
absorption spectrometry)
309680ELEMENT MATERIALS TECHNOLOGY - HUNTINGTON BEACH
BRANCHHuntington Beach USA Z_Spectro. OES Spectrometry: optical emission (OES) Qualified
According to ASTM E415 (Atomic emission vacuum spectrometric
analysis of carbon and low-alloy steel) and ASTM E1086 (Atomic
emission vacuum spectrometric analysis of stainless steel by point-to-
plane excitation technique)
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified Qualified Test Chamber ID: ME1000-3_S/N 014 EC# 1368
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified Qualified Test Chamber ID: ME1000-3_S/N 014 EC# 1368
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low QualifiedQualified Test Chamber ID: ME1000-3_S/N 014 EC# 1368, S/N
010720132 EC#1254
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low QualifiedQualified Test Chamber ID: ME1000-3_S/N 014 EC# 1368, S/N
010720132 EC#1254
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High QualifiedQCS150922
Qualified Test Chamber ID: CS-208-206; EC# 1295
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High QualifiedQualified Test Chamber ID: S/N 90706 EC#1255
QCS150978
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Dec-18Qualified Test Chamber ID: S/N 90706 EC#1255
QCS Pending
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low QualifiedQualified Test Chamber ID: ME1000-3 S/N 014 EC# 1368, S/N
010720132 EC#1254
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High QualifiedQualified Test Chamber ID: S/N 90706 EC#1255
QCS151110
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA ASTM C273 Shear properties of sandwich core materials Low Qualified
285144 ELEMENT MATERIALS TECHNOLOGY - LOS ANGELES DUARTE USA ASTM C297 Standard test method for flatwise tensile strength of sandwich constructions Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA AMS 2315 Determination of delta ferrite content Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E1019Standard Test Method for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion
TechniquesLow Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E112 Determining average grain size Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E21 Standard test methods for elevated temperature tension tests of metallic materials Low Qualified No Young's Modulus determination
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E2465 Analysis of Ni-base alloys by X-ray fluorescence spectrometry Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E384 Microindentation hardness of materials Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Qualified Grandfathering, no QCS issued
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E572 Analysis of stainless and alloy steels by X-ray fluorescence spectrometry Low Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ASTM E8 Tension testing of metallic materials Low Qualified No Young's Modulus determination
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low QualifiedASTM B557 only
No Young's Modulus determination
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA EN 6072 Constant amplitude fatigue testing (HCF) High Authorised to proceed Dec-18Grandfathering - No QCS issued
On cylindrical specimens only
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified ASTM E23 only
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified ASTM E23 only
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified ASTM E10 only
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified HRC as per ASTM E18 only
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA Z_Combustion Analysis by combustion Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA Z_Corrosion Corrosion Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA Z_IGF Inert gas fusion Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA Z_Opt. metallo. Optical metallography Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA Z_Prop. oligo-elts Proportioning of oligo-elements Qualified
276084 ELEMENT MATERIALS TECHNOLOGY - SANTA FE SPRINGS SANTA FE SPRINGS USA Z_Spectro. OES Spectrometry: optical emission (OES) Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 01-02-005 Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials Low Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 01-02-008 Torque tightening of screws, bolts and nuts High Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 01-02-017 General assembly and installation of fasteners High Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 01-02-022 Installation of parallel shank threaded fasteners High Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 03-02-019 Manufacture of monolithic parts with thermoset prepreg materials High Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 03-07-002 Machining of fibre reinforced plastic (FRP) components High Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 05-05-004 Wet installation of fasteners High Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 06-01-003 Surface preparation for thermosetting parts before structural bonding High Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 06-01-004 Mechanical surface preparation of non-structural adherend prior to adhesive bonding Low Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 06-02-002 Non-structural adhesive bonding Low Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AIPS/AIPI 06-02-006 Structural bonding of thermoset and thermoplastic matrices compocite parts High Qualified QCS161062
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 131032
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS 110894
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS 111414
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Qualified QCS 150672
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS 150345
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0024 Determination of the completeness of cure of organic coatings Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0030 Sealants - Determination of lap shear strength Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0042 (ASTM E647) Determination of fatigue crack growth rates for aluminium clad sheet and clad plate up to 12 mm in constant-load-amplitude tests - K-increasing method High QualifiedQCS150084
restricted to specimens of the type CT.
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS 120350
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0065 Fiber reinforced plastics - Determination of joint strength of mechanically fastened joints High Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0066 Fibre reinforced plastics – Determination of pull-out / pull-through strength on riveted joints Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0067 Determination of tension through the hole strength on fastened joints Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0070 Surface roughness measurements using surface stylus methods Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 1-0076 Fibre reinforced plastics - Determination of compression aand tension strength after edge impact High Authorised to proceed Dec-18Limited for thicknesses < 6 mm.
Pending QCS
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 2-0031 Determination of electrical resistivity by ohmic method Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 3-0003 (EN 6042) Analysis of organic compounds by infrared spectroscopy (IR) Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 3-0004 (EN 6043) Determination of gel time and viscosity Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS pending
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 4-0003 Test method for determining the pore content of fibre reinforced plastics using automatic image analysis High Authorised to proceed Dec-18 QCS Pending
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain AMS 2315 Determination of delta ferrite content Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM C273 Shear properties of sandwich core materials Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM C363 Node tensile strength of honeycomb core materials Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM C365 Flatwise compressive properties of sandwich cores Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM C393 Core shear properties of sandwich constructions by beam flexure Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM D1781 Climbing drum peel for adhesives Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM D732 Standard test method for shear strength of plastics by punch tool Low Qualified
Page 15 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E111 Young’s modulus, tangent modulus, and chord modulus High Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E112 Determining average grain size Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E1251 Analysis of aluminum and aluminum alloys by Atomic Emission Spectrometry Low Authorised to proceed Jun-18
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E238 Pin-type bearing test of metallic materials High Qualified QCS 090782
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E2602 Assignment of the glass transition temperature by modulated temperature differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending.
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E340 Macroetching metals and alloys Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Qualified QCS 090795
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E407 Microetching metals and alloys Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E647 Measurement of fatigue crack growth rates (da/dn) High Qualified QCS 090788
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E8 Tension testing of metallic materials Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM E9 Compression testing of metallic materials at room temperature Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ASTM G85 Modified salt spray (fog) testing Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2002-2 Tensile testing at elevated temperature Low Authorised to proceed Dec-18
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified Method A
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2332 Textile glass fibre preimpregnates - Test method for the determination of the resin flow Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2823 (prEN) Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2850-A (Pren) (ISO 14126-1) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method A High Qualified QCS126664
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 6072 Constant amplitude fatigue testing (HCF) High Qualified QCS 090787
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain EN 6072 (machining) Fatigue test specimen machining (NADCAP test code O) Qualified QCS 090787
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Authorised to proceed Sep-18
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 2409 Paints and varnishes - Cross-cut test Low Authorised to proceed Sep-18
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 2808 Paints and varnishes - Determination of film thickness Low Authorised to proceed Sep-18 Limited to Methd 7D & 12B
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 4578 Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 4587 Adhesive - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 527-4 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fiber reinforced plastic composites Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 604 Plastics - Determination of compressive properties Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain TT2 Component & Large Sub-component Test Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain TT4 Bespoke Test Bench Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain TT8 Standard Test Bench <= 5 MN Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain Z_Comp. spec. prod. Composite specimen production Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain Z_mechanical tests Various mechanical tests Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain Z_mechanical tests Various mechanical tests QualifiedASTM D6641 - Compressive properties of polymer matrix composite
materials using a combined loading compression (CLC) test fixture
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain Z_Opt. metallo. Optical metallography Qualified
277364 ELEMENT MATERIALS TECHNOLOGY SEVILLE SLU LA RINCONADA Spain Z_Physical tests Various physical tests Qualified
156211 EMCC DR. RASEK UNTERLEINLEITER Germany Z_Other Other test - Specify in Remark QualifiedElectromagnetic Compatibility (EMC)
Test methods as per covered in ISO17025 accreditation scope.
156211 EMCC DR. RASEK UNTERLEINLEITER Germany Z_Other Other test - Specify in Remark QualifiedRadio Equipment & Systems
Test methods as per covered in ISO17025 accreditation scope.
156211 EMCC DR. RASEK UNTERLEINLEITER Germany Z_Other Other test - Specify in Remark QualifiedSafety Electrical appliances
Test methods as per covered in ISO17025 accreditation scope.
156211 EMCC DR. RASEK UNTERLEINLEITER Germany Z_Other Other test - Specify in Remark QualifiedEnvironmental testing
Test methods as per covered in ISO17025 accreditation scope.
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AIPS/AIPI 01-02-005 Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials Low Qualified
LIMITED FOR TEST SPECIMENS MACHINING.
NOTE: ACTIVITY CARRIED OUT BY MPS ON BEHALF OF ETIM AT
ETIM FACILITY AND UNDER ETIM RESPONSIBILITY
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AIPS/AIPI 01-02-008 Torque tightening of screws, bolts and nuts High Qualified LIMITED FOR TEST SPECIMENS MACHINING.
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AIPS/AIPI 01-02-022 Installation of parallel shank threaded fasteners High Qualified LIMITED FOR TEST SPECIMENS MACHINING.
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AIPS/AIPI 03-07-002 Machining of fibre reinforced plastic (FRP) components High Qualified
LIMITED FOR TEST SPECIMENS MACHINING.
NOTE: ACTIVITY CARRIED OUT BY MPS ON BEHALF OF ETIM AT
ETIM FACILITY AND UNDER ETIM RESPONSIBILITY
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0003 Determination of the glass transition temperatures (DMA) High QualifiedQCS 160011
Restricted to TA Instruments DMA Q800 equipment
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS 111538
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified Also according to IGC 04-26-260, IGC 04-26-250 and IGC 04-26-252
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS111409 limited to A2 (thin) specimens with unguide fixture
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS126575 Type A1 only (HCCF fixture)
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS140375 limited to A2 (thin) specimens with HCCF fixtures
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0008-A3 Fiber reinforced plastics - Determination of plain compression strength (loads < 500 kN) High Qualified
QCS131181
Only E-modulus determination is qualified.
Range for E-Modulus calculation used Nominal failure load provided by
customer or Range provided by customer
Failure load obtained by Etim will never be considered as valid
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified Also according to IGC 04-26-280
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS126622 - Valid for the Issue 3 of the norm
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 1-0070 Surface roughness measurements using surface stylus methods Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 3-0001 (EN 6040) Analysis of thermoset systems by high performance liquid chromatography (HPLC) Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18QCS 160012
Restricted to TA Instruments DSC Q200 equipment
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18QCS 170255
Restricted to TA Instruments DSC Q200 equipment
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 4-0003 Test method for determining the pore content of fibre reinforced plastics using automatic image analysis High Qualified QCS 130596
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified Qualif ref n° A12/01185
Page 16 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ASTM C273 Shear properties of sandwich core materials Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ASTM C365 Flatwise compressive properties of sandwich cores Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ASTM E2602 Assignment of the glass transition temperature by modulated temperature differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 Pending QCS
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified Also according to IGC 04-25-346 and IGC 04-26-350
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified Also according to IGC 04-26-360
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified Also according to IGC 04-26-270
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified Also according to IGC 04-25-245 and IGC 04-26-246
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified Also according to IGC 04-25-235
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2823 (prEN) Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ISO 14125 Fiber reinforced plastic composites - Determination of flexural properties Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ISO 178 Plastics – Determination of flexural properties Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ISO 4578 Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ISO 527-4 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fiber reinforced plastic composites Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France Z_mechanical tests Various mechanical tests QualifiedASTM D6641 - Compressive properties of polymer matrix composite
materials using a combined loading compression (CLC) test fixture
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France Z_Other Other test - Specify in Remark Qualified IGC 04-26-335: Intumescent Adhesives - Determination of expansion rate
301462 ETIM - LABORATOIRE DE TESTS COMPOSITES BOUGUENAIS France Z_Other Other test - Specify in Remark QualifiedIGC 04-62-156: Securing of bushes, bearings and ball joints using Loctite
ADET 0033
295927 EXOVA AB LINKOPING LINKÖPING Sweden AIPS/AIPI 03-02-018 Manufacture of structural sandwich parts with thermosetting fibre reinforced skins High QualifiedPerformed at ASJ-vägen 7
ME1330208 grandfathering
295927 EXOVA AB LINKOPING LINKÖPING Sweden AIPS/AIPI 03-02-019 Manufacture of monolithic parts with thermoset prepreg materials High QualifiedPerformed at ASJ-vägen 7
ME1330208 grandfathering
295927 EXOVA AB LINKOPING LINKÖPING Sweden AIPS/AIPI 03-08-003 Rework and repair of Structures Manufactured from Composite Materials (Laminates and Sandwich) High QualifiedPerformed at ASJ-vägen 7
ME1330208 grandfathering
295927 EXOVA AB LINKOPING LINKÖPING Sweden AIPS/AIPI 06-01-003 Surface preparation for thermosetting parts before structural bonding High QualifiedPerformed at ASJ-vägen 7
ME1330208 grandfathering
295927 EXOVA AB LINKOPING LINKÖPING Sweden AIPS/AIPI 06-01-004 Mechanical surface preparation of non-structural adherend prior to adhesive bonding Low QualifiedPerformed at ASJ-vägen 7
ME1330208 grandfathering
295927 EXOVA AB LINKOPING LINKÖPING Sweden AIPS/AIPI 06-02-002 Non-structural adhesive bonding Low QualifiedPerformed at ASJ-vägen 7
ME1330208 grandfathering
295927 EXOVA AB LINKOPING LINKÖPING Sweden AIPS/AIPI 06-02-006 Structural bonding of thermoset and thermoplastic matrices compocite parts High QualifiedPerformed at ASJ-vägen 7
ME1330208 grandfathering
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0003 Determination of the glass transition temperatures (DMA) High Authorised to proceed Dec-18 Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High QualifiedPerformed at ASJ-vägen 7
QTP/QTR/QCS 111307
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 3-0003 (EN 6042) Analysis of organic compounds by infrared spectroscopy (IR) Low Qualified Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
Performed at Nobymalmsvägen
-NCF-EXOVA-AITM3-0030 approved by Airbus Engineering (Jan 28th,
2016)
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
Performed at Nobymalmsvägen
-Restricted to Analysis of Metals in Galvanic Bathes by Flame Atomic
Absortion Spectrometry
-NCF-EXOVA-AITM3-0032 approved by Airbus Engineering (Jan 28th,
2016)
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low QualifiedPerformed at Nobymalmsvägen
Surface Treatment Solutions
295927 EXOVA AB LINKOPING LINKÖPING Sweden AITM 3-0038 Determination of non-volatile-residue Low QualifiedPerformed at Nobymalmsvägen
Water
295927 EXOVA AB LINKOPING LINKÖPING Sweden ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low QualifiedPerformed at ASJ-vägen 7
Aluminium
295927 EXOVA AB LINKOPING LINKÖPING Sweden ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden ASTM E3 Standard guide for preparation of metallographic specimens Low QualifiedPerformed at ASJ-vägen 7
Aluminium
295927 EXOVA AB LINKOPING LINKÖPING Sweden ASTM E340 Macroetching metals and alloys Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden ASTM E407 Microetching metals and alloys Low QualifiedPerformed at ASJ-vägen 7
Aluminium
295927 EXOVA AB LINKOPING LINKÖPING Sweden ASTM E831 Linear thermal expansion of solid materials by thermomechanical analysis (TMA) Low Qualified Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low QualifiedPerformed at ASJ-vägen 7
Aluminium
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Disqualified Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 27627 Hardmetals - Chemical analysis by flame atomic absorption spectrometry QualifiedPerformed at ASJ-vägen 7
Surface Treatment Solutions
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 11358 Plastics - Thermogravimetry (TG) of polymers Low Qualified Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 11359 Plastics - Thermomechanical analysis (TMA) Low Qualified Performed at Nobymalmsvägen
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 2106 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Authorised to proceed Dec-18Performed at ASJ-vägen 7
Aluminium
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 2409 Paints and varnishes - Cross-cut test Low QualifiedPerformed at ASJ-vägen 7
Aluminium
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified Performed at ASJ-vägen 7
Page 17 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 4624 Paints and varnishes - Pull-off test for adhesion Low Qualified Performed at ASJ-vägen 7
295927 EXOVA AB LINKOPING LINKÖPING Sweden ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Authorised to proceed Dec-18Performed at ASJ-vägen 7
Aluminium
295927 EXOVA AB LINKOPING LINKÖPING Sweden Z_Opt. metallo. Optical metallography QualifiedPerformed at ASJ-vägen 7
Aluminium
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AIPS/AIPI 01-02-005 Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials Low Qualified ME1330208 grandfathering
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AIPS/AIPI 01-02-008 Torque tightening of screws, bolts and nuts High Qualified ME1330208 grandfathering
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AIPS/AIPI 01-02-017 General assembly and installation of fasteners High Qualified ME1330208 grandfathering
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AIPS/AIPI 01-02-022 Installation of parallel shank threaded fasteners High Qualified ME1330208 grandfathering
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AIPS/AIPI 03-07-002 Machining of fibre reinforced plastic (FRP) components High Qualified ME1330208 grandfathering
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AIPS/AIPI 05-05-004 Wet installation of fasteners High Qualified ME1330208 grandfathering
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Disqualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 131033 (TA DMA Q800)
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS 171063
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Authorised to proceed Sep-18
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS126585 type A1
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS126586 type A2
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Qualified QCS 120463
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified
QCS160738
NDT inspection done by NDT Expert/Testia France (qualified by Airbus for
NDT).
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High QualifiedValid for the Issue 3 of the norm
QCS 160747
219624 EXOVA BRIDGWATER SOMERSET United Kingdom AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ASTM D2734 Void content of reinforced plastics Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ASTM E112 Determining average grain size Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ASTM E340 Macroetching metals and alloys Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ASTM E407 Microetching metals and alloys Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low DisqualifiedTitanium and Titanium Alloys
Including Young's Modulus
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low QualifiedIncluding Young's Modulus
All Alloys EXCEPT Titanium
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2002-6 Metallic materials: Bend testing Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Disqualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Authorised to proceed Sep-18
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Authorised to proceed Sep-18
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified Restricted ONLY to method B of the norm.
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom EN 6072 Constant amplitude fatigue testing (HCF) High Authorised to proceed Dec-18Pending QCS
Limited to High capacity frames for Airbus direct work only
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 10119 Carbon fibre - Determination of density Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 17639 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 3887 Steels - Determination of depth of decarburization Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 5173 Destructive tests on welds in metallic materials - Bend tests Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom Z_Comp. spec. prod. Composite specimen production Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
219624 EXOVA BRIDGWATER SOMERSET United Kingdom Z_Opt. metallo. Optical metallography Qualified
According to ABP 2-4099 issue 7 - Approval of Welding and brazing
operators
Restricted to:
- Chapter 6.6.1 - Examination of Welded test pieces
- Chapter 6.6.2 - Examination of Flame brazed test pieces
219624 EXOVA BRIDGWATER SOMERSET United Kingdom Z_Other Other test - Specify in Remark Qualified
According to ABP 2-4100 issue 4 - Electric Resistance Welding
Restricted to:
- Appendix C - Process Control Testing (Shear, Peel / Chisel, Micro)
- Appendix D - Acceptance Standard for Spot & Seam Welded Joints -
Except Chapter 7 (Radiographic examinat
219624 EXOVA BRIDGWATER SOMERSET United Kingdom Z_Other Other test - Specify in Remark Qualified
According to BS 131-1 Notched bar tests, the Izod impact test of metals.
(BS S100 : Procedure for inspection, testing and acceptance of wrought
steels (other than plate, sheet, strip and tube)
143441 EXOVA LANCASTER LANCASTER United Kingdom AITM 1-0042 (ASTM E647) Determination of fatigue crack growth rates for aluminium clad sheet and clad plate up to 12 mm in constant-load-amplitude tests - K-increasing method High Qualified
Alloys of Al, Ti, Ni, Steels
QCS150077: Limited to CT Specimens and DCPD (Direct Current
Potential Diffe
143441 EXOVA LANCASTER LANCASTER United Kingdom ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Authorised to proceed Dec-18Alloys of Al, Ti, Ni, Steels
QCS pending /
143441 EXOVA LANCASTER LANCASTER United Kingdom ASTM E647 Measurement of fatigue crack growth rates (da/dn) High Authorised to proceed Dec-18QCS pending / Alloys of Al, Ti, Ni, Steels
100KN to 500KN test frames & Clip Gauges
143441 EXOVA LANCASTER LANCASTER United Kingdom EN 6072 Constant amplitude fatigue testing (HCF) High Authorised to proceed Dec-18 QCS pending / Alloys of Al, Ti, Ni, Steels
143441 EXOVA LANCASTER LANCASTER United Kingdom EN 6072 (machining) Fatigue test specimen machining (NADCAP test code O) Authorised to proceed Dec-18 QCS pending / Alloys of Al, Ti, Ni, Steels
143441 EXOVA LANCASTER LANCASTER United Kingdom Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified Alloys of Al, Ti, Ni, Steels
304743 EXOVA PLZEN Plzen Czech Republic ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E112 Determining average grain size Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E1181 Standard test methods for characterizing duplex grain sizes Low Authorised to proceed Dec-18 Wainting Technical qualification (High complexity since December 2017)
304743 EXOVA PLZEN Plzen Czech Republic ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E340 Macroetching metals and alloys Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E384 Microindentation hardness of materials Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Authorised to proceed Dec-18 Pending QCS
304743 EXOVA PLZEN Plzen Czech Republic ASTM E407 Microetching metals and alloys Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E45 Determining the inclusion content of steel Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ASTM E8 Tension testing of metallic materials Low Qualified limitation: not qualified for Young Modulus
304743 EXOVA PLZEN Plzen Czech Republic ASTM E930 Standard test methods for estimating the largest grain observed in a metallographic section (ALA grain size) Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic EN 10247 Micrographic examination of the non-metallic inclusion content of steels using standard pictures Low Qualified
Page 18 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
304743 EXOVA PLZEN Plzen Czech Republic EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified limitation: not qualified for Young Modulus
304743 EXOVA PLZEN Plzen Czech Republic EN 2002-2 Tensile testing at elevated temperature Low QualifiedWithout Young Modulus
Also according to ASTM E21
304743 EXOVA PLZEN Plzen Czech Republic EN 2002-5 Test methods for metallic materials - Part 5: Uninterrupted creep and stress-rupture testing Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic EN 6072 Constant amplitude fatigue testing (HCF) High Authorised to proceed Dec-18 Pending QCS
304743 EXOVA PLZEN Plzen Czech Republic EN 6072 (machining) Fatigue test specimen machining (NADCAP test code O) Authorised to proceed Dec-18 Pending QCS
304743 EXOVA PLZEN Plzen Czech Republic ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
304743 EXOVA PLZEN Plzen Czech Republic Z_IGF Inert gas fusion Qualified Ti based alloys
304743 EXOVA PLZEN Plzen Czech Republic Z_Opt. metallo. Optical metallography Qualified Various materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Authorised to proceed Oct-18 Austentic and Duplex Stainless Steels
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Authorised to proceed Oct-18 Fe-alloy
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E1019Standard Test Method for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion
TechniquesLow Authorised to proceed Oct-18 Steel, Iron, Nickel and Cobalt Alloys
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E1077 Standard test methods for estimating the depth of decarburization of steel specimens Low Authorised to proceed Oct-18 Fe-alloy
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E112 Determining average grain size Low Authorised to proceed Oct-18
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Authorised to proceed Oct-18 Titanium
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Authorised to proceed Oct-18 Titanium
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Authorised to proceed Oct-18 Titanium
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Authorised to proceed Oct-18 Titanium
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E2465 Analysis of Ni-base alloys by X-ray fluorescence spectrometry Low Authorised to proceed Oct-18 Nickel Alloys
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E3 Standard guide for preparation of metallographic specimens Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E340 Macroetching metals and alloys Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E384 Microindentation hardness of materials Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E407 Microetching metals and alloys Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E45 Determining the inclusion content of steel Low Authorised to proceed Oct-18
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E572 Analysis of stainless and alloy steels by X-ray fluorescence spectrometry Low Authorised to proceed Oct-18 Nickel Alloys
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E8 Tension testing of metallic materials Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ASTM E930 Standard test methods for estimating the largest grain observed in a metallographic section (ALA grain size) Low Authorised to proceed Oct-18
156 EXOVA TEESSIDE Middlesbrough United Kingdom EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom EN 2002-2 Tensile testing at elevated temperature Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Authorised to proceed Oct-18 Titanium
156 EXOVA TEESSIDE Middlesbrough United Kingdom ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ISO 17639 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds Low Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom ISO 5173 Destructive tests on welds in metallic materials - Bend tests Low Authorised to proceed Oct-18 Weldments
156 EXOVA TEESSIDE Middlesbrough United Kingdom ISO 6506 (ASTM E10) Brinell hardness test Low Authorised to proceed Oct-18
156 EXOVA TEESSIDE Middlesbrough United Kingdom ISO 6507 (ASTM E92) Vickers hardness test Low Authorised to proceed Oct-18
156 EXOVA TEESSIDE Middlesbrough United Kingdom ISO 6508 (ASTM E18) Rockwell hardness test Low Authorised to proceed Oct-18
156 EXOVA TEESSIDE Middlesbrough United Kingdom ISO 6892Metallic materials - Tensile testing - Part 1: Method of test at room temperature / Part 2: Method of test at elevated temperature / Part 3: Method of test at low
temperatureLow Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom Z_Corrosion Corrosion Authorised to proceed Oct-18 Austentic and Duplex Stainless Steels
156 EXOVA TEESSIDE Middlesbrough United Kingdom Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom Z_Opt. metallo. Optical metallography Authorised to proceed Oct-18 Metallic materials
156 EXOVA TEESSIDE Middlesbrough United Kingdom Z_Spectro Analysis by spectrometry (others) Authorised to proceed Oct-18
Aluminium , Cobalt, Nickel, Ferrous Based - Low Alloy & Stainless Steel,
Titanium & Titanium Aluminide Alloys (XRF). All of the above alloys for
ICP-OES, XRF in brackets
156 EXOVA TEESSIDE Middlesbrough United Kingdom Z_Spectro. OES Spectrometry: optical emission (OES) Authorised to proceed Oct-18 Ferrous Based - Low alloy & Stainless Steel
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low QualifiedQCS100062
Composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 160030_i1
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS151146
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low QualifiedQCS100062
composites
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified A1 - QCS111411
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified A2 - QCS111411
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low QualifiedQCS100062
Composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Qualified
QCS100062
Alu, Ti, composite
QCS 111303
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High QualifiedQCS111303
Composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0019 Determination of tensile lap shear strength of composite joints Low QualifiedQCS100062
Composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0024 Determination of the completeness of cure of organic coatings Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low QualifiedQCS100062
Composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0030 Sealants - Determination of lap shear strength Low Qualified alu
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0047 Determination of apparent interlaminar shear strength of fibre metal laminates (Glare materials) Low Qualified composites
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0048 Compression test method of fibre metal laminates (Glare materials) Low Qualified composites
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0049 Tensile test method of fibre metal laminates (Glare materials) Low Qualified Acier, titane, alu
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0050-A / B Test method for the determination of blunt notch open and filled hole tensile strength of fibre metal laminates (Glare materials) Low Qualified Acier, titane, alu
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High QualifiedQCS140130
Valid for Issue 5
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0059 In-plane-shear test on fibre metal laminates (Glare material) Low Qualified composites
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0066 Fibre reinforced plastics – Determination of pull-out / pull-through strength on riveted joints Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0067 Determination of tension through the hole strength on fastened joints Low Qualified composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 1-0069 Fibre reinforced plastics - Determination of curved-beam failure load High Authorised to proceed Dec-18Composite with non-flexible fixtures
Pending QCS
147019 EXOVA TOULOUSE COLOMIERS France AITM 2-0013 Determination of sealant adhesion by linear debonding test High Qualified LIMITATION to the section 8 – No TQ/QCS Required
147019 EXOVA TOULOUSE COLOMIERS France AITM 2-0046 Temporary Protectives - Determination of tack Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France AITM 3-0006 Fibre reinforced plastics - Determination of material degradation due to chemical products Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified Alu + acier
147019 EXOVA TOULOUSE COLOMIERS France ASTM B213 Standard test methods for flow rate of metal powders using the hall flow meter funnel Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM B214 Standard test method for sieve analysis of metal powders Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM B215 Standard practices for sampling metal powders Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM B417 Standard test method for apparent density of non-free-flowing metal powders using the Carney funnel Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM B527 Standard test method for determination of tap density of metallic powders and compounds Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM B769 Shear testing of aluminium alloys Low Qualified All types of alloys
147019 EXOVA TOULOUSE COLOMIERS France ASTM B822 Standard test method for particle size distribution of metal powders and related compounds by light scattering Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM E111 Young’s modulus, tangent modulus, and chord modulus High Authorised to proceed Dec-18
147019 EXOVA TOULOUSE COLOMIERS France ASTM E112 Determining average grain size Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France ASTM E238 Pin-type bearing test of metallic materials High QualifiedAcier, titane, alu, Inco
QCS 151194
147019 EXOVA TOULOUSE COLOMIERS France ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France ASTM E340 Macroetching metals and alloys Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France ASTM E384 Microindentation hardness of materials Low Qualified Alu, acier, titane, Inco
147019 EXOVA TOULOUSE COLOMIERS France ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Authorised to proceed Dec-18Acier, titane, alu, Inco
Pending QCS
147019 EXOVA TOULOUSE COLOMIERS France ASTM E407 Microetching metals and alloys Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France ASTM E45 Determining the inclusion content of steel Low Qualified acier
147019 EXOVA TOULOUSE COLOMIERS France ASTM E647 Measurement of fatigue crack growth rates (da/dn) High Qualified Acier, titane, alu, Inco
147019 EXOVA TOULOUSE COLOMIERS France ASTM E8 Tension testing of metallic materials Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ASTM E9 Compression testing of metallic materials at room temperature Low Qualified Acier, titane, alu, Inco
147019 EXOVA TOULOUSE COLOMIERS France ASTM F2111-A Standard practice for measuring intergranular attack or end grain pitting on metals caused by aircraft chemical processes Low Qualified
Page 19 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
147019 EXOVA TOULOUSE COLOMIERS France ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified alu
147019 EXOVA TOULOUSE COLOMIERS France ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified alu
147019 EXOVA TOULOUSE COLOMIERS France ASTM G44 Standard practice for exposure of metals and alloys by alternate immersion in neutral 3.5 % sodium chloride solution High QualifiedAlu
QCS 151182
147019 EXOVA TOULOUSE COLOMIERS France ASTM G47 Determining susceptibility to stress-corrosion cracking of 2XXX and 7XXX aluminum alloy products High QualifiedAlu
QCS 151182
147019 EXOVA TOULOUSE COLOMIERS France ASTM G49 Standard practice for preparation and use of direct tension stress-corrosion test specimens High QualifiedAlu
QCS 151182
147019 EXOVA TOULOUSE COLOMIERS France EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified Acier, titane, alu
147019 EXOVA TOULOUSE COLOMIERS France EN 2002-2 Tensile testing at elevated temperature Low Qualified Acier, titane, alu, Inco
147019 EXOVA TOULOUSE COLOMIERS France EN 2002-6 Metallic materials: Bend testing Low Qualified Acier, titane, alu
147019 EXOVA TOULOUSE COLOMIERS France EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified Titane
147019 EXOVA TOULOUSE COLOMIERS France EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified QCS100062
147019 EXOVA TOULOUSE COLOMIERS France EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified QCS100062
147019 EXOVA TOULOUSE COLOMIERS France EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low QualifiedQCS100062
Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low QualifiedQCS100062
Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low QualifiedQCS100062
Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low QualifiedQCS100062
Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified QCS100062
147019 EXOVA TOULOUSE COLOMIERS France EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 2832 Hydrogen embrittlement of steel - Notched specimen test Low Qualified Acier
147019 EXOVA TOULOUSE COLOMIERS France EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France EN 3212 Paints and varnishes - Corrosion test by alternate immersion in a buffered sodium chloride solution Low Qualified alu
147019 EXOVA TOULOUSE COLOMIERS France EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified QCS100062
147019 EXOVA TOULOUSE COLOMIERS France EN 3665 Paints and varnishes - Filiform corrosion resistance test on aluminium alloys Low Qualified alu
147019 EXOVA TOULOUSE COLOMIERS France EN 6072 Constant amplitude fatigue testing (HCF) High Qualified Acier, titane, alu, Inco
147019 EXOVA TOULOUSE COLOMIERS France EN 6072 (machining) Fatigue test specimen machining (NADCAP test code O) Qualified Acier, titane, alu, base Nickel, Inco
147019 EXOVA TOULOUSE COLOMIERS France ISO 13320 Particle size analysis - Laser diffraction methods Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Authorised to proceed Dec-18 Acier, titane, alu
147019 EXOVA TOULOUSE COLOMIERS France ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified Acier, titane, alu
147019 EXOVA TOULOUSE COLOMIERS France ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified alu
147019 EXOVA TOULOUSE COLOMIERS France ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Qualified Acier, titane, alu
147019 EXOVA TOULOUSE COLOMIERS France ISO 2409 Paints and varnishes - Cross-cut test Low Qualified Alu / composite
147019 EXOVA TOULOUSE COLOMIERS France ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified Alu / composite
147019 EXOVA TOULOUSE COLOMIERS France ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified Alu / composite
147019 EXOVA TOULOUSE COLOMIERS France ISO 2819 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France ISO 3887 Steels - Determination of depth of decarburization Low Qualified Acier
147019 EXOVA TOULOUSE COLOMIERS France ISO 4287 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ISO 4288 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture Low Qualified
147019 EXOVA TOULOUSE COLOMIERS France ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified restricted to Vickers microhardness tests
147019 EXOVA TOULOUSE COLOMIERS France ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified Composite
147019 EXOVA TOULOUSE COLOMIERS France ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France ISO 6506 (ASTM E10) Brinell hardness test Low Qualified Alu, acier, titane
147019 EXOVA TOULOUSE COLOMIERS France ISO 6507 (ASTM E92) Vickers hardness test Low Qualified Alu, acier, titane
147019 EXOVA TOULOUSE COLOMIERS France ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified Alu, acier, titane
147019 EXOVA TOULOUSE COLOMIERS France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low QualifiedAlu + acier
PTP 2017 failed
147019 EXOVA TOULOUSE COLOMIERS France NASM 1312-01 Fastener test methods - Method 1: Salt Spray Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified Alu
147019 EXOVA TOULOUSE COLOMIERS France NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified Alu, acier, titane
147019 EXOVA TOULOUSE COLOMIERS France NASM 1312-12 Fastener test methods - Method 12: Thickness of metallic coatings Low Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France NASM 1312-18 Fastener test methods - Method 18: Elevated temperature tensile strength Low Qualified Acier, titane, alu,
147019 EXOVA TOULOUSE COLOMIERS France Z_mechanical tests Various mechanical tests Qualified Acier, titane, alu
147019 EXOVA TOULOUSE COLOMIERS France Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France Z_Opt. metallo. Optical metallography Qualified Acier, titane, alu, base Nickel
147019 EXOVA TOULOUSE COLOMIERS France Z_SEM Scanning Electron Microscopy (SEM) Qualified
307529 EXOVA Warrington Brandhaus Frankfurt am Main Germany AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Authorised to proceed Apr-18Cover materials for walls, ceilings, flooring, table materials, armcaps,
decorative materials, interior materials
307529 EXOVA Warrington Brandhaus Frankfurt am Main Germany AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Authorised to proceed Apr-18 Plastic windows, seat belts, housing materials, small electrical parts
307529 EXOVA Warrington Brandhaus Frankfurt am Main Germany AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Authorised to proceed Apr-18 Cargo or bagage compartment
307529 EXOVA Warrington Brandhaus Frankfurt am Main Germany AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Authorised to proceed Apr-18 Electrical wire insulation materials
307529 EXOVA Warrington Brandhaus Frankfurt am Main Germany AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Authorised to proceed Apr-18
-Cover materials for walls, ceilings, flooring, table materials, armcaps,
decorative materials, foams combinations.
-QCS Pending.
307529 EXOVA Warrington Brandhaus Frankfurt am Main Germany AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Apr-18-Electrical and non-electrical cable
-Missing QCS
307529 EXOVA Warrington Brandhaus Frankfurt am Main Germany AITM 2-0009 Fire resistance of aircraft seat cushion utilizing a high density open flame High Authorised to proceed Apr-18
-Seat cushion combination, backrest cushion combination, heat rest
cushion.
-Missing QCS.
307529 EXOVA Warrington Brandhaus Frankfurt am Main Germany AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Authorised to proceed Apr-18 Metallic heat shrinkable tubings
284503 FIDAMC GETAFE Spain AIPS/AIPI 01-02-005 Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials Low Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 01-02-008 Torque tightening of screws, bolts and nuts High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 01-02-017 General assembly and installation of fasteners High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 01-02-022 Installation of parallel shank threaded fasteners High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 03-02-018 Manufacture of structural sandwich parts with thermosetting fibre reinforced skins High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 03-02-019 Manufacture of monolithic parts with thermoset prepreg materials High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 03-02-020 Manufacturing of monolithic parts with thermoplastic material Low Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 03-02-022 Manufacturing of monolithic and sandwich structural components by impregnation of dry reinforcement materials with thermoset resin High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 03-07-002 Machining of fibre reinforced plastic (FRP) components High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 03-07-021 Preparation of dry fiber preforms for infusion & injection techniques Low Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 03-08-003 Rework and repair of Structures Manufactured from Composite Materials (Laminates and Sandwich) High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 05-05-004 Wet installation of fasteners High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 06-01-003 Surface preparation for thermosetting parts before structural bonding High Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 06-01-004 Mechanical surface preparation of non-structural adherend prior to adhesive bonding Low Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 06-02-002 Non-structural adhesive bonding Low Qualified QCS151312
284503 FIDAMC GETAFE Spain AIPS/AIPI 06-02-006 Structural bonding of thermoset and thermoplastic matrices compocite parts High Qualified QCS151312
284503 FIDAMC GETAFE Spain AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
284503 FIDAMC GETAFE Spain AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 131014
284503 FIDAMC GETAFE Spain AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
284503 FIDAMC GETAFE Spain AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High QualifiedOnly according to AITM 1-0008-A2
QCS 151477
284503 FIDAMC GETAFE Spain AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
284503 FIDAMC GETAFE Spain AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS 140233
284503 FIDAMC GETAFE Spain AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
284503 FIDAMC GETAFE Spain AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS 131365 - Valid for the issue 3 of the norm
284503 FIDAMC GETAFE Spain AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
284503 FIDAMC GETAFE Spain AITM 3-0004 (EN 6043) Determination of gel time and viscosity Low Qualified
284503 FIDAMC GETAFE Spain AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
284503 FIDAMC GETAFE Spain AITM 3-0027 Determination of the melting behaviour and the extent of cristallinity of semi-cristalline materials by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
284503 FIDAMC GETAFE Spain AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified
284503 FIDAMC GETAFE Spain ASTM E2602 Assignment of the glass transition temperature by modulated temperature differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 QCS Pending
284503 FIDAMC GETAFE Spain EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
Page 20 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
284503 FIDAMC GETAFE Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
284503 FIDAMC GETAFE Spain EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
284503 FIDAMC GETAFE Spain EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
300083 FUNDACION CARTIF Boecillo Spain AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS161336
300083 FUNDACION CARTIF Boecillo Spain AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
300083 FUNDACION CARTIF Boecillo Spain AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS170903
300083 FUNDACION CARTIF Boecillo Spain AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Qualified QCS161334
300083 FUNDACION CARTIF Boecillo Spain AITM 3-0003 (EN 6042) Analysis of organic compounds by infrared spectroscopy (IR) Low Qualified
300083 FUNDACION CARTIF Boecillo Spain AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Qualified QCS161335
300083 FUNDACION CARTIF Boecillo Spain EN 2329 Textile glass fibre preimpregnates - Test method for the determination of mass per unit area Low Qualified
300083 FUNDACION CARTIF Boecillo Spain EN 2330 Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter Low Qualified
300083 FUNDACION CARTIF Boecillo Spain EN 2331 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area Low Qualified
300083 FUNDACION CARTIF Boecillo Spain EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
300083 FUNDACION CARTIF Boecillo Spain EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
300083 FUNDACION CARTIF Boecillo Spain EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
300083 FUNDACION CARTIF Boecillo Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified Also according to I+D-E 031
300083 FUNDACION CARTIF Boecillo Spain ISO 2431 Paints and varnishes - Determination of flow time by use of flow cups Low Qualified
300083 FUNDACION CARTIF Boecillo Spain ISO 2811-1 Paints and varnishes - Determination of density - Part 1: Pyknometer method Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ASTM E112 Determining average grain size Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ASTM E340 Macroetching metals and alloys Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ASTM E407 Microetching metals and alloys Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ASTM E8 Tension testing of metallic materials Low Disqualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ASTM F2111-A Standard practice for measuring intergranular attack or end grain pitting on metals caused by aircraft chemical processes Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Disqualified According to ASTM B557
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Disqualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain QVA-Z10-53-00 Metallographic test - Macroscopic examination - General information Low Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
300086 Fundación TECNALIA Research & Innovation DONOSTIA-SAN SEBASTIÁN Spain Z_Opt. metallo. Optical metallography Qualified
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified Bath TSA
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
-Restricted to Analysis of Metals in Galvanic Bathes by Flame Atomic
Absortion Spectrometry
-NCF0141-GACHES-AITM3-0032 approved by Airbus Engineering
(March 29th, 2016)
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low QualifiedBath TSA and 4215
NCLT (Henkel) and ARDROX 295GD (Chemetal)
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France AITM 3-0038 Determination of non-volatile-residue Low Qualified
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France ASTM D1125 Standard Test Methods for Electrical Conductivity and Resistivity of Water Low Qualified
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France ASTM D1293 Standard Test Methods for pH of Water Low Qualified
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France QVA-Z09-07-27 Determination of Chromium (VI) in surface treatment baths Low Qualified
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France QVA-Z09-07-31 Determination of Sulphate in surface treatment baths Low Qualified
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France Z_Other Other test - Specify in Remark Qualified
ASTM D4327: Anions in Water by Suppressed Ion
Chromatography
Demineralised Water and bath diluted
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France Z_Other Other test - Specify in Remark Qualified
Titration of bath formuled for Treatment Surface by Purchaser Method
(Henkel, Chemetall, Ardrox, Socomor)
Bath of surface treatment
Called in IPDA 62-03, IPDA 62-15, IPDA 62-07
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France Z_Other Other test - Specify in Remark QualifiedSurface tension of Cleaning Bath (liquid)
Called in AIPI 09-02-005, IPDA 62-44
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France Z_Other Other test - Specify in Remark Qualified
Visible Spectrophotometer (Cl by Internal Method n° DR02; SiO2 by
Internal Method n° DR01)
Water
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France Z_Other Other test - Specify in Remark Qualified
Analysis of Nitric and Fluorhydric acid bath for Titanium and Inox Surface
Treatment (by Internal Method n° AB19)
Concentration of Ti not included
Called in AIPI 09-02-005, IPDA 62-44
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France Z_Other Other test - Specify in Remark Qualified Analysis of Phospho-Chromic acid bath (by Internal Method n° ABOR08)
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France Z_Other Other test - Specify in Remark Qualified Analysis of Sulfo-Fluorhydric acid bath (by Internal Method n° AB30)
161203 GACHES CHIMIE SPECIALITES TOULOUSE CEDEX France Z_Other Other test - Specify in Remark Qualified
ASTM E663: Standard Practice for Absorption atomic flame (Fe, Zn, Al,
Ti, Cd, Hg, Ni, Cu, Si)
Bath and Water
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany AITM 1-0003 Determination of the glass transition temperatures (DMA) High Authorised to proceed Dec-18 Pending 2018 TQ recovery and QCS
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS 151360
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 Pending 2018 TQ recovery and QCS
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 Pending 2018 TQ recovery and QCS
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany ISO 11357-2 Plastics - Differential scanning calorimetry (DSC) -Part 2: Determination of glass transition Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany ISO 11357-3 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany ISO 527-4 Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fiber reinforced plastic composites Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany QVA-Z10-46-08 Determination of weight per unit area of adhesive foils, prepregs and fibres Low Qualified
307654 GMA-WERKSTOFFPRUEFUNG GMBH AUGSBURG BRANCH AUGSBURG Germany QVA-Z10-46-20 Determination of resin content of prepregs Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0016 Determination of the effect of liquid cleaning agents upon the peel strength of heat cured film adhesive / bonding primer systems Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0017 Determination of the effect of liquid cleaning agents upon the adhesion of paint primers to adhesive bonding primers Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Authorised to proceed Dec-18
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0021 Determination of the effect of liquid cleaning agents upon the properties of elastomeric materials Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0022 Wettability test Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Authorised to proceed Dec-18
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0030 Sealants - Determination of lap shear strength Low Qualified Sealants
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0033 Sealants: Determination of the curing rate of sealing materials Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0047 Determination of apparent interlaminar shear strength of fibre metal laminates (Glare materials) Low QualifiedComposites
(Glare)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0049 Tensile test method of fibre metal laminates (Glare materials) Low QualifiedComposites
(Glare)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 1-0060 T-Type tensile tests on welded joints High QualifiedAl
QCS141036
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 2-0011 Drying time Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0007 Drop (reaction) test on aluminium and aluminium alloys Low QualifiedAlso according to QVA-Z10-58-01 and QVA-Z10-58-02 (Restricted to
Legacy Programs)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0013 Testing of susceptibility to exfolation corrosion in 2XXX and 7XXX series wrought aluminium alloy products Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0015 Determination of phosphoric acid content Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0029 Determination of iron (III) as reactive compound in acidic surface treatment baths Low Qualified Process baths
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified Process baths
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low QualifiedProcess baths
NCF V53D13013279 accepted
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified Process baths
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified Process baths
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Qualified Process baths
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0037 Determination of phosphoric and sulphuric acid in anodizing electrolytes Low Qualified Process baths
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 3-0038 Determination of non-volatile-residue Low Qualified
Page 21 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 4-0002 Microstructural characterization of welded aluminium structures Low Qualified Al
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 5-0009 Determination of resistance to bond line corrosion Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany AITM 7-0003 Sealants - Determination of application time of sealing materials Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM C363 Node tensile strength of honeycomb core materials Low Qualified honeycomb
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E112 Determining average grain size Low Qualified Al, Ti, Steel
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Authorised to proceed Dec-18
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E3 Standard guide for preparation of metallographic specimens Low QualifiedAl, Ti
Also according to QVA-Z10-54-00 (Restricted to Legacy programs)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E340 Macroetching metals and alloys Low Qualified Steel, Aluminium, Titanium, Beryllium-Copper
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E407 Microetching metals and alloys Low Qualified Al, Ti
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E8 Tension testing of metallic materials Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM E9 Compression testing of metallic materials at room temperature Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified Also according to QVA-Z10-59-03 (Restricted to Legacy programs)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified Also according to QVA-Z10-59-04 (Restricted to Legacy programs)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
Also according to DIN EN ISO 6892-1: Tensile testing – Part 1: Method of
test at room temperature
Al, Ti, Fe, Beryllium-Copper, Steel
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified Method A
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Authorised to proceed Dec-18 Al/Epoxy
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified Al / Epoxy
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low QualifiedAl / Epoxy /GFRP
Also according to QVA-Z10-46-05 (Restricted to Legacy programs)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Authorised to proceed Dec-18
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Qualified ONLY according to QVA-Z10-46-01 (Restricted to Legacy programs)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Qualified ONLY according to QVA-Z10-46-06 (Restricted to Legacy programs)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 14125 Fiber reinforced plastic composites - Determination of flexural properties Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 1518 Paints and varnishes - Scratch test Low Qualified Paints
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 2409 Paints and varnishes - Cross-cut test Low Qualified Paints
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 2808 Paints and varnishes - Determination of film thickness Low Authorised to proceed Dec-18 Method 6A — Cross-sectioning - Version 1 — By grinding
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified Paints
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 4578 Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2:
Assessment of degree of blisteringLow Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 6270-2 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
Al, Ti, Fe, Beryllium-Copper
ISO 6506 only
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 6507 (ASTM E92) Vickers hardness test Low QualifiedAl, Ti, Fe
ISO 6507 only
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 6508 (ASTM E18) Rockwell hardness test Low Authorised to proceed Dec-18Al, Ti, Fe
ISO 6508 only - HRC only
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 7619-1 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) Low Qualified Rubber
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 8510-2 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180° peel Low Qualified
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 868 (ASTM D 2240) Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) Low Qualified ISO 868 only
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified Also according to QVA-Z10-59-01 (Restricted to Legacy programs)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Qualified Fastener ( Al, Ti)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified
Also according to the QVA-Z10-37-04: Double-Shear Test on Fasteners
Made from Metallic Materials
Fastener (Al, Ti)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany NASM 1312-20 Fastener test methods - Method 20: Single shear Low Qualified Fastener (Al, Ti)
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z09-07-27 Determination of Chromium (VI) in surface treatment baths Low QualifiedProcess baths
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z09-07-31 Determination of Sulphate in surface treatment baths Low QualifiedProcess baths
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z09-07-36 Determination of Hydroxide in alkaline cleaning baths Low QualifiedProcess baths
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z09-19-01 Determination of the pH-value in Aqueous Media Low QualifiedProcess baths
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z09-20-00 Determination of Water Hardness Low Qualified Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z09-22-00 Determination of Dry Residue Low Qualified Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z09-23-00 Determination of the Specific Conductivity in Aqueous Media Low QualifiedProcess baths
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z09-25-00 Determintation of removal rate of alkaline pickling baths Low QualifiedProcess baths
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z10-53-00 Metallographic test - Macroscopic examination - General information Low Qualified Al, Ti, Fe, CFRP
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany QVA-Z10-61-00 Determination of particle sizes QualifiedProcess baths
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified CFRP / GFRP
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified Al, Ti, Fe, NE-metals
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany Z_Other Other test - Specify in Remark Qualified80-T-35-0020: Alkaline Cleaning (Tendency of the bath to produce pitting)
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany Z_Other Other test - Specify in Remark Qualified
QVA-Z09-11-01 - Inspection of polyalkylene glycol baths
Process baths
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany Z_Other Other test - Specify in Remark QualifiedQVA-Z09-11-00 - Analysis of Saltpetre Melts
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany Z_Other Other test - Specify in Remark QualifiedQVA-Z10-54-03 - Examination for Copper Diffusion in Cladding
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany Z_Other Other test - Specify in Remark Qualified80-T-34-5814 - Stuffer samples (connecting elements)
Restricted to Legacy Programs
305214 GMA-WERKSTOFFPRUEFUNG GMBH NORDENHAM BRANCH NORDENHAM Germany Z_Other Other test - Specify in Remark Qualified80-T-35-2010: Determination of the weight of the coating (chapter 6.1.1)
Restricted to Legacy Programs
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0001 Fiber reinforced plastics - Determination of mechanical degradation due to chemical paint strippers Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 131017
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS130097
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0006 (EN 6034) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode II - GIIc High Qualified Pending QCS
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Authorised to proceed Dec-18
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified A1 – QCS126589
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified A2 – QCS126590
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Qualified QCS141173
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS140455
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified Also qualified for QVA-Z10-46-09 (restricted to Legacy Programs)
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS130097 - Valid for the Issue 4 of the norm
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0066 Fibre reinforced plastics – Determination of pull-out / pull-through strength on riveted joints Low Qualified
Page 22 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 1-0070 Surface roughness measurements using surface stylus methods Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 2-0001 Fibre reinforced plastics - Determination of the exothermic reaction during curing of prepreg materials Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18QCS 080072 i1
QCS101065
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 3-0003 (EN 6042) Analysis of organic compounds by infrared spectroscopy (IR) Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18QCS 080072 i1
QCS101065
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 3-0027 Determination of the melting behaviour and the extent of cristallinity of semi-cristalline materials by differential scanning calorimetry (DSC) High Qualified QCS 080072 i1
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 4-0003 Test method for determining the pore content of fibre reinforced plastics using automatic image analysis High Qualified QCS 090266
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ASTM C273 Shear properties of sandwich core materials Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ASTM C365 Flatwise compressive properties of sandwich cores Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ASTM C393 Core shear properties of sandwich constructions by beam flexure Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ASTM D2734 Void content of reinforced plastics Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ASTM E112 Determining average grain size Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified Also qualified for QVA-Z10-46-03 (restricted to Legacy Programs)
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified Also qualified for QVA-Z10-46-05 (restricted to Legacy Programs)
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2329 Textile glass fibre preimpregnates - Test method for the determination of mass per unit area Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2330 Textile glass fibre preimpregnates - Test method for the determination of the content of volatile matter Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2331 Textile glass fibre preimpregnates - Test method for the determination of the resin and fibre content and mass of fibre per unit area Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2332 Textile glass fibre preimpregnates - Test method for the determination of the resin flow Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified Also qualified for QVA-Z10-46-11 (restricted to Legacy Programs)
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low QualifiedAlso qualified for QVA-Z10-46-33 and I+D-E-242 (restricted to Legacy
Programs)
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Authorised to proceed Dec-18Also qualified for QVA-Z10-46-36 Verf.B and I+D-E-26 (restricted to
Legacy Programs)
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified Also qualified for I+D-E-31 (restricted to Legacy Programs)
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Qualified Also qualified for QVA-Z10-46-01 (restricted to Legacy Programs)
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Qualified
Also qualified for QVA-Z10-46-06 (restricted to Legacy Programs)
EN 2667-2 is historical
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2667-3 (Pren) Non-metallic materials - Foaming structural adhesive films - Test method - Part 3: Expansion ratio and volatile content Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2823 (prEN) Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 1172 Textiles - Glass reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination method Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 14130 Fibre reinforced plastic composites - Determination of apparent interlaminar shear strength by short beam method Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 3801 Textiles; Woven fabrics; Determination of mass per unit length and mass per unit area Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 4287 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 4288 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 527-3 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany QVA-Z10-46-07 Determination of the flow adhesive films Low Qualified Restricted to Legacy Programs
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany QVA-Z10-46-08 Determination of weight per unit area of adhesive foils, prepregs and fibres Low Qualified Restricted to Legacy Programs
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany QVA-Z10-46-18 Chapter 4.3.2 and 4.3.3 Image analytical process for determination of the fibre, resin and pore contents of laminate specimens High QualifiedME0730963 TQ by Dieter Emanowski.
Restricted to Legacy Programs
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany QVA-Z10-46-20 Determination of resin content of prepregs Low Qualified Restricted to Legacy Programs
262425 GMA-WERKSTOFFPRUEFUNG GMBH STADE BRANCH STADE Germany Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
298994 HERB CURRY INC MOUNT VERNON USA AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified
298994 HERB CURRY INC MOUNT VERNON USA AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified
298994 HERB CURRY INC MOUNT VERNON USA AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified
298994 HERB CURRY INC MOUNT VERNON USA AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High Qualified QCS 150912
298994 HERB CURRY INC MOUNT VERNON USA AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Authorised to proceed Dec-18Qualified Test Chamber #ME1100-3
QCS Pending.
298994 HERB CURRY INC MOUNT VERNON USA AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Dec-18 QCS Pending.
298994 HERB CURRY INC MOUNT VERNON USA AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High Authorised to proceed Dec-18Qualified Test Chamber #ME1100-3
QCS Pending.
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany AIPS/AIPI 06-01-003 Surface preparation for thermosetting parts before structural bonding High Authorised to proceed Dec-18 ME1330208 grandfathering
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany AIPS/AIPI 06-02-006 Structural bonding of thermoset and thermoplastic matrices compocite parts High Authorised to proceed Dec-18 ME1330208 grandfathering
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Authorised to proceed Dec-18
GFRP, CFRP
QCS 150338
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Authorised to proceed Dec-18CFRP
QCS 150165
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany AITM 2-0013 Determination of sealant adhesion by linear debonding test High Authorised to proceed Dec-18 QCS 130802
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany AITM 4-0004 Characterization of oxide-layers via scanning electron microscopy (SEM) Low Authorised to proceed Dec-18
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Authorised to proceed Dec-18Metallic samples and components, especially Steel and Al-alloys, coated
samples and components, etc.
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ASTM E3 Standard guide for preparation of metallographic specimens Low Authorised to proceed Dec-18 Metals, CFK, polymers, ceramics
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ASTM E407 Microetching metals and alloys Low Authorised to proceed Dec-18 Diverse alloys
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany EN 3665 Paints and varnishes - Filiform corrosion resistance test on aluminium alloys Low Authorised to proceed Dec-18
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ISO 1518 Paints and varnishes - Scratch test Low Authorised to proceed Dec-18 Treated and untreated Al, Ti, CFRP, GFK, Carbon Steel, Hig-Looks
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ISO 2409 Paints and varnishes - Cross-cut test Low Authorised to proceed Dec-18 Treated and untreated Al, Ti, CFRP, GFK, Carbon Steel, Hig-Looks
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ISO 2808 Paints and varnishes - Determination of film thickness Low Authorised to proceed Dec-18 Treated and untreated Al, Ti, Carbon Steel, Hig-Looks
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ISO 2812-1 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water Low Authorised to proceed Dec-18
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Authorised to proceed Dec-18 Treated and untreated Al, Ti, CFRP, GFK, Carbon Steel, Hig-Looks
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Authorised to proceed Dec-18Metallic samples and components, especially Steel and Al-alloys, coated
samples and components, etc.
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany Z_Failure analysis Failure Analysis - Coordination & Reporting Authorised to proceed Dec-18 Restricted to MPA-Bremen trained FA investigators
160505 IFAM - FRAUNHOFER INSTITUT BREMEN Germany Z_Opt. metallo. Optical metallography Authorised to proceed Dec-18 Metals, CFK, polymers
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified Aluminium cast
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ASTM E112 Determining average grain size Low Qualified Aluminium cast
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ASTM E340 Macroetching metals and alloys Low Qualified Aluminium cast
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ASTM E384 Microindentation hardness of materials Low Qualified
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ASTM E407 Microetching metals and alloys Low Qualified Aluminium cast
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ASTM E45 Determining the inclusion content of steel Low Qualified Aluminium cast
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ASTM E8 Tension testing of metallic materials Low Qualified
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
Page 23 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain ISO 6892Metallic materials - Tensile testing - Part 1: Method of test at room temperature / Part 2: Method of test at elevated temperature / Part 3: Method of test at low
temperatureLow Qualified Restricted to Part 1
310645 IK4 - AZTERLAN DURANGO (BIZKAIA) Spain Z_Opt. metallo. Optical metallography Qualified Aluminium cast
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS151605
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS090544 for A1 /A2 on HCCF device
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0008-A3 Fiber reinforced plastics - Determination of plain compression strength (loads < 500 kN) High Qualified QCS 130478
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Qualified QCS 090548
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS 131071
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0040 Residual stress measurement for metallic plates Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0042 (ASTM E647) Determination of fatigue crack growth rates for aluminium clad sheet and clad plate up to 12 mm in constant-load-amplitude tests - K-increasing method High Qualified QCS090551 - Limited to MT specimens
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0043 (ASTM E561) Determination of crack resistance (R-Curve) for aluminium clad sheet and clad plate up to 12 mm for M(T) specimens High Qualified QCS090552 - Limited MT specimens
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0060 T-Type tensile tests on welded joints High Qualified QCS090564
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0065 Fiber reinforced plastics - Determination of joint strength of mechanically fastened joints High Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0066 Fibre reinforced plastics – Determination of pull-out / pull-through strength on riveted joints Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 1-0067 Determination of tension through the hole strength on fastened joints Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 2-0001 Fibre reinforced plastics - Determination of the exothermic reaction during curing of prepreg materials Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Qualified QCS101065
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 3-0004 (EN 6043) Determination of gel time and viscosity Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Qualified QCS101065
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM B769 Shear testing of aluminium alloys Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E112 Determining average grain size Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E340 Macroetching metals and alloys Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E384 Microindentation hardness of materials Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E407 Microetching metals and alloys Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E45 Determining the inclusion content of steel Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E561 R-curve determination High Qualified QCS 090552
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E647 Measurement of fatigue crack growth rates (da/dn) High Qualified QCS090551 - Limited to MT Specimens
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E831 Linear thermal expansion of solid materials by thermomechanical analysis (TMA) Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ASTM E9 Compression testing of metallic materials at room temperature Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2002-2 Tensile testing at elevated temperature Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2378 Fibre reinforced plastics - Determination of water absorption by immersion Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2850-A (Pren) (ISO 14126-1) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method A High Qualified QCS 090546
169755 IMA GMBH DRESDEN DRESDEN Germany EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified QCS 090546
169755 IMA GMBH DRESDEN DRESDEN Germany EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany EN 6072 Constant amplitude fatigue testing (HCF) High Qualified QCS090549
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 10119 Carbon fibre - Determination of density Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 11358 Plastics - Thermogravimetry (TG) of polymers Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 11359 Plastics - Thermomechanical analysis (TMA) Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 4624 Paints and varnishes - Pull-off test for adhesion Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany TT1 Major Test Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany TT2 Component & Large Sub-component Test Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany TT3 Multi-loading Panel Test Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany TT4 Bespoke Test Bench Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany TT6 High Frequency Test Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany TT8 Standard Test Bench <= 5 MN Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany Z_ACE window A350 FPQ Mechanical Tests for ACE Window Frames on A350 XWB Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany Z_Comp. spec. prod. Composite specimen production Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany Z_Opt. metallo. Optical metallography Qualified
169755 IMA GMBH DRESDEN DRESDEN Germany Z_Spectro. OES Spectrometry: optical emission (OES) Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom AMS 2315 Determination of delta ferrite content Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E112 Determining average grain size Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E2465 Analysis of Ni-base alloys by X-ray fluorescence spectrometry Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E384 Microindentation hardness of materials Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E407 Microetching metals and alloys Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E45 Determining the inclusion content of steel Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ASTM E572 Analysis of stainless and alloy steels by X-ray fluorescence spectrometry Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom EN 10276 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified Without Young's Modulus
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom EN 2002-2 Tensile testing at elevated temperature Low Qualified Without Young's Modulus
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom EN 3976 Titanium and titanium alloys - Chemical analysis for the determination of hydrogen content Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom ISO 671 Steel and cast iron - Determination of sulphur content - Combustion titrimetric method Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom Z_Combustion Analysis by combustion Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom Z_IGF Inert gas fusion Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified
295929 INCOTEST - A DIVISION OF SPECIAL METALS WIGGIN LTD HEREFORD United Kingdom Z_Spectro Analysis by spectrometry (others) Qualified
Page 24 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
308863 Intertek (ITS TESTING SERVICES (UK) LTD) Derby United Kingdom AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
308863 Intertek (ITS TESTING SERVICES (UK) LTD) Derby United Kingdom AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
308863 Intertek (ITS TESTING SERVICES (UK) LTD) Derby United Kingdom AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
308863 Intertek (ITS TESTING SERVICES (UK) LTD) Derby United Kingdom AITM 3-0038 Determination of non-volatile-residue Low Qualified
308863 Intertek (ITS TESTING SERVICES (UK) LTD) Derby United Kingdom ASTM D512 Chloride ion in water Low Qualified Restricted to Method C
299011KATRI - BUSAN BRANCH (KOREA APPAREL TESTING AND
RESEARCH INSTITUTE)Busan South Korea AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified
Composite
QCS 131017
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom AITM 1-0058 Mobile hardness testing Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom AITM 1-0064 Butt welding of aluminium alloys - Bend test Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E112 Determining average grain size Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E34 Chemical analysis of aluminum and aluminum-base alloys Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E340 Macroetching metals and alloys Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E384 Microindentation hardness of materials Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E407 Microetching metals and alloys Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E45 Determining the inclusion content of steel Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E8 Tension testing of metallic materials Low Authorised to proceed Dec-18 Including Young's modulus
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM E9 Compression testing of metallic materials at room temperature Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ASTM G85 Modified salt spray (fog) testing Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom EN 10247 Micrographic examination of the non-metallic inclusion content of steels using standard pictures Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom EN 10276 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron Low Authorised to proceed Dec-18
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Authorised to proceed Dec-18
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Authorised to proceed Dec-18
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Authorised to proceed Dec-18
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Authorised to proceed Dec-18No PTP participation before 2016!
They must participate in 2017 for kit 5-1 or they will be disqualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid
medium by measurement of loss in mass (Huey test)Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 3651-2Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in
media containing sulfuric acidLow Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 3887 Steels - Determination of depth of decarburization Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 3907 Hardmetals - Determination of total carbon content - Gravimetric method Authorised to proceed Dec-18
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified HRB and HRC
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 671 Steel and cast iron - Determination of sulphur content - Combustion titrimetric method Authorised to proceed Dec-18
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 6892Metallic materials - Tensile testing - Part 1: Method of test at room temperature / Part 2: Method of test at elevated temperature / Part 3: Method of test at low
temperatureLow Qualified Room temperature only
260077 KEIGHLEY LABORATORY LIMITED Keighley United Kingdom ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
298996 LABORATOIRE D'ESSAIS FEUX AERONAUTIQUES - LEFAE Chaponost France AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Authorised to proceed Dec-18 Film, composite, composants électriques
298996 LABORATOIRE D'ESSAIS FEUX AERONAUTIQUES - LEFAE Chaponost France AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Authorised to proceed Dec-18 Film, composite, composants électriques
298996 LABORATOIRE D'ESSAIS FEUX AERONAUTIQUES - LEFAE Chaponost France AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Authorised to proceed Dec-18 Film, composite, composants électriques
298996 LABORATOIRE D'ESSAIS FEUX AERONAUTIQUES - LEFAE Chaponost France AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Authorised to proceed Dec-18 Cables
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France AITM 1-0070 Surface roughness measurements using surface stylus methods Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France AITM 5-0003 Determination of the absence of attack by stress corrosion of a liquid cleaning agent Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM E340 Macroetching metals and alloys Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM E384 Microindentation hardness of materials Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM E407 Microetching metals and alloys Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM E45 Determining the inclusion content of steel Low QualifiedAccording to NF A04-106
All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM E8 Tension testing of metallic materials Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM F1110 Sandwich corrosion test Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM F2111-A Standard practice for measuring intergranular attack or end grain pitting on metals caused by aircraft chemical processes Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM F483 Standard practice for total immersion corrosion test for aircraft maintenance chemicals Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM F519 Mechanical hydrogen embrittlement evaluation of plating/coating processes and service environments Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified Also according to QVA-Z10-59-93
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France EN 2716 (Pren) Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products - AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France EN 2717 (Pren) Inactive for new design Determination of susceptibility to intergranular corrosion - Wrought aluminium alloy products in AL-P5XXX- series with a magnesium content > or= 3,5% Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France EN 2832 Hydrogen embrittlement of steel - Notched specimen test Low QualifiedAccording as well to ASTM F519
All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low QualifiedAll metallic material
Alliages biphases alpha - beta - Titane
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 17639 Destructive tests on welds in metallic materials - Macroscopic and microscopic examination of welds Low QualifiedAll metallic material
Also qualified regarding ISO 24394 Chapter 8.5
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 2178 Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid
medium by measurement of loss in mass (Huey test)Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 3887 Steels - Determination of depth of decarburization Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 4288 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture Low Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 6506 (ASTM E10) Brinell hardness test Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 6507 (ASTM E92) Vickers hardness test Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 6892Metallic materials - Tensile testing - Part 1: Method of test at room temperature / Part 2: Method of test at elevated temperature / Part 3: Method of test at low
temperatureLow Qualified
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France Z_mechanical tests Various mechanical tests QualifiedAccording to NF A03-402 and NF A89-208
All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified All metallic material
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France Z_Other Other test - Specify in Remark QualifiedSwaging resistance test and Debonding test according to ADET 0033,
ADET 0173, ADET 0191, AIPS 03-03-012 and AIPS 01-02-019
296665 LABORATOIRE ECCI SERRES CASTET CEDEX France Z_Spectro. OES Spectrometry: optical emission (OES) QualifiedAccording to NF A07-001
All metallic material
310669 LABORATORY TESTING INC HATFIELD USA AMS 2315 Determination of delta ferrite content Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E1019Standard Test Method for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion
TechniquesLow Authorised to proceed Dec-18
310669 LABORATORY TESTING INC HATFIELD USA ASTM E1086 Analysis of austenitic stainless steel by spark atomic emission spectrometry Low Authorised to proceed Dec-18
310669 LABORATORY TESTING INC HATFIELD USA ASTM E112 Determining average grain size Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Authorised to proceed Dec-18
Page 25 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
310669 LABORATORY TESTING INC HATFIELD USA ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E34 Chemical analysis of aluminum and aluminum-base alloys Low Authorised to proceed Dec-18
310669 LABORATORY TESTING INC HATFIELD USA ASTM E340 Macroetching metals and alloys Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E384 Microindentation hardness of materials Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E407 Microetching metals and alloys Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E415 Analysis of carbon and low-alloy steel by spark atomic emission spectrometry Low Authorised to proceed Dec-18
310669 LABORATORY TESTING INC HATFIELD USA ASTM E45 Determining the inclusion content of steel Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E53 Determination of copper in unalloyed copper by gravimetry Low Authorised to proceed Dec-18
310669 LABORATORY TESTING INC HATFIELD USA ASTM E8 Tension testing of metallic materials Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM E9 Compression testing of metallic materials at room temperature Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM G66 Visual assessment of exfoliation corrosion susceptibility of 5XXX series aluminium alloys (ASSET test) Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ASTM G67 Determining the susceptibility to intergranular corrosion of 5XXX series aluminium alloys by mass loss after exposure to nitric acid (NAMLT test) Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA EN 2002-2 Tensile testing at elevated temperature Low Authorised to proceed Dec-18
310669 LABORATORY TESTING INC HATFIELD USA ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA NASM 1312-06 Fastener test methods - Method 6: Hardness Low Qualified
310669 LABORATORY TESTING INC HATFIELD USA Z_ICP-MS Inductively coupled plasma mass spectroscopy (ICP-MS) Authorised to proceed Dec-18
According to ASTM E2823 - Standard Test Method for Analysis of Nickel
Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-
Based)
310669 LABORATORY TESTING INC HATFIELD USA Z_Spectro. OES Spectrometry: optical emission (OES) Authorised to proceed Dec-18 According to ASTM E404, ASTM E607, ASTM E634
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified All materials of aircraft interiors
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified Plastic lenses
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High QualifiedQCS 150915
Side wall panels, seat shell panels, etc..
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High QualifiedQCS 150973
All materials of aircraft interiors
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland AITM 2-0009 Fire resistance of aircraft seat cushion utilizing a high density open flame High Authorised to proceed Dec-18Seat cushions
QCS Pending
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High Qualified
QCS151459
All materials of aircraft interiors
Based in acceptable technical assessment 09/11/2012
Technical Qualification to be completed.
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 10361 Textile floor coverings – Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 105-B02 Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 105-E01 Textiles - Tests for colour fastness - Part E01: Colour fastness to water Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 12945-2 Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 13934-1 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method Low Qualified
Qualification granted by grandfathering based in historical performane of
test method and coverage of test method in laboratory ISO17025
accreditation scope.
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 13935-1 Textiles - Seam tensile properties of fabrics and made-up textile articles - Part 1: Determination of maximum force to seam rupture using the strip method Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 13937-2 Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (single tear method) Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 5084 Textiles - Determination of thickness of textiles and textile product Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland ISO 8543 Textile floor coverings - Methods for determination of mass Low Qualified
176634 LANTAL TEXTILES AG LANGENTHAL Switzerland Z_Other Other test - Specify in Remark Qualified Thickness - ISO1765
314665 LUVAK, INC Boylston USA ASTM E1019Standard Test Method for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion
TechniquesLow Authorised to proceed Sep-18
314665 LUVAK, INC Boylston USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Authorised to proceed Sep-18 Titanium
314665 LUVAK, INC Boylston USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Authorised to proceed Sep-18 Titanium
314665 LUVAK, INC Boylston USA ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Authorised to proceed Sep-18 Titanium
314665 LUVAK, INC Boylston USA ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Authorised to proceed Sep-18 Titanium
314665 LUVAK, INC Boylston USA Z_Other Other test - Specify in Remark Authorised to proceed Sep-18
Determination of Various Elements by Direct Current Plasma Atomic
Emission Spectrometry according to ASTM E1097.
Iron, Nickel, Copper, Aluminum, Magnesium, Cobalt
314665 LUVAK, INC Boylston USA Z_Other Other test - Specify in Remark Authorised to proceed Sep-18Hydrogen Analysis by vacuum hot extraction according to ASTM E146.
Titanium, Zirconium, Steel
300088 MAXXAM ANALYTICS Mississauga Canada AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Disqualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 1-0022 Wettability test Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 1-0024 Determination of the completeness of cure of organic coatings Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 3-0029 Determination of iron (III) as reactive compound in acidic surface treatment baths Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France AITM 3-0038 Determination of non-volatile-residue Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ASTM D1125 Standard Test Methods for Electrical Conductivity and Resistivity of Water Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ASTM D1293 Standard Test Methods for pH of Water Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France EN 2832 Hydrogen embrittlement of steel - Notched specimen test Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France EN 3665 Paints and varnishes - Filiform corrosion resistance test on aluminium alloys Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 2106 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 2143 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 4287 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters Low Qualified
275531.1 MECAPROTEC INDUSTRIES MURET France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM A262 Standard practices for detecting susceptibility to intergranular attack in austenitic stainless steels Low Qualified
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E112 Determining average grain size Low Qualified Fe, Al, Cu, Ni, Co, Ti base materials
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified Fe, Al, Cu, Ni, Co, Ti base materials
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Authorised to proceed Dec-18
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Authorised to proceed Dec-18
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Qualified
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E21 Standard test methods for elevated temperature tension tests of metallic materials Low Qualified Ni/Ti base materials
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified Fe, Al, Cu, Ni, Co, Ti base materials
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E340 Macroetching metals and alloys Low Qualified Fe, Al, Cu, Ni, Co, Ti base materials
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E384 Microindentation hardness of materials Low Qualified Fe, Al, Cu, Ni, Co, Ti base materials
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E407 Microetching metals and alloys Low Qualified All
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E45 Determining the inclusion content of steel Low Qualified wrought steel
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM E8 Tension testing of metallic materials Low QualifiedFe, Al, Cu, Ni, Co, Ti base materials
Without Young's Modulus
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ASTM F519 Mechanical hydrogen embrittlement evaluation of plating/coating processes and service environments Low Authorised to proceed Dec-18 All
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
Fe/Ni base
Only according to ASTM E8 / ASTM B557
Without Young's Modulus
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Authorised to proceed Dec-18 Fe/Ni base
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified Fe/Ni base
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ISO 6506 (ASTM E10) Brinell hardness test Low QualifiedFe, Al, Cu, Ni, Co, Ti base materials
Only according to ASTM E10
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China ISO 6508 (ASTM E18) Rockwell hardness test Low QualifiedFe, Al, Cu, Ni, Co, Ti base materials
Only according to ASTM E18 (HRC only)
Page 26 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China Z_Combustion Analysis by combustion Qualified Cast/steel, Ni, Co, Ti
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China Z_IGF Inert gas fusion Authorised to proceed Dec-18 Ti, Steel, Ni, Co
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified Fe, Al, Cu, Ni, Co, Ti base materials
302737 METAL IMPROVEMENT COMPANY - IMR TEST LAB SUZHOU Suzhou Jiangsu China Z_Spectro. OES Spectrometry: optical emission (OES) Qualified Fe, Al, Cu, Ni, Co, Ti base materials
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM B769 Shear testing of aluminium alloys Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E112 Determining average grain size Low Authorised to proceed Dec-18
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E340 Macroetching metals and alloys Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E384 Microindentation hardness of materials Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E407 Microetching metals and alloys Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E45 Determining the inclusion content of steel Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E8 Tension testing of metallic materials Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM E9 Compression testing of metallic materials at room temperature Low Authorised to proceed Dec-18
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ASTM G85 Modified salt spray (fog) testing Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA EN 2002-2 Tensile testing at elevated temperature Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA EN 2002-6 Metallic materials: Bend testing Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
295788 METCUT RESEARCH ASSOCIATES INC Cincinnati USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified HRC only
267019 MISTRAS Group S.A. - Etablissement SOLSI-TEC ROSSELANGE France AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS120007
267019 MISTRAS Group S.A. - Etablissement SOLSI-TEC ROSSELANGE France AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified Composites
267019 MISTRAS Group S.A. - Etablissement SOLSI-TEC ROSSELANGE France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS111419 for A1 type
267019 MISTRAS Group S.A. - Etablissement SOLSI-TEC ROSSELANGE France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified QCS126577 for A2 type
267019 MISTRAS Group S.A. - Etablissement SOLSI-TEC ROSSELANGE France AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified Composites
267019 MISTRAS Group S.A. - Etablissement SOLSI-TEC ROSSELANGE France AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High QualifiedComposites
QCS111309
267019 MISTRAS Group S.A. - Etablissement SOLSI-TEC ROSSELANGE France AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS120008
310655 MPI - MECANIQUE PRECISION ISSOIRIENNE SAINT REMY DE CHARGNAT France ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High Authorised to proceed Dec-18 Pending QCS
295204 NATIONAL COMPOSITES CENTRE BRISTOL United Kingdom AIPS/AIPI 03-02-019 Manufacture of monolithic parts with thermoset prepreg materials High Qualified
QUALIFICATION ONLY FOR MANUFACTURE OF MONOLITHIC
CARBON FIBRE TEST ELEMENTS AND COUPONS TO SUPPORT
THE A350 XWB PROGRAM
296664 RESCOLL Pessac PESSAC CEDEX France AIPS/AIPI 01-02-005 Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials Low Qualified QCS 161052
296664 RESCOLL Pessac PESSAC CEDEX France AIPS/AIPI 03-07-002 Machining of fibre reinforced plastic (FRP) components High Qualified QCS 161052
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0003 Determination of the glass transition temperatures (DMA) High QualifiedQCS 131029
Restricted to TA Instruments DMA Q2980 test equipment
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High QualifiedComposite
QCS131338
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified Composite
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified
Composite
Restricted to AITM 1-0008 A2
QCS126603
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High QualifiedComposite
QCS131335
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified
Qualified Test Chamber ID: INFLA 1001
Composite (A)
Honeycomb (G)
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified
Qualified Test Chamber ID: INFLA 1001
Composite (A)
Honeycomb (G)
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified
Qualified Test Chamber ID: INFLA 1001
Composite (A)
Honeycomb (G)
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Qualified Qualified Test Chamber ID: INFLA 1001
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High QualifiedQualified Test Chamber ID: OSU 1001
QCS151103
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High QualifiedQualified Test Chamber ID: CHFUM 1001
QCS151104
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Dec-18
Pending QCS
Authorised Test Chamber ID: CHFUM 1001
Autorisation granted based in satisfactory technical test witnessing.
Autorisation condition to completion of PTP.
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Qualified Qualified Test Chamber ID: INFLA 1001
296664 RESCOLL Pessac PESSAC CEDEX France AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0001 (EN 6040) Analysis of thermoset systems by high performance liquid chromatography (HPLC) Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High QualifiedQCS101065
Composite
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0004 (EN 6043) Determination of gel time and viscosity Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High QualifiedQualified Test Chamber ID: CHFUM 1001, ANGA 1001, POMPE 1003.
QCSC151490
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Qualified QCS101065
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0017 Gas chromatography (GC) Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0027 Determination of the melting behaviour and the extent of cristallinity of semi-cristalline materials by differential scanning calorimetry (DSC) High Authorised to proceed Dec-18 Pending QCS
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0036 Determination of hydrogen ions in surface treatment baths Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France AITM 3-0037 Determination of phosphoric and sulphuric acid in anodizing electrolytes Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ASTM C363 Node tensile strength of honeycomb core materials Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ASTM C365 Flatwise compressive properties of sandwich cores Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ASTM C393 Core shear properties of sandwich constructions by beam flexure Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ASTM D1781 Climbing drum peel for adhesives Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified Composite
296664 RESCOLL Pessac PESSAC CEDEX France EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified Composite
296664 RESCOLL Pessac PESSAC CEDEX France EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified Composite
296664 RESCOLL Pessac PESSAC CEDEX France EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Authorised to proceed Dec-18 Also according to IGC 04.26.230
296664 RESCOLL Pessac PESSAC CEDEX France EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified Composite
296664 RESCOLL Pessac PESSAC CEDEX France EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Authorised to proceed Dec-18
296664 RESCOLL Pessac PESSAC CEDEX France EN 827 Adhesives - Determination of conventional solids content and constant mass solids content Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 11357-2 Plastics - Differential scanning calorimetry (DSC) -Part 2: Determination of glass transition Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 11357-3 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 11358 Plastics - Thermogravimetry (TG) of polymers Low Qualified Composite
296664 RESCOLL Pessac PESSAC CEDEX France ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low QualifiedComposite (A)
Plastics
296664 RESCOLL Pessac PESSAC CEDEX France ISO 14125 Fiber reinforced plastic composites - Determination of flexural properties Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 178 Plastics – Determination of flexural properties Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 1923 Cellular plastics and rubbers - Determination of linear dimensions Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 4578 Adhesives - Determination of peel resistance of high-strength adhesive bonds - Floating roller method Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 4587 Adhesive - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies Low Qualified
Page 27 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
296664 RESCOLL Pessac PESSAC CEDEX France ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified Composite
296664 RESCOLL Pessac PESSAC CEDEX France ISO 604 Plastics - Determination of compressive properties Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France ISO 844 Rigid cellular plastics - Determination of compression properties Low Qualified
296664 RESCOLL Pessac PESSAC CEDEX France Z_mechanical tests Various mechanical tests QualifiedASTM D6641 - Compressive properties of polymer matrix composite
materials using a combined loading compression (CLC) test fixture
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 131008
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified A1 – QCS126581
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High Qualified A2 - QCS126582
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Authorised to proceed Dec-18
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS140657 (according issue 4)
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Qualified QCS101065
294826 RESCOLL Rochefort ROCHEFORT CEDEX France AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Qualified QCS101065
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ASTM E112 Determining average grain size Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ASTM E340 Macroetching metals and alloys Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ASTM E384 Microindentation hardness of materials Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ASTM E407 Microetching metals and alloys Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ASTM E45 Determining the inclusion content of steel Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ASTM E643 Standard test method for ball punch deformation of metallic sheet material Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified Also according to the IGC 04-26-270
294826 RESCOLL Rochefort ROCHEFORT CEDEX France EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified Method A
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 4624 Paints and varnishes - Pull-off test for adhesion Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 604 Plastics - Determination of compressive properties Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 6892Metallic materials - Tensile testing - Part 1: Method of test at room temperature / Part 2: Method of test at elevated temperature / Part 3: Method of test at low
temperatureLow Qualified Part 1
294826 RESCOLL Rochefort ROCHEFORT CEDEX France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Authorised to proceed Dec-18
294826 RESCOLL Rochefort ROCHEFORT CEDEX France Z_Other Other test - Specify in Remark QualifiedInstallation by staking according to AIPS03-03-012, ADET 0191, ADET
0033 and IGC 04-62-156
294826 RESCOLL Rochefort ROCHEFORT CEDEX France Z_Other Other test - Specify in Remark QualifiedIGC 04-26-406: densification resins insert extraction test perpendicular
tensile test
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Authorised to proceed Dec-18
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ISO 11341 Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation Low Qualified Only Method 1 Cycle A
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified Method A - Immersion method
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ISO 1518 Paints and varnishes - Scratch test Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ISO 4628-2Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2:
Assessment of degree of blisteringLow Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ISO 4892-2 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps Low Qualified
197093 SGS FRANCE TRANSPORTATION - LABORATOIRE DE CESTAS CESTAS France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Qualified
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High Qualified QCS170970 (A)
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Qualified QCS170971 (A)
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0009 Fire resistance of aircraft seat cushion utilizing a high density open flame High Authorised to proceed Dec-18 QCS Pending
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Qualified
284559 SKANDIA INC DAVIS JUNCTION USA AITM 2-0053 Determination of flammability and flame propagation of thermal / acoustic insulation materials - Radiant panel test High Authorised to proceed Dec-18 QCS Pending
284559 SKANDIA INC DAVIS JUNCTION USA AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High Qualified QCS170972 (A)
199545 SOPEMEA SAS VELIZY-VILLACOUBLAY CEDEX France Z_comb. Clim and mech. Combined climatic and mechanic testing Qualified Accrédité COFRAC ISO 17025 sous convention N°1-0090
199545 SOPEMEA SAS VELIZY-VILLACOUBLAY CEDEX France Z_Drop Drop test Qualified Accrédité COFRAC ISO 17025 sous convention N°1-0090
199545 SOPEMEA SAS VELIZY-VILLACOUBLAY CEDEX France Z_Modal analysis Modal analysis Qualified Accrédité COFRAC ISO 17025 sous convention N°1-0090
199545 SOPEMEA SAS VELIZY-VILLACOUBLAY CEDEX France Z_Pression Pression test Qualified Accrédité COFRAC ISO 17025 sous convention N°1-0090
199545 SOPEMEA SAS VELIZY-VILLACOUBLAY CEDEX France Z_Random vibrations Random vibrations test Qualified Accrédité COFRAC ISO 17025 sous convention N°1-0090
199545 SOPEMEA SAS VELIZY-VILLACOUBLAY CEDEX France Z_Seism Seism test Qualified Accrédité COFRAC ISO 17025 sous convention N°1-0090
199545 SOPEMEA SAS VELIZY-VILLACOUBLAY CEDEX France Z_Shock Shock test Qualified Accrédité COFRAC ISO 17025 sous convention N°1-0090
199545 SOPEMEA SAS VELIZY-VILLACOUBLAY CEDEX France Z_Sine vibrations Sine vibrations test Qualified Accrédité COFRAC ISO 17025 sous convention N°1-0090
298999 SYPAC LUCE France AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
298999 SYPAC LUCE France AITM 3-0032 Analysis of metals in galvanic bathes by ICP-spectroscopy Low Qualified
298999 SYPAC LUCE France AITM 3-0034 Combined determination of free hydroxide and aluminium in alkaline surface treatment baths Low Qualified
298999 SYPAC LUCE France AITM 3-0035 Determination of chloride contaminations in surface treatment baths Low Qualified
298999 SYPAC LUCE France ASTM D4060 Abrasion resistance of organic coatings by the Taber abraser Low Qualified
298999 SYPAC LUCE France ASTM E384 Microindentation hardness of materials Low Qualified
298999 SYPAC LUCE France ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified
298999 SYPAC LUCE France ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
288321 TECHNACOL TARBES France AITM 1-0020 Bending at low temperature Low Qualified QCS126549
288321 TECHNACOL TARBES France AITM 2-0014 Determination of the effect of thermal exposure Low Qualified QCS126549
288321 TECHNACOL TARBES France ISO 1518 Paints and varnishes - Scratch test Low Qualified QCS126549
288321 TECHNACOL TARBES France ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified QCS126549
288321 TECHNACOL TARBES France ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
QCS126549
Paint
Page 28 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
288321 TECHNACOL TARBES France ISO 25178-601 Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments Low Qualified QCS126549
288321 TECHNACOL TARBES France ISO 2808 Paints and varnishes - Determination of film thickness Low QualifiedQCS126549
Film
288321 TECHNACOL TARBES France ISO 2812-1 Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water Low Qualified
288321 TECHNACOL TARBES France ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
288321 TECHNACOL TARBES France ISO 2813 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° Low Qualified Adhesive film - Metallic / composites / honeycomb parts
288321 TECHNACOL TARBES France ISO 4288 Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture Low Qualified Coating
288321 TECHNACOL TARBES France ISO 4624 Paints and varnishes - Pull-off test for adhesion Low QualifiedQCS126549
Paint
288321 TECHNACOL TARBES France ISO 527-3 Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets Low QualifiedQCS126549
Adhesive film - Metallic / composites / honeycomb parts
288321 TECHNACOL TARBES France ISO 5436-1 Geometrical Product Specifications (GPS) - Surface texture - Profile method - Measurement standards - Part 1: Material measures Low Qualified QCS126549
288321 TECHNACOL TARBES France ISO 6270-2 Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres Low QualifiedQCS126549
Adhesive film - Metallic / composites / honeycomb parts
288321 TECHNACOL TARBES France ISO 8510-2 Adhesives - Peel test for a flexible-bonded-to-rigid test specimen assembly - Part 2: 180° peel Low QualifiedQCS126549
Adhesive film - Metallic / composites / honeycomb parts
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Authorised to proceed Dec-18 Test Chamber qualified: TC-SB-81
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Authorised to proceed Dec-18 Test Chamber qualified: TC-SB-81
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Authorised to proceed Dec-18 Test Chamber qualified: TC-SB-81
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Authorised to proceed Dec-18 Test Chamber qualified: TC-SB-81
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High Authorised to proceed Dec-18Test Chamber qualified: TC-SB-108
QCS170195
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Authorised to proceed Dec-18Test Chamber qualified: TC-SB-170
QCS Pending
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Dec-18Test Chamber qualified: TC-SB-170
QCS Pending
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0009 Fire resistance of aircraft seat cushion utilizing a high density open flame High Authorised to proceed Dec-18Test Chamber qualified: TC-SB-89
QCS Pending
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0010 Fire resistance of aircraft cargo component lining materials utilizing a high density open flame High Authorised to proceed Dec-18Test Chamber qualified: TC-SB-176
QCS Pending
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Authorised to proceed Dec-18 Test Chamber qualified: TC-SB-81
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0053 Determination of flammability and flame propagation of thermal / acoustic insulation materials - Radiant panel test High Authorised to proceed Dec-18Test Chamber qualified: TC-SB-39
QCS Pending
312862 Test Center of Civil Aviation Administration of China (CAAC) Chengdu China AITM 2-0056 Determination of burn through resistance characteristics of thermal / acoustic insulation materials High Authorised to proceed Dec-18Test Chamber qualified: TC-SB-178
QCS Pending
316971 TESTCORP (Lake Forest) Lake Forest USA AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified Qualified Test Chamber: S/N: 018 & 019
316971 TESTCORP (Lake Forest) Lake Forest USA AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High Qualified
QCS 180023 (A)
Qualified Test Chamber ID: 1328
316971 TESTCORP (Lake Forest) Lake Forest USA AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High QualifiedQCS 180024 (A)
Qualified Test Chamber ID: 61036
316971 TESTCORP (Lake Forest) Lake Forest USA AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High QualifiedQCS 180026 (A)
Qualified Test Chamber ID: E05006 Y01001
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Qualified
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High Qualified QCS:150918
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High Qualified QCS150975
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Dec-17Authorisation granted based in acceptable technical test witnessing with
no major technical finding during onsite audit of Nov-2013 by ESMB2
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 2-0038 Flammability of non-metallic heat shrinkable tubings - Small burner test, 60° - Determination of the resistance of non-metallic heat shrinkable tubings to flame at 60° Low Qualified
299013 TESTCORP (Mission Viejo) Mission Viejo, CA USA AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High Authorised to proceed Dec-17Authorisation granted based in acceptable technical test witnessing with
no major technical finding during onsite audit of Nov-2013 by ESMB2
248790 TFI - Institut für Bodensysteme an der RWTH Aachen e.V. Aachen Germany ISO 9352 Plastics - Determination of resistance to wear by abrasive wheels Low Qualified LIMITED FOR CARPETS
248790 TFI - Institut für Bodensysteme an der RWTH Aachen e.V. Aachen Germany Z_Other Other test - Specify in Remark QualifiedEN 986 Dimmensional Change
LIMITED FOR CARPETS
248790 TFI - Institut für Bodensysteme an der RWTH Aachen e.V. Aachen Germany Z_Other Other test - Specify in Remark QualifiedEN 985 "castor chair test".
LIMITED FOR CARPETS
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0002 Resistance of Materials when tested according to the 12 s or 60 s Vertical Bunsen Burner Test Low Qualified Various, Honeycomb, Solid, Textile
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0003 Resistance of Materials when tested according to the 15s horizontal bunsen burner test Low Qualified Various, Honeycomb, Solid, Textile
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0004 Flammability of non-metallic materials - Small burner test, 45° - Determination of the resistance of material to flame and glow propagation, and to flame penetration Low Qualified Honeycomb Composites
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0005 Flammability of non-metallic materials - Small burner test, 60° - Determination of the resistance of electrical wire insulation materials to flame at 60° Low Qualified Wire and Cable
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0006 Determination of heat release and heat release rate of aircraft materials High QualifiedQCS 150890
Various
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0007 Determination of the specific optical smoke density of component parts or sub-assemblies of aircraft interior High QualifiedQCS150967
Various
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0008 Determination of the optical smoke density of electrical and non-electrical cable High Authorised to proceed Dec-18 Wire and Cable
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0009 Fire resistance of aircraft seat cushion utilizing a high density open flame High Authorised to proceed Dec-18Seat Cushions
QCS Pending
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0010 Fire resistance of aircraft cargo component lining materials utilizing a high density open flame High Authorised to proceed Dec-18Composites
QCS Pending
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 2-0053 Determination of flammability and flame propagation of thermal / acoustic insulation materials - Radiant panel test High Authorised to proceed Dec-18
Composites
Insulation, Foam etc.
QCS Pending
306784 THE GOVMARK Organization Inc. Farmingdale USA AITM 3-0005 Determination of specific gas components of smoke generated by aircraft interior materials High Authorised to proceed Dec-18 QCS Pending
276249 TITANIA El Puerto de Santa María Spain AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 1-0003 Determination of the glass transition temperatures (DMA) High Qualified QCS 131066
276249 TITANIA El Puerto de Santa María Spain AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS 140131
276249 TITANIA El Puerto de Santa María Spain AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS 140496
276249 TITANIA El Puerto de Santa María Spain AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified Also according to I+D-E 352
276249 TITANIA El Puerto de Santa María Spain AITM 1-0024 Determination of the completeness of cure of organic coatings Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 1-0030 Sealants - Determination of lap shear strength Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 1-0032 Determination of non hardening characteristic of sealant Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 1-0033 Sealants: Determination of the curing rate of sealing materials Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 1-0036 Sealants - Determination of assembly time Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS 130240 - Valid for the Issue 4 of the norm
276249 TITANIA El Puerto de Santa María Spain AITM 1-0070 Surface roughness measurements using surface stylus methods Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 2-0013 Determination of sealant adhesion by linear debonding test High Qualified QCS 130754
276249 TITANIA El Puerto de Santa María Spain AITM 2-0027 Determination of colour differences Low Qualified Also ccording to ISO7724 UNE 48073
276249 TITANIA El Puerto de Santa María Spain AITM 2-0033 Sealants - Determination of slump Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 2-0034 Sealants - Determination of tack-free time of sealing materials Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 2-0061 Water pick up test-method to determine the impregnation level of prepeg materials Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Qualified QCS pending
276249 TITANIA El Puerto de Santa María Spain AITM 3-0003 (EN 6042) Analysis of organic compounds by infrared spectroscopy (IR) Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 3-0004 (EN 6043) Determination of gel time and viscosity Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Qualified QCS pending
276249 TITANIA El Puerto de Santa María Spain AITM 3-0025 Determination of solid content Low Qualified Sealants
276249 TITANIA El Puerto de Santa María Spain AITM 3-0030 Titration of sulphuric and tartaric acid in anodizing electrolytes Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 4-0003 Test method for determining the pore content of fibre reinforced plastics using automatic image analysis High Authorised to proceed Dec-18 QCS Pending
276249 TITANIA El Puerto de Santa María Spain AITM 4-0005 Macroscopic and microscopic examination of fiber reinforced plastics Low Qualified Risk assessement Ref X029ME1526459
276249 TITANIA El Puerto de Santa María Spain AITM 5-0009 Determination of resistance to bond line corrosion Low Qualified
276249 TITANIA El Puerto de Santa María Spain AITM 7-0003 Sealants - Determination of application time of sealing materials Low Qualified
276249 TITANIA El Puerto de Santa María Spain AMS 2315 Determination of delta ferrite content Low Qualified Also according to LC-PE-063
276249 TITANIA El Puerto de Santa María Spain ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified
276249 TITANIA El Puerto de Santa María Spain ASTM E112 Determining average grain size Low Qualified
Page 29 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
276249 TITANIA El Puerto de Santa María Spain ASTM E2602 Assignment of the glass transition temperature by modulated temperature differential scanning calorimetry (DSC) High Qualified QCS Pending
276249 TITANIA El Puerto de Santa María Spain ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified Also according to LC-PE-021
276249 TITANIA El Puerto de Santa María Spain ASTM E340 Macroetching metals and alloys Low Qualified
276249 TITANIA El Puerto de Santa María Spain ASTM E384 Microindentation hardness of materials Low Qualified
276249 TITANIA El Puerto de Santa María Spain ASTM E407 Microetching metals and alloys Low Qualified
276249 TITANIA El Puerto de Santa María Spain ASTM F1110 Sandwich corrosion test Low Qualified
276249 TITANIA El Puerto de Santa María Spain ASTM F483 Standard practice for total immersion corrosion test for aircraft maintenance chemicals Low Qualified
276249 TITANIA El Puerto de Santa María Spain ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified Also according as well to LC-PE-022
276249 TITANIA El Puerto de Santa María Spain ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2002-6 Metallic materials: Bend testing Low Qualified Also According to ASTM E290 and UNE-EN 910
276249 TITANIA El Puerto de Santa María Spain EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2560 Carbon fibre preimpregnates - Determination of the resin flow Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2564 Carbon fibre laminates - Determination of the fibre, resin and void contents Low Qualified Also according to ABT 1-0018
276249 TITANIA El Puerto de Santa María Spain EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2823 (prEN) Fibre reinforced plastics - Determination of the effect of exposure to humid atmosphere on physical and mechanical characteristics Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 3665 Paints and varnishes - Filiform corrosion resistance test on aluminium alloys Low Qualified
276249 TITANIA El Puerto de Santa María Spain EN 542 Adhesives - Determination of density Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 1463 Metallic and oxide coatings - Measurement of coating thickness - Microscopical method Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 1518 Paints and varnishes - Scratch test Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 1519 Paints and varnishes - Bend test (cylindrical mandrel) Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2106 Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2143 Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2360 Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2409 Paints and varnishes - Cross-cut test Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2431 Paints and varnishes - Determination of flow time by use of flow cups Low Qualified Also according to ASTMD1200 ASTMD4212
276249 TITANIA El Puerto de Santa María Spain ISO 2555 Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield test method Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2781 Rubber, vulcanized or thermoplastic - Determination of density Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2808 Paints and varnishes - Determination of film thickness Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2811-1 Paints and varnishes - Determination of density - Part 1: Pyknometer method Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2812-2 Paints and varnishes - Determination of resistance to liquids - Part 2: Water immersion method Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 2813 Paints and varnishes - Determination of specular gloss of non-metallic paint films at 20°, 60° and 85° Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 3251 Paints, varnishes and plastics - Determination of non-volatile-matter content Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 4624 Paints and varnishes - Pull-off test for adhesion Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 6507 (ASTM E92) Vickers hardness test Low Qualified
276249 TITANIA El Puerto de Santa María Spain ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified Also according to UNE-EN ISO 6508-1 and ASTM E18
276249 TITANIA El Puerto de Santa María Spain ISO 7619-1 Rubber, vulcanized or thermoplastic - Determination of indentation hardness - Part 1: Durometer method (Shore hardness) Low Qualified Alsa according to ASTMD2240 UNE-EN ISO868
276249 TITANIA El Puerto de Santa María Spain ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
276249 TITANIA El Puerto de Santa María Spain NASM 1312-01 Fastener test methods - Method 1: Salt Spray Low Qualified Also according to ASTM B117 and UNE-EN ISO 9227
276249 TITANIA El Puerto de Santa María Spain NASM 1312-06 Fastener test methods - Method 6: Hardness Low QualifiedAlso according to UNE-EN ISO 6508-1 & ASTM E18 (Rockwell) / UNE-
EN ISO 6507-1 & ASTM E384 (Vickers)
276249 TITANIA El Puerto de Santa María Spain NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified Also according to ASTM B565, UNE 7246 and LC-PE-010
276249 TITANIA El Puerto de Santa María Spain NASM 1312-20 Fastener test methods - Method 20: Single shear Low Qualified
276249 TITANIA El Puerto de Santa María Spain NASM 1312-31 Fastener test methods - Method 31: Torque Low Qualified Also according to LC-PE-008
276249 TITANIA El Puerto de Santa María Spain Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified
276249 TITANIA El Puerto de Santa María Spain Z_Corrosion Corrosion Qualified According to AMS2700, ASTM A380, ASTM A967 and ISO 8075
276249 TITANIA El Puerto de Santa María Spain Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified According to LC-PE-021
276249 TITANIA El Puerto de Santa María Spain Z_Opt. metallo. Optical metallography Qualified Steel, Ti, Al
276249 TITANIA El Puerto de Santa María Spain Z_Spectro. OES Spectrometry: optical emission (OES) Qualified According to LC-PE-004
204579 TNO DEFENCE SECURITY AND SAFETY RIJSWIJK Netherlands AITM 1-0052 Determination of flightdeck penetration resistance High Authorised to proceed Dec-18 Pending QCS.
304849 TREO - Labor fur Umweltsimulation GmbH Hamburg Germany ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified
304849 TREO - Labor fur Umweltsimulation GmbH Hamburg Germany Z_Other Other test - Specify in Remark Qualified
ABD0100 / RTCA DO-160
Temperature, Altitude, Humidity, Crash safety, Fluid Susceptibility, EMC,
vibration.
Electronic Devices / Mechanical Parts, interior materials
205775 TÜV Rheinland Kraftfahrt GmbH Cologne / Helmond Germany CS25.561 / FAR25.561 / AS8049B / TSO39B Seats - Static Qualification Test Qualified STATIC Test conducted in Cologne Facility
205775 TÜV Rheinland Kraftfahrt GmbH Cologne / Helmond GermanyCS25.562/FAR25.562/AS8049B/AC25.562-
1B/TSO-C127Seats - Dynamic Test Qualified DYNAMIC Test conducted in Helmond, NL facility (TNO)
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Qualified QCS 120014
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 1-0006 (EN 6034) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode II - GIIc High Authorised to proceed Dec-18 QCS Pending
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 1-0010 (EN 6038) Fibre reinforced plastics - Determination of compression strength after impact High Qualified QCS 160015
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Qualified QCS120016 - Valid for the issue 4 of the norm
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 3-0002 Analysis of non metallic material (uncured) by differential scanning calorimetry (DSC) High Qualified QCS101065
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain AITM 3-0008 (EN 6064) Determination of the extent of cure by differential scanning calorimetry (DSC) High Qualified QCS101065
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain ISO 11358 Plastics - Thermogravimetry (TG) of polymers Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain ISO 15024 Fibre reinforced plastic composites - Determination of mode 1 interlaminar fracture toughness, G1c, for unidirectionally reinforced materials High Qualified QCS 130130
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain ISO 25217Adhesives - Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam
specimensHigh Qualified QCS 130140
260011 UDG - AMADE UNIVERSITAT DE GIRONA Girona Spain ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified
206959 VANCOUVER 2 TOULOUSE France AIPS/AIPI 01-02-005 Preparation of holes in fibre reinforced plastic (FRP) and hybrid materials Low Qualified ME1330208 grandfathering
206959 VANCOUVER 2 TOULOUSE France AIPS/AIPI 01-02-008 Torque tightening of screws, bolts and nuts High Qualified ME1330208 grandfathering
206959 VANCOUVER 2 TOULOUSE France AIPS/AIPI 01-02-017 General assembly and installation of fasteners High Qualified ME1330208 grandfathering
206959 VANCOUVER 2 TOULOUSE France AIPS/AIPI 01-02-022 Installation of parallel shank threaded fasteners High Qualified ME1330208 grandfathering
206959 VANCOUVER 2 TOULOUSE France AIPS/AIPI 03-07-002 Machining of fibre reinforced plastic (FRP) components High Qualified ME1330208 grandfathering
206959 VANCOUVER 2 TOULOUSE France AIPS/AIPI 05-05-004 Wet installation of fasteners High Qualified ME1330208 grandfathering
206959 VANCOUVER 2 TOULOUSE France AIPS/AIPI 06-01-004 Mechanical surface preparation of non-structural adherend prior to adhesive bonding Low Qualified ME1330208 grandfathering
206959 VANCOUVER 2 TOULOUSE France AIPS/AIPI 06-02-002 Non-structural adhesive bonding Low Qualified ME1330208 grandfathering
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Disqualified A & E Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Disqualified A & E Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified A & E Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM B117 Standard practice for operating salt spray (Fog) apparatus Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM B769 Shear testing of aluminium alloys Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E111 Young’s modulus, tangent modulus, and chord modulus High QualifiedSteels, Titanium, Aluminium, etc.
Grandfathering, historical qualification without QCS
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E112 Determining average grain size Low Qualified Steels, Titanium, Aluminium, etc.
Page 30 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E21 Standard test methods for elevated temperature tension tests of metallic materials Low Qualified
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E238 Pin-type bearing test of metallic materials High Authorised to proceed Dec-18Steels, Titanium, Aluminium, Inco, etc.
Grandfatheing, historical qualification without QCS
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E340 Macroetching metals and alloys Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E384 Microindentation hardness of materials Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High QualifiedSteels, Titanium, Aluminium, etc.
Grandfathering, historical qualification without QCS
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E407 Microetching metals and alloys Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E45 Determining the inclusion content of steel Low Authorised to proceed Dec-18 Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E647 Measurement of fatigue crack growth rates (da/dn) High Authorised to proceed Dec-18Steels, Titanium, Aluminium, etc.
Grandfathering - QCS pending
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E8 Tension testing of metallic materials Low Qualified
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM E9 Compression testing of metallic materials at room temperature Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM F519 Mechanical hydrogen embrittlement evaluation of plating/coating processes and service environments Low Qualified
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM G66 Visual assessment of exfoliation corrosion susceptibility of 5XXX series aluminium alloys (ASSET test) Low Qualified
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ASTM G85 Modified salt spray (fog) testing Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low QualifiedSteels, Titanium, Aluminium, etc.
Including Young's Modulus detemrination
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 2002-2 Tensile testing at elevated temperature Low QualifiedSteels, Titanium, Aluminium, etc.
Including Young's Modulus detemrination
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 2002-6 Metallic materials: Bend testing Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified A & E Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified A & E Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 2832 Hydrogen embrittlement of steel - Notched specimen test Low Qualified Steels
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified A & E Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 6072 Constant amplitude fatigue testing (HCF) High QualifiedQCS ST0147
Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom EN 6072 (machining) Fatigue test specimen machining (NADCAP test code O) QualifiedQCS ST0147
Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 4287 Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters Low Authorised to proceed Dec-18According to internal procedure WMTR/QTP/EM003
Measurement of Ra and Rz
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 4516 Metallic and other inorganic coatings - Vickers and Knoop microhardness tests Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 6506 (ASTM E10) Brinell hardness test Low Authorised to proceed Dec-18 Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 6507 (ASTM E92) Vickers hardness test Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 6508 (ASTM E18) Rockwell hardness test Low QualifiedSteels, Titanium, Aluminium, etc.
HRC and HRB
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom ISO 9227 (ASTM B117) Corrosion tests in artificial atmospheres - Salt spray tests Low Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom Z_Comp. spec. machining Composite specimen machining / cutting / tabbing Qualified A & E Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom Z_Comp. spec. prod. Composite specimen production Qualified A & E Various Composites
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom Z_Opt. metallo. Optical metallography Qualified Steels, Titanium, Aluminium, etc.
257831 WESTMORELAND MECHANICAL TESTING & RESEARCH LTD (UK) BANBURY United Kingdom Z_Spectro. OES Spectrometry: optical emission (OES) Authorised to proceed Dec-18Spark OES
Aluminium and Iron base only
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0002 (ISO 14129) Fibre reinforced plastics - Determination of in-plane shear properties (±45° tensile test) Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0005 (EN 6033) Fibre reinforced plastics - Determination of interlaminar fracture toughness energy - Mode I - G1c High Authorised to proceed Dec-18
Only for AITM Issue 2
QCS126270
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0007-A / B / C / D Fibre reinforced plastics - Determination of plain, open hole and filled hole tensile strength Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High QualifiedType A2 - QCS111415
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0008-A1 (<200kN) / A2 Fiber reinforced plastics - Determination of plain compression strength High QualifiedType A1 - QCS111415
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0008-B / C / D Fiber reinforced plastics - Determination of open hole or filled hole compression strength Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0009-1 / 2 Fibre reinforced plastics - Determination of bearing strength by either pin or bolt bearing configuration High Authorised to proceed Dec-18QCS 111308
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0018 Fibre reinforced plastics - Sandwich flexural test - Four-point bending Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0019 Determination of tensile lap shear strength of composite joints Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0025 Fiber reinforced plastics - Flatwise tensile test of composite sandwich panel Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0029 Fibre reinforced plastics - Determination of tensile strength of a tapered or stepped joint Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0040 Residual stress measurement for metallic plates Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0042 (ASTM E647) Determination of fatigue crack growth rates for aluminium clad sheet and clad plate up to 12 mm in constant-load-amplitude tests - K-increasing method High QualifiedQCS120508 - MT and CT specimens
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0043 (ASTM E561) Determination of crack resistance (R-Curve) for aluminium clad sheet and clad plate up to 12 mm for M(T) specimens High Authorised to proceed Dec-18QCS120510 - MT specimens
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0053 Carbon fibre reinforced plastics - Determination of fracture toughness energy of bonded joints - Mode I - G1c High Authorised to proceed Dec-18
Only for AITM Issue 2
QCS126271
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0064 Butt welding of aluminium alloys - Bend test Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0065 Fiber reinforced plastics - Determination of joint strength of mechanically fastened joints High Authorised to proceed Dec-18Pending TQ recovery and QCS
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 1-0066 Fibre reinforced plastics – Determination of pull-out / pull-through strength on riveted joints Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AITM 4-0002 Microstructural characterization of welded aluminium structures Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA AMS 2315 Determination of delta ferrite content Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM A604 (EN 2003-7) Macroetch testing of consumable electrode remelted steel bars and billets Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM B769 Shear testing of aluminium alloys Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM C633 Adhesion or cohesion strength of thermal spray coatings Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive / 209 Cherry Hill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM D1876 Peel resistance of adhesives (T-Peel test) Low Qualified 221 Westmoreland Drive
Page 31 de 32
ARP-ID Name of the Independent Lab Town Country Referential Test Label Complexity StatusExpiration Date (ATP only)
END OF MONTHRemark / QCS Reference / Limitation
Report ordered by Test Facility
Test Method
QUALIFIED OR AUTHORISED TO PROCEED COUPLES FOR INDEPENDENT TEST FACILITIES / SPECIMENS PRODUCTION & MACHINING FACILITIESAirbus Qualified Test Method List (QTML) External Report
In Accordance with AP5262 Issue A - Qualification Process of Couples <Test Method / Test Facility>
For any further information, please contact : [email protected]
Test Facility
Note: Red Couples are withdrawn
Publication date: July 5th, 2018
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E1019Standard Test Method for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion
TechniquesLow Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E1086 Analysis of austenitic stainless steel by spark atomic emission spectrometry Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E112 Determining average grain size Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E139 Creep, creep-rupture, and stress-rupture tests of metallic materials Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E1409 Determination of oxygen and nitrogen in titanium and titanium alloys by the inert gas fusion technique Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E1447 Determination of hydrogen in titanium and titanium alloys by inert gas fusion thermal conductivity / infrared detection method Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E1834 Analysis of nickel alloys by graphite furnace atomic absorption spectrometry Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E1941 Determination of carbon in refractory and reactive metals and their alloys by combustion analysis Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E209 Compression tests of metallic materials at elevated temperatures with conventional or rapid heating rates and strain rates Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E21 Standard test methods for elevated temperature tension tests of metallic materials Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E2371 Analysis of Titanium and Titanium alloys by atomic emission plasma spectrometry Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E2594 Analysis of nickel alloys by inductively coupled plasma atomic emission spectrometry (performance-based method) Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E290 Bend testing of material for ductility Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive / 209 Cherry Hill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E3 Standard guide for preparation of metallographic specimens Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E340 Macroetching metals and alloys Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E384 Microindentation hardness of materials Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E399 Linear-elastic plane-strain fracture toughness KIc of metallic materials High QualifiedPending TQ recovery and QCS
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E407 Microetching metals and alloys Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E45 Determining the inclusion content of steel Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E561 R-curve determination High Authorised to proceed Dec-18QCS120510
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E647 Measurement of fatigue crack growth rates (da/dn) High QualifiedQCS120508
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E8 Tension testing of metallic materials Low Authorised to proceed Dec-18 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM E9 Compression testing of metallic materials at room temperature Low Authorised to proceed Dec-18 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM G110 Evaluating intergranular corrosion resistance of heat treatable aluminium alloys by immersion in sodium chloride + hydrogen peroxide solution Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM G112 Standard guide for conducting exfoliation corrosion tests in aluminium alloys Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM G34 Exfoliation corrosion susceptibility in 2XXX and 7XXX series aluminum alloys (EXCO Test) Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM G66 Visual assessment of exfoliation corrosion susceptibility of 5XXX series aluminium alloys (ASSET test) Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM G67 Determining the susceptibility to intergranular corrosion of 5XXX series aluminium alloys by mass loss after exposure to nitric acid (NAMLT test) Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ASTM G85 Modified salt spray (fog) testing Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 10276 Chemical analysis of ferrous materials - Determination of oxygen in steel and iron Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2002-1 (ASTM B557) Tensile testing at ambient temperature Low Authorised to proceed Dec-18 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2002-2 Tensile testing at elevated temperature Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2002-5 Test methods for metallic materials - Part 5: Uninterrupted creep and stress-rupture testing Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2002-6 Metallic materials: Bend testing Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2003-10 Titanium and titanium alloys - Part 10: Sampling for determination of hydrogen content Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2003-9 Titanium and titanium alloys - Part 9: Determination of surface contamination (method A: Micrographic examination / Method B: Hardness testing) Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2243-1 Structural adhesives - Part 1: Single lap shear Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2243-2 Structural adhesives - Part 2: Peel metal-metal Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2243-3 Structural adhesives - Part 3: Peeling test metal-honeycomb core Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2243-4 Structural adhesives - Part 4: Metal-honeycomb core flatwise tensile test Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2377 (ISO 14130) Glass fibre reinforced plastics - Determination of apparent interlaminar shear strength Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2378 Fibre reinforced plastics - Determination of water absorption by immersion Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2557 Carbon fibre preimpregnates - Determination of mass per unit area Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2558 Carbon fibre preimpregnates - Determination of the volatile content Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2559 Carbon fibre preimpregnates - Test method for the determination of the resin and fibre content and the mass of fibre per unit area Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2561 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test parallel to the fibre direction Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2562 Carbon fibre reinforced plastics - Unidirectional laminates - Flexural test parallel to the fibre direction Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2563 Carbon fibre reinforced plastics - Unidirectional laminates - determination of apparent interlaminar shear strength Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2597 Carbon Fibre reinforced plastics - Unidirectional laminates - Tensile test perpendicular to the fibre direction Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2667-1 (PRen) Foaming structural adhesives - Part 1: Tensile single-lap shear Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2667-2 (PRen) Foaming structural adhesives - Part 2: Compressive tube shear Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2746 Glass fibre reinforced plastics - Flexural test - Three point bend method Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2747 Glass fibre reinforced plastics - Tensile test Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2850-B (Pren) (ISO 14126-2) Carbon fibre thermosetting resin unidirectional laminates - Compression test parallel to fibre direction - Method B Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 2951 Metallic materials - Micrographic determination of content of non-metallic inclusions Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 3114 Microstructure of (a + ß) titanium alloy wrought products Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 3615 Fibre reinforced plastics - Determination of the conditions of exposure to humid atmosphere and of moisture absorption Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 3683 Titanium alloy wrought products - Determination of primary a content - Point count method and line intercept method Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 3684 Titanium alloy wrought products - Determination of ß transus temperature - Metallographic method Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 3976 Titanium and titanium alloys - Chemical analysis for the determination of hydrogen content Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 6072 Constant amplitude fatigue testing (HCF) High QualifiedPending TQ and QCS - Qualified by grandfathering without QCS
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA EN 6072 (machining) Fatigue test specimen machining (NADCAP test code O) Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA IGC 04-24-176 Aluminium alloys - Ultimate analysis - Determination of the copper content by electrogravimetric analysis Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 10119 Carbon fibre - Determination of density Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 1183-1 Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 148-1 (low temp.) Charpy pendulum impact test (low temperature) Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 148-1 (room temp.) Charpy pendulum impact test (ambient temperature) Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 179-1 Plastics – Determination of Charpy impact properties – Part 1: Non-instrument impact test Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 26845Chemical analysis of refractories - General requirements for wet chemical analysis, atomic absorption spectrometry (AAS) and inductively coupled plasma atomic
emission spectrometry (ICP-AES) methodsQualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 2819 Metallic coatings on metallic substrates - Electrodeposited and chemically deposited coatings - Review of methods available for testing adhesion Low Qualified 221 Westmoreland Drive / 14 Bayhill Drive / 209 Cherry Hill Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 3651-1Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid
medium by measurement of loss in mass (Huey test)Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 3651-2 Determination of resistance to intergranular corrosion of stainless steels - Part 2: Ferritic, austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in media containing sulfuric acidLow Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 3887 Steels - Determination of depth of decarburization Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 527-5 Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 643 Steels - Micrographic determination of the apparent grain size Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 6506 (ASTM E10) Brinell hardness test Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 6507 (ASTM E92) Vickers hardness test Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 6508 (ASTM E18) Rockwell hardness test Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA ISO 671 Steel and cast iron - Determination of sulphur content - Combustion titrimetric method Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-01 Fastener test methods - Method 1: Salt Spray Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-02 Fastener test methods - Method 2: Interaction Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-04 Fastener test methods - Method 4: Lap joint shear Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-05 Fastener test methods - Method 5: Stress durability Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-06 Fastener test methods - Method 6: Hardness Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-08 Fastener test methods - Method 8: Tensile strength Low Authorised to proceed Dec-18 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-09 Fastener test methods - Method 9: Stress corrosion Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-10 Fastener test methods - Method 10: Stress rupture Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-11 Fastener test methods - Method 11: Tension fatigue High QualifiedPending TQ and QCS - Qualified by grandfathering without QCS
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-12 Fastener test methods - Method 12: Thickness of metallic coatings Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-13 Fastener test methods - Method 13: Double shear test Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-18 Fastener test methods - Method 18: Elevated temperature tensile strength Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA NASM 1312-20 Fastener test methods - Method 20: Single shear Low Qualified 221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA Z_ICP-MS Inductively coupled plasma mass spectroscopy (ICP-MS) Qualified
ASTM E2823 - Standard Test Method for Analysis of Nickel Alloys by
Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
221 Westmoreland Drive
276098 WESTMORELAND MECHANICAL TESTING (USA) YOUNGSTOWN USA Z_Metal. Spec. prep Metallic specimen preparation (for mechanical testing) Qualified 221 Westmoreland Drive / 14 Bayhill Drive / 209 Cherry Hill Drive
Page 32 de 32