Post on 07-Jul-2018
8/19/2019 zero stiffness detail
1/2
8/19/2019 zero stiffness detail
2/2
along the d.o.f where the stiffness is zero, that point may not be a trouble-spot.
What is the usefulness of these messages :
A zero stiffness message can be a tool for investigating the cause of instabilities in the model. An instability is a
condition where a load applied on the structure is not able to make its way into the supports because no pathsexist for the load to flow through, and may result in a lack of equilibrium between the applied load and the supportreaction. A zero stiffness message can tell us whether any of those d.o.f are obstacles to the flow of the load.
Print this Page Close Window
To send this page to a friend or colleague, please use the following URL:http://www.reiworld.com/Search.asp?id=SP-1496
http://window.print%28%29/http://window.print%28%29/http://window.close%28%29/http://window.close%28%29/http://window.close%28%29/http://window.print%28%29/