Post on 22-Sep-2020
Installation Guide
SINGLE HANDLE PULL DOWN KITCHEN FAUCET
MODEL: TKWF19Y
Parts & Accessories DiagramCritical Dimensions
1
2
3
4
5
Handle
Rubber Plug
Fixing Screws
Handle Cap
Mounting Nut
Cartridge
Fixing Screw
6
1
5
2
3
8
9
10
4
7
11
15
16
14
18
19
20
13
17
21
22
26
23
28
29
30
31
32
33
34
35
24
27
25
Pre-installation NoticeEnsure that the installation table is clean;DO NOT hit/strike the unit, do not place heavy objects upon the unit, or hang weight from it: doing so may lead to leakage and destruction of property; Run water through the unfitted pipes to safely clear them of debris before installing the unit;Please read these installation tips before you go. For an expert shower head installation, you should contact a licensed professional plumbing contractor in your area. However, if you're ready and eager to install your own shower head, TECCPO offers these helpful hints below.
PreparationCheck package contents before installation, if there are any loose parts please contact with our Customer Service Team.
Faucet Body9.8-inch Deck PlateRubber GasketIron GasketMounting Nut
2. Always turn water supply OFF and make sure there is not water pressure inside the water pipe before removing existing shower head and BEWARE of the potential for hot water burns.3. Items You'll Need for Installation:
Adjustable wrench Goggles Screwdriver
Bucket Flashlight Soft Cloth
12
1.2.
3.
4.
1.
1
2
3 4 5
Installation InstructionsStep 1. Place the deck plate and gray deck plate horizontally on the installation countertop and align the deck plate hole with the mounting countertop hole, insert all three faucet hoses into the hole of the countertop;
Step 2. Connect nut according to ①. ②. ③ in sequence and tightening by wrench;
12
3
Step 3. Connect hose to hot water and cold water supplies;
Step 4. Run water through the pipes to safely clear them of debris(20-30 seconds);
Step 5. Install the sprayer hose weight in the hose(as shown in the picture below), tightened the screw and insert the hose into the quick-connector;
Step 6. Check all the connection location to ensure that the installation is correct, double check whether the outlet hose rotates smoothly and the spray wand can pull out smoothly.
Cleaning and Maintenance1. Clean the surface of the product with a mild detergent;2. Rinse the surface of the product with the clean water and then wipe up the surface of the product thoroughly with a soft cloth;3. No abrasive-containing cleaning products.
WarrantyAll parts and finishes of this TECCPO® faucet are warranted for 10 years from the date of purchase, includes commercial users(Check out the details from Official Website: www.TECCPOTOOLS.com)
Customer SupportFor questions, support, or warranty claims, please contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.E-Mail: support@TECCPOTOOLS.com
Follow us for more information:Facebook: www.facebook.com/TECCPO.US
Please note, TECCPO® can only provide after sales service for products purchased directly from TECCPO. If you have purchased from a different seller, please contact them directly for service or warranty issues.
- 01 - - 05 - - 06 - - 07 -- 02 - - 03 - - 04 - - 08 -
3
7 6 589
1112
13
15
19
21
23
10
25
2728
14
16
35
20
22
24
32
26
1
33
34
31
2
4
17
18
3029
Cartridge Base
Inlet Hose Clip
Zinc Alloy Body
O-Ring
Retainer
Connector
Two Sets O-Ring
SUS Spout
Pull Down Hose
Sprayer Retainer
Pull Down Sprayer
NUT
Two Screws
Connecting Nut
Body Gasket
Decor Plate
Gasket
Mounting Threaded Tube
Silica Gel Gasket
Iron Gasket
Mounting Nut
Three Sets Cross Cylindrical Head Screws
Hose Guide
Outlet Hose
Two Sets Stainless Steel Inlet Assembly
Filter
Check Valve
Weight
Company: Shenzhen Allsight E-business Co., LtdWeb: www.teccpotools.comFacebook: www.facebook.com/Teccpo.USE-mail: support@teccpotools.comADD: Room 104, Building P09, south China City Electronic trading Center, Longgang District, Shen Zhen, CHINAMade in China