Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

Summary

All credit goes to Stefanos Anagnostopoulos. 6 piece Joker mask printed inPLA, then glued, filler, sand, primer, and acrylic paint.

Costumes & Accessories > Masks

joker halloween

M Mike P

Joker Mask

VIEW IN BROWSER

updated 17. 5. 2019 | published 17. 5. 2019

3D M

ODEL

ONLY

8.4 MBupdated 17. 5. 2019

12.7 MBupdated 17. 5. 2019

14.8 MBupdated 17. 5. 2019

14.3 MBupdated 17. 5. 2019

15.3 MBupdated 17. 5. 2019

20.2 MBupdated 17. 5. 2019

Find source .stl files on Thingiverse.com

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

joker-part4.stl

part2-1-repaired.stl

joker-part3-left-repaired.stl

part2-2-repaired-repaired.stl

joker-part3-right.stl

joker-part1-repaired.stl

License

This work is licensed under a Creative Commons (International License)

Public Domain

✔ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition