XMC-6VLX. EDK. XMC-6VLX EDK. Xilinx Tools. Create New ISE Project. Xilinx ISE Design Suite 13.2 -> ISE Designs Tools -> Project Navigator File -> New Project. Project Settings. Project Summary. Select New Source Icon. Leaving ISE to XPS. Example Project Creation. - PowerPoint PPT Presentation
Transcript of XMC-6VLX
XMC-6VLX
EDK
- 2 -
XMC-6VLX EDK
Xilinx Tools
- 3 -
- 4 -
Create New ISE Project
• Xilinx ISE Design Suite 13.2 -> ISE Designs Tools -> Project Navigator
• File -> New Project
- 5 -
Project Settings
- 6 -
Project Summary
Select New Source Icon
Leaving ISE to XPS
- 8 -
- 9 -
Example Project Creation
New Source Wizard
• Add the Processor Subsystem as a module in ISE
• The will start Xilinx Platform Studio
Base System Builder Wizard
- 12 -
Create System for Custom Board
Add axi_bram_ctrl
- 13 -
Add DDR3 and UART
Project IP at this point
- 15 -
XPS View of Project
- 16 -
Look At IP Provided
- 17 -
IP Continued
- 18 -
Add AXI_CDMA
- 19 -
AXI_CDMA Address
- 20 -
Select MicroBlaze Connect
- 21 -
Add AXI_PCIe IP
- 22 -
AXI_PCIe Address
- 23 -
Default AXI bus Connections
- 24 -
Connect the M_AXI of axi_cdma_0 to S_AXI of the axi_pcie_0