Post on 24-Sep-2020
KST DIGITAL TECHNOLOGY LIMITED www.kstsz.com
Content is subject to change without notice 2019.10
X50-28-625 V2.0
Technical Specification
KST DIGITAL TECHNOLOGY LIMITED www.kstsz.com
Content is subject to change without notice 2019.10
. Installation Dimensions
Case Dimensions 104*48*120mm
Weight 1200g
KST DIGITAL TECHNOLOGY LIMITED www.kstsz.com
Content is subject to change without notice 2019.10
2. Operating Data
Rated Voltage DC28V
Voltage Range DC24V-32V
Stalling Torque 62.5N.m@28V
Rated Torque 20.0N.m@28V
Stalling Current 10.0A
Rated Current 2.20A
No-load speed 165°/S@25℃
Rated Speed 120°/S@25℃
Travel Angle ±50°@1000-2000us
Operating Temperature Range -20℃……+55℃
3. Performance
KST DIGITAL TECHNOLOGY LIMITED www.kstsz.com
Content is subject to change without notice 2019.10
4. PWM Command Signal Signal Voltage
TTL-Level: HIGH:min.3.3V,max.5.0V
TTL-Level: Low:min.0.0V,max.0.5V
Pulse Lengths 900-2100us
Pulse Lengths for Position -50°/0°/+50° 1000us/1500us/2000us
5.Materials and Features Case Material Aluminum Alloy 7075
Splash Surface Treatment Optional
Salt Water Resistance Optional
EMI/RFI Shielding Optional
Motor Type Brushless
Gear Set Material Titanium/Hardened Steel
Position Sensor Potentiometer
Position Feedback Optional
Shielded Connecting Cable J30J-15TJL(900mm)
(1500mm:Optional)
6. Output Shaft Spline (25T)
KST DIGITAL TECHNOLOGY LIMITED www.kstsz.com
Content is subject to change without notice 2019.10
7 .Electrical Connection (PWM Interface)
Industrial Standard J30J-15ZKP electrical Connector
Standard Connector
Type J30J-15ZKP
Mating J30J-15TJL
Pin Assignment (PWM)
1
DC + (Supply Voltage,DC28V)
2
3
4
5
GND (Supply Ground)
6
7
8
9 NC (Do not connect)
10 PWM(Command Signal)
11
12 RX+(DC4.5V-8.4V)
13
14 RX-(GND)
15
8 Accessories
Item1 25T-12-65(Servo Arm)
Item2 25t-12-60(Servo Arm)
Item3 25T-φ42(Servo Disc)
KST DIGITAL TECHNOLOGY LIMITED www.kstsz.com
Content is subject to change without notice 2019.10
Servo Arm Item # 25T-12-65
KST DIGITAL TECHNOLOGY LIMITED www.kstsz.com
Content is subject to change without notice 2019.10
Servo Arm Item # 25T-12-60
KST DIGITAL TECHNOLOGY LIMITED www.kstsz.com
Content is subject to change without notice 2019.10
Servo Disc with Spline Item # 25T-φ42mm