Compatible with 7 Wonders Duel®Wooden Wonder

Assembly Guide

Use wood glue for assembly.Always dry fit the parts first to make sure the components are correct ones. If you encounter any issues, please contact us at info@laserox.net or our Facebook page at facebook.com/laseroxinserts

2

Use an exacto knife to cut the bits connecting the parts to the frame.

Remove the parts from the frame with a rotating motion along the axis formed by the bits you just cut.

Use the exacto knife to remove any of the remaining connection bits.

Always dry-fit the parts to together without any glue to make sure you are assembling the correct parts.

Use a drop of glue along the joints and hold it in place until the glue has sufficiently dried.

3

Part numbersWe use the following codes to refer to individual parts in our assembly guide:

4

Main BoxRequired parts: A1, A2, A3, B5, B6, D1, D3, E1, E3

A2

A1B5

D1D1E1

A3

D3

B6B6

E3 x5(Choose slots depending on if you have sleeved cards or not)

5

“A” BoxRequired parts: G1, G2, G3, G4, G5

G5

G3G2

G4G5

G1

G1

6

“B” BoxRequired parts: C1, C2, C4, D2, E2

C1 C1

C1C4C4

C4C4

D2

E2 C2

7

“C” BoxRequired parts: B1, B2, B3, B4, C3, F1

C3C3

B2

B1

F2

B4

B3

8

Put into the box