Wi-Vi technology

Post on 15-Aug-2015

246 views 4 download

Tags:

Transcript of Wi-Vi technology

1

BANASTHALI UNIVERSITY

Shivi ChauhanB.Tech 3rd yr (EC)presents Seminar

on

“Wi-Vi Technology”

2

Outline:-

Introduction what can wi-vi do? Working Challenges faced

Flash effect Tracking human movements

Methods used to overcome the challenges how we can track using reflections? Applications Advantages & limitations future scope Reference

3

Introduction

Wi-Vi was created by Dina Katabi , a professor in MIT, and her graduate student Fadel Adib.

Wi-vi stands for wireless vision.

It captures moving objects behind the wall.

Device uses typically wi-fi hardware.

4

What can wi-vi do?

Detect the number of moving humans in a closed room.

Determine the relative locations of moving humans.

Enable communication through a wall without carrying a wireless device.

Identify simple gestures from behind a wall.

5

Working

Wi-vi uses two transmitting antennas and a single receiver.

Transmitting signals are low power wi-fi signals.

The two antennas transmit almost identical signals, except the second antenna’s signal is the inverse of the first, resulting in interference.

6

Challenges faced

flash effect

7

Flash effect:

When you take a device, point it at a wall, and transmit Wi-Fi signals, a huge amount of reflection is going to come from the wall itself.

8

Tracking human movement: when we get reflections from behind the wall ,we

will get reflections from everything in the environment: the chairs ,tables , and so on. How can we tease out the person’s reflections from all of these reflections? And once we do that, how can we track a person based on these reflections.

9

Method used to overcome the challenges:

Idea: transmit two waves that cancel each other when they reflect off static objects but not moving objects

wall is static disappears

people tend detectable to move

10

11

12

13

How can we track using reflections?

• Human reflects the signal, it’s as if he is the source of that signal.

• We know that if you want to track an RF source, you can do that using an antenna array.

• By steering the beam of the array, we can find the direction of from which the signal is coming.

• Now, when a person moves, that direction would change, and we are able to track him.

14

15

16

All reflections from static objects are cancelled out, and the only thing registered by the device is the moving humans

.

17

18

Advantages:

Wi-vi require same bandwidth & operates in the same range as wi-fi.

Wi-vi can perform through wall imaging without access to any device on the other side of the wall.

Wi-vi employs signals whose wavelength are 12.5 cm.

Extend human vision beyond the visible electromagnetic range, allowing us to detect objects in the dark or in smoke.

19

Limitations:

Display has very low resolution.

We cannot detect humans behind concrete walls thicker than 8” .

To achieve a narrow beam the human needs to move by about about 50 cm.

20

Future scope:

Wi-vi could be built into a smartphones or a special handheld device.

Evolution of seeing humans through denser building material and with a longer range.

High quality images.

21

22

References:

[1]http://people.csail.mit.edu/fadel/wivi/

[2] Fadel adib and Dina katabi, see through walls with wi-fi, ACM SIGCOMM’13 hongkong august 2013.

[3] http://geekshots.in /2013/12/16/wi-vi-wifi-vision-behind-the walls/

23

Thank you....queries????