Post on 12-Aug-2018
Get control of your process
When Reliability Counts
Sensors for Continuous Measurement in Wastewater Treatment and Industrial Processes
Cerlic Environmental Controls, Inc. P.O.Box 420097, Atlanta, GA 30342phone 404-256-3097, e-mail info@cerlicusa.com www.cerlic.com
When Reliability Counts Our knowledge and experienceof processes and applications combinedwith our rugged measuring instrumentsprovides customers with reliable and continous on-line information as well as enhanced knowledge about plant processes. Factory calibrated sensors allow for immediate measuring after installation. Easy operation and minimal maintenance separates Cerlic from the competition.
Service & TrainingAt Cerlic, our relationship with customers begins with the sale rather than ends. We offer training courses regularly in order to increase ”users” knowledge about both the process and the instruments. Our dedication to ”service after the sale” is reflected in our existing customers’ loyalty.
SS Slide rail assembly for easy installation and servicing. Available in two sizes 1.10” Ø for pHX, ReX and FLX and 2.60” Ø for O2X and ITX sensors. The rail has field adjustable stop. It’s easy to install and to inspect sensors for cleaning and calibration.
The flexible spring-loaded mounting bracket is designed to withstand turbulent conditions. The fiberglass telescopic rod is extendable to 13.5 feet and can be removed easily for inspection.
The automatic flushing device has no moving parts and ensures minimal maintenance and enhanced reliability. The flushing nozzle uses water or compressed air.
that will support a combination of 2 different digital sensors.The plug & play capabilities ensures for easy installations. The unit is designed with cutting edge digital technology and software, making BB2 easily upgradeable. Generates two 4-20 mA isolated output signals and can be upgraded with protocol board to 4 digital output signals. Same control box for all X style sensors.
with built-in automatic flushing system. Optical transmitter using continuous on-line measuring of suspended solids from 100 to 20,000 ppm or mg/l. Output signal is held constant during flushing cycle. Wide 3/4” (20 mm) gap between lenses to alleviate solids pluging. Applications: influent, primary effluent, aeration basins (MLSS), return activated sludge (RAS), filtrate, etc.
O2X - Submersible Dissolved Oxygen Sensor
True Suspended Solids Meter for FINAL EFFLUENT and REUSE WATER applications. Sensor is zero and temperature calibrated at factory, so you only enter actual sample points from lab tests in the field. Measuring ranges from 0-10.0 ppm up to 1,000 ppm. Meter does not drift with time and is calibrated with lab TSS tests. Automatic brush cleaning system keeps lenses clean. Application: reuse water, final effluent, recycled water, DAF supernatant, etc.
ITX-IL - In-line Suspended Solids Sensor NV - Submersible Pressure Sensors
Optical transmitter using NIR light to detect solids concentration or interfacein clarifiers. Field adjustable blanket concentration setting. Sensor is lowered on pulse from rake limit switch or timer. Sensor is lifted from the liquid and flushed after each cycle. Applications: Sludge blanket in WWTP and WTP clarifiers
Tracker - Portable Sludge Blanket Monitor
COW - Water Sampler
FLX - Immersion Sensor for Open Channel Flow
pHX and ReX - Sensors
BB2 - Control Box
ITX - Submersible Suspended Solids Sensor
with built-in automatic flushing system. Output signal is held constant during flushing cycle. Only need to calibrate once every 6-12 months. Oxygen electrode is cartridge design with built-in temperature sensor for continuous compensation. Optional: Analog 4-20 mA temperature output signal is available. Application: aeration basins, final effluent w/ temperature output, SBR, etc.
CTX LC - Low Suspended Solids Sensor In-line optical transmitter using NIR
(near-infrared) light for measurement of suspended solids in RAS, WAS, etc. 9/16" (15 mm) gap between lenses and built-in flushing nozzle to alleviate solids pluging. Supplied with 1 1/2” SS isola-tion valve. Designed for up to 90 psig applications. Applications: return and waste activated sludge (RAS/WAS), MLSS, Sand Filter Backwash monitoring, etc.
Flow measurement using D/P (differential pressure) sensor accurate to 0.1”. Reliable measurement not effected by foam, wind or bouncing liquid surfaces. Ventilated cable compensates for atmospheric pressure changes. Very stable signal that does not drift with time. New zero and full range calibration feature. Applications: Measure flow as a function of liquid height in open channels, aeration basins, clarifiers, weirs, etc.
pHX is ”Smart” calibrated with 4, 7, 10 buffers or manually with any buffers. ReX requires no calibration but can be checked with standard mV solutions. Flushing system is normally supplied to alleviate cleaning of electrodes. Applications pH: pHX influent, effluent, aeration basins, etc.Applications ORP: ReX nitrification basins, chlorine contact basins, aeration basins, etc.
Reliable and stable 4-20 mA output signal from 24 VDC loop power. 316SS membrane with protective cap and viton cable. Atmospheric pressure compensation w/ ventilated cable. Easy to install due to small diameter of sensor. Ranges 16.4' (5 m), 34.5' (10.5 m) and 66' (20 m). Optional pvc/SS hanger.Applications: lift stations, tanks, lakes, rivers, etc.
Industrial effluent and raw sewage sampler. Vacuum pump design w/ large 3/4” suction and discharge hoses. Always grabs the same sample volume due to adjustable sample tube. User friendly configuration for flow proportional, time intervals or special sampling intervals. The COW has prevacuum option for sampling more than 10’ and lift (20’ max). Option: SS constant temperature refrigerator for sample storage.Applications: influent, effluent, MLSS, RAS, etc.
is used for detecting sludge level in WWTP and WTP clarifiers, settling tanks etc. Compact design and uses standard 9V battery with a life of over 50 hours of continuous operation. Application: Sludge Judge replacement.
CAT - Automatic Sludge Blanket Tracker
-
-
-
-
-
-
-
-
-
-
-
-
Pressure Sensor
Open Channel Flow Sensor
pH Sensor
Redox (ORP) Sensor
Suspended Solids Sensor (submerged)
Low Suspended Solids Sensor
Suspended Solids Sensor
In-line Suspended Solids Sensor
Dissolved Oxygen Sensor (submerged)
Automatic Sludge Blanket Tracker
Portable Sludge Blanket Monitor
Water Sampler
NV
FLX
pHX
ReX
ITX
CTX LC
CTX
ITX-IL
O2X
CAT
Tracker
COW
DEWATERING UNIT
Return Activated Sludge (RAS)
Waste Activated Sludge (WAS)
Backwash Water
Dewatered SludgeCentrate
LIFT STATION INFLUENT WEIR
BAR SCREEN
GRIT CHAMBER
PRIMARY CLARIFIER ANAEROBIC BASIN
AERATION BASIN
SECONDARY CLARIFIER
SAND FILTER FINAL EFFLUENT FLUME
NV ITX
pHX
COW FLX
CTX LC
pHX COW
THICKENING CLARIFIER
ITX-IL
CTX LC
CTX
O2XNV FLX
pHX
CAT Tracker NVO2X
ITX
CAT Tracker
ITX-IL
CAT
ReXNV FLX
ITX-IL
that will support a combination of 2 different digital sensors.The plug & play capabilities ensures for easy installations. The unit is designed with cutting edge digital technology and software, making BB2 easily upgradeable. Generates two 4-20 mA isolated output signals and can be upgraded with protocol board to 4 digital output signals. Same control box for all X style sensors.
with built-in automatic flushing system. Optical transmitter using continuous on-line measuring of suspended solids from 100 to 20,000 ppm or mg/l. Output signal is held constant during flushing cycle. Wide 3/4” (20 mm) gap between lenses to alleviate solids pluging. Applications: influent, primary effluent, aeration basins (MLSS), return activated sludge (RAS), filtrate, etc.
O2X - Submersible Dissolved Oxygen Sensor
True Suspended Solids Meter for FINAL EFFLUENT and REUSE WATER applications. Sensor is zero and temperature calibrated at factory, so you only enter actual sample points from lab tests in the field. Measuring ranges from 0-10.0 ppm up to 1,000 ppm. Meter does not drift with time and is calibrated with lab TSS tests. Automatic brush cleaning system keeps lenses clean. Application: reuse water, final effluent, recycled water, DAF supernatant, etc.
ITX-IL - In-line Suspended Solids Sensor NV - Submersible Pressure Sensors
Optical transmitter using NIR light to detect solids concentration or interfacein clarifiers. Field adjustable blanket concentration setting. Sensor is lowered on pulse from rake limit switch or timer. Sensor is lifted from the liquid and flushed after each cycle. Applications: Sludge blanket in WWTP and WTP clarifiers
Tracker - Portable Sludge Blanket Monitor
COW - Water Sampler
FLX - Immersion Sensor for Open Channel Flow
pHX and ReX - Sensors
BB2 - Control Box
ITX - Submersible Suspended Solids Sensor
with built-in automatic flushing system. Output signal is held constant during flushing cycle. Only need to calibrate once every 6-12 months. Oxygen electrode is cartridge design with built-in temperature sensor for continuous compensation. Optional: Analog 4-20 mA temperature output signal is available. Application: aeration basins, final effluent w/ temperature output, SBR, etc.
CTX LC - Low Suspended Solids Sensor In-line optical transmitter using NIR
(near-infrared) light for measurement of suspended solids in RAS, WAS, etc. 9/16" (15 mm) gap between lenses and built-in flushing nozzle to alleviate solids pluging. Supplied with 1 1/2” SS isola-tion valve. Designed for up to 90 psig applications. Applications: return and waste activated sludge (RAS/WAS), MLSS, Sand Filter Backwash monitoring, etc.
Flow measurement using D/P (differential pressure) sensor accurate to 0.1”. Reliable measurement not effected by foam, wind or bouncing liquid surfaces. Ventilated cable compensates for atmospheric pressure changes. Very stable signal that does not drift with time. New zero and full range calibration feature. Applications: Measure flow as a function of liquid height in open channels, aeration basins, clarifiers, weirs, etc.
pHX is ”Smart” calibrated with 4, 7, 10 buffers or manually with any buffers. ReX requires no calibration but can be checked with standard mV solutions. Flushing system is normally supplied to alleviate cleaning of electrodes. Applications pH: pHX influent, effluent, aeration basins, etc.Applications ORP: ReX nitrification basins, chlorine contact basins, aeration basins, etc.
Reliable and stable 4-20 mA output signal from 24 VDC loop power. 316SS membrane with protective cap and viton cable. Atmospheric pressure compensation w/ ventilated cable. Easy to install due to small diameter of sensor. Ranges 16.4' (5 m), 34.5' (10.5 m) and 66' (20 m). Optional pvc/SS hanger.Applications: lift stations, tanks, lakes, rivers, etc.
Industrial effluent and raw sewage sampler. Vacuum pump design w/ large 3/4” suction and discharge hoses. Always grabs the same sample volume due to adjustable sample tube. User friendly configuration for flow proportional, time intervals or special sampling intervals. The COW has prevacuum option for sampling more than 10’ and lift (20’ max). Option: SS constant temperature refrigerator for sample storage.Applications: influent, effluent, MLSS, RAS, etc.
is used for detecting sludge level in WWTP and WTP clarifiers, settling tanks etc. Compact design and uses standard 9V battery with a life of over 50 hours of continuous operation. Application: Sludge Judge replacement.
CAT - Automatic Sludge Blanket Tracker
-
-
-
-
-
-
-
-
-
-
-
-
Pressure Sensor
Open Channel Flow Sensor
pH Sensor
Redox (ORP) Sensor
Suspended Solids Sensor (submerged)
Low Suspended Solids Sensor
Suspended Solids Sensor
In-line Suspended Solids Sensor
Dissolved Oxygen Sensor (submerged)
Automatic Sludge Blanket Tracker
Portable Sludge Blanket Monitor
Water Sampler
NV
FLX
pHX
ReX
ITX
CTX LC
CTX
ITX-IL
O2X
CAT
Tracker
COW
DEWATERING UNIT
Return Activated Sludge (RAS)
Waste Activated Sludge (WAS)
Backwash Water
Dewatered SludgeCentrate
LIFT STATION INFLUENT WEIR
BAR SCREEN
GRIT CHAMBER
PRIMARY CLARIFIER ANAEROBIC BASIN
AERATION BASIN
SECONDARY CLARIFIER
SAND FILTER FINAL EFFLUENT FLUME
NV ITX
pHX
COW FLX
CTX LC
pHX COW
THICKENING CLARIFIER
ITX-IL
CTX LC
CTX
O2XNV FLX
pHX
CAT Tracker NVO2X
ITX
CAT Tracker
ITX-IL
CAT
ReXNV FLX
ITX-IL
that will support a combination of 2 different digital sensors.The plug & play capabilities ensures for easy installations. The unit is designed with cutting edge digital technology and software, making BB2 easily upgradeable. Generates two 4-20 mA isolated output signals and can be upgraded with protocol board to 4 digital output signals. Same control box for all X style sensors.
with built-in automatic flushing system. Optical transmitter using continuous on-line measuring of suspended solids from 100 to 20,000 ppm or mg/l. Output signal is held constant during flushing cycle. Wide 3/4” (20 mm) gap between lenses to alleviate solids pluging. Applications: influent, primary effluent, aeration basins (MLSS), return activated sludge (RAS), filtrate, etc.
O2X - Submersible Dissolved Oxygen Sensor
True Suspended Solids Meter for FINAL EFFLUENT and REUSE WATER applications. Sensor is zero and temperature calibrated at factory, so you only enter actual sample points from lab tests in the field. Measuring ranges from 0-10.0 ppm up to 1,000 ppm. Meter does not drift with time and is calibrated with lab TSS tests. Automatic brush cleaning system keeps lenses clean. Application: reuse water, final effluent, recycled water, DAF supernatant, etc.
ITX-IL - In-line Suspended Solids Sensor NV - Submersible Pressure Sensors
Optical transmitter using NIR light to detect solids concentration or interfacein clarifiers. Field adjustable blanket concentration setting. Sensor is lowered on pulse from rake limit switch or timer. Sensor is lifted from the liquid and flushed after each cycle. Applications: Sludge blanket in WWTP and WTP clarifiers
Tracker - Portable Sludge Blanket Monitor
COW - Water Sampler
FLX - Immersion Sensor for Open Channel Flow
pHX and ReX - Sensors
BB2 - Control Box
ITX - Submersible Suspended Solids Sensor
with built-in automatic flushing system. Output signal is held constant during flushing cycle. Only need to calibrate once every 6-12 months. Oxygen electrode is cartridge design with built-in temperature sensor for continuous compensation. Optional: Analog 4-20 mA temperature output signal is available. Application: aeration basins, final effluent w/ temperature output, SBR, etc.
CTX LC - Low Suspended Solids Sensor In-line optical transmitter using NIR
(near-infrared) light for measurement of suspended solids in RAS, WAS, etc. 9/16" (15 mm) gap between lenses and built-in flushing nozzle to alleviate solids pluging. Supplied with 1 1/2” SS isola-tion valve. Designed for up to 90 psig applications. Applications: return and waste activated sludge (RAS/WAS), MLSS, Sand Filter Backwash monitoring, etc.
Flow measurement using D/P (differential pressure) sensor accurate to 0.1”. Reliable measurement not effected by foam, wind or bouncing liquid surfaces. Ventilated cable compensates for atmospheric pressure changes. Very stable signal that does not drift with time. New zero and full range calibration feature. Applications: Measure flow as a function of liquid height in open channels, aeration basins, clarifiers, weirs, etc.
pHX is ”Smart” calibrated with 4, 7, 10 buffers or manually with any buffers. ReX requires no calibration but can be checked with standard mV solutions. Flushing system is normally supplied to alleviate cleaning of electrodes. Applications pH: pHX influent, effluent, aeration basins, etc.Applications ORP: ReX nitrification basins, chlorine contact basins, aeration basins, etc.
Reliable and stable 4-20 mA output signal from 24 VDC loop power. 316SS membrane with protective cap and viton cable. Atmospheric pressure compensation w/ ventilated cable. Easy to install due to small diameter of sensor. Ranges 16.4' (5 m), 34.5' (10.5 m) and 66' (20 m). Optional pvc/SS hanger.Applications: lift stations, tanks, lakes, rivers, etc.
Industrial effluent and raw sewage sampler. Vacuum pump design w/ large 3/4” suction and discharge hoses. Always grabs the same sample volume due to adjustable sample tube. User friendly configuration for flow proportional, time intervals or special sampling intervals. The COW has prevacuum option for sampling more than 10’ and lift (20’ max). Option: SS constant temperature refrigerator for sample storage.Applications: influent, effluent, MLSS, RAS, etc.
is used for detecting sludge level in WWTP and WTP clarifiers, settling tanks etc. Compact design and uses standard 9V battery with a life of over 50 hours of continuous operation. Application: Sludge Judge replacement.
CAT - Automatic Sludge Blanket Tracker
-
-
-
-
-
-
-
-
-
-
-
-
Pressure Sensor
Open Channel Flow Sensor
pH Sensor
Redox (ORP) Sensor
Suspended Solids Sensor (submerged)
Low Suspended Solids Sensor
Suspended Solids Sensor
In-line Suspended Solids Sensor
Dissolved Oxygen Sensor (submerged)
Automatic Sludge Blanket Tracker
Portable Sludge Blanket Monitor
Water Sampler
NV
FLX
pHX
ReX
ITX
CTX LC
CTX
ITX-IL
O2X
CAT
Tracker
COW
DEWATERING UNIT
Return Activated Sludge (RAS)
Waste Activated Sludge (WAS)
Backwash Water
Dewatered SludgeCentrate
LIFT STATION INFLUENT WEIR
BAR SCREEN
GRIT CHAMBER
PRIMARY CLARIFIER ANAEROBIC BASIN
AERATION BASIN
SECONDARY CLARIFIER
SAND FILTER FINAL EFFLUENT FLUME
NV ITX
pHX
COW FLX
CTX LC
pHX COW
THICKENING CLARIFIER
ITX-IL
CTX LC
CTX
O2XNV FLX
pHX
CAT Tracker NVO2X
ITX
CAT Tracker
ITX-IL
CAT
ReXNV FLX
ITX-IL
Get control of your process
When Reliability Counts
Sensors for Continuous Measurement in Wastewater Treatment and Industrial Processes
Cerlic Environmental Controls, Inc. P.O.Box 420097, Atlanta, GA 30342phone 404-256-3097, e-mail info@cerlicusa.com www.cerlic.com
When Reliability Counts Our knowledge and experienceof processes and applications combinedwith our rugged measuring instrumentsprovides customers with reliable and continous on-line information as well as enhanced knowledge about plant processes. Factory calibrated sensors allow for immediate measuring after installation. Easy operation and minimal maintenance separates Cerlic from the competition.
Service & TrainingAt Cerlic, our relationship with customers begins with the sale rather than ends. We offer training courses regularly in order to increase ”users” knowledge about both the process and the instruments. Our dedication to ”service after the sale” is reflected in our existing customers’ loyalty.
SS Slide rail assembly for easy installation and servicing. Available in two sizes 1.10” Ø for pHX, ReX and FLX and 2.60” Ø for O2X and ITX sensors. The rail has field adjustable stop. It’s easy to install and to inspect sensors for cleaning and calibration.
The flexible spring-loaded mounting bracket is designed to withstand turbulent conditions. The fiberglass telescopic rod is extendable to 13.5 feet and can be removed easily for inspection.
The automatic flushing device has no moving parts and ensures minimal maintenance and enhanced reliability. The flushing nozzle uses water or compressed air.
Get control of your process
When Reliability Counts
Sensors for Continuous Measurement in Wastewater Treatment and Industrial Processes
Cerlic Environmental Controls, Inc. P.O.Box 420097, Atlanta, GA 30342phone 404-256-3097, e-mail info@cerlicusa.com www.cerlic.com
When Reliability Counts Our knowledge and experienceof processes and applications combinedwith our rugged measuring instrumentsprovides customers with reliable and continous on-line information as well as enhanced knowledge about plant processes. Factory calibrated sensors allow for immediate measuring after installation. Easy operation and minimal maintenance separates Cerlic from the competition.
Service & TrainingAt Cerlic, our relationship with customers begins with the sale rather than ends. We offer training courses regularly in order to increase ”users” knowledge about both the process and the instruments. Our dedication to ”service after the sale” is reflected in our existing customers’ loyalty.
SS Slide rail assembly for easy installation and servicing. Available in two sizes 1.10” Ø for pHX, ReX and FLX and 2.60” Ø for O2X and ITX sensors. The rail has field adjustable stop. It’s easy to install and to inspect sensors for cleaning and calibration.
The flexible spring-loaded mounting bracket is designed to withstand turbulent conditions. The fiberglass telescopic rod is extendable to 13.5 feet and can be removed easily for inspection.
The automatic flushing device has no moving parts and ensures minimal maintenance and enhanced reliability. The flushing nozzle uses water or compressed air.