RAZORWELD ARC160MMA/TIG - 160 Amp DC Inverter WelderWelds:Steels,Stainless,CastIron,Bronze,Copper

RazorWeld

ProductCode:XA-ARC160RZ-KStandard Package includes: ARC160PFC Machine, Earth Lead & Arc Lead 25mm x 4m

Technical DataPower Supply 240V 1-Phase ±15%Rated Input Power 7.1 kVAI ieff as per AS/NZ60974-1 10.0 AmpsRated Output MMA 160 Amps / 26.4VRated Output TIG 160 Amps / 16.4VWelding Current Range 10 ~ 160 AmpsNo Load Voltage (OCV) VRD On 9V - VRD Off 77VDuty Cycle @ 40ºC as per AS/NZ60974-1 20% @ 160 Amps MMA

45% @ 160 Amps TIG Duty Cycle @ 25ºC (approximate) 40% @ 160 Amps MMA

80% @ 160 Amps TIGEfficiency 85%Power Factor 0.99Protection Class IP21SInsulation Class FDimensions (LxWxH) 365 x 135 x 227mmWeight 6.5 KgCertification Approval AS/NZ60974-1

OverviewThe RazorWeld ARC160PFC from Xcel-Arc is a high quality inverter welding machine with a primary function of DC-MMA (Stick) welding and additional DC-TIG function incorporating Lift-Arc Ignition. Produced using the very latest generation 40KHz IGBT inverter technology; this machine offers outstanding arc characteristics whilst also being highly reliable, robust and with the added benefit of being factory-fitted with a domestic 10 Amp plug with NZ Standards approval. The DC-MMA welding function delivers a smooth and incredibly stable arc, producing high quality welds including cast Iron, stainless and low hydrogen. With the inclusion of both Hot-Start and automatic Arc Force coupled with Selectable VRD and Power Factor Correction (PFC), this machine is perfectly suited to site work for use with most electrodes up to 4.0mm diameter. Connection of the optional XA17V Tig Torch provides intermediate level DC-TIG welding of steel, stainless steel, bronze and copper. The Lift-Arc TIG function delivers perfect arc ignition every time without any sticking or inclusion of the tungsten electrode to the work and a remarkably smooth stable arc produces high quality TIG welds. The ARC160RZ is an exceptional machine suitable for a wide range of applications including light to medium industrial use, site welding, farming and general repair and maintenance work. The ARC160PFC gives you great portability with the power to get the job done. Built to our specification and manufactured in compliance to AS/NZ60974-1.

Features■ New 40KHz inverter frequency technology■ PFC Power Factor Correction (for maximum electrical efficiency)■ MMA (stick electrode)

- Selectable On/Off VRD (Voltage Reduction Device)- Hot start (improves electrode starting)- Arc Force (boosts current to prevent electrode extinguishing)- Excellent arc stability with all electrodes

■ DC-TIG- Lift Arc ignition (prevents tungsten sticking during arc ignition)- Ultra smooth DC-TIG welding current

■ Thermal overload protection■ Generator compatible (recommend 7.5 kVA minimum)■ Tolerant to variable power supply

230VSinglePhase160AmpDCWelderMMA/TIGLatest40KHzInverter,PFC&SelectableVRDApproved Domestic 10 Amp Plug

RAZORWELD ARC160

XA-ARC160RZ-K Standard Package

10 AMP

Optional machine accessories available - refer page 16

info@weldingtechnology.co.nz www.weldingtechnology.co.nz 09 274 1246

WELDING TECHNOLOGY