MPW STANDARD CONSTRUCTION DETAILS

WATER CONSTRUCTION DETAILS TABLE OF CONTENTS - 1

WATER CONSTRUCTION DETAILS

TABLE OF CONTENTS

No. Description

EL-01 ELECTRONIC MARKING SYSTEM (EMS) CAUTION TAPE INSTALLATION

W-01 BEDDING AND TRENCHING DETAIL FOR TYPICAL WATER LINE

W-02 BACKFLOW PREVENTION & AIR GAP LOCATIONS REQUIRED DURING CONSTRUCTION

ACTIVITIES

W-03 METER & BACKFLOW SCHEMATIC FOR FIRE, DOMESTIC AND IRRIGATION SERVICES

W-04 PIPING UNDER PAVEMENT

W-05 PIPING UNDER DRIVEWAYS & OTHER NON-SCDOT PAVED ROADWAYS

W-06 HORIZONTAL/VERTICAL OFFSET FOR PERPINDICULAR CROSSINGS

W-07 RESTRAINED JOINT TABLE, HORIZONTAL & VERTICAL OFFSETS

W-08 TYPICAL RESIDENTIAL WATER SERVICE

W-09 1-1/2” OR 2” METER INSTALLATION FOR COMMERCIAL APPLICATIONS

W-10 METER INSTALLATION FOR COMMERCIAL APPLICATIONS

W-11 to 13 RESERVED FOR FUTURE USE

W-14 METER VAULT FOR METERS LARGER THAN 2”

W-15 VALVE BOX DETAIL

W-16 FIRE HYDRANT DETAIL

W-17 BLOW-OFF HYDRANT FOR DEAD END LINES

W-18 YARD HYDRANT DETAIL

W-19 TYPICAL WATER EASEMENT

W-20 THRUST BLOCK DETAIL

W-21 GRAVITY THRUST BLOCK DETAIL

W-22A AIR RELEASE VALVE PEDESTAL ASSEMBLY FOR WATER MAINS ONLY

W-22B PRECAST AIR RELEASE VALVE VAULT, WATER MAIN INSTALLATION ONLY

W-23 TYPICAL PIG LAUNCHER ON EXISTING WATER MAINS ONLY

W-24 TYPICAL BACKFLOW PREVENTOR FOR NEW WATER MAIN CONSTRUCTION

(*) Denotes that a revision has been made to the section, see Revision List on the following page for revision

descriptions