Post on 25-May-2018
Volume 5Cata log
Keymatic Pull Line of Locks
KenstanL O C K C O M P A N Y
K2
7
K2
16
K2
17
K2
1
K2
11
K2
10
XS V
Introduction
Cam Locks
Drawer/Door Locks
Gang Locks
Snap Bolt Lock
Glass Door Lock
Ratchet Locks
Keys
E
K2 K
eymatic
K2
6
2
2
K2
4K2
3K2
2K2
5
K2
14K2
13K2
12K2
15Plunger Locks
Volume 5Cata log
K2
9
K2
8Glass Door Lock
Gear Lock
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
INSERTABLE CORE
8 LOCKS IN ONE
KEY FUNCTIONS AS A PULL
Introduction
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
CF Custom Finish
ST Statuary Bronze
BL Matte Black
SB Satin Brass
PB Polished Brass
SN Satin Nickel
KeymaticPullLineofLocks
Kenstan is proud to introduce a new line of our Keymatic (K) series locks, the K2.
In addition to all the features of the original Keymatic series of locks, it has three new features that will help extend the life, ease operation, and simplify installation of the lock.
The lock face and the corresponding tubular key have been redesigned by add-ing an interlocking feature. This interlocking feature creates a solid connection between the key and the lock. Hence, the inserted key can be used as a Pull without damaging the key or the lock.
The lock can now be ordered without the core which can be inserted later, much like our Interchangeable Core and Removable Core Locks. This will allow case builders to install the housings (without the keyed cores) into their cases, stock them and ship them to the stores. Once the cases arrive at the store, loss prevention can install the separately ordered cores and maintain complete Key Control. Of course, if the End User and or the Case Builder prefer to receive the complete keyed lock we can ship it as such.
DeliveryAt Kenstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within two weeks from the receipt of your order. Rush orders and emergency services are available.
PlatingThe K2 line standard plating finish is Polished Nickel.
A wide range of special plating finishes is also available, including Satin Nickel, Polished Brass, Matte Black, Statuary Bronze, Satin Brass and Custom Finishes to match your showcase hardware.
Pleasenote: Extended lead-time and plating lot charges may apply to Special and Custom finishes. Please call Kenstan for details.
Key ControlKeymatic locks and keys are built to a high level of precision, making key duplica-tion very difficult. Please note: We recommend our factory original key for smooth lock operation. Use of non-Kenstan copy will void the Kenstan warranty on our locks.
We can register your keys and maintain your key plans by store, retail depart-ment, showcase/cabinets, or office and we maintain a historical database of key numbers.
The stamped number on the K2 key will have a prefex letter “P” followed by five numerical digits of which the last one represents the lock setting (1 to 8).
The Red Change Tool is stamped with the same code as the operating key, except the setting code is 0.
Key Retaining vs. Non-Key Retaining Lock FunctionThe K2 line standard operation is a key retaining function (captive), which means that the operating key can be removed in the locked position only; therefore, the lock cannot be accidentally left in the open/unlocked position.
K2 locks can also be supplied as non-key retaining (non-captive), which allows the key to be removed in both the locked and unlocked positions, this feature will eliminate the key pull feature on some locks.
PN Polished Nickel
KeymaticPullLine
Standard Plating Finish
Custom Plating Finish
Special Plating Finishes
* Extended lead-time and plating lot charges may apply to Special and Custom finishes. Please call Kenstan for details.
*
*
2 K21
F GBA D EC
CL K2051203PNYYW106
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
KenstanL O C K C O M P A N Y
A
B
C
D
E
F
Cam Type Price
STRAIGHT
101 5/8” $ 0.00 102 3/4” 0.00103 7/8” 0.00104 1” 0.00105 1-1/8” 0.00106 1-1/4” Std.107 1-3/8” 0.55108 1-1/2” 0.55110 1-3/4” 0.55112 2” 0.60116 2-1/2” 0.60
1/8” OFFSET
303 7/8” 0.70306 1-1/4” 0.75308 1-1/2” 0.75312 2” 0.80
1/4” OFFSET
403 7/8” 0.70404 1” 0.75406 1-1/4” 0.75408 1-1/2” 0.75410 1-3/4” 0.75412 2” 0.80414 2-1/4” 0.80
3/8” OFFSET
504 1” 0.82506 1-1/4” 0.75508 1-1/2” 0.75512 2” 0.80
1/2” OFFSET
606 1-1/4” 0.75608 1-1/2” 0.75610 1-3/4” 0.75612 2” 0.80
5/8” OFFSET
712 2” 2.10
HOOK
202 3/4” 0.70204 1” 0.75206 1-1/4” 0.75208 1-1/2” 0.75210 1-3/4” 0.75
PIN CAM
P604 9/16” offset 4.95
I
Prices vary acco
rdin
g to
q
uan
tity ord
ered.
Lock StyleCL Cam Lock
Core TypeK2 K2 Keymatic Pull
Housing Length Price MAXIMUM MATERIAL THICKNESS
BARREL WOOD METAL GLASS LENGTH
03 1/2” 5/8” 1/2” 15/16” $27.6104 3/4” 13/16” 11/16” 1-1/8” 27.2505 1-1/8” 1-3/16” 1” 1-1/2” 28.18
Cam Rotation LOCKED OPEN
0312 3 12 0306 3 6 0603 6 3 0609 6 9 0912 9 12 0906 9 6 1203 12 3 1209 12 9
Plating Finish Extended lead-time and plating lot charges may apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key Retaining
*Note: This option will eliminate the KEYPULL feature.
Y Yes Std.N* No 1.25
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different Location 4.95
Material InstallationW Wood 0.00WF Wood Flush Mount 1.15M Metal 0.00GR Glass with Round Hole 2.95GD Glass with Double “D” Hole 1.95O Other - No Mounting Hardware 0.00
Note: Keys are not included with this lock. See page 17 to order keys.
Note: All Cam Locks come with a 1-1/4” Straight Cam unless a different cam is chosen.
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
H
G
Spe
cial
Fin
ish
H
I
Th
ese
off
set
Cam
s ar
e n
ot
reve
rsab
le.
ATTENTION: A 7/8" hole is required to mount this lock.
Continued
CamLock CL
KeymaticPullLine
HOUSING LENGTHS 04 and 05
LOCKED @ 12 OPEN @ 3
12
3
HOUSING LENGTHS 03
BARREL LENGTH
1/4”
MAXIMUM MATERIAL
THICKNESS
WOOD INSTALLATION W
CAM ROTATION EXAMPLE
Data Sheet
2
BARREL LENGTH
1/8” TYP.
7/8” TYP.
1” TYP.
7/16”
5/8” TYP.
1-1/8” TYP.
MAXIMUM MATERIAL
THICKNESS
VERTICAL FLATS
SEE CAM TYPE
A 7/8" hole is required to mount this lock.
A 7/8" hole is required to mount this lock.
METAL INSTALLATION M
GLASS INSTALLATION - ROUND HOLE GR
GLASS INSTALLATION - DOUBLE D HOLE GD
Note: All Offset cams are not reversible.
CAM LOCK
CAMHEX NUT
ANTI-ROTATION MOUNTING PLATE
SEM-SCREW
CAM LOCK MOUNTED FLUSH
K23
ANTI-ROTATION MOUNTING PLATE
WOOD INSTALLATION FLUSH MOUNT WF
THREE TAB WASHER
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
CAM LOCK
ANTI-ROTATION THREE TAB WASHER
GLASS
FIXING WASHER ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
ANTI-ROTATION “L” BRACKET
FLUSH MOUNT COLLAR
FLUSH MOUNT COLLAR
CAM LOCK
ANTI-ROTATION THREE TAB WASHER
PLASTIC WASHERS
PLASTIC WASHERS
GLASS
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
CAM TYPES
CAM LOCK (CUT DOUBLE D HOLE ON SHEET METAL)
H
H
H
H
H
I
D
C
C
NOTE: # 6 SCREW USED TO PREVENT INSTALLATION NUT FROM BACKING OUT.
NOTE: # 6 SCREW USED TO PREVENT INSTALLATION NUT FROM BACKING OUT.
# 6 INSTALLATION SCREWS
# 6 INSTALLATION SCREWS
# 6 INSTALLATION SCREWS
# 6 INSTALLATION SCREWS
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
LENGTH
OFFSET DIM
LENGTHLENGTH
Straight Cam Offset Cam Hook Cam Pin Cam
11/32”
1-1/4”
1/4” DIA.
9/16”
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
F GBA D EC
CL K3051203PNYW106
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
KenstanL O C K C O M P A N Y
A
B
C
D
E
F
Cam Type Price
STRAIGHT
101 5/8” $ 0.00 102 3/4” 0.00103 7/8” 0.00104 1” 0.00105 1-1/8” 0.00106 1-1/4” Std.107 1-3/8” 0.55108 1-1/2” 0.55110 1-3/4” 0.55112 2” 0.60116 2-1/2” 0.60
1/8” OFFSET
303 7/8” 0.70306 1-1/4” 0.75308 1-1/2” 0.75312 2” 0.80
1/4” OFFSET
403 7/8” 0.70404 1” 0.75406 1-1/4” 0.75408 1-1/2” 0.75410 1-3/4” 0.75412 2” 0.80414 2-1/4” 0.80
3/8” OFFSET
504 1” 0.75506 1-1/4” 0.75508 1-1/2” 0.75512 2” 0.80
1/2” OFFSET
606 1-1/4” 0.75608 1-1/2” 0.75610 1-3/4” 0.75612 2” 0.80
5/8” OFFSET
712 2” 2.10
HOOK
202 3/4” 0.70204 1” 0.75206 1-1/4” 0.75208 1-1/2” 0.75210 1-3/4” 0.75
PIN CAM
P604 9/16” offset 4.95
FOR SWITCH KIT
SL No Cam* 0.00
HPrices vary acco
rdin
g to
qu
antity o
rdered
.
Lock StyleCL Cam Lock
Core TypeK3 K3 Keymatic Pull
Housing Length Price MAXIMUM MATERIAL THICKNESS
BARREL WOOD METAL GLASS LENGTH
02 7/16” 5/16” 11/16” $25.4003 1/2” 5/8” 1/2” 15/16” 26.3204* 3/4” 13/16” 11/16” 1-1/8” 27.2505 1-1/8” 1-3/16” 1” 1-1/2” 28.1810 1-5/8” 1-13/16” 47.5011 1-13/16” 2” 48.4312 2-1/8” 2-3/8” 49.3613 2-1/2” 2-13/16” 50.2914 2-11/16” 3” 51.2215 3” 3-3/8” 52.14
Cam Rotation LOCKED OPEN
0312 3 12 0306 3 6 0309* 3 9 0603 6 3 0612* 6 12 0609 6 9 0912 9 12 0903* 9 3 0906 9 6 1203 12 3 1206* 12 6 1209 12 9
Plating Finish Extended lead-time and plating lot charges may apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key Retaining*Note: This option will eliminate the KEYPULL feature.
Y Yes Std.N* No 1.25
Material InstallationW Wood 0.00WF Wood Flush Mount 1.15M Metal 0.00GR Glass with Round Hole 2.95GD Glass with Double “D” Hole 1.95O Other - No Mounting Hardware 0.00
Note: Keys are not included with this lock. See page 17 to order keys.
Note: All Cam Locks come with a 1-1/4” Straight Cam unless a different cam is chosen.
*Cam rotations are 170 degrees on key retaining locks. All 170 or 180 degree cam locks are clockwise, unless specified.
*Switch option available. See Page A10 to order switch kit.
H
G
Spe
cial
Fin
ish
Continued
LOCK
FACE SLEEVE
EXTENSION ROUND
MOUNTING SCREWS
ANTI-ROTATION PLATE
WASHER
STRAIGHT CAM
EXTENSION SLEEVE
INT. TOOTH LOCK WASHER
SCREW
CamLock CL
KeymaticPullLine
HOUSING LENGTHS 10, 11, 12, 13, 14 and 15
HOUSING LENGTHS 02, 03, 04 and 05
BARREL LENGTH
SEE CAM TYPE
1” TYP.
5/8” TYP.
7/8” TYP.
MAXIMUM MATERIAL
THICKNESS
B
A
1/8”
WASHER
1-1/4” TYP.
1-1/4” TYP.
3/8”
7/8” EXTENSION SLEEVE
ANTI-ROTATION PLATEFACE
SLEEVE
SCREW
BARREL LENGTH
CAM LOCK – EXPLODED VIEW
SET SCREW
VERTICAL FLATS
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
Data Sheet
MAXIMUM MATERIAL
THICKNESS
3
1/8” TYP.
1/4” TYP.
3/4” TYP.
K25
LOCKED @ 12 OPEN @ 3
12
3
METAL INSTALLATION M
GLASS INSTALLATION - ROUND HOLE GR
GLASS INSTALLATION - DOUBLE D HOLE GD
Note: All Offset cams are reversible.
CAM LOCK MOUNTED FLUSH
ANTI-ROTATION MOUNTING PLATE
NOTE: # 6 SCREW USED TO PREVENT INSTALLATION NUT FROM BACKING OUT.
WOOD INSTALLATION FLUSH MOUNT WF
CAM LOCK (CUT DOUBLE D HOLE ON SHEET METAL)
THREE TAB WASHER
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
CAM LOCK
ANTI-ROTATION THREE TAB WASHER
GLASS
FIXING WASHER
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
ANTI-ROTATION “L” BRACKET
FLUSH MOUNT COLLAR
FLUSH MOUNT COLLAR
CAM LOCKANTI-ROTATION THREE TAB WASHER
PLASTIC WASHERS
PLASTIC WASHERS
GLASS
ANTI-ROTATIONTHREE TAB WASHER(TABS BENT OVER TO PREVENT NUT FROM BACKING OUT)
CAM TYPES
All 180 degree rotations are clockwise, unless specified.
WOOD INSTALLATION W
CAM LOCK
CAM
LARGE HEX NUT
ANTI-ROTATION MOUNTING PLATE
# 6 INSTALLATION SCREWS
# 6 NUT RETENTION SCREWS
CAM ROTATION EXAMPLE
TABS BENT OVER TO PREVENT NUT FROM BACKING OUT
SMALL THREE TAB WASHER
TABS BENT OVER TO PREVENT NUT FROM BACKING OUT
SMALL THREE TAB WASHER
SMALL THREE TAB WASHER
TABS BENT OVER TO PREVENT NUT FROM BACKING OUT
SMALL THREE TAB WASHER
TABS BENT OVER TO PREVENT NUT FROM
BACKING OUT
SMALL THREE TAB WASHER
HEX NUT
TABS BENT OVER TO PREVENT NUT FROM
BACKING OUT
C
D
C
G
G
G
G
G
H
CAM ADAPTER
# 6 NUT RETENTION SCREWS
# 6 INSTALLATION SCREWS
NOTE: # 6 SCREW USED TO PREVENT INSTALLATION NUT FROM BACKING OUT.
LENGTH
OFFSET DIM
LENGTHLENGTH
Straight Cam Offset Cam Hook Cam Pin Cam
3/8”
1-1/4”
1/4” DIA.
9/16”
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
Prices vary acco
rdin
g to
qu
antity o
rdered
.
“Throw” (distance bolt travels from the locked to unlocked position) is 5/16”.
All dimensions shown are in the locked position.
DL Drawer/DoorLockKenstanL O C K C O M P A N Y
KeymaticPullLine
CBA D E F
DL K2 S 2001 PNYY
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
34103411(shown)
5/8”
1-5/16”
2001200220032004
SML
1/4” TYP.
1-3/8” TYP.
7/8” TYP.
2”
1-7/16”
5/8”
3/16” DIA. TYP.
22051-5/16”
1/8”
3/8”
3209
5/16”
3/8”3/4”
A
B
C
E
F
Lock StyleDL Drawer/Door Lock
Core TypeK2 K2 Keymatic Pull
Housing Length PriceS 13/16” $29.26 M 1-1/16” 31.49L 1-3/16” 34.56
Bolt TypeSTRAIGHT BOLT
2001 1-1/16” Std.2002 1-11/16” 0.102003 2-5/16” 0.202004 3-1/8” 0.30
3/8” OFFSET BOLT
2205 1-5/8” 0.60
DIECAST SPRING BOLT
3209 1-5/16” Std. 2.03
INVERTED SLIDING SPRING BOLT
3410 1-5/16” Left 9.973411 1-5/16” Right 9.97
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key Retaining*Note: This option will eliminate the KEYPULL feature on Straight and 3/8” Offset Bolt models.
N* No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different Location 4.95
Note: Keys are not included with this lock. See page 17 to order keys.
D
INVERTED SLIDING SPRING BOLT
STRAIGHT BOLT
3/8” OFFSET BOLT
DIECAST SPRING BOLT (3/16” bolt engagement recommended)
2
1/16”
5/8”
Spe
cial
Fin
ish
G
G
Note: Must be above the surface when
installed3/16” TYP.
K26
HOUSING LENGTHCD
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
26242636264826CL30243036304830CL
24242436244824CL28242836284828CL
5/8”
7/8” LOCKED DOWN
2” 1-7/16” 3/16” DIA. TYP.
CBA D E F
GL K2 S 2448 PNYY
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
KenstanL O C K C O M P A N Y GangLock GL
KeymaticPullLine
SML
7/8” TYP.
1/4” TYP.
1-3/8”
2” 1/16”
Gang Lock PackagesTo determine your item number enter the RED option code for each section as in the example below.
A
B
C
PackageGANG
Number of Drawers Price2 $ 6.863 9.93 4 13.76
Pin LengthA 5/8” B 3/4” C 1-1/8” D 1-7/8”
CBA
GANG 3C
GANG3C A kit with three adjustable stops, three 1-1/8” pins, three lock washers, and four closed bar guides.
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
A
B
C
D
E
F
Lock StyleGL Gang Lock
Core TypeK2 K2 Keymatic Pull
Housing Length PriceS 13/16” $28.16M 1-1/16” 30.34L 1-3/16” 33.32
Mount Style/Bar LengthFRONT MOUNT LOCKED UP
2424 24” 7.75 2436 36” 9.10 2448 48” 19.9524CL Custom Call24NO No Bar 1.07 SIDE MOUNT LOCKED UP
2624 24” 7.752636 36” 9.10 2648 48” 19.95 26CL Custom CallFRONT MOUNT LOCKED DOWN
2824 24” 7.75 2836 36” 9.10 2848 48” 19.9528CL Custom Call28NO No Bar 1.07 SIDE MOUNT LOCKED DOWN
3024 24” 7.75 3036 36” 9.10 3048 48” 19.95 30CL Custom Call
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different Location 4.95
Note: Keys are not included with this lock. See page 17 to order keys.
FRONT MOUNT – SIDE VIEW
SIDE MOUNT (Shown with a Gang 3C Kit)
FRONT MOUNT – FRONT VIEW
FRONT MOUNT (Shown with a Gang 3C Kit)
Not
ch fo
r P
in m
ust
be o
n B
otto
m o
f Dra
wer
Not
ch fo
r P
in m
ust
be o
n To
p of
Dra
wer
1-5/16” LOCKED UP
Throw (distance bolt travels from the locked to unlocked position) is 5/16”.
2
ABCD
1/4” TYP.
1/4” TYP.
1/8” TYP.
1” LOCKED DOWN
1-7/16” LOCKED
UP
Spe
cial
Fin
ish
G
G
Note: Must be above the surface when
installed3/16” TYP.
K27
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
All dimensions shown are in the locked position.
DL29 Double Door GlassLockKenstanL O C K C O M P A N Y
KeymaticPullLine
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
STANDARD SNAP BOLT
2K28
CBA D E F
DL K2 29 V01 PNYY
Lock StyleDL Door Lock
Core TypeK2 K2 Keymatic Pull
Housing Style Price29 Glass Mount Housing $40.60
Bolt Type V Vertical I Inverted
Bolt Length 01 3/8” Std.CL Custom 2.95
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
Note: Keys are not included with this lock. See page 17 to order keys.
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
A
B
C
D
E
F
Spe
cial
Fin
ish
G
G H
H
STRIKE
5/16”
3/8”
13/16”
1-1/16”
1-1/2”
1-1/16”
2”
GLASS
SCREWS TO MOUNT STRIKE NOT INCLUDED
SCREWS TO MOUNT LOCK
DOUBLE DOOR APPLICATION SINGLE DOOR APPLICATION
METAL PLATE WITH ADHESIVE BACK
New
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
KenstanL O C K C O M P A N Y GearLock DL37
KeymaticPullLine2
CBA D E F
DL K237DNPNY Y
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
Lock StyleDL Door Lock
Core TypeK2 K2 Keymatic Pull
Housing Style/Bolt Price37D Dual Gear Lock (Std.) 37S Single Gear Lock
Bar Length N No Bar (Standard) C Custom
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
Material InstallationW Wood Std.M Metal 3.95
Note: Keys are not included with this lock. See page 17 to order keys.
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
A
B
C
D
E
F
GEAR LOCK
Spe
cial
Fin
ish
G
G
K29
“Throw” (distance bolt travels from the
locked to unlocked position) is 1.16” per sideAll dimensions shown are in the locked position.
CLOSED 7” OPEN 4-3/16”
1-1/8”
8-9/16”
3-9/16”
15/16”
7/16”
1-1/8”
3/16”
.141
5/8”
1/8”
1”
New
CUSTOM BAR
WOOD
WOOD SCREWS
(NOT INCLUDED)
LOCK
CUSTOM BAR
LOCKSCREWS
MOUNTING PLATE
METAL
EXPLODED VIEW WOOD INSTALLATION
CUSTOM BAREXPLODED VIEW METAL INSTALLATION
CONNECTION POINT
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
All dimensions shown are in the locked position.
DL36 SnapBoltLockKenstanL O C K C O M P A N Y
KeymaticPullLine
CBA D E F
DL K2 S 36 PNNY
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
Lock StyleDL Drawer/Door Lock
Core TypeK2 K2 Keymatic Pull
Housing Length/Style PriceSTANDARD
S 13/16” $33.86M 1-1/16” 36.10L 1-3/16” 39.17
LOW PROFILE
SL 13/16” 35.06ML 1-1/16” 37.30LL 1-3/16” 40.37
Bolt Type SNAP BOLT
36 3/4”
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key RetainingN No Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
Note: Keys are not included with this lock. See page 17 to order keys.
LOW PROFILE SNAP BOLT
SML
3/8”
STRIKE
.83”
1-1/8”
7/8”
2”
1-7/16”
1-3/8”
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
A
B
C
D
E
F
STANDARD SNAP BOLT
3/16”
2
2”
7/8”
3/16” DIA.
SML
7/16”
3/16”
3/8”
3/16” DIA.
STRIKE
Spe
cial
Fin
ish
G
G
1-15/32”
Note: Must be above the surface when
installed3/16”
1-5/8”
1-5/8” 1-7/16”
Note: Must be above the surface when
installed3/16”
7/8”
K210
D
D
HOUSING LENGTHC
HOUSING LENGTHC
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
KenstanL O C K C O M P A N Y GlassDoorLock DL39
KeymaticPullLine2
CBA D E F
DL K2 39 0602 PNYYY
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
Lock StyleDL Door Lock
Core TypeK2 K2 Keymatic Pull
Housing Style Price39 Glass Mount Housing $40.60
Locked Position 06 6 12 12 03 3 09 9
Bolt Length 01 15/16” 1.5002 1-13/32” (Standard) 0.00
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
StrikeN No 0.0001 Cup Strike 1.25
Note: Keys are not included with this lock. See page 17 to order keys.
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
A
B
C
D
E
F
GLASS DOOR LOCK (For 1/4” glass application)
Spe
cial
Fin
ish
G
G
K211
EXPLODED VIEW
“Throw” (distance bolt travels from the
locked to unlocked position) is 0.29All dimensions shown are in the locked position.
1/4”
3/4”
1”
1/2”
7/32”
1-3/16”
INSTALLATION SCREWS
BOLT COVER
1/4” GLASS
RUBBER WASHERS
BOLT
BACK PLATE
STRIKE
H
H
BOLT LENGTH
Locked at 6 o’clock with 1-13/32” long bolt shown.
I
I
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
PL40 Plunger LockKenstanL O C K C O M P A N Y
KeymaticPullLine 2
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
CBA D E F
PL K2 40 S3 PNYY
Prices vary acco
rdin
g to
qu
antity o
rdered
.
ROUND EXTENDED SERIES (Plunger travels 9/16”)
ROUND SERIES
S1S2S3
3/16” THRU TYP.
7/8” TYP.
1-1/2” TYP.
1/2”
3/8”1”
TYP.
7/8” TYP.
Lock StylePL Plunger Lock
Core TypeK2 K2 Keymatic Pull
Housing Style40 Oval Flange
Plunger Type/Length PriceS SERIES
S1 3/8” $33.30S2 7/16” 33.06S3 5/8” 32.82
T SERIES
T1 1/4” 38.54T3 9/16” 38.42
ROUND SERIES
R1 3/8” 34.03R2 7/16” 33.72R3 5/8” 33.42
ROUND EXTENDED SERIES
R4 1-3/16” 39.34R5 1-5/16” 39.46R6 1-11/16” 39.58R7 2-7/16” 39.70
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
Note: Keys are not included with this lock. See page 17 to order keys.
T1T3
1/2”
STRIKE PLATE
1/8”
1/16”
R1R2R3
3/8”
R4R5R6R7
EXTENSION WILL NOT RETRACT INTO HOUSING
3/8”
S SERIES
All dimensions shown are in the locked position.
T SERIES
A
B
C
D
E
F
1/16” TYP.
Spe
cial
Fin
ish
G
G
2” TYP.
1/4” TYP. Note: Must be above the surface when installed
5/16” Note: Must be above the surface when installed
K212
D
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
KenstanL O C K C O M P A N Y PlungerLock PL45
KeymaticPullLine2
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
R1R2R3
3/8”
T1T3
1/8”
1/16”
CBA D E F
PL K2 45 S3 PNYY
R4R5R6R7
EXTENSION WILL NOT RETRACT INTO HOUSING
3/8”
ROUND EXTENDED SERIES (Plunger travels 9/16”)
S SERIES
S1S2S3
7/8” TYP.
1-1/8”
1/2”
#4-40 (STANDARD)
T SERIES
All dimensions shown are in the locked position.
Prices vary acco
rdin
g to
qu
antity o
rdered
.
Lock StylePL Plunger Lock
Core TypeK2 K2 Keymatic Pull
Housing Style45 No Flange
Plunger Type/Length PriceS SERIES
S1 3/8” $33.95S2 7/16” 33.70S3 5/8” 33.46
T SERIES
T1 1/4” 39.18T3 9/16” 39.06
ROUND SERIES
R1 3/8” 34.67R2 7/16” 34.37R3 5/8” 34.07
ROUND EXTENDED SERIES
R4 1-3/16” 39.97R5 1-5/16” 40.09R6 1-11/16” 40.21R7 2-7/16” 40.33
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
Note: Keys are not included with this lock. See page 17 to order keys.
A
B
C
D
E
F
ROUND SERIES
3/8”
5/8” TYP.
Spe
cial
Fin
ish
G
G
1/4” TYP. Note: Must be above the surface when installed
STRIKE PLATE
K213
D
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
PL49 PlungerLockKenstanL O C K C O M P A N Y
KeymaticPullLine 2
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
CBA D E F
PL K2 49 X PNYY
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
THROUGH THE TRACK PLUNGER
1”
1/2”
5/16”
9/32”
5/32”
1/8”
1-7/16”
15/32”
1/8”
27/64”
Lock StylePL Plunger Lock
Core TypeK2 K2 Keymatic Pull
Housing Style Price49 Through the Track $47.94
Plunger
Plunger Type X No Option
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
Note: Keys are not included with this lock. See page 17 to order keys.
“Throw” (distance bolt travels from the locked to unlocked position) is 7/16”.
All dimensions shown are in the locked position.
A
B
C
D
C
F
13/16”
19/32”
1/32”
ISOMETRIC VIEW WITH METAL TRACKG
G
K214
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
KenstanL O C K C O M P A N Y PlungerLock PL50
KeymaticPullLine2
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
PARTS INCLUDED QTY.
a DOUGHNUT 1
b J BRACKET 1 (anti-rotation)
c PLASTIC WASHER 2
d PLASTIC SPACER 1
e SCREW 4
L3
3/8”
1/8”
7/8”
1/8”
S1S2S3
7/8” TYP.
1” TYP.
1/2”
1/16” TYP. 1/2” TYP.
7/8” TYP.
3/8”
1-1/2” TYP.
1/8”
REAR GLASS
f
a
c
cFRONT GLASS
d
e
cd
a
c e
a DOUGHNUT
b J BRACKET (anti-rotation)
c PLASTIC WASHER
d PLASTIC SPACER
e SCREW
f STRIKE PLATE
T SERIES GLASS INSTALLATION
S SERIES (Parts included same as Round Series)
Prices vary acco
rdin
g to
qu
antity o
rdered
.
A
C
D
E
F
B
C
D
R4R5R6R7
R1R2R3
3/8” PLUNGER DIAMETER
EXTENSION WILL NOT RETRACT INTO HOUSING
a DOUGHNUT 1
c PLASTIC WASHER 2
d PLASTIC SPACER 1
e SCREW 4
PARTS INCLUDED QTY.
Lock StylePL Plunger Lock
Core TypeK2 K2 Keymatic Pull
Housing Style50 Round Flange
Plunger Type/Length PriceS SERIES
S1 3/8” $44.00 S2 7/16” 43.74 S3 5/8” 43.50
T SERIES
T1 1/4” 52.21 T3 9/16” 52.08
L SERIES
L3 3/8” 47.94
ROUND SERIES
R1 3/8” 44.81 R2 7/16” 44.48 R3 5/8” 44.16
ROUND EXTENDED SERIES
R4 1-3/16” 50.58 R5 1-5/16” 50.71 R6 1-11/16” 50.84 R7 2-7/16” 50.98
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.SN Satin Nickel 2.95PB Polished Brass 3.95SB Satin Brass 3.95BL Matte Black 3.95ST Statuary Bronze 3.95CF Custom Finish Call
Key RetainingN No 1.25Y Yes Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
Note: Keys are not included with this lock. See page 17 to order keys.
T1T3
STRIKE PLATE
1/8”
1/16”
PARTS INCLUDED QTY.a DOUGHNUT 2
b J BRACKET 1 (anti-rotation)
c PLASTIC WASHER 4
d PLASTIC SPACER 2
e SCREW 8
f STRIKE PLATE 1
ROUND SERIES (Plunger travels 9/16”)
L SERIES
T SERIES
All dimensions shown are in the locked position.
NOTE: A 1.19” hole is required to mount this glass lock.
1.19” HOLE DIAMETER
b
Spe
cial
Fin
ish
G
CBA D E F
PL K2 50 S3 PNYY
G
1/4” Note: Must be above the surface when installed
3/8” Note: Must be above the surface when installed
3/8” Note: Must be above the surface when installed
1/4” Note: Must be above the surface when installed
K215
D
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
RL60 RatchetLockKenstanL O C K C O M P A N Y
KeymaticPullLine 2
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
1” MINIMUM 3-1/8” MAXIMUM
3/4” MAX. GLASS THICKNESS
1-1/16”
1-1/2”
4-1/4”
ADJUSTABLE BAR B2
Lock StyleRL Ratchet Lock
Core TypeK2 K2 Keymatic Pull
Housing Style60 Ratchet
Bar Type PriceB1 Standard $28.25B2 Adjustable 33.94B5 Stick on 33.94B6 Screw on 33.94
Plating FinishExtended lead-time and plating lot chargesmay apply to Special and Custom finishes.
PN Polished Nickel Std.CF Custom Finish Call
Key RetainingN No Std.
Insert CoreY Yes Std.N Pack Core Separately 3.95ND Ship Core to Different 4.95
Location
Note: Keys are not included with this lock. See page 17 to order keys.
A
B
C
D
E
F
G
CBA D E F
RL K2 60 B1 PNNY
G
K216
2-1/2”
1/2”
1/4”
5/8” 1-1/2”
4-1/2”
1-1/4” TYP.
2-1/8” TYP.
11/16”
1/2” TYP.
1/4” MAX. GLASS THICKNESS
1-3/8” TYP.
1” MINIMUM 3-3/8” MAXIMUM
1” 1-3/16”
5/8” TYP.
STICK ON BAR B5
SCREW ON BAR B6
7/8”
1-1/2”
1/2”
2-7/16”
9/16”
STANDARD BAR B1
D
D
D
D
Data Sheet
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
Prices vary acco
rdin
g
to q
uan
tity ord
ered.
K2KeymaticTubularKeys
In the retail industry, opening a showcase has always been a matter of putting the key in the lock and pulling the door or drawer open with the key. Keys and locks were never designed to be used this way. That is until now! We designed our product to accommodate how people actually use their keys. With our new K2 Keymatic Pull Line of locks you still have the same great features of eight locks for the price of one. However, this specially tooled key interlocks with the face of the lock. Now you can use the key without the risk of damaging the keys or the lock.
Customers now have the option to color code the keys by depart-ment or lock setting (1 to 8).
The Red Change Tool is stamped with the same code as the oper-ating key, except the setting code is 0.
RED CHANGE TOOL TOOL
Item NumberTo determine your item number enter the RED option code for each section as in the example below.
CBA D
KEY K2 01BEXXXXXX
A
B
C
D
KenstanL O C K C O M P A N Y Key KEY
KeymaticPullLine2K217
OPERATING KEY COLORS
BL Black
BE Blue
PN Polished Nickel
WH White
P01120
E
E
OR Orange
PE Purple
YE Yellow
GN Green
Item Number Price
KEYK2TOOLXXXXXX$6.75
ItemKEY Key
Core Type PriceK2 K2 Keymatic $7.95
Operating KeyNo. 01 One 02 Two 03 Three 04 Four 05 Five 06 Six 07 Seven 08 Eight
Cover ColorBE Blue OR Orange PN Polished Nickel BL Black PE Purple GN Green YE Yellow WH White
Key CodeXXXXXX Specific
Up to 6 digits A Any
Kenstan assigns
New
KenstanL O C K C O M P A N Y
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com
Terms and Conditions of SaleVolume 5 KenstanL O C K C O M P A N Y
1. Pricing: Kenstan Lock reserves the right to institute price adjustments based upon fluctuation of material costs without prior notice. Orders, or balances of orders, that have not shipped within 6 months from the original order date may be subject to a price review.
2. Payment Terms: Payment must be made at time of purchase, unless otherwise approved by Kenstan with terms of Net 30 Days from the date of the invoice. A service charge of 1.5% per month will be charged on overdue accounts.
3. Shipping: Please be sure to specify your preferred shipping method on every order. For all orders received without shipping instructions, Kenstan will use our discretion to make carrier selection based upon the most economical method of shipment available to meet your required in house date. Kenstan is not responsible for risk of loss or damage to products in transit with the selected carrier.
4. Deliveries: At Kenstan, we assemble every lock to order and strive to meet your requested in-house date. Our standard lead time is to ship within two weeks from the receipt of your order. Rush orders and emergency services are available. Unless specifically prohibited in writing by the purchaser, Kenstan reserves the right to make partial shipments of any order.
5. Inspection: Kenstan Lock inspects all products in accordance with our standard quality control procedures. Upon receipt and inspection by the purchaser, any parts proven to be defective or not as ordered may be returned to Kenstan for repair or replacement following the conditions in the “Returned Goods” section (#6) below.
6. Returned Goods: Product replacement or account credit for any returned goods will be made solely at the discretion of Kenstan and will only be accepted upon the issuance of a Return Authorization number from Kenstan’s Customer Service Department. Merchandise proven to be defective, due to faulty material and/or workmanship, may be returned for full replacement or credit. Any product ordered incorrectly by the customer may be accepted for return and subject to a 50% handling charge. Locks made with special or out-of production parts are not returnable, unless prior arrangements have been made. Returned merchandise that is damaged in transit, due to inadequate return packaging, will not be accepted.
7. Warranty: Kenstan Lock warrants, for a period of one year from delivery, that our products are free from defects in material and workmanship and makes no other warranties, expressed or implied, including but not limited to the degree of security or the purchaser’s application or use of our product. Kenstan Lock Co. will not warranty any locks or parts that were modified outside of our factory. In the event of a product defect, Kenstan shall only be responsible to the extent of the cost of our product, and will not accept any claims for labor or loss of merchandise.
8. Cancellation: If all or any part of an order is cancelled before the completion of the product assembly by Kenstan, the purchaser shall be responsible for payment of all assembled items as well as any special parts ordered for items remaining unassembled at the time of cancellation. If pricing on the original order was based upon Kenstan’s quantity discount, a partial cancellation may affect the pricing on items already shipped and invoiced and a price adjustment will be made.
9. Catalog Dimensions and Sample Policy: Please be aware that all lock and part drawing dimensions carry a tolerance of plus or minus 1/16’’ and are for reference only. Please contact us for actual dimensions. All specifications are subject to change without notice. Samples products are available upon request.
Since 1963, Kenstan Lock Company has manufactured several lines of high-quality showcase and cabinet locks, each with their own unique security features. Each year, we continue to enhance our existing prod-uct lines, while adding new products to meet the ever-changing needs of our commercial, industrial and retail clients. We also offer a wide range of door hardware locks, such as mortise and rim cylinders, as well as le-ver and tubular handles for fitting rooms, stock rooms, offices, etc.
Our product lines are complimented by Kenstan as-sociates who are available to assist you with security layouts, keying plans and custom products as needed.
Each of our lines, and all of our products, are manu-factured using the highest standards of quality and we stand behind each and every product we deliver. From the quality products assembled in our factory to our shipping and customer service departments, our goal is to provide the best service possible, from start to finish.
At Kenstan, we take pride in our reputation that has been built on quality products, reliability and the excep-tional customer service that our clients depend on.
Kenstan Lock Company 101 Commercial Street, Plainview, NY 11803 P 516-576-9090 F 516-576-0100 E info@Kenstan.com W www.kenstan.com