Post on 16-Apr-2018
VIVA IML TUBES
In Mold Labeled Tubes - Cutting Edge Innovation for Top Tier BrandsVIVA IML TUBES
WWW.VIVA-HEALTHCARE.COM VIVA IML TUBES
Global Manufacturing
Printing IML film extrusion Esko artwork processing Gallus IML printing /Digital IML printing
New Concepts (from concept to manufacturing)
Fully integrated Tube and In-Mold label manufacturing
Hong Kong, China(HQ)
Warsaw, Poland
Toronto, Canada(2 plants)
About VIVA
State-of-the-art 3D design and simulation software3D-printing prototypeDigital-printingPrototype mold design and fabricationPrototype trials and qualifications based on industry quality requirementsProduction mold design and fabricationIn-house design and building of manufacturing process and automatic production lines
Tube/ Cap production Tube and cap injection-molding with Sumitomo / Netstal molding lines Tube and cap assembly by in-house-made fully automated machines Fully automated finished-product QC
Tube material : Polypropylene (FDA approved)
Process : Injection-molding with in-mold labeling
Cap material: Polypropylene (FDA approved)
CPP standard barrier propertiesEVOH barrier equivalent to PBL (0.6cc/m2/day)Foil barrier equivalent to PBL (0.8cc/m2/day)Aluminum (ABT) barrier equivalent to ABL (0.06cc/m2/day)
Flexo / Offset / Silkscreen up to 12 colors printCold foil / Hotstamp full flood cold foil or knockoutMatt, gloss, soft touch spot or full floodHolographic standard or custom holographic pattern
Gallus IML printing:
In-Mold Label Tube (IML Tube)
Suitable for mockup sample or short production run Up to 7 colors printOffline varnish printingOffline hotstamp / cold foil
Digital IML printing:
In-mold Label substrates:
Round Tube
D25 (1”)
Nose 1 ~1.2mm
Nose 1 ~1.2mm
21mm Width
21mm Width
Nose 3 ~4, 5, 6, 7mm
Snap On
Snap On
D48.5 (2”)
D50 (2”)
D55 (2-3/16”)
48.5mm Diameter
Snap OnOrifice ~ 1.5, 3, 5, 6mm
D38.5 (1-1/2”)
D35 (1-3/8”)
D30 (1-3/16”)
Nose 2 ~3mm Nose 3 ~4, 5, 6, 7mm
D19 (3/4”)Nose 3 ~4, 5, 6, 7mm
Lip ~1.3, 2mm
Nose 2 ~1.3, 3mm
Nose 1 ~1.2mm
Nose 3 ~4, 5, 6, 7mm
Lip~ 1.3, 2mm
Nose 2 ~1.3, 3mm
Nose 1 ~1.2mm
Nose 2 ~3mm
19mm Diameter
35mmDiameter
21mm Width
21mm Width
Orifice~0.5, 1.2, 2, 3, 5mm
Orifice~0.5, 1.2, 2, 3, 5mm
Orifice~1.5, 3, 5mm
Orifice~1.5, 3.5mm
Orifice~1.5, 3.5mm
Orifice~1.5, 3, 5, 6mm
Orifice~1.5, 3.5, 5, 6mm
Orifice~1.5, 3, 5, 6mm
Orifice~1.5, 3, 5, 6mm
Orifice~3, 5, 6mm
Orifice~2, 3, 5, 10mm
Orifice~2, 3, 5, 10mm
Orifice~0.5, 1.2, 2, 3, 5, 8mm
Orifice~0.5, 1.2, 2, 3, 5, 8mm
Orifice~ 2, 3, 5, 10mm
Orifice~ Max 4mm
Orifice ~1.5, 3, 5, 6mm
D30 Flat Oval
D30 Round Oval
D38.5 Round Oval
Orifice~ 1.5mm, 2mm
Orifice~ 1.5mm
Orifice~ 2.6mm
D48.5 Round Oval Orifice~ 2.6mm Orifice~ 3, 5, 6mm
Orifice~ 1.5, 3, 5, 6mm
Oval Tube
Dual Tube
Snap On Cap
2 Compartments
1 Flip, 2 orificesOrifice~ 1.5, 3, 5mm
2 Flips, 2 orificesOrifice~ 1.5, 3, 5mm
Tube size: D48.5 (2”) diameter
Capacity: 236ml (8oz) 4oz per side
Cap: Fliptop, single or double flip and orifice
Brush TubeMascara brushDoe foot brushLip brush
Eyecare TubeZinc Alloy tipCeramic tip
Cosmetic Tube
Airless Pump Tube
Airless pump: Aptar
Available tube sizes: D25, D35, D38.5, D48.5
Pump flow rate: D25- 150ul D35, D38.5 D48.5 - 200ul
D25 D35 D38.5 D48.5
Applicators Tube
Part : Foot4Doe foot with 4 holes (Silicone)
Part : Foot1 (with or without spring)Doe foot with 1 hole (Silicone)
Part : BrushLip brush (PBT)
Part : FlockFlocked doe foot (Hytrel + 1405M)
Part : BallMetal Ball
Part : Foot5Doe foot with 5 holes (Silicone)
Part : SpatprSpatula (TPR)
Part : Nose 21.3mm / 3mm Nose tip
Part : Nose 37mm Nose tip
Part : LipLip balm tip
Part : Nose 11.2mm Nose tip
Part : ScrubDoe foot Scrub (Silicone)
Part : SpaSpatula (Silicone)
D19 / D25 Custom Applicators
D19 / D25 Polypropylene Applicators
Pre-print IML Label
Stock Tube
Stock Tube
Amenity Tube
Stock Tube with Custom IML substrate Any choice of substrates for your barrier and decor requirements Apply adhesive labels or direct printing at filling on unprinted tube stocks Options: Standard white/clear in CPP or EVOH Foil or ABT silver metallic Holographic pattern
IML Label Inventory
Applications: Amenity
Tube Decorations: Silkscreen direct printAdhesive labelIn-mold labeling
Preprint label programReduce 50% lead time
Induction Seal Foil Seal Transparent Seal
Tamper-proofFliptop Cap
Tamper-proofShrink Sleeve
Vented Low Profile Cap
Metalized Cap Hotstamped RingMetal Overshell Cap
Special Closure & Tamper Proof
Special Closures
Tamper-proof
Octagonal CapD48.5 (21mm height)D50 (22mm height)
Note: Tube data above are only for your reference and final size to be determined by customer.
You may request any specific length for your required tube capacity and diameter.
D19 D25 D30 D35 D40 D48.5 D50 D5519 25 30 35 38.5 48.5 50 553/4 1 1-3/16 1-3/8 1-1/2 2 2 2-3/16
Round Round Round Round Round Round Round RoundTube Body Length (mm)
60708090 60
100 708090 75
100 85110 100 90120 105 95130 120 105
130 110120 100125 105135 115140 120146 130
135145150155160165174180190195200
10121517202530354550606575809095
105110120125130140145155160170175185200205220235250265280295310325340355370
9095 90
100 95105 100110 105115 110120 115125 120130 125135 130140 135145 140150 145155 150160 155165 160 125170 165 135176 170 145180 175 150190 180 160200 190 165206 200 170
206 180185195200206
Tube Volume to Size Chart
TypesActual Diameter (mm)Actual Diameter (Inch)
Shapefl. oz. mL0.340.410.500.570.750.851.001.251.501.752.002.252.502.753.003.253.503.754.004.254.504.755.005.255.505.756.006.256.757.007.508.008.509.009.50
10.0010.5011.0011.5012.0012.50
12232017
Contacts
Australia
Mark Hines
mhines@cinqplast.com.au
Tel: (61) 4-0457-0003
NAFTA
Darryl Laing
darryl.laing@vivacan.com
Tel: (416) 321-0622 ext:2256
Europe
Frank Van den Kieboom
frank.vandenkieboom@vivapackaging.be
Tel: (32) 3201-9797
NAFTA
Bruno Lebeault
bruno.lebeault@vivacan.com
Tel: (416) 321-0622 ext:2252
NAFTA (West Coast)
Stephen Kapparis
stephen.kapparis@vivacan.com
Tel: (416) 321-0622 ext:2261
China
Michael Duan
michael.duan@viva.com.hk
Tel: (86) 755-28892675
Asia Pacific
Andre Cheung
andre.cheung@viva.com.hk
Tel: (852) 2870-0119