Post on 04-Jun-2020
VITA – perfect match.
VITA
PRO
STH
ETIC
SOL
UTIO
NS
– D
entu
re te
eth
and
digi
tal p
rost
hetic
s Co
mpe
ndiu
m fo
r lab
orat
orie
s
Date of issue: 06.17
VITA PROSTHETIC SOLUTIONS – Denture teeth and digital prostheticsCompendium for laboratories
VITA CAD/CAM TEETHVITA CAD/CAM MATERIALSVITA CAD/CAM COMPONENTS
VITA PROSTHETIC SOLUTIONS – For the best dental prosthetics: natural, reliable, rich in variation.
Are you searching for the best solutions for full, partial and implant-retained dentures? With VITA PROSTHETIC SOLUTIONS, you can expect a very natural appearance, excellent durability and great variation in the fabrication of dentures. Since 1924, VITA has been combining German engineering skills with the practical knowledge of dental technology – “100 % German Dental Engineering” for reliable and practicable prosthetic solutions. The VITA specialists fabricate first-class denture teeth for you according to the highest quality standards, through both innovative processes and individual fabrication techniques. VITA offers you tailor-made solutions with coordinated components, from conven-tional to digital prosthetic. Our comprehensive portfolio allows you to find the right denture tooth for every case – from an esthetic, functional and economic viewpoint.
Best variety of shades and moulds for all cases.
Efficient CAD/CAM dentures for greater productivity.
VITAPAN® (anterior)VITAPAN® CUSPIFORM (posterior)VITAPAN SYNOFORM® (posterior)
Vivid play of shape and shade for natural results.
Solid, standard dentures with excellent cost efficiency.
VITAPAN EXCELL® (anterior)VITAPAN PLUS® (anterior)VITAPAN® LINGOFORM (posterior)VITA PHYSIODENS® (anterior) VITA PHYSIODENS® (posterior)
VITA MFT® (anterior)VITA MFT® (posterior)
VITAPAN
VITAPAN CUSPIFORM VITAPAN SYNOFORM
VITA MFT
VITA MFT
VITA DIGITAL PROSTHETIC
VITAPAN EXCELL VITAPAN PLUS VITA PHYSIODENS
VITAPAN LINGOFORM VITA PHYSIODENS
VITA PROSTHETIC SOLUTIONS – Overview of Indications
Anterior
Posterior Posterior
Full dentures
Partial dentures
Hybrid dentures
Implant-retained dentures
Gerontoprosthetics
Anterior
Posterior
Full dentures
Partial dentures
Hybrid dentures
Implant-retained dentures
Gerontoprosthetics
Full dentures
Partial dentures
Hybrid dentures
Implant-retained dentures
Gerontoprosthetics
Anterior Anterior Anterior
Posterior Posterior
Full dentures
Partial dentures
Hybrid dentures
Implant-retained dentures
Gerontoprosthetics
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
CAD
/ CA
M
TEET
HCA
D / C
AM
M
ATER
IALS
CAD
/ CA
M
COM
PO NE
NTS
With VITA PROSTHETIC, you can expect a natural appearance, good durability and great variety of moulds and shades.
German engineering from VITAVITA engineers and dental technicians jointly develop innovative, practicable prosthetic solutions – according to the highest standards.
100 % German Dental Engineering by VITA – for the best prosthetics in shape, shade and function!
For the highest quality standardsVITA denture teeth are manufactured using both modern processes and highly individual manual fabrication.
Manufacturing high-end dentures VITA PREMIUM PROSTHETIC offers you high-value MRP-composite teeth with naturally vivid play of shape and shade for the best, highly esthetic full, partial and implant-retained dentures.
VIVID PLAY OF SHAPE AND SHADE FOR NATURAL RESULTS.
VI
TAPAN EXCELL ®
VITA
PHYSIODENS ®
VITA
PHYSIODENS ®
VITAPAN PLUS ®
VITA
PAN® LINGOFORM
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
Anterior Anterior Anterior
Posterior Posterior
OVERVIEW OF TOOTH LINESRecommended anterior / posterior combinations
more product data
For all occlusal concepts due to multifunctional occlusal surface design.
For the best reproduction of function due to natural morphology.
For brilliant vitality in shape, shade and play of light.
For youthfully vibrant dentures with added translucency.
For lifelike dentures with intrecate mould design.
Full/implant-retained dentures
Full/implant-retained dentures
Partial/hybrid dentures
Full/implant-retained dentures
Partial/hybrid dentures
CAD
/ CA
M
TEET
HCA
D / C
AM
M
ATER
IALS
CAD
/ CA
M
COM
PO NE
NTS
lifelike three-dimensional moulds
brilliant play of shade and light
VITAPAN EXCELL® VITA
PAN
EXCE
LLVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PH
YSIO
DEN
SVI
TAPA
NLI
NGO
FORM
VITA
PAN
PLUS
What?
Benefits?
What for?
FACTS & FEATURES
• lifelike, three-dimensional, translucent premium anterior teeth made of MRP composite
• simple fabrication of highly esthetic denturesdue to lifelike tooth moulds with "golden" proportions
• brilliant play of shade and lightthanks to excellent light dynamics and harmonious shade progression
• good shade reproduction with remaining natural dentitiondue to excellent shade accuracy to the shade guide
• excellent durabilitythanks to high load capacity and abrasion stability
• efficient grinding and polishingdue to optimum material homogeneity and edge stability
• best solution for highly esthetic full, partial and implant-retained dentures
more product data
For brilliant vitality of shape, shade and play of light.
ANTERIOR
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITAPAN EXCELL®
BASIC INFORMATION
CharacteristicsMould • lifelike three-dimensional tooth geometry for brilliant results• distinctive incisal characteristics for special vitality• wide palatal bars for ideal interdental spacing / papilla creation
Special features• pronounced enamel portion / translucent edges for good
light dynamics• nuance-rich surface texture for lifelike play of light• integrated mamelon structure and whitish incisal region
for natural shade effect• 3D layered structure for natural shade gradient
Recommended indicationsBest prosthetic solution for:• full and partial dentures • implant-retained dentures
Occlusal/setup conceptSuitable for all established concepts of lingual and balanced occlusion:e.g. according to Gysi, according to Prof. A. Gerber, according toAPF/TIF, according to ABC
Available shades• 11 x VITA SYSTEM 3D-MASTER® shades
0M3, 1M1, 1M2, 2L1.5, 2M1, 2M2, 2R1.5, 3L2.5, 3M2, 3R2.5, 4M2• 15 x VITA classical A1–D4® shades
A1–D4 (without B1)
Available moulds/sets• 17 x upper anterior tooth moulds (divided into four mould groups)• 5 x lower anterior tooth moulds
O41 O43 O45 O47 O49 O51
T42 T44 T46 T47 T48 T50 T54
R45 R47 R49
S46
L33 L35 L37 L39 L41L41L41
VITA
PAN
VITA
PAN
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PAN
LIN
GOFO
RMVI
TAPA
NEX
CELL
VITA
PAN
PLUS
OVERVIEW OF MOULDS
Further information: VITA Prosthetic Solutions mould chart more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
triangular
rectangular
square
ovoid
Upper Anteriors
Lower Anteriors
ANTERIOR
7.4
9.1 9.1 9.7 10.3 10.9 12.3
7.9 8.4 8.6 9.0 9.3
7.7
9.5 9.9 10.4 10.9 11.3 11.6 12.7
8.1 8.2 8.5 8.8 9.2 9.8
8.2
8.5
9.9
10.3
11.2 11.7
8.6 8.9
5.0
8.6 9.0 9.4 9.8 10.2
5.2 5.2 5.9 6.2
VITAPAN EXCELL®
VITAPAN EXCELL
VITAPANLINGOFORM
O41 L 33 21L 21L
O4 3 L 33 21L 21L
O45 L 35 22L 22L
O47 L 37 22L 22L
O49 L 39 23L 23L
O51 L 41 24L 24L
VITAPAN EXCELL
VITAPANLINGOFORM
T42 L 33 21L 21L
T44 L 33 21L 21L
T46 L 35 22L 22L
T47 L37 22L 22L
T48 L37 22L 22L
T50 L39 24L 24L
T54 L41 24L 24L
R45 L35 22L 22L
R47 L37 22L 22L
R49 L39 23L 23L
S46 L35 22L 22L
RECOMMENDED COMBINATIONS
Combinations according to indications:For full/partial dentures and implant-retained dentures:VITAPAN EXCELL Anterior in combination with VITAPAN LINGOFORM Posterior
The information contained in the combination table is only intended as a guide, and can vary depending on the patient`s individual situation.
upper jaw (UJ) / lower jaw (LJ)
Anterior Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
41.3 33.2 30.1 30.7
43.1 33.2 30.1 30.7
45.1 35.3 31.6 32.1
47.3 37.3 31.6 32.1
49.1 39.0 34.2 34.8
51.4 41.2 35.8 36.4
Anterior Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
42.0 33.2 30.1 30.7
44.1 33.2 30.1 30.7
46.2 35.3 31.6 32.1
46.9 37.3 31.6 32.1
48.1 37.3 31.6 32.1
50.0 39.0 35.8 36.4
54.4 41.2 35.8 36.4
45.4 35.3 31.6 32.1
47.0 37.3 31.6 32.1
49.1 39.0 34.2 34.8
46.3 35.3 31.6 32.1
VITA
PAN
VITA
PAN
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PAN
LIN
GOFO
RMVI
TAPA
NEX
CELL
VITA
PAN
PLUS
VITAPAN EXCELL mould chartHandy metal case with all moulds for selecting teeth:• VITAPAN EXCELL Anterior
VITAPAN EXCELL tooth storage• X-small*: 67 Sets / 402 Anteriors • Small*: 134 Sets / 804 Anteriors• Medium*: 268 Sets / 1608 Anteriors• Large*: 400 Sets / 2400 Anteriors
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades.**
*) Note: The most frequently used moulds and shades come with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
VITACOLLAdhesive
VITAVM CCMasking/Fixation
VITAVM LCIndividualization
ASSORTMENTS AND STORAGE
ANTERIOR
Base materialsManufacturer recommendations CA
D /
CA
M
TEET
HCA
D /
CA
M
MAT
ERIA
LSCA
D /
CA
M
COM
PONE
NTS
youthful, lifelike moulds
extraordinary translucency
VITAPAN PLUS® VITA
PAN
EXCE
LLVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PH
YSIO
DEN
SVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
Benefits?
FACTS & FEATURES
For youthfully vibrant dentures with added translucency.
ANTERIOR
• Lifelike, premium anterior teeth made of MRP composite with added translucency
• lively play of light thanks to extraordinary translucency from the high proportion of enamel
• easy reconstruction of youthful esthetics thanks to three-dimensional lifelike tooth moulds
• excellent durability thanks to high load capacity and abrasion stability
• efficient grinding and polishing due to optimum material homogeneity and edge stability
• best solution for highly esthetic full, partial and implant-retained dentures
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
SWhat?
What for?
VITAPAN PLUS®
BASIC INFORMATION
CharacteristicsMould • tooth geometry with youthful volume for lifelike prosthetics• distinctively natural incisal characteristics for high vitality• Wide palatal bars for ideal interdental spacing/papilla creation
Special features• high proportion of enamel/translucent edges for the best
light transmission• nuance-rich surface texture for lifelike play of light• integrated mamelon structure and whitish incisal region
for natural shade effect• 3D layered structure for natural shade gradient
Recommended indicationsBest prosthetic solution for: • full and partial dentures with youthful esthetics• implant-retained dentures
Occlusal/setup conceptFor all established concepts of lingual and balanced occlusion:e.g. according to Gysi, according to Prof. A. Gerber, according toAPF/TIF, according to ABC
Available shades• 28 x VITA SYSTEM 3D-MASTER® shades
0M1, 0M3, 1M1–5M3 • 15 x VITA classical A1–D4® shades
A1–D4 (without B1)
Available moulds/sets• 18 x upper anterior tooth moulds (divided into four mould groups)• 6 x lower anterior tooth moulds
O41 O43 O45 O47 O47L* O49 O51
T42 T44 T46 T47 T48 T50 T54
R45 R47 R49
S46
L33 L35 L37 L37L* L39 L41
VITA
PAN
EXCE
LLVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PH
YSIO
DEN
SVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
*) O47L and L37L = tooth mould with longer tooth neck
OVERVIEW OF MOULDS
ANTERIOR
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Further information: VITA Prosthetic Solutions mould chart more product data
triangular
rectangular
square
ovoid
12.3
9.37.4
7.7
8.2
9.1
9.5
9.9
9.1
9.9
11.2
9.7
10.4
11.7
10.3
10.9
10.3
11.3
10.9
11.6 12.7
7.9
8.1
8.6
8.4
8.2
8.9
8.6
8.5
8.6
8.8
9.0
9.2 9.8
5.0
8.5
8.6
10.3
9.0 9.4 9.4 9.8 10.2
5.2 5.2 5.2 5.9 6.2
Upper Anteriors
Lower Anteriors
VITAPAN PLUS
VITAPANLINGOFORM
O41 L 33 21L 21L
O4 3 L 33 21L 21L
O45 L 35 22L 22L
O47 L 37 22L 22L
O47L* L 37L* 22L 22L
O49 L 39 23L 23L
O51 L 41 24L 24L
VITAPAN PLUS®
VITAPAN PLUS
VITAPANLINGOFORM
T42 L 33 21L 21L
T44 L 33 21L 21L
T46 L 35 22L 22L
T47 L37 22L 22L
T48 L37 22L 22L
T50 L39 24L 24L
T54 L41 24L 24L
R45 L35 22L 22L
R47 L37 22L 22L
R49 L39 23L 23L
S46 L35 22L 22L
RECOMMENDED COMBINATIONS
Combinations according to indicationFor full/partial dentures and implant-retained dentures: • VITAPAN PLUS Anterior in combination with VITAPAN LINGOFORM Posterior
The information contained in the combination table is only intended as a guide, and can vary depending on the patient`s individual situation.
upper jaw (UJ) / lower jaw (LJ)
Anterior
Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
41.3 33.2 30.1 30.7
43.1 33.2 30.1 30.7
45.1 35.3 31.6 32.1
47.3 37.3 31.6 32.1
47.3 37.3 31.6 32.1
49.1 39.0 34.2 34.8
51.4 41.2 35.8 36.4
Anterior
Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
42.0 33.2 30,1 30.7
44.1 33.2 30.1 30.7
46.2 35.3 31.6 32.1
46.9 37.3 31.6 32.1
48.1 37.3 31.6 32.1
50.0 39.0 35.8 36.4
54.4 41.2 35.8 36.4
45.4 35.3 31.6 32.1
47.0 37.3 31.6 32.1
49.1 39.0 34.2 34.8
46.3 35.3 31.6 32.1
VITA
PAN
EXCE
LLVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PH
YSIO
DEN
SVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORMVITAPAN PLUS mould chart
Handy metal case with all moulds for selecting teeth:• VITAPAN PLUS Anterior• VITAPAN PLUS Anterior and VITAPAN LINGOFORM Posterior
VITAPAN PLUS tooth storage• X-small*: 67 Sets / 402 Anteriors • Small*: 134 Sets / 804 Anteriors• Medium*: 268 Sets / 1608 Anteriors• Large*: 400 Sets / 2400 Anteriors
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades.**
*) Note: You will receive the most frequently used moulds and shades along with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
ANTERIOR
ASSORTMENTS AND STORAGE
VITAVM LCIndividualization
Base materialsManufacturer recommendations
VITACOLLAdhesive
VITAVM CCMasking/Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Additional information: Chapter on accessories and components
multifunctional occlusal surface design
precisely defined centric
VITAPAN® LINGOFORM VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PAN
LIN
GOFO
RMVI
TA
PHYS
IODE
NS
What?
Benefits?
What for?
FACTS & FEATURES
For all concepts of occlusion due to multifunctional occlusal surface design.
POSTERIOR
• Natural, multifunctional premium posterior teeth made of MRP composite
• Setup is easy and intuitive with "automatic" centric finding thanks to occlusal surfaces designed according to the cogwheel principle
• Can be used universally and reliably for all concepts of occlusion thanks to multifunctional occlusal surface design
• Time-saving setup without extensive grinding thanks to precisely defined centric
• Excellent durability thanks to high load capacity, abrasion stability and centric-supported function
• Good processability due to optimum material homogeneity and edge stability
• best solution for highly esthetic full, partial and implant-retained dentures
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
more product data
VITAPAN® LINGOFORM
BASIC INFORMATION
CharacteristicsMould• three-dimensional tooth geometry with natural lingobuccal
dimension• multifunctional occlusal surface design with defined centric contacts
Special features• finely nuanced surface texture for natural play of light• maxillary cusp angle: approx. 15° to 20°
Recommended indicationsBest prosthetic solution for: • full and partial dentures • implant-retained dentures
Occlusal/setup conceptSuitable for all established concepts of lingual and balanced occlusion:e.g. according to Gysi, according to Prof. A. Gerber, according toAPF/TIF, according to ABC
Especially suitable for:lingualized occlusal concepts
Available shades• 27 x VITA SYSTEM 3D-MASTER® shades
0M3, 1M1–5M3 • 15 x VITA classical A1–D4® shades
A1–D4 (without B1)
Available moulds/sets• 4 x upper posterior tooth moulds• 4 x lower posterior tooth moulds
21L 22L 23L 24L
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PAN
LIN
GOFO
RMVI
TA
PHYS
IODE
NS
OVERVIEW OF MOULDS
POSTERIOR
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
10.0 10.2 10.8 11.2
9.6 10.0 10.9 11.0
Further information: VITA Prosthetic Solutions mould chart
Posteriors
VITAPAN® LINGOFORM
RECOMMENDED COMBINATIONS
Combinations according to indicationsFor full/partial dentures and implant-retained dentures: • VITAPAN LINGOFORM Posterior with VITAPAN EXCELL Anterior• See combination table for VITAPAN EXCELL Anterioror• VITAPAN LINGOFORM Posterior with VITAPAN PLUS Anterior• See combination table for VITAPAN PLUS Anterior
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PAN
LIN
GOFO
RMVI
TA
PHYS
IODE
NS
POSTERIOR
VITAPAN LINGOFORM mould chartHandy metal case with all moulds for tooth selection:• VITAPAN LINGOFORM Posterior
VITAPAN LINGOFORM tooth storage• X-small*: 50 Sets / 400 Posteriors • Small*: 100 Sets / 800 Posteriors• Medium*: 200 Sets / 1600 Posteriors• Large*: 300 Sets / 2400 Posteriors
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades.**
*) Note: You will receive the most frequently used moulds and shades with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
ASSORTMENTS AND STORAGE
VITAVM LCIndividualization
Base materialsManufacturer's recommendations
VITACOLLAdhesive bonding
VITAVM CCMasking/Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
three-dimensional, natural moulds
natural shade effects
VITA PHYSIODENS® VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
What?
Benefits?
What for?
FACTS & FEATURES
For lifelike dentures with intricate mould design.
ANTERIOR
• lifelike three-dimensional premium anterior teeth made of MRP composite
• simple reproduction of the natural esthetics due to intricate, lifelike moulds for good integration into the remaining dentition
• good shade integration with natural remaining dentition thanks to excellent shade accuracy to the shade guide
• reliable masking of tertiary structures due to the high (basal) tooth volume
• natural shade effect thanks to integrated 3D shade gradient, surface texture and good light transmission
• excellent durability thanks to high load capacity and abrasion stability
• best solution for partial and hybrid dentures
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA PHYSIODENS®
BASIC INFORMATION
CharacteristicsMould • natural three-dimensional tooth geometry for good integration in
the remaining dentition• lifelike, distinctive incisal characteristics and natural labial
curvature• broad tooth neck for ideal interdental space / papilla modeling • high (basal) volume for masking of tertiary structures
Special features• excellent chromaticity for good masking of tertiary structures• elaborate surface texture for natural play of light• 3D-layered structure for natural shade gradient
Recommended indicationsBest prosthetic solution for: • partial dentures • skeletal frameworks, attachment and bar constructions• Telescopic dentures
Occlusal/setup concept
Especially suited for:BLP (BIO-Logical Prosthetic) according to Dr. E. End
Available shades• 28 x VITA SYSTEM 3D-MASTER® shades
0M1, 0M3, 1M1–5M3 • 15 x VITA classical A1–D4® shades
A1–D4 (without B1)
Available moulds/sets• 21 x upper anterior tooth moulds (divided into four mould groups)• 8 x lower anterior tooth moulds
O1S* O2L O3M O4L O5L O6L
T6S** T2S* T1S T3M T4M* T5M T6L
T7M T8L* T9L
X1M* X2L X3L
Z1S Z2S
L1S* L2M* L3M* L4M* L5M* L6L L7L
L8L
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
OVERVIEW OF MOULDS
ANTERIOR
triangular
rectangular
square
ovoid
*) Bleached shade(s) 0M1 and 0M3 available exclusively for selected mould(s).**) Mould(s) only available in VITA SYSTEM 3D-MASTER shade(s).
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
more product data
4.9
6.3
8.8
13.0
10.4 10.5 9.4 10.4 11.4 10.4
5.2 5.2 5.4 5.5 5.8 5.5
Further information: VITA Prosthetic Solutions mould chart
7.6
7.4
8.8
8.8
8.1 8.7
10.8
10.4
11.0
11.6
9.8 10.1
11.5
10.1
11.6
11.6
10.8
10.2
11.8
13.1
12.7
11.7
11.4
11.3
13.1
11.1 12.4
8.4
8.3
8.7
9.2
8.6
8.7
9.0
9.4
9.0
8.4
9.1
8.8
9.7
8.8 8.9
Upper Anteriors
Lower Anteriors
VITA PHYSIODENS®
VITA PHYSIODENS
VITA PHYSIODENS
O1S L1S 21E 21E
O2L L2M 22E 22E
O3M L3M 23E 23E
O4L L6L 24E 24E
O5L L6L 24E 24E
O6L L8L 25E 25E
T6S L1S 21E 21E
T2S L2M 21E 21E
T1S L1S 20E 20E
T3M L3M 22E 22E
T4M L4M 22E 22E
VITA PHYSIODENS
VITA PHYSIODENS
T5M L3M 23E 23E
T6L L5M 23E 23E
T7M L7L 23E 23E
T8L L5M 24E 24E
T9L L6L 25E 25E
X1M L3M 23E 23E
X2L L4M 23E 23E
X3L L5M 24E 24E
Z1S L1S 21E 21E
Z2S L5M 22E 22E
RECOMMENDED COMBINATIONS
The information contained in the combination table is only intended as a guide and can vary depending on the patient's individual situation.
Combinations according to indicationsFor partial and hybrid dentures• VITA PHYSIODENS Anterior with VITA PHYSIODENS Posterior
upper jaw (UJ) / lower jaw (LJ)
Anterior
Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
42.3 33.0 30.5 32.7
45.7 34.5 32.9 33.7
47.2 36.3 33.5 34.6
49.2 38.2 34.8 36.1
50.1 38.2 34.8 36.1
51.3 43.5 36.7 37.3
41.0 33.0 30.5 32.7
44.9 34.5 30.5 32.7
45.3 33.0 29.4 31.0
45.6 36.3 32.9 33.7
45.6 35.5 32.9 33.7
Anterior
Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
46.2 36.3 33.5 34.6
47,3 37.0 33.5 34.6
47.5 38.2 33.5 34.6
49.0 37.0 34.8 36.1
49.6 38.2 36.7 37.3
46.3 36.3 33.5 34.6
46.2 35.5 33.5 34.6
47.8 37.0 34.8 36.1
44.1 33.0 30.5 32.7
47.5 37.0 32.9 33.7
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA PHYSIODENS mould chartHandy metal case with all moulds for tooth selection:• VITA PHYSIODENS Anterior and Posterior
VITA PHYSIODENS tooth storageAnterior: • X-small*: 67 Sets / 402 Anteriors • Small*: 134 Sets / 804 Anteriors• Medium*: 268 Sets / 1608 Anteriors• Large*: 400 Sets / 2400 Anteriors
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades.**
*) Note: You will receive the most frequently used moulds and shades with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
ASSORTMENTS AND STORAGE
VITAVM LCIndividualization
Base materialsManufacturer's recommendations
VITACOLLAdhesive bonding
VITAVM CCMasking/Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Additional information: Chapter on accessories and components
three-dimensional, natural moulds
excellent durability
VITA PHYSIODENS® VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
What?
Benefits?
What for?
FACTS & FEATURES
For the best reproduction of function due to natural morphology.
POSTERIOR
• natural, three-dimensional premium posterior teeth made of MRP composite
• simple reproduction of the natural chewing functionthanks to natural, three-dimensional moulds with natural morphology
• good shade reproduction with natural remaining dentitionthanks to excellent shade accuracy to the shade guide and broad shade selection
• reliable masking of tertiary structuresthanks to high (basal) tooth volume
• excellent durabilitythanks to high load capacity and abrasion stability
• efficient grinding and polishingdue to optimum material homogeneity and edge stability
• best solution for partial and hybrid dentures
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
more product data
VITA PHYSIODENS®
BASIC INFORMATION
CharacteristicsMould • three-dimensional tooth geometry based on natural tooth dimension• occlusal surfaces/cusp relief according to the natural, fully
anatomical template
Special features• high (basal) volume • Maxillary cusp angle: approx. > 30°
Recommended indicationsBest prosthetic solution for: • partial dentures • model casting, attachment and bar constructions• Telescope and cone constructions
Occlusal/setup concept
Especially suited for:BLP (BIO-Logical Prosthetic) according to Dr. E. End
Available shades• 27 x VITA SYSTEM 3D-MASTER® shades
0M3, 1M1–5M3 • 15 x VITA classical A1–D4® shades
A1–D4 (without B1)
Available moulds/sets• 6 x upper posterior tooth moulds • 6 x lower posterior tooth moulds
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
POSTERIOR
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA PHYSIODENS®
20E 21E* 22E* 23E* 24E* 25E
RECOMMENDED COMBINATIONS
Combinations according to indications:For partial and hybrid dentures• VITA PHYSIODENS Posterior with VITA PHYSIODENS Anterior• See combination table for VITA PHYSIODENS Anterior
OVERVIEW OF MOULDS
*) Bleached shade 0M3 available exclusively for selected mould(s).
Further information: VITA Prosthetic Solutions mould chart
8.3 8.7 9.0 9.8 9.8 9.5
8.9 9.5 9.5 11.1 11.8 11.2
Posteriors
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA PHYSIODENS mould chartHandy metal case with all moulds for tooth selection:• VITA PHYSIODENS Anterior and Posterior
VITA PHYSIODENS tooth storagePosterior:• X-small*: 50 Sets / 400 Posteriors • Small*: 100 Sets / 800 Posteriors• Medium*: 200 Sets / 1600 Posteriors• Large*: 300 Sets / 2400 Posteriors
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades.**
*) Note: You will receive the most frequently used moulds and shades with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
ASSORTMENTS AND STORAGE
VITAVM LCIndividualization
Base materialsManufacturer recommendations
VITACOLLAdhesive
VITAVM CCMasking/Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
BEST VARIETY OF SHADES AND MOULDSFOR ALL CASES.
Solving the most varied cases predictably and reliablyVITA UNIVERSAL PROSTHETIC has been offering proven MRP composite teeth for decades with a variety of shades and moulds to choose from, producing outstanding results in a wide range of patient cases.
VITA
PAN SYNOFORM®
VITAPAN ®
VITA
PAN® CUSPIFORMORM
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
For all cases thanks toa great variety of shades and moulds.
For reliable function in gerontoprosthetics due to flat occlusal surface relief.
For simple reproduction of the chewing function in full/partial dentures.
OVERVIEW OF TOOTH LINESRecommended anterior / posterior combinations
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Gerontoprosthetics
Full/partial dentures/gerontoprosthetics
Full/partial dentures
Posterior
Anterior
Posterior
age-appropriate, distinctive moulds
great variety of shades and moulds
VITAPAN® VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PAN
What?
Benefits?
What for?
FACTS & FEATURES
For all cases thanks to a great variety of shades and moulds.
ANTERIOR
• age-appropriate, universal anterior teeth made of MRP composite
• simple fabrication of age-appropriate full/partial dentures thanks to wide range of, age-appropriate, distinctive tooth moulds
• good shade integration with remaining natural teeth thanks to excellent shade accuracy to the shade guide and wide shade selection
• natural shade effect thanks to integrated 3D shade gradient from the tooth neck to the incisal edge
• excellent durability thanks to high load capacity and abrasion stability
• efficient grinding and polishing due to optimum material homogeneity and edge stability
• Universal solution for full, partial dentures and gerontoprosthetics
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITAPAN®
BASIC INFORMATION
CharacteristicsMoulds
• age-appropriate, distinctive tooth geometry for full/partial dentures • flat, naturally abraded incisal characteristics• narrow tooth neck
Special features• perfect balance between chroma and translucency• harmonious surface structure with maturation characteristics • 3D-layered structure for natural shade gradient
Recommended indicationsBest prosthetic solution for:• Full/partial dentures • Gerontoprostheses• Dentures in cases of limited space
Occlusal/setup conceptSuitable for all established concepts of lingual and balanced occlusion:e.g. according to Gysi, according to Prof. A. Gerber, according toAPF/TIF, according to ABC
Available shades• 28 x VITA SYSTEM 3D-MASTER® shades
0M1, 0M3, 1M1–5M3 • 15 x VITA classical A1–D4® shades
A1–D4 (without B1)
Available moulds/sets• 31 x upper anterior tooth moulds (divided into four mould groups)• 13 x lower anterior tooth moulds
O13 O25 O34 O35 O43 O86 O97
O98* O99
T36* T53 T56 T66 T67 T76* T77*
T88* T98 T99
X13 X66 X77 X87 X96 X99
Z51 Z61 Z74 Z84 Z85 Z97VI
TAPA
NEX
CELL
VITA
PAN
PLUS
VITA
PAN
LIN
GOFO
RMVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PH
YSIO
DEN
SVI
TAPA
N
OVERVIEW OF MOULDS
ANTERIOR
*) Bleached shade(s) 0M1 and 0M3 available exclusively for selected mould(s).
Further information: VITA Prosthetic Solutions mould chart more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
triangular
rectangular
square
ovoid
8.3 8.8 8.68.2 8.7 9.5
8.8 9.6 9.78.7 9.4 10.2
8.1
7.7 8.9
8.7
10.1
9.3 10.1
10.6
9.2
10.1 10.0
10.8
10.0
10.1 12.7
11.1
10.2 10.0 10.4 10.6
8.1
8.9 9.3
9.3
8.3
8.5 9.4
9.0
8.3 8.4 8.5
7.9
9.0
9.5
11.8
9.9
12.5
9.7 9.8 9.4 9.9 11.5
8.1
9.8
8.0 8.0 8.2 8.9 9.0
8.2
Upper Anteriors
VITAPAN VITAPANCUSPIFORM
VITAPANSYNOFORM
O13 L4 40C 40C 10S 10S
O25 L3 40C 40C 10S 10S
VITAPAN®
L3 L5* L5L L7* L9 L11* L13
L15
L4* L8 L10 L12 L14
OVERVIEW OF MOULDS
RECOMMENDED COMBINATIONS
Combinations according to indications:For full and partial dentures:• VITAPAN Anterior in combination with VITAPAN CUSPIFORM PosteriorFor gerontoprosthetics:• VITAPAN Anterior in combination with VITAPAN SYNOFORM Posterior
*) Bleached shade(s) 0M1 and 0M3 available exclusively for selected mould(s).
upper jaw (UJ) / lower jaw (LJ)
5.0
5.7
4.7
8.0
12.2
8.3
9.2
9.8
9.9
9.2
8.7
9.8
9.0
10.9
9.1 8.7
5.2
5.8
5.1
5.9
5.4
6.2
5.6
6.1
5.7 5.6
Lower Anteriors
Fully
ana
tom
ical
incis
al e
dges
Abra
ded
incis
al e
dges
Anterior Posterior Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
41.7 32.7 28.1 29.5 29.0 30.5
42.8 33.4 28.1 29.5 29.0 30.5
VITAPAN VITAPANCUSPIFORM
VITAPANSYNOFORM
O34 L3 41C 41C 11S 11S
O35 L3 41C 41C 11S 11S
O43 L5 41C 41C 11S 11S
O86 L11 42C 42C 12S 12S
O97 L8 44C 44C 14S 14S
O98 L13 42C 42C 12S 12S
O99 L14 45C 45C 14S 14S
T36 L4 40C 40C 10S 10S
T53 L5 41C 41C 11S 11S
T56 L5 41C 41C 11S 11S
T66 L5 42C 42C 12S 12S
T67 L4 42C 42C 12S 12S
T76 L7 42C 42C 12S 12S
T77 L11 42C 42C 12S 12S
T88 L11 44C 44C 14S 14S
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PAN
ANTERIOR
more product data
See the next page for additional combinations.
Further information: VITA Prosthetic Solutions mould chart
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Anterior Posterior Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
43.3 33.4 29.9 31.3 30.0 31.9
43.2 33.4 29.9 31.3 30.0 31.9
43.6 35.3 29.9 31.3 30.0 31.9
47.1 36.9 31.7 33.4 31.1 32.7
49.2 38.9 32.8 34.6 33.1 35.4
48.1 37.0 31.7 33.4 31.1 32.7
52.5 41.7 34.8 36.3 33.1 35.4
43.7 32.7 28.1 29.5 29.0 30.5
44.6 35.3 29.9 31.3 30.0 31.9
44.4 35.3 29.9 31.3 30.0 31.9
44.6 35.3 31.7 33.4 31.1 32.7
45.1 32.7 31.7 33.4 31.1 32.7
45.9 36.2 31.7 33.4 31.1 32.7
46.2 36.9 31.7 33.4 31.1 32.7
47.1 36.9 32.8 34.6 33.1 35.4
VITAPAN®
VITAPAN VITAPANCUSPIFORM
VITAPANSYNOFORM
T98 L15 45C 45C 14S 14S
T99 L11 44C 44C 14S 14S
X13 L4 41C 41C 11S 11S
X66 L9 42C 42C 12S 12S
X77 L11 42C 42C 12S 12S
X87 L11 44C 44C 14S 14S
X96 L10 44C 44C 14S 14S
X99 L15 45C 45C 14S 14S
Z51 L3 43C 43C 13S 13S
Z61 L3 43C 43C 12S 12S
Z74 L9 42C 42C 12S 12S
Z84 L9 42C 42C 12S 12S
Z85 L13 44C 44C 14S 14S
Z97 L12 45C 45C 14S 14S
RECOMMENDED COMBINATIONS
The information contained in the combination table is only intended as a guide and can vary depending on the patient's individual situation.
upper jaw (UJ) / lower jaw (LJ)
Anterior Posterior Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
50.5 38.0 34.8 36.3 33.1 35.4
48.0 36.9 32.8 34.6 33.1 35.4
41.5 32.7 29.9 31.3 30.0 31.9
45.9 36.1 31.7 33.4 31.1 32.7
47.0 36.9 31.7 33.4 31.1 32.7
46.9 36.9 32.8 34.6 33.1 35.4
50.0 39.0 32.8 34.6 33.1 35.4
50.6 38.0 34.8 36.3 33.1 35.4
44.6 33.4 31.0 32.3 31.3 33.9
45.5 33.4 31.0 32.3 31.1 32.7
46.7 36.1 31.7 33.4 31.1 32.7
46.7 36.1 31.7 33.4 31.1 32.7
47.5 37.0 32.8 34.6 33.1 35.4
52.2 41.0 34.8 36.3 33.1 35.4
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PAN
VITAPAN mould chartHandy metal case with all moulds for tooth selection:• VITAPAN Anterior
VITAPAN tooth storage• X-small*: 67 Sets / 402 Anteriors • Small*: 134 Sets / 804 Anteriors• Medium*: 268 Sets / 1608 Anteriors• Large*: 400 Sets / 2400 Anteriors
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades**
*) Note: You will receive the most frequently used moulds and shades with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
Further information: chapter on accessories and components
ANTERIOR
ASSORTMENTS AND STORAGE
VITAVM LC Individualization
Base materials Manufacturer's recommendations
VITACOLL Adhesive
VITAVM CC Masking/Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
pronounced occlu-sal surface relief
excellent durability
VITAPAN® CUSPIFORM VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PAN
For simple reproduction of chewing function for full/partial dentures.
POSTERIOR
What?
Benefits?
What for?
FACTS & FEATURES
• delicate posterior teeth with pronounced occlusal surface relief made of MRP composite
• simple reproduction of the chewing function in full/partial dentures thanks to pronounced occlusal surface relief for well defined centric occlusion and intercuspidation
• excellent durability thanks to high load capacity and abrasion stability
• efficient grinding and polishing due to optimum material homogeneity and edge stability
• Universal solution for full and partial dentures
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITAPAN® CUSPIFORM
BASIC INFORMATION
CharacteristicsMoulds• narrow, delicate tooth geometry for ideal tongue clearance and
effective chewing• pronounced occlusal surface/cusp relief for well defined centric
occlusion and intercuspidation
Special features• Maxillary cusp angle: approx. 15° to 20°• 3D-layered structure for natural shade gradient
Recommended indicationsBest prosthetic solution for: • Full/partial dentures• Dentures in cases of limited space
Occlusal/setup conceptSuitable for all established concepts of lingual and balanced occlusion:e.g. according to Gysi, according to Prof. A. Gerber, according toAPF/TIF, according to ABC
Especially suitable for:buccal occlusal concepts
Available shades• 27 x VITA SYSTEM 3D-MASTER® shades
0M3, 1M1–5M3• 15 x VITA classical A1–D4® shades
A1–D4 (without B1)
Available moulds/sets• 6 x upper posterior tooth moulds (divided into four mould groups)• 6 x lower posterior tooth moulds
40C 41C* 42C* 43C 44C* 45C
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA
PH
YSIO
DEN
SVI
TAPA
NCU
SPIF
ORM
VITA
PH
YSIO
DEN
SVI
TAPA
N
OVERVIEW OF MOULDS
POSTERIOR
*) Bleached shade 0M3 available exclusively for selected mould(s).
RECOMMENDED COMBINATIONS
Combinations according to indications:For full and partial dentures• VITAPAN CUSPIFORM Posterior in combination with VITAPAN Anterior• See combination table for VITAPAN Anterior
Further information: VITA Prosthetic Solutions mould chart more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
7.6 8.0 8.0 8.1 8.7 8.6
7.8 8.4 8.3 8.5 9.1 9.4
Posteriors
VITAPAN® CUSPIFORM
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FTVI
TAPA
NCU
SPIF
ORM
VITA
PH
YSIO
DEN
SVI
TAPA
N
VITAPAN CUSPIFORM mould chartHandy metal case with all moulds for tooth selection:• VITAPAN CUSPIFORM Posterior
VITAPAN CUSPIFORM tooth storage• X-small*: 50 Sets / 400 Posteriors • Small*: 100 Sets / 800 Posteriors• Medium*: 200 Sets / 1600 Posteriors• Large*: 300 Sets / 2400 Posteriors
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades**
*) Note: You will receive the most frequently used moulds and shades with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
ASSORTMENTS AND STORAGE
POSTERIOR
VITAVM LC Individualization
Base materials Manufacturer's recommendations
VITACOLL Adhesive
VITAVM CC Masking / Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
flat occlusal surface relief
excellent durability
VITAPAN SYNOFORM® VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PAN
What?
Benefits?
What for?
FACTS & FEATURES
For reliable function in gerontoprosthetics due to a flat occlusal surface relief.
POSTERIOR
• slender posterior teeth with flat occlusal surface relief made of MRP composite
• simple reproduction of the chewing function in gerontoprostheticsthanks to flat occlusal surface relief for more freedom of movement
• excellent durabilitydue to high load capacity and abrasion stability
• efficient grinding and polishingdue to optimum material homogeneity and edge stability
• best solution for gerontoprosthetics
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITAPAN SYNOFORM®
BASIC INFORMATION
CharacteristicsMoulds
• narrow, delicate tooth geometry for greater tongue clearance• flat, reduced occlusal surface / cusp relief for more freedom
of movement
Special features• Maxillary cusp angle: approx. 6°• 3D-layered structure for natural shade gradient
Recommended indicationsBest prosthetic solution for:• gerontoprostheses
Occlusal/setup conceptSuitable for all established concepts of lingual and balanced occlusion:e.g. according to Gysi, according to Prof. A. Gerber, according toAPF/TIF, according to ABC
Available shades• 15 x VITA classical A1–D4® shades
A1–D4 (without B1)
Available moulds/setups• 5 x upper posterior tooth moulds (divided into four mould groups)• 5 x lower posterior tooth moulds
10S 11S 12S 13S 14S
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
M
OVERVIEW OF MOULDS
POSTERIOR
Further information: VITA Prosthetic Solutions mould chart more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
6.8 7.3 7.8 7.4 8.3
7.5 7.8 8.7 8.3 9.3
Posteriors
‘
VITAPAN SYNOFORM®
RECOMMENDED COMBINATIONS
Combinations according to indications:For gerontoprosthetics• VITAPAN SYNOFORM Posterior in combination with VITAPAN Anterior• See combination table for VITAPAN Anterior
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TA
MFT
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NSY
NOF
ORM
VITAPAN SYNOFORM mould chartHandy metal case with all moulds for tooth selection:• VITAPAN SYNOFORM Posterior
VITAPAN SYNOFORM tooth storage• X-small*: 50 Sets / 400 Posteriors • Small*: 100 Sets / 800 Posteriors• Medium*: 200 Sets / 1600 Posteriors• Large*: 300 Sets / 2400 Posteriors
Available in VITA classical A1–D4® shades**
*) Note: You will receive the most frequently used moulds and shades with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
ASSORTMENTS AND STORAGE
POSTERIOR
VITAVM LC Individualization
Base materials Manufacturer's recommendations
VITACOLL Adhesive
VITAVM CC Masking/Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Solid standard dentures at fair pricesVITA BASIC PROSTHETIC offers you HC-polymer teeth for the economical fabrication of solid, standard provisions for full and partial dentures at a fair price.
COST EFFICIENT, SOLID STANDARD PROSTHETIC.
VITA MFT ®
VITA MFT ®
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
For solid, standard dentures with ideal cost efficiency.
For all concepts of occlusion thanks to multifunctional occlusal surface design.
OVERVIEW OF TOOTH LINESRecommended anterior / posterior combinations
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Full/partial dentures
Full/partial dentures
Posterior
Anterior
multifaceted tooth geometry
natural shade effects
VITA MFT® VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TA
PHYS
IODE
NS
VITA
PAN
VITA
M
FTVI
TAPA
NSY
NOF
ORM
What?
Benefits?
What for?
FACTS & FEATURES
For solid, standard dentures with the best cost efficiency.
ANTERIOR
• Basic anterior teeth for the standard prosthetic made of HC polymer material
• simple reconstruction of a harmonious smile thanks to a versatile, universal tooth geometry
• natural shade effectthanks to integrated 3D shade gradient, good light transmission and surface texture
• good processabilitydue to optimum material homogeneity and edge stability
• for solid standard provisions with full/partial dentures
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA MFT®
BASIC INFORMATION
CharacteristicsMould
• universal tooth geometry and tooth neck contour for a natural appearance
• flat, naturally abraded incisal characteristics
Special features• pronounced enamel portion for good light transmission• nuance-rich surface texture for lifelike play of shade• 3D-layered structure for natural shade gradient
Recommended indications• solid standard solutions for full/partial dentures
Occlusal/setup conceptSuitable for all established concepts of lingual and balanced occlusion:e.g. according to Gysi, according to Prof. A. Gerber, according toAPF/TIF, according to ABC
Available shades• 13 x VITA SYSTEM 3D-MASTER® shades
0M1, 0M3, 1M1–5M3• 4 x VITA classical A1–D4® shades
A1, A3, C3, D3
Available moulds/setup• 12 x upper anterior tooth moulds (divided into four mould groups)• 5 x lower anterior tooth moulds
O40 O44 O49
T41 T43 T46 T49
R42 R45 R47
S47 S50
L33 L34 L37 L37LN* L40
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
M
OVERVIEW OF MOULDS
ANTERIOR
*) L37 tooth geometry with longer tooth neck
Additional information: VITA Prosthetic Solutions mould chart more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
triangular
rectangular
square
ovoid
4.8
8.9 9.2
9.0
10.8 12.0
8.6 9.8 9.8
5.1 5.5 5.5 6.1
7.5
7.5
7.9
10.0
9.4
9.3
10.2
10.3
10.3
11.8
10.2
11.0
11.8
10.5
8.1
8.2
8.2
9.0
8.5
8.5
9.0
Upper Anteriors
Lower Anteriors
VITA MFT®
VITA MFT
VITA MFT
O40 L33 PU29 PL29
O44 L34 PU29 PL29
O49 L40 PU33 PL33
T41 L33 PU29 PL29
T43 L34 PU31 PL31
T46 L37 PU31 PL31
T49 L40 PU33 PL33
R42 L34 PU29 PL29
R45 L37 PU31 PL31
R47 L37 PU33 PL33
VITA MFT
VITA MFT
S47 L40 PU33 PL33
S50 L40 PU33 PL33
RECOMMENDED COMBINATIONS
Combinations according to indications:Solid standard solutions for full and partial dentures• VITA MFT Anterior in combination with VITA MFT Posterior
The information contained in the combination table is only intended as a guide and can vary depending on the patient's individual situation.
upper jaw (UJ) / lower jaw (LJ)
Anterior
Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
40.0 32.6 28.8 29.6
43.9 34.0 28.8 29.6
49.2 39.5 33.0 33.6
40.5 32.6 28.8 29.6
43.3 34.0 30.6 31.1
46.1 36.8 30.6 31.1
48.8 39.5 33.0 33.6
42.1 34.0 28.8 29.6
44.5 36.8 30.6 31.1
46.6 36.8 33.0 33.6
Anterior
Posterior
UJ / No.
mm
LJ / No.
mm
UJ / No.
mm
LJ / No.
mm
46.8 39.5 33.0 33.6
49.7 39.5 33.0 33.6
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TA
PHYS
IODE
NS
VITA
PAN
VITA
M
FTVI
TAPA
NSY
NOF
ORM
VITA MFT mould chartHandy metal case with all moulds for tooth selection:• VITA MFT Anterior
VITA MFT tooth storage2S storage: • 72 sets / 432 Anteriors*• 48 sets / 384 Posteriors*
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades**
*) Note: You will receive the most frequently used moulds and shades with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
ASSORTMENTS AND STORAGE
ANTERIOR
VITAVM LC Individualization
Base materials Manufacturer's recommendations
VITACOLL Adhesive
VITAVM CC Masking/Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
multifunctional occlusal surface design
precisely defined centric
VITA MFT® VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TA
PHYS
IODE
NS
VITA
PAN
VITA
M
FTVI
TAPA
NSY
NOF
ORM
What?
Benefits?
What for?
FACTS & FEATURES
For all concepts of occlusion thanks to multifunctional occlusal surface design.
POSTERIOR
• Basic posterior teeth with multifunctional occlusal surfaces made of HC polymer
• simple setup thanks to the occlusal surface design according to the cogwheel principle
• can be universally and reliably used for all concepts of occlusionthanks to the multifunctional occlusal surface design
• time-saving setupwithout extensive grinding thanks to precisely defined centric
• for solid standard provisions with full/partial dentures
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA MFT®
BASIC INFORMATION
CharacteristicsMould • universal tooth geometry with natural lingobuccal width• multifunctional occlusal surface design with defined centric contacts
Special features• maxillary cusp angle: approx. 15° to 20°
Recommended indications• solid standard provision for full/partial dentures
Occlusal/setup conceptSuitable for all established concepts of lingual and balanced occlusion:e.g. according to Gysi, according to Prof. A. Gerber, according toAPF/TIF, according to ABC
Especially suited for:lingualized occlusal concepts
Available shades• 13 x VITA SYSTEM 3D-MASTER® shades
0M1, 0M3, 1M1–5M1• 4 x VITA classical A1–D4® shades
A1, A3, C3, D3
Available moulds/setup• 3 x upper posterior tooth moulds• 3 x lower posterior tooth moulds
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
M
FTVI
TA
PHYS
IODE
NS
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
M
POSTERIOR
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA MFT®
PU29 – PL29 PU31 – PL31 PU33 – PL33
RECOMMENDED COMBINATIONS
Combinations according to indications:For solid standard solutions• VITA MFT Anterior in combination with VITA MFT Posterior• See combination table for VITA MFT Anterior
OVERVIEW OF MOULDS
Further information: VITA Prosthetic Solutions mould chart
9.5 10.0 10.6
9.0 9.6 10.3
Posteriors
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PAN
CUSP
IFOR
MVI
TA
PHYS
IODE
NS
VITA
PAN
VITA
M
FTVI
TAPA
NSY
NOF
ORM
VITA MFT mould chartHandy metal case with all moulds for tooth selection:• VITA MFT Posterior
VITA MFT tooth storage2S stock:• 72 sets / 432 Anteriors*• 48 sets / 384 Posteriors*
Available in VITA classical A1–D4® and VITA SYSTEM 3D-MASTER® shades**
*) Note: You will receive the most frequently used moulds and shades with the packaged tooth storage. We are also happy to put together storage systems according to your individual specifications.
**) see available shades
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
ASSORTMENTS AND STORAGE
POSTERIOR
VITAVM LC Individualization
Base materials Manufacturer's recommendations
VITACOLL Adhesive
VITAVM CC Masking/Fixation
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Increasing productivity with digital technologyVITA DIGITAL PROSTHETIC unifies innovation, efficiency and precision through custom-fit, coordinated material and CAD/CAM system solutions for full dentures.
EFFICIENT CAD/CAM PROSTHETIC FOR GREATER PRODUCTIVITY.
VITA
VIONIC® BOND
VITA
VIONIC® BASE
VITA
VIONIC® FRAME
VITA
VIONIC® WAX
WAXTATAT
W
TATAT
WAWAW
NDVITATAT ONND
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
DIGITAL PROSTHETIC SOLUTIONS IN OVERVIEW
more product data
Tooth solutions for CAD/CAM.
Solutions for denture bases.
Solutions for bonding.
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
Bonding system
Denture base disc
Wax base disc
Tooth frameVI
TA C
AD
/CAM COMPONENTS
VITA
CAD/CAM MATERIALS
VITA
CAD/CAM TEETH
VITAPAN EXCELL® DD FRAME
VITAPAN® LINGOFORM DD FRAME
VITA VIONIC® FRAME VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
What?
Benefits?
What for?
FACTS & FEATURES
more product data
For the efficient CAD/CAM fabrication of dentures with Ceramill® Motion 2
CAD/CAM TEETH
• VITAPAN EXCELL DD FRAME• VITAPAN LINGOFORM DD FRAME
• simple, digital reconstruction of functionindividual design with appropriate concept of occlusion and skeletal class selectable
• efficient full denture fabricationthrough basal tooth modification by push-button based on the CAD denture design
• process-secure, fully digital CAD/CAM fabricationthanks to a coordinated material system incl. bonding solution
• for the fully digital fabrication of dentures using the VITA VIONIC system solution
CAD
/ CA
M
TEET
HCA
D /C
AM
M
ATER
IALS
CAD
/CA
M
COM
PONE
NTS
VITA VIONIC® FRAME
BASIC INFORMATION
CharacteristicsDD FRAME for Ceramill D-set holder system• used for CAD/CAM processing of denture teeth within a
tooth frame• enables a basal CAD/CAM tooth modification based on the CAD
denture design
Recommended indicationsBest prosthetic solution for:• digital dentures
Occlusal/setup conceptCAD model analysis:Analysis based on TIF with Ceramil D-flow software module
CAD denture setup:VITA-specific coordinated design options enable• the implementation of buccal, lingual occlusal concepts• the incorporation of occlusal positions (normal/cross-bite)• the incorporation of skeletal classes (I+II)
Available shades• 6 x VITA classical A1–D4® shades
A1, A2, A3, A3.5, B3, D3
Available moulds/setsVITAPAN EXCELL DD FRAME• 9 x upper anterior tooth moulds*• 4 x lower anterior tooth moulds*
VITAPAN LINGOFORM DD FRAME• 4 x upper posterior tooth moulds*• 4 x lower posterior tooth moulds*
*) Each upper/lower set has a special frame with embedded denture teeth.
O43 O45 O49
T44 T46 T48 T50
R45 R47
L33 L35 L37 L39
21L 22L 23L 24L
R45R45
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
OVERVIEW OF MOULDS
CAD/CAM TEETH
Further information: VITA Prosthetic Solutions mould chart more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
10.0 10.2 10.8 11.2
9.6 10.0 10.9
triangular
rectangular
ovoid
5.0
8.6 9.0 9.4 9.8
5.2 5.2 5.9
11.0
8.2
9.9
9.1
9.9
11.2
9.7
10.4 11.3
10.9
11.6
7.9
8.1
8.6
8.4
8.2 8.8
9.0
9.2
Upper Anteriors VITAPAN EXCELL® DD FRAME
Lower Anteriors VITAPAN EXCELL® DD FRAME
Posteriors VITAPAN® LINGOFORM DD FRAME
VITA VIONIC® FRAME
RECOMMENDED COMBINATIONS
Combinations according to indications:For digital VITA VIONIC dentures • VITAPAN EXCELL DD FRAME in combination with
VITAPAN LINGOFORM DD FRAME• See combination table for VITAPAN EXCELL
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
N
CUSP
IFOR
MVI
TAPA
NSY
NOF
ORM
VITA
M
FT
• CAD software: Ceramill D-flow software module• CAM hardware: Ceramill Motion 2 (5X) incl. Coolstream• Scanner: Ceramill Map 300/400
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
VITA VIONIC BOND bonding system
SYSTEM COMPATIBILITY
CAD/CAM TEETH
VITA VIONIC BASE denture base disc
VITA VIONIC WAX wax base disc
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA VIONIC® WAX VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
What?
Benefits?
What for?
FACTS & FEATURES
For an efficient CAD/CAM wax setup
CAD/CAM MATERIALS
• Wax disc for the fabrication of wax setups
• comfortable wax try-inthanks to fabrication of complete CAD/CAM denture out of white wax
• precise wax setupthanks to precisely milled molds based on the digital construction
• easy opportunity for correctionsince the wax setup can be modified during the try-in
• for the wax setup and try-in
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA VIONIC® WAX
BASIC INFORMATION
CharacteristicsVITA VIONIC WAX • are shape-stable, temperature-resistant synthetic-wax blanks
Recommended indicationsBest prosthetic solution for:• digital dentures
Available shades• Pink• White
Available geometries• Ø 98.4 mm / H 30 mm
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
CAD/CAM MATERIALS
CAD technology partner for VITA Digital Prosthetic• Amann Girrbach AG• 3Shape AS
VITA VIONIC WAX is available for the systems*:• Ceramill Motion 2 (Amann Girrbach AG)• CORiTEC line (imes-icore GmbH)• Roland DWX line (Roland DG)
*) Validated VITA system partner for the processing of selected VITA VIONIC components.
SYSTEM COMPONENTS
SYSTEM COMPATIBILITY
Additional information: Chapter on accessories and components
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA VIONIC BOND bonding system
VITA VIONIC BASE prosthesis base disc
VITA VIONIC WAX wax base disc
VITA VIONIC FRAME
VITA VIONIC® BASE VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
What?
Benefits?
What for?
FACTS & FEATURES
For efficient CAD/CAM base fabrication
CAD/CAM MATERIALS
• PMMA disc for the fabrication of final denture bases
• efficient base fabricationthanks to CAD/CAM processing without manual flasking and molding
• easily reproducedsince the system enables the reproduction of the base with a mouse click
• excellent fit to the alveolar ridgedue to CAD/CAM technical fabrication of the base without a polymerization step
• for the CAD/CAM fabrication of the denture base
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
CO
MPO
NENT
SCA
D /
CA
M
MAT
ERIA
LS
VITA VIONIC® BASE
CharacteristicsVITA VIONIC BASE• are highly crosslinked, industrially polymerized, monomer-free
PMMA blanks• are homogeneous material blanks with the best shape and
shade stability
Recommended indicationsBest prosthetic solution for:• digital dentures
Available shades• Orange-pink• Deep-pink• Light-pink
BASIC INFORMATION
Available geometries• Ø 98.4 mm / H 26 mm• Ø 98.4 mm / H 30 mm
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
CAD/CAM MATERIALS
CAD technology partner for VITA Digital Prosthetic• Amann Girrbach AG• 3Shape AS
VITA VIONIC BASE is available for the systems*:• Ceramill Motion 2 (Amann Girrbach AG)
*) Validated VITA system partner for the processing of selected VITA VIONIC components.
SYSTEM COMPONENTS
SYSTEM COMPATIBILITY
Additional information: Chapter on accessories and components
VITA VIONIC BOND bonding system
VITA VIONIC BASE denture base disc
VITA VIONIC WAX wax base disc
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
CO
MPO
NENT
SCA
D /
CA
M
MAT
ERIA
LS
VITAPAN EXCELL® DD FRAME
VITAPAN® LINGOFORM DD FRAME
VITA VIONIC® BOND VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
What?
Benefits?
What for?
FACTS & FEATURES
For the secure bonding of VITA denture teeth to the VITA VIONIC Base
CAD/CAM COMPONENTS
• Bonding solution for fixing denture teeth in VITA VIONIC Basis
• efficient adhesive bonding of the denture teeth without complex hot / cold polymerization processes
• precise, seamless fixation of the teeth in the cavityusing a low-viscosity, self-curing bonding system
• secure bond of denture teeth to the basethanks to bonding solution tailored to the material
• for the final bonding of VITA teeth in a milled denture base
more product data
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA VIONIC® BOND
BASIC INFORMATION
CharacteristicsVITA VIONIC BOND• is a MMA-based self-curing two-component bonding system• has a low-viscosity consistency for precise application
to the adhesive surface• forms a reactive boundary layer on the adhesive surfaces
for a secure bond
Recommended indicationsBest solution for:• digital VITA VIONIC dentures
Contents of the VITA VIONIC BOND Kit• VITA VIONIC BOND I, jar, 2 ml• VITA VIONIC BOND II, vial, 1 ml• Microbrush, 3 pcs.
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TA
MFT
VITA VIONIC FRAME
CAD/CAM COMPONENTS
SYSTEM COMPONENTS
Additional information: Chapter on accessories and components
CAD
/ C
AM
TE
ETH
CAD
/ C
AM
M
ATER
IALS
CAD
/ C
AM
CO
MPO
NENT
S
VITA VIONIC BOND bonding system
VITA VIONIC BASE denture base disc
VITA VIONIC WAX wax base disc
System components/accessories
BEST SOLUTIONS FOR CONVENTIONAL DENTURE FABRICATION
• For situational/functional molding, use appropriate impression trays (e.g. from VITA) and impression materials.
• For the shade determination of the remaining dentition, use VITA Easyshade V or a VITA shade guide.
• Use the VITA mould chart after the model analysis of the tooth shape(s) to select the appropriate VITA denture teeth.
• Use appropriate wax and processing tools for the wax setup and chewing simulation.
• For a secure bond of VITA denture teeth to the base materials, use the adhesive agent VITACOLL.
• Use the cold/hot polymerisate recommended by VITA for the fabrication of the base, e.g. using an injection or pressure-packing technique.
• For the fabrication, use suitable polishing instruments and, for individualization, the veneering composite VITA VM LC.
*) Visual or technical shade determination only takes place if there is any remaining natural dentition.
Molding / model fabrication
Shade determination*
Model analysis /mould selection
Wax setup
Bonding
Base fabrication
Finishing
System components/accessories
SYSTEM COMPONENTS VITA PROSTHETIC SOLUTIONS
Base materialsRecommended hot/cold polymerisate for the fabrication of denture bases: ProBase (Ivoclar Vivadent), PalaXpress (Heraeus Kulzer) and FuturaGen (Schütz Dental).
VITACOLL®
Bonding agent for a secure bond of VITA denture teeth made of polymer/composite to the base materials. Recommended for hot polymerisate and mandatory for self-curing/cold polymerisate.
VITAFOL®HSilicone insulation material for the protection of VITA denture teeth during devesting. This also keeps the interdental spaces clean and maintains the gingival contouring.
VITAVM®LCVeneering composite for the individualization of VITA denture teeth for brilliant esthetic results. Available in two consistencies: paste and low viscosity (flow variants).
VITAVM®CCFiller-free cold polymerisate for repairs, for masking of attachments in hybrid dentures and for fixing VITA denture teeth in skeletal framework.
more information
PRO
CESS
, CO
MPO
NEN
TS A
ND
ACC
ESSO
RIES
System components/accessories
BEST SOLUTIONS FOR THE DIGITAL FABRICATION OF DENTURES
• Benefit from the VITA-specific, coordinated selection of occlusal concepts during CAD design of the denture.
• For the fabrication of the wax setup, use the synthetic wax blanks VITA VIONIC WAX.
• For the CAM modification of VITAPAN denture teeth,use the DD FRAME solution.
• For the wax setup, position VITA denture teethin the wax base or make a fully formatted wax setup.
• To fabricate final denture bases, use the PMMA blanks VITA VIONIC BASE.
• For the final bonding of VITA teeth in the denture base, use the bonding system VITA VIONIC BOND.
Scan / CAD design
CAM wax base
CAM denture teeth
Wax setup /try-in
CAM prosthetic base
Bonding /finishing
System components/accessories
SYSTEM COMPONENTS OF VITA DIGITAL PROSTHETIC
VITA VIONIC® WAXShape-stable, temperature-resistant synthetic wax disc for technical CAD/CAM production of wax setups.
VITA VIONIC® BASEHighly crosslinked, industrially polymerized, monomer-free PMMA discs for the technical CAD/CAM production of final denture bases.
VITA VIONIC® BONDMMA-based self-curing, two-component bonding system for the secure fixation of VITA denture teeth in milled, gingiva-colored VITA VIONIC denture bases.
PRO
CESS
, CO
MPO
NEN
TS A
ND
ACC
ESSO
RIES
NOTES
NOTES
NO
TES
VITA
PAN
EXCE
LLVI
TAPA
NPL
USVI
TAPA
NLI
NGO
FORM
VITA
PH
YSIO
DEN
SVI
TAPA
NVI
TAPA
NCU
SPIF
ORM
VITA
PAN
SYN
OFOR
MVI
TAM
FT
Hotline Sales SupportMr. Udo Wolfner and his team (Internal SalesDepartment) will be glad to assist you withorders or questions about the delivery,product data and marketing materials.
Phone +49 (0) 7761 / 56 28 84Fax +49 (0) 7761 / 56 22 99 8:00 a.m. to 5 p.m. CETE-mail: info@vita-zahnfabrik.com
Technical HotlineIf you have technical questions concerning VITA PROSTHETIC SOLUTIONS, you can contact our technical specialists Mr. Ralf Mehlin or Mr. Daniel Schneider.
Phone +49 (0) 7761 / 56 22 22Fax +49 (0) 7761 / 56 24 468:00 a.m. to 5 p.m. CETE-mail: info@vita-zahnfabrik.com
We will be glad to help More information about the products and processing is available at www.vita-zahnfabrik.com
CAD
/ CA
M
TEET
HCA
D / C
AM
M
ATER
IALS
CAD
/ CA
M
COM
PO NE
NTS
VI
TAPAN EXCELL ®
VITA
PHYSIODENS®VI
TA PHYSIODENS
®VITAPAN PLUS ®
VITA
PAN® LINGOFORM
VITA
PAN SYNOFORM®
VITAPAN ®VITAPAN ®
VITA
PAN® CUSPIFORMORM
VITA MFT ® VITA MFT ®
Recommended anterior / posterior combinations
PosteriorAnteriorPosteriorAnterior
Anterior Anterior Posterior Anterior Posterior
PosteriorAnterior
VITA
CAD/CAM MATERIALS
VITA
CAD
/CAM COMPONENTSVITA
CAD/CAM TEETH
VITA
PHYSIODENS®
Manufacturing high-end dentures VITA PREMIUM PROSTHETIC offers you high-value MRP-composite teeth with naturally vivid shape and shade play for the best, highly esthetic full, partial and implant-retained dentures.
Solving the most varied cases predictably and reliablyVITA UNIVERSAL PROSTHETIC has been offering proven MRP-composite teeth for decades with a variety of shades and moulds to choose from, for reliably good results in a wide range of patient cases.
Solid standard prosthetic at fair pricesVITA BASIC PROSTHETIC offers HC-polymer teeth for the economical fabrication of solid, standard provisions for full and partial dentures at a fair price.
Increasing productivity with digital technologyVITA DIGITAL PROSTHETIC unifies innovation, efficiency and precision due to custom-fit, coordinated material and CAD/CAM system solutions for full dentures.
HC polymer
MRP composite
MRP composite
VITA Zahnfabrik H. Rauter GmbH & Co. KGSpitalgasse 3 · D-79713 Bad Säckingen · GermanyTel. +49(0)7761/562-0 · Fax +49(0)7761/562-299Hotline: Tel. +49(0)7761/562-222 · Fax +49(0)7761/562-446www.vita-zahnfabrik.com · info@vita-zahnfabrik.com
facebook.com/vita.zahnfabrik
1025
1E/1
– 0
617
(x)X
- Ve
rsio
n (0
2)
Please note: Our products must be used in accordance with the instruc-tions for use. We accept no liability for any damage resulting from incor-rect handling or usage. The user is furthermore obliged to check the product before use with regard to its suitability for the intended area of applications. We cannot accept any liability if the product is used in con-junction with materials and equipment from other manufacturers that are not compatible or not authorized for use with our product. Furthermore, our liability for the accuracy of this information is independent of the legal basis and, in as far as legally permissible, shall always be limited to the value as invoiced of the goods supplied, excluding value-added tax. In particular, as far as legally permissible, we do not assume any liability for loss of earnings, indirect damages, ensuing damages or for third-party claims against the purchaser. Claims for damages based on fault liability (culpa in contrahendo, breach of contract, unlawful acts, etc.) can only be made in the case of intent or gross negligence. The VITA Modulbox is not necessarily a component of the product. Date of issue of this information: 06.17
After the publication of these information for use any previous versions become obsolete. The current version can be found at www.vita-zahnfabrik.com
VITA Zahnfabrik has been certified in accordance to the Medical Device Directive and the following products bear the CE mark :
VITAPAN® product range, VITA PHYSIODENS®, VITA MFT®, VITA VIONIC® product range, VITACOLL®, VITAFOL® H, VITAVM® LC and VITAVM® CC
For more information on VITA PROSTHETIC SOLUTIONS, see: www.vita-zahnfabrik.com/prosthetics