Post on 06-Feb-2018
VENTE AUX ENCHÈRES PUBLIQUES
Auctionsale after bankruptcy in France
Mardi 15 Décembre 2015 à 14h00
HOTEL DES VENTES435 Boulevard Louis Neltner42000 SAINT-ETIENNE
Pour tout renseignement / For all request : +33 (0)6 78 49 00 74Anglais et Espagnol / English and Spanish : +33 (0)7 81 58 50 40
Tuesday, December 15th 2015at 14.00 p.m
AUCTION ROOM435 Boulevard Louis Neltner42000 SAINT-ETIENNE
Catalogue complet disponible sur notre site internet
Detailed catalogue on our website
www.interencheres.comwww.lutece-industrie.com
Assisté par : Tél. : +33 (0)1 39 56 07 63LUTÈCE INDUSTRIE Mobile : +33 (0)6 82 82 32 08Consultants internationaux en ventes industrielles Fax. : +33 (0)9 70 60 56 6860, rue de Castagnary - 75015 PARIS info@lutece-industrie.com
VENTE EN SIMULTANÉ SURWWW.INTERENCHERES-LIVE.COM
LIVE BIDDING ON THE INTERNET
FABRICATION DE PANNEAUX SOLAIRES MANUFACTURING OF SOLAR PANELSASSEMBLAGE DE COMPOSANTS ELECTRONIQUES ELECTRONICS SURFACE MOUNT ASSEMBLY
443 Rue René Cassin
ZI Molina la Chazotte
42350 La Talaudière
Maître Frédéric BROSSAT - Commissaire Priseur Judiciaire435 Boulevard Louis Neltner, 42000 SAINT-ETIENNE
Tél. : 04 77 21 75 38 - Fax : 04 77 21 65 12 - Email : brossatcpj@wanadoo.fr
1
NOTICE FOR BUYERS The public auction sale is ruled by the General conditions of sale which are at the end of the catalogue, and, besides, by the following ones.
VIEWING
Monday, December 14th 2015 from 9.00 am to 12.00a.m and from 14.00 to 18.00 Tuesday, December 15th 2015 from 8.00 am to 12.00 am
ELIFRANCE
443 Rue René Cassin – ZI Molina la Chazotte 42350 La Talaudière
AUCTION SALE
The auction sale will be held Tuesday, December 15th 2015 at 14h00
Auction Room 435 Boulevard Louis Neltner
42000 SAINT-ETIENNE
By the Ministry of Maître Maître Frédéric BROSSAT Commissaire-Priseur Judiciaire
435 Boulevard Louis Neltner 42000 SAINT-ETIENNE
Buyers are required to fill in the buyer’s card available in the auction room and at the viewing, by writing their complete references, and, auction being cash, to give a signed check at the order of Frédéric BROSSAT and a bank guarantee (model hereafter) if the check is not certified. For the buyers subjugated and identified in an EU state member, write their VAT ID. n° and produce the id. n° given by the administration of their own country. Auctions are made net of tax. The purchaser will pay, in addition to price of adjudication a buyer’s premium of 14,4 % with VAT as well as the VAT of 20 % on the total price.
CLEARANCE OF LOTS Referring article 4 of the general conditions of sale, no clearance will be able without complete and certified payment.
Clearance on working days by appointment with Maître Frédéric BROSSAT From Tuesday, December 16th 2015
Small lots must be removed no later than December 18th 2015 at 17h30 Late removal January 25th 2015 at 18h00
PAYMENT / BANK DETAILS
CIC – Mr Frédéric BROSSAT – Etude de Maître BROSSAT Frédéric Code Banque 10096 - Code guichet 18017 - N° de compte 00043527302 - Clé RIB 30
IBAN FR76 1009 6180 1700 0435 2730 230 – BIC: CMCIFRPP
The translation of the French catalogue is intended only for purpose of understanding: the genuine text in French language is the only one available for legal matter. The conditions of sale in French are detailed in the French catalogue.
2
GUARANTEE OF PAYMENT / BANKBÜRGSHAFT
We, the undersigned Bank / Wir, die unterzeichnete Bank
Address / Adresse
Phone: Fax:
Guarantee the amount of Euros / Garantieren bis zum Betrag von Euros
Being the amount of the bid / die Kaufgeschäfte
By Mister or Miss
Company / Firma
Head Office
Commercial Registration n°
Holder at this bank of account n° / Inhaber des bei uns geführten Kontos
During the auction sale / bei der Versteigerung ELIFRANCE
For payment, Mister/Miss from the company ….....................................................................…………… will establish a check that we guarantee with the above mentioned limits or the payment, with his first written demand on the same conditions, could be done to the account of the auction’s office / Zum Zweck der Zahlung wird unser Kunde entweder einen Scheck ausstellen, den wir bis zur Höhe des oben genannten Betrages garantieren, oder wir werden eine Überweisung auf das Konto des Amtsträgers vornehmen, sabald dieser uns die Rechnung vorlegt.
Maître Frédéric BROSSAT Commissaire-Priseur Judiciaire
435 Boulevard Louis Neltner 42000 SAINT-ETIENNE
Tel : +33(0)4 77 21 75 38 Fax : +33(0)4 77 21 65 12 brossatcpj@wanadoo.fr
Paiement
CIC – Mr Frédéric BROSSAT – Etude de Maître BROSSAT Frédéric Code Banque 10096 - Code guichet 18017 - N° de compte 00043527302 - Clé RIB 30
IBAN FR76 1009 6180 1700 0435 2730 230 – BIC: CMCIFRPP
Done in / Ausgestellt in ................................................, on / am ...................................……………….
Signature / Unterschrift Commercial stamp / Stempel
3
BUYING ORDER
AUCTION SALE : ELIFRANCE, December 15th 2015 at 14h00
NAME : ……………………………………………… FUNCTION ..................................................................
COMPANY :…………………………………………………………………………………………………………………....
ADDRESS : …………………………………………………………………………………………………………………...
ZIP CODE/ TOWN: ……………………………………………………………………………………………………………………
PHONE NUMBER: ………………………………………………. FAX: ……………………………………………………………
BANK : ................................................................................. ACCOUNT NUMBER ....................................
VAT NUMBER : ................................................................................. ......................................................................
Requests Me Frédéric BROSSAT to buy the lots mentioned below for us for the price with VAT (20%) and without fees (14,4 % TTC) maximum written during the auction sale :
ELIFRANCE, December 15th 2015 at 14h00
Undersigned is conversant with the conditions of auction contract. Please find herewith the GUARANTEE OF PAYMENT.
Lot Number
Lot description AMOUNT in Euros excl.
BUYER’S PREMIUM ADJUGED PRICE in Euros
DATE : SIGNATURE :
4
Batch no
Est. Description Brand Type Serial no Year Location
1 200 2 low cabinets, metal, 2 doors and 8 sliding shelves PAROLAI LISTA
Testing zone
2 100 Set of 2 cabinets, 8 units, roll-up doors
Testing zone
3 30 NILFISK Vacuum Cleaner, GD 1000 Series
NILFISK Maintenance
4 80 Facom tool trolley FACOM Maintenance
5 100 Work bench, 4 drawers, with vices Maintenance
6 80 MAPE Grinder MAPE Maintenance
7 100 Shears, blade: 200mm Maintenance
8 300 SYDERIC Pillar Drill, SNC23, n°6663, year 1984
SYDERIC SNC23 6663 1984 Maintenance
9 50 SIMCO ionizers (2 pieces) AEROSTATPC
SIMCO AEROSTATPC Maintenance
10 100 SAM Torque key (2 pieces), 0.6EL and 0-3
SAM Maintenance
11 80 SUPER50 Precision Saw SUPER50 Maintenance
12 50 Cordless drills (1 DEXTER and BOSCH)
Maintenance
13 50 Thermal heaters (3 pieces) Maintenance
14 130 Hilti fastening apparatus, model DX450
HILTI DX450 Maintenance
15 200 Chauvin Arnoux megohmeter, C.A6545
CHAUVIN ARNOUX
C.A6545 Maintenance
16 200 Chauvin Arnoux megohmeter, C.A6545
CHAUVIN ARNOUX
C.A6545 Maintenance
17 100 AZ Heat Cutter, GG2 AZ GG2 Maintenance
18 200 Chauvin Arnoux megohmeter, C.A6543
CHAUVIN ARNOUX
C.A6543 Maintenance
19 150 SEFELEC Dielectric Strength Tester, PR5M, No. 305
SEFELEC PR5M 305 Maintenance
20 100 EUROSTAT Ohmmeter, TOM600 EUROSTAT TOM600 Maintenance
21 250 STRAPEX Strapping Machine, ALLPACK, No. 99051221
STRAPEX ALLPACK 9905122
1 Maintenance
22 200 2 anti-static testers Workshop entrance
23 250 STRAPEX Electric Strapping Machine, No. 50184878, year 2005
STRAPEX 5018487
8 2005 Stock
24 100 Strapping Machine, manual, no manuf. no model, with dispenser
Stock
25 150 ORGAPACK Electric Strapping Machine, OR-T250 with dispenser and 2 strapping coils
ORGAPACK OR-T250 Stock
26 180 Set of 6 ramps SIMCO ionization SIMCO Testing zone
27 200 2 low cabinets, metal, 2 doors and 8 sliding shelves PAROLAI LISTA
Testing zone
28 50 4 tool trolleys Testing zone
29 600 6 workstations Testing zone
5
30 600 6 workstations Testing zone
31 500 5 trolleys 2 trays Testing zone
32 400 4 trolleys 2 trays Testing zone
33 400 4 work tables Testing zone
34 400 4 work tables Testing zone
35 600 6 workstations and 1 tall cabinet Testing zone
37 200 2 workstations and 5 tables (various)
Testing zone
38 150 TESTUT scales, range [1 kg to 30 kg]
Maintenance
41 50 Stepladders: 1 with 7 steps, 1 with 8 steps
Stock
42 300 MIL'S Vacuum pumps, B 300, No. A595, power 5.5 Kw
Testing zone
43 350 Set of 10 socket boxes Workshop
44 300 Set of 10 (approx) rolls of 10 baskets (SOMETO Technifil)
Testing zone
45 400 Room contents, including 7 cabinets and their contents
Maintenance
46 1 500 Contents of floors 1 and 2 of the maintenance workshop
Maintenance
47 100 PRECISA scales, XB 4200C-GB, max. 4200 Kg, mini. 0.5 g
Maintenance
48 100 PRECISA scales, 1000C-3000D, max. 3000 Kg, mini. 5 g
Maintenance
Lots 50 to 63 can be grouped AUTOMATED PRODUCTION
LINE CRYSTALLINE PHOTOVOLTAIC
MODULES Production capacity of 20 MW
4 modules every 7 minutes Panels with 60 and 72 cells
Outputs ranging from 219 to 288 WC
50 250 000
Laying machine Stringer TEAM TECHNIK model Stringer TT1200, No. A00100561, 2011
TEAM TECHNIK
STRINGER TT1200
A00100561
2011 Photovoltaic
line
51 10 000
ABB Robot 6 axes IRB6640 M 2004, No. 66-68839, year 2010 with MARCI lift table , cap 1000kg, enclosure and loading/unloading conveyor
ABB IRB6640M2004 66-68839 2010 Photovoltaic
line
52 2 500 Visual control station with supply conveyor, and with entrance and exit elevator
Photovoltaic
line
53 2 000 Panel turning module with input conveyor
Photovoltaic
line
54 120 000
BURKLE laminator, Easy Lam, E-LAPV HV1-2135-A, No. 0125420110, 2010 with 2 BUSCH vacuum pumps, Cobra NC 400B, and 2 SINGLE heaters, STO 180/1-60-0- D4 / BU, 60 Kw power 2010
BURKLE E-LAPV-
HV12135-A 1254201
10 2010
Photovoltaic line
6
55 15 000 Set of 3 belt conveyors with panels turner
Photovoltaic
line
56 60 000 BERGER Imagesetter, PSS8, No. 1257 power 000W
BERGER Photovoltaic
line
57 6 000 Dark IV Module Tester
Photovoltaic
line
58 2 000 BUS RIBBON Cutting Station, KOMAX, ADS115
BUS RIBBON
KOMAX ADS115 Photovoltaic
line
60 20 000
TRIULZI washing machine, SX1610.6.3.4 No. DODC40088, 2010 with IDROTECHNICA osmosis unit, IDRO RO 500, No. 11884/10 flow 500 L / h
TRIULZI SX1610.6.3.4 DODC40
088 2010
Photovoltaic line
61 600 HYMO Lift Table, cap 3000kg, width. 1.20m, 2m long
HYMO Photovoltaic
line
62 300 MARCO Lift table, capacity 1000kg, width 800mm, 1200mm long
Photovoltaic
line
63 15 000 PASQUATO SNC knife cutting machine, TTP EVA, No. 629, year 2010, width 2m
PASQUATO SNC
TTP EVA 629 2010 Photovoltaic
line
65 1 200
Test pillar with LLOYD INSTRUMENTS extensometer, LF PLUS, No. 01 / LFLS / ILXA / EU, year 2006 with AXIOHM mini printer (A711)
LLYOD INTRUMEN
TS LF PLUS
01/LFLS/ILXA/EU
2006 Photovoltaic
line
66 3 500
Automatic control by DELTEC VISION image analysis, DV.TEC.3000 AA No. 10093 with associated IT
DELTEC VISION
DV.TEC.3000 AA
10093 Parts
storeroom
67 2 000 VISION ENGEENERING Microscope (VS8)
VISION ENGEENER
ING VS8
Parts storeroom
68 20 000
PASAN Cell tester, CTS LAB 606 with PELLETIER work table, flash counter, PASAN BV67-5 module, two BV 67-14 modules, one BV 67-25 module, one BV 67 module, one BV 67-29 module, one HP CPU, 2 LCD ACER screens (17 inches)
PASAN CTS LAB 606 Parts
storeroom
69 200 CETIM, year 1991, 100 X 100cm steel foot
Parts
storeroom
80 5 000 Approx. 12 boxes of 500 SOLLAND cells, S 20 156PS200-10CO
Stock
81 500 14 reels of string (2.40 x 0.15mm), 5 reels of string 1.70 x 0.15mm
Stock
82 3 000
Batch of 6 pallets, aluminum profile, 1000 pieces, length 1655 mm; 5 pallets, aluminum profile, 1000 pieces; 15 cartons of FILM BACK MLP μ 185, height 1020 mm; 60 cartons with junction boxes, approx 40 cartons of TESA, double-sided, width 19mm
Stock
83 5 000
Batch of 18 pallets of glass (DUCATT - ref. COLD2), thickness 3.2 mm, length 1647 mm, width 991 mm, polishing C 1.5
Stock
85 8 400
Batch of solar panels, maximum power 250 Wp, open circuit voltage 37.78 V; Short Circuit current 8.80 A
Photovoltaic
line
7
CMS Line No. 1 - Lots 100 to 106
can be grouped
100 500 ASYS Loader, model AES 03D, No. 502, 2000
ASYS AES 03D 2000
Container, materials
handling and storage zone
101 300 ASYS copper destacker - model LSB 03, No. 228
ASYS LSB 03 228
Container, materials
handling and storage zone
102 3 000 COOKSON Silkscreen Unit, model UP3000 / A, No. U0899, MYDATA SPEEDLINE UltraPrint VPM 3000
COOKSON
SPEEDLINE VPM
ULTRAPRINT 3000
Container, materials
handling and storage zone
103 10 000
MYDATA Component Assembly Unit, model MY19L1, No. 19119, 19 slots, year 2000 with two MYDATA motorized conveyors and stacker and MYDATA stacker, TEX, automatic
MYDATA MY19L1 2000
Container, materials
handling and storage zone
104 3 000
DYAMANT Inspection Center, model VI 3000, No. 8108, 2000 with conveyor and computer station
DYAMANT VI 3000 2000
Container, materials
handling and storage zone
105 5 000
HELLER reflow oven EXI 1912, No. 0406F2-A7B3-81025-03, year 2006, capacity 500 x 130 + IBM Screen
HELLER 1912 EXI 2006
Container, materials
handling and storage zone
106 500 ASYS Output Stacker, model AMS 030, No. 503, 2000
ASYS AMS 030 503 2000
Container, materials
handling and storage zone
CMS Line No. 2 - Lots 110 to 115
can be grouped
110 500 DYAMANT INDUSTRY Destacker DYAMANT INDUSTRIE
Container, materials
handling and storage zone
111 3 000 Silkscreen Center SPEEDLINE MPM UltraPrint 3000 model UP3000 / A, No. U0901
SPEEDLINE MPM
UP3000/A U0901
Container, materials
handling and storage zone
112 4 000
MYDATA mounting unit of components, such MY9, No. 5081, 2000, 9 slots with 2 conveyors and stacker 1
MYDATA MY9 5081 2000
Container, materials
handling and storage zone
113 6 000
MYDATA Component Assembly Unit, model MY12, No. 13101, year 2000, 12 slots with 2 conveyors and 1 stacker
MYDATA MY12 13101 2000
Container, materials
handling and storage zone
114 5 000 HELLER reflow oven 1809 EXL, No. 0405F2-A783-8329-03, 2005
HELLER 1809EXL 0405F2-A783-
8329-03 2005
Container, materials
handling and storage zone
115 500 ASYS output module model AMS04
ASYS AMS04
Container, materials
handling and storage zone
CMS Line No. 4 - Lots 120 to 122
can be grouped
120 3 000 Screen printing center SPEEDLINE MPM UltraPrint 3000, No. U0900
SPEEDLINE MPM
ULTRAPRINT 3000
U0900
Container, materials
handling and storage zone
8
121 3 000 Screen printing center SPEEDLINE MPM model AP / B, No. 10090
SPEEDLINE MPM
AP/B 10090
Container, materials
handling and storage zone
123 6 000
MYDATA Component Placement Machine, model MY15, No. 15101, year 2001, 15 slots with 2 motorized conveyors
MYDATA MY15 15101 2000
Container, materials
handling and storage zone
124 3 000 DYAMANT VI 3000 optical inspection center
DYAMANT VI 3000
Container, materials
handling and storage zone
125 6 000
MYDATA Component Placement Machine, model MY15, No. 15093, year 2000, with 2 motorized conveyors
MYDATA MY15 15093 2000
Container, materials
handling and storage zone
126 3 000 BTU Reflow Oven, model Paragon 150
BTU PARAGON 150
Container, materials
handling and storage zone
127 500 Output Module Stacker ASYS AMS 03D, No. 019796, year 2005
ASYS AMS03D 19796 2005
Container, materials
handling and storage zone
128 10 000 Inspection Center CYBEROPTIC model SE 300 3D detection
CYBEROPTIC
SE300
Container, materials
handling and storage zone
CMS Line No. 3 - Lots 130 to 134
can be grouped
130 500 FUJI Destocker, model MNCE 4050B, No. FNE0008, year 1997
FUJI MNCE FNE0008 1997
Container, materials
handling and storage zone
131 3 000 Screen printing center SPEEDLINE MPM UltraPrint 3000 model UP3000 / A, No. U0926
Container, materials
handling and storage zone
132 10 000 MYDATA MY19 Component Placement Machine, No. 19115, year 2000, 19 slots with stacker
MYDATA MY19 19115 2000
Container, materials
handling and storage zone
133 3 000 BTU Reflow Tunnel, model Paragon 150, No. SCF-37 with conveyor
BTU PARAGON 150 SCF-37
Container, materials
handling and storage zone
134 5 000 MYDATA TP18 assembly unit, year 1992
MYDATA TP18 1992
Container, materials
handling and storage zone
135 2 000 Lot of 10 Agilis feeders, model LM8
Container, materials
handling and storage zone
136 2 000 Lot of 10 Agilis feeders, model LM8
Container, materials
handling and storage zone
137 1 000 Lot of 5 Agilis feeders, model LM116
Container, materials
handling and storage zone
9
138 2 000 Set of feeder supports
Container, materials
handling and storage zone
139 4 000 Set of 73 media feeders
Container, materials
handling and storage zone
140 3 000
End-of-Line Inspection Center No. 8135, year 2000 with input and output conveyor and inspection bench
8135 2000 Soldering
zone
141 3 000
VI TECHNOLOGY optical inspection unit, model VI 3000, No. 04030188, 2004 with input and output motorized conveyor and output table
VI TECHNOLO
GY VI 3000 4030188 2004
Soldering zone
142 10 000 X-ray control unit, PHEONIX X RAY model INSPECTOR PCBA 130, No. IN501C8000-52103, 2003
PHEONIX X RAY
PCBA INSPECTOR
130
IN501C8000-
52103 2003
Soldering zone
143 25 000 TAKAYA mobile sensor test unit, model ITOCHU APT9400CE No. VOF08031, 2000
TAKAYA ITOCHU
APT9400CE VOF080
31 2000
Soldering zone
144 25 000
TAKAYA mobile sensor test unit, TOCHU APT9401CE, n° V2F22080, year 2002 with printer STAR DP8340
TAKAYA ITOCHU
APT9401CE V2F2208
0 2002
Soldering zone
145 20 000
Solder Machine ERSA, model SELECTIVE WAVE, model VERSAFLOW 50/60, No. 04J0160-S005B, year 2004, with extraction and filtering unit (PUREX)
ERSA VERSAFLOW
50/60 S005B-04J0160
Soldering
zone
146 10 000 Solder Machine SOLTEC WAVE, model 6622CC, No. 0005611801, year 2000, with input conveyor
SOLTEC 6622C 5611801 2000 Soldering
zone
147 10 000
Solder machine (VITRONICS SOLTEC), model 6622CC, No. 0112676701, year 2001 with filtering extractor (PUREX), year 2007, input conveyor
VITRONICS SOLTEC
6622C 1126760
1 2001
Soldering zone
148 10 000
Varnishing line with: - Motorized input module - Robot (ASYMTEK), model C740 - Conveyor with inspection cage (UV) - Conveyor oven (THERMATECH) length 2,5m - Exit belt with ventilated inspection cage (UV) - Product cabinet (4 doors) - 2 ovens - 2 extractors
Soldering
zone
149 500 Stencil cleaner (MBTECH), model N29SA2
Technical
room
150 200 Soldering machine (ZEVAC), model MINI WAVE, model SSM 9 with digital display, foot control and table
ZEVAC MINI VAGUES SSM9 Soldering
zone
10
151 250
Unit has: - Duburring and Tinning with two containers (WAVE SERVICES), model PAD500 ROHS, year 2007 - Solder machine (ZEVAC), model MINI WAVE, model SSM4 with steel bench and extraction hood
ZEVAC VAGUES
SERVICES PAD500ROHS
2007 Soldering
zone
155 300 Component sealer (DIMA), model Handytaper
DIMA HANDYTAPER Soldering
zone
156 700
Mini CNC milling center Colinbus model LAB FLEX-30 / HF, 2008. Table 70 x 50cm approx. 278x / 360 Y / Z 70mm 60 000 rpm. Plexiglas cage aluminum chassis, rolling metal tube structure.
COLINBUS LABO FLEX-
30/HF 2008
Soldering zone
157 350
Finishing station with: - Modular stereomicroscope (LEICA MZ6), fixed foot, Zoom FINETECH RV1+WATEC 202D IRIS focus+ camera WATEC 23152, heater, 2 heat modules FINETECH RB11 1600W - Module FINETECH solver removal - Module FINETECH reflow removal - Module FINETECH placer control- Module FINETECH hot air bottom heating - Small scanner of thermal profile (ECD MOLE) - ELECO air flow rate controller
Soldering
zone
158 200
Configuration: rotary table (XY), color camera, opticals (right and oblique), HP Vectra central unit, standard screen CTX 19-inch and selection of accessories (soldering irons, foot pedal)
ERSA ERSASCOPE Soldering
zone
159 400
Configuration: - 2 shears (LOUPO) 2mm et 3mm - 5 heat scissors (CAB), Hektor 2 (3 pieces) and Hektor 3 (1 piece) - STRECKFUSS lead shear (model 057) - With table and accessories
Soldering
zone
160 1 500
Connector placement machine (AMP), model ACTION-PIN, n° 677-427-1, pneumatic, year 1996, mobile fame table with bench, steel foot, composite top
AMP ACTION -PIN 677-427-
1
Soldering zone
161 400 Board testing Interface (NMTC) Soldering
zone
162 200 Forming and Cutting bench (OLAMEF), model MOT/98/A, n°121955
OLAMEF MOT/98/A 121955 Soldering
zone
163 200 Performing machine (STRECKFUB), model C066/M, n°85.12 238
STRECKFUB
C066/M 85.12 238
Soldering
zone
164 200 Cutting bench (EBSO), model EBSOMAT 40-2
EBSO EBSOMAT 40-
2
Soldering zone
165 200 Cutting bench (BURST & ZICK), model C042, n°00.12.804E, year 2000
BURST & ZICK
C042 00.12.80
4E 2000
Soldering zone
11
166 100 Manual shaping and cutting bench (OLAMEF), model TP6/1, n° 182010, year 2007
OLAMEF TP6/1 182010 2007 Soldering
zone
167 100 Manual shaping and Cutting bench (OLAMEF), model TP6/1, n° 191010, year 2008
OLAMEF TP6/1 191010 2008 Soldering
zone
168 100 Cutting bench (CUTBEND), model VB
CUTBEND VB Soldering
zone
169 300 2 Die-Cutting machines (EMG PRESSES) with jig and table
EMG PRESSES
Soldering
zone
170 400 Batch of 6 Die-Cutting machine (COMATEL) with table
COMATEL Soldering
zone
171 300 2 PCB separators (MAESTRO), model 2M with table and riveter
MAESTRO 2M Soldering
zone
172 4 000 Dispensing robot (I&J FISNAR), model I&J7400C-R, n°234.005, year 2007
I&J FISNAR I&J7400C-R 234.005 2007 Soldering
zone
173 150 Counter CMS-4 ABA ELECTRONQUE
ABA ELECTRON
IQUE Testing zone
174 150 Counter CMS-4 ABA ELECTRONQUE
ABA ELECTRON
IQUE Testing zone
175 150 Counter CMS-4 ABA ELECTRONQUE
ABA ELECTRON
IQUE Testing zone
176 150 Counter CMS-4 ABA ELECTRONQUE
ABA ELECTRON
IQUE Testing zone
177 150 Horizontal counter (OLAMEF), model 8301101, n°111902, year 2000
OLAMEF 8301101 111902 2000 Testing zone
178 100 2 Counters (OLAMEF) Testing zone
179 100 2 Counters (OLAMEF) Testing zone
180 8 000 Tester AGILENT, model 3070 series 3
AGILENT 3070 Série 3 Testing zone
181 4 000 Tester HP, model HP 3070, series 3
HP 3070 Série 3 Testing zone
182 3 000 Tester GENRAD, N°22871-339, year 2008
GENRAD 22871-
339 2008 Testing zone
183 1 500 Tester GENRAD, N°22871-339, year 2004
GENRAD 22871-
339 2004 Testing zone
184 10 000 Tester TERADYNE, model SPECTRUM 8800 series, n°8855-058
TERADYNESPECTRUM 8800 Séries
8855-058 Testing zone
185 400 Vacuum pump (MIL'S), model ROTOMIL'S with vertical tank
MIL'S ROTOMIL'S Testing zone
186 300 Inspection Center (CYBEROPTIC), model LSM2
CYBEROPTIC
LSM2 Testing zone
187 3 000 30 GENRAD boards (approx.) and miscellaneous parts
Testing zone
188 1 200 12 boards (approx.) for test bench (HP3070)
Testing zone
189 300 6 Test Heads (GENRAD) Testing zone
190 250 5 Test Heads (HP3070) Testing zone
191 150 Set of spares for ICT Test Head: hands, sleeves - All sizes, forms and strengths
Testing zone
12
192 300 Set of sensors (JTAG) Temento, Microchip, Altera
Testing zone
195 4 000
Climate chamber (CLIMATS), model EX7728-HE, No. 7236, year 2006 - width. 850mm, height 900mm, depth 900mm
oven room
196 4 000
Climate chamber (CLIMATS), model EX7728-HE, No. 7136, year 2006 - width 850mm, height 900mm, depth 900mm
oven room
197 3 000 Climate chamber (CLIMATS), model 760M30/3 - width. 850mm, height 850mm, depth 900mm
oven room
198 800
Climate chamber (SHEL LAB), model 1465-2CE, No. C800501 - width. 450mm, height 450mm, depth 550mm
oven room
199 500
Steaming CLIMATS model XU686, No. 7503, 2007. Max 200 ° C, power 6 2kW - width 660mm, height 1400mm, depth 700mm
oven room
200 600
Oven Memmert, model ILE800 No. G800.0074, 4800W power, temperature 220 °C, Width 1000m, height 1200mm, depth 530mm
MEMMERT ILE800 G800.00
74 Testing zone
201 200
Dry cabinet (DR.STORAGE), model X2E-240, No. AA08112223. Width 550mm, height 530mm high, depth 520mm
DR.STORAGE
X2E-240 AA08112
223
Container, materials
handling and storage zone
202 200
Dry cabinet (DR.STORAGE), model X2E-240, No. AA07102297. Width 500mm, height 500mm, depth 400mm
DR.STORAGE
X2E-240 AA07102
297
Container, materials
handling and storage zone
203 200
Dry cabinet DR.STORAGE, X2E-240 model No. BA07122269. Width 500mm, height 500mm, depth 400mm
DR.STORAGE
X2E-240 BA07122
269
Container, materials
handling and storage zone
204 200
Dry cabinet DR.STORAGE, X2E-240 model No. BA07122268. Width 500mm, height 500mm, depth 400mm
DR.STORAGE
X2E-240 BA07122
268
Container, materials
handling and storage zone
205 500
Oven (MEMMERT), model ILE800 No. G800.0073, 4800W power, temperature 220 °C, Width 1000m, height 1200mm, depth 530mm
MEMMERT ILE800 G800.00
73 Testing zone
206 500 Oven CLIMATS, Width. 670mm, height 1400mm, depth 700mm
CLIMATS Testing zone
207 200 Oven, no manuf., no model. Width 700mm, height 1200mm, depth 400mm
Testing zone
208 300 Oven (CLIMATS). Width 700mm, height 1440mm, depth 600mm
CLIMATS Testing zone
209 200 Oven (HERAEUS INSTRUMENTS), model T6030, No. 51000023, max temperature 250°C. Width 350mm, height 200mm, depth 350 mm
HERAEUS INSTRUME
NTS T6030
51000023
Testing zone
210 1 500 Oven (MPC), model SE79, No. 26001, year 1996. Width 780mm, height 1400mm, depth 600mm
MPC SE79 26001 1996 Testing zone
13
211 300
Oven (MEMMERT), model ULP500 No. 9597.0164, max temperature 300 ° C, power 2000W width. 550mm, height 470mm high, depth 360mm
MEMMERT ULP500 9597.016
4 Testing zone
212 300 Dry cabinet (DR.STORAGE), model X2E-315, No. BA07102212. Width. 850mm, height 800mm, depth 380mm
DR.STORAGE
X2E-600 BA07102
212 Testing zone
213 500 Dry cabinet (DR.STORAGE), 3 levels, model X2E-600, No. CA08052265. Width 550mm, height 450mm, depth 500 mm
DR.STORAGE
X2E-600 CA08052
265
Container, materials
handling and storage zone
214 500 Dry Cabinet (DR.STORAGE), model X2E-600, No. CA08052266. Width 550mm, height 450mm, depth 500 mm
DR.STORAGE
X2E-600 CA08052
266
Container, materials
handling and storage zone
215 800 Vacuum bagging FRANCO PACK model AUDIONVAC VM 201, 1999 50x50cm size
FRANCO PACK
AUDIONVAC VM 201
1999
Container, materials
handling and storage zone
216 1 200 Bagger FRANCO PACK model VM201G, No. 2010040267, 2000
FRANCO PACK
VM201G 2010040
267 2000
Container, materials
handling and storage zone
217 300 Bagger (BOSS), model NT1 / 46N, No. 051147
BOSS NT1/46N 51147 Kardex zone
218 200 Dry cabinet (SUPER DRY). Width. 800mm, height 800mm, depth 650mm
SUPER DRY
Kardex zone
219 600 Dry cabinet
Testing zone
225 3 500 Washer MBTECH card model NC25
Testing zone
226 2 000 Washer KERRY cards, model SC 1000, No. 60151-2-16-301
Testing zone
227 1 000 Washing machine LANCER model 1300 PCB with demineralization station LANCER
Testing zone
228 1 200 Machine to dry LANCER model 13 PCB Lab SEC
Testing zone
229 1 500 AQUEOUS machine, SMT model 1000-1D, No. 7538, 2006
Testing zone
235 400 Precision diamond saw LDWS ESCIL model W 6234
Testing zone
236 300 Workstation ZEVAC model DRS24
Testing zone
237 300 Bay with oscilloscope, model 475, voltmeter HP, model 3456A, and various
Testing zone
238 100 Tektronix Oscilloscope model TDS784C
Testing zone
239 400 Electron microscope cross table with VISION
Testing zone
14
240 600
Electron microscope MICROELECTRONICS model MX 5030RZ; Lens Hirox AD-5030RLM-S Mount; Light source Hirox KH 1000 HI SCOPE cross table with microscope stand; Hirox MX 2525C with wheel; CPU DELL OPTIPLEX GX1, IYAMA monitor; LS902UT vision Masters 1451 19 inches, Monitor JVC TM-90 PSN 45W
MICROELECTRONIQU
E MX 5030RZ Testing zone
241 500 UNION electronic microscope with color camera CP410 PANASONIC WV 75 ohms with 4.7kW microscope stand
UNION Testing zone
242 300 KINETIC SYSTEM vibrating table, model VIBRAPLANE
KINETIC SYSTEM
VIBRAPLANE Testing zone
243 200 3 Multimeters HP, model 3478A HP 3478A Testing zone
244 300 LCR Meter HP, 20MHz-1mhz guy with HP 16034E test fixture Module
HP Testing zone
245 150 3 HP Multimeters HP Testing zone
246 1 500 HP spectrometer, model 3588A HP Testing zone
247 100 Tektronix Oscilloscope model 11801C
TEKTRONIX
Testing zone
248 100 HP frequency meter, model 5316B HP Testing zone
249 1 500 Microscope RANK XEROX, PANASONIC No. M264220 with camera CCD
RANK XEROX
M264220 Testing zone
250 400 FICOSA Tester model X400SVWX350X202
FICOSA X400SVWX350
X202 Testing zone
251 2 000 Wiring Tester model Synor 4200 Testing zone
252 100 2 MOLE Cases for temperature measurement and profile
MOLE Testing zone
253 200 SIMCO electrostatic funnel model EA2
SIMCO EA2 Testing zone
254 200 DOGA cutting measurer model 2641C
DOGA 2641C Testing zone
255 200 Set of 4 stabilized power supplies Testing zone
256 500 Laser power SPECTRON LASER SYSTEM Compatible shutter CW60
SPECTRON LASER
SYSTEM CW60 Testing zone
257 300 3 SIMCO electrostatic controllers, ELCOWA and ION SYSTEMS
Testing zone
258 3 000 Contaminomètre METRONELEC model CT1000
Testing zone
259 2 000
NATIONAL INSTRUMENTS test bench, model NI PXI-1042 with NIPXI-2503 card and various accessories
Testing zone
15
260 150
Batch with: - 2 sliding calipers, digital (STAINLESS), 0 to 500mm - sliding caliper, digital (0 to 300mm) - sliding caliper (0 to 650mm) - sliding caliper (0 to 300mm) - Height gauge (TUTOYO) from 0 to 300mm
Testing zone
261 150
Batch with: - 3 comparators (75 to 100mm; 25 to 50mm; 0 to 25) - 3 gauges - 2 comparators (miscellaneous)
Testing zone
262 150 Batch of 3 gauge boxes (JMC) and 1 box of precision wedges
Testing zone
270 300 Batch of 3 binoculars OPTIKA, model SZ6745
OPTIKA Testing zone
271 300 Batch of 3 binoculars OPTIKA, model SZ6745
OPTIKA Testing zone
272 300 Batch of 3 binoculars LEICA LEICA Testing zone
273 300 Batch of 3 binoculars Testing zone
274 300 Batch of 3 binoculars ZEISS, model STEMI 2000
ZEISS Testing zone
275 300 Batch of 3 binoculars LEICA, model MS5
LEICA Testing zone
276 300 Batch of 3 binoculars LEICA, model MS5
LEICA Testing zone
277 400 Batch of 4 binoculars ZEISS, model STEMI 2000
ZEISS Testing zone
280 150 Rework System (ERSA), model IR500A
ERSA Testing zone
281 150 Rework System (ERSA), model IR500A
ERSA Testing zone
282 100 Digital Preheating Plates (WELLER), model WHP 3000 (2 pieces)
WELLER Testing zone
283 100 Digital Preheating Plates (WELLER), model WHP 3000 (2 pieces)
WELLER Testing zone
284 100 Digital Preheating Plates (PDR), model IRP500 (2 pièces)
PDR Testing zone
285 100 Digital Preheating Plates (METCAL & PACE) (2 pieces)
Testing zone
286 500 Soldering Station (METCAL), model PW1 SP 20 with table (5 pieces)
METCAL Testing zone
287 500 Soldering Station (METCAL), model STSS PS2V 02 with table (5 pieces)
METCAL Testing zone
288 500 Soldering Stations (METCAL), model STSS PS2V 02 with table (5 pieces)
METCAL Testing zone
289 500 Soldering Stations (METCAL), model MX 500P 21 with table (5 pieces)
METCAL Testing zone
290 200 Soldering Stations (METCAL), model MXPS5200 with table (2 pieces)
METCAL Testing zone
291 400 Soldering Station (WELLER), model WMD-3 with table (4 pieces)
WELLER Testing zone
16
292 300 Soldering Stations (OKI), model PS900, 90W (3 pieces)
OKI Testing zone
293 200 Soldering Station (WELLER), model WHA-2000 820W
WELLER Testing zone
294 300 2 Soldering Stations (WELLER), model MT1500, 130W with plate
WELLER Testing zone
295 200 2 Soldering Stations (JBC), model Advanced JT7000, 900W
JBC Testing zone
296 150 Soldering station (OKI), model Smartheat MFR PS2K 75W No. 006605
OKI Testing zone
297 300 3 Soldering Stations (WELLER), PACE
Testing zone
298 250 Thermal strippers (TMC), PB150M No. 20M0984, 2006 with JBC station
Testing zone
299 500 5 Dosing Modules (EFD)
Testing zone
300 250 Dosing module (LOCTITE), model 97006
Testing zone
301 250 Ultrasonic Scalpel NSK, model 80, No. 017768
Testing zone
302 300 Ultrasonic Scalpel TMC model 203
Testing zone
304 100 2 screwdrivers ELIZA model ELI15
Testing zone
305 500 5 precision screwdrivers DELVO DELV73
Testing zone
306 500 5 precision screwdrivers DELVO DELV73
Testing zone
307 500 5 precision screwdrivers DELVO DELV73
Testing zone
308 400 4 precision screwdrivers DELVO DELV73
Testing zone
309 300 About 20 drives without screwdrivers
Testing zone
310 250
Dolly with PACE module, model ST450 with Fume Extraction System (PACE), model ARLM EVAC 250
Testing zone
311 100 Fume Extraction System (BOFA), model SYSTEM400
Testing zone
312 100 Fume Extraction System (BOFA), model SYSTEM401
Testing zone
313 100 Fume Extraction System (BOFA), model SYSTEM402
Testing zone
314 100 Fume Extraction System (BOFA), model SYSTEM403
Testing zone
315 100 Fume Extraction System (BOFA), model SYSTEM404
Testing zone
316 100 Fume Extraction System (BOFA), model SYSTEM405
Testing zone
317 100 Fume Extraction System (BOFA), model SYSTEM406
Testing zone
318 100 Fume Extraction System (BOFA), model SYSTEM407
Testing zone
319 100 Fume Extraction System (PACE) Testing zone
320 100 Fume Extraction System (PACE) Testing zone
17
321 100 Fume Extraction System (PACE) Testing zone
322 100 Fume Extraction System (PACE) Testing zone
323 100 Fume Extraction System (PACE) Testing zone
324 100 Fume Extraction System (PACE) Testing zone
325 100 Fume Extraction System (PACE) Testing zone
326 100 Fume Extraction System (PACE) Testing zone
327 100 Fume Extraction System (PACE) Testing zone
328 100 Fume Extraction System (PACE) Testing zone
340 300 2 Printers BRADY labels 600X-PLUS-E model
Testing zone
341 300 2 Printers BRADY labels 600X-PLUS-E model
Testing zone
342 300 2 Printers BRADY labels 600X-PLUS-E model
Testing zone
343 500 4 Printer ZEBRA labels, such Z4M Testing zone
344 450 3 Label Printers: ZEBRA Z4000; ZEBRA z6000; PUBADRESSE
Testing zone
345 300 2 label printers (ZEBRA), model 110XiIII +
Testing zone
346 300 2 Label Printers: BRADY BP-PR600 + A4 + / 300
Testing zone
400 2 000
Vertical storage carousel (KARDEX), model INDUSTIEVER 105, No. IND 105 2510 6. Max. total load 2 tons. Load per tray 300 K, Width 250cm
KARDEX INDUSTIEVER
105 IND 105 2510 6
Kardex zone
401 3 000
Vertical storage carousel (ELECTROCLASS), model G60 16P / 17 "50 / H4540, 2001, No. 01M1624 series, Max load per tray. 250Kg, width approx 300cm with set of component trays
ELECTROCLASS
G60 16P/17" 50/H4540
01M1624 2001 Kardex zone
402 1 000
Vertical storage carousel (HANEL), model ROTOMAT 970, No. 61872 / 2-2, year 1993. Width 300cm approx. Max load per tray: 191Kg, Total load (max) 475Kgs
HANEL ROTOMAT 97061872/2-
2 1993 Kardex zone
403 4 000
Vertical storage carousel (ELECTROLUX), model IPN 4000, No. 1270, year 1994. Width 250cm approx. Robot useful load: 3150Kg, payload per slot: 150Kg
ELECTROLUX
IPN 4000 1270 1994 Kardex zone
404 4 000
Vertical storage carousel (BELLHEIMER), model IND 1610.5-2 251, No. 149/31600. Average load per tray: 212Kg. Total max load 3392KG. Width 250cm approx.
BELLHEIMER
IND 251 1610,5-2
149/31600
Kardex zone
405 3 000
Vertical storage carousel (BELLHEIMER), model IND 1610.5-2 251, No. 123/26138. Average load per tray: 212Kg. Total max load 3392KG. Width 250cm approx.
BELLHEIMER
IND 251 1610,5-2
123/26138
Kardex zone
18
406 5 000
Vertical storage carousel (BELLHEIMER), model IND 2713.5 to 12 251, No. 128/27 402. Average load per tray: 239Kg. Total max load 6453KG. Width 250cm approx.
BELLHEIMER
IND 251 2713,5-12
128/27 402
Kardex zone
407 3 000
Vertical storage carousel (BELLHEIMER), model SIS 181 2113.75 46, No. 90 097348/001. Load capacity per tray: 130/162 Kg max Total load 2794KG. Width 250cm approx.
BELLHEIMER
SIS 181 2113.75 46
90 097348/0
01 Kardex zone
408 3 000 Vertical storage carousel Kardex zone
409 2 000 Vertical storage carousel (BELLHEIMER), model I 105-2510-5-ND No. 021/23808
Kardex zone
410 2 000 Vertical storage carousel (BELLHEIMER), model I 105-2510-5-ND No. 021/23687
Kardex zone
411 300
1 vertical storage carousel, 4 levels, width 3600 mm, depth 1900 mm, height 2200 mm. And 3 dynamic storage carousels, with 2 levels and 4 shelves, width 1200 mm, depth 1200 mm, height 1900 mm
Kardex zone
415 7 000 Mast boom (HAULOTTE), model STAR 10, No. ME108193, 2010. Max load 200Kg, lift height 8m
HAULOTTE STAR10 ME1081
93 2010 Stock
416 3 200
Electric Forklift (CLARK), front loading, model EM20, year 1994. Cap 2 tons, lifting height 3300mm, 3-stage mast, four full wheels, 3714Kms
CLARK EM20 1994 Stock
417 3 800
Electric Forklift (CATERPILLAR), side loading, model FB20KT, cap. 2 tons, lifting height 3300mm, 3-stage mast and translator, three full wheels, year 2005
CATERPILLAR
Stock
418 4 000
Electric Forklift (CATERPILLAR), side loading, 2-stage mast, 1623 hours, model RB20K No. R20K10058, cap. 2 tons, lift height 5400mm
CATERPILLAR
Stock
419 500 Electric pallet stacker (CROWN), WF 3000 series, duplex mast, cap. 1 Tonne
WF Stock
420 300 Pallet movers (Bishamon), model ESL V40CE
BISHAMON ESL V40CE Stock
421 300 Pallet movers (Bishamon), model ESL V40CE
BISHAMON ESL V40CE Stock
422 300 Pallet movers (Bishamon), model ESL V40CE
BISHAMON ESL V40CE Stock
423 300 Pallet movers (Bishamon), model ESL V40CE
BISHAMON ESL V40CE Stock
424 250 Pallet lifter (GS), cap. 1T, lift height 50cm, No. 760027
GS 760027 Stock
425 250 Pallet truck scales, cap 2T Stock
426 100 Pallet truck, fork length 1.5 m Stock
427 100 Pallet truck, fork length 800mm, cap. 2.5T
Stock
19
428 100 Pallet truck, fork length 800mm, cap. 2T
Stock
429 100 Pallet truck, cap. 2T Stock
430 100 Pallet truck, cap. 2T Stock
431 100 Pallet truck, cap. 2.2T Stock
435 120 Manual Stackers (HYMO), model SC2-12, cap. 200Kg
HYMO SC-12 Stock
436 120 Manual Stackers (HYMO), model SC2-12, cap. 200Kg
HYMO SC-12 Stock
437 250 Workshop hoist (SHOP CRANE), model SC500A, year 2008, 500Kg
Stock
440 300 Batch of +/- 60 tool carts (CREFORM), and accessories
Stock
446 500 Lot of +/- 30 carts (CADDIE ROLL) Soldering
zone
449 2 000 35 meters of shelving, light loads, 5 levels, width 1 m, height 2 m, and 2 high metal cabinets
Kardex zone
450 3 500 Shelving for heavy loads, 3 levels, 2X36m length, frame width 1.20m, frame height 4.50m, beam 3.60 m
Stock
451 3 500 Shelving heavy load 3 levels 2X36m length, frame width 1.20m, frame height 4.50 m, beam 3.60 m
Stock
452 3 500
Shelves for light loads, 2 levels with wood duckboards, frame width 1,04 m, frame height 4.50 meters, beam 2.90 m. Approx 70 m
Stock
453 1 500
Chemicals storage cabinet, air-conditioned, holding tanks, width 2900 mm, depth 2000 mm, height 2300 mm
Outside
455 2 000 350 cartons (approx.), dimensions 1680x1100x1010 mm and 4800 mm carton 1000x1600
Stock
456 1 500 400 pallets (approx.) Outside
470 220
6 desks (metal and melamine) + separations + cells, metal cabinets (2 roll-up doors), 7 typist chairs, 4 low cabinets (metal), 1 metal filing cabinet with 4 levels, 1 table, 1 metal coat stand, 1 artificial plant
Office rooms
471 200
1 conference table (8 modules), 16 cantilever chairs (blue), 3 cabinets (metal, roll-up doors), 1 MAGIMIX NESPRESSO coffee machine, 1 black melamine unit
Office rooms
472 350
Executive's office furniture: 1 desk (walnut and melamine), 1 conference table (walnut top), 6 office chairs (5 castors black leather, wooden armrests), 1 executive chair (high back, 5 castors, black leather), 1 storage unit, 1 coat stand, 1 felt-top table with aluminum frame
Office rooms
20
473 40
1 round table (melamine), 2 deks + separation, 1 low cabinet (metal + roll-up door), 1 felt-top table with aluminum frame, one coat stand
Office rooms
474 200
Executive's office furniture: 3 tables made of a solar panel with tube feet, 10 cantilever chairs with gray fabric, 1 high chair, 1 felt-top table
Office rooms
475 400 1 designer cabinet (6 glass doors) Office rooms
476 120 6 GATEWAY LCD flat screens, HD 2250, 22 inches
Office rooms
477 60 4 GATEWAY LCD flat screen, 19 inches
Office rooms
478 60 4 parlor chairs, red fabric, 1 low table, 1 display cabinet, 3 artificial plants
Office rooms
479 15 1 desks + cell + 1 coat stand (integrated to desk), 1 desk + metal unit + chair (in a desk)
Office rooms
480 10 Desk + chair + Metal furniture Office rooms
481 100 1 paper shredder (IDEAL), 4000 wide model
Office rooms
482 60 3 metal cabinets, roll-up doors + 1 console (in a hallway)
Office rooms
483 250
7 tables (metal, melamine top), 13 chairs (PVC, gray fabric), 5 cantilever chairs (blue fabric), 10 folding chairs (PVC, black), 5 stacking chair (wood and metal), 2 round tables with central foot, 1 low unit (melamine), 1 small cabinet (melamine), 1 display cabinet (melamine base), 2 tables
Office rooms
484 80 1 projection screen (roll up) Office rooms
485 50 4 desks + separations, 6 chairs, 1 low unit (metal) and cell
Office rooms
486 150
10 desks with partitions and cells, 9 typist chairs, 1 metal cabinet with roll-up doors, 2 low metal cabinets, 2 coat stands
Office rooms
487 80
Infirmary: 1 treatment table (meal and leatherette), 1 folding stretcher, 1 metal desk (old), 2 chairs
Office rooms
488 700 2 UPS (LIEBERT) GXT 10 KVA UPS STATION TZ 30
Office rooms
21
489 150
Batch of electronic equipment: 3 parallel ports JP LINK TL PS110P, 1 PCD adapter LINK 10/100 MBPS, 1 USB adapter D LINK 2.4 ghz, 1 mini print server NETGEAR PS101 print server, 1 PC card NETGEAR 54 Mbps Wireless WG 511, 1 IDE controller card BEST PCI-X SATA II, 1 digital camera SONY DCR SX30E, 2 switches NETGEAR 16-port, 2 switches NETGEAR 16 ports, 1 USB 2.0 NETGEAR adapter, 1 switch 8 port D LINK DGS 1008D, GEM 1 switch 4 ports
Office rooms
490 40 Three sound stations POLYCOM / POLYSPAN
Office rooms
491 700 Lot 20 computers (CPU, screen, keyboards, mouse)
Office rooms
GENERAL CONDITIONS OF SALE SALES PROCEDURE Article 1 The sale is public and shall be carried out by auction. Sale of each lot should be made to the highest bidder against payment in full. In the case of a double bid, the lot shall be put back in the sale and the public invited to bid again. Article 2 The auction shall take place in the order indicated in the catalogue. The auctioneer judicial reserves the right to deviate from the order of the catalogue, combine or divide lots, or withdraw lots put up for sale where they have not attained a suitable price, even when bids are higher than the opening. Article 3 The lots are sold in the state that they are in at the time of sale, without any guarantee or right of appeal. The buyer is deemed competent and aware of the lot status. Any photos or advertising material are not contractual. The dimensions, quantities and qualities appearing in the catalogue are for information only, and are not guaranteed. PAYMENT OF THE PRICE, FEES AND TAXES
22
Article 4 Sale price is net of tax. The buyer shall pay, in addition to the sale price, buyer’s fees of 14,4 % with VAT. To be effective, the payment, shall be made either: - in cash following the current regulations, maxi 1 000 €, - by certified check or by check accompanied imperatively by a banker’s guarantee (see model attached), - by bank transfer (method of payment required for buyers outside France) The buyers outside France must pay the amount of the French VAT (20%) as deposit. This amount will be refunded on receipt of the transport document for the buyers from EU, and on receipt of the export document for the buyers outside EU. All bank fees are at the buyer’s charge. TRANSFER OF OWNERSHIP AND GUARANTEES Article 5 Buyers are responsible for lots from the time they have been sold, but the transfer of ownership shall not be made until payment has been collected. As from the date of the sale, the seller shall not be held responsible for the partial or total disappearance of the lot sold or any damages which it may incur. REMOVAL OF AUCTIONED LOTS Article 6 Removal shall be made by the buyer within the period stated in the catalogue and/or at the time the lot was put up for sale. In the case where the buyer does not remove the lots within the time limit, the seller reserves the right to have them removed and stored at the expense of the buyer, without his engaging in any responsibility whatsoever as to the state or preservation of the lots in question. Article 7 Unless otherwise stated, gas, water, steam or electricity pipes, or any other connections to the purchased lot shall be disconnected at the site of the initial join, switch, tap or reference points marked by the seller on the pipes. RESTRICTIONS CONCERNING THE SALE OF CERTAIN EQUIPMENTS Article 8 Equipment are generally sold in conformity with technical specifications and according to French legal safety standards. This conformity is attested either by a seal of conformity (put into service after 01/15/81) or a CE seal (put into service after 01/15/93) and the certificate of compliance. Article 9 If a lot does not conform to technical specifications or to French legal safety standards, this is stated in the catalogue description or during the auction. Article 10 Non compliant equipment are sold unsuitable for use in production. They will be sold as is:
1. to a person or entity intending to use the equipment outside the EC.. 2. to a person or entity having the capacity of retailer, rebuilder or collector, committing to compliance, under its
responsibility, before transfer to an operator. 3. to a professional whose business recycling components.
23
Article 11 The provisions of articles 8 to 10 are not applicable in the case of judicial sale performed after ruling ordering the liquidation of the seller. Article 12 The measures contained in articles 8 to 11 are not applicable in the case of auctions by order of the court held after the vendor has been declared legally bankrupt. OTHER CLAUSES Article 13 These conditions are deemed to be known and accepted without reservation by the buyer. Only the general conditions of sale written in the French language govern the sale; all translations are only indicative.
* * *
LUTÈCE INDUSTRIE Tél. : +33 (0)1 39 56 07 63Consultants internationaux en ventes industrielles Fax. : +33 (0)9 70 60 56 6860, rue de Castagnary English and Spanish : +33 (0)7 81 58 50 4075015 PARIS info@lutece-industrie.com
Ce dépliant photos ne présente qu’un échantillon des matériels proposés à la vente.
POUR PLUS DE DÉTAILS, VEUILLEZ TÉLÉCHARGER LE CATALOGUE SUR NOTRE SITEwww.lutece-industrie.com
CONDITIONS DE VENTE : Les conditions générales de vente sont précisées au catalogue, notamment en ce qui concerne les restrictions sur la vente des matériels non conformes aux dispositions techniques ainsi qu’aux normes de sécurité légales ou règlementaires françaises. Les lots concernés sont repérés par un astérisque dans le catalogue de vente. Le paiement des lots s’effectue au comptant majoré du montant des frais 14,4% TTC.
This photo fl yer only contains a survey of the objects to be auctioned.
FOR MORE DETAILED INFORMATION, PLEASE DOWNLOAD THE CATALOGUE ON OUR WEBSITE
www.lutece-industrie.com
FRANCE
IT
GERM
ANDORRA
BELGIUM
LUX.
SWITZERLAND
Lutè
ce In
dust
rie R
.C.S
. Par
is B
530
114
412
VISITESELIFRANCE443 Rue René CassinZI Molina la Chazotte42350 La Talaudière
Lundi 14 Décembre 2015de 9h00 à 12h00et de 14h00 à 18h00
Mardi 15 Décembre 2015de 8h00 à 12h00
VIEWINGELIFRANCE
443 Rue René CassinZI Molina la Chazotte42350 La Talaudière
Monday, December 14th 2015 from 9.00 a.m to 12.00 a.m
and from 14.00 to 18.00
Tuesday, December 15th 2015from 8.00 a.m to 12.00 a.m
LA TALAUDIÈRE
MOBILIER ET DIVERS FURNITURE AND MISC.
Mobiler divers Furniture
Nombreux PC Many PC
Onduleurs Inverters
LOTS N° 476-477-491LOTS N° 470 À 489 LOT N° 488
Paiement/ Bank details
CIC - ST ETIENNE HÔTEL DE VILLE
Code Banque Code guichet N° de compte Clé RIB
10096 18017 00043527302 30
IBAN FR7610096180170004352730230
BIC CMCIFRPP
LUTÈCE INDUSTRIE Tél. : +33 (0)1 39 56 07 63Consultants internationaux en ventes industrielles Fax. : +33 (0)9 70 60 56 6860, rue de Castagnary - 75015 PARIS info@lutece-industrie.com
CARTE D’ENREGISTREMENTREGISTRATION CARD
………………………………………………………………………………………………………………………………
………………………………………………………………………………………………………
SOCIÉTÉ / COMPANY : ………………………………………………………………………………………………………………………………………………………………………………………………………………………………
ADRESSE / ADRESS : …………………………………………………………………………………………………………………………………………………………………………………………………………………………………
CODE POSTAL / ZIP CODE : ………………………………………………………VILLE / TOWN : ……………………………………………………………………………………………………………
TÉLÉPHONE / PHONE : ……………………………………………………………………PAYS / COUNTRY : ……………………………………………………………………………………………………
TÉLÉCOPIE / FAX : ………………………………………………………………………………E-MAIL : ………………………………………………………………………………………………………………………………
NOM / LAST NAME : ………………………………………………………………………………………………
FONCTION / FUNCTION : ………………………………………………………………………………………
MOBILE : …………………………………………………………………………………………………………………………
DATE : …………………………………………………………………………………………………………………………………
SIGNATURE :
GARANTIE BANCAIRE OUI / YES £ NON / NO £BANK GARANTEE
Montant / Amount : ……………………………………………………………
ESPÈCES / CASH OUI / YES £ NON / NO £
Montant / Amount : ……………………………………………………………
CHÈQUE / CHECK OUI / YES £ NON / NO £
Pour vous enregistrer, merci de nous remettre ce for-mulaire lors des visites ou avant la vente, avec votre carte de visite si possible.
To be registered, please give us back this document during the visit or before the auction, with your bu-siness card if possible.
N° ACHETEUR / BUYER
N° TVA INTRA. / VAT NUMBER