Post on 25-Aug-2021
V0.1 | 2020-10-13
Product Overview
Vector E-Mobility Testing Solution
2
Vector E-Mobility Portfolio
Overview
MICROSAR.CHARGEEmbedded Software for EVCC
VC-EVCC-PVehicle ChargingControl Unit forPantograph Charging
VC-VCCUVehicle ChargingControl Unit
E-Mobility Measurement Solution from Vector and CSM
vSECCCommunication Board for SE
vSECClibEmbedded Software for SECC
VH5110CCS Listener
CANoe Test Package EV
CANoe Option .Smart Charging
VT7870Smart Charge Communication Test Module
vCharMCharging Station Management System
Find out more about ourE-Portfolio Solutions online
3
Vector E-Mobility Solution
Overview
Tools
CANoe.Smart Charging
CANoe Test Package EV/EVSE
VT System / VH5110
Use Cases
Analysis
Simulation
Testing
Standards
CCS
GB/T
CHAdeMO
Charging Communication
open
flexible
expandable
Characteristics
4
Overview
u Simulation
Testing
Analysis
Summary
Agenda
5
CANoe Option .Smart Charging – Features CCS
Simulation
u Full support of DIN70121 and ISO15118
u SLAC and V2G protocols
u EIM and PnC (ISO15118)
u Vehicle and charge point simulation
u Active mode: Automated message flow by using communication statemachine
u Passive mode: Free sending of fully configurable communication messages via CAPL
u Analysis and monitoring
u Online and offline analysis possible
u Interpretation of the messages in the trace window
u Transport Layer Security (TLS) via Security Manager
u TLS communication with automatic encryption and decryption
u Public Key Infrastructure (PKI) support and management of certificates
u Requires CANoe with Option .Ethernet
6
u Tool included in CANoe
u Management of PKI and certificates for ISO15118 – PnC
CANoe Option .Smart Charging – Security Manager
Simulation
7
CANoe Option .Smart Charging – Features GB/T
Simulation
u Support of GB/T 27930
u Vehicle and charge point simulation
u Trace window analysis
u Clear and compact presentation of the message flow
u Interpretation of each individual GB/T 27930 message
u Requires CANoe with Option .J1939
8
CANoe Option .Smart Charging – Planned features
Simulation
u ISO 15118-20: 2nd generation network and application protocol requirements
u New features:> ACD: Autoconnect Charging Device
> WPT: Wireless Power Transfer (Inductive Charging)
> BPT: Bidirectional Power Transfer
u First support of BPT with CANoe 15 (Q2/2021)
u ISO15118-8: Physical layer and data link layer requirements for wireless communication
u WiFi router with CANoe integration available with CANoe 15 (Q2/2021)
u CHAdeMO
u Support with CANoe 16 (Q2/2022)
9
Test hardware for physical layer
Simulation
CCS CHAdeMO and GB/T
u VT7870 u VT2816
u VT2004A
u CAN – Interface (VN or VT series)
10
VT7870– test hardware for physical layer CCS
Simulation
RJ45 socket for connection to CANoe
HomePlug Green PHY PLC chip
Error injection
u Variation of PWM signal parameters
u Variation of resistance and capacitance values
u broken wire
u open circuit
Connection of CP (control pilot) and PE
PWM communication
u According to IEC61851-1
u Simulation of charging station or vehicle
u Control via System Variables in CANoe
11
VT7970/VT7971
Simulation
HP Green PHY Qualcomm
HP Green PHY Mediatek
VT7970 SCC Module Q VT7971 SCC Module M
Available Q4 2020
12
Green PHY Configurator
Simulation
u Device selection
u Support of Qualcomm and Mediatek
u Automatic scan
u Device configuration
u Read from / Write to device
u Load from / Save to file
u Firmware update
u Direct selection of firmware version
13
Overview
Simulation
u Testing
Analysis
Summary
Agenda
14
Necessity of Conformance & Interoperability Testing
Testing
Today
Any number of
test combinations
possible: n x m !
Tomorrow
Testing against
test system
CCTS = CharIN CCS Test System
Manual testing
u Implementation vs. Implementation
u Good case only
u Not feasible for growing market
Automated testing
u Test Cases vs. Implementation
u Good and error cases
u Scalable for growing market
15
Overview
Testing
u Test cases implemented with vTESTstudio(test tables / CAPL)
u Delivery includes source code (complete vTESTstudio project)
u Test execution and HW control with CANoe
u Support of all standards (CCS, GB/T and CHAdeMO)
u Subscription license (period 12 months)
u A
u Every standard is available with separate license
u CTP EV – CCS
u CTP EV – GB/T
u CTP EV – CHAdeMO
CANoe Test Package EV provides conformance/interoperability tests for electric vehicles (EV)
16
Content and Releases
Testing
u Content available with current release (3.0)
u CCS> Test cases from DIN 70122
> Test cases from ISO 15118-4 (partly)
u GB/T 34658> Test cases from GB/T 34658 (complete)
u Planning next releases (3.1 and 3.2)
u All relevant test cases ISO 15118-4 DC available> test cases for sleep mode and renegotiation available with
later releases
u Release dates: Q4 2020
u Support of CHAdeMO
u Test cases for CHAdeMO will be available with later releases
CCS GB/T CHAdeMO
DIN 70122 GB/T 34658 CHAdeMO 2.0
ISO 15118-4/-5
IEC 61851-1
CANoe Test Package EV
17
Overview standards
Testing
Communication Spec. Conformance Spec. Support by CTP EV Number of EV test cases
ISO 15118-2 ISO 15118-4ISO 15118-4 Ed2 (not released)
Partial Support 504
ISO 15118-3 ISO 15118-5 2021 96
DIN 70121 DIN 70122 Partial Supported(DIN Amendments in 2021,
not yet released by DIN)
263
IEC 61851-1/23 CharIN CCS Basic test case specifications (DIN & ISO)
2021 6 + ?
GB/T 27930 (2015) GB/T 34658 Full Support 42 + 58
CHAdeMO 2.0 Test Specification for CHAdeMO Charger Version 1.0.1
Q2 2021 97
Total: 1002 EV-TestCases
18
Requirements
Testing
u Requirements (CTP EV - CCS)
u CANoe 12.0 SP4 (or later) with the Options .Smart Charging and .Ethernet
u vTESTstudio 4.0 SP3 or later
u VT System with VT7870 (interface hardware for communication)
u Integration of third-party hardware (power sink/source)
u Requirements (CTP EV – GB/T)
u CANoe 13.0 (or later) with the Options .Smart Charging and .J1939
u vTESTstudio 4.0 SP3 or later
u VT System with VT6104A (interface hardware for CAN communication), VT2004 and VT2816 (charger and vehicle coupler simulation)
u Integration of third-party hardware (power sink/source)
19
Setup generator
Testing
u Selection of protocol
u Extraction of test cases as vTESTstudio project
u Generation of ready-to-run CANoeconfiguration with test cases and simulated EV
u Setting of output folder for vTESTstudioproject and CANoe installation folder
20
vTESTstudio (example DIN70122)
Testing
u Implementation with test tables and CAPL
u Preparation and completion customizable to SUT
u Arrangement of test cases according to test specification
u Consideration of CharIN implementation guide
u Traceability to requirements from protocol specification
u Visibility of variant dependencies (PICS/PIXIT)
21
CANoe (example DIN70122)
Testing
u Tracing of communication
u Interpretation of message details
u Selection of testcases for execution
u Setting of variant dependencies (PICS/PIXIT) for different SUT
PICS = protocol implementation conformance statement
PIXIT = protocol implementation extra information for testing
22
CANoe (example GB/T 34658)
Testing
u Tracing of communication
u Interpretation of message details
u Selection of testcases for execution
u Delivery with BMS simulation
23
Integration Levels
Testing
Testing on all levels
u Testing already possible on software level withvVIRTUALtarget
u Continuous usage of CANoe Test Package EV on all levels possible
24
Test hardware for CCS
Testing
u VT7870 is supported by default
u Usage of 3rd party hardware possible …
u Via CharIN API supported by the CANoe Test Package EV
u Via direct integration (e.g. source/sink) by using generally supported interfaces in CANoe (e.g. LXI)
u Easy extension with additional I/O hardware possible
u Scalable test hardware
u from component test (ECU) with VT System
u to system test (EV) with Vector CCTS
Vector CCTS
Vector VT System
CCTS = CharIN CCS Test System
25
Example of CCTS
Testing
u Mains connection unit
u Emergency stop, residual current circuit breaker, circuit breaker, main switch
u Communication and control unit
u Based on modular hardware – VT System
u Handling of charging communication
u Control of PP resistance, inlet locking, etc.
u Inlet
u Connection to EVSE
u Outlet
u Connection to EV
u Removable cable
u Power unit (DC only)
u Bidirectional, operates as sink or source
u External device controlled by CANoe
u small package size due power feedback to grid
26
Overview
Simulation
Testing
u Analysis
Summary
Agenda
27
VH5110 – CCS Listener
Analysis
Device VH5110 – CCS Listener
Function Passive tracing of communication between EV and EVSE
SUT connection Control Pilot (direct, no Man-in-the-middle)
CP coupling - conductive (CP, PE via BNC connector) - inductive (adapter around charging cable)
Host connection Ethernet (via RJ45 connector)
Power supply 12V (via MQS connector)
Supported protocols DIN70121, ISO15118, IEC61851, HomePlug GreenPHY
Software requirements CANoe 12.0 SP3 (or later)with options .Ethernet and .SmartCharging
Scope of delivery VH5110, quick start guide, power supply cable (MQS connector to 4mm banana plugs)
28
VH5110 - Connectors
Analysis
Host connection to CANoe via Ethernet
Power supply 12V
(cable included in scope of delivery)
Connection to Control Pilot (CP)
Example of inductive coupler for CP (not included in scope of delivery)
29
VH5110 - Representation of PLC communication in CANoe
Analysis
Communication between PLC nodes
Communication between EV and EVSE
Time synchronization to other CANoe windows
Trace Window
30
VH5110 - Representation of PWM communication in CANoe
Analysis
Data Window
Graphic Window
PWM parameters (current values) as System Variables via polling
PWM parameters displayed with time dependency
Time synchronization to other CANoewindows
31
VH5110 – TLS decryption
Analysis
Solution Description Available
NULL Cipher Enable ‘NULL Cipher’ on EV and EVSE side to transfer unencrypted messages.
CANoe 13.0 SP2
MasterSecret in SecurityManager Set MasterSecret and Client Random manually in the Vector Security Manager.
CANoe 13.0 SP2
MasterSecret via CAPL-Code You can receive the MasterSecret via diagnostic, CAN-message or other interfaces and set the MasterSecret via CAPL-Code in CANoe.
CANoe 14.0
MasterSecret via UDP Frame The MasterSecret will be transmitted via UDP-Frame and CANoe will automatically decrypt the Trace.
CANoe 14.0
MasterSecret in Log-File The MasterSecret can be stored in the Log-File CANoe 14.0
32
Overview
Simulation
Testing
Analysis
u Summary
Agenda
33
Thank you for your attention !
Questions and Answers
Summary
34 © 2019. Vector Korea IT Inc. All rights reserved. Any distribution or copying is subject to prior written approval by Vector. V0.1 | 2020-10-13
Author:Seok, Jin-WookVector Korea
For more information about Vectorand our products please visit
www.vector.com