Post on 14-Aug-2020
If you need further assistance, or to reserve a document camera, please contact Media Services/Classroom Support via phone
434.592.3649 or email at mediaservices@liberty.edu
Using a Document CameraEach bag should contain a document camera, a power cord, and an extra VGA cable.1.Plug the power cable into the podium and then into the back of the document camera.
2. Plug the VGA cable from the podium into the spot on the back labeled "RGB OUTPUT".
3. Take the extra VGA cableand plug it into the left side of the document camera. There is only one slot for th cable and it is labeled "RGB INPUT".
6.On the camera, press the auto focus button.7.To switch between using the camera and your laptop/powerpoint, press the camera/ pc button.
front
BackPower cord
Right sideLeft side
5. Turn on the camera, laptop, and podium.4. Plug the other end of the VGA into your laptop.
RGB OUT