USBasp user manual

USBasp - USB programmer for Atmel AVR Controlers .

1.First of all download the USBasp driver.

Download link: usbasp-windriver.2011-05-28.zip (70 kB) or

http://www.fischl.de/usbasp/usbasp-windriver.2011-05-28.zip

2. Keep the usbasp-windriver.2011-05-28.zip in any drive of

your pc and extract the zip folder.

3.Connect the USBasp programmer with computer.

4.Open device manager.

5. Then you will see like following picture. If you don’t see

usbasp with yellow marking restart your pc and connect again

6.Right click on USBasp.

Select “Update Driver Software”

7.

8.

9.Click Next and wait…….

10.Driver software will be successfully installed and You see like

the following picture.

Program uploading images:

Designer:

Shuvangkar shuvo

EEE at BUET.

For any information just call me

mobile no: 01686051207

Fb id: https://www.facebook.com/sshuvo93