Post on 02-Mar-2021
5340MIN 5000 MID 8000,11000 MAX 14000
310
1989
545
654
(2447) (2566)
(695)
Stroke605
Truck Frame
583
Rotation Center
Mounting CenterMounting Center
32
73435 435
Max.5700Min.2260
2460
300
300
490
Stroke1720
Stroke1720
Max.5700Min.2260
Stroke1720
Stroke1720
Slewing Center
32
73435 435
300
300
490 2460
5664MIN 5000 MID 8000,11000 MAX 14000
310
1989
633
654
(2447) (2592) (2566)
(695)
Stroke605
471
Truck Frame
Crane Mounting Dimensions
Specifications Table
(Unit: mm)
NOTE
HOOK+
SLINGS+
LOAD
=
RATED LOAD
Buildings, walls, whatever, with UNIC wire-rope cranes you get precise high-lift placement and safe, sure operation. Their dependability is all in their strength and design, original UNIC features.
Higher performance, too, at lower depths. UNIC wire-rope cranes handle heavy loads in deep-hole jobs with accuracy and stability. A wide range of models assures versatile matching to job requirements.
Tight places are the right places for UNIC wire-rope cranes. In any operating situation their strong steel cables mean extra dependability and safety. High, low, or tight, UNIC wire-rope cranes are always right.
Operational advantages...High or low tight, UNIC straight-boom wire-rope cranes match the task. They're great high-lift performers, Lifting loads over walls is also no problem with their unrestricted raising and lowering. In deep-hole jobs they're strong, and accurate. Many extra safety features, too.
1. Rated loads shown in the chart are based on the crane strength with the outriggers fully extended on a film level ground and on the actual working radius including the deflection of boom.
2. The weights of hook (100 kg.), slings, and any accessories attached to the boom or loadline must be deducted from the above capacities in the chart.
3. Capacities shown must reduce in accordance with vehicle weight and loaded condition of truck, crane mounting position,and operating speed.
4. The figures in relation to the speed are on the basis of no-load running at rated oil flow conditions.
5. In accordance with our policy of constant product improvement, all specifications are subject to change without notice or obligations.
Authorized distributor
Printed in Japan C-1977(2018.03.03.MO.)
5-3, Nihonbashi 1-chome, Chuo-ku, TOKYO 103-0027 JAPANPhone: (81-3) 3231-8613 / Facsimile: (81-3) 3231-8261http://www.uniccrane-global.com/
URV1004
10,100kg×2.5m
15.6m
Min. 0.95m~Max. 13.69m
Min. 5.0m~Max. 14.0m
4
Min. -0.6˚~Max. 78˚
360˚
Crane Model
Maximum Lifting Capacity
Maximum Hook Height
Working Radius
Boom Length
Boom Sections
Boom Raising Angle
Slewing Angle (Continuous)
For Heavy-Duty truck
Maximum Lifting Capacity
10100 kg
《URV1004-CNCTS》 《URV1004-CNCT》
Truck-Mounted UNIC Crane
URV1004-CNCTSeries
Select Control Type
Standard Equipments
1
2
3
4
0 1 2 3 4 5 6 7 8 9 10 11 1312 (m)
20 1 3 4 5 6 7 8 9 10 11 12 (13.69)(0.95)
(15.6)
3456789
1011121314
210
78˚70˚
60˚50˚
40˚
30˚
20˚
10˚
0˚
1 3 42
0.95~2.5 2.7 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.69
10100
6600
9100
6600
8400
6600
5300
4100
7250
6000
5300
4100
6350
5300
4600
4100
4700
4100
4100
4300
3700
3700
3850
3400
3400
3600
3100
3100
3100
2700
2700
2300
2300
2000
2000
1800
1800 1600 1300 1000
5300(4.69m)2700(7.69m)
1600(10.69m)
Working Radius
Hei
ght A
bove
Gro
und
Working Range (m)
UNIC Crane ̶ , High safety and reliability.
Working Radius (m)
Rated Loads (kg)
URV1004 4 Section Boom
Maximum Working Radius 13.69m
Automatic Hook Stow SystemHook can be automatically retracted to stow position and released for lifting operation.
Anti Two-Block SystemA limiting device to prevent the hook from contacting the upper sheaves.
Interlock System for SlewingSlew motor is hydralically interlocked when in no use to prevent the crane from swinging when the truck is traveling.
Top Seat-Control Version《URV1004-CNCTS》
Base-Control Version《URV1004-CNCT》
Outrigger Control from Base Derrick Cylinder Pressure Alert System
Oil Cooler(with Thermostat)
Maximum Lifting Capacity 10100kg
Maximum Hook Height 15.6m
Maximum Working Radius 13.69m
Main Outrigger Max.(Hydraulic Extended) 5700mm
Rear Outrigger Max.(Hydraulic Extended) 3200mm
Wide Horizontal Extension
It alerts excessive overload and stop the crane to minimize the crane structural damage. (It does not warrant that this device protects the crane itself from the overload.)
O N : 70℃OFF : 50℃
NOTE:Top Seat-Control Version
Stow Position
5340MIN 5000 MID 8000,11000 MAX 14000
310
1989
545
654
(2447) (2566)
(695)
Stroke605
Truck Frame
583
Rotation Center
Mounting CenterMounting Center
32
73435 435
Max.5700Min.2260
2460
300
300
490
Stroke1720
Stroke1720
Max.5700Min.2260
Stroke1720
Stroke1720
Slewing Center
32
73435 435
300
300
490 2460
5664MIN 5000 MID 8000,11000 MAX 14000
310
1989
633
654
(2447) (2592) (2566)
(695)
Stroke605
471
Truck Frame
Crane Mounting Dimensions
Specifications Table
(Unit: mm)
NOTE
HOOK+
SLINGS+
LOAD=
RATED LOAD
Buildings, walls, whatever, with UNIC wire-rope cranes you get precise high-lift placement and safe, sure operation. Their dependability is all in their strength and design, original UNIC features.
Higher performance, too, at lower depths. UNIC wire-rope cranes handle heavy loads in deep-hole jobs with accuracy and stability. A wide range of models assures versatile matching to job requirements.
Tight places are the right places for UNIC wire-rope cranes. In any operating situation their strong steel cables mean extra dependability and safety. High, low, or tight, UNIC wire-rope cranes are always right.
Operational advantages...High or low tight, UNIC straight-boom wire-rope cranes match the task. They're great high-lift performers, Lifting loads over walls is also no problem with their unrestricted raising and lowering. In deep-hole jobs they're strong, and accurate. Many extra safety features, too.
1. Rated loads shown in the chart are based on the crane strength with the outriggers fully extended on a film level ground and on the actual working radius including the deflection of boom.
2. The weights of hook (100 kg.), slings, and any accessories attached to the boom or loadline must be deducted from the above capacities in the chart.
3. Capacities shown must reduce in accordance with vehicle weight and loaded condition of truck, crane mounting position,and operating speed.
4. The figures in relation to the speed are on the basis of no-load running at rated oil flow conditions.
5. In accordance with our policy of constant product improvement, all specifications are subject to change without notice or obligations.
Authorized distributor
Printed in Japan C-1977(2018.03.03.MO.)
5-3, Nihonbashi 1-chome, Chuo-ku, TOKYO 103-0027 JAPANPhone: (81-3) 3231-8613 / Facsimile: (81-3) 3231-8261http://www.uniccrane-global.com/
URV1004
10,100kg×2.5m
15.6m
Min. 0.95m~Max. 13.69m
Min. 5.0m~Max. 14.0m
4
Min. -0.6˚~Max. 78˚
360˚
Crane Model
Maximum Lifting Capacity
Maximum Hook Height
Working Radius
Boom Length
Boom Sections
Boom Raising Angle
Slewing Angle (Continuous)
For Heavy-Duty truck
Maximum Lifting Capacity
10100 kg
《URV1004-CNCTS》 《URV1004-CNCT》
Truck-Mounted UNIC Crane
URV1004-CNCTSeries