Post on 26-Nov-2020
UBS NETWORK SYSTEM INSTALLATION- (For USB Device)
CONTENTS PAGE
1) System requirement 22) Check list 33) Win95 /98 /ME Installation 4 ~54) Windows NT 4x / Nt Workstation Installation 6 5) Windows 2000 / 2000 Pro./ Windows XP Installation 7 ~106) Error Code 11
Page 1Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
System Requirement
Server
Pentium II 300MHZ or above At least 500 MB harddisk spaces 64 Ram memory and above 10 /100 mbps base network card 10 /100 mbps base hubs / Switch (8 /16/24 ports) UTP cable (RJ 45) or BNC cable USB port
Workstation
Pentium II 300MHZ or above 16 Ram memory and above At least 500 MB harddisk spaces 10 /100 mbps base network card
UBS Software
This note covers for those users only install version 9.0 dated 15 September 2003 or above
Page 2Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
Check List
Is the LAN card (Ethernet Card) already installed into the system?
Is the network cabling install properly Which version of Operating Systems (OS) installed in your
computer Installed TCP/IP protocol? Is the correct Smart Lock plugged in firmly? Is UBS system fully installed ? Changed the LAN setting in UBS Menu? Able to find the server contents through workstation? Ever try to install on another computer to do the test? What do you see in the UBS Login Menu?
Page 3Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
WIN 95 /98 /ME Installation
UBS WINDOWS Version 9.0
In server
Make sure the network protocol ‘TCP/IP’ have been properly installed. In UBS windows version , you can remove the ‘Netbeui’ protocol.
Install UBS windows version Share the UBS program folder in windows explorer as full access right.(eg
ubsacc90) Tick setting button after click on UBS system
Select windows 95 or 98 button Click on “Add USBSERVER2K.EXE” to the Startup Group” then press OK
button
Activate USB service in startup folder (click Start Programs Startup USB lan)
Page 4Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
WIN 95 /98 /ME Installation
UBS WINDOWS Version 9.0 (cont/ …)
In workstation
- For every workstation install the UBS program into local drive eg C:- Drag the shortcut from server as target name \\Servername\ubsacc90\daccount.exe- In UBS multi company table create as below.
EXAMPLE: Company Name Directory
ABC \\Servername\ubsacc90\abc\- For the report directory please set as \\servername\ubsacc90\reports\
Page 5Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
WINDOWS NT 4.x Server / Nt Workstation Installation
USB key does not support on windows Nt operating system , because Nt system didn’t build in the USB plug & play device.
Page 6Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
Windows 2000 Server/Pro ,Windows XP Home/Pro installation
UBS Windows Version 9.0
In Server
1) Make Sure the computer/Server MUST be network-connected condition.
2) Network protocol “TCP/IP” must be installed (Control Panel Network)
3) Plug-in the UBS USB Lan Lock into the USB port , this will depend on computer has such USB connection . No additional driver install and it will auto detect.
4) Installing UBS Software accordingly.
5) Next, you can click on UBS system, select Setting button.
Select either one of the Windows 2000 Server, Windows Professional or Windows XP
Click on “USB LAN Registration Version 1.0”
Page 7Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
Windows 2000 Server/Pro ,Windows XP Home/Pro installation
UBS Windows Version 9.0 (Cont /---)
6) After finish the installation, make sure you have highlighted the UBS folder and click File Sharing under Windows Explorer to share UBS folder to the correct user with FULL rights under Permissions.
7) Select Program Administrative Tools Services
8) Double click on “USBLAN_Ldr”
Page 8Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
Windows 2000 Server/Pro ,Windows XP Home/Pro installation
UBS Windows Version 9.0 (Cont /---)
9) Click on Start button and press OK button after the step done
10) The next will prompt the dialog box , select Yes button
Page 9Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
Windows 2000 Server/Pro ,Windows XP Home/Pro installation
UBS Windows Version 9.0 (Cont /---)
11) If the system prompt below, the installation is successful.
In Workstation- For every workstation install the UBS program into local drive eg C:- Drag the shortcut from server as target name \\Servername\ubsacc90\daccount.exe- In UBS multi company table create as below.
EXAMPLE: Company Name Directory
ABC \\Servername\ubsacc90\abc\- For the report directory please set as \\servername\ubsacc90\reports\
Page 10Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04
Error code
This message (refer to diagram below) indicates UBS system cannot detect the correct software for USB devices.
Solution : - You have to pluck the correct USB into the USB port
Page 11Network-install(usb).docFirst edition on 15 Sept 03Modify on 15 March 04