Post on 13-Sep-2018
U Interface Transformers forCommunications and Data Line Technology
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
Components for ISDN and LAN •
Common Mode Interface Chokes •
Interface Signal Transformers and Modules •
SO, E1/T1/PRI/CEPT, U, xDSL Interface Transformers •
SE
CT
ION
10
ntmagnetics
nuvotem
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: info@nuvotem.com
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: info@talema.de
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: talema@talema.czWeb Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: talema@talemaindia.comWeb Site: www.talemaindia.com
CONTENTS
Telecom ProductsUKO Interface Page Nr.
• THT & SMD Interface Transformers - IC Selection Guide - 3
• EPU Series - EP13 Interface Transformers in SMD & THT Styles - 4
• ISU Series - RM6, RM8 & PT23, THT & SMD Style Interface Transformers - 5 - 6
• UKF, UKV & UKH Series - THT Interface Transformers in Flat and Vertical Mount Packages - 7
• UKJ Series - SMD Interface Transformers in Flat Package - 8
UPO Interface• IC Selection Guide for AMD, Infineon & National Semiconductor - THT & SMD Interface Transformers - 9
• THT Transformers in Flat & Vertical Packages matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 - 10
• THT Transformer in Flat Package complying with Reinforced Insulation Level EN60950 & UL1950 and matched
to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chip sets - 11
• SMD Transformers in Flat Package matched to Infineon’s PEB20950 & PEB20951 and Nationals TP34 & TP3406 - 12
• SMD Interface Transformers complying with Reinforced Insulation Level EN60950 & UL1950 and matched to
Infineon’s PSB2196 & PSB2197 chip sets - 13
• UMJ Series - SMD Transformers in Flat Package matched to AMD, Infineon and National Semiconductor chip sets - 14
• UAJ - Dual SMD Interface Transformer Module matched to Infineon’s PEB2096, PEB2196 & PSB2197 chip sets - 15
• UAJ Series - SMD Interface Modules combining a transformer and a common mode choke for EMI noise
reduction - matched to AMD, Infineon and National’s chip sets - 16
• UMF & UMV Series - THT Interface Module in Flat & Vertical Packages combining a transformer and a common mode
choke for EMI noise reduction - matched to Infineon’s PEB2095 IBS and AMD’s AM2095 & AM20950 chip sets - 17 - 18
Common Mode EMI Noise Suppression Chokes• Quick Reference Guide to Common Mode Interface Chokes - 19
Tape & Reel and Dimensions - 20 - 21
Cross Reference• UKO and UPO Interface Transformer Cross Reference to VAC and IC Chip Sets - 22 -23
Talema Manufacturing Locations and Authorized Sales Representatives - 25
Visit our web site for detailed electrical and mechanical specifications for Talema’s extensive line of magneticcomponents for LAN, Ethernet & Telecom Applications - http://www.talema-nuvotem.com
U Interface Transformers for Communications and Data Line Technology
TALEMA PROFILEFounded in 1975, The TALEMA International Group hasestablished itself as a world leader in the manufacture oftoroidal transformers and related magnetic components.Our strong technical engineering expertise has contributedto the growth of our current workforce to over 1,200employees in manufacturing locations in the Czech Republicand India.
Over the years The Talema Group has succeeded indesigning, producing and delivering in excess of 50 milliontransformers to its customers. The recent incorporation ofxDSL technology into our extensive range of Telecom andLAN magnetics offerings, such as ISDN, 10Base-T, Ethernettransformers for 100/1000Base-T, has broadened ourmarket offering to an even higher level.
QUALITYThe TALEMA Group has a total commitment to quality andemploys Lean Six Sigma training for engineering,production and administrative staff to help achieve a goalof zero defects. All facilities maintain very stringent QualityControl and Quality Assurance procedurees and arecertified to and manufacture in accordance with ISO-9001:2000, TS-16949:2002 and meet a broad range ofInternational Standards including UL, VDE, IEC, and EN.
ENVIRONMENTAll TALEMA International Groupmanufacturing facil it ies are RoHScompliant and all chokes, inductors andHF components are produced in anEnvironment Management System (EMS)facility certified to ISO-14001:2004.
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
2 Sep-06
3
IC Chipsets - UKO Interface Transformer Selecton Guide
U-CINDSI OK ediuGecnerefeRssorCremrofsnarTecafretnI
.gfMCICI
rebmuNtraPoitaRsnruT)pihC:eniL(
gnidoC rebmuNtraPamelaT
HT-6MR DMS-6MR HT-8MR UPE KU
letaclA
97202/77202-CTM 52.1:00.2 T3B4 -- -- C022-USI --
97202/77202/202CTM 1:06.1 T3B4 -- G081-USI&B081-USI C081-USI B002-UPE 004-JKU
87202/67202/202CTM 1:00.2 Q1B2A071-USI1A071-USI
G071-USI&B071-USI C071-USIB004-UPEE005UPEE007-UPE
ytiregeL)DMA(
20902MA 1:23.1 T3B4 A001-USI G001-USI&B001-USI C001-USI B021-UPE
024-JKU021-FKU022-VKU023-HKU
1902MA 1:06.1 Q1B2 A011-USI G011-USI&B011-USI C011-USI -- 034-JKU
tnecuL/4627/6527/7327/4327T 1:05.1 Q1B2 -- -- C032-USI --
2627T 1:05.2 Q1B2 -- -- C021-USI --
alorotoM 675541/275541CM 1:52.1 Q1B2 -- G041-USI&B041-USI C041-USI D&B003-UPE 044-JKU
lanoitaN43PT 1:00.2 Q1B2 -- -- -- B004-UPE
1143/0143/43PT 1:05.1 Q1B2 -- G051-USI&B051-USI C051-USI --
noenifnI
1918/1908/0908/1942BEP 1:05.2 Q1B2 A012-USI -- -- B011-UPE
11942/20942/1902BEP11912BSP
1918/1908BEP1:06.1 Q1B2 A011-USI G011-USI&B011-USI C011-USI B001-UPE
001-FKU034-JKU
21918/31908/21908FEP31928/21928/31918FEP
1:00:2 Q1B2A071-USI1A071-USI
G071-USI&B071-USI C071-USIB004-UPEE005-UPEE007-UPE
20942/10942/0902BEP00908/0908BEP
1:23.1 T3B4 A001-USI G001-USI&B001-USI C001-USI B021-UPE024-JKU021-FKU022-VKU
20928/20918/20908FEP 1:06.1 T3B4 A091-USI -- 004-JKU
20928/20918/20908FEP 52.1:00.2 T3B4 -- -- C022-USI -- 012-VKU
20918/20908BEP20928/20918/20908FEP
1:08.1 T3B4 A091-USI G091-USI&B091-USI --B002-UPEE006-UPE
MTS)nosmohT(
2145/1145TS 1:05.1 Q1B2 -- G051-USI&B051-USI C051-USI --
2145/1145TS 1:00.2 Q1B2 -- -- -- B004-UPE
1702TS 1:23.1 Q1B4 A001-USI G001-USI&B001-USI C001-USI B021-UPE021-FKU022-VKU024-JKU
knilraZ B2718/2718/B1798/1798TM 1:2 esahpiB -- --- -- -- 011-FKU
Talema has designed a cost effective range of U Interface transformers for 2B1Q and 4B3T applications for equipmenttransmission between customer premises and exchanges. The transformers meet all requirements of recognized UInterface IC’s and ANSI standard T1.601 with a highly reliable pulse shape and return loss performance.
THE TALEMA GROUP • Magnetic Components for Universal Applications
4
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25)
EPU Series - UKO Interface Transformers
Features• compatibility with common transceiver IC’s ensures
maximum loop length• complies with ANSI standard T1.601 when used with
recommended chip• all materials approved to UL94V-0• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature: -40°C to +85°C• fully RoHS compliant and meets lead free
reflow level J-STD-020C
U-seireSUPE OK sremrofsnarTecafretnI
rebmuNtraPoL%8±Hm
oitaRsnruT%2±
CI:eniL
I CDAm
RCDeniL
.moNsmhO
RCDCI
.moNsmhO
LLediSeniL.xaMHμ
CC.moNFp
VP)smrV( citamehcS
A001-UPE 0.61 :56.1 1 06 4.8 2.5 08 54 0002 A
B001-UPE 0.61 :56.1 1 06 4.8 2.5 08 54 0002 B
B011-UPE 5.41 :52.1 1 06 2.8 7.6 07 05 0002 B
A021-UPE 9.7 :23.1 1 06 3.5 1.4 06 54 0002 A
B021-UPE 9.7 :23.1 1 06 3.5 1.4 06 54 0002 B
A002-UPE 51.6 :6.1 1 06 6.3 3.2 04 04 0002 A
B002-UPE 51.6 :6.1 1 06 6.3 3.2 04 04 0002 B
B003-UPE 0.82 :52.1 1 06 5.91 0.61 051 06 0002 B
D003-UPE 0.82 :52.1 1 06 5.91 0.61 051 06 0002 D
B004-UPE 0.61 :00.2 1 06 4.8 3.4 08 05 0002 B
C004-UPE 0.61 :00.2 1 06 4.8 3.4 08 05 0002 C
E005-UPE 5.41 :1:1 1 06 4.8 3.4 08 08 0002 E
E006-UPE 5.7 :9.0:9.0 1 06 4.5 0.3 09 54 0002 E
E007-UPE 5.41 :1:1 1 06 6.8 2.3 08 06 0002 E
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
Weight: 6.8 grams
Schematics
E
10
9 7
6
1
5
ICLine
D
10
9 7
6
1
2
3
ICLine
C
ICLine10
9 7
6
1
2 4
5
1
2 4
5
6
7
9
B
ICLine9
7
6
1
2 4
5
A
ICLine
TALEMA INPart NumberDate Code
•
0.547(13.60)
0.531(13.90)
0.524(13.30) max.
0.173 (4.40)
0.394(10.00)
0.394(10.00)
0.098 (2.50)
Ø 0.024 (0.60)
EPU-700E 0.709(18.00)
0.051(1.30)
0.100(2.54)
0.394(10.0)
0.675(17.15) max.
0.028(0.71)
0.516(13.11) max
0.531(13.50) max.
TALEMA INPart NumberDate Code
•
0.394(10.0)
0.098(2.50)
0.492(12.50) max.
EPU-100A - EPU-600E
5
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
Electrical Specifications @ 25°C Turns Ratio: Bold = IC side windings
U-seireSUSI OK sremrofsnarTecafretnI
traPrebmuN
snruToitaR
LP)Hm(
I CD)Am(
R UC P)smhO(
R UC S)smhO(
VP)smrV(
egakcaP citamehcS
A001-USI :23.1:23.1 1:1 7.8-1.7 06 4.5 1.4 0002 THT-6MR 1
B001-USI :23.1:23.1 1:1 7.8-1.7 06 4.5 1.4 0002 "B"-DMS-6MR 1
C001-USI :66.0:66.0 1: 7.8-1.7 06 3.2 8.1 0002 THT-8MR 2
G001-USI :23.1:23.1 1:1 7.8-1.7 06 4.5 1.4 0002 "G"-DMS-6MR 1
A011-USI :6.1:6.1 1:1 0.61-0.31 06 4.6 9.5 0002 THT-6MR 1
B011-USI :6.1:6.1 1:1 0.61-0.31 06 8.5 9.5 0002 "B"-DMS-6MR 1
C011-USI :8.0:8.0 1 0.61-0.31 06 8.3 5.2 0002 THT-8MR 2
G011-USI :6.1:6.1 1:1 0.61-0.31 06 4.6 9.5 0002 "G"-DMS-6MR 1
C021-USI :05.2 1 0.81-5.41 06 0.5 2.2 0002 THT-8MR 2
D031-USI :00.2 1 5.82-5.52 06 6.11 4.6 0002 THT-32TP 4
C031-USI :00.2 1 5.82-5.52 06 9.7 3.3 0002 THT-8MR 3
B041-USI :52.1:52.1 1:1 7.92-5.62 06 2.11 1.9 0002 "B"-DMS-6MR 1
E041-USI :52.1 1 7.92-5.62 08 0.21 0.7 0002 THT-32TP 4
C041-USI 52.1:52.1 1/1:: 7.92-5.62 08 0.6 0.4 0002 THT-8MR 3
G041-USI :52.1:52.1 1:1 7.92-5.62 06 2.11 1.9 0002 "G"-DMS-6MR 1
B051-USI :5.1:5.1 1:1 5.82-5.52 06 5.11 6.7 0002 "B"-DMS-6MR 1
D051-USI :05.1 1 5.82-5.52 06 0.02 0.3 0002 THT-32TP 5
C051-USI :57.0:57.0 1 5.82-5.52 06 0.81 5.7 0002 THT-8MR 4
G051-USI :5.1:5.1 1:1 5.82-5.52 06 5.11 6.7 0002 "G"-DMS-6MR 1
D061-USI :05.1 1 0.61-2.41 06 0.61 5.2 0002 THT-32TP 5
C061-USI 05.1 1: 0.61-2.41 06 0.5 4.3 0002 THT-8MR 2
A071-USI :1:1 1 0.61-0.31 06 2.5 3.3 0002 THT-6MR 3
1A071-USI :1:1 1 0.61-0.31 06 5.6 3.3 0002 THT-6MR 5
B071-USI :2:2 1:1 0.61-0.31 06 4.01 2.5 0002 "B"-DMS-6MR 1
C071-USI :1:1 1 0.61-0.31 06 8.3 5.2 0002 THT-8MR 2
G071-USI :2:2 1:1 0.61-0.31 06 4.01 2.5 0002 "G"-DMS-6MR 1
B081-USI :6.1:6.1 1:1 5.6-5.5 06 0.4 5.2 0002 "B"-DMS-6MR 1
G081-USI :6.1:6.1 1:1 5.6-5.5 06 0.4 5.2 0002 "G"-DMS-6MR 1
A091-USI :9.0:9.0 1 7.8-1.7 06 7.4 6.2 0002 THT-6MR 3
B091-USI :9.0:9.0 1 7.8-1.7 06 7.4 6.2 0002 "B"-DMS-6MR 3
G091-USI :9.0:9.0 1 7.8-1.7 06 7.4 6.2 0002 "G"-DMS-6MR 3
A002-USI 06.1 1:1: 2.03-5.52 06 0.01 0.21 0002 THT-6MR 4
A012-USI 1:52.1:52.1 1: 0.61-0.31 06 6.6 8.6 0002 THT-6MR 1
C022-USI :1:1 52.1 1.8-9.6 06 0.2 4.1 0002 THT-8MR 2
C032-USI :57.0:57.0 1 88-27 06 5.41 5.7 0002 THT-8MR 4
ISU Series - UKO Interface Transformers
Features• compatibility with common transceiver IC's ensures
maximum loop length• complies with ANSI standard T1.601 when used with
recommended chip• 2000 Vrms minimum isolation• industry standard footprints are available in four DIL and SMD
package options• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature: -40° to +85°C• fully RoHS compliant and meets lead free reflow
level J-STD-020C
6
THT
Package Style
RM6
RM8 - THT
PT23 - THT
Packaging Style • ISDN UKO Interface Transformers
SMD - “B” SMD - “G”
RM6 - SMD & THT Schematic
RM8 - THT Schematics
PT23 - THT Schematics
0.700(17.80)
0.150(3.81)
0.200(5.08)
0.709 max(18.00 max )
0.500(12.70)
8 7 6 5
1 2 3 4
.484(12.30)
0.866(22.00)
0.051(1.30)
0.150(3.81)
0.200 (5.08)
0.150 (3.81)
0.100 (2.54)
0.921(23.40)
0.148(3.75)
0.197(5.00)
0.709 max(18.00 max )
0.492(12.50)
8 7 6 5
1 2 3 4
0.827(21.00)
0.685(17.40)
0.504(12.80)
0.709(18.00)
0.051(1.30)
0.148(3.75)
0.197 (5.00)
0.148 (3.75)
0.100 (2.54) 0.764
(19.40)
0.024(0.60)
0.492(12.50)
0.012(0.30)
0.169(4.30)
0.024 x 0.016(0.60 x 0.40)0.984
(25.00) 0.600(15.24)
0.150(3.81)
0.200(5.08)
0.709 max(18.00 max )
0.500(12.70)
0.126(3.20)0.100(2.54) Ø .039+0.004
(1.00+0.1
- 0
1 2 3 4
8 7 6 5
- 0
0.776 max(19.70) max
0.776 max(19.70)max
7
6
8
5 1
1
2
1
2 1
0.024(0.60)
0.130±0.02 (3.3±0.5)
0.669 (17.0)
0.028 x 0.016 (0.70 x 0.40)
0.100(2.54) Ø .039 +0.006
(1.0+0.15)- 0
- 0
0.941 (23.90)
1.051 (26.70)
0.150 (3.81)
0.600(15.24)
0.445 (11.3)
0.217 (5.50)
0.800 (20.32)
10 9 8 7 6
1 2 3 4 5
4 5
7
8
9
ICLine 4
1 5
2
9
8
7
ICLine 1
2 4
5
3
2
11
2ICLine
8
57
6
7
6
5
ICLine 1
12 2
11
8
7 6
5
Line
11
23
4
IC3
2
2ICLine
7
56
8
1
4
3IC
8
76
5
Line
2
1
12
11
4ICLine
8
57
6
1
32
4
4ICLine
7
5
3
2
5IC
8
57
6
Line
THE TALEMA GROUP • Magnetic Components for Universal Applications
7
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Schematic
ISDN • UKO THT Single Interface Transformer
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side windings short circuited - measurement @100kHz, 100mVrmsCoupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrmsTest Voltage: 2.0kV for 2 Sec. = line side windings in series to IC winding
0.5kV for 2 Sec. - line side winding to line side winding
U OK sremrofsnarTecafretnI9541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwseilpmoC
traPrebmuN
oitaRsnruT%1±
LP)niMHm(
I^ CD)Am(
LL)Hμ(
CC)xaMFp(
RCD)gnidniwrepsmhO( VP
)smrV( citamehcSirP ceS
001-FKU :8.0:8.0 1 4.51-6.21 06 02 002 0.9 1.5 0002 2
501-FKU :8.0:8.0 1 4.51-6.21 06 02 002 0.9 1.5 0002 3
011-FKU :2 1 8.31-8.01 06 2 55 3.1 7.0 0002 1
021-FKU :66.0:66.0 1 9.5-5.4 06 01 051 2.5 0.4 0002 3
012-VKU :1:1 52.1 1.51-3.11 06 03 021 21 5.7 0002 3
022-VKU :66.0:66.0 1 9.5-5.4 06 51 051 2.5 0.4 0002 3
023-HKU 1:66.0:66.0 9.5-5.4 06 05 02 6.7 0.4 0003 4
UKF
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
0.018 x 0.026 (0.45 x 0.66)
0.433 (11.00) 0.059 (1.50)
0.138 (3.50)
0.492 (12.50)
0.500 (12.70)
0.400 (10.16)
0.200(5.08)
0.551(14.00)
5 6
1 10
TALEMA INWK/YR
UKF-100
Features• compatibility with common transceiver IC’s ensures
maximum loop length• complies with ANSI standard T1.601 when used with
recommended chip• all materials approved to UL94V-0• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature: -40°C to +85°C• fully RoHS compliant
2
1
10 5
6
3
8
ICLine
1
5
6
1
10
ICLine
3
6
7 9
10
1
5
ICLine
4
2
5 3
4
1
6
ICLine
0.295 (7.50)
0.583 (14.80)
0.197 (5.00)
0.591 (15.00)
1 2 3
6 5 4
0.654 (16.60)
UKH
TALEMA INWK/YR
UKH-320
0.571 (14.50) 0.079 (2.00)
0.138 (3.50)
0.024 (0.60)
UKV
0.059 (1.50)
0.138(3.50)
0.018 x 0.026 (0.45 x 0.66)
0.571 (14.50)
0.400 (10.16)
0.551 (14.00)
0.300 (7.62)
0.354(9.00)
1 5
10 6
TALEMA INWK/YR
UKV-210
8
1
5
6 7
8
1
4
ICLine
2
6
5 8
7
1
4
ICLine
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Dimensions & Schematic
Surface Coplanarity will be 0.004(0.10) maximum
ISDN - UKO SMD Single Interface Transformers
UKJSuggestedPad Layout
0° - 8°
0.020(0.50)
0.200(5.08)
0.413(10.50) 0.461
(11.70)
0.520(13.20)
0.100(2.54)
0.400(10.16)
0.654 (16.60)
0.591 (15.00)
TALEMA INWK/YR
Part Number
UtnuoMecafruS OK sremrofsnarTecafretnI9541LUdna0591LU,05906NEleveLnoitalusnIdecrofnieRhtiwseilpmoC
rebmuNtraPoitaRsnruT
%2±LP
)nimHm(LL
)Hμ(I^ CD
)Am(CC
)xaMFp()smhO(RCD VP
)smrV(citamehcS
yramirP yradnoceS004-JKU :8.0:8.0 1 2.6-6.4 01 06 051 2.5 5.3 0002 1
024-JKU :66.0:66.0 1 1.6-5.4 01 06 022 2.5 0.4 0002 1
034-JKU :8.0:8.0 1 1.51-3.11 62 06 012 4.5 3.3 0002 1
044-JKU :1:1 6.1 1.72-6.12 03 06 024 2.11 6.9 0002 2
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side winding short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side winding in series to Line side windings in series @ 10kHz, 100mVrms
0.400(10.16)
0.098 (2.50)
0.047(1.20) 0.709
(18.00)
Features• compatibility with common transceiver IC’s ensures
maximum loop length• complies with ANSI standard T1.601 when used with
recommended chip• compact sizes in surface mount package• all materials approved to UL94V-0• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature: -40°C to +85°C• fully RoHS compliant and meets lead free
reflow level J-STD-020C
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
9
CIrerutcafunaM rebmuNtraPCI
amelaTtraP
rebmuN
gnitnuoMelytS
remrofsnarT ekohC
snruToitaR
I^ CD)Am(
LP)Hm(
LL)Hμ(
CC)Fp( smrV LN
)Hm(
sremrofsnarTecafretnIDMS&HTelgniS
DMA 05902MA&5902MA
A031-FU THT 1:1 5.2: 57 7.1 6 001 0052 --
A031-VU THT 1:1 5.2: 57 7.1 6 001 0052 --
S291-JMU DMS :1:1 52.1:52.1 57 7.1 01 041 0051 --
B032-FHU THT 1:1 5.2: 001 7.1 02 02 0003 --
noenifnI
SBI5902BEP
A031-FU THT 1:1 5.2: 57 7.1 6 001 0052 --
A031-VU THT 1:1 5.2: 57 7.1 6 001 0052 --
S291-JMU DMS 52.1:52.1:1:1 57 7.1 01 041 0051 --
B032-FHU THT 5.2:1:1 001 7.1 02 02 0003 --
19502BEP&09502BEPS091-JMU DMS :1:1 1:1 57 7.1 01 081 0051 --
581-JWU DMS 2:1:1 041 7.1 01 001 0051 --
8-PIV19502BEP/PIV09502BEP S091-JMU DMS 1:1 1:1: 57 7.1 01 081 0051 --
7912BSP&6912BSPS591-JMU DMS 2:2:1:1 57 7.1 01 081 0051 --
581-JHU DMS 2:2:1:1 021 7.1 02 02 0003 --
lanoitaN 6043PT&43PTS091-JMU DMS 1:1:1:1 57 7.1 01 081 0051 --
581-JWU DMS 2:1:1 041 7.1 01 001 0051 --
remrofsnarTecafretnIDMSlauD
noenifnI 7912BSP&6912BSP,6902BEP C041-JAU DMS :1:1 2:2 57 7.1 5 051 0051 --
seludoMecafretnIDMS&HT
DMA 05902MA&5902MA
251-A031-FMU THT 1:1 5.2: 57 0.1 6 001 0051 5.1x2
271-B031-VMU THT 1:1 5.2: 57 7.1 6 001 0052 7.1x2
206-B031-VMU THT 1:1 5.2: 57 7.1 6 001 0052 0.6x2
205-A031-JAU DMS 1:1 5.2: 57 7.1 5 001 0051 0.5x2
noenifnI
SBI5902BEP
251-A031-FMU THT 1:1 5.2: 57 0.1 6 001 0051 5.1x2
271-B031-VMU THT 1:1 5.2: 57 7.1 6 001 0052 7.1x2
206-B031-VMU THT 1:1 5.2: 57 7.1 6 001 0052 0.6x2
205-A031-JAU DMS 1:1 5.2: 57 7.1 5 001 0051 0.5x2
8-PIV19502BEP/PIV09502BEP 205-A021-JAU DMS 1:1 2: 57 7.1 5 001 0051 0.5x2
7912BSP&6912BSP,6902BEP 205-B041-JAU DMS 1:1 2:2: 2:2: 2:2: 2:2: 2:2: 57 7.1 01 081 0051 0.5x2
lanoitaN 6043PT&43PT 205-A021-JAU DMS 1:1 2: 57 7.1 5 001 0051 0.5x2
IC Chipsets - UPO Interface Transformer Selection Guide
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
10
Features• matched to Infineon’s PEB2095 IBS and AMD’s AM2095
& AM20950 chipsets• excellent and consistent balance between windings• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2000, TSS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature -40° to +85°C• fully RoHS compliant
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Dimensions & Schematic
ISDN • UPO THT Single Interface Transformer
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrmsTest Voltage: 2,5kV for 1 sec. - Line side windings in series to IC winding
0,5kV for 2 sec. - Line side winding to winding
U OP sremrofsnarTecafretnIHT9541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwseilpmoC
rebmuNtraP oitaRsnruT%1±
LP)niMHm(
I^ CD)Am(
LL)Hμ(
CC)xaMFp(
RCD)gnidniwrepsmhO( VP
)smrV(irP ceS
A031-FU :1:1 5,2 7,1 57 6 001 08,0 00,2 0052
A031-VU :1:1 5,2 7.1 57 6 001 08,0 00,2 0052
UF
UV
0.059 (1.50)
0.138(3.50)
0.018 x 0.026 (0.45 x 0.66)
0.571 (14.50)
0.400 (10.16)
0.551 (14.00)
0.300 (7.62)
0.354(9.00)
1 5
10 6
TALEMA INWK/YR
UV-130A
0.018 x 0.026 (0.45 x 0.66)
0.433 (11.00) 0.059 (1.50)
0.138 (3.50)
0.492 (12.50)
0.500 (12.70)
0.400 (10.16)
0.200(5.08)
0.551(14.00)
5 6
1 10
TALEMA INWK/YRUF-130A 1
10 5
6
Line IC3
8
THE TALEMA GROUP • Magnetic Components for Universal Applications
11
Features• matched to Infineon’s PEB2095 IBS and AMD’s AM2095
& AM20950 chipsets• excellent and consistent balance between windings• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature -40° to +85°C• fully RoHS compliant
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Dimensions & Schematic
ISDN • UPO THT Single Interface Transformer
Test ConditionsInductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side windings in series to Line side windings in parallel @ 10kHz, 100mVrmsTest Voltage: 4,0kV for 2 sec. - Line side windings in series to IC winding
3,0kV for 1 min. - Line side windings in series to IC winding
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
U OP sremrofsnarTecafretnIHT0591LUdna05906NEleveLnoitalusnIdecrofnieRhtiwseilpmoC
rebmuNtraP oitaRsnruT%2±
LP)niMHm(
I^ CD)Am(
LL)Hμ(
CC)xaMFp(
RCD)gnidniwrepsmhO( VP
)smrV(irP ceS
B032-FHU :1:1 5,2 7.1 001 02 02 2.1 1.2 0004
UHF
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
0.295 (7.50)
0.583 (14.80)
0.197 (5.00)
0.591 (15.00)
1 2 3
6 5 4
0.654 (16.60)
0.571 (14.50) 0.079 (2.00)
0.138 (3.50)
0.024 (0.60)
TALEMA INWK/YR
UHF-230B
2
5 3
4
Line IC1
6
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: info@nuvotem.com
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: info@talema.de
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: talema@talema.czWeb Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: talema@talemaindia.comWeb Site: www.talemaindia.com
12
Features• matched to Infineon’s PEB20950 & PEB20951 and
National’s TP34 & TP3406 chipsets• excellent and consistent balance between windings• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature: -40° to +85°C• fully RoHS compliant and meets lead free
reflow level J-STD-020C
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
U OP sremrofsnarTecafretnIDMS9541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwseilpmoC
rebmuNtraPoitaRsnruT
%2±LP
)nimHm(LL
)Hμ(I^ CD
)Am(CC
)xaMFp()smhO(RCD VP
)smrV(yramirP yradnoceS081-JWU :1:1 4 7.1 01 041 001 5.1 2.5 0051581-JWU :1:1 2 7.1 02 041 09 5.1 0.3 0051
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Dimensions & Schematic
Surface Coplanarity will be 0.004(0.10)
ISDN - UPO SMD Single Interface Transformers
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side winding short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side winding to Line side windings in series @ 10kHz, 100mVrmsTest Voltage: 1500 V for 2 Sec. Line side windings in series to IC side winding
UWJ
0° - 8°
0.020(0.50)
0.200(5.08)
0.413(10.50) 0.461
(11.70)
0.520(13.20)
0.100(2.54)
0.400(10.16)
0.654 (16.60)
0.591 (15.00)
TALEMA INWK/YR
Part Number
0.400(10.16)
0.098 (2.50)
0.047(1.20) 0.709
(18.00)
Suggested PadLayout
6
7 9
10
ICLine1
5
THE TALEMA GROUP • Magnetic Components for Universal Applications
13
Features• matched to Infineon’s PSB2196 & PSB2197 chipsets• excellent and consistent balance between windings• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature: -40° to +85°C• fully RoHS compliant and meets lead free
reflow level J-STD-020C
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Dimensions & Schematic
Surface Coplanarity will be 0.004(0.10) maximum
ISDN - UPO SMD Single Interface Transformers
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
UHJSuggestedPad Layout
0° - 8°
0.020(0.50)
0.200(5.08)
0.413(10.50) 0.461
(11.70)
0.520(13.20)
0.100(2.54)
0.400(10.16)
0.654 (16.60)
0.591 (15.00)
TALEMA INWK/YR
Part Number
UtnuoMecafruS OP sremrofsnarTecafretnI9541LUdna0591LU,05906NEleveLnoitalusnIdecrofnieRhtiwseilpmoC
rebmuNtraPoitaRsnruT
%2±LP
)nimHm(LL
)Hμ(I^ CD
)Am(CC
)xaMFp()smhO(RCD VP
)smrV(yramirP yradnoceS581-JHU :1:1 2:2 7.1 02 021 02 3.1 3.1 0003
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side winding short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side winding in series to Line side windings in series @ 10kHz, 100mVrmsTest Voltage: 3kV for 2 sec. Line side windings to IC side windingsReinforced Insulation: Line Side in series to IC side in seriesWorking Voltage: 250Vrms
0.400(10.16)
0.098 (2.50)
0.047(1.20) 0.709
(18.00)
5
67
8
ICLine1
23
4
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: info@nuvotem.com
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: info@talema.de
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: talema@talema.czWeb Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: talema@talemaindia.comWeb Site: www.talemaindia.com
14
Features• designed for optimum compatability with all established
interface IC’s• excellent and consistent balance between windings• compact size in surface mount package• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature -40° to +85°C• fully RoHS compliant and meets lead free reflow
level J-STD-020CElectrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Dimensions & Schematic
Schematic
Surface Coplanarity will be 0.004(0.10) maximum
ISDN • UPO SMD Single Interface Transformers
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
U OP remrofsnarTecafretnI9541LUdna0591LU,059-6NEleveLnoitalusnIcisaBhtiwseilpmoC
rebmuNtraP oitaRsnruT%2±
LP)niMHm(
I^ CD)Am(
LL)Hμ(
CC)xaMFp(
RCD)gnidniwrepsmhO( VP
)smrV(irP ceS
S091-JMU :1:1 1:1 7.1 57 01 081 8.0 8.0 0051S291-JMU :1:1 52,1:52,1 7.1 57 5 041 5.0 0.1 0051S591-JMU :1:1 2:2 7.1 57 01 081 8.0 6.1 0051
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side windings in series to Line side windings in series @ 10kHz, 100mVrmsTest Voltage: 1,5kV - Line side winding in series to IC side winding in series
0° - 8°
0.020(0.50)
0.339(8.60)
0.291 (7.40)
0.433(11.00)
0.100(2.54)
0.300 (7.62)
0.472 (12.00)
0.551 (14.00)
TALEMA INWK/YR
Part Number
SuggestedPad Layout
0.102(2.60)
0.047(1.20) 0.590
(15.00)
0.300(7.62)
5
67
8
ICLine1
23
4
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: info@nuvotem.com
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: info@talema.de
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: talema@talema.czWeb Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: talema@talemaindia.comWeb Site: www.talemaindia.com
15
Features• matched to Infineon’s PEB2096, PSB2196 & PSB2197
chipsets• excellent and consistent balance between windings• compact size in surface mount package• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2001, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temberature -40° to +85°C• fully RoHS compliant and meets lead free reflow
level J-STD-020C
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
tnuoMecafruS U OP seludoMremrofsnarTecafretnI9541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwseilpmoC
rebmuNtraPsnruToitaR
%2±
LP)nimHm(
I^ CD)Am(
LL)Hμ(
CC)xaMFp(
RCD)gnidniwrepsmhO(
VP)smrV(
citamehcSirP ceS
C041-JAU :1:1 2:2 7.1 57 5 051 8.0 6.1 0051 C
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Schematic
Surface Coplanarity will be 0.004(0.10)
ISDN • UPO SMD Interface Transfomer Modules
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side winding/s short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side winding (windings in series) to Line side windings in series @ 10kHz, 100mVrmsTest Voltage: 1.5kV for 2 sec. - w1+w2 to w3+w4
0.5kV for 2 sec. - w1+w3 to w2+w4High VoltageTest: UPULSE(w1+w2 to w3+w4); 2kVOP for 10μs/700μs wave form, 10 pulses in 10 second cycle with changingpolarity.
SuggestedPad Layout
0.047(1.20)
0.100(2.54)
0.591(15.00)
0.374 (9.50)
0.700 (17.78)
Dimensions
0° -
8°
0.787 (20.00)
0.551(14.00)
0.044(1.11)
0.472(13.00)
7 x 0.100 (2,54)
TALEMA INWK/YR
Part Number
0.307(7.80)
0.354(9.00)
0.020 x 0.12(0.50 x 0.30)
13
14 15
16
CICLine
1
2 3
4
ICLine 5
6 7
8
9
10 11
12w2
w3
w4
w1 w1
w2
w3
w4
THE TALEMA GROUP • Magnetic Components for Universal Applications
16
Features• designed for optimum compatability with all established
interface IC’s• excellent and consistent balance between windings• compact size in surface mount package• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temberature -40° to +85°C• fully RoHS compliant and meets lead free reflow
level J-STD-020C
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
UtnuoMecafruS OP seludoMremrofsnarTecafretnI9541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwseilpmoC
rebmuNtraPoitaRsnruT
%2±LP
)nimHm(I^ CD
)Am(LL
)Hμ(CC
)xaMFp(
RCD)gnidniwrepsmhO( VP
)smrV(citamehcS
ekohCelbuoDLN
)Hm(RCD
)smhO(irP ceS205-A021-JAU :1:1 2 7.1 57 5 001 8.0 6.1 0051 A 5 4.0205-A031-JAU :1:1 5,2 7.1 57 5 001 5.0 0.1 0051 A 5 4.0205-B041-JAU :1:1 2:2 7.1 57 5 081 8.0 6.1 0051 B 5 4.0
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Surface Coplanarity will be 0.004(0.10) maximum
ISDN • UPO SMD Interface Transfomer Modules
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side winding/s short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side winding (windings in series) to Line side windings in series @ 10kHz, 100mVrmsTest Voltage: 1.5kV for 2 Sec. - Line side windings in series to IC side winding (IC windings in series)Inductance CM Choke: Measured @ 10kHz, 100mVrms
0.047(1.20)
0.100(2.54)
0.591(15.00)
0.374 (9.50)
0.700 (17.78)
SuggestedPad Layout
0° -
8°
0.787 (20.00)
0.551(14.00)
0.044(1.11)
0.472(13.00)
7 x 0.100 (2,54)
TALEMA INWK/YR
Part Number
0.307(7.80)
0.354(9.00)
0.020 x 0.12(0.50 x 0.30)
A
B
2
15
1
16
Line IC 8
9
5
4 3
14
2
15
1
16
ICLine 5
4 3
14
8
7 10
9
Dimensions & Schematic
THE TALEMA GROUP • Magnetic Components for Universal Applications
17
Features• matched to Infineon’s PEB2095 IBS and AMD’s
AM2095 & AM20950 chipsets• excellent and consistent balance between windings• compact size in through-hole package• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2000, TS-16949:2002
and ISO-14001:2004 certified Talema facility• operating temperature -40° to +85°C• fully RoHS compliant and meets lead free reflow
level J-STD-020C
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Dimensions & Schematic
ISDN • UPO THT Interface Transformer Module
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrmsTest Voltage: Transformer - 1,5kV for 1 sec. - Line side windings in series to IC winding
Choke - 0,5kV for 1 sec. - winding to winding
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
U OP eludoMremrofsnarTecafretnIHT9541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwseilpmoC
rebmuNtraPsnruToitaR
%1±
LP)niMHm(
I^ CD)Am(
LL)Hμ(
CC)xaMFp(
RCD)gnidniwrepsmhO( VP
)smrV( citamehcSekohCelbuoD
NL)Hm(
RCD)smhO(irP ceS
251-A031-FMU :1:1 5,2 0,1 57 6 001 13,0 56.0 0051 A 5,1 63,0
UMF
0.018 x 0.026 (0.45 x 0.66)
0.433 (11.00) 0.059 (1.50)
0.138 (3.50)
0.492 (12.50)
0.500 (12.70)
0.400 (10.16)
0.200(5.08)
0.551(14.00)
5 6
1 10
TALEMA INWK/YR
UMF-130A-152
Line IC 9
10
8
1 2
3
7
4
6
5
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: info@nuvotem.com
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: info@talema.de
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: talema@talema.czWeb Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: talema@talemaindia.comWeb Site: www.talemaindia.com
18
Features• matched to Infineon’s PEB2095 IBS and AMD’s AM2095
& AM20950 chipsets• excellent and consistent balance between windings• compact size in through-hole package• complies fully with all international standards for
U-Interface• manufactured in an ISO-9001:2000, TS-16949:2002 and
ISO-14001:2004 certified Talema facility• operating temperature -40° to +85°C• fully RoHS compliant and meets lead free reflow
level J-STD-020C
Electrical Specifications @ 25°C Turns Ratio: Bold = IC Side Windings
Dimensions: Inches (Millimeters)Tolerance: ±0.010 (0.25) unless specified otherwise
Dimensions & Schematic
ISDN • UPO THT Interface Transformer Modules
Test Conditions:Inductance: Line side windings in series - measurement @ 10kHz, 100mVrmsLeakage Inductance: Line side windings in series, IC side windings short circuited - measurement @ 100kHz, 100mVrmsCoupling Capacitance: IC side winding to Line side windings in parallel @ 10kHz, 100mVrmsTest Voltage:Transformer - 2,5kV for 1 sec. - Line side windings in series to IC winding
0,5kV for 1 sec. - Primary winding to Primary windingChoke - 0,5kV for 1 sec. - winding to winding
U OP seludoMremrofsnarTecafretnIHT9541LUdna0591LU,05906NEleveLnoitalusnIcisaBhtiwseilpmoC
rebmuNtraPsnruToitaR
%1±
LP)niMHm(
I^ CD)Am(
LL)Hμ(
CC)xaMFp(
RCD)gnidniwrepsmhO( VP
)smrV( citamehcSekohCelbuoD
NL)Hm(
RCD)smhO(irP ceS
271-B031-VMU :1:1 5,2 7,1 57 6 001 08,0 00,2 0052 B 7,1 52,0
206-B031-VMU :1:1 5,2 7.1 57 6 001 08,0 00,2 0052 B 0,6 08,0
UVM
9 10
1 18
0.413(10,50)
0.350 (8.89)
1.142(29.00)
8 x 0
.100
(2,5
4)
0.138 ±0.020 (3,50 ±0,50)
0.020 x 0.020 (0,52 x 0,52)
0.594(15.10)
0.059 (1.50)
TALEMA IN WK/YRUMV-130B-XXX
Line IC 9
10
3
4 5
16
2
17
1
18
THE TALEMA GROUP • Magnetic Components for Universal Applications
Common Mode Interface Chokes - DIL and SMD
19
Current compensated EMI noise suppressionchokes for data and signal line filteringTalema manufactures a comprehensive rangerange of common mode noise suppressionchokes designed for interfacing and reduction ofelectromagnetic inteference (EMI). These chokesprovide both differential and common mode noiseattenuation while allowing the signal to passthrough virtually undistorted. The chokes are avail-able in sizes ranging from standard to ultra min-iature in both DIL and SMD styles and offercompatability with all common footprints. Thequick reference chart shown below provides aquick overview of choices available from the broadselection being offered by Talema.
Visit our web site http://www.talema-nuvotem.com to obtain data sheets or “Current Compensated EMI Noise SuppressionChokes” brochure.
Germany: Int.+4989-841 00-0 • Ireland: Int.+35 374 - 954 8666 • Czech Rep: Int.+420 377 - 338 351 • India: Int.+91 427-244 1325 http://www.talema-nuvotem.com
sekohCecafretnIedoMnommoCDMSdnaLID
seireS ecnatcudnIegnaR
rebmuNseniLfo
gnitnuoMelytS
stcatnoC.oNhctiP&
aerAdraoB.xaM)mm(tHxLxW
teehSataD.rNegaP
eniLataDXXX-2-JTC Hm7.4-Hμ11 2DMSdaeL"J" 72.1x4 3.3x3.3x0.5 4-4
eniLrewoPS-XXX-2-JTC Hμ15-Hμ11 2
eniLataDXXX-2-JLC Hm74-Hμ5 2
DMSdaeL"J"45.2x4
8.4x4.5x9.86-5
eniLrewoPS-XXX-2-JLC Hμ15-Hμ6 2
XXX-4-JLC Hm21-Hμ11 4 72.1x8 7
XXX-2-JMC Hm74-Hμ5 2DMSdaeL"J"
45.2x43.5x8.5x0.9
9-8
XXX-4-JMC Hm21-Hμ5 4 72.1x8 01
XXX-3-JFC Hm7.4-Hμ42 3DMSdaeL"J"
45.2x6 2.7x8.7x5.1111
XXX-4-JFC Hm7.4-Hμ33 4 45.2x8 2.7x6.9x5.11
XXX-2-JSC Hm74-Hμ11 2
DMSdaeL"J". 45.2x6 5.4x6.6x0.8
31-21XXX-3-JSC Hm21-Hμ11 3
XXX-4-JSC Hm21-Hμ11 4 45.2x8 5.4x41.9x0.8
XXX-2-JCC Hm07-Hμ62 2DMSdaeL"J"
26.7x40.9x0.11x0.41 51-41
XXX-4-JCC Hm85-Hμ62 4 45.2x8
XXX-JDC Hm07-Hm0.1 2DMSdaeL"J"
61.01x47.11x2.31x6.61
81-61
XXX-JQC Hm09-Hm0.1 4 45.2x8
XXX-FDCHm07-Hm0.1
2 THT-talF61.01x4
0.11x5.21x0.41
XXX-VDC 2 THT-lacitreV 5.41x0.41x0.9
XXX-FQCHm09-Hm0.1 Hm09-Hm0.1 Hm09-Hm0.1 Hm09-Hm0.1
4 THT-talF45.2x8
0.11x5.21x0.41XXX-VQC 4 THT-lacitreV 5.41x0.41x0.9
eniLataDXXX-VKC Hm86-Hμ021 2THT-lacitreV 80.5/45.2x4 6.71x2.51x4.7
91eniLrewoPS-XXX-VKC Hm74-Hm7.4 2 02
XXX-61-JOC Hm0.5-Hμ42 61 DMSdaeL"J" 72.1x04 0.6x0.82x2.61 12E61-XXX-JUC
Hm7.4-Hμ42
4
DMSdaeL"J" 72.1x61 0.6x8.21x6.9 32-22
C61-XXX-JUC 6
D61-XXX-JUC 6
A61-XXX-JUC 8
B61-XXX-JUC 8
sretliFeniLataD 61ot2 DMSdaeL"J" suoiraV 62-42
Tape & Reel Packaging and Dimensions
epyTmmnisnoisnemiD leeR
eziSytitnauQ
)leeR/scP(ytitnauQ
)desaC/leeR(W F E P2 P0 D0 D1 P A0 B0 S0 T K0
JKU 00.23 02.41 57.1 00.2 00.4 5.1Ø 00.2Ø 00.42 55.31 59.61 04.82 04.0 03.21 23x033 002 0001/5
JWU 00.23 02.41 57.1 00.2 00.4 5.1Ø 00.2Ø 00.42 55.31 59.61 04.82 04.0 03.21 23x033 002 0001/5
JHU 00.23 02.41 57.1 00.2 00.4 5.1Ø 00.2Ø 00.42 55.31 59.61 04.82 04.0 03.21 23x033 002 0001/5
JAU 00.44 02.02 57.1 00.2 00.4 5.1Ø 00.2Ø 00.02 04.41 04.02 04.04 04.0 55.9 44x033 052 0521/5
epyTmmnisnoisnemiD leeR
eziSytitnauQ
)leeR/scP(ytitnauQ
)desaC/leeR(W F E P2 P0 D0 D1 P A0 B0 T K0
JMU 00.42 05.11 57.1 00.2 00.4 05.1Ø 05.1Ø 00.02 02.11 06.41 04.0 55.8 42x033 004 0002/5
THE TALEMA GROUP · Magnetic Components for Universal Applications
Dimensions for Carrier Tape (Unit : mm) W
±0.3
0
F±0
.10
E±0.10 P2±0.05
P0±0.10
D0
A
A P±0.10 A0±0.10
B0±
0.10
T±0.05
K0±0.10Section A-A
+0.1 -0.0
D1
+0.1 -0.0
W±0
.30 F±0
.10
E±0.10 P2±0.10 P0±0.10 A
A
D0
D1
P±0.10 A0±0.10
B0±
0.10
S0±0
.10
K0±0.10
T±0.05
Section A-A
20
Tape & Reel Packaging and Dimensions
Reel Dimensions (Unit : mm)
mmnisnoisnemiDleeR
epyT A B C N
42x033 033 42 2.02 001
23x033 033 23 2.02 001
44x033 033 44 2.02 001
THE TALEMA GROUP · Magnetic Components for Universal Applications
A
B
N C
Inner Carton Outer Carton
285
355
355
330 50
335
TALE
MA
IN
M
/Y
MM
J-10
0B-5
01
TALE
MA
IN
M
/Y
MM
J-10
0B-5
01
TALE
MA
IN
M
/Y
MM
J-10
0B-5
01
END START
Blank Components BlankMin. 160mm Min. 400mm
Drawing direction
TALE
MA
INW
k/Yr
Part
Num
ber
TALE
MA
INW
k/Yr
Part
Num
ber
TALE
MA
INW
k/Yr
Part
Num
ber
21
20
UKO Interface Transformer Cross Reference to VAC
THE TALEMA GROUP • Magnetic Components for Universal Applications
rebmuNtraPCAVamelaT
traPrebmuN
remrofsnarT
snruToitaR
I^ CD)Am(
LP)Hm(
LL)Hμ(
CC)Fp( smrV egakcaP
sremrofsnarTecafretnIDMS&HTelgniS
830X-1204M-30406T 011-FKU 1:2 06 8.31-8.01 2 55
0002 THT-talF401X-1204M-30406T 001-FKU 1:8.0:8.0 06 4.51-6.21 02 002
311X-1204M-30406T 021-FKU 1:66.0:66.0 06 9.5-5.4 01 051
911X-1204M-30406T 501-FKU 1:8.0:8.0 06 4.51-6.21 02 002
621X-5204M-30406T 022-VKU 1:66.0:66.0 06 9.5-5.4 51 0510002 THT-lacitreV
831X-5204M-30406T 012-VKU 52.1:1:1 06 1.51-3.11 03 021
530X-6904M-30406T 023-HKU 1:66.0:66.0 06 9.5-5.4 05 02 0003 THT-talF
140X-2305M-30406T 024-JKU 1:66.0:66.0 06 1.6-5.4 01 022
0002 DMS-talF940X-2305M-30406T 004-JKU 1:8.0:8.0 06 2.6-6.4 01 051
250X-2305M-30406T 034-JKU 1:8.0:8.0 06 1.51-3.11 62 012
760X-2305M-30406T 044-JKU 6.1:1:1 06 1.72-6.12 03 024
200X-6726M-30406T G041-USI 1:1:52.1:52.1 06 7.92-5.62
0002 DMS-6MR
300X-6726M-30406T G071-USI 1:1:2:2 06 0.61-0.31
400X-6726M-30406T G051-USI 1:1:5.1:5.1 06 5.82-5.52
500X-6726M-30406T G001-USI 1:1:23.1:23.1 06 7.8-1.7
600X-6726M-30406T G081-USI 1:1:6.1:6.1 06 5.6-5.5
700X-6726M-30406T G011-USI 1:1:6.1:6.1 06 0.61-0.31
110X-6726M-30406T G091-USI 1:9.0:9.0 06 7.8-1.7
540X-0926M-30406T C001-USI 1:66.0:66.0 06 7.8-1.7
0002 THT-8MR
450X-0926M-30406T C011-USI 1:8.0:8.0 06 0.61-0.31
850X-0926M-30406T C011-USI 1:8.0:8.0 06 0.61-0.31
280X-0926M-30406T C051-USI 33.0/33.0/33.0:57.0:57.0 06 5.82-5.52
190X-0926M-30406T C011-USI 1:8.0:8.0 06 0.61-0.31
200X-6926M-30406T A002-USI 1:1:6.1 06 2.03-5.52
0002 THT-6MR
410X-6926M-30406T A011-USI 1:1:6.1:6.1 06 0.61-0.31
510X-6926M-30406T A012-USI 1:1:52.1:52.1 06 0.61-0.31
520X-6926M-30406T A001-USI 1:1:23.1:23.1 06 7.8-1.7
720X-6926M-30406T 1A071-USI 1:1:1 06 0.61-0.31
230X-6926M-30406T A071-USI 1:1:1 06 0.61-0.31
530X-6926M-30406T A091-USI 1:9.0:9.0 06 7.8-1.7
100X-8926M-30406T C041-USI 1/1:52.1:52.1 08 5.82-5.62
0002 THT-8MR200X-8926M-30406T C032-USI 1:57.0:57.0 06 88-27
030X-8926M-30406T C071-USI 1:1:1 06 0.61-0.31
230X-8926M-30406T C022-USI 52.1:1:1 06 1.8-9.6
100X-4836M-30406T B001-UPE 1:56:1 06 0.61
0002 DMS-31PE
200X-4836M-30406T B021-UPE 1:23.1 06 9.7
300X-4836M-30406T B004-UPE 1:2 06 0.61
400X-4836M-30406T B002-UPE 1:6.1 06 51.6
500X-4836M-30406T B011-UPE 1:52.1 06 5.41
600X-4836M-30406T B003-UPE 1:52.1 06 0.82
420X-4836M-30406T E005-UPE 1:1:1 06 5.41
130X-4836M-30406T E006-UPE 1:9.0:9.0 06 5.7
900X-4936M-30406T E007-UPE 1:1:1 06 5.41 0002 THT-31PE
21
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
UPO Interface Transformer Cross Reference to VAC and IC Chipsets
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: info@nuvotem.com
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: info@talema.de
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: talema@talema.czWeb Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: talema@talemaindia.comWeb Site: www.talemaindia.com
rebmuNtraPCAVamelaT
traPrebmuN
remrofsnarT ekohC CI.unaM traPCI
rebmuNsnruToitaR
I^ CD)Am(
LP)Hm(
LL)Hμ(
CC)Fp( smrV LN
)Hm(
sremrofsnarTecafretnIDMS&HTelgniS
820X-1204M-30406T A031-FU 1:1 5.2: 57 7.1 6 001 0052 --noenifnI
DMASBI5902BEP
05902/5902MA
320X-5204M-30406T A031-VU 1:1 5.2: 57 7.1 6 001 0052 --noenifnI
DMASBI5902BEP
05902/5902MA
200X-4205M-30406T S291-JMU :1:1 52.1:52.1 57 7.1 01 041 0051 --noenifnI
DMASBI5902BEP
05902/5902MA
800X-4205M-30406T S091-JMU :1:1 1:1 57 7.1 01 081 0051 --noenifnInoenifnI
lanoitaN
19502/09502BEP8-PIV15902/PIV09502BEP
6043PT&43PT
220X-4205M-30406T S591-JMU 1:1 2:2: 57 7.1 01 081 0051 -- noenifnI 7912/6912BSP
620X-6904M-30406T B032-FHU :1:1 5.2 001 7.1 02 02 0003 --noenifnI
DMASBI5902BEP
05902/5902MA
580X-2305M-30406T 581-JWU :1:1 2:2 041 7.1 01 001 0051 --noenifnInoenifnI
lanoitaN
19502/09502BEP7912/6912BSP6043PT&43PT
270X-2305M-30406T 581-JHU :1:1 2:2 021 7.1 01 081 0003 -- noenifnI 7912/6912BEP
remrofsnarTecafretnIDMSlauD
310X-6205M-70406T C041-JAU :1:1 2:2 57 7.1 5 051 0051 -- noenifnI 7912/6912BSP,6902BEP
seluoMecafretnIDMS&HT
101X-1204L-70406T 251-A031-FMU 1:1 5.2: 57 0.1 6 001 0051 5.1x2noenifnI
DMASBI5902BEP
05902/5902MA
010X-1505L-70406T 206-B031-VMU 1:1 5.2: 57 7.1 6 001 0052 0.6x2noenifnI
DMASBI5902BEP
05902/5902MA
210X-1505L-70406T 271-B031-VMU 1:1 5.2: 57 7.1 6 001 0052 7.1x2noenifnI
DMASBI5902BEP
05902/5902MA
700X-6205L-70406T 205-A021-JAU 1:1 2: 57 7.1 5 001 0051 0.5x2 noenifnI 8-PIV19502/PIV09502BEP
800X-6205L-70406T 205-B041-JAU 1:1 2:2: 57 7.1 01 081 0051 0.5x2 noenifnI 7912/6912BSP,6902BEP
210X-6205L-70406T 205-A031-JAU 1:1 5.2: 57 7.1 5 001 0051 0.5x2noenifnI
DMASBI5902BEP
05902/5902MA
22
Notes
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
Authorised Talema Sales Representatives and Distributors
THE TALEMA GROUP • Worldwide Toroidal Specialists09-06
Sales & Marketing, Design and Manufacturing Facilitieshttp://www.talema-nuvotem.com
IrelandNUVOTEM TEO.CrollyCo. DonegalTel: Int. + 353 74 - 954 8666Fax: Int. + 353 74 - 954 8139Email: info@nuvotem.com
GermanyTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 - 841 00 - 0Fax: Int. + 49 89 - 841 00 25Email: info@talema.de
Eastern Europe &Czech RepublicNT MAGNETICS s.r.o.Chebská 27322 00 PlzeñTel: Int. + 420 377 - 338 351Fax: Int. + 420 377 - 338 350Email: talema@talema.czWeb Site: www.ntmagnetics.cz
IndiaTALEMA ELECTRONIC PVT. LTD.Opposite the SIDCO Industrial EstateGins Towers4/5S.H/1, Omalur Main RoadSalem - 636 004, Tamil NaduTel: Int. + 91 427 - 244 1325Fax: Int. + 91 427 - 243 0034E-mail: talema@talemaindia.comWeb Site: www.talemaindia.com
UKDELTA COMPONENTS LTD.The CourtyardSeven Acres, Smallfield RoadHorne, Surrey RH6 9JPTel: Int. + 44 1342 844 555Fax: Int. + 44 1342 844 552sales@deltacomponents.comwww.deltacomponents.com
SpainOTTO RATING S.A.Castellnou, 31-3308017 BarcelonaTel: Int.+34 93 252 2708Fax: Int.+34 93 205 6264E-mail: Info@rating.esWeb Site: www.rating.es
BeneluxISATRONICK B.V.B.A.Doolhoflaan 17B-2640 MortselTel: Int. + 32 3 448 1976Fax: Int. + 32 3 448 1195E-Mail: info@isatronick.beWeb Site: www.isatronick.be
PLZ 2 & 3 (less 35 & 36)H. J. MERCK & Co. GmbHHasenhöhe 12822587 HamburgTel: Int. + 49 40 87 08 63-0Fax: Int. + 49 40 87 08 63-33E-mail: info@hj-merck.de
ItalyTECHNOLASA ELETTRONICAVia Macello, 65/BI-39100 BolzanoTel: Int. + 39 0471 305 400Fax: Int. + 39 0471 305 444E-Mail: sales@technolasa.com
AustraliaTORTECH PTY. LTD.POB 194North Strathfield,Sydney, N.S.W. 2137Tel: Int. + 61 2 9642 6003Fax: Int. + 61 2 9642 6127E-Mail: tortech@ozemail.com.auWeb Site: www.tortech.com.au
PLZ 7BERND BIELERIndustrievertretungMax-Eyth-Straße 172379 HechingenTel: Int. + 49 7471 1804-0Fax: Int. + 49 7471 1804-10E-mail: bieler@bernd-bieler.de
Denmark & SwedenNORDTEK DANMARKHorsensvej 134DK-8300 OdderTel: Int. + 45 86 554 344Fax: Int. + 45 86 554 644E-Mail: post@nordtek.dkWeb Site: www.nordtek.dk
AustriaTALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 841 00 - 0Fax: Int. + 49 89 841 00 25Email: info@talema.de
FranceE.S.I.A5-7 Place Marcel RebuffatCourtaboeuf 7 Villejust91971 Courtaboeuf CedexTel: Int. + 33 1 6931 4410Fax: Int. + 33 1 6931 4425E-Mail: esia@wanadoo.frWeb Site: www.esia.fr
GermanyPLZ 1, 4,5, 6, 8 & 9TALEMA ELEKTRONIK GMBHSembdnerstr. 5, Postfach 252382110 GermeringTel: Int. + 49 89 841 00 - 0Fax: Int. + 49 89 841 00 25Email: info@talema.de
USAH. F. Transformers, Chokes &InductorsALFAMAG ELECTRONICS LLC945 ParkwoodPO Box 668Rolla, Missouri 65402Tel: Int.+573 364 2422Fax: Int.+573 364 5390E-Mail: sales@alfamag.comWeb Site: www.alfamag.com
50/60 Hz Toroidal TransformersAMVECO MAGNETICS, INC.11222 Richmond Ave., Suite 120Houston, TX 77042E-Mail: sales@amveco.comWeb Site: www.amveco.com
SwitzerlandBTB COMPONENTS AGIm Chlösterli 4CH-8902 UrdorfTel: Int. + 41 44 734 4888Fax: Int. + 41 44 734 4892E-mail: info@btbcomponents.ch
Sales Representatives
GermanyBÜRKLIN OHG MÜNCHENSchillerstr. 4180336 MünchenTel: Int.+49 89 558 75-0Fax: Int.+49 89 558 75-421E-Mail: info@buerklin.deWeb: www.buerklin.com
BÜRKLIN OHG DÜSSELDORFHoherweg 24540231 DüsselforfTel: Int.+49 211 9067-0Fax: Int.+49 211 9067-125E-Mail: info@buerklin.deWeb: www.buerklin.com
SCHUKAT ELECTRONICVERTRIEBS GMBHDaimlerstraße 2640789 MonheimTel: Int.+49 2173 9505Fax: Int.+49 2173 950999Web: www.schukat.com
RUTRONIK ELEKTRONISCHEBAULEMENTE GMBHIndustriestraße 275228 Ispringen/PforzheimTel: Int.+49 7231 801-0Fax: Int.+49 7231 82282E-Mail: rutronik@rutronik.comWeb: www.rutronik.com
ItalyRUTRONIK ITALIA S.r.i21, Via CalderaCentro Direzionale S.Siro20153 MilanoTel: Int.+39 02 40951 1Fax: Int.+39 02 40951 224E-Mail: MI@rutronik.comWeb: www.rutronik.com
UKRS COMPONENTS LTD.Birchington RoadCorbyNorthants, NN17 9RSTel: Int.+44 8457 201201Fax: Int.+44 845 850 9911www.rs-components.com
DistributorsSwitzerlandRUTRONIK ELEKTRONISCHEBAUELEMENTE AGHölzliwisenstraße 5CH-8604 VolketswilTel: Int.+41 44 947 3737Fax: Int.+41 44 947 3747E-Mail: rutronik_ch@rutronik.com
SummaryTOTAL PROGRAM
THE TALEMA GROUP • Magnetic Components for ISDN / xDSL / LAN Data Communications
SECTION1• TOROIDAL 50/60Hz TRANSFORMERS
SECTION 2• TOROIDAL PCB TRANSFORMERS
SECTION 3• ELEVEN GOOD REASONS TO SELECT
TALEMA TOROIDAL TRANSFORMERS
SECTION 4• CHOKES, INDUCTORS AND TRANSFORMERS
FOR POWER APPLICATIONS
SECTION 5• COMPONENTS FOR TELECOMMUNICATIONS
AND DATA LINE TECHNOLOGY
SECTION 6• CURRENT COMPENSATED EMI NOISE
SUPPRESSION CHOKES
SECTION 7• CURRENT SENSE TRANSFORMERS AND
INDUCTORS
SECTION 8• LAN MAGNETIC COMPONENTS FOR
ETHERNET APPLICATIONS
SECTION 9• TI/E1/CEPT-PRI - T3/DS3/E3/STS-1 FOR
TELECOMMUNICATION PRODUCTS
SECTION 10• U INTERFACE TRANSFORMERS FOR
COMMUNICATIONS AND DATA LINE
TECHNOLOGY
SECTION 11• TRANSFORMERS FOR BROADBAND Access
AND FIBRE CHANNEL INTERFACE
.
ntmagnetics
nuvotem