Typical PSA cabinet used in these layouts is based on a Type A, Series 400 Stainless Steel unit from Terra Universal.Catalog cut is shown below.CAD Models on the right include wheels and so are slightly taller than the catalog dimensions

04/21/23 Robin Lafever LBNL 1

Default Clean Room layout.This configuration conforms closely to that shown in the Morganti document zeropuntoquindici

04/21/23 Robin Lafever LBNL 2

Default Clean Room layout Iso view shows placement of the doors and placement of some of the assembly hardware

04/21/23 Robin Lafever LBNL 3

Default Clean Room layout drawing with basic room dimension and floor area

04/21/23 Robin Lafever LBNL 4

Extended Clean Room layout with PSA cabinets .The cabinet arrangement is arbitrary and is only one of many studied. This layout includes a separate Gowning chamber and is consistent with the desire to keep PSA storage out of traffic areas during assembly operations.

04/21/23 Robin Lafever LBNL 5

Extended Clean Room layout Iso view showing the doors and another PSA cabinet arrangement.Note the repositioning of the large equipment access door directly into the Cryostat area.

04/21/23 Robin Lafever LBNL 6

Extended Clean Room layout drawing with basic room dimension and floor area

04/21/23 Robin Lafever LBNL 7