Post on 30-Dec-2015
Trinity-LED Lighting24624 I-45 N. Ste. 200Spring, TX 77386Phone: (281) 419-7600Email: info@trinity-led.com
Date: 07-22-2014
Customer Name:Dick Poe Toyota
Submittal 1: 5 5 2014
Submittal 2: 5 23 2014
Submittal 3: 5 30 2014
Submittal 4: 7 22 2014
Job Name : Dick Poe ToyotaAddress : 6330 Montana Ave El Paso, Tx 79925
Submitted to : Goree Architects-Mr. Steven Craney, Mr. Scott Castro, Mr. Mynor Berreondo ( JJA)
ATTACHED:Layouts Other:Spec SheetsSubmittal 4- Yes
PURPOSE:Preliminary ResubmittalFinalSubmittal
Trinity-LED Lighting24624 I-45 N. Ste. 200Spring, TX 77386Phone: (281) 419-7600Email: info@trinity-led.com
Date: 07-22-2014
The Area Light is an LED outdoor rated luminaire capable of producing 66,000 lumens replacing traditional lighting up to 1500W. This fixture is a sleek, modern design that is meant to update the look from a standard shoe box fixture. Color temperatures from 2700K to 6000K are available in 80, 120 and 150 degree beam angles as well as custom optics.
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Auto dealers- Parking lots- Area lighting- Parks/recreation facilities
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Die cast aluminum housing and front frame- Innovative design accommodates up to 14 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 336 571 1000-1500W 5000 120-277 V 80
degrees
51,390 80+ 100,000 hrs+
PERFORMANCE SUMMARY
Area Light 14M
Label #: PLL-1 Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Direct Pole mount
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Area Light is an LED outdoor rated luminaire capable of producing 66,000 lumens replacing traditional lighting up to 1500W. This fixture is a sleek, modern design that is meant to update the look from a standard shoe box fixture. Color temperatures from 2700K to 6000K are available in 80, 120 and 150 degree beam angles as well as custom optics.
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Auto dealers- Parking lots- Area lighting- Parks/recreation facilities
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Die cast aluminum housing and front frame- Innovative design accommodates up to 14 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 216 367 1000-1500W 5000 120-277 V 80
degrees
33,048 80+ 100,000 hrs+
PERFORMANCE SUMMARY
Area Light 9M
Label #: PLL-2,PLL-2B,PLL4Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Direct Pole mount
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Area Light is an LED outdoor rated luminaire capable of producing 66,000 lumens replacing traditional lighting up to 1500W. This fixture is a sleek, modern design that is meant to update the look from a standard shoe box fixture. Color temperatures from 2700K to 6000K are available in 80, 120 and 150 degree beam angles as well as custom optics.
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Auto dealers- Parking lots- Area lighting- Parks/recreation facilities
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warran
HOUSING
- Die cast aluminum housing and front frame- Innovative design accommodates up to 14 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 264 448 1000-1500W 5000 120-277 V 120
degrees
40,392 80+ 100,000 hrs+
PERFORMANCE SUMMARY
Area Light 11M
Label #: PLL-3 Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Direct Pole mount
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Area Light is an LED outdoor rated luminaire capable of producing 66,000 lumens replacing traditional lighting up to 1500W. This fixture is a sleek, modern design that is meant to update the look from a standard shoe box fixture. Color temperatures from 2700K to 6000K are available in 80, 120 and 150 degree beam angles as well as custom optics.
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Auto dealers- Parking lots- Area lighting- Parks/recreation facilities
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Die cast aluminum housing and front frame- Innovative design accommodates up to 14 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 192 305 1000W 5000 120-277 V 80
degrees
28,975 80+ 100,000 hrs+
PERFORMANCE SUMMARY
Area Light 8M
Label #: PLL-5 Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Direct Pole mount
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Wall Pack cut off is an LED outdoor rated luminaire capable of producing 13,000 lumens replacing traditional lighting up to 400W. This fixture is a classic design that is meant to fit nicely on the wall and remain unobtrusive. The beam flow is directed downward in this configuration. Color temperatures from 2700K to 6000K are available.
Wall Pack – Cut Off
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Die cast aluminum housing - Molded prismatic borosilicate glass lens- Innovative design accommodates up to 4 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas- Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Wall mounted lighting- Security- Driveways
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
PERFORMANCE SUMMARY
Label #: F23Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525mA 72 122w 250w 4000 120-277 V 120 11016 80+ 100,000 hrs+
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Wall/Surface mounted
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Fiberglass Housing and Polycarbonate Latches
- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas- Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Surface mounted lighting- Canopies- Storage
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 48 44w 64w 4000 120-277V 120 4000 80+ 100,000 hrs+
PERFORMANCE SUMMARY
Label #: F18Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
2X4 Vapor Proof Outdoor
The 2 lamp 2x4 Vapor proof Outdoor is an LED luminaire capable of producing 4000 lumens and using only 44W. This fixture is a classic design that is meant to surface mount nicely and remain unobtrusive. Color temperatures from 3500K, 4000K and 5500K are available.
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
-Surface mounted
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
•The Floodlights is an LED outdoor rated luminaire capable of producing 10,000 lumens replacing traditional lighting up to 105W. This fixture is an environmentally preferable, cost-effective, maintenance-free alternative to traditional HID lighting. Color temperatures from 2700K to 6000K are available.
FL
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Die cast aluminum housing - Molded prismatic borosilicate glass lens- Innovative design accommodates up to 4 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas- Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Facade- Landscape- Displays
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525mA 72 78w 250w 4000 120-277 V 80 7298 80+ 100,000 hrs+
PERFORMANCE SUMMARY
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
Label #: FLProject: Dick Poe ToyotaDate: 07-18-14
The 3-lamp 2x4 Recessed Prismatic is an LED luminaire capable of producing 4800 lumens and using only 54W. This fixture is a classic design that is meant to fit nicely into the ceiling and remain unobtrusive. Color temperatures from 3500K, 4000K and 5500K are available. Recessed or Surface mount.
2X4 Recessed Prismatic
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- The luminaire combines a 22 gauge steel housing with a baked white polyester finish to provide optimum brightness
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Office- Workspace- Interior
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 54W 96W 4000 120-277 V 120 4800 80+ 50,000 hrs+
PERFORMANCE SUMMARY
Label #: F1Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Flush mount into ceiling- Wire/chain mount
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The 2-lamp 2x4 Recessed Prismatic is an LED luminaire capable of producing 3200 lumens and using only 36W. This fixture is a classic design that is meant to fit nicely into the ceiling and remain unobtrusive. Color temperatures from 3500K, 4000K and 5500K are available. Recessed or Surface mount.
2X4 Recessed Prismatic
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- The luminaire combines a 22 gauge steel housing with a baked white polyester finish to provide optimum brightness
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Office- Workspace- Interior
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 36W 64W 4000 120-277 V 120 3200 80+ 50,000 hrs+
PERFORMANCE SUMMARY
Label #: F1BProject: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Flush mount into ceiling- Wire/chain mount
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Down Light classic is an LED indoor rated luminaire capable of producing 3500 lumens. This fixture is a hidden design that is meant to blend into the ceiling. Color temperatures from 2700K to 6000K are available.
DL – 6” Performance
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Showroom floors- Display areas- Service canopies
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Aluminum casing mounted in ceiling- Chrome trim - Baked white flange- Frosted lens
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 24 36 100W 4000 120-277 V 80
degrees
4000 80+ 50,000 hrs+
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
PERFORMANCE SUMMARY
Label #: F3, F6CProject: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Ceiling mounted - recessed
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
TOP VIEWSIDE VIEW
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Down Light classic is an LED indoor rated luminaire capable of producing 1400 lumens. This fixture is a hidden design that is meant to blend into the ceiling. Color temperatures from 2700K to 6000K are available.
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Corridors
-Display Areas
- Parts Boutique
- Customer Lounge
RATINGS
- UL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Aluminum casing mounted in ceiling- Chrome trim (custom colors available)- Baked white flange- Frosted lens
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 18 100W 4000 120-277 V 120
degrees
1400 80+ 50,000 hrs+
PERFORMANCE SUMMARY
DL – 6” Std
Label #: F3S, F6B Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Ceiling mounted - recessed
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
1X4 Wall Mounted
WARRANTY
- 5 year manufacturer’s warranty
PERFORMANCE SUMMARY
HOUSING
- The luminaire combines a baked white finish with a clear acrylic lens to provide optimum brightness control
APPLICATIONS
- Stairwell- Workspace- Interior
RATINGS
- EtL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 36W 64W 4000 120-277 V 120 degree
3200 80+ 50,000 hrs+
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
Label #: F4Project: Dick Poe Toyota Date: 07-18-14
PART #
The 1x4 high impact acrylic lens fixture is an LED luminaire capable of producing up to 4000 lumens and using only 44W. This fixture is a classic design that is meant to fit nicely into the ceiling and remain unobtrusive. Color temperatures from 3500K, 4000K and 5500K are available. Recessed or Surface mount.
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
MOUNTING
- Wall Mount
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.```
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
CROSS SECTION:
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Down Light classic is an LED indoor rated luminaire capable of producing 1000 lumens. This fixture is a hidden design that is meant to blend into the ceiling. Color temperatures from 2700K to 6000K are available.
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Corridors
-Display Areas
- Parts Boutique
- Customer Lounge
RATINGS
- UL- Energy Star- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Aluminum casing mounted in ceiling- Chrome trim (custom colors available)- Baked white flange- Frosted lens
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
330Ma 14 100W 4000 120-277 V 120
degrees
1000 80+ 50,000 hrs+
PERFORMANCE SUMMARY
DL – 6” Std
Label #: F6Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Ceiling mounted - recessed
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Down Light classic is an LED indoor rated luminaire capable of producing 1800 lumens. This fixture is a hidden design that is meant to blend into the ceiling. Color temperatures from 2700K to 6000K are available.
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Corridors
-Display Areas
- Parts Boutique
- Customer Lounge
RATINGS
- UL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty- 10 year warranty available
HOUSING
- Aluminum casing mounted in ceiling- Chrome trim (custom colors available)- Baked white flange- Frosted lens
LUMEN MAINTENANCE
- System rating is L70 at 50,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 50,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
SMD 18 100W 4000 120-277 V 120
degrees
1450 80+ 50,000 hrs+
PERFORMANCE SUMMARY
DL – 6” Std Wet Rated
Label #: F6DProject: Dick Poe Toyota Date: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Ceiling mounted - recessed
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
8’ Suspended Fixture
Label #: F8Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Down Light classic is an LED indoor rated luminaire capable of producing 1000 lumens. This fixture is a hidden design that is meant to blend into the ceiling. Color temperatures from 2700K to 6000K are available.
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Corridors
-Display Areas
- Parts Boutique
- Customer Lounge
RATINGS
- UL- Energy Star- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Aluminum casing mounted in ceiling- Chrome trim (custom colors available)- Baked white flange- Frosted lens
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
330Ma 14 100W 4000 120-277 V 120
degrees
1000 80+ 50,000 hrs+
PERFORMANCE SUMMARY
DL – 4” Std
Label #: F10Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Ceiling mounted - recessed
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
2X2 Direct/Indirect
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
Label #: F13AProject: Dick Poe ToyotaDate: 07-18-14
PART #
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
220mA 30 48 4000 120-277 V 120 degree
2400 80+ 50,000 hrs+
APPLICATIONS
- Office- Workspace- Interior
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- The luminaire combines a matte white indirect reflector and a perforated direct lamp shield to provide optimum brightness control
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
PERFORMANCE SUMMARY
The 3-lamp 2x2 Direct/Indirect is an LED luminaire capable of producing 2400 lumens and using only 30W. This fixture is a classic design that is meant to fit nicely into the ceiling and remain unobtrusive. Color temperatures from 3500K, 4000K and 5500K are available. Recessed or Surface mount.
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Flush mount into ceiling- Wire mounted
PRODUCT DIMENSIONS
CROSS SECTION:
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
2X4 Direct/Indirect
WARRANTY
- 5 year manufacturer’s warranty
PERFORMANCE SUMMARY
HOUSING
- The luminaire combines a matte white indirect reflector and a perforated direct lamp shield to provide optimum brightness control
APPLICATIONS
- Office- Workspace- Interior
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 66 96W 4000 120-277 V 120 degree
6000 80+ 50,000 hrs+
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
Label #: F13BProject: Dick Poe ToyotaDate: 07-18-14
PART #
The 3-lamp 2x4 Direct/Indirect is an LED luminaire capable of producing up to 6000 lumens and using only 66W. This fixture is a classic design that is meant to fit nicely into the ceiling and remain unobtrusive. Color temperatures from 3500K, 4000K and 5500K are available. Recessed or Surface mount.
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
MOUNTING
- Flush mount into ceiling
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.```
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
CROSS SECTION:
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Wall Pack is an LED outdoor rated luminaire capable of producing 13,000 lumens replacing traditional lighting up to 400W. This fixture is a classic design that is meant to fit nicely on the wall and remain unobtrusive. Color temperatures from 2700K to 6000K are available.
Wall Pack-To Be Determined
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Die cast aluminum housing - Molded prismatic borosilicate glass lens- Innovative design accommodates up to 4 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas- Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Wall mounted lighting- Security- Driveways
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 48 122 200-400W 4000 120-277 V 150
degrees
11016 80+ 100,000 hrs+
PERFORMANCE SUMMARY
Label #: F16Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Wall/building mounted
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The Wall Pack is an LED outdoor rated luminaire capable of producing 13,000 lumens replacing traditional lighting up to 400W. This fixture is a classic design that is meant to fit nicely on the wall and remain unobtrusive. Color temperatures from 2700K to 6000K are available.
Wall Pack
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Die cast aluminum housing - Molded prismatic borosilicate glass lens- Innovative design accommodates up to 4 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas- Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Wall mounted lighting- Security- Driveways
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 72 122 200-400W 4000 120-277 V 120
degrees
11016 80+ 100,000 hrs+
PERFORMANCE SUMMARY
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
Label #: F17Project: Dick Poe ToyotaDate: 07-18-14
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Wall/building mounted
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The 2X4 Open Industrial is an LED luminaire capable of producing 4000 lumens and using only 44W. This fixture is a classic design. Color temperatures from 3500K, 4000K and 5500K are available. Recessed or Surface mount.
WARRANTY
- 5 year manufacturer’s warranty
2X4 Open Industrial
APPLICATIONS
- Storage- Parts department- Industrial
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
HOUSING
- 22 gauge steel housing- Lean profile 3” wide strip
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 44 64W 4000 120-277 V 120 degree
4000 80+ 50,000 hrs+
PERFORMANCE SUMMARY
Label #: F18AProject: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Surface or chain mount
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
CROSS SECTION: TOP VIEW:
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Fiberglass Housing and Polycarbonate Latches
- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature range
LED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas- Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- Custom optics are available to provide more precise distribution- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Surface mounted lighting- Canopies- Storage
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 48 44w 64w 4000 120-277V 120 4000 80+ 100,000 hrs+
PERFORMANCE SUMMARY
Label #: F18,F18ABProject: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
2X4 Vapor Proof Outdoor
The 2 lamp 2x4 Vapor proof Outdoor is an LED luminaire capable of producing 4000 lumens and using only 44W. This fixture is a classic design that is meant to surface mount nicely and remain unobtrusive. Color temperatures from 3500K, 4000K and 5500K are available.
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
-Surface mounted
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The 4 module High Bay is an LED outdoor rated luminaire capable of producing 14,000 lumens using only 153 watts. This fixture is a sleek, modern design that is meant to update the look from a standard metal halide or T8/T5 fixture. Color temperatures from 2700K to 6000K are available in 80, 120 and 150 degree beam angles as well as custom optics.
High Bay S – 2m
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Solid die cast aluminum housing and front frame- Innovative design accommodates up to 14 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature rangeLED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Manufacturing facilities- Auto dealers- Warehouses
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 48 76 150-250w 4000 120-277 V 80
degrees
7296 80+ 100,000 hrs+
PERFORMANCE SUMMARY
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
Label #: F19S Project: Dick Poe ToyotaDate: 07-18-14
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Bracket mounted (standard bracket included)
PRODUCT DIMENSIONS
TOP VIEW: SIDE VIEW:
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The 4 module High Bay is an LED outdoor rated luminaire capable of producing 14,000 lumens using only 153 watts. This fixture is a sleek, modern design that is meant to update the look from a standard metal halide or T8/T5 fixture. Color temperatures from 2700K to 6000K are available in 80, 120 and 150 degree beam angles as well as custom optics.
High Bay S – 3m
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Solid die cast aluminum housing and front frame- Innovative design accommodates up to 14 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature rangeLED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Manufacturing facilities- Auto dealers- Warehouses
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 72 115 200-400W 4000 120-277 V 80
degrees
10944 80+ 100,000 hrs+
PERFORMANCE SUMMARY
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
Label #: F19SBProject: Dick PoeToyotaDate: 07-18-14
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Bracket mounted (standard bracket included)
PRODUCT DIMENSIONS
TOP VIEW: SIDE VIEW:
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The 4 module High Bay is an LED outdoor rated luminaire capable of producing 14,000 lumens using only 153 watts. This fixture is a sleek, modern design that is meant to update the look from a standard metal halide or T8/T5 fixture. Color temperatures from 2700K to 6000K are available in 80, 120 and 150 degree beam angles as well as custom optics.
High Bay S – 4m
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Solid die cast aluminum housing and front frame- Innovative design accommodates up to 14 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature rangeLED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Manufacturing facilities- Auto dealers- Warehouses
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 96 153 150-250w 4000 120-277 V 80
degrees
14688 80+ 100,000 hrs+
PERFORMANCE SUMMARY
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
Label #: F19SDProject: Dick Poe ToyotaDate: 07-18-14
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Bracket mounted (standard bracket included)
PRODUCT DIMENSIONS
TOP VIEW: SIDE VIEW:
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The 4 module High Bay is an LED outdoor rated luminaire capable of producing 14,000 lumens using only 153 watts. This fixture is a sleek, modern design that is meant to update the look from a standard metal halide or T8/T5 fixture. Color temperatures from 2700K to 6000K are available in 80, 120 and 150 degree beam angles as well as custom optics.
High Bay S – 5m
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- Solid die cast aluminum housing and front frame- Innovative design accommodates up to 14 LED modules- Each LED module is equipped with an upper limit thermal control to ensure fixture lifetime throughout the temperature rangeLED AND OPTICAL ASSEMBLY
- Precision directional LED system provides optimized illumination for specific areas-Multiple photometric distributions using 80, 120 and 150 degrees beam angle LEDs- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Manufacturing facilities- Auto dealers- Warehouses
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
525MA 120 192 150-250w 4000 120-277 V 80
degrees
18432 80+ 100,000 hrs+
PERFORMANCE SUMMARY
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
Label #: F19SCProject: Dick Poe ToyotaDate: 07-18-14
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
MOUNTING
- Bracket mounted (standard bracket included)
PRODUCT DIMENSIONS
TOP VIEW: SIDE VIEW:
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The 1X4 WM prismatic is an LED luminaire capable of producing 2000 lumens and using only 22W. This fixture is a classic design. Color temperatures from 3500K, 4000K and 5500K are available. Recessed or Surface mount.
WARRANTY
- 5 year manufacturer’s warranty
1X4 WM Prismatic
APPLICATIONS
- Stairwell- Service Shop Work benches
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
HOUSING
- The luminaire combines a 22 gauge steel housing with a baked white polyester finish to provide optimum brightness
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 22 64W 4000 120-277 V 120 degree
2000 80+ 50,000 hrs+
PERFORMANCE SUMMARY
Label #: F21Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Surface or wall mount
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
1X4 HO 3000
WARRANTY
- 5 year manufacturer’s warranty
PERFORMANCE SUMMARY
HOUSING
- The luminaire combines a matte white indirect reflector and a perforated direct lamp shield to provide optimum brightness control
APPLICATIONS
- Office- Workspace- Interior`
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
SMD 33 4000 120-277 V 120 degree
3000 85+ 80,000 hrs+
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 85+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
LUMEN MAINTENANCE
- System rating is L70 at 80,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 80,000 hours.
PART #
The 1x4 Direct/Indirect is an LED luminaire capable of producing up to 3800 lumens. This fixture is a classic design that is meant to fit nicely into the ceiling and remain unobtrusive. Color temperatures from 3500K, 4000K and 5500K are available. Recessed or Surface mount.
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
Label #: F21BProject: Dick Poe ToyotaDate: 07-18-14
MOUNTING
- Flush mount into ceiling grid
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.```
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
The 2’ Light Bar is an LED luminaire capable of producing 480 lumens and using only 8.6W. Links together to make any run needed. Hardwire and plug in configured to allow for many adaptations. Architectural grade diffuser eliminates hot spots and ensures even distribution.
WARRANTY
- 5 year manufacturer’s warranty
2’ Strip Wall Wash Light Bar
APPLICATIONS
- Restrooms- Display Areas
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
HOUSING
- The luminaire combines is constructed with high quality extruded aluminum to provide optimum brightness.
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 18 32W 4000 120-277 V 120 degree
1650 80+ 50,000 hrs+
PERFORMANCE SUMMARY
Label #: Z1Project: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
Make any existing lighting array LED. Seamlessly integrate an LED light engine into any fixture-including the intended for metal halide, fluorescent or induction
2X4 Recessed Prismatic
RATINGS
- ETL- DLC- Temperature Rated at (-35 degrees C to +55 degrees C) (-31 degrees F to 131 degrees F)
WARRANTY
- 5 year manufacturer’s warranty
HOUSING
- The luminaire combines a 22 gauge steel housing with a baked white powder coated finish. Enhanced aluminum reflectors, 95% reflectance
LED AND OPTICAL ASSEMBLY
- LM-79m, LM-80 tests and reports are performed in accordance to IESNA standard- Utilizes high brightness LEDs, 80+ CRI at 4000K & 5000K typical. For higher CRI options consult factory
APPLICATIONS
- Office -Hospitality- School- Retail
LUMEN MAINTENANCE
- System rating is L85 at 100,000 hours.- Contact manufacturer for Lxx rating (Lumen Depreciation) beyond 100,000 hours.
DRIVE CURRENT
LEDS WATTSCOMMONLY REPLACES
KELVIN TEMP
VOLTAGEBEAM ANGLE
LUMENS CRILED
RATED LIFE
450mA 18W 64W 4000 120-277 V 120 1600 80+ 50,000 hrs+
PERFORMANCE SUMMARY
Label #: Z1BProject: Dick Poe ToyotaDate: 07-18-14
PART #
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600
ELECTRICAL
- 120-277 volt and 347-480 volt available.- System power factor is >90% and THD <20%.*- EMI: Title 47 CFR Part 15 Class A
* System power factor and THD is tested and specified at 120V input and maximum load conditions.
MOUNTING
- Flush mount into ceiling- Wire/chain mount
CONTROLS
- Dimming, Motion and Daylight sensors are available for additional energy savings.- For wireless controls please consult factory.
PRODUCT DIMENSIONS
www.trinity-led.com info@trinity-led.com TEL: (281) 419-7600